Search

Purpose: This investigation aimed to examine the mediating effect of inflammatory biomarkers on the relationship between dust exposure and lung function levels among steelworkers., Methods: The study comprised 2,315 front-line workers employed at an iron and steel company in Tangshan, who underwent occupational health assessments through cluster sampling. Demographic and lifestyle data were collected via a self-administered questionnaire, while physical examinations measured parameters such as height and weight. Lung function was assessed using a portable pulmonary function tester (CHEST). Blood cell counts were uniformly analyzed using a Mindray fully automated biochemistry analyzer (BS-800). Inflammatory biomarkers, including leukocyte count, neutrophil count, lymphocyte count, and platelet count, were assessed, and the neutrophil-to-lymphocyte ratio and systemic immune inflammation index were computed. Generalized linear models and Spearman rank correlation analyses were employed to explore the interplay among dust exposure, inflammatory biomarkers, and alterations in lung function. A mediation analysis model was constructed to elucidate how inflammatory biomarkers mediate the relationship between dust exposure and lung function levels., Results: After adjusting for covariates, dust exposure was significantly associated with reduced lung function levels, with statistically significant differences observed between dust-exposed and non-exposed groups across various lung function indicators (P < 0.001). In the dust-exposed group, inflammatory biomarkers were elevated, showing significant correlations with FVC and FEV 1 (P < 0.05). However, the correlation between FEV 1 /FVC and various inflammatory biomarkers was insignificant (P > 0.05). Mediation analysis revealed that white blood cells and neutrophils partially mediated the association between dust exposure and FVC, with proportions of 1.75% and 1.09%, respectively. Similarly, white blood cells, neutrophils, and the systemic immune inflammation index partially mediated the association between dust exposure and FEV 1 , with proportions of 1.15%, 0.82%, and 0.82%, respectively., Conclusion: In conclusion, dust exposure poses a risk for decreased lung function levels. Inflammatory biomarkers derived from blood cells offer a valuable and easily obtainable means of identifying changes in lungfunction levels. Among these biomarkers, white blood cells, neutrophils, and the systemic immune inflammation index significantly mediate the association between dust exposure and lung function levels, although further exploration is needed to understand their underlying mechanisms., Competing Interests: Declarations Conflict of interest The authors declare no conflict of interest. Ethics approval All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards. This study was conducted in accordance with the Helsinki Declaration and approved by the Medical Ethics Review Committee of North China University of Science and Technology (No.16040). Consent to participate Informed consent was obtained from all individual participants included in the study., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study aimed to estimate workers' occupational lifetime exposure to chrysotile and examine the respiratory symptoms and lung cancer risk. A total of 112 workers were interviewed about their occupational histories. Exposure modeling using information on the determinants of exposure was used to estimate chrysotile emissions. The cumulative lifetime exposure was then assessed for each worker. Respiratory symptoms were obtained using a validated questionnaire. Lung cancer mortality rate was also predicted using a model. Almost all the workers were male and young (mean age = 30 years, SD = 7). The estimated lifetime occupational chrysotile inhalation exposure ranged from 0.0001 to 0.0486 f/mL.years (median = 0.0018 f/mL.years, IQR = 0.486). A high prevalence of cough symptom (11.7%), and low estimated cancer risk (<1%) were reported. In conclusion, the lung cancer risk among our cohort of workers was at a low level because of lower cumulative lifetime occupational chrysotile exposure., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Objective: To investigate the health status and the influencing factors of abnormal lung function of welding fumes exposure workers in Tianjin from 2020 to 2022, and to provide theoretical basis for the protection and intervention of key occupational diseases. Methods: In October 2023, the relevant data of occupational health examination of welding fumes exposure workers in Tianjin from 2020 to 2022 (10831, 10758 and 21717 in 2020, 2021 and 2022, respectively) were collected from the China Disease Prevention and Control Information Platform. The electrocardiogram, chest radiograph and lung function abnormalities of workers in each year were analyzed, as well as the association between lung function abnormalities and gender, age, working age, region, etc. With gender, age and years of service as independent variables, logistic regression analysis was performed year by year on the influencing factors of abnormal lung function. Results: From 2020 to 2022, electrocardiogram, chest radiograph and lung function abnormality rates of workers exposed to welding fumes had statistical significances (χ(2)=301.79, 7.87, 1614.54, P <0.05), and the lung function abnormality rate showed a downward trend year by year (χ(2)(trend)=1516.19, P <0.001). The abnormal rates of lung function in male workers exposed to welding fumes were higher than those in female workers (χ(2)=61.65, 8.04, 15.22, P <0.05). With the increase of age, the abnormal rate of lung function showed an increasing trend (χ(2)(trend)=6.47, 10.81, 4.72, P <0.05). The abnormal rates of lung function in the four districts around the city in each year were 22.05% (318/1442), 8.91% (171/1919) and 6.48% (273/4212), respectively. Year by year logistic regression analysis showed that females were the protective factors for abnormal lung function ( OR =0.369, 0.568, 0.546; 95% CI : 0.298-0.458, 0.367-0.879, 0.388-0.767; P <0.05) . Conclusion: Attention should be paid to the health status of welding fumes workers in Tianjin, focusing on the protection of middle-aged male workers, and effective prevention measures should be taken for key areas and industries such as the four districts around the city.

Background: Workplace atmospheric exposure monitoring is the standard method to assess and control hazardous dust exposure; however, feasibility and cost constraints often limit its application. In recent decades, evidence-based tools supporting exposure modelling and control banding have been developed to aid in predicting and/or controlling occupational exposure to various contaminants. However, there is limited information on the availability and applicability of evidence-based tools for predicting and/or controlling occupational dust exposure, as well as on the methods for evaluating these tools across different exposure scenarios. Therefore, this planned scoping review aims to identify existing evidence-based tools for dust exposure predicting and/or controlling and to present evaluation approaches., Methods: We will employ the scoping review methods developed by the Joanna Briggs Institute (JBI). The search will be conducted on PubMed, Scopus, and Web of Science databases, in addition to grey literature from the National Institute for Occupational Safety and Health (NIOSH) and advanced Google searches. Studies will be included if they report evidence-based tools for predicting and/or controlling dust exposure using quantitative or semi-quantitative designs and provide a detailed explanation of the methods used for tool development. There will be no restrictions on publication date or geographical location; however, only studies published in English will be considered. Studies focusing exclusively on dust exposure in environmental settings will be excluded. Each member of the review team will screen titles, abstracts, and full texts independently and in collaboration, based on the inclusion criteria. The extracted data will encompass details such as author, title, country, accessible platforms, method/tool names, intended users, types of dust, and occupational settings. Descriptions of the identified tools will include numerical data and narrative summaries to ensure a comprehensive overview., Trial Registration: OSF (https://doi.org/10.17605/OSF.IO/S6EZJ)., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Kabito et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Chronic obstructive pulmonary disease (COPD) has become a global public health problem. Risk factors for COPD include smoking, occupational dust, air pollutants, and genetic, developmental, and social factors. The list of occupational diseases of the International Labour Organization, the European Union and Taiwan, China all includes COPD caused by occupational dust. At present, there is no diagnostic standard for COPD caused by occupational dust in the mainland of China. In order to promote the full protection of workers' rights and interests and better prevent occupational COPD, this paper reviewed the association between occupational dust and COPD, so as to draw public attention to chronic obstructive pulmonary disease caused by occupational dust.

The presence of BTEX (Benzene, Toluene, Ethylbenzene, and Xylene) compounds in beauty salons has raised concerns about potential health risks. This study aimed to measure the levels of BTEX compounds in the air of beauty salons in Lahijan, Iran and assess the associated health risks. Air samples were collected from 15 beauty salons, and the concentrations of BTEX compounds were measured according to 1501 NIOSH standard method. The results showed that the mean concentrations of benzene (20.62 µg/m 3 ), toluene (18.3 µg/m 3 ), ethylbenzene (38.36 µg/m 3 ), and O and P-xylene (27.35, 23.6 µg/m 3 ) were above the recommended levels. The indoor to outdoor ratios for benzene, toluene, ethylbenzene, O and P-xylene were 3.04, 2.36, 3.75, 4.89, and 6.54, respectively. Also, the toluene/benzene (T/B) ratio in indoor and outdoor was 20.9 and 2.68 respectively. Almost half of the technicians (49.12%) reported adverse health effects, including joint pain, itchy eyes and nose, and respiratory allergies. The IARC guideline suggests that there is a potential risk of cancer development for individuals in all salons with LCR values exceeding 10 -6 , but the HQ index values indicate no non-carcinogenic risk. The findings suggest that beauty salon workers and customers are at risk of developing health problems from exposure to BTEX compounds. Effective risk management strategies, such as proper ventilation, use of personal protective equipment, and substitution of harmful chemicals with safer alternatives, to minimize exposure and protect the health of salon workers and customers recommended., (© 2024. The Author(s).)

Background: In Brazil, gas stations are not self-service; attendants fill fuel tanks, leading to chronic exposure to BTEX (benzene, toluene, ethylbenzene, and xylenes), which can cause bone marrow degeneration and immunosuppression. This systematic review highlights recent advances in biomonitoring gas station workers (GSW)., Methods: We searched PubMed, Medline, and Cochrane databases for articles in English, French, Portuguese, and Spanish from 2014 to April 30, 2024, using multiple search terms., Results: A total of 1,086 articles were identified, 322 were analyzed, and 13 were included in the final review. We highlighted recent technologies in GSW biomonitoring, such as immunophenotyping, molecular cytogenetics (FISH), and measuring miRNAs and inflammatory markers via ELISA. We also explored the link between benzene exposure and immunosuppression and suggested a potential association with chronic inflammation.  Conclusion: GSWs face significant health risks and require continuous clinical monitoring, even in the absence of overt disease. Effect biomarkers may indicate early biological responses to benzene toxicity and highlight potential health risks. However, there is no universally accepted gold standard for assessing these biomarkers.

Objective: Meat processing is among the most extensive industries globally. However, data on the effects of occupational exposure on the pulmonary health of slaughterhouse workers is limited. Ascertaining the impact of the slaughterhouse atmosphere on the breathing habits of laborers exposed to it and the inflammatory markers associated with it was the aim of the current investigation., Methods: A cross-sectional study was performed on 82 non-smoker subjects of 41 male workers working in one of the major slaughterhouses in Cairo, Egypt, matched to 41 controls of administrative personnel. An elaborate questionnaire encompassing medical and occupational history was administered to each participant in the research. General and local systemic examinations and ventilatory function tests were carried out, and serum levels of interleukin 6 (IL-6) and high-sensitivity C-reactive protein (hsCRP) were measured., Results: Respiratory symptoms were more prevalent with a statistically significant decline in ventilatory function parameters (FVC%, FEV1%, FEV1/FVC, FEF 25%, FEF 50%, FEF 75%, and PEF%) among the exposed group compared to those of control. In addition, there was a significantly higher serum level of inflammatory markers (IL-6 and hsCRP) among the exposed group compared to the control group, with a negative correlation with ventilatory functions. Moreover, there was a positive association between levels of serum IL-6 and hsCRP and the age and duration of employment of workers., Conclusion: There was a notable increase in the prevalence of respiratory disorders and inflammatory markers among slaughterhouse workers. Additionally, there was a substantial decrease in ventilatory function parameters, which could be attributed to the bioaerosols they encountered in the workplace., (© 2024. The Author(s).)

Occupational exposure to welding fumes constitutes a serious health concern. Although the effects of fumes on the respiratory tract have been investigated, few apparent reports were published on their effects on the skin. The purpose of this study was to investigate the effects of exposure to welding fumes on skin cells, focusing on interleukin-24 (IL-24), a cytokine involved in the pathophysiology of skin conditions, such as atopic dermatitis and psoriasis. Treatment with welding fumes increased IL-24 expression and production levels in human dermal microvascular endothelial cells (HDMEC) which were higher than that in normal human epidermal keratinocytes. IL-24 levels in Trolox and deferoxamine markedly suppressed welding fume-induced IL-24 expression in HDMEC, indicating that oxidative stress may be involved in this cytokine expression. IL-24 released from HDMEC protected keratinocytes from welding fume-induced damage and enhanced keratinocyte migration. Serum IL-24 was higher in welding workers than in general subjects and was positively correlated with elevated serum levels of 8-hydroxy-2'-deoxyguanosine, an oxidative stress marker. In summary, welding fumes enhanced IL-24 expression in HDMEC, stimulating keratinocyte survival and migration. IL-24 expression in endothelial cells may act as an adaptive response to welding-fume exposure in the skin.

Occupational exposure to manganese (Mn) primarily occurs through the inhalation of manganese-containing fumes and dust, with welding environments being significant sources of such exposure. Elevated levels of Mn in welding fumes can lead to a neurological syndrome known as manganism. A 28-yr-old male welder with 14 yr of experience, is presenting with complaints of forgetfulness, reasoning disorder, and decreased mental functions persisting for 10 yr. Three months ago, when he started working at the new workplace, he underwent employment screening conducted by the workplace physician. During this screening process, the physician identified a high whole blood Mn level of 25.9 µg/l. The diagnosis of manganism in this patient was established based on exposure to Mn and its compounds, high levels of Mn detected in the whole blood, hyperactive patellar reflexes observed during the physical examination, cranial Magnetic Resonance Imaging (MRI) findings consistent with manganism and complaints reported by the patient that are characteristic of manganism. In this report, the aim is to emphasize the significance of taking a comprehensive occupational history and to draw attention the potential health hazards associated with Mn and its compounds.

Welding fumes are a Group 1 (carcinogenic to humans) carcinogen as classified by the International Agency for Research on Cancer. The process of welding creates inhalable fumes rich in iron (Fe) that may also contain known carcinogenic metals such as chromium (Cr) and nickel (Ni). Epidemiological evidence has shown that both mild steel (Fe-rich) and stainless steel (Fe-rich + Cr + Ni) welding fume exposure increases lung cancer risk, and experimental animal data support these findings. Copper-nickel (CuNi) welding processes have not been investigated in the context of lung cancer. Cu is intriguing, however, given the role of Cu in carcinogenesis and cancer therapeutics. This study examines the potential for a CuNi fume to induce mechanistic key characteristics of carcinogenesis in vitro and to promote lung tumorigenesis, using a two-stage mouse bioassay, in vivo. Male A/J mice, initiated with 3-methylcholanthrene (MCA; 10 µg/g), were exposed to CuNi fumes or air by whole-body inhalation for 9 weeks (low deposition-LD and high deposition-HD) and then sacrificed at 30 weeks. In BEAS-2B cells, the CuNi fume-induced micronuclei and caused DNA damage as measured by γ-H2AX. The fume exhibited high reactivity and a dose-response in cytotoxicity and oxidative stress. In vivo, MCA/CuNi HD and LD significantly decreased lung tumor size and adenomas. MCA/CuNi HD exposure significantly decreased gross-evaluated tumor number. In summary, the CuNi fume in vitro exhibited characteristics of a carcinogen, but in vivo, the exposure resulted in smaller tumors, fewer adenomas, less hyperplasia severity, and with HD exposure, less overall lung lesions/tumors., (Published by Oxford University Press 2024.)

Purpose: Welders are more likely to develop neurobehavioral disorders because of their exposure to neurotoxic metals such as manganese. This study aimed to measure the neurobehavioral performance of welders occupationally exposed to manganese at welding enterprises and its relationship with the workplace environment., Methods: It is a comparative cross-sectional study carried out on 130 welders working at 50 welding enterprises in Menoufia governorate, Egypt, compared to 130 non-occupationally exposed controls., Results: It was found that the environments of the studied welding enterprises had levels of respirable dust, manganese, and total welding fumes that exceeded internationally permissible limits. In addition, the mean blood manganese levels were significantly higher among welders (4.16 ± 0.61) than the controls (1.72 ± 0.41). Welders had a significantly higher prevalence of neurological manifestations and lower performance of neurobehavioral tests. Lower neurobehavioral performance among welders was significantly correlated with increased work duration and blood levels in some tests., Conclusion: To lessen the fumes in the breathing zone of workers, it is therefore strongly recommended to regularly wear high-quality personal protective equipment, especially masks, and to ensure proper ventilation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: Occupational exposure to welding fumes is linked to a higher risk of cardiovascular disease; however, the threshold exposure level is unknown. Here, we aimed to identify changes in proteins associated with cardiovascular disease in relation to exposure to welding fumes., Methods: Data were obtained from two timepoints six years apart for 338 non-smoking men (171 welders, 167 controls); of these, 174 (78 welders, 96 controls) had measurements available at both timepoints. Exposure was measured as personal respirable dust (adjusted for personal protective equipment), welding years, and cumulative exposure. Proximity extension assays were used to measure a panel of 92 proteins involved in cardiovascular processes in serum samples. Linear mixed models were used for longitudinal analysis. The biological functions and diseases related to the identified proteins were explored using the Ingenuity Pathway Analysis software., Results: At both timepoints, the median respirable dust exposure was 0.7 mg/m 3  for the welders. Seven proteins were differentially abundant between the welders and controls and increased incrementally with respirable dust: FGF23, CEACAM8, CD40L, PGF, CXCL1, CD84, and HO1. CD84 was significant after adjusting for multiple comparisons. These proteins have been linked to disorders of blood pressure, damage related to clogged blood vessels, and chronic inflammatory disorders., Conclusion: Exposure to mild steel welding fumes below current occupational exposure limits for respirable particles and welding fumes in Europe and the US (1-5 mg/m 3 ) was associated with changes in the abundance of proteins related to cardiovascular disease. Further research should evaluate the utility of these proteins as prospective biomarkers of occupational cardiovascular disease., (© 2024. The Author(s).)

Inhalation of welding fumes can cause metal accumulation in the brain, leading to Parkinsonian-like symptoms. Metal accumulation and altered neurochemical profiles have been observed using magnetic resonance imaging (MRI) in highly exposed welders, being associated with decreased motor function and cognition. While MRI is impractical to use as a health risk assessment tool in occupational settings, toenail metal levels are easier to assess and have been demonstrated to reflect an exposure window of 7-12 months in the past. Yet, it is unclear whether toenail metal levels are associated with brain metal levels or changes in metabolism, which are the root of potential health concerns. This study investigates whether toenail manganese (Mn) and iron (Fe) levels, assessed at several time points, correlate with brain Mn and Fe levels, measured by MRI, as well as brain GABA, glutamate (Glu), and glutathione (GSH) levels, measured by Magnetic Resonance Spectroscopy (MRS), in seventeen Mn-exposed welders. Quantitative T1 and R2* MRI maps of the whole brain, along with GABA, Glu, and GSH MRS measurements from the thalamus and cerebellum were acquired at baseline (T0). Toenail clippings were collected at T0 and every three months after the MRI for a year to account for different exposure periods being reflected by toenail clippings and MRI. Spearman correlations of toenail metal levels were run against brain metal and metabolite levels, but no significant associations were found for Mn at any timepoint. Cerebellar GSH positively correlated with toenail Fe clipped twelve months after the MRI (p = 0.05), suggesting an association with Fe exposure at the time of the MRI. Neither thalamic GABA nor Glu correlated with toenail Fe levels. In conclusion, this study cannot support toenail Mn as a proxy for brain Mn levels or metabolic changes, while toenail Fe appears linked to brain metabolic alterations, underscoring the importance of considering other metals, including Fe, in studying Mn neurotoxicity., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Ulrike Dydak reports a relationship with American Regent Inc that includes: consulting or advisory. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Long-haul truck drivers (LHTDs) face a number of occupational hazards. One such hazard is exposure to diesel engine exhaust (DEE). However, this concept has yet to be analyzed. To address this gap, a concept analysis was conducted to explore the effects of DEE in relation to lung cancer., Methods: Walker and Avant's eight-step concept analysis method was utilized: concept selection, analysis purpose, concept uses, defining attributes, model case, borderline case, antecedents and consequences, and empirical referents. PubMed, Scopus, and CINAHL databases were searched for relevant literature., Findings: Diesel engine exhaust was identified as a mixture of gases and particulates that are considered carcinogenic. Defining attributes of DEE for truckers include respiratory effects such as decreased peak flow and increased airway resistance leading to symptoms such as a phlegm-producing cough, eye and throat irritation, exacerbation of asthma symptoms, and allergic responses. The identified level of DEE exposure associated with these attributes is 75 μg EC/m 3 for 1 to 2 hours daily or a long-term exposure of 10 μg EC/m 3 . The conceptual definition of DEE in truckers was illustrated by the attributes, antecedents, consequences, model case, and empirical referents., Conclusion: Lung cancer was identified as a significant consequence of occupational DEE exposure for LHTDs. This analysis highlights the need for future research to develop interventions that will safeguard truckers from the adverse health effects of DEE exposure., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Air pollution is recognized as a risk factor for cardiovascular diseases; however, the precise underlying mechanisms remain unclear. This study investigated the impact of occupational air pollution exposure on endothelial function in workers within the steel industry. Specifically, we examined male employees in the coke-making division of the Isfahan Steel Company in Iran, as well as those in administrative roles with no known history of cardiovascular risk. Data on age, body mass index, duration of employment, blood pressure, fasting blood sugar, and lipid profile were collected. To assess endothelial function, flow-mediated dilation (FMD) was measured. The baseline brachial artery diameter was greater (mean difference [95% CI] = 0.068 mm [0.008 to 0.128]), while the FMD was lower (mean difference [95% CI] = -0.908 % [-1.740 to -0.075]) in the coke-making group than in the control group. After controlling for potential confounding variables, it was observed that working in the coke-making sector of the industry was associated with lower FMD (F = 3.954, p = .049). These findings indicated that occupational air pollution exposure among workers in the steel industry is linked to impaired endothelium-dependent vasodilation., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Background: Crystalline silica (CS) exposure can cause serious lung disease in humans, but mechanisms of pulmonary toxicity have not been completely elucidated., Aims: To assess pro-inflammatory and anti-inflammatory biomarkers and biomarkers related to the development of chronic obstructive pulmonary disease and fibrosis in serum of rock drillers exposed to CS., Methods: Rock drillers (N = 123) exposed to CS and non-specified particulate matter (PM) were compared to 48 referents without current or past exposure to PM in a cross-sectional study., Results: The rock drillers had been exposed to CS for 10.7 years on average. Geometric mean (GM) current exposure was estimated to 36 µg/m 3 . Their GM concentration of matrix metalloproteinase 12 (MMP-12) was significantly higher (16 vs. 13 ng/L; p = 0.04), while interleukin (IL) 6 and IL-8 were significantly lower compared to the referents. Also pentraxin 3 was significantly lower (3558 vs. 4592 ng/L; p = 0.01) in the rock drillers. A dose-response relationship was observed between cumulative exposure to CS and MMP-12, the highest exposed subgroup having significantly higher MMP-12 concentrations than the referents., Conclusion: Exposure to CS may increase circulating MMP-12 concentrations in a dose-response related fashion. The results may also suggest a down-regulation of pro-inflammatory pathways., (© 2024. The Author(s).)

Purpose of Review: This review investigates occupational inhalation hazards associated with biologically derived airborne particles (bioaerosols) generated in indoor cannabis cultivation and manufacturing facilities., Recent Findings: Indoor cannabis production is growing across the US as are recent reports of respiratory diseases among cannabis workers, including occupational asthma morbidity and mortality. More information is needed to understand how bioaerosol exposure in cannabis facilities impacts worker health and occupational disease risk. Preliminary studies demonstrate a significant fraction of airborne particles in cannabis facilities are comprised of fungal spores, bacteria, and plant material, which may also contain hazardous microbial metabolites and allergens. These bioaerosols may pose pathogenic, allergenic, toxigenic, and pro-inflammatory risks to workers. The absence of multi-level, holistic bioaerosol research in cannabis work environments necessitates further characterization of the potential respiratory hazards and effective risk prevention methods to safeguard occupational health as the cannabis industry continues to expand across the US and beyond., (© 2024. The Author(s).)

Background: Chronic kidney disease (CKD) carries a high public health burden yet little is known about the relationship between metalworking fluid (MWF) aerosols, occupational noise and CKD. We aimed to explore the relationship between occupational MWF aerosols, occupational noise and CKD., Methods: A total of 2,738 machinists were sampled from three machining companies in Wuxi, China, in 2022. We used the National Institute for Occupational Safety and Health (NIOSH) method 5524 to collect individual samples for MWF aerosols exposure, and the Chinese national standard (GBZ/T 189.8-2007) method to test individual occupational noise exposure. The diagnostic criteria for CKD were urinary albumin/creatinine ratio (UACR) of ≥ 30 mg/g and reduced renal function (eGFR < 60 mL.min - 1 . 1.73 m - 2 ) lasting longer than 3 months. Smooth curve fitting was conducted to analyze the associations of MWF aerosols and occupational noise with CKD. A segmented regression model was used to analyze the threshold effects., Results: Workers exposed to MWF aerosols (odds ratio [OR] = 2.03, 95% confidence interval [CI]: 1.21-3.41) and occupational noise (OR = 1.77, 95%CI: 1.06-2.96) had higher prevalence of CKD than nonexposed workers. A nonlinear and positive association was found between increasing MWF aerosols and occupational noise dose and the risk of CKD. When daily cumulative exposure dose of MWF aerosols exceeded 8.03 mg/m 3 , the OR was 1.24 (95%CI: 1.03-1.58), and when occupational noise exceeded 87.22 dB(A), the OR was 1.16 (95%CI: 1.04-1.20). In the interactive analysis between MWF aerosols and occupational noise, the workers exposed to both MWF aerosols (cumulative exposure ≥ 8.03 mg/m 3 -day) and occupational noise (L EX,8 h ≥ 87.22 dB(A)) had an increased prevalence of CKD (OR = 2.71, 95%CI: 1.48-4.96). MWF aerosols and occupational noise had a positive interaction in prevalence of CKD., Conclusions: Occupational MWF aerosols and noise were positively and nonlinearly associated with CKD, and cumulative MWF aerosols and noise exposure showed a positive interaction with CKD. These findings emphasize the importance of assessing kidney function of workers exposed to MWF aerosols and occupational noise. Prospective and longitudinal cohort studies are necessary to elucidate the causality of these associations., (© 2024. The Author(s).)

Objectives: Increasing epidemiological and experimental evidence suggests that particle exposure is an environmental risk factor for chronic kidney disease (CKD). However, only a few case-control studies have investigated this association in an occupational setting. Hence, our objective was to investigate associations between particle exposure and CKD in a large cohort of Swedish construction workers., Methods: We performed a retrospective cohort study in the Swedish Construction Workers' Cohort, recruited 1971-1993 (n=286 089). A job-exposure matrix was used to identify workers exposed to nine different particulate exposures, which were combined into three main categories (inorganic dust and fumes, wood dust and fibres). Incident CKD and start of renal replacement therapy (RRT) were obtained from validated national registries until 2021 and analysed using adjusted Cox proportional hazards models., Results: Exposure to inorganic dust and fumes was associated with an increased risk of CKD and RRT during working age (adjusted HR for CKD at age <65 years 1.15, 95% CI 1.05 to 1.26). The elevated risk did not persist after retirement age. Exposure to cement dust, concrete dust and diesel exhaust was associated with CKD. Elevated HRs were also found for quartz dust and welding fumes., Conclusions: Workers exposed to inorganic particles seem to be at elevated risk of CKD and RRT. Our results are in line with previous evidence of renal effects of ambient air pollution and warrant further efforts to reduce occupational and ambient particle exposure., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

The lifetime risk of silicosis associated with low-level occupational exposure to respirable crystalline silica remains unclear because most previous radiographic studies included workers with varying exposure concentrations and durations. This study assessed the prevalence of silicosis after lengthy exposure to respirable crystalline silica at levels ≤ 0.10 mg/m 3 . Vermont granite workers employed any time during 1979-1987 were traced and chest radiographs were obtained for 356 who were alive in 2017 and residing in Vermont. Work history, smoking habits and respiratory symptoms were obtained by interview, and exposure was estimated using a previously developed job-exposure matrix. Associations between radiographic findings, exposure, and respiratory symptoms were assessed by ANOVA, chi-square tests and binary regression. Fourteen workers (3.9%) had radiographic evidence of silicosis, and all had been employed ≥30 years. They were more likely to have been stone cutters or carvers and their average exposure concentrations and cumulative exposures to respirable crystalline silica were significantly higher than workers with similar durations of employment and no classifiable parenchymal abnormalities. This provides direct evidence that workers with long-term exposure to low-level respirable crystalline silica (≤0.10 mg/m 3 ) are at risk of developing silicosis.

Background: Our aimed to conduct a meta-analysis of cohort studies on risk of genitourinary (GU) cancers in workers exposed to welding fumes (WF)., Methods: We performed a systematic review of studies published on Pubmed, Scopus and Embase following PRISMA criteria. Two researchers selected cohort studies on WF exposure. From 2582 articles, 7 non-overlapping studies were included. Quality of studies was scored according to CASP. We run a random effects meta-analysis to calculate the relative risk (RR) and 95% confidence intervals (CI) of GU cancer, overall and stratified by cancer, country, and quality score., Results: We included seven studies reporting results on GU cancers, including prostate, bladder and kidney cancer (PC, BC, and KC). The RR was 1.19 (95% CI = 1.07-1.32, 16 risk estimates) for GU cancer; 1.13 (95% CI = 0.90-1.42, 4 risk estimates) for PC; 1.26 (95% CI = 0.98-1.60, 7 risk estimates) for BC and 1.28 (95% CI = 1.12-1.47, 5 risk estimates) for KC. Heterogeneity was present in all meta-analyses (p < 0.001). The increased risk was more pronounced in North American than in European studies (respectively, OR = 1.35, 95% CI = 1.18-1.55; OR = 1.13, 95% CI = 1.01-1.27 p heterogeneity = 0.03). There was no heterogeneity according to quality score (p = 0.4). Data were insufficient to investigate associations by industry or welding type. Publication bias for each cancer was excluded., Conclusion: This meta-analysis suggests increased risk of KC and BC, but not of PC, in workers exposed to WF. Confounding by other occupational and non-occupational risk factors could not be excluded. Data were not adequate to address the risk of specific exposure circumstances., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Exposure to welding fumes can lead to different respiratory health disorders, including lung cancer, due to long-term exposures. In Ethiopia, large numbers of people are engaged in the welding sector. Often, these workers are exposed to welding fumes at their workplaces, however, the level of exposure and its health effects have never been studied., Objective: To measure the level of personal welding fume exposure and assess chronic respiratory symptoms and associated factors, among micro and small-scale enterprise metal workshop workers, in Akaki Kality Sub city, Ethiopia., Methods: A comparative cross-sectional study involving 226 welders and 217 controls. Chronic respiratory symptoms were assessed using a standardized questionnaire adopted from the American Thoracic Society (ATS). Welding fumes were collected from the welder's breathing zone using 37 mm close-faced plastic cassettes fitted with Polyvinyl Chloride (PVC) filters connected to Casella pumps at an airflow rate of 2 L/min., Result: The overall prevalence of chronic respiratory symptoms among welders and controls were 54 (23.9%) and 20 (9.2%) respectively. The geometric mean and geometric standard deviation (GSD) of personal welding fume exposure, among welders was 5.98 mg/m 3 (± GSD = 1.54). In this study, 53.3% of the samples exceeded the Occupational Exposure Limit defined by the American Conference of Governmental Industrial Hygiene. Chronic respiratory symptoms were significantly associated with educational status (Adjusted Odds Ratio (AOR): 5.11, 95% CI: 1.35, 19.33), respiratory protective equipment use (AOR: 3.33, 95% CI: 1.52, 7.31), safety training (AOR: 2.41, 95% CI: 1.10, 5.28), smoking (AOR:3.57, 95% CI: 1.54, 8.23), welding machine maintenance (AOR: 1.87, 95% CI: 1.01, 3.59) and welding site (i.e. indoors vs. outdoor) (AOR: 6.85. 95% CI: 2.36, 19.89)., Conclusions: The prevalence of chronic respiratory symptoms among welding workers was significantly higher than controls. More than half of the samples exceeded the Occupational Exposure Limit. Educational status, implementation of safety training, and welding sites were significantly associated with chronic respiratory symptoms. The results suggested a need to reduce welding fume exposure to improve the respiratory health of the workers., (© 2024. The Author(s).)

Objective: There is an occupational health concern about welders' inhalation of toxic aluminium fumes. We investigated whether serum aluminium level (SAL) and demographic variables can significantly predict physical health parameters, cognition, and quality of life (QoL) among welders., Methods: The cross-sectional study involved 100 age- and location-matched men (50 welders and 50 non-welders). SAL obtained using a graphite furnace atomic absorption spectrometer, and data collected using blood pressure and body mass index (BMI) apparatuses, biodata form, pain rating scale, General Practitioner Assessment of Cognition, WHOQoL-BREF, and Nordic musculoskeletal symptoms (MSS) questionnaire were analysed using independent samples t test, chi-square, Pearson's correlation, and hierarchical linear regression., Results: Welders had significantly higher SAL (mean difference [MD] = 1.77 µg/L, p < 0.001), lower QoL (MD = 3.92, p = 0.039), and higher prevalence of MSS on the neck (χ 2  = 10.187, p = 0.001), shoulder (χ 2  = 9.007, p = 0.003), upper back (χ 2  = 6.832, p = 0.009), and knee (χ 2  = 12.190, p < 0.001) than non-welders. There was a significant bivariate association between SAL, systolic blood pressure (β = 0.313, p = 0.002), and BMI (β = 0.279, p = 0.005), but not pain intensity, cognition, or QoL. SAL remained a significant predictor of systolic blood pressure after adjustment for physical health and QoL parameters (β = 0.191, p = 0.044). The association between SAL and social QoL became significant after adjustment for physical health and other QoL domains (β = - 0.210, p = 0.032) and demographic variables (β = - 0.233, p = 0.046)., Conclusion: Welders had significantly higher SAL, musculoskeletal symptoms, blood pressure, and lower QoL than non-welders. SAL was associated with adverse physical health parameters and social-related QoL, not cognition. We recommend routine aluminium bioavailability and physical health checks among welders., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Welding fumes have an important role to create the adverse health effects. So, the aim of this study was to use of multiple occupational health risk assessment models for metal fumes in welding process. This cross-sectional study was conducted among welding workers. Sampling of heavy metals such as Sn, Zn, Al, Fe, Cd, Pb, Cu, Mn, Ni, Cr, and As was provided based on the National Institute for Occupational Safety and Health (NIOSH) method 7300 and analyzed by inductively coupled plasma mass spectroscopy (ICP-MS). Risk assessment was managed by four methods including Malaysia's method, Control of Substances Hazardous to Health Essentials (COSHH model), Chinese OHRA standard (GBZ/T 298-2017), and EPA method. Also, Monte Carlo simulation was used to examine the uncertainties by using the Crystal Ball tool. To compare the models, the risk levels of each model were converted into the risk ratio and the SPSS 22.0 software was used to the statistical analysis. The consistency of the two occupational health risk assessment models was examined by Cohen's Kappa. Risk ration was the highest level for Cr (VI) fumes in all models. Also, carcinogenic risk was unacceptable for all examined fumes. Moreover, non-carcinogenic risk was the highest (HI > 1) for As fumes. Mont Carlo simulations suggested that exposure time (ET) had a significant effect on the risk. Also, there was a good consistency between Malaysia method/GBZ/T 298-2017 and COSHH model/GBZ/T 298-2017. Therefore, it is recommended that the engineering and administrative controls should be provided to reduce exposure., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Objective: Dust exposure is high in several industries. We investigated associations of exposure in paper mills, wood pellet plants, and iron foundries with lung function impairment., Methods: Respirable silica, inhalable paper dust, or inhalable wood dust were collected as personal samples and spirometry was performed. Multiple linear regression analyzed associations with FEV 1 %pred and FVC%pred., Results: Wood pellet workers with high exposure to inhalable dust had lower FEV 1 %pred (95% CI) (-9.4 [-16 to -2.6]) and FVC%pred (-9.8 [-15 to -4.0]) compared with lowest exposure level. Workers at paper mills and foundries had no dose-dependent association but lower FEV 1 %pred and FVC%pred than in workers at wood pellets plants., Conclusions: Increased exposure to inhalable wood dust is associated with decreased lung function. Foundry and paper mill workers have generally lower lung function than wood pellet workers. Spirometry should be considered in workers in industries with airborne particulate matter pollution., Competing Interests: Conflict of interest: None declared., (Copyright © 2024 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the American College of Occupational and Environmental Medicine.)

Background: We previously found that occupational exposure to diesel engine exhaust (DEE) was associated with alterations to 19 biomarkers that potentially reflect the mechanisms of carcinogenesis. Whether DEE is associated with biological alterations at concentrations under existing or recommended occupational exposure limits (OELs) is unclear., Methods: In a cross-sectional study of 54 factory workers exposed long-term to DEE and 55 unexposed controls, we reanalysed the 19 previously identified biomarkers. Multivariable linear regression was used to compare biomarker levels between DEE-exposed versus unexposed subjects and to assess elemental carbon (EC) exposure-response relationships, adjusted for age and smoking status. We analysed each biomarker at EC concentrations below the US Mine Safety and Health Administration (MSHA) OEL (<106 µg/m 3 ), below the European Union (EU) OEL (<50 µg/m 3 ) and below the American Conference of Governmental Industrial Hygienists (ACGIH) recommendation (<20 µg/m 3 )., Results: Below the MSHA OEL, 17 biomarkers were altered between DEE-exposed workers and unexposed controls. Below the EU OEL, DEE-exposed workers had elevated lymphocytes (p=9E-03, false discovery rate (FDR)=0.04), CD4+ count (p=0.02, FDR=0.05), CD8+ count (p=5E-03, FDR=0.03) and miR-92a-3p (p=0.02, FDR=0.05), and nasal turbinate gene expression (first principal component: p=1E-06, FDR=2E-05), as well as decreased C-reactive protein (p=0.02, FDR=0.05), macrophage inflammatory protein-1β (p=0.04, FDR=0.09), miR-423-3p (p=0.04, FDR=0.09) and miR-122-5p (p=2E-03, FDR=0.02). Even at EC concentrations under the ACGIH recommendation, we found some evidence of exposure-response relationships for miR-423-3p (p trend =0.01, FDR=0.19) and gene expression (p trend =0.02, FDR=0.19)., Conclusions: DEE exposure under existing or recommended OELs may be associated with biomarkers reflective of cancer-related processes, including inflammatory/immune response., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2023. No commercial re-use. See rights and permissions. Published by BMJ.)

Objective: Pottery-related activities are characterized by the emission of multiple air pollutants in the form of particulate matter, gases, and organic compounds. These pollutants are associated with adverse neuropsychological effects. This study aimed at investigating the effect of occupational exposure to air pollutants on the neuropsychiatric health., Methods: A total of 180 male workers (90 exposed workers and 90 administrative employees) were recruited from pottery-making activities in the Fawakher region located in old Cairo (Misr Al-Kadema); the administrative employees were the control group. Personal, medical, and family histories, general and neurological clinical examination, and neuropsychological assessments were recorded. Serum levels of 4-hydroxy-2-nonenal levels (4HNE) were measured by ELISA. Environmental measurement of workplace air pollutants was performed., Results: Environmental monitoring of the workplace revealed that workers are exposed to high levels of SO 2 and NO 2 as these exceeded the national standard levels. Compared to the control group, the exposed workers' group demonstrated a significant decrease in digit forwards score, digit backward score, and symbol digit score and a significant higher Hamilton Depression Scale score, and Benton Visual Retention score. The level of 4HNE was significantly increased among the exposed workers' group compared to that of the control group., Conclusion: Occupational exposure to air pollutants is associated with impairment in neuropsychological functions, with a corresponding increase in the serum level of 4HNE, which is a biomarker for oxidative stress among Egyptian pottery workers., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

There have been numerous reports of welder's worker exposure to metal fumes. Carcinogenic and non-carcinogenic (neurological, dermal, and etc.) effects are the adverse outcomes of exposure to welding fumes. In this review study, data were collected from previous studies conducted in Iran from 1900 to 2020. The risk of carcinogenicity and non-carcinogenicity due to exposure to welding metal fumes was assessed using the United States Environmental Protection Agency (USEPA) method based on the Monte Carlo simulation (MCS). Results showed mean of metal fume concentration in gas welding was in the range of 1.8248 to 1060.6 (µg/m 3 ) and in arc welding was 54.935 to 4882.72 (µg/m 3 ). The mean concentration of fumes in gas welding is below the recommended American Conference of Governmental Industrial Hygienists (ACGIH) standard exposure limit except for manganese, and in the arc welding, all metal fume concentrations are below the standard exposure limit except for manganese and aluminum. The results showed that the risk of carcinogenicity due to exposure to nickel, manganese in both gas and arc welding, and cadmium in gas welding was higher than standard level (hazard quotient (HQ) more than 1). Cancer risk due to exposure to nickel in both gas and arc welding was probable (1 × 10 -6  < cancer risk (CR) < 1 × 10 -4 ). Health risk assessment showed that welders are exposed to health risks. Preventive measures should be applied in welding workplaces to reduce the concentrations of metal fumes., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Welding operations are widely present in the manufacturing production process, involving a large number of occupational groups, and are the key occupations where work injuries and occupational diseases occur in China. For different welding processes and welding materials, the content and focus of occupational health monitoring are different. At present, the item of occupational health examination in welding operation is in poor consistency with the on-site exposure of occupational hazard factors, and it is mainly concentrated in the stage of disease development, which can not reflect the early health damage caused by welding dust exposure in time. The emergence of biomarkers of welding dust can make up for this defect. Therefore, it is of great significance to describe the current situation of occupational health monitoring of welding dust and summarize the research progress of related biomarkers for the early prevention of diseases caused by welding dust and the practice of occupational health monitoring.

Objectives: There are some studies reporting the association between (manganese [Mn]) exposure to welding fume and neurological dysfunction. This study examined the relationship between Mn exposure and neurological behavior in Japanese male welders and non-welders using biological samples, which to date has not been assessed in Japan., Methods: A total of 94 male welders and 95 male non-welders who worked in the same factories were recruited. The blood and urine samples were obtained from all the participants to measure Mn exposure levels. Neurological function tests were also conducted with all participants. The sampling of the breathing air zone using a personal sampler was measured for welders only., Results: The odds ratios (ORs) for the Working Memory Index (WMI) scores were significantly higher among all participants in the low blood Mn concentration group than those in the high blood Mn concentration group (OR, 2.77; 95% confidence interval [CI], 1.24, 6.19; P = .013). The association of WMI scores and blood Mn levels in welders had the highest OR (OR, 3.73; 95% CI, 1.04, 13.38; P = .043). Although not statistically significant, a mild relationship between WMI scores and blood Mn levels was observed in non-welders (OR, 2.09; 95% CI, 0.63, 6.94; P = .227)., Conclusions: The results revealed a significant positive relationship between blood Mn and neurological dysfunction in welders. Furthermore, non-welders at the same factories may be secondarily exposed to welding fumes. Further research is needed to clarify this possibility., (© 2023 The Authors. Journal of Occupational Health published by John Wiley & Sons Australia, Ltd on behalf of The Japan Society for Occupational Health.)

As a by-product or material used in various industries crystalline silica contaminates the air many occupational settings. If its fine particles are inhaled, they are deposited in the lungs and may cause the development of silicosis, chronic obstructive pulmonary disease, and lung cancer. The goal of this study was to estimate occupational exposure to respirable crystalline silica (RCS) in Slovenia and the associated health risks. To do that, we ran two cross-sectional studies, one to determine the number of workers at risk of occupational exposure to RCS in Slovene industries and the other to determine and classify changes in the lung radiographs of glass factory workers exposed to RCS, as a means to infer health risks for other RCS exposed workers in Slovenia. However, the first study shows that official public data on occupational exposure to silica in Slovenia are unreliable and incomplete and that company representatives strongly underestimate occupational exposure to silica. Measurements of total and silica dust are made by 8.3 % and 1.8 % of companies working with silica, respectively. The second study shows that about a third of the exposed workers had lung changes associated with silicosis. We have failed to achieve the goal of our study, as the obtained data are grossly underestimated and unreliable, but it has opened our eyes as to what needs to be improved. All companies need to systematically be informed about occupational health risks, field inspections need to be consistent, regular, and intensified, and health surveillance of all exposed workers implemented regularly., (© 2022 Andrea Margan, Dominika Verlak, Gregor Roj, and Metoda Dodič Fikfak, published by Sciendo.)

We investigated the association between exposure to welding fumes and the risk of biliary tract, male breast, bone, and thymus cancer, as well as cancer of the small intestine, eye melanoma, and mycosis fungoides, among men in a European, multicenter case-control study. From 1995-1997, 644 cases and 1,959 control subjects from 7 countries were studied with respect to information on welding and potential confounders. We linked the welding histories of the participants with a measurement-based exposure matrix to calculate lifetime exposure to welding fumes. Odds ratios (ORs) and 95% confidence intervals (CIs) were estimated using logistic regression models, conditional on country and 5-year age groups, and adjusted for education and relevant confounders. Regular welding was associated with an increased risk of cancer of the small intestine (OR = 2.30, 95% CI: 1.17, 4.50). Lifetime exposure to welding fumes above the median of exposed controls was associated with an increased risk of cancer of the small intestine (OR = 2.00, 95% CI: 1.07, 3.72) and male breast (OR = 2.07, 95% CI: 1.14, 3.77), and some elevation in risk was apparent for bone cancer (OR = 1.92, 95% CI: 0.85, 4.34) with increasing lifetime exposure to welding fumes. Welding fumes could contribute to an increased risk of some rare cancers., (© The Author(s) 2022. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Introduction: The aim of this study was to investigate exposure to dust, and metal fumes, changes in pulmonary function indices among industrial workers to estimate the carcinogenic and non-carcinogenic risk of exposure to occupational metal fume., , Methods: This cross-sectional study was performed on 98 workers exposed to metal fumes. Air sampling was performed according to the NIOSH 0500 method and was analyzed by gravimetry and metal levels were analyzed by atomic absorption spectrometry. Spirometric results for 2010-2016 were collected. Carcinogenic and non-carcinogenic risk assessments were performed according to the US Environmental Protection Agency guidelines. Data were analyzed by SPSS 20 software., Results: The mean occupational exposure of the subjects to workplace dust and iron fumes was 15.95 ± 6.65 mg/m3 and 13.18 ± 3.06 mg/m3 respectively. During these 6 years, the FVC (P=0.04), PEFR (P=0.04), and FEV1 (P=0.03) indices decreased significantly among welders, but there was no significant difference between FEV1/ FVC indexes. Also, the mean of FEV1 and PEFR decreased significantly amongst casting workers, but FVC and FEV1/ FVC had no significant difference. Multivariate regression showed that in both jobs, BMI and work history were related to pulmonary function indices. The mean total excess ifetime carcinogenic risk (ELCR) of hexavalent chromium in the study population was 0.708 per 1000 people and the mean non-carcinogenic risk of hexavalent chromium was HQ = 19.62., Conclusions: The results showed that exposure to metal fumes in casting and welding jobs reduces pulmonary function indices. Although the average occupational exposure to hexavalent chromium is lower than the recommended limit and the risk of carcinogenesis is within an acceptable range, the risk of non-carcinogenic effects among workers is significant Therefore, it is important to prevent this problem, by adequate ventilation and using respiratory masks.

Exposure to chemicals and particles generated in automotive repair shops is a common and underestimated problem. The objective of this study was to assess the genotoxic status of auto repair workers with (1) a questionnaire to gather sociodemographic information and self-reported exposure to hazardous chemicals and (2) measurement of various biochemical parameters. Blood and oral mucosa samples were collected from 174 male volunteers from Barranquilla, Colombia, aged 18-55 years: 87 were active car repairmen and 87 were individuals with no known exposure to hazardous chemicals. Peripheral blood lymphocytes were collected for the comet and cytokinesis-blocking micronucleus (CBMN) assays, while oral mucosal epithelium extracted to quantify micronucleated cells (MNC). DNA was extracted to assess polymorphisms in the DNA repair ( XRCC1 ) and metabolism-related genes ( GSTT1 and GSTM1 ) using PCR-RFLP. DNA damage and frequency of micronuclei (MN) in lymphocytes and oral mucosa were significantly higher in exposed compared to control group. In both groups genotypes and allelic variants for XRCC1 and GSTT1 met the Hardy-Weinberg equilibrium (HWE). In contrast, GSTM1 deviated from HWE. In the exposed group genotypic variants were not correlated with DNA damage or MN presence in cells. DNA damage and occurrence of MN in mucosa and lymphocytes correlated with age and time of service (occupational exposure ≥ 3 years). In summary, workers in car repair shops exhibited genotoxic effects depending upon exposure duration in the workplace which occurred independent of DNA repair XRCC1 gene and metabolism genes GSTT1 and GSTM1 . Date demonstrate that health authorities improve air quality in auto repair facilities to avoid occupational DNA damage.

The aim of our study was to evaluate the association between levels of blood and urinary cadmium and lipid balance in a group of outdoor workers. The study was conducted on a group of 146 individuals (average age 45,1 ± 8,5). Blood and urinary samples were collected for the detection of total cholesterol, HDL cholesterol, LDL cholesterol, triglycerides, blood cadmium and urinary cadmium. We divided the group of workers into two subgroups according to the task:75 traffic policemen and 71 police drivers. Gender differences were found. The Pearson correlation coefficient showed a positive association between blood and urinary cadmium levels and total cholesterol, LDL and triglycerides levels. Total cholesterol, LDL cholesterol and triglycerides were significantly higher in the group of traffic policemen than in police drivers. In conclusion, the results suggest a statistically significant association between blood and urinary cadmium levels and lipid balance contributing to an increase of the cardiovascular risk., (Copyright © 2022. Published by Elsevier B.V.)

This study aims to assess the metal fume exposure of welders and to determine exposure rates for similar exposure groups in a shipyard through the use of Near-field/Far-field (NF/FF) mathematical model and Bayesian decision analysis (BDA) technique. Emission rates of various metal fumes (i.e., total chromium (Cr), iron (Fe), lead (Pb), manganese (Mn), and nickel (Ni)) were experimentally determined for the gas metal arc welding and flux cored arc welding processes, which are commonly used in shipyards. Then the NF/FF field model which used the emission rates were further validated by welding simulation experiment, and together with long-term operation condition data obtained from the investigated shipyard, the predicted long-term exposure concentrations of workers was established and used as the prior distribution in the BDA. Along with the field monitoring metal fume concentrations which served as the likelihood distribution, the posterior decision distributions in the BDA were determined and used to assess workers' long-term metal exposures. Results show that the predicted exposure concentrations (C p ) and the field worker's exposure concentrations (C m ) were statistically correlated, and the high R 2 (= 0.81-0.94) indicates that the proposed surrogate predicting method by the NF and FF model was adequate for predicting metal fume concentrations. The consistency in both prior and likelihood distributions suggests the resultant posterior would be more feasible to assess workers' long-term exposures. Welders' Fe, Mn and Pb exposures were found to exceed their corresponding action levels with a high probability (= 54%), indicating preventive measures should be taken immediately. The proposed approach provides a universal solution for conducting exposure assessment with usual limited number of personal exposure data., (© 2022. The Author(s).)

The isocyanate monomer 1,6-hexamethylene diisocyanate (HDI) and one of its trimers, HDI isocyanurate, are airway and skin sensitizers contained in polyurethane paint. The toxic response of cultured skin cells to these compounds was measured by evaluating the isocyanate concentrations at which 50% of the cells die (i.e., lethal concentration 50%, LC 50 ) because the relative toxicity of each form of HDI should be considered when exposure limits of HDI-based paints are set. By using a luminescent ATP-viability assay, we compared the cytotoxic effects of HDI monomer and HDI isocyanurate on cultured human skin cells (keratinocytes, fibroblasts, and melanocytes) after 4-h isocyanate exposures using culture media with varying levels of nutrients in order to also determine the effects of media composition on isocyanate toxicity. Before analysis, experimental wells were normalized to controls containing cells that were cultured with the same vehicle and media. The measured mean LC 50 values ranged from 5 to 200 µM across the experimental conditions, in which HDI isocyanurate in protein-devoid media was the most toxic to cells, producing the lowest LC 50 values. For HDI monomer, keratinocytes were the most resistant to its toxicity and melanocytes were the most susceptible. However, when exposed to HDI isocyanurate, the opposite was observed, with melanocytes being the most resilient and the keratinocytes and fibroblasts were more susceptible. Depending on the type of skin cells, dose-response data indicated that HDI isocyanurate was 2-6 times more toxic than HDI monomer when using protein-devoid media whereas HDI isocyanurate was 4-13 times more toxic than HDI monomer when protein-rich media was used. Therefore, if the protein-devoid saline medium alone were used for these experiments, then a significant under-estimation of their relative toxicities in protein-rich environments would have resulted. This difference is because HDI monomer toxicity was more attenuated by the presence of protein in the culture media than HDI isocyanurate toxicity. Thus, conclusions based on comparative toxicity studies and consequent inference applied to potential human toxicity can be affected by in vitro culture media conditions. The physiochemical difference in reactivity of the two forms of HDI to biological molecules most likely explains the observed toxicity differences and may have implications for skin penetration, adverse effects like skin sensitization, and systemic responses like asthma. Future studies are warranted to investigate differences in the biological availability, cellular toxicity, and immunologic sensitization mechanisms for HDI monomer and HDI isocyanurate., (© 2021. The Author(s).)

Objective: This study assessed the associations between blood and urine levels of toxic metals; cadmium (Cd) and lead (Pb), and methylation levels of the LINE-1 gene among e-waste and control populations in Ghana., Methods: The study enrolled 100 male e-waste workers and 51 all-male non-e-waste workers or controls. The concentrations of Cd and Pb were measured in blood and urine using inductively coupled plasma mass spectrometry, while LINE1 methylation levels were assessed by pyrosequencing of bisulfite-converted DNA extracted from whole blood. Single and multiple metals linear regression models were used to determine the associations between metals and LINE1 DNA methylation., Results: Blood lead (BPb) and urine lead (UPb) showed higher median concentrations among the e-waste workers than the controls (76.82 µg/L vs 40.25 µg/L, p ≤ 0.001; and 6.89 µg/L vs 3.43 µg/L, p ≤ 0.001, respectively), whereas blood cadmium (BCd) concentration was lower in the e-waste workers compared to the controls (0.59 µg/L vs 0.81 µg/L, respectively, p = 0.003). There was no significant difference in LINE1 methylation between the e-waste and controls (85.16 ± 1.32% vs 85.17 ± 1.11%, p = 0.950). In our single metal linear regression models, BPb was significantly inversely associated with LINE1 methylation in the control group (β BPb  = - 0.027, 95% CI - 0.045, - 0.010, p = 0.003). In addition, a weak association between BPb and LINE1 was observed in the multiple metals analysis in the e-waste worker group (β BPb  = - 0.005, 95% CI - 0.011, 0.000, p = 0.058)., Conclusion: Continuous Pb exposure may interfere with LINE1 methylation, leading to epigenetic alterations, thus serving as an early epigenetic marker for future adverse health outcomes., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

With an estimated worldwide volume of 266 million surgeries in 2015, the call for general inhalation anesthesia is considerable. However, widely used volatile anesthetics such as N2O and the highly fluorinated gases sevoflurane, desflurane, and isoflurane are greenhouse gases, ozone-depleting agents, or both. Because these agents undergo minimal metabolism in the body during clinical use and are primarily (≥95%) eliminated unchanged via exhalation, waste anesthetic gases (WAGs) in operating rooms and postanesthesia care units can pose a challenge for overall elimination and occupational exposure. The chemical properties and global warming impacts of these gases vary, with atmospheric lifetimes of 1-5 years for sevoflurane, 3-6 years for isoflurane, 9-21 years for desflurane, and 114 years for N2O. Additionally, the use of N2O as a carrier gas for the inhalation anesthetics and as a supplement to intravenous (IV) anesthetics further contributes to these impacts. At the same time, unscavenged WAGs can result in chronic occupational exposure of health care workers to potential associated adverse health effects. Few adverse effects associated with WAGs have been documented, however, when workplace exposure limits are implemented. Specific measures that can help reduce occupational exposure and the environmental impact of inhaled anesthetics include efficient ventilation and scavenging systems, regular monitoring of airborne concentrations of waste gases to remain below recommended limits, ensuring that anesthesia equipment is well maintained, avoiding desflurane and N2O if possible, and minimizing fresh gas flow rates (eg, use of low-flow anesthesia). One alternative to volatile anesthetics may be total intravenous anesthesia (TIVA). While TIVA is not associated with the risks of occupational exposure or atmospheric pollution that are inherent to volatile anesthetic gases, clinical considerations should be weighed in the choice of agent. Appropriate procedures for the disposal of IV anesthetics must be followed to minimize any potential for negative environmental effects. Overall, although their contributions are relatively low compared with those of other human-produced substances, inhaled anesthetics are intrinsically potent greenhouse gases and pose a risk to operating-room personnel if not properly managed and scavenged. Factors to reduce waste and minimize the future impact of these substances should be considered., Competing Interests: Conflicts of Interest: See Disclosures at the end of the article., (Copyright © 2021 The Author(s). Published by Wolters Kluwer Health, Inc on behalf of the International Anesthesia Research Society.)

Background: Work exposures play a significant role in adult-onset asthma, but the mechanisms of work-related asthma are not fully elucidated., Objective: We aimed to reveal the molecular mechanisms of work-related asthma associated with exposure to flour (flour asthma), isocyanate (isocyanate asthma), or welding fumes (welding asthma) and identify potential biomarkers that distinguish these groups from each other., Methods: We used a combination of clinical tests, transcriptomic analysis, and associated pathway analyses to investigate the underlying disease mechanisms of the blood immune cells and the airway epithelium of 61 men., Results: Compared with the healthy controls, the welding asthma patients had more differentially expressed genes than the flour asthma and isocyanate asthma patients, both in the airway epithelia and in the blood immune cells. In the airway epithelia, active inflammation was detected only in welding asthma patients. In contrast, many differentially expressed genes were detected in blood cells in all 3 asthma groups. Disease-related immune functions in blood cells, including leukocyte migration and inflammatory responses, and decreased expression of upstream cytokines such as TNF and IFN-γ were suppressed in all the asthma groups. In transcriptome-phenotype correlations, hyperresponsiveness (R ∼ |0.6|) had the highest clinical relevance and was associated with a set of exposure group-specific genes. Finally, biomarker subsets of only 5 genes specifically distinguished each of the asthma exposure groups., Conclusions: This study provides novel data on the molecular mechanisms underlying work-related asthma. We identified a set of 5 promising biomarkers in asthma related to flour, isocyanate, and welding fume exposure to be tested and clinically validated in future studies., (Copyright © 2021 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.)

Urinary mutagenicity reflects systemic exposure to complex mixtures of genotoxic/carcinogenic agents and is linked to tumor development. Coal combustion emissions (CCE) and diesel engine exhaust (DEE) are associated with cancers of the lung and other sites, but their influence on urinary mutagenicity is unclear. We investigated associations between exposure to CCE or DEE and urinary mutagenicity. In two separate cross-sectional studies of nonsmokers, organic extracts of urine were evaluated for mutagenicity levels using strain YG1041 in the Salmonella (Ames) mutagenicity assay. First, we compared levels among 10 female bituminous (smoky) coal users from Laibin, Xuanwei, China, and 10 female anthracite (smokeless) coal users. We estimated exposure-response relationships using indoor air concentrations of two carcinogens in CCE relevant to lung cancer, 5-methylchrysene (5MC), and benzo[a]pyrene (B[a]P). Second, we compared levels among 20 highly exposed male diesel factory workers and 15 unexposed male controls; we evaluated exposure-response relationships using elemental carbon (EC) as a DEE-surrogate. Age-adjusted linear regression was used to estimate associations. Laibin smoky coal users had significantly higher average urinary mutagenicity levels compared to smokeless coal users (28.4 ± 14.0 SD vs. 0.9 ± 2.8 SD rev/ml-eq, p = 2 × 10 -5 ) and a significant exposure-response relationship with 5MC (p = 7 × 10 -4 ). DEE-exposed workers had significantly higher urinary mutagenicity levels compared to unexposed controls (13.0 ± 10.1 SD vs. 5.6 ± 4.4 SD rev/ml-eq, p = .02) and a significant exposure-response relationship with EC (p-trend = 2 × 10 -3 ). Exposure to CCE and DEE is associated with urinary mutagenicity, suggesting systemic exposure to mutagens, potentially contributing to cancer risk and development at various sites., (© 2021 Environmental Mutagen Society. This article has been contributed to by US Government employees and their work is in the public domain in the USA.)

Background: International Labour Organization (ILO) report indicates more than 2.4 million workers die from work-related diseases and accidents each year. Work-related respiratory ailments related to airborne particulate matter such as flour dust are responsible for about 386,000 deaths and 6.6 million illness-adjusted life years. Even though exposure to flour dust together with the extreme expansions of flour mill sectors is a priority health concern, extent of the problem is little investigated in Ethiopia. The aim of this study was to evaluate the magnitude and risk factors of work-related respiratory symptoms among flour mill workers in Bahir Dar City, Ethiopia., Methods: This study employed a comparative cross-sectional survey of 560 samples (280 exposed group from flour mill workers and 280 unexposed group from office workers) with a stratified random sampling technique. The study was conducted from March to April 2019 in Bahir Dar City, Northwest Ethiopia. We used the British Medical Research Council (BMRC) questionnaire to assess work-related respiratory symptoms. The questionnaire was pretested and interview administered to collect data. Binary logistic regression analysis was fitted to evaluate significant factors of respiratory symptoms at a < 0.05 p value. Adjusted odds ratio (AOR) with a confidence interval (CI) of 95% was calculated to determine a strength of association., Results: All the sampled participants had fully responded to the interview. The median age of exposed and unexposed groups was 28.5 interquartile range (IQR, 20) and 31 (IQR, 15) years, respectively. The prevalence of work-related respiratory symptoms among flour mill workers was substantially higher than that of among controls, 63.9% and 20.7%, respectively (Χ 2 = 107.11; p < 0.0001). Chest illness among flour mill workers was higher, 43.6% (N = 122) compared to that of among control group, 7.9% (N = 22) followed by dyspnea, 33.6% (N = 94) versus 2.5% (N = 7) among flour mill workers and control group, respectively. Age > 35 years [AOR, 2.03; 95% CI (1.34, 5.48), having no education [AOR, 1.54; 95% CI (1.28, 3.06)], work set up with inadequate ventilation [AOR, 2.05; 95% CI (1.18, 3.56)], work experience > 5 years [AOR, 1.89; 95% CI (1.23, 4.67)] and having no training in safety [AOR, 2.45; 95% CI (1.45, 4.76)] significantly affected the experience of respiratory symptoms among flour mill workers whereas age [AOR, 1.79; 95% CI (1.06, 3.04)], monthly salary [AOR, 1.98; 95% CI (1.04, 3.78)] and exposure status [AOR, 5.18; 95% CI (3.34, 8.04)] were detected to be significant factors of respiratory symptoms in the exposed and the unexposed combined model., Conclusion: Respiratory symptoms emanating from exposure to various flour dusts were significantly higher among flour mill workers than among the control group. Therefore, we recommend the need to effectively implement health and safety programs that account for the reduction of dust at a source, use of engineering controls (e.g., provision of adequate ventilation systems), use of administrative measures (e.g., training program and health surveillance) and provision of a suitable personal protective equipment (PPE). Furthermore, it is vital to integrate workplace health and safety programs to the wider public health policies and strategies to effectively mitigate the burden of work-related respiratory conditions. We also encourage future studies to evaluate concentration of flour dusts combined with physical examinations to establish plausible associations of respiratory symptoms with dusts of flour mill-related origin., (© 2021. The Author(s).)

Laparoscopic surgery has been undermined throughout the COVID-19 pandemic by concerns that it may generate an infectious risk to the operating team through aerosolization of peritoneal particles. There is anyway a need for increased awareness and understanding of the occupational hazard for surgical teams regarding unfiltered escape of pollutants generated by surgical smoke and other microbials. Here, the aerosol-generating nature of this access modality was confirmed through repeatable real-time methodology both qualitatively and quantitively to inform best practice and additional engineering solutions to optimize the operating room environment., (© The Author(s) 2021. Published by Oxford University Press on behalf of BJS Society Ltd.)

Air force ground crew personnel are potentially exposed to fuels and lubricants, as raw materials, vapours and combustion exhaust emissions, during operation and maintenance of aircrafts. This study investigated exposure levels and biomarkers of effects for employees at a Danish air force military base. We enrolled self-reported healthy and non-smoking employees (n = 79) and grouped them by exposure based on job function, considered to be potentially exposed (aircraft engineers, crew chiefs, fuel operators and munition specialists) or as reference group with minimal occupational exposure (avionics and office workers). We measured exposure levels to polycyclic aromatic hydrocarbons (PAHs) and organophosphate esters (OPEs) by silicone bands and skin wipes (PAHs only) as well as urinary excretion of PAH metabolites (OH-PAHs). Additionally, we assessed exposure levels of ultrafine particles (UFPs) in the breathing zone for specific job functions. As biomarkers of effect, we assessed lung function, plasma levels of acute phase inflammatory markers, and genetic damage levels in peripheral blood cells. Exposure levels of total PAHs, OPEs and OH-PAHs did not differ between exposure groups or job functions, with low correlations between PAHs in different matrices. Among the measured job functions, the UFP levels were higher for the crew chiefs. The exposure level of the PAH fluorene was significantly higher for the exposed group than the reference group (15.9 ± 23.7 ng/g per 24 h vs 5.28 ± 7.87 ng/g per 24 h, p = 0.007), as was the OPE triphenyl phosphate (305 ± 606 vs 19.7 ± 33.8 ng/g per 24 h, p = 0.011). The OPE tris(1,3-dichlor-2-propyl)phosphate had a higher mean in the exposed group (60.7 ± 135 ng/g per 24 h) compared to the reference group (8.89 ± 15.7 ng/g per 24 h) but did not reach significance. No evidence of effects for biomarkers of systemic inflammation, genetic damage or lung function was found. Overall, our biomonitoring study show limited evidence of occupational exposure of air force ground crew personnel to UFPs, PAHs and OPEs. Furthermore, the OH-PAHs and the assessed biomarkers of early biological effects did not differ between exposed and reference groups., (© 2021. The Author(s).)