Search

One of the current and widely used non-destructive testing methods for monitoring and determining the elastic properties of materials is nanoindentation. In this case, to interpret the test results, a non-trivial task arises of constructing an adequate mathematical model of the indentation process. As a rule, in many cases, analytical formulas are used that are obtained from an elastic linear formulation of problems about the introduction of a non-deformable stamp into a homogeneous elastic half-space. Currently, the numerical formulation of the problem makes it possible to obtain and use a numerical solution obtained taking into account the complete plastic nonlinear behavior of the material. In this work, a study of contact problems on the introduction of a spherical and conical indenter into an elastoplastic homogeneous half-space was carried out. To verify the numerical solution, the problem of introducing a spherical and conical indenter into an elastic homogeneous half-space was also solved and compared with known analytical solutions. Issues of convergence and tuning of numerical methods, the influence of plasticity and the applicability of analytical solutions are explored. Problems are solved numerically using the finite element method in the Ansys Mechanical software package.

The paper presents a study of the effectiveness of functionally graded materials in heavily loaded point elastohydrodynamically lubricated contacts with straight lubricant entrainment. As part of the study, some criteria of coating effectiveness are introduced and discussed. The approach used for achieving this goal is based on the recently developed asymptotic solution method for steady isothermal elastohydrodynamically lubricated problems of heavily loaded point contacts, as well as on a semi-analytical method for the solutions of contact problems for elastic functionally graded materials without the presence of lubrication in the contacts (dry contacts). For line elastohydrodynamically lubricated contacts such a problem has already been studied. The solution process can be subdivided into two stages: the solution of the contact problems for dry contacts and a solution of the problem for lubricated contacts. The solution of dry contact problems for functionally graded materials is described in detail in Part 1 of the paper. As in the case of homogeneous contact materials in the analysis of the elastohydrodynamically lubricated problem for functionally graded elastic materials, it is shown that the whole contact region can be subdivided into three subregions: the central one which is adjacent to the other two regions occupied by the ends of the zones. The central region can be subdivided into the Hertzian region and adjacent to it the inlet and exit zones which, in turn, are adjacent to the inlet and exit boundaries of the contact, respectively. In the Hertzian region the elastohydrodynamically lubricated problem solution is very close to the solution of the corresponding dry (i.e. non-lubricated) contact problem for functionally graded elastic materials which have been analyzed in Part 1 of the paper. In the central region in the inlet and exit zones of the heavily loaded point elastohydrodynamically lubricated contact, the elastohydrodynamically lubricated problem for functionally graded elastic materials using certain similarity transforms can be reduced to asymptotically valid equations identical to the ones obtained in the inlet and exit zones of the heavily loaded line elastohydrodynamically lubricated contacts for homogeneous elastic materials. Therefore, many of the well known properties of heavily loaded line elastohydrodynamically lubricated contacts for homogeneous elastic materials are also valid for heavily loaded point elastohydrodynamically lubricated contacts for functionally graded elastic materials. These asymptotically valid equations can be analyzed and numerically solved based on stable methods using a specific regularization approach which was developed for lubricated line contacts. Also, this asymptotic analysis leads to the easy analytical derivation of equations for the lubrication film thickness which take into account the inhomogeneity of the elastic materials. As a result of this analysis, criteria for an increase in lubrication film and friction force reduction are proposed. These criteria depend on lubricant properties, as well as the properties of functionally graded elastic materials involved in lubricated contacts. [ABSTRACT FROM AUTHOR]

Over the last couple decades coatings attract more and more attention in practical applications. The present study addresses a question which is not well studied: how coated surfaces behave in lubricated contacts? In other words, this is a study of the effectiveness of functionally graded materials in heavily loaded point elastohydrodynamically lubricated contacts with straight lubricant entrainment. As a part of the study, some criteria of coating effectiveness are introduced and discussed. More specifically, the behavior of main parameters such as the lubrication film thickness and the frictional force in point heavily loaded lubricated contacts of functionally graded elastic materials are considered. The problem is studied based on the method of matched asymptotic expansions which allows us to split the problem into two separate problems: a dry contact problems for functionally graded elastic materials and an elastohydrodynamically lubricated problem for functionally graded materials. The elastohydrodynamically lubricated problem uses as input data not only the operational and physical parameters of the materials and lubricant but also the asymptotic behavior of the dry contact problem solution near the contact boundaries.Therefore, a sequence of two problems must be solved: the dry contact problems for functionally graded elastic materials and the elastohydrodynamically lubricated problem for functionally graded materials. Similar methods have been used for the analysis of an elastohydrodynamically lubricated problem for heavily loaded line contacts of functionally graded materials. The dry contact problem will be analyzed in Part 1 of the paper based on a semi-analytical bilateral method which produces correct asymptotic solutions for thin and thick coatings. The analytical expressions for contact pressure are obtained and analyzed for various combinations of coating thicknesses and elastic properties.The elastohydrodynamically lubricated problem will be considered in Part 2 of the paper based on the method of matched asymptotic expansions. In the analysis of the elastohydrodynamically lubricated problem, as in the case of homogeneous contact materials, it is shown that the whole contact region can be subdivided into three subregions: the central one which is adjacent to the other two regions occupied by the ends of the zones. The central region can be subdivided into the Hertzian region and then adjacent to it inlet and exit zones which, in turn, are adjacent to the inlet and exit boundaries of the contact, respectively. In the Hertzian region the elastohydrodynamically lubricated problem solution is very close to the solution of the corresponding dry (i.e. non-lubricated) contact problem for functionally graded elastic materials which have been analyzed. In the central region in the inlet and exit zones of a heavily loaded point elastohydrodynamically lubricated contact, the elastohydrodynamically lubricated problem for functionally graded elastic materials using certain scaling transforms can be reduced to asymptotically valid equations identical to the ones obtained in the inlet and exit zones of heavily loaded line elastohydrodynamically lubricated contacts for homogeneous elastic materials. Therefore, many of the well known properties of heavily loaded line elastohydrodynamically lubricated contacts for homogeneous elastic materials are also valid for heavily loaded point elastohydrodynamically lubricated contacts for functionally graded elastic materials. These asymptotically valid equations can be analyzed and numerically solved based on stable methods using a specific regularization approach, which were developed for lubricated line contacts. Also, this asymptotic analysis leads to an easy analytical derivation of formulas for the lubrication film thickness which take into account the inhomogeneity of the elastic materials. As a result of this analysis, some criteria for lubrication film thickness increase and friction force reduction are proposed. These criteria depend on lubricant properties as well as the properties of functionally graded elastic materials involved in lubricated contacts.Such a sequential solution of the elastohydrodynamically lubricated problem for functionally graded materials makes it perfectly clear what the dependence is of elastohydrodynamically lubricated contact parameters on the solid material (including the coating) and lubricant properties. [ABSTRACT FROM AUTHOR]

In contacts of functionally graded elastic solids, the conditions produced are significantly different from the ones in similar contacts of homogeneous elastic materials. Especially it is true for heavily loaded lubricated contacts. The situation is even more diverse due to different dependences of the material elastic parameters on material depth. In the previous papers, the cases of lubricated contacts with coatings made of homogeneous materials are considered using asymptotic and semi-analytical methods. The goal of the paper is to determine the behavior of the coating effectiveness criteria in heavily loaded elastohydrodynamically lubricated (EHL) contacts for coatings with elastic modulus varying linearly and exponentially across the coating thickness as well as to compare the results with the case of coatings made of homogeneous materials. The above criteria include the criteria on the lubrication film thickness and friction force. The approach used for analyzing the influence of functionally graded elastic materials on parameters of heavily loaded line EHL contacts is based on the asymptotic methods earlier developed by the authors. The analysis is based on splitting the problem into two distinct parts: the problem for dry (nonlubricated) contacts and a problem for lubricated contacts. The bridge between the two problems is the asymptotic behavior of pressure in the vicinity of the end points of the contacts. More specifically, in the central part of the contact the solution of the EHL problem for functionally graded materials is close to the one for the dry contact of these materials while in the narrow zones near the inlet and exit points of the contact the lubrication effects become comparable to the effects due to the elasticity of the solids. This approach to the EHL problem solution reveals its structure. [ABSTRACT FROM AUTHOR]

Contacts of indentors with functionally graded elastic solids may produce pressures significantly different from the results obtained for homogeneous elastic materials (Hertzian results). It is even more sofor heavily loaded line elastohydrodynamically lubricated (EHL) contacts. The goal of the paper is to indicate two distinct ways the functionally graded elastic materials may alter the classic results for the heavily loaded line EHL contacts. Namely, besides pressure, the other two main characteristics which are influenced by the nonuniformity of the elastic properties of the contact materials are lubrication film thickness and frictional stresslfriction force produced by lubricant flow. The approach used for analyzing the influence of functionally graded elastic materials on parameters of heavily loaded line EHL contacts is based on the asymptotic methods developed earlier by the authors such as Kudish (2013, Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches, Chapman & HalllCRC Press, Boca Raton, FL), Kudish and Covitch (2010, Modeling and Analytical Methods in Tribology, Chapman & HalllCRC Press, Boca Raton, FL), Aizikovich et at. (2002, "Analytical Solution of the Spherical Indentation Problem for a Half-Space With Gradients With the Depth Elastic Properties," Int. J. Solids Struct., 39(10), pp. 2745-2772), Aizikovich et al. (2009, "Bilateral Asymptotic Solution of One Class of Dual Integral Equations of the Static Contact Problems for the Foundations Inhomogeneous in Depth," Operator Theory: Advances and Applications, Birkhauser Verlag, Basel, p. 317), Aizikovich and Vasiliev (2013, "A Bilateral Asymptotic Method of Solving the Integral Equation of the Contact Problem for the Torsion of an Elastic Halfspace Inhomogeneous in Depth," J. Appl. Math. Mech., 77(1), pp. 91-97), Volkov et al. (2013, "Analytical Solution of Axisymmetric Contact Problem About Indentation of a Circular Indenter Into a Soft Functionally Graded Elastic Layer," Acta Mech. Sin., 29(2), pp. 196-201), Vasiliev et al. (2014, "Axisymmetric Contact Problems of the Theory of Elasticity for Inhomogeneous Layers," Z. Angew. Math. Mech., 94(9), pp. 705-712), Aizikovich et al. (2008, "The Deformation of a Half-Space With a Gradient Elastic Coating Under Arbitrary Axisymmetric Loading," J. Appl. Math. Mech., 72(4), pp. 461-467), and Aizikovich et al. (2010, "Inverse Analysis for Evaluation of the Shear Modulus of Inhomogeneous Media in Torsion Experiments," Int. J. Eng. Sci., 48(10), pp. 936-942). More specifically, it is based on the analysis of contact problems for dry contacts of functionally graded elastic solids and the lubrication mechanisms in the inlet and exit zones as well as in the central region of heavily loaded lubricated contacts. The way the solution of the EHL problem for coated!functionally graded materials is obtained provides a very clear structure of the solution. The solution of the EHL problem in the Hertzian region is very close to the solution of the dry contact problem while in the inlet and exit zones the solutions of the EHL problem with the right asymptotes coming from the solution of the dry contact problem can be related to the solutions of the classic EHL problem for homogeneous materials. [ABSTRACT FROM AUTHOR]

Contacts of indentors with functionally graded elastic solids may produce pressures significantly different from the results obtained for homogeneous elastic materials (Hertzian results). It is even more sofor heavily loaded line elastohydrodynamically lubricated (EHL) contacts. The goal of the paper is to indicate two distinct ways the functionally graded elastic materials may alter the classic results for the heavily loaded line EHL contacts. Namely, besides pressure the other two main characteristics which are influenced by the nonuniformity of the elastic properties of the contact materials are lubrication film thickness and frictional stresslfriction force produced by lubricant flow. The approach used for analyzing the influence of functionally graded elastic materials on parameters of heavily loaded line EHL contacts is based on the asymptotic methods earlier developed by authors (Kudish, 2013, Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches, Chapman & HalllCRC Press, New York; Kudish and Covitch, 2010, Modeling and Analytical Methods in Tribology, Chapman & Halil CRC Press, New York; and Aizikovich et al., 2006, Contact Problems of Elasticity for Functionally Graded Materials, Fizmatlit, Moscow, Russia). More specifically, it is based on the analysis of contact problems for dry contacts of functionally graded elastic solids and the lubrication mechanisms in the inlet and exit zones as well as in the central region of heavily lubricated contacts. [ABSTRACT FROM AUTHOR]