Search

In this study, we experimentally evaluate the ion transportation through a cone guide target, which accelerates ions up to MeV energies via target normal sheath acceleration, and transports them onto the position of imploding fuel in the fast ignition scenario of nuclear fusion. We measured the electric and magnetic fields (EM-fields) induced by return current streaming along the cone wall by proton radiography, and we report that the EM-fields are predominantly induced within a temporal window up to 30 ps after the laser injection. The magnitude of the electric field is maximized around 13 ps, reaching $4.0\times 10^{10} \mathrm {V}\ \mathrm {m}^{-1}$ , when the magnetic field is below 200 T. The present scheme provides insights on the EM-fields evaluation in the time region that is difficult to treat with simulations due to the computing resources.

Nuclear reactions between protons and boron-11 nuclei (p–B fusion) that were used to yield energetic α-particles were initiated in a plasma that was generated by the interaction between a PW-class laser operating at relativistic intensities (~3 × 1019 W/cm2) and a 0.2-mm thick boron nitride (BN) target. A high p–B fusion reaction rate and hence, a large α-particle flux was generated and measured, thanks to a proton stream accelerated at the target’s front surface. This was the first proof of principle experiment to demonstrate the efficient generation of α-particles (~1010/sr) through p–B fusion reactions using a PW-class laser in the “in-target” geometry.

無衝突 Weibel 衝撃波生成に伴うフィラメントの空間・時間発展の XFEL による計測を模擬し、高強度レーザーを Si 製ロッド集合体に照射して生成されるロッド状プラズマの時間発展を、XFEL:SACLA を用いた X 線小角散乱(SAXS)計測によって調べた。また、加速されたイオンをターゲットホルダーに設置した固体飛跡検出器(CR-39 とカプトン)を用いて計測した。実験では、高強度レーザーを照射しない状態にターゲットノーマルに垂直方向から XFEL を入射して SAXS 計測を行い、次いで、ロッド集合体ターゲットにターゲットノーマルから 17 度の入射角で高強度レーザーを照射してプラズマを生成させて SAXS計測を行なった。, 第38回 プラズマ・核融合学会 年会

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 1018 W/cm2, respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.

A dosimetric calibration of three types of radiochromic films (GafChromicTM HD-V2, MD-V3, and EBT3) was carried out for absorbed doses (D) ranging up to 100 kGy using a 130 TBq Co60 γ-ray source. The optical densities (ODs) of the irradiated films were acquired with the transmission-mode flatbed film scanner EPSON GT-X980. The calibration data were cross-checked using the 20-MeV proton beam from the azimuthally varying field cyclotron at the Research Center for Nuclear Physics in Osaka University. These experimental results not only present the measurable dose ranges of the films depending on the readout wavelength, but also show consistency with our hypothesis that the OD response curve [log(OD)–log(D) curve] is determined by the volumetric average of the absorption dose and does not strongly depend on the type of radiation for the excitation.

Atomically thin graphene is a transparent, highly electrically and thermally conductive, light-weight, and the strongest material. To date, graphene has found applications in many aspects including transport, medicine, electronics, energy, defense, and desalination. We demonstrate another disruptive application of graphene in the field of laser-ion acceleration, in which the unique features of graphene play indispensable role. Laser driven ion sources have been widely investigated for pure science, plasma diagnostics, medical and engineering applications. Recent developments of laser technologies allow us to access radiation regime of laser ion acceleration with relatively thin targets. However, the thinner target is the less durable and can be easily broken by the pedestal or prepulse through impact and heating prior to the main laser arrival. One of the solutions to avoid this is plasma mirror, which is a surface plasma created by the foot of the laser pulse on an optically transparent material working as an effective mirror only for the main laser peak. So far diamond like carbon (DLC) is used to explore the ion acceleration in extremely thin target regime (< 10 nm) with plasma mirrors, and it is necessary to use plasma mirrors even in moderately thin target regime (10-100 nm) to realize energetic ion generation. However, firstly DLC is not 2D material, and therefore, it is very expensive to make it thin and flat. Moreover, graphene is stronger than diamond at extremely thin regime, and much more reasonable for mass-production. Furthermore, installing and operating plasma mirrors at high repetition rate is also costly. Here we show another direct solution using graphene as the thinnest and strongest target ever made. We develop a facile transfer method to fabricate large-area suspended graphene (LSG) as target for laser ion acceleration with precision down to a single atomic layer. Direct irradiation of the LSG targets with an ultra intense laser generates energetic carbons and protons evidently showing the durability of graphene without plasma mirror. This extends the new frontier of science on graphene under extreme electromagnetic field, such as energy frontier and nuclear fusion.

Intense laser-plasma interactions are an essential tool for the laboratory study of ion acceleration at a collisionless shock. With two-dimensional particle-in-cell calculations of a multicomponent plasma we observe two electrostatic collisionless shocks at two distinct longitudinal positions when driven with a linearly polarized laser at normalized laser vector potential ${a}_{0}$ that exceeds 10. Moreover, these shocks, associated with protons and carbon ions, show a power-law dependence on ${a}_{0}$ and accelerate ions to different velocities in an expanding upstream with higher flux than in a single-component hydrogen or carbon plasma. This results from an electrostatic ion two-stream instability caused by differences in the charge-to-mass ratio of different ions. Particle acceleration in collisionless shocks in multicomponent plasma are ubiquitous in space and astrophysics, and these calculations identify the possibility for studying these complex processes in the laboratory.

Electrostatic two-stream instabilities play essential roles in an electrostatic collisionless shock formation. They are a key dissipation mechanism and result in ion heating and acceleration. Since the number and energy of the shock-accelerated ions depend on the instabilities, precise identification of the active instabilities is important. Two-dimensional particle-in-cell simulations in a multicomponent plasma reveal ion reflection and acceleration at the shock front, excitation of a longitudinally propagating electrostatic instability due to a nonoscillating component of the electrostatic field in the upstream region of the shock, and generation of up- and down-shifted velocity components within the expanding-ion components. A linear analysis of the instabilities for a ${\mathrm{C}}_{2}{\mathrm{H}}_{3}\mathrm{Cl}$ plasma using the one-dimensional electrostatic plasma dispersion function, which includes electron and ion temperature effects, shows that the most unstable mode is the electrostatic ion-beam two-stream instability (IBTI), which is weakly dependent on the existence of electrons. The IBTI is excited by velocity differences between the expanding protons and carbon-ion populations. There is an electrostatic electron-ion two-stream instability with a much smaller growth rate associated with a population of protons reflecting at the shock. The excitation of the fast-growing IBTI associated with laser-driven collisionless shock increases the brightness of a quasimonoenergetic ion beam.

In an experiment performed with a high-intensity and high-energy laser system, $\ensuremath{\alpha}$-particle production in proton-boron reaction by using a laser-driven proton beam was measured. $\ensuremath{\alpha}$ particles were observed from the front and also from the rear side, even after a 2-mm-thick boron target. The data obtained in this experiment have been analyzed using a sequence of numerical simulations. The simulations clarify the mechanisms of $\ensuremath{\alpha}$-particle production and transport through the boron targets. $\ensuremath{\alpha}$-particle energies observed in the experiment and in the simulation reach 10--20 MeV through energy transfer from 20--30 MeV energy incident protons. Despite the lower cross sections for protons with energy above the sub-MeV resonances in the proton-boron reactions, ${10}^{8}$--${10}^{9}\phantom{\rule{4pt}{0ex}}\ensuremath{\alpha}$ particles per steradian have been detected.

We present preliminary results on generation of energetic α-particles driven by lasers. The experiment was performed at the Institute of Laser Engineering in Osaka using the short-pulse, high-intensity, high-energy, PW-class laser. The laser pulse was focused onto a thin plastic foil (pitcher) to generate a proton beam by the well-known TNSA mechanism which, in turn, was impinging onto a boron-nitride (BN) target (catcher) to generated alpha-particles as a result of proton-boron nuclear fusion events. Our results demonstrate generation of α-particles with energies in the range 8–10 MeV and with a flux around 5 × 10^9 sr^−1.

Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in inertial confinement fusion (ICF) ignition sparks. Laser-produced relativistic electron beam (REB) deposits a part of kinetic energy in the core, and then the heated region becomes the hot spark to trigger the ignition. However, due to the inherent large angular spread of the produced REB, only a small portion of the REB collides with the core. Here, we demonstrate a factor-of-two enhancement of laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a magnetic field of hundreds of Tesla that is applied to the transport region from the REB generation zone to the core which results in guiding the REB along the magnetic field lines to the core. This scheme may provide more efficient energy coupling compared to the conventional ICF scheme., It is desirable to deposit more energy in the dense plasma core to trigger the fusion ignition. Here the authors demonstrate enhanced energy coupling from laser to plasma core by using solid targets and guiding the transport of relativistic electron beam with external magnetic field.

Proton generation, transport and interaction with hollow cone targets are investigated by means of two-dimensional PIC simulations. A scaled-down hollow cone with gold walls, a carbon tip and a curved hydrogen foil inside the cone has been considered. Proton acceleration is driven by a 1020 W·cm−2 and 1 ps laser pulse focused on the hydrogen foil. Simulations show an important surface current at the cone walls which generates a magnetic field. This magnetic field is dragged by the quasi-neutral plasma formed by fast protons and co-moving electrons when they propagate towards the cone tip. As a result, a tens of kT Bz field is set up at the cone tip, which is strong enough to deflect the protons and increase the beam divergence substantially. We propose using heavy materials at the cone tip and increasing the laser intensity in order to mitigate magnetic field generation and proton beam divergence.

We present the general challenges of plasma diagnostics for laser-produced plasmas and give a few more detailed examples: spherically bent crystals for X-ray imaging, velocity interferometers (VISAR) for shock studies, and proton radiography.

Magnetic reconnection in a relativistic electron magnetization regime was observed in a laboratory plasma produced by a high-intensity, large energy, picoseconds laser pulse. Magnetic reconnection conditions realized with a laser-driven several kilotesla magnetic field is comparable to that in the accretion disk corona of black hole systems, i.e., Cygnus X-1. We observed particle energy distributions of reconnection outflow jets, which possess a power-law component in a high-energy range. The hardness of the observed spectra could explain the hard-state x-ray emission from accreting black hole systems.

New short-pulse kilojoule, Petawatt-class lasers, which have recently come online and are coupled to large-scale, many-beam long-pulse facilities, undoubtedly serve as very exciting tools to capture transformational science opportunities in high energy density physics. These short-pulse lasers also happen to reside in a unique laser regime: very high-energy (kilojoule), relatively long (multi-picosecond) pulse-lengths, and large (10s of micron) focal spots, where their use in driving energetic particle beams is largely unexplored. Proton acceleration via Target Normal Sheath Acceleration (TNSA) using the Advanced Radiographic Capability (ARC) short-pulse laser at the National Ignition Facility in the Lawrence Livermore National Laboratory is demonstrated for the first time, and protons of up to 18 MeV are measured using laser irradiation of >1 ps pulse-lengths and quasi-relativistic (∼1018 W/cm2) intensities. This is indicative of a super-ponderomotive electron acceleration mechanism that sustains acceleration over long (multi-picosecond) time-scales and allows for proton energies to be achieved far beyond what the well-established scalings of proton acceleration via TNSA would predict at these modest intensities. Furthermore, the characteristics of the ARC laser (large ∼100 μm diameter focal spot, flat spatial profile, multi-picosecond, relatively low prepulse) provide acceleration conditions that allow for the investigation of 1D-like particle acceleration. A high flux ∼ 50 J of laser-accelerated protons is experimentally demonstrated. A new capability in multi-picosecond particle-in-cell simulation is applied to model the data, corroborating the high proton energies and elucidating the physics of multi-picosecond particle acceleration.

Ion acceleration in electrostatic collisionless shocks is driven by the interaction of the high-power laser with specially tailored near-relativistic critical density plasma. 2D EPOCH particle-in-cell simulations show that the ion acceleration is dependent on the target material used. In materials with low charge-to-mass ratio.

The paper presents the general challenges of diagnostics for laser-produced plasmas related to their small dimensions and short duration but also to the presence of very strong temperature and density gradient in the plasma. In particular, we focus on more detailed examples related to optical diagnostics for the undercritical region of the plasma: shadowgraphy, schlieren, interferometry, polarimetry.

The double laser pulse approach to relativistic electron beam (REB) collimation in solid targets has been investigated at the LULI-ELFIE facility. In this scheme two collinear laser pulses are focused onto a solid target with a given intensity ratio and time delay to generate REBs. The magnetic field generated by the first laser-driven REB is used to guide the REB generated by a second delayed laser pulse. We show how electron beam collimation can be controlled by properly adjusting the ratio of focus size and the delay time between the two pulses. We found that the maximum of electron beam collimation is clearly dependent on the laser focal spot size ratio and related to the magnetic field dynamics. Cu-Kα and CTR imaging diagnostics were implemented to evaluate the collimation effects on the respectively low energy (≤100 keV) and high energy (≥MeV) components of the REB.

Fast isochoric laser heating is a scheme to heat a matter with relativistic-intensity ($>$ 10$^{18}$ W/cm$^2$) laser pulse or X-ray free electron laser pulse. The fast isochoric laser heating has been studied for creating efficiently ultra-high-energy-density (UHED) state. We demonstrate an fast isochoric heating of an imploded dense plasma using a multi-picosecond kJ-class petawatt laser with an assistance of externally applied kilo-tesla magnetic fields for guiding fast electrons to the dense plasma.The UHED state with 2.2 Peta-Pascal is achieved experimentally with 4.6 kJ of total laser energy that is one order of magnitude lower than the energy used in the conventional implosion scheme. A two-dimensional particle-in-cell simulation reveals that diffusive heating from a laser-plasma interaction zone to the dense plasma plays an essential role to the efficient creation of the UHED state., 8 pages, 4 figures, 1 table

Intense lasers interacting with dense targets accelerate relativistic electron beams, which transport part of the laser energy into the target depth. However, the overall laser-to-target energy coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser–plasma interaction. Here we demonstrate that an efficient guiding of MeV electrons with about 30 MA current in solid matter is obtained by imposing a laser-driven longitudinal magnetostatic field of 600 T. In the magnetized conditions the transported energy density and the peak background electron temperature at the 60-μm-thick target's rear surface rise by about a factor of five, as unfolded from benchmarked simulations. Such an improvement of energy-density flux through dense matter paves the ground for advances in laser-driven intense sources of energetic particles and radiation, driving matter to extreme temperatures, reaching states relevant for planetary or stellar science as yet inaccessible at the laboratory scale and achieving high-gain laser-driven thermonuclear fusion., Efficient energy transport by laser-driven relativistic electron beams is crucial in many applications including inertial confinement fusion, and particle acceleration. Here the authors demonstrate relativistic electron beam guiding in dense plasma with an externally imposed high magnetic field.

A laser-driven accelerator generates protons with tens of MeV in energy by a compact, strong, and transient accelerating electric field produced as a result of laser–plasma interactions at relativistic intensities. In previous studies, two- and three-dimensional particle-in-cell simulations revealed that the application of a kT-level axial magnetic field results in an enhancement of proton acceleration via the target normal sheath acceleration mechanism due to reduced lateral electron divergence and improved electron heating efficiency. An experimental investigation of this scheme on the GEKKO-XII and the LFEX facilities found that the number and maximum energy of the accelerated protons decreased with increasing the temporal delay between the pulse driving the external magnetic-field and the pulse accelerating the protons, contrary to the theoretical and numerical expectations. We identify sources responsible for the degradation of the proton beam performance and we propose an alternative experimental setup to mitigate the degradation in future experiments.

The nuclear burn history provides critical information about the dynamics of the hot-spot formation and high-density fuel-shell assembly of an Inertial Confinement Fusion (ICF) implosion, as well as information on the impact of alpha heating, and a multitude of implosion failure mechanisms. Having this information is critical for assessing the energy-confinement time τE and performance of an implosion. As the confinement time of an ICF implosion is a few tens of picoseconds, less than 10-ps time resolution is required for an accurate measurement of the nuclear burn history. In this study, we propose a novel 1-ps time-resolution detection scheme based on the Pockels effect. In particular, a conceptual design for the experiment on the National Ignition Facility and OMEGA are elaborated upon herein. A small organic Pockels crystal "DAST" is designed to be positioned ∼5 mm from the ICF implosion, which is scanned by a chirped pulse generated by a femto-second laser transmitted through a polarization-maintained optical fiber. The originally linearly polarized laser is changed to an elliptically polarized laser by the Pockels crystal when exposed to neutrons, and the modulation of the polarization will be analyzed. Our study using 35-MeV electrons showed that the system impulse response is 0.6 ps. The response time is orders of magnitude shorter than current systems. Through measurements of the nuclear burn history with unprecedented time resolution, this system will help for a better understanding of the dynamics of the hot-spot formation, high-density fuel-shell assembly, and the physics of thermonuclear burn wave propagation.

A large-aperture high-sensitivity image intensifier panel that consists of an avalanche photodiode array and a light-emitting diode array is presented. The device has 40% quantum efficiency, over 104 optical gain, and 80-ns time resolution. The aperture size of the device is 20 cm, and with the current manufacturing process, it can be scaled to arbitrarily larger sizes. The device can intensify the light from a single particle scintillation emission to an eye-visible bright flash. The image resolution of the device is currently limited by the size of the avalanche photodiode that is 2 mm, although it can be scaled to smaller sizes in the near future. The image intensifier is operated at a small voltage, typically +57 V. The device can be applied to various applications, such as scintillation imaging, night vision cameras, and an image converter from non-visible light (such as infrared or ultraviolet) to visible light.

Increasing the laser energy absorption into energetic particle beams represents a longstanding quest in intense laser-plasma physics. During the interaction with matter, part of the laser energy is converted into relativistic electron beams, which are the origin of secondary sources of energetic ions, γ-rays and neutrons. Here we experimentally demonstrate that using multiple coherent laser beamlets spatially and temporally overlapped, thus producing an interference pattern in the laser focus, significantly improves the laser energy conversion efficiency into hot electrons, compared to one beam with the same energy and nominal intensity as the four beamlets combined. Two-dimensional particle-in-cell simulations support the experimental results, suggesting that beamlet interference pattern induces a periodical shaping of the critical density, ultimately playing a key-role in enhancing the laser-to-electron energy conversion efficiency. This method is rather insensitive to laser pulse contrast and duration, making this approach robust and suitable to many existing facilities., Enhanced coupling of laser energy to the target particles is a fundamental issue in laser-plasma interactions. Here the authors demonstrate increased photon absorption leading into higher laser to electron and proton energy transfer through the interference of multiple coherent beamlets.

A relativistic laser pulse, confined in a cylindrical-like target, under specific conditions may perform multiple scattering along the internal target surface. This results in the confinement of the laser light, leading to a very efficient interaction. The demonstrated propagation of the laser pulse along the curved surface is just yet another example of the “whispering gallery” effect, although nonideal due to laser–plasma coupling. In the relativistic domain its important feature is a gradual intensity decrease, leading to changes in the interaction conditions. The process may pronounce itself in plenty of physical phenomena, including very efficient electron acceleration and generation of relativistic magnetized plasma structures.

Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is the laser irradiance $I_{\mathrm{las}}\lambda_{\mathrm{las}}^2$. The space-time evolution of the B-fields is experimentally characterized by high-frequency bandwidth B-dot probes and by proton-deflectometry measurements. The magnetic pulses, of ns-scale, are long enough to magnetize secondary targets through resistive diffusion. We applied it in experiments of laser-generated relativistic electron transport into solid dielectric targets, yielding an unprecedented 5-fold enhancement of the energy-density flux at $60 \,\mathrm{\mu m}$ depth, compared to unmagnetized transport conditions. These studies pave the ground for magnetized high-energy density physics investigations, related to laser-generated secondary sources of radiation and/or high-energy particles and their transport, to high-gain fusion energy schemes and to laboratory astrophysics., Comment: 11 pages, 7 figures, invited APS

International audience; We experimentally investigate the fast ($\atop\sim}$10 ps into a $\approx$ 140 Mbar blast wave, according to hydrodynamic simulations, consistent with our measurements. These experimental and numerical findings pave the way to a short-pulse-laser-based platform dedicated to high-energy-density physics studies.

Collimated transport of ultrahigh intensity electron current was observed in cold and in laser-shocked vitreous carbon, in agreement with simulation predictions. The fast electron beams were created by coupling high-intensity and high-contrast laser pulses onto copper-coated cones drilled into the carbon samples. The guiding mechanism---observed only for times before the shock breakout at the inner cone tip---is due to self-generated resistive magnetic fields of $\ensuremath{\sim}0.5--1\text{ }\text{ }\mathrm{kT}$ arising from the intense currents of fast electrons in vitreous carbon, by virtue of its specific high resistivity over the range of explored background temperatures. The spatial distribution of the electron beams, injected through the samples at different stages of compression, was characterized by side-on imaging of hard x-ray fluorescence.

Understanding the dynamics of rapidly varying electromagnetic fields in intense short pulse laser plasma interactions is of key importance to understand the mechanisms at the basis of a wide variety of physical processes, from high energy density physics and fusion science to the development of ultrafast laser plasma devices to control laser-generated particle beams. Target normal sheath accelerated (TNSA) proton radiography represents an ideal tool to diagnose ultrafast electromagnetic phenomena, providing 2D spatially and temporally resolved radiographs with temporal resolution varying from 2-3 ps to few tens of ps. In this work we introduce the proton radiography technique and its application to diagnose the spatial and temporal evolution of electromagnetic fields in laser-driven capacitor coil targets.

Using one of the world most powerful laser facility, we demonstrate for the first time that high-contrast multi-picosecond pulses are advantageous for proton acceleration. By extending the pulse duration from 1.5 to 6 ps with fixed laser intensity of 1018 W cm−2, the maximum proton energy is improved more than twice (from 13 to 33 MeV). At the same time, laser-energy conversion efficiency into the MeV protons is enhanced with an order of magnitude, achieving 5% for protons above 6 MeV with the 6 ps pulse duration. The proton energies observed are discussed using a plasma expansion model newly developed that takes the electron temperature evolution beyond the ponderomotive energy in the over picoseconds interaction into account. The present results are quite encouraging for realizing ion-driven fast ignition and novel ion beamlines.

An experiment on ion acceleration in near-critical density plasma is conducted using a high-intensity 1053 nm linearly polarized laser pulse with a laser intensity of 3.5 × 1018W/cm2. In this experiment a thin 0.7 µm thick CH foil is irradiated with a low-intensity, nanosecond pulse to create a near-critical density plasma. Then the high-intensity pulse is focused on the target at different time delays in order to verify what density profile is optimal for collisionless shock generation. Ion acceleration and electron spectra are observed by Radio Chromic Film and magnetic electron spectrometer. Proton dominant acceleration is confirmed at some time delays by CR-39. It is suggested that the accelerated ions are produced by Collisionless Electrostatic Shock comparing the experimental results with numerical/computational results.

Fast-electron beam stopping mechanisms in media ranging from solid to warm dense matter have been investigated experimentally and numerically. Laser-driven fast electrons have been transported through solid Al targets and shock-compressed Al and plastic foam targets. Their propagation has been diagnosed via rear-side optical self-emission and Kα X-rays from tracer layers. Comparison between measurements and simulations shows that the transition from collision-dominated to resistive field-dominated energy loss occurs for a fast-electron current density ~5 × 1011 A cm−2. The respective increases in the stopping power with target density and resistivity have been detected in each regime. Self-guided propagation over 200μm has been observed in radially compressed targets due to ~1kT magnetic fields generated by resistivity gradients at the converging shock front.

Generation of high intensity and well collimated multi-energetic proton beams from laser–matter interaction extends the possibility to use protons as a diagnostic tool to image imploding target in Inertial Confinement Fusion (ICF) experiments. Due to the very large mass densities reached during implosion, protons traveling through the target undergo a very large number of collisions. Therefore the analysis of experimentally obtained proton images requires care and accurate numerical simulations using both hydrodynamic and Monte Carlo codes. The impact of multiple scattering needs to be carefully considered by taking into account the exact stopping power for dense matter and for the underdense plasma corona. In our paper, density, temperature and ionization degree profiles of the imploding target are obtained by 2D hydrodynamic simulations performed using CHIC code. Proton radiography images are simulated using the Monte Carlo code (MCNPX; adapted to correctly describe multiple scattering and plasma stopping power) in order to reconstruct the complete hydrodynamic history of the imploding target. Finally we develop a simple analytical model to study the performance of proton radiography as a function of initial experimental parameters, and identify two different regimes for proton radiography in ICF.

In the fast ignition approach to inertial confinement fusion (ICF), the ignition is expected to be triggered by an ultra-high intensity laser-produced fast electron beam, propagating and releasing its energy at the core of the shock-compressed deuterium–tritium (DT) capsule. Therefore the study of fast electron generation and transport is crucial for fast ignition science. As a consequence of fast electron transport, K-shell ionization of the medium atoms is produced with the subsequent emission of a K-alpha photon. The imaging of K-α sources is therefore very useful to obtain both quantitative and qualitative information on fast electron transport. Spherically bent crystals can provide 2-D spatially resolved and mono-energetic images of the K-α source and are widely used in several fast ignition oriented experiments.

The recent “fast ignition approach” to ICF relies on the presence of fast electrons to provide the “external” ignition spark triggering the nuclear fusion reaction in the compressed core of a thermonuclear target. Such fast electron beam is produced by the interaction of a short-pulse high-intensity laser with the target itself. In this context, it becomes essential to characterize the density of fast electrons and their average energy (i.e. the “laser to fast electron” energy conversion efficiency) but also the finer details of the velocity and angular distribution. In this work we will discuss several techniques used to determine the fast electron distribution function.

This paper reports an experimental investigation of a scheme to produce an intense, pulsed, point-like, and quasi-monoenergy neutron source. In this scheme, the inner wall of a deuterated plastic spherical cavity is mono-directionally irradiated by a 2.4 kJ laser beam through an open-tip gold cone inserted into the cavity. The whole inner wall of the cavity is illuminated by laser light owing to multiple laser reflections, and the laser-ablated plasma stagnates near the center of the cavity, at which a several keV hot spot is generated. Thermonuclear and beam D-D fusion reactions occur in the hot spot. We have demonstrated the neutron yield exceeding 107 neutrons per pulse from a

Obtaining keV ion temperatures at solid density, i.e. “warm dense matter”, in the laboratory would be of great interest to measure opacity and equations of state of matter under extremes conditions. Here we report a new means to effectively confine the energetic electrons and localize the energy deposition to a small, more uniformly heated, volume at the tip of nanofabricated micro-cone targets. This is achieved with very high contrast laser irradiation, which interacts with the cone wall to generate strong (~10 MG) localized resistive magnetic fields within the target bulk. Temperatures of up to ~200 eV are observed, with an input laser energy of 10 J. This new means has been investigated both experimentally and with Particle-In-Cell simulations.