Some Criteria for Coating Effectiveness in Heavily Loaded Line Elastohydrodynamically Lubricated Contacts--Part I: Dry Contacts.

Contacts of indentors with functionally graded elastic solids may produce pressures significantly different from the results obtained for homogeneous elastic materials (Hertzian results). It is even more sofor heavily loaded line elastohydrodynamically lubricated (EHL) contacts. The goal of the paper is to indicate two distinct ways the functionally graded elastic materials may alter the classic results for the heavily loaded line EHL contacts. Namely, besides pressure the other two main characteristics which are influenced by the nonuniformity of the elastic properties of the contact materials are lubrication film thickness and frictional stresslfriction force produced by lubricant flow. The approach used for analyzing the influence of functionally graded elastic materials on parameters of heavily loaded line EHL contacts is based on the asymptotic methods earlier developed by authors (Kudish, 2013, Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches, Chapman & HalllCRC Press, New York; Kudish and Covitch, 2010, Modeling and Analytical Methods in Tribology, Chapman & Halil CRC Press, New York; and Aizikovich et al., 2006, Contact Problems of Elasticity for Functionally Graded Materials, Fizmatlit, Moscow, Russia). More specifically, it is based on the analysis of contact problems for dry contacts of functionally graded elastic solids and the lubrication mechanisms in the inlet and exit zones as well as in the central region of heavily lubricated contacts. [ABSTRACT FROM AUTHOR]