Search

CRISPR-Cas systems provide heritable acquired immunity against viruses to archaea and bacteria. Cas3 is a CRISPR-associated protein that is common to all Type I systems, possesses both nuclease and helicase activities, and is responsible for degradation of invading DNA. Involvement of Cas3 in DNA repair had been suggested in the past, but then set aside when the role of CRISPR-Cas as an adaptive immune system was realized. Here we show that in the model archaeon Haloferax volcanii a cas3 deletion mutant exhibits increased resistance to DNA damaging agents compared with the wild-type strain, but its ability to recover quickly from such damage is reduced. Analysis of cas3 point mutants revealed that the helicase domain of the protein is responsible for the DNA damage sensitivity phenotype. Epistasis analysis indicated that cas3 operates with mre11 and rad50 in restraining the homologous recombination pathway of DNA repair. Mutants deleted for Cas3 or deficient in its helicase activity showed higher rates of homologous recombination, as measured in pop-in assays using non-replicating plasmids. These results demonstrate that Cas proteins act in DNA repair, in addition to their role in defense against selfish elements and are an integral part of the cellular response to DNA damage.

The formation and persistence of DNA damage can impact biological processes such as DNA replication and transcription. To maintain genome stability and integrity, organisms rely on robust DNA damage repair pathways. Techniques to detect and locate DNA damage sites across a genome enable an understanding of the consequences of DNA damage as well as how damage is repaired, which can have key diagnostic and therapeutic implications. Importantly, advancements in technology have enabled the development of high-throughput sequencing-based DNA damage detection methods. These methods require DNA enrichment or amplification steps that limit the ability to quantitate the DNA damage sites. Further, each of these methods is typically tailored to detect only a specific type of damage. RAre DAmage and Repair (RADAR) sequencing is a DNA sequencing workflow that overcomes these limitations and enables detection and quantitation of DNA damage sites in any organism on a genome-wide scale. RADAR-seq works by replacing DNA damage sites with a patch of modified bases that can be directly detected by Pacific Biosciences Single-Molecule Real Time sequencing. Here, we present three protocols that enable detection of thymine dimers and ribonucleotides in bacterial and archaeal genomes. Basic Protocol 1 enables construction of a reference genome required for RADAR-seq analyses. Basic Protocol 2 describes how to locate, quantitate, and compare thymine dimer levels in Escherichia coli exposed to varying amounts of UV light. Basic Protocol 3 describes how to locate, quantitate, and compare ribonucleotide levels in wild-type and ΔRNaseH2 Thermococcus kodakarensis. Importantly, all three protocols provide in-depth steps for data analysis. Together they serve as proof-of-principle experiments that will allow users to adapt the protocols to locate and quantitate a wide variety of DNA damage sites in any organism. © 2022 New England Biolabs. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Constructing a reference genome utilizing SMRT sequencing Basic Protocol 2: Mapping and quantitating genomic thymine dimer formation in untreated versus UV-irradiated E. coli using RADAR-seq Basic Protocol 3: Mapping and quantitating genomic ribonucleotide incorporation in wildtype versus ΔRNaseH2 T. kodakarensis using RADAR-seq.

It has been predicted that 30-80% of archaeal genomes remain annotated as hypothetical proteins with no assigned gene function. Further, many archaeal organisms are difficult to grow or are unculturable. To overcome these technical and experimental hurdles, we have developed a high-throughput functional genomics screen that utilizes capillary electrophoresis (CE) to identify nucleic acid modifying enzymes based on activity rather than sequence homology. Here, we describe a functional genomics screening workflow to find DNA modifying enzyme activities encoded by the hyperthermophile Thermococcus kodakarensis (T. kodakarensis). Large DNA insert fosmid libraries representing a ∼5-fold average coverage of the T. kodakarensis genome were prepared in E. coli. RNA-seq showed a high fraction (84%) of T. kodakarensis genes were transcribed in E. coli despite differences in promoter structure and translational machinery. Our high-throughput screening workflow used fluorescently labeled DNA substrates directly in heat-treated lysates of fosmid clones with capillary electrophoresis detection of reaction products. Using this method, we identified both a new DNA endonuclease activity for a previously described RNA endonuclease (Nob1) and a novel AP lyase DNA repair enzyme family (termed 'TK0353') found only in a small subset of Thermococcales. The screening methodology described provides a fast and efficient way to explore the T. kodakarensis genome for a variety of nucleic acid modifying activities and may have implications for similar exploration of enzymes and pathways that underlie core cellular processes in other Archaea. IMPORTANCE This study provides a rapid, simple, high-throughput method to discover novel archaeal nucleic acid modifying enzymes by utilizing a fosmid genomic library, next-generation sequencing and capillary electrophoresis. The method described here provides details necessary to create 384-well fosmid library plates from Thermococcus kodakarensis genomic DNA, sequence 384-well fosmids plates using Illumina next generation sequencing and perform high-throughput functional read-out assays using capillary electrophoresis to identify a variety of nucleic acid modifying activities including DNA cleavage and ligation. We used this approach to identify a new DNA endonuclease activity for a previously described RNA endonuclease (Nob1) and identify a novel AP lyase enzyme (TK0353) that lacks sequence homology to known nucleic acid modifying enzymes.

Histone proteins compact and organize DNA resulting in a dynamic chromatin architecture impacting DNA accessibility and ultimately gene expression. Eukaryotic chromatin landscapes are structured through histone protein variants, epigenetic marks, the activities of chromatin-remodeling complexes, and post-translational modification of histone proteins. In most Archaea, histone-based chromatin structure is dominated by the helical polymerization of histone proteins wrapping DNA into a repetitive and closely gyred configuration. The formation of the archaeal-histone chromatin-superhelix is a regulatory force of adaptive gene expression and is likely critical for regulation of gene expression in all histone-encoding Archaea. Single amino acid substitutions in archaeal histones that block formation of tightly packed chromatin structures have profound effects on cellular fitness, but the underlying gene expression changes resultant from an altered chromatin landscape have not been resolved. Using the model organism Thermococcus kodakarensis, we genetically alter the chromatin landscape and quantify the resultant changes in gene expression, including unanticipated and significant impacts on provirus transcription. Global transcriptome changes resultant from varying chromatin landscapes reveal the regulatory importance of higher-order histone-based chromatin architectures in regulating archaeal gene expression.

Family D DNA polymerase (PolD) is the essential replicative DNA polymerase for duplication of most archaeal genomes. PolD contains a unique two-barrel catalytic core absent from all other DNA polymerase families but found in RNA polymerases (RNAPs). While PolD has an ancestral RNA polymerase catalytic core, its active site has evolved the ability to discriminate against ribonucleotides. Until now, the mechanism evolved by PolD to prevent ribonucleotide incorporation was unknown. In all other DNA polymerase families, an active site steric gate residue prevents ribonucleotide incorporation. In this work, we identify two consensus active site acidic (a) and basic (b) motifs shared across the entire two-barrel nucleotide polymerase superfamily, and a nucleotide selectivity (s) motif specific to PolD versus RNAPs. A novel steric gate histidine residue (H931 in Thermococcus sp. 9°N PolD) in the PolD s-motif both prevents ribonucleotide incorporation and promotes efficient dNTP incorporation. Further, a PolD H931A steric gate mutant abolishes ribonucleotide discrimination and readily incorporates a variety of 2′ modified nucleotides. Taken together, we construct the first putative nucleotide bound PolD active site model and provide structural and functional evidence for the emergence of DNA replication through the evolution of an ancestral RNAP two-barrel catalytic core.

RAre DAmage and Repair sequencing (RADAR-seq) is a highly adaptable sequencing method that enables the identification and detection of rare DNA damage events for a wide variety of DNA lesions at single-molecule resolution on a genome-wide scale. In RADAR-seq, DNA lesions are replaced with a patch of modified bases that can be directly detected by Pacific Biosciences Single Molecule Real-Time (SMRT) sequencing. RADAR-seq enables dynamic detection over a wide range of DNA damage frequencies, including low physiological levels. Furthermore, without the need for DNA amplification and enrichment steps, RADAR-seq provides sequencing coverage of damaged and undamaged DNA across an entire genome. Here, we use RADAR-seq to measure the frequency and map the location of ribonucleotides in wild-type and RNaseH2-deficient E. coli and Thermococcus kodakarensis strains. Additionally, by tracking ribonucleotides incorporated during in vivo lagging strand DNA synthesis, we determined the replication initiation point in E. coli, and its relation to the origin of replication (oriC). RADAR-seq was also used to map cyclobutane pyrimidine dimers (CPDs) in Escherichia coli (E. coli) genomic DNA exposed to UV-radiation. On a broader scale, RADAR-seq can be applied to understand formation and repair of DNA damage, the correlation between DNA damage and disease initiation and progression, and complex biological pathways, including DNA replication.

A variant of 9°N DNA polymerase [Genbank ID (AAA88769.1)] with three mutations (D141A, E143A, A485L) and commercialized under the name “Therminator DNA polymerase” has the ability to incorporate a variety of modified nucleotide classes. This Review focuses on how Therminator DNA Polymerase has enabled new technologies in synthetic biology and DNA sequencing. In addition, we discuss mechanisms for increased modified nucleotide incorporation.

The minichromosome maintenance (MCM) complex is the replicative helicase responsible for unwinding DNA during archaeal and eukaryal genome replication. To mimic long helicase events in the cell, a high-temperature single-molecule assay was designed to quantitatively measure long-range DNA unwinding of individual DNA helicases from the archaeons Methanothermobacter thermautotrophicus (Mth) and Thermococcus sp. 9°N (9°N). Mth encodes a single MCM homolog while 9°N encodes three helicases. 9°N MCM3, the proposed replicative helicase, unwinds DNA at a faster rate compared to 9°N MCM2 and to Mth MCM. However, all three MCM proteins have similar processivities. The implications of these observations for DNA replication in archaea and the differences and similarities among helicases from different microorganisms are discussed. Development of the high-temperature single-molecule assay establishes a system to comprehensively study thermophilic replisomes and evolutionary links between archaeal, eukaryal, and bacterial replication systems.

Reactive oxygen species drive the oxidation of guanine to 8-oxoguanine (8oxoG), which threatens genome integrity. The repair of 8oxoG is carried out by base excision repair enzymes in Bacteria and Eukarya, however, little is known about archaeal 8oxoG repair. This study identifies a member of the Ogg-subfamily archaeal GO glycosylase (AGOG) in Thermococcus kodakarensis, an anaerobic, hyperthermophilic archaeon, and delineates its mechanism, kinetics, and substrate specificity. TkoAGOG is the major 8oxoG glycosylase in T. kodakarensis, but is non-essential. In addition to TkoAGOG, the major apurinic/apyrimidinic (AP) endonuclease (TkoEndoIV) required for archaeal base excision repair and cell viability was identified and characterized. Enzymes required for the archaeal oxidative damage base excision repair pathway were identified and the complete pathway was reconstituted. This study illustrates the conservation of oxidative damage repair across all Domains of life.

High throughput DNA sequencing methodology (next generation sequencing; NGS) has rapidly evolved over the past 15 years and new methods are continually being commercialized. As the technology develops, so do increases in the number of corresponding applications for basic and applied science. The purpose of this review is to provide a compendium of NGS methodologies and associated applications. Each brief discussion is followed by web links to the manufacturer and/or web-based visualizations. Keyword searches, such as with Google, may also provide helpful internet links and information. © 2018 by John Wiley & Sons, Inc.

DNA replication and repair are essential biological processes needed for the survival of all organisms. Although these processes are fundamentally conserved in the three domains, archaea, bacteria and eukarya, the proteins and complexes involved differ. The genetic and biophysical tools developed for archaea in the last several years have accelerated the study of DNA replication and repair in this domain. In this review, the current knowledge of DNA replication and repair processes in archaea will be summarized, with emphasis on the contribution of genetics and other recently developed biophysical and molecular tools, including capillary gel electrophoresis, next-generation sequencing and single-molecule approaches. How these new tools will continue to drive archaeal DNA replication and repair research will also be discussed.

Background: Family D DNA polymerase (polD) is important for replication in most archaea, excluding Crenarchaeota. Results: We report a detailed kinetic characterization of polD nucleotide incorporation, mismatch discrimination, and 3′-5′ exonuclease hydrolysis. Conclusion: Despite evolutionary divergence, polD kinetic pathways share similarities to other DNA polymerase families. Significance: This work contributes to unifying our understanding of DNA polymerase function., Family D DNA polymerases (polDs) have been implicated as the major replicative polymerase in archaea, excluding the Crenarchaeota branch, and bear little sequence homology to other DNA polymerase families. Here we report a detailed kinetic analysis of nucleotide incorporation and exonuclease activity for a Family D DNA polymerase from Thermococcus sp. 9°N. Pre-steady-state single-turnover nucleotide incorporation assays were performed to obtain the kinetic parameters, kpol and Kd, for correct nucleotide incorporation, incorrect nucleotide incorporation, and ribonucleotide incorporation by exonuclease-deficient polD. Correct nucleotide incorporation kinetics revealed a relatively slow maximal rate of polymerization (kpol ∼2.5 s−1) and especially tight nucleotide binding (Kd(dNTP) ∼1.7 μm), compared with DNA polymerases from Families A, B, C, X, and Y. Furthermore, pre-steady-state nucleotide incorporation assays revealed that polD prevents the incorporation of incorrect nucleotides and ribonucleotides primarily through reduced nucleotide binding affinity. Pre-steady-state single-turnover assays on wild-type 9°N polD were used to examine 3′-5′ exonuclease hydrolysis activity in the presence of Mg2+ and Mn2+. Interestingly, substituting Mn2+ for Mg2+ accelerated hydrolysis rates >40-fold (kexo ≥110 s−1 versus ≥2.5 s−1). Preference for Mn2+ over Mg2+ in exonuclease hydrolysis activity is a property unique to the polD family. The kinetic assays performed in this work provide critical insight into the mechanisms that polD employs to accurately and efficiently replicate the archaeal genome. Furthermore, despite the unique properties of polD, this work suggests that a conserved polymerase kinetic pathway is present in all known DNA polymerase families.

Background: During replication, the lagging strand is synthesized discontinuously from a series of Okazaki fragments. Results: Okazaki fragment maturation was reconstituted using purified proteins from Thermococcus. Conclusion: In Thermococcus, efficient Okazaki fragment processing requires DNA polymerase B, flap endonuclease, and DNA ligase. Significance: Okazaki fragment maturation in Thermococcus shares similarities to both bacterial and eukaryotic systems., During replication, Okazaki fragment maturation is a fundamental process that joins discontinuously synthesized DNA fragments into a contiguous lagging strand. Efficient maturation prevents repeat sequence expansions, small duplications, and generation of double-stranded DNA breaks. To address the components required for the process in Thermococcus, Okazaki fragment maturation was reconstituted in vitro using purified proteins from Thermococcus species 9°N or cell extracts. A dual color fluorescence assay was developed to monitor reaction substrates, intermediates, and products. DNA polymerase D (polD) was proposed to function as the replicative polymerase in Thermococcus replicating both the leading and the lagging strands. It is shown here, however, that it stops before the previous Okazaki fragments, failing to rapidly process them. Instead, Family B DNA polymerase (polB) was observed to rapidly fill the gaps left by polD and displaces the downstream Okazaki fragment to create a flap structure. This flap structure was cleaved by flap endonuclease 1 (Fen1) and the resultant nick was ligated by DNA ligase to form a mature lagging strand. The similarities to both bacterial and eukaryotic systems and evolutionary implications of archaeal Okazaki fragment maturation are discussed.

We report the genome sequence of the dairy yeast Kluyveromyces lactis strain GG799 obtained using the Pacific Biosciences RS II platform. K. lactis strain GG799 is a common host for the expression of proteins at both laboratory and industrial scales.

We report the genome sequence of the dairy yeast Kluyveromyces lactis strain GG799 obtained using the Pacific Biosciences RS II platform. K. lactis strain GG799 is a common host for the expression of proteins at both laboratory and industrial scales.

Next-generation sequencing (NGS) is a powerful tool for genomic studies, translational research, and clinical diagnostics that enables the detection of single nucleotide polymorphisms, insertions and deletions, copy number variations, and other genetic variations. Target enrichment technologies improve the efficiency of NGS by only sequencing regions of interest, which reduces sequencing costs while increasing coverage of the selected targets. Here we present NEBNext Direct®, a hybridization-based, target-enrichment approach that addresses many of the shortcomings of traditional target-enrichment methods. This approach features a simple, 7-hr workflow that uses enzymatic removal of off-target sequences to achieve a high specificity for regions of interest. Additionally, unique molecular identifiers are incorporated for the identification and filtering of PCR duplicates. The same protocol can be used across a wide range of input amounts, input types, and panel sizes, enabling NEBNext Direct to be broadly applicable across a wide variety of research and diagnostic needs. © 2017 by John Wiley & Sons, Inc. Keywords: in-solution hybridization; Illumina library preparation; next-generation sequencing; NGS library preparation; NGS target capture; PCR enrichment; target enrichment

Incorporation of ribonucleotides during DNA replication has severe consequences for genome stability. Although eukaryotes possess a number of redundancies for initiating and completing repair of misincorporated ribonucleotides, archaea such as Thermococcus rely only upon RNaseH2 to initiate the pathway. Because Thermococcus DNA polymerases incorporate as many as 1,000 ribonucleotides per genome, RNaseH2 must be efficient at recognizing and nicking at embedded ribonucleotides to ensure genome integrity. Here, we show that ribonucleotides are incorporated by the hyperthermophilic archaeon Thermococcus kodakarensis both in vitro and in vivo and a robust ribonucleotide excision repair pathway is critical to keeping incorporation levels low in wild-type cells. Using pre-steady-state and steady-state kinetics experiments, we also show that archaeal RNaseH2 rapidly cleaves at embedded ribonucleotides (200-450 s-1), but exhibits an ∼1,000-fold slower turnover rate (0.06-0.17 s-1), suggesting a potential role for RNaseH2 in protecting or marking nicked sites for further processing. We found that following RNaseH2 cleavage, the combined activities of polymerase B (PolB), flap endonuclease (Fen1), and DNA ligase are required to complete ribonucleotide processing. PolB formed a ribonucleotide-containing flap by strand displacement synthesis that was cleaved by Fen1, and DNA ligase sealed the nick for complete repair. Our study reveals conservation of the overall mechanism of ribonucleotide excision repair across domains of life. The lack of redundancies in ribonucleotide repair in archaea perhaps suggests a more ancestral form of ribonucleotide excision repair compared with the eukaryotic pathway.

Viruses infecting hyperthermophilic archaea typically do not encode DNA polymerases, raising questions regarding their genome replication. Here, using a yeast two-hybrid approach, we have assessed interactions between proteins of Sulfolobus islandicus rod-shaped virus 2 (SIRV2) and the host-encoded proliferating cell nuclear antigen (PCNA), a key DNA replication protein in archaea. Five SIRV2 proteins were found to interact with PCNA, providing insights into the recruitment of host replisome for viral DNA replication.

Accurate DNA replication is essential for maintenance of every genome. All archaeal genomes except Crenarchaea, encode for a member of Family B (polB) and Family D (polD) DNA polymerases. Gene deletion studies in Thermococcus kodakaraensis and Methanococcus maripaludis show that polD is the only essential DNA polymerase in these organisms. Thus, polD may be the primary replicative DNA polymerase for both leading and lagging strand synthesis. To understand this unique archaeal enzyme, we report the biochemical characterization of a heterodimeric polD from Thermococcus. PolD contains both DNA polymerase and proofreading 3′–5′ exonuclease activities to ensure efficient and accurate genome duplication. The polD incorporation fidelity was determined for the first time. Despite containing 3′–5′ exonuclease proofreading activity, polD has a relatively high error rate (95 × 10−5) compared to polB (19 × 10−5) and at least 10-fold higher than the polB DNA polymerases from yeast (polε and polδ) or Escherichia coli DNA polIII holoenzyme. The implications of polD fidelity and biochemical properties in leading and lagging strand synthesis are discussed. Electronic supplementary material The online version of this article (doi:10.1007/s00792-014-0646-9) contains supplementary material, which is available to authorized users.

Since their initial characterization over 30 years ago, it has been believed that the archaeal B-family DNA polymerases are single-subunit enzymes. This contrasts with the multi-subunit B-family replicative polymerases of eukaryotes. Here we reveal that the highly studied PolB1 from Sulfolobus solfataricus exists as a heterotrimeric complex in cell extracts. Two small subunits, PBP1 and PBP2, associate with distinct surfaces of the larger catalytic subunit and influence the enzymatic properties of the DNA polymerase. Thus, multi-subunit replicative DNA polymerase holoenzymes are present in all three domains of life. We reveal the architecture of the assembly by a combination of cross-linking coupled with mass spectrometry, X-ray crystallography and single-particle electron microscopy. The small subunits stabilize the holoenzyme assembly and the acidic tail of one small subunit mitigates the ability of the enzyme to perform strand-displacement synthesis, with important implications for lagging strand DNA synthesis., The current model for B-family DNA polymerases in archaea is one of single-subunit enzymes in contrast to the multi-subunit complexes in eukaryotes. Here the authors show that PolB1 from Sulfolobus solfataricus exists as a heterotrimeric complex in cell extracts.

Ribosomal RNAs (rRNAs) are extremely abundant, often constituting 80% to 90% of total RNA. Since rRNA sequences are often not of interest in genomic RNA sequencing experiments, rRNAs can be removed from the sample before the library preparation step, in order to prevent the majority of the library and the majority of sequencing reads from being rRNA. Removal of rRNA can be especially challenging for low quality and formalin-fixed paraffin-embedded (FFPE) RNA samples due to the fragmented nature of these RNA molecules. The NEBNext rRNA Depletion Kit (Human/Mouse/Rat) depletes both cytoplasmic (5 S rRNA, 5.8 S rRNA, 18 S rRNA, and 28 S rRNA) and mitochondrial rRNA (12 S rRNA and 16 S rRNA) from total RNA preparations from human, mouse, and rat samples. Due to the high similarity among mammalian rRNA sequences, it is likely that rRNA depletion can also be achieved for other mammals but has not been empirically tested. This product is compatible with both intact and degraded RNA (e.g., FFPE RNA). The resulting rRNA-depleted RNA is suitable for RNA-seq, random-primed cDNA synthesis, or other downstream RNA analysis applications. Regardless of the quality or amount of input RNA, this method efficiently removes rRNA, while retaining non-coding and other non-poly(A) RNAs. The NEBNext rRNA Depletion Kit thus provides a more complete picture of the transcript repertoire than oligo d(T) poly(A) mRNA enrichment methods. © 2016 by John Wiley & Sons, Inc. Keywords: NGS; RNA depletion; sequencing; formalin-fixed paraffin-embedded; FFPE; RNA; rRNA; ribosomal RNA; library preparation; transcriptome; rRNA removal

The hyperthermophilic Sulfolobus islandicus rod-shaped virus 2 (SIRV2) encodes a 25-kDa protein (SIRV2gp19) annotated as a hypothetical protein with sequence homology to the RecB nuclease superfamily. Even though SIRV2gp19 homologs are conserved throughout the rudivirus family and presumably play a role in the viral life cycle, SIRV2gp19 has not been functionally characterized. To define the minimal requirements for activity, SIRV2gp19 was purified and tested under varying conditions. SIRV2gp19 is a single-strand specific endonuclease that requires Mg2+ for activity and is inactive on double-stranded DNA. A conserved aspartic acid in RecB nuclease superfamily Motif II (D89) is also essential for SIRV2gp19 activity and mutation to alanine (D89A) abolishes activity. Therefore, the SIRV2gp19 cleavage mechanism is similar to previously described RecB nucleases. Finally, SIRV2gp19 single-stranded DNA endonuclease activity could play a role in host chromosome degradation during SIRV2 lytic infection. Electronic supplementary material The online version of this article (doi:10.1007/s00792-011-0385-0) contains supplementary material, which is available to authorized users.

Accurate duplication of parental DNA is a fundamental biological process, conserved in function across all life forms. All organisms depend on DNA polymerases for genome replication and maintenance. DNA polymerases also play central roles in modern molecular biology and biotechnology, enabling techniques including DNA cloning, the polymerase chain reaction (PCR), DNA sequencing, single nucleotide polymorphism (SNP) detection, whole genome amplification (WGA), synthetic biology, and molecular diagnostics. Each of these applications relies on the ability of polymerases to duplicate DNA, yielding a product that accurately represents the initial input. This book on “DNA Polymerases in Biotechnology” focuses on how detailed understanding of DNA polymerase structure and function informs protein engineering efforts, leading to development of novel reagents for molecular biology and clinical diagnostics. DNA polymerases are classified into several families (A, B, C, D, X, Y) and reverse transcriptase (RT) based on primary amino acid sequence similarities (Burgers et al., 2001). The book leads off with several reviews that describe how these DNA polymerase families are evolutionarily (Makarova et al., 2014) and structurally (Doublie and Zahn, 2014) related as well as how polymerases have been utilized in biotechnology (Ishino and Ishino, 2014). Subsequent research articles build on this basic knowledge to describe how DNA polymerases are engineered as tools in biotechnology. The best known and one of the earliest DNA polymerase-based biotechnology applications is PCR. Since its development over 30 years ago, PCR has been a foundational tool for amplifying and detecting specific alleles (Erlich et al., 1991). Advances in DNA polymerase fidelity, speed, and processivity continue to improve PCR workflows for genetic analysis, cloning, and diagnostics. Several articles in the issue highlight engineered polymerases with improved properties for PCR. Elshawadfy and co-workers demonstrate that combining desirable protein domains from several DNA polymerases into a single engineered chimeric enzyme can increase both speed and processivity during PCR (Elshawadfy et al., 2014). Similarly, Yamagami et al. create novel DNA polymerases by swapping domains from DNA polymerases found in hot springs to select for hybrid polymerases with desirable PCR properties (Yamagami et al., 2014). Castillo-Lizardo and colleagues analyze replication slippage during PCR of repeat sequences and show that the processivity clamp of DNA polymerase, proliferating cell nuclear antigen (PCNA) (Indiani and O'Donnell, 2006), reduces slippage to permit error-free replication of repeat sequences (Castillo-Lizardo et al., 2014). As nucleic acid analysis by PCR moves toward clinical diagnostics, there is a need for both faster DNA polymerases and those that are capable of directly amplifying DNA from clinical samples such as tissue, blood, body fluids, or stool to speed and simplify diagnostic workflows. Several papers characterize DNA polymerases that tolerate PCR inhibitors and allow rapid DNA amplification from clinical samples without DNA purification, thereby reducing analysis time, cost, and potential for contamination. The contribution by Killelea et al. demonstrates that a Family D polymerase from Pyrococcus abysii is tolerant to high concentrations of PCR inhibitors while Arezi and colleagues describe a method to select for DNA polymerase variants that enable direct PCR from whole blood (Arezi et al., 2014; Killelea et al., 2014). In addition to PCR, DNA polymerases play key roles in DNA sequencing technologies. Sanger DNA sequencing was used to sequence the first draft of the human genome in 2001 (Lander et al., 2001; Venter et al., 2001) and remains a standard and widespread method to determine DNA sequence. Several reviews describe the recent progress in the use of DNA polymerases for DNA sequencing. The review by Zhu examines the pivotal role of T7 DNA polymerase and its engineered derivatives in accelerating Sanger sequencing techniques (Zhu, 2014). Reha-Krantz et al. combine genetic and biochemical methods to identify T4 DNA polymerase mutants with increased processivity that along with T4 single stranded DNA binding protein (gp32) and T4 processivity factors (gp45 and gp44/62 complex) (Indiani and O'Donnell, 2006) improve Sanger sequencing of difficult DNA regions (Reha-Krantz et al., 2014). In the years since the human genome was first sequenced, new next generation sequencing methods have dramatically increased sequencing output while lowering costs (Mardis, 2011). Again, engineered DNA polymerases form the core of these next generation DNA sequencing-by-synthesis technologies. Chen reviews how DNA polymerases enable sequencing-by-synthesis technologies including the Illumina, Ion Torrent, and Pacific Biosciences platforms (Chen, 2014). The contribution by Laos et al. details how DNA polymerases have been engineered to incorporate the modified nucleotides used in DNA sequencing, genotyping, and synthesis of artificial DNA (Laos et al., 2014). Recently, point of care diagnostic tests that are cheap, reliable and do not depend on specialized instruments have emerged. For example, isothermal amplification techniques such as Loop-Mediated Amplification (LAMP) have been routinely used as diagnostic tests to detect infectious disease (Njiru, 2012). Chander and co-worker describe an engineered thermostable viral polymerase with RT and DNA polymerase activities that can be used in isothermal RT-LAMP detection of RNA (Chander et al., 2014). Additionally, they demonstrate that the reaction components can be lyophilized as a dry pellet to allow storage without refrigeration and may be used in the field as a simple diagnostic test for RNA viruses.

Recent developments of unique nucleotide probes have expanded our understanding of DNA polymerase function, providing many benefits to techniques involving next-generation sequencing (NGS) technologies. The cyclic reversible termination (CRT) methoddependsonefficientbase-selectiveincorporation of reversible terminators by DNA polymerases. Most terminators are designed with 3 0 -O-blocking groups but are incorporated with low efficiency and fidelity. We have developed a novel class of 3 0 -OH unblocked nucleotides, called Lightning Terminators TM , which have a terminating 2-nitrobenzyl moiety attached to hydroxymethylated nucleobases. A key structural feature of this photocleavable group displays a ‘molecular tuning’ effect with respect to single-base termination and improved nucleotide fidelity. Using Therminator TM DNA polymerase, we demonstrate that these 3 0 -OH unblocked terminators exhibit superior enzymatic performance compared to two other reversible terminators, 3 0 -O-amino-TTP and 3 0 -O-azidomethyl-TTP. Lightning Terminators TM show maximum incorporation rates (kpol )t hat range from 35 to 45nt/s, comparable to the fastest NGS chemistries, yet with catalytic efficiencies (kpol/KD) comparable to natural nucleotides. Pre-steady-state kinetic studies of thymidine analogs revealed that the major determinant for improvednucleotide selectivity is a significant reduction in kpol by >1000-fold over TTP misincorporation. These studies highlight the importance of structure–function relationships of modified nucleotides in dictating polymerase performance.

The hyperthermophilic archaeon Thermococcus litoralis strain NS-C, first isolated in 1985, has been a foundational organism for archaeal research in biocatalysis, DNA replication, metabolism, and the discovery of inteins. Here, we present the genome sequence of T. litoralis with a focus on the replication machinery and inteins.

Beginning in the 1980s, automation of DNA sequencing has greatly increased throughput, reduced costs, and enabled large projects to be completed more easily. The development of automation technology paralleled the development of other aspects of DNA sequencing: better enzymes and chemistry, separation and imaging technology, sequencing protocols, robotics, and computational advancements (including base-calling algorithms with quality scores, database developments, and sequence analysis programs). Despite the emergence of high-throughput sequencing platforms, automated Sanger sequencing technology remains useful for many applications. This unit provides background and a description of the "First-Generation" automated DNA sequencing technology. It also includes protocols for using the current Applied Biosystems (ABI) automated DNA sequencing machines.

The process of DNA sequencing has made tremendous strides in throughput, improved accuracy, ease of production, and lowered cost. As the practice of DNA sequencing has improved, so has the downstream data analysis with sophisticated databases and bioinformatics tools. Together, these advances have enlarged the number of applications upon which DNA sequencing can be brought to bear. This introductory unit provides a description of DNA sequencing with a focus on current and “NextGen” (second and third generation) automated technologies and applications. Curr. Protoc. Mol. Biol. 96:7.0.1-7.0.18. © 2011 by John Wiley & Sons, Inc. Keywords: NextGen DNA sequencing; high-throughput sequencing; epigenomics; transcriptome; ChIP Seq; CNV; copy number variation

Efficient and cost-effective DNA sequencing technologies are critical to the progress of molecular biology. This overview of DNA sequencing strategies provides a high-level review of seven distinct approaches to DNA sequencing: (a) dideoxy sequencing; (b) solid phase sequencing; (c) sequencing-by-hybridization; (d) mass spectrometry; (e) cyclic array sequencing; (f) microelectrophoresis; and (g) nanopore sequencing. Other platforms currently in development are also briefly described. The primary focus here is on Sanger dideoxy sequencing, which has been the dominant technology since 1977, and on cyclic array strategies, for which several competitive implementations have been developed since 2005. Because the field of DNA sequencing is changing rapidly, this unit represents a snapshot as of September, 2011.

Detailed biochemical characterization of nucleic acid enzymes is fundamental to understanding nucleic acid metabolism, genome replication and repair. We report the development of a rapid, high-throughput fluorescence capillary gel electrophoresis method as an alternative to traditional polyacrylamide gel electrophoresis to characterize nucleic acid metabolic enzymes. The principles of assay design described here can be applied to nearly any enzyme system that acts on a fluorescently labeled oligonucleotide substrate. Herein, we describe several assays using this core capillary gel electrophoresis methodology to accelerate study of nucleic acid enzymes. First, assays were designed to examine DNA polymerase activities including nucleotide incorporation kinetics, strand displacement synthesis and 3′-5′ exonuclease activity. Next, DNA repair activities of DNA ligase, flap endonuclease and RNase H2 were monitored. In addition, a multicolor assay that uses four different fluorescently labeled substrates in a single reaction was implemented to characterize GAN nuclease specificity. Finally, a dual-color fluorescence assay to monitor coupled enzyme reactions during Okazaki fragment maturation is described. These assays serve as a template to guide further technical development for enzyme characterization or nucleoside and non-nucleoside inhibitor screening in a high-throughput manner.

Comparative kinetic and structural analyses of a variety of polymerases have revealed both common and divergent elements of nucleotide discrimination. Although the parameters for dNTP incorporation by the hyperthermophilic archaeal Family B Vent DNA polymerase are similar to those previously derived for Family A and B DNA polymerases, parameters for analog incorporation reveal alternative strategies for discrimination by this enzyme. Discrimination against ribonucleotides was characterized by a decrease in the affinity of NTP binding and a lower rate of phosphoryl transfer, whereas discrimination against ddNTPs was almost exclusively due to a slower rate of phosphodiester bond formation. Unlike Family A DNA polymerases, incorporation of 9-[(2-hydroxyethoxy)methyl]X triphosphates (where X is adenine, cytosine, guanine, or thymine; acyNTPs) by Vent DNA polymerase was enhanced over ddNTPs via a 50-fold increase in phosphoryl transfer rate. Furthermore, a mutant with increased propensity for nucleotide analog incorporation (Vent(A488L) DNA polymerase) had unaltered dNTP incorporation while displaying enhanced nucleotide analog binding affinity and rates of phosphoryl transfer. Based on kinetic data and available structural information from other DNA polymerases, we propose active site models for dNTP, ddNTP, and acyNTP selection by hyperthermophilic archaeal DNA polymerases to rationalize structural and functional differences between polymerases.

The nucleotide-binding site in a variety of DNA polymerases was probed by analyzing incorporation of dideoxy and acyclic chain terminators. Family B archaeon DNA polymerases Vent, Deep Vent, 9 degrees N and Pfu incorporated acyclic in preference to dideoxy terminators, while the Family A DNA polymerases Taq and Klenow preferred dideoxy terminators. These divergent biases suggest that significant differences exist in sugar recognition in these two classes of polymerases. Mutants of Vent (A488L) and Taq (F667Y) that increase incorporation of dideoxy terminators maintained the acyclic/dideoxy bias of the parent enzyme, while more efficiently incorporating both dideoxy and acyclic terminators. The preference of archaeon DNA polymerases for acyclic analogs was exploited in chain terminator DNA sequence and genotype analysis. This technology was additionally aided by identification of specific dye-modified bases that improve terminator incorporation over that of the unmodified terminator. These three enhancing effects, (i) acyclic analogs, (ii) archaeon variants and (iii) specific dyes, appear to act additively and independently to increase terminator incorporation efficiency, collectively enhancing incorporation approximately 8000-fold over the wild-type incorporation of dideoxynucleotides. Fluorescent chain terminator DNA sequence traces demonstrate the applicability of these advances in improving terminator incorporation, as required in DNA sequence and genotype determinations.

Vent DNA polymerase normally discriminates strongly against incorporation of ribonucleotides, 3'-deoxyribonucleotides (such as cordycepin) and 2',3'-dideoxyribonucleotides. To explore the basis for this discrimination we have generated a family of variants with point mutations of residues in conserved Regions II and III and assayed incorporation of nucleo-tides with modified sugars by these variants, all of which were created in an exonuclease-deficient form of the enzyme. A Y412V variant incorporates ribonucleotides at least 200-fold more efficiently than the wild-type enzyme, consistent with Y412 acting as a 'steric gate' to specifically exclude ribonucleotides. The most striking variants tested involved changes to A488, a residue predicted to be facing away from the nucleotide binding site. The pattern of relaxed specificity at this position roughly correlates with the size of the substituted amino acid sidechain and affects a variety of modified nucleotide sugars.