Search

Purpose: To characterize the time structure of K1 kickboxing matches of Glory World Series (Glory) and to determine potential differences between winners and losers. Methods: Seventeen matches of Glory 2019 (17 first rounds, 13 second rounds, and 8 third rounds) were video-analyzed to quantify (1) the time expended in high- and low-intensity activity and pauses, (2) the number and pattern of attacks, and (3) the number of effective attacks. Fighters were professional male athletes (age 27.9 [2.7] y) of the middle-weight category (85 kg). The number and the pattern of attacks and the number of effective attacks were compared between winners and losers. Results: The mean times expended in high- and low-intensity activity and pauses were 234.6 (133.9) seconds, 97.4 (60.1) seconds, and 36.0 (19.9) seconds, respectively, resulting in an effort-to-pause ratio of ∼1.8:1. Compared with losers, winners presented (1) a greater number of attacks in the second round (P =.004) and entire match (P =.009), (2) a greater number of attacks containing 3 attacks in sequence in the second round (P =.001) and attacks containing >3 attacks in the third round (P =.049), and (3) a greater number of effective attacks in the second round (P =.011) and entire match (P =.008). Conclusions: The findings of the present study indicate that K1 kickboxing in Glory matches presents a ∼1.8:1 effort-to-pause ratio and that winners perform more attacks, effective attacks, and attacks in sequence. These data provide useful insights to improve the training specificity of kickboxing athletes. [ABSTRACT FROM AUTHOR]

Purpose: To compare the kinematic profile of 2 underwater pullout breaststroke techniques. Methods: Sixteen swimmers (9 men, 20.67 [2.71] y old; 7 women, 18.86 [0.83] y old) performed 3 × 25-m breaststroke using 2 pullout breaststroke techniques: Fly-Kick first and Combined. A speedometer was used to assess the peak and the mean velocity during the glide, propulsion, and recovery phases of both techniques, as well as for the total underwater sequence. The underwater distance was retrieved from video footage and was considered for each pullout technique. The range of motion of the knee during the fly-kick was also retrieved, and the time to complete the 25 m was considered the performance outcome, accompanied by the mean velocity, stroke rate, stroke length, and stroke index. Results: Velocity–time series showed different profiles between pullout techniques (P ≤.05) mostly in the glide and propulsion phases for males and females, respectively. The mean velocity of 25 m was shown to be greater in females when using the Fly-Kick first technique (P =.05, d = 0.36). Greater values in total underwater distance and knee range of motion were also observed for this technique in both cohorts. Conclusions: Female swimmers presented a higher performance when using the Fly-Kick first technique. Different kinematic profiles arise when swimmers use different underwater pullout techniques where the Fly-Kick first may allow them to reach higher kinematical standard. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to enhance the understanding of soccer match peak demands by describing worst-case scenario (WCS) and time spent above 80% and 90% of the WCS for total distance (TD) and high-speed running (HSR). The investigation considered playing level (first team vs under-19 [U19] team) and playing position (center backs, fullbacks, midfielders, and forwards) to assess how WCS and the time spent above specific thresholds vary across different populations. Methods: Data from 31 players in a professional Italian soccer club were collected during the 2022–23 season. Microtechnology devices tracked physical activity during matches. Players were categorized by position, and WCS was determined using rolling averages over a 1-minute period. Time spent above 80% and 90% of WCS for TD and HSR was calculated. Results: The U19 team exhibited higher HSR WCS compared with the first team (∼63 m·min−1 vs ∼56 m·min−1). Midfielders recorded the highest TD WCS (∼208 m·min−1), and forwards exhibited the highest HSR WCS (∼70 m·min−1). The first team spent significantly more time above 80% (∼6 min) and 90% (∼1 min) of TD WCS. Midfielders spent significantly more time above the 80% (∼7 min) of TD WCS, while forwards above the 80% (∼2 min) of HSR WCS. Conclusions: The study emphasizes that WCS used alone may not sufficiently capture real match intensity. Considering the time spent above specific thresholds provides additional insights (ie, between-levels differences and position). Practitioners should consider both WCS and time spent above thresholds for individualized training prescriptions, reflecting differences in playing roles. [ABSTRACT FROM AUTHOR]

The precise measurement of temperature is crucial in various fields such as biology, medicine, industrial automation, energy management, and daily life applications. While in most scenarios, sensors with a fixed thermal conductivity inevitably mismatch the analogous parameter of the medium being measured, thus causing the distortion and inaccurate detection of original temperature fields. Despite recent efforts on addressing the parameter-mismatch issue, all current solutions are constrained to a fixed working medium, whereas a more universal sensor should function in a variety of scenes. Here, we report a dynamic and reconfigurable thermal sensor capable of highly accurate measurements in diverse working environments. Remarkably, thanks to the highly tunable thermal conductivity of the expanded-plane structure, this sensor works effectively on background mediums with a wide range of conductivity. Such a development greatly enhances the robustness and adaptability of thermal sensors, setting a solid foundation for applications in multi-physical sensing scenarios. [ABSTRACT FROM AUTHOR]

A correction to the article "Match Running Performance in Australian Football is Related to Muscle Fiber Typology" that was published in the October 10, 2023 online issue is presented.

The aim of this investigation was to quantify professional rugby union player activity profiles after the most intense (peak) passages of matches. Movement data were collected from 30 elite and 30 subelite professional rugby union athletes across respective competitive seasons. Accelerometer-derived PlayerLoad and global navigation satellite system–derived measures of mean speed and metabolic power were analyzed using a rolling-average method to identify the most intense 5- to 600-second passages (ie, worst-case scenarios) within matches. Player activity profiles immediately post their peak 5- to 600-second match intensity were identified using 5 epoch duration-matched intervals. Mean speed, metabolic power, and PlayerLoad declined sharply (∼29%–86%) after the most intense 5 to 600 seconds of matches. Following the most intense periods of rugby matches, exercise intensity declined below the average match-half intensity 81% of the time and seldom returned to or exceeded it, likely due to a host of individual physical and physiological characteristics, transient and/or accumulative fatigue, contextual factors, and pacing strategies. Typically, player exercise intensities after the most intense passages of matches were similar between match halves, positional groups, and levels of rugby competition. Accurate identification of the peak exercise intensities of matches and movement thereafter using novel methodologies has improved the limited understanding of professional rugby union player activity profiles following the worst-case scenarios of matches. Findings of the present study may inform match-representative training prescription, monitoring, and tactical match decisions (eg, substitutions and positional changes). [ABSTRACT FROM AUTHOR]

During the shooting motion of a basketball, the path of the ball from the beginning of the lift to release follows an S-shaped trajectory. This study is the first to investigate how two distinctive features of the S-shaped ball path, the maximum curvature, κmax, and terminal curvature, σ, are associated with longitudinal accuracy. The sagittal plane ball path and curvature were found using Bezier curves for 31 professional male basketball athletes. Terminal release curvature had a very strong positive correlation to intra-individual release velocity standard deviation (r = 0.73, p < 0.001) indicating that shooters with straighter terminal ball paths had better longitudinal shooting accuracy. It was also observed that κmax coincided with the transition to the forward shooting motion and that players with higher κmax tend to have a clear two-part shooting style rather than a single fluid motion. A comparison between groups of good and poor shooters identified a mean difference in κmax of 7.9 m−1 (p < 0.001, 95% CI: 11.8–4.0 m−1) suggesting that good shooters typically have a higher κmax than poor shooters. [ABSTRACT FROM AUTHOR]

Conventional low-pass filtering of 3D motion capture signals prior to estimating knee joint moments and ACL injury risk has known limitations. This study aimed to evaluate the fractional Fourier filter (FrFF), which employs a time-varying cut-off frequency, for assessing peak knee moments during common ACL injury risk screening tasks. Ground reaction force and motion data were collected from 23 team sport athletes performing 45° unanticipated sidesteps and drop jumps. Peak knee abduction, internal rotation and non-sagittal moments were estimated using inverse dynamics after five different low-pass filter approaches were applied (FrFF vs. four variations of a fourth-order Butterworth filter). The FrFF produced peak knee moments larger than "matched" (i.e. force and motion cut-off frequencies were equivalent) and closer to "unmatched" (i.e. force and motion cut-offs were different) Butterworth filter approaches and removed problems with representing foot-to-ground impact peaks. Participants with larger peak moments were identified as "at risk" of injury irrespective of filter approach, but the FrFF identified "at risk" classifications conventional approaches did not. Preliminary evidence suggests that the FrFF displays enhanced sensitivity to movement strategies that induce high knee loads. This was most evident for sidestepping, with more research warranted to optimise the FrFF for drop jumps. [ABSTRACT FROM AUTHOR]

Background: Triglyceride–glucose (TyG) index, as an effective surrogate marker of insulin resistance, has shown predictive value in the risk of heart failure in patients with coronary artery disease (CAD). This study aims to investigate the correlation between TyG index and myocardial work measurements in CAD, and to explore its role in detecting early subclinical cardiac dysfunction. Methods: This cross-sectional study included 267 patients diagnosed with CAD and excluding left ventricular myocardial dysfunction in Beijing Hospital. Participants were divided into two groups according to the TyG index level, and myocardial work measurements were compared between groups. The correlation was explored between gradually increased TyG index and subclinical myocardial function in CAD patients. Results: We observed that TyG index was significantly correlated with the global waste work (GWW), and the value of GWW increased progressively with the elevation of TyG index. After adjusting for the effects of confounding factors, TyG index was still independently associated with GWW. Conclusion: An elevated TyG index was independently correlated with early subclinical myocardial dysfunction in CAD patients. Our study demonstrated that the strict control of TyG index may be conducive to forestall the progression of clinical heart failure in CAD patients. [ABSTRACT FROM AUTHOR]

Background: Nurse staffing levels are increasingly challenged while pressures on healthcare systems are rising. There is a clear need to optimise efficiency in healthcare delivery in order to deliver safe, effective and quality health care. Aim: To understand how nurses working shifts spend their time and explore opportunities to improve efficiency in care delivery. Method: A time-motion study was conducted on three acute care wards in a district general hospital in West Wales; 13 nurses were observed over 14 shifts, each activity undertaken was recorded in real time. Findings: In all, 109 hours were observed. Approximately half of nurses' time is spent delivering direct patient care, with medications administration taking the majority of time. Conclusion: A number of recommendations are made involving processes and workforce modelling with the aim of improving efficiency and safety. Further research would be required to assess the impact of their introduction. [ABSTRACT FROM AUTHOR]

Federated learning (FL) is a novel decentralized machine learning framework that differs from traditional centralized machine learning. It enables multiple participants to collaborate on training models without sharing raw data directly. Participants train the local model with their data and only upload the model parameters. To achieve a fair allocation of benefits by the common global model, a standard is needed to evaluate each model providers' contribution to federated learning. Shapley value is a classic concept from cooperative game theory and is often used in data evaluation for machine learning. This study introduces the Shapley value in privacy-preserving federated learning (PPFL) to construct a contribution measuring module for measuring the contribution of each model provider to the learning task and propose a verification mechanism for the contribution results. Compared to the other related works for contribution measurement by Shapley value, this work achieves higher privacy protection, where local participants' data sets, local model parameters, and global model parameters are concealed. In addition, the verification of the fairness of contribution measurement is also supported. Moreover, this work achieves the access control of aggregated global models through the concept of threshold identity-based encryption, where model consumers can only gain access to the specific aggregated global model if they are authorized by sufficient model providers. [ABSTRACT FROM AUTHOR]

Periapical radiography is a regular radiographic procedure performed by dentists. However, at times, it may not be possible to position the image receptor into a patient's mouth in an optimized or practical way. For these cases, some dentists advocated the use of extraoral periapical radiography (EOPA). This literature review aimed to review the dental literature on the use of EOPA. In October 2023, PubMed, Web of Science, and Scopus were searched to identify papers that reported on the use of EOPA, supplemented by manual reference tracing and Google Scholar searches. After screening, 18 papers published between 2003 and 2022 were identified, including 14 original articles and 4 reviews. From very limited and conflicting evidence, it was found that root length/working length measurements between EOPA and IOPA did not significantly differ or EOPA showed inferiority. No data were available to compare EOPA with other extraoral modalities such as panoramic radiography. The technique used in EOPA to visualize posterior teeth in the maxilla and mandible varied across studies, such as the vertical angulation of the primary beam, whether mouth should be opened or closed, and whether a holder should be used or not. At the current time, EOPA probably should not be advocated for regular use. [ABSTRACT FROM AUTHOR]

Network reconnaissance and measurements play a central role in improving Internet security and are important for understanding the current deployments and trends. Such measurements often require coordination with the measured target. This limits the scalability and the coverage of the existing proposals. IP Identification (IPID) provides a side channel for remote measurements without requiring the targets to install agents or visit the measurement infrastructure. However, current IPID-based techniques have technical limitations due to their reliance on the idealistic assumption of stable IPID changes or prior knowledge, making them challenging to adopt for practical measurements. In this work, we aim to tackle the limitations of existing techniques by introducing a novel approach: predictive analysis of IPID counter behavior. This involves utilizing a machine learning (ML) model to understand the historical patterns of IPID counter changes and predict future IPID values. To validate our approach, we implement six ML models and evaluate them on realistic IPID data collected from 4,698 Internet sources. Our evaluations demonstrate that among the six models, the Gaussian Process (GP) model has superior accuracy in tracking and predicting IPID values. Using the GP-based predictive analysis, we implement a tool, called ZPredict, to infer various favorable information about target networks or servers. Our evaluation on a large dataset of public servers demonstrates its effectiveness in idle port scanning, measuring Russian censorship, and inferring Source Address Validation. Our study methodology is ethical and was developed to mitigate any potential harm, taking into account the concerns associated with measurements. [ABSTRACT FROM AUTHOR]

Liquid jet in crossflow tunnel has widespread applications in various industrial devices, with the measurements of liquid film on the bottom surface pivotal in exploring relevant mechanisms such as heat transfer and film breakup. This work reports the measurements of liquid film on the bottom surface of a crossflow tunnel using the brightness-based laser induced fluorescence method under different flow conditions at ambient pressure and temperature. Film breakup phenomena are observed downstream within the tunnel. Employing the shadowgraph method, two distinct patterns of film breakup associated with the droplet impingement positions on the film wave are identified, i.e. bag breakup and membrane breakup. The film thickness is subsequently calculated, and jet impingement and spray impingement of injected liquid on tunnel bottom surface are classified based on the centerline film thickness. A critical jet-to-crossflow momentum flux ratio (q) is determined to be proportional to the square of tunnel height. The averaged film thickness across the entire cross-section downstream at a distance of 50 mm from the nozzle is found to increase with the logarithm of q. Besides, the film boundaries are also identified under different flow conditions, which can be well predicted by a quadratic fit with the fitting parameters also correlated to the logarithm of q. [ABSTRACT FROM AUTHOR]

The development of network measurement technologies has greatly increased the speed of network scans, but it also poses risks for the stability of the scanned networks. How to reduce probing traffic and enhance the effectiveness of probing has become a new research issue. In this paper, we utilize network measurement and machine learning techniques, leveraging public interfaces from network mapping platforms to construct a dataset with 44 feature dimensions. By combining the categorical boosting (CatBoost) model with the particle swarm optimization (PSO) algorithm for heuristic optimization, we propose a host port openness prediction model that integrates the PSO algorithm and the CatBoost model. Through comparisons with various machine learning models, the effectiveness of our proposed model was validated. Using this model in network scanning can save approximately 65% of bandwidth on average, effectively reducing the impact on the probed network. [ABSTRACT FROM AUTHOR]

Torque is the fundamental working parameter of the internal combustion engine (ICE). In a spark ignition (SI) ICE, static torque is a function of rotational speed and throttle angle. However, ICE inertia, the distance between the throttle and cylinders, the time interval between subsequent intake strokes and increased oil viscosity in the warm-up phase limit the use of this characteristic in dynamic states. The novel and simple formula for calculating ICE torque in dynamic working states, presented in the article, includes all the mentioned factors. The new formula is based on ICE static tests where the torque, speed, throttle angle and airflow are measured. On the basis of the intake manifold geometry, the phenomena occurring in this component are described to determine the delay in the ICE response to throttle position changes. Moreover, the influence of ICE inertia is included. Finally, the formula includes the ICE warm-up period, which is characterized by high friction losses that decrease ICE torque. The proposed formula is validated by comparing model performance in dynamic working states with measurements. The results show a high level of accuracy: the delay in ICE response differs by less than 0.01 s, and the calculated torque differs by less than 5%. [ABSTRACT FROM AUTHOR]

The aim of this study was to assess the agreement of three different automated methods of identifying force-onset (40 N, 5 SDs, and 3 SDs) with manual identification, during the isometric mid-thigh pull (IMTP). Fourteen resistance-trained participants with >6 months experience training with the power clean volunteered to take part. After three familiarisation sessions, the participants performed five maximal IMTPs separated by 1 min of rest. Fixed bias was found between 40 N and manual identification for time at force-onset. No proportional bias was present between manual identification and any automated threshold. Fixed bias between manual identification and automated was present for force at onset and F150. Proportional but not fixed bias was found for F50 between manual identification and all automated thresholds. Small to moderate differences (Hedges g = −0.487- −0.692) were found for F90 between all automated thresholds and manual identification, while trivial to small differences (Hedges g = −0.122—−0.279) were found between methods for F200 and F250. Based on these results, strength and conditioning practitioners should not use a 40 N, 5 SDs, or 3 SDs threshold interchangeably with manual identification of force-onset when analysing IMTP force–time curve data. [ABSTRACT FROM AUTHOR]

Athletes use either an eight-step or a seven-step strategy to reach the first hurdle in the 110 m hurdles event. This study investigates the effect of step strategy on the hurdle clearance technique and spatio-temporal parameters of the four steps prior to hurdle clearance. Two-dimensional video data were collected in the sagittal plane from 12 male sprinters, grouped as seven-step (n = 6) or eight-step (n = 6) strategists. The take-off distance was 0.20 m further from the hurdle and the touchdown was 0.42 m closer to the hurdle for seven-step athletes. Additionally, seven-step athletes reduced the length of the final step before hurdle take-off by 0.14 m compared with the previous step, whereas the eight-step athletes extended their final step by 0.17 m. There was negligible difference between the mean horizontal velocities of the two groups throughout the hurdle clearance (0.02 m/s) or the approach time to the first hurdle from the block clearance (0.01 s). This presents an important first insight into the effect of the step strategy on the first hurdle kinematics. Our findings identify the take-off and touchdown distance parameters of the hurdle clearance technique, and approach step characteristics for a successful seven- or eight-step approach strategy to be employed. [ABSTRACT FROM AUTHOR]

In cross-country ski skating, both the G2 and G4 sub-techniques involve one pole push for every second ski push but are used at largely different speed-slope ranges. The aim of this study was to compare temporal and kinematic patterns between G2 and G4 at both identical and different speed-slope conditions. A mixed model was used to analyse spatio-temporal parameters, while a combination of dynamic time warping and statistical parametric mapping was used to compare time traces. Main spatio-temporal parameters, such as cycle time, ski contact time and swing time, differed between G2 and G4 (all p < 0.01). Moreover, two forward and more pronounced acceleration phases of the centre of mass (CoM) were visible in G4 while only one acceleration phase was present in G2. The more continuous propulsion in G2 allows for maintaining a more constant speed at steep slopes and low speeds where this sub-technique is preferred. In contrast, the achievement of high speeds while skiing on flatter terrain seem to require more dynamic motion with shorter, more explosive propulsion periods allowed for in G4. In conclusion, G2 and G4 are two unique movements as characterised by fundamentally different CoM motion and should be denoted as two different sub-techniques. [ABSTRACT FROM AUTHOR]

Combining biomechanics and motor control, the aim of this study was to investigate the limit cycle dynamics during the high bar longswing across the UK elite gymnastics pathway age groupings. Senior, junior and development gymnasts (N = 30) performed three sets of eight consecutive longswings on the high bar. The centre of mass motion was examined through Poincaré plots and recurrence quantification analysis exploring the limit cycle dynamics of the longswing. Close to one-dimensional limit cycles were displayed for the senior (correlation dimension (CD) = 1.17 ±.08), junior (CD = 1.26 ±.08) and development gymnasts (CD = 1.33 ±.14). Senior elite gymnasts displayed increased recurrence characteristics in addition to longer longswing duration (p <.01) and lower radial angular velocity of the mass centre (p <.01). All groups of gymnasts had highly recurrent and predictable limit cycle characteristics. The findings of this research support the postulation that the further practice, experience and individual development associated with the senior gymnasts contribute to the refinement of the longswing from a nonlinear dynamics perspective. These findings support the idea of functional task decomposition informing the understanding of skill and influencing coaches' decisions around skill development and physical preparation. [ABSTRACT FROM AUTHOR]

The aims of this study were to: (1) assess the stability (mean and normative) of the lap performance, and a set of clean swim and turn variables of junior male swimmers in the 200 m freestyle, and; (2) verify the relationship between the start, clean swim, turn, and finish phases in the 200 m freestyle. Seventy-six individual races in the 200 m freestyle at the 2019 long-course LEN European Junior Championships were analysed. Start, clean swim, turn, and finish variables were assessed. The lap performance showed a significant variance. The highest variation was verified between the first and third lap (Coefficient of Variation = 7.37%). The clean swim and the total turn also presented a significant variance. Normative stability indicated a moderate to very-high stability for all variables. All phases of the race had significant correlations with the final race time (p < 0.001). The total turn (i.e., the total time spent to perform the turn), specifically turn #3, showed the largest correlation with the total race performance. The significant correlation between all phases of the race and the final race time indicates that coaches and swimmers should customise the swimmers' preparation and race strategy at major international competitions, based on the individual characteristics of each swimmer. [ABSTRACT FROM AUTHOR]

The performance of high school teachers in Bandar Lampung is still low so it is necessary to look at other things that influence performance. Based on research results, the factors that influence performance are: creativity and grit. This study aims to examine the influence of creativity and grit factors on the performance of high school teachers in Bandar Lampung (N = 215). Individual Work Performance measurement is carried out using the Indonesian version of the Individual Work Performance Questionnaire (IWPQ) measuring instrument. Creativity was measured using the Indonesian version of the Runco Ideational Behavior Scale (RIBS). Grit was measured using the Short Grit Scale. The research results show that creativity has a positive and significant effect on teacher performance. The research results also show that grit has a positive and significant effect on teacher performance. The implications of this research for similar research are expected to be able to provide interventions on the variables of creativity and grit to further improve teacher performance and for teachers to continue to develop creativity and grit in order to improve their performance in the educational process. [ABSTRACT FROM AUTHOR]

Leaf respiratory carbon loss decreases independent of temperature as the night progresses. Detailed nighttime measurements needed to quantify cumulative respiratory carbon loss at night are challenging under both lab and field conditions. We provide a simple yet accurate approach to represent variation in nighttime temperature‐independent leaf respiratory CO2 efflux in environments with both stable and fluctuating temperatures, which requires no detailed measurements throughout the night. We demonstrate that the inter‐ and intraspecific variation in the cumulative leaf respiratory CO2 efflux at constant temperature, at any length of night, scales linearly with the inter‐ and intraspecific variation in initial measurement of leaf respiratory CO2 efflux at the same temperature at the beginning of the night. This approach informs large‐scale predictions of cumulative leaf respiratory CO2 efflux, which is needed to understand plant carbon economy in global change studies as well as in global modeling and eddy covariance monitoring of the land–atmosphere exchange of CO2. [ABSTRACT FROM AUTHOR]

The global Internet is a complex network of interconnected autonomous systems (ASes). Understanding Internet inter-domain path information is crucial for understanding, managing, and improving the Internet. The path information can also help protect user privacy and security. However, due to the complicated and heterogeneous structure of the Internet, path information is not publicly available. Obtaining path information is challenging due to the limited measurement probes and collectors. Therefore, inferring Internet inter-domain paths from the limited data is a supplementary approach to measure Internet inter-domain paths. The purpose of this survey is to provide an overview of techniques that have been conducted to infer Internet inter-domain paths from 2005 to 2023 and present the main lessons from these studies. To this end, we summarize the inter-domain path inference techniques based on the granularity of the paths, for each method, we describe the data sources, the key ideas, the advantages, and the limitations. To help readers understand the path inference techniques, we also summarize the background techniques for path inference, such as techniques to measure the Internet, infer AS relationships, resolve aliases, and map IP addresses to ASes. A case study of the existing techniques is also presented to show the real-world applications of inter-domain path inference. Additionally, we discuss the challenges and opportunities in inferring Internet inter-domain paths, the drawbacks of the state-of-the-art techniques, and the future directions. [ABSTRACT FROM AUTHOR]

Temperature measurement of devices in working state is of critical importance. In this work, GaN-based thermistors and a thermopile are monolithically integrated with a III-nitride blue light-emitting diode (LED) for the on-chip temperature measurement of the LED. The thermistor is based on the temperature-dependent resistance, and the stacked thermopile is based on the Seebeck effect. The measured results indicate that both thermistors and the thermopile can monitor the temperature of the LED sensitively. Due to the advantages of higher sensitivity and easier signal processing, the thermopile is more suitable for real-time monitoring. [ABSTRACT FROM AUTHOR]

Background: Despite widespread use of intensity zones to quantify external load variables in basketball research, the consistency in identifying zones and accompanying intensity thresholds using predominant monitoring approaches in training and games remains unclear. Objectives: The purpose of this work was to examine the external load intensity zones and thresholds adopted across basketball studies using video-based time-motion analysis (TMA), microsensors, and local positioning systems (LPS). Methods: PubMed, MEDLINE, and SPORTDiscus databases were searched from inception until 31 January 2023 for studies using intensity zones to quantify external load during basketball training sessions or games. Studies were excluded if they examined players participating in recreational or wheelchair basketball, were reviews or meta-analyses, or utilized monitoring approaches other than video-based TMA, microsensors, or LPS. Results: Following screening, 86 studies were included. Video-based TMA studies consistently classified jogging, running, sprinting, and jumping as intensity zones, but demonstrated considerable variation in classifying low-intensity (standing and walking) and basketball-specific activities. Microsensor studies mostly utilized a single, and rather consistent, threshold to identify only high-intensity activities (> 3.5 m·s−2 for accelerations, decelerations, and changes-in-direction or > 40 cm for jumps), not separately quantifying lower intensity zones. Similarly, LPS studies predominantly quantified only high-intensity activities in a relatively consistent manner for speed (> 18.0 m·s−1) and acceleration/deceleration zones (> 2.0 m·s−2); however, the thresholds adopted for various intensity zones differed greatly to those used in TMA and microsensor research. Conclusions: Notable inconsistencies were mostly evident for low-intensity activities, basketball-specific activities, and between the different monitoring approaches. Accordingly, we recommend further research to inform the development of consensus guidelines outlining suitable approaches when setting external load intensity zones and accompanying thresholds in research and practice. [ABSTRACT FROM AUTHOR]

Due to the higher susceptibility of children to ionizing radiation, it is imperative to evaluate the radon activity concentration (RAC) in educational buildings, conduct additional investigations to identify radon entry routes, and implement remedial measures to minimize exposure to this radioactive gas. In Romania, educational buildings are a category of public buildings where it is mandatory to perform RAC measurements. The present study examines data obtained from 41 Romanian educational buildings, where initial and additional radon investigations were performed. The first objective was to identify the factors influencing the variability of the RAC inside the buildings. The second objective was to emphasize the importance of short-term (a few days), continuous measurements in identifying buildings with RAC exceeding the reference level. High RAC values were associated with the classrooms located on the ground floor of the building compared to the administrative ones. The multiple linear regression led to a coefficient of determination of 0.11, the relative humidity and the amount of precipitation being the main variables with a significant impact, kept in the model, the lack of a significant association between the indoor RAC and the radon potential in the soil being obtained. Comparison of the radon long-term integrated measurements with continuous, short-term, led to the suggestion of three different scenarios for the measurement work protocol. By following the suggested modifications, it is possible to accelerate the procedure in situations where the time needed to plan renovations and radon remedial measures is shorter than the time needed to conduct integrated measurements. [ABSTRACT FROM AUTHOR]

Performance during the baseball pitch is dependent on the flow of mechanical energy through the kinetic chain. Little is known about energy flow during the pitching motion and it is not known whether patterns of energy flow are related to pitching performance and injury risk. Therefore, the purpose of this study was to quantify energy generation, absorption, and transfer across the shoulder and elbow during the baseball pitch and explore the associations between these energetic measures, pitch speed, and traditional measures of upper extremity joint loading. The kinematics of 40 youth baseball pitchers were measured in a controlled laboratory setting. Energy flow between the thorax, humerus, and forearm was calculated using a segmental power analysis. Regression analyses revealed that pitch speed was best predicted by arm cocking phase shoulder energy transfer to the humerus and peak elbow valgus torque was best predicted by arm acceleration-phase elbow energy transfer to the forearm. Additionally, energy transfer across the shoulder and elbow generally exhibited the strongest correlations to pitch speed and upper extremity joint loads. These data reinforce the importance of energy transfer through the kinetic chain for producing high pitch speeds and provide descriptive data for energy flow during baseball pitching not previously found in the literature. [ABSTRACT FROM AUTHOR]

The purpose of this study was to clarify the relationship between the efficiency of mechanical energy flow in the torso and bat head speed at impact. Ninety-eight amateur baseball players batted a light ball tossed from the pitcher direction 3.2 m away. The batting motion and ground reaction forces acting on each foot were recorded using a motion capture system and two force plates, respectively. The mechanical powers of the joint forces and joint torques were calculated to measure the generation, absorption, and transfer of mechanical energy in the torso. The transfer efficiency of mechanical energy in the torso was defined as the ratio of the mechanical energy inflow into the thorax from the torso joint to the mechanical energy outflow from the pelvis to the torso joint. The correlation coefficient between the bat head speed and transfer efficiency of mechanical energy in the torso was very low. Conversely, the mechanical energy flow in the torso was significantly correlated to the bat head speed. Therefore, the results suggest that the torso in baseball batting is not utilised for the generation of mechanical energy but acts as a pathway for the transfer of mechanical energy. [ABSTRACT FROM AUTHOR]

Milk has a high nutritional value and is also one of the most versatile products in the food industry. Unfortunately, fraud involving the product is constant and needs to be combated. This work presents a measurement methodology to perform the electrical impedance analysis in food. The influence of temperature on the measurements has been evaluated through mathematical models specially developed for identifying the fraudulent activity of adding water to milk. The bioimpedance measurements have been performed in a sample container with a four-electrode measurement system and a digital oscilloscope. Samples of 150 mL were analysed, prepared using whole UHT milk adulterated with distilled water in different % by volume (V/V), at temperatures of 16, 28, and 37 °C. The proposed measurement methodology has been validated and showed sensitivity for analysis in milk, revealing the influence of temperature on the impedance values; from the results mathematical models were proposed for investigating adulteration in milk. This work deals with the design of a device capable of measuring bioimpedance in milk with a view to its application in physicochemical analyses. The influence of temperature on the impedance values was also evaluated to propose mathematical models to facilitate analysis with complex factors and matrices. [ABSTRACT FROM AUTHOR]

The diagnostics of X‐ray beam properties has a critical importance at the European X‐ray Free‐Electron Laser facility. Besides existing diagnostic components, utilization of a diamond sensor was proposed to achieve radiation‐hard, non‐invasive beam position and pulse energy measurements for hard X‐rays. In particular, with very hard X‐rays, diamond‐based sensors become a useful complement to gas‐based devices which lose sensitivity due to significantly reduced gas cross‐sections. The measurements presented in this work were performed with diamond sensors consisting of an electronic‐grade single‐crystal chemical‐vapor‐deposition diamond with position‐sensitive resistive electrodes in a duo‐lateral configuration. The results show that the diamond sensor delivers pulse‐resolved X‐ray beam position data at 2.25 MHz with an uncertainty of less than 1% of the beam size. To our knowledge this is the first demonstration of pulse‐resolved position measurements at the MHz rate using a transmissive diamond sensor at a free‐electron laser facility. It can therefore be a valuable tool for X‐ray free‐electron lasers, especially for high‐repetition‐rate machines, enabling applications such as beam‐based alignment and intra‐pulse‐train position feedback. [ABSTRACT FROM AUTHOR]

The restructuring of Britain's civil service is understood mainly as a Thatcher- and Blair-era event rooted in neoliberal economic policies. Yet its roots reach back to the late 1960s and early 1970s. During that time, senior civil servants turned to American management strategy to advance the government's efforts to scale back the size of the service. This article explores these efforts via the activities of the Treasury's Management Services Division and its Head, John N. Archer. In 1969, Archer made a month-long visit to the United States to study American management techniques. Over the next few years, he and his colleagues attempted to implement one of these techniques in particular—Office Work Measurement—throughout the service. Derived from scientific management, OWM would, they believed, help cut the number of positions in the service. In tracing these efforts, the discussion sheds light on an under-analysed episode in Britain's civil service reform history. In turn, it argues that the OWM quest of the early 1970s played a heretofore under-emphasised role in the government's embrace of 'managerialism' and the implementation of civil service reforms. [ABSTRACT FROM AUTHOR]

Objective s : This pilot study examined the feasibility, acceptability, and effects of a Nintendo Ring Fit Adventure™‐based balance and muscle strengthening exercise program in community‐dwelling older adults with a history of falls. Methods: Older adults who have had at least one fall in the past year were randomly assigned to an experimental (n = 21) or control group (n = 21). The experimental group performed 16 exercise sessions in total, lasting 60 min each, twice a week for 8 weeks, whereas the control group received usual care. Feasibility was evaluated based on the scores of participants in the exercises. Acceptance was evaluated using a customised questionnaire examining participants' self‐perceived enjoyment, feasibility and improvements. Clinical outcomes including balance (Mini‐BESTest), lower limb muscle strength (Five‐Time Sit‐to‐Stand test), mobility (Timed‐Up and Go test), dual‐task ability (Timed‐Up and Go test—Dual Task), fear of falling (Icon‐FES) and executive function (Color Trails Test) were evaluated at baseline and 8 weeks. Results: Thirty‐one participants (74%) finished the 8‐week assessment. The experimental group significantly improved their scores in six out of eight exercises (all p <.031). The mean scores of the self‐perceived enjoyment, feasibility and improvement domains of the acceptability questionnaire were 3.46 ±.53, 3.08 ±.59, and 3.47 ±.57 respectively. A significant improvement in the anticipatory subscore of the Mini‐BESTest was found in the experimental group compared to the control group (p =.02; Partial eta squared =.14). Conclusions: The Nintendo Ring Fit Adventure™‐based exercise program was feasible, acceptable, and potentially effective in community‐dwelling older adults with a history of falls. [ABSTRACT FROM AUTHOR]

The work of educational measurement is a highly collaborative endeavor that brings together professionals from many disciplines. While the introduction of the "Foundational Competencies in Educational Measurement" acknowledges this, the explanation of the framework itself falls short in acknowledging the competencies and skills of those from disciplines other than psychometrics, such as content development professionals (CDPs). Therefore, it is unable to sufficiently address the nature of validation work or other work not led by psychometricians. It also underexplores the vital competencies that underlie effective collaboration. As a result, it defines the competencies of psychometric work instead of the larger field of educational measurement. [ABSTRACT FROM AUTHOR]

IP geolocation is essential for the territorial analysis of sensitive network entities, location-based services (LBS) and network fraud detection. It has important theoretical significance and application value. Measurement-based IP geolocation is a hot research topic. However, the existing IP geolocation algorithms cannot effectively utilize the distance characteristics of the delay, and the nodes’ connection relation, resulting in high geolocation error. It is challenging to obtain the mapping between delay, nodes’ connection relation, and geographical location. Based on the idea of network representation learning, we propose a representation learning model for IP nodes (IP2vec for short) and apply it to street-level IP geolocation. IP2vec model vectorizes nodes according to the connection relation and delay between nodes so that the IP vectors can reflect the distance and topological proximity between IP nodes. The steps of the street-level IP geolocation algorithm based on IP2vec model are as follows: Firstly, we measure landmarks and target IP to obtain delay and path information to construct the network topology. Secondly, we use the IP2vec model to obtain the IP vectors from the network topology. Thirdly, we train a neural network to fit the mapping relation between vectors and locations of landmarks. Finally, the vector of target IP is fed into the neural network to obtain the geographical location of target IP. The algorithm can accurately infer geographical locations of target IPs based on delay and topological proximity embedded in the IP vectors. The cross-validation experimental results on 10023 target IPs in New York, Beijing, Hong Kong, and Zhengzhou demonstrate that the proposed algorithm can achieve street-level geolocation. Compared with the existing algorithms such as Hop-Hot, IP-geolocater and SLG, the mean geolocation error of the proposed algorithm is reduced by 33%, 39%, and 51%, respectively. [ABSTRACT FROM AUTHOR]

Because the work function (WF) of the thermionic cathode of an electron gun is the primary factor for determining emission current density, the precise monitoring of the WF in actual operational conditions under high temperatures is essential for tracking the status of the cathode surface. We adjusted a theoretical model of quantum efficiency under high temperatures as proposed by R. H. Fowler to include the final energy state in the photoexcitation process. This modification is necessary for estimating the WF precisely with the measurement results obtained by photoelectron yield spectroscopy using a tunable pulsed laser in the wavelength range from 410 to 709 nm. As the first step of the investigation, we conducted WF measurements of a single-crystal CeB6 cathode, which is employed for the SACLA x-ray free-electron laser. The WF of the unused fresh CeB6 was 2.44 ± 0.02 eV at a high temperature of 836 °C. Our future plans for WF measurements are also discussed below. [ABSTRACT FROM AUTHOR]

The objectives of the present study were to determine whether (I) workmotive values influence the appraisal of specific work characteristics of significance for health and function and (II) subject variables impact workmotive values. Two aspects of work-motive values were studied: values that assign importance to pursuing one's personal goals and interests, internally based work-motive values (IntWMVs), and values that assign importance to external factors, externally based work-motive values (ExtWMVs). These aspects of motive values, age, gender, skill level, managerial role, and specific psychosocial work characteristics were analyzed in a cross-sectional sample of 12,994 employees in 101 private and public organizations. Twoyear follow-up prospective data from 6,252 employees in 69 organizations elucidated whether associations were stable over time. The results showed that IntWMV influenced reports of levels of control of decisions, empowering leadership, innovative climate, quantitative demands, feedback from work, and self-leadership. ExtWMVs were most consistently associated with role clarity. Skill level and managerial role were associated with reporting higher levels of IntWMVs and lower ExtWMVs. In conclusion, the present data support the assumption that work-motive values influence the appraisal, reporting, and consequently measurements of work characteristics. Managers differ from subordinates in work-motive values and may face challenges in ascertaining and supporting subordinates' needs. [ABSTRACT FROM AUTHOR]

Background: Opt2Move is a theory-guided moderate and vigorous physical activity (MVPA) promotion trial that uses multiphase optimization strategy (MOST) methodology to evaluate the individual and combined effects of four intervention components in a full factorial experiment among young adult cancer survivors (YACS; N = 304). All participants will receive the core mHealth MVPA intervention, which includes a Fitbit and standard self-monitoring Opt2Move smartphone application. YACS will be randomized to one of 16 conditions to receive between zero and four additional components each with two levels (yes v. no): E-Coach, buddy, general mindfulness, and MVPA-specific mindfulness. Objective: The primary aim is to determine the individual and combined effects of the components on MVPA post-intervention (12-weeks) and at 24-week follow-up. The secondary aim is to examine how changes in MVPA are associated with patient-reported outcomes, light-intensity activity, sedentary time, and sleep duration and quality. Potential mediators and moderators of component effects will also be examined. Results: Results will support the selection of a package of intervention components optimized to maximize MVPA to be tested in a randomized controlled trial. Conclusion: Opt2Move represents the first systematic effort to use MOST to design an optimized, scalable mHealth MVPA intervention for YACS and will lead to an improved understanding of how to effectively change YACS' MVPA and ultimately, improve health and disease outcomes. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Kirsehir Education Faculty is the property of Journal of Kirsehir Education Faculty and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Active galactic nuclei (AGNs), either radio-quiet or radio-loud, had never been observed in X-ray polarized light until the advent of the Imaging X-ray Polarimetry Explorer (IXPE) in the end of 2021. This satellite opened a new observational window for studying supermassive black holes and their complex environment. In this regard, radio-quiet AGNs are probably better targets than radio-loud objects to probe accretion processes due to the lack of synchrotron emission from jets that can dilute the polarized signal from the central engine. Their relatively clean environment not only allows to detect and measure the X-ray polarization originating from the hot corona responsible for X-ray emission, but also to assess the geometry of the media immediately surrounding the supermassive black hole. Such geometrical measurements work just as well for characterizing the corona morphology in pole-on AGNs as it does for determining the three-dimensional shape of the circumnuclear cold obscurer (the so-called torus) in edge-on AGNs. In this review paper, we will return to each of the observations made by IXPE so far in the field of radio-quiet AGNs and highlight the fundamental contribution of X-ray polarimetry to our understanding of how light is emitted and how matter is shaped around supermassive black holes. [ABSTRACT FROM AUTHOR]

The standard time gives a measure of how long it takes a process or workpiece to pass through each operation. It is mainly established by work measurement methodology giving the time allowed to an operator to carry out a specified task under specified conditions and defined level of performance. This definition may be with respect to a task (a job element or an activity) or a product (consisting of many tasks). In the latter case, which is the main thrust of this work, as one job element passes through different resource (work) centres, another job element of subsequent ones will immediately follow and this will continue until the last job element is completed as a whole, this means value added at each work centre. This scenario will affect the level of inventory in the system and the level of inventory in the system depends on the type of production system and configuration (series, parallel or a combination of both) adopted. This too will affect the standard time for a single product (one-off), single product (mass produced), mixed or different products which may utilize assembly line philosophy and products in batches even with backtracking. Different examples have been used to highlight this scenario with different approaches developed which have gone a long way to improve on the solution techniques of the existing models. [ABSTRACT FROM AUTHOR]

Objective: Determining the working length (WL) in root canal treatment facilitates the treatment prognosis. The introduction of apex locators and new devices in dentistry influenced this consideration. This comparative study evaluated the accuracy of working length measurement by cone beam computed tomography (CBCT) in three fields of view (FOVs), conventional radiography, and the apex locator Raypex 5. Methods: The descriptive-analytical study was performed on 40 mandibular premolar teeth that met the inclusion criteria. Direct observation under the microscope was considered the gold standard and compared with measurements by the electronic apex locator, CBCT at three field of view settings and periapical images. The results were analyzed by paired t-tests and Wilcoxon tests. The level of significance was set at 0.05 (p=0.05). Results: Results showed that the CBCT at 5×5 FOV (p=0.733) and Conventional radiography(p=0.001) achieved the working lengths with the highest and lowest accuracy, respectively. In addition, the difference between actual and measured working length using conventional radiography was significant (p<0.05). Conclusion: According to the results of this study, CBCT images at different FOVs and those taken by the apex locator Raypex 5 can be used as a reliable method for estimating the working length. [ABSTRACT FROM AUTHOR]

Electromagnetic levitation (EML) is a promising technique allowing to melt various materials, including refractive metals, while avoiding physical contact between the molten material and components of the melting system, thus avoiding contamination of the molten material. EML coils act both as a container and a heating source for a conductive sample placed within it. EML systems are difficult to optimize for specific tasks and computational simulations are often used to aid the process. Development of simulations of EML processes is an ongoing field of research. Obtaining precise experimental measurement data of EML processes is important for development and verification of computational simulations. This study aims to provide experimental data of simultaneous measurements for magnetic field, Joule heating and lift force in different conical EML coils with a counterturn. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate the effect of skill modifications on head motion experienced during women's artistic gymnastics skills. Nine gymnasts (four beginner and five advanced) completed three trials of up to 24 skill progressions, each consisting of a skill and two progressive safety modifications. Gymnasts were instrumented with mouthpiece sensors embedded with an accelerometer and gyroscope collecting motion data at 200, 300, and 500 Hz during each skill performance. Peak-to-peak linear and rotational kinematics during contact phases and peak rotational kinematics during non-contact phases were computed. A mixed-effects model was used to compare differences in modification status nested within skill categories. Timer skills (i.e. drills that simulate performance of a gymnastics skill) resulted in the highest median ΔLA and ΔRA of all skill categories, and 132 skill performances exceeded 10 g ΔLA during a contact phase. Modifications were associated with significant reductions in head kinematics during contact phases of timers, floor skills, bar releases, and vault skills. Gymnasts can be exposed to direct and indirect head accelerations at magnitudes consistent with other youth contact sports, and common safety modifications may be effective at reducing head motion during contact and non-contact phases of gymnastics skills. [ABSTRACT FROM AUTHOR]

Online measurement of disk part dimensions by the standard industrial camera features low cost, high efficiency and good universality, but the impact of projection distortion and end face chamfer on measurement is needed to overcome. Present work presents a measurement method to resolve above issues based on machine vision. To improve the measurement accuracy, lower end face of a disk part is determined as calibration plane and the upper end face is measurement plane. To reduce the impact of projection distortion and chamfer on measurement, the measurement points are reconstructed on the measurement plane by re-projection. Then, the inner and outer diameters of disk parts are measured by circle geometric fitting, and the thickness is calculated by the measurement plane position. The experimental results show that the method can online measure disk part dimensions just by a single image, and accuracy meets the requirements of universal grade disk parts. [ABSTRACT FROM AUTHOR]

Background: Early childhood caries (ECC) is a major global health issue affecting millions of children. Mitigating this problem requires up-to-date information from reliable surveillance systems. This enables evidence-based decision-making to devise oral health policies. The World Health Organization (WHO) advocates the adoption of mobile technologies in oral disease surveillance because of their efficiency and ease of application. The study describes developing an electronic, oral health surveillance system (EOHSS) for preschoolers in Egypt, using the District Health Information System (DHIS2) open-source platform along with its Android App, and assesses its feasibility in data acquisition. Methods: The DHIS2 Server was configured for the DHIS2 Tracker Android Capture App to allow individual-level data entry. The EOHSS indicators were selected in line with the WHO Action Plan 2030. Two modalities for the EOHSS were developed based on clinical data capture: face-to-face and tele/asynchronous. Eight dentists in the pilot team collected 214 events using modality-specific electronic devices. The pilot's team's feedback was obtained regarding the EOHSS's feasibility in collecting data, and a time-motion study was conducted to assess workflow over two weeks. Independent t-test and Statistical Process Control techniques were used for data analysis. Results: The pilot team reported positive feedback on the structure of the EOHSS. Workflow adaptations were made to prioritize surveillance tasks by collecting data from caregivers before acquiring clinical data from children to improve work efficiency. A shorter data capture time was required during face-to-face modality (4.2 ± 0.7 min) compared to telemodality (5.1 ± 0.9 min), p < 0.001). The acquisition of clinical data accounted for 16.9% and 21.1% of the time needed for both modalities, respectively. The time required by the face-to-face modality showed random variation, and the tele-modality tasks showed a reduced time trend to perform tasks. Conclusions: The DHIS2 provides a feasible solution for developing electronic, oral health surveillance systems. The one-minute difference in data capture time in telemodality compared to face-to-face indicates that despite being slightly more time-consuming, telemodality still shows promise for remote oral health assessments that is particularly valuable in areas with limited access to dental professionals, potentially expanding the reach of oral health screening programs. [ABSTRACT FROM AUTHOR]

ZrW2O8 (ZrO2•2WO3) and HfW2O8 (HfO2•2WO3) have been the focus of thermal expansion studies due to their isotropic negative thermal expansion (NTE) measured previously at temperatures below 775°C. This work presents measurements of these materials at their thermodynamically stable temperature ranges of 1105 and 1257°C for ZrW2O8 and 1105–1276°C for HfW2O8, where they were characterized with in situ, powder X‐ray diffraction. The linear coefficients of thermal expansion were measured to be −5.52 × 10−6 and −4.87 × 10−6°C−1 for ZrW2O8 and HfW2O8, respectively. The mechanism leading to this NTE is discussed. Powder samples were synthesized by a solution‐based process called the organic–inorganic steric entrapment method. In situ characterization in air was carried out at the National Synchrotron Light Source II using a hexapole lamp, optical furnace and the Advanced Photon Source using a quadrupole lamp, optical furnace to achieve elevated temperatures. [ABSTRACT FROM AUTHOR]

This study explored the extent that Supervisory Working Alliance (SWA) scores may be subject to ceiling effect. A meta-analysis of 75 SWA scores found a mean ceiling effect estimate (CEE) of 1.51, indicating that scores averaged 1.5 SDs below the score cap. Approximately 92% of scores had evidence of ceiling bias. Supplementary analysis found significant differences in ceiling effect existed among common SWA scales and that international samples evidenced lower ceiling effect than U.S. samples. Authors concluded that SWA scores have been subject to attenuation effects caused by restricted range and the influence of the SWA has likely been underestimated. [ABSTRACT FROM AUTHOR]

Despite its increasing popularity, swing dancing has not been fully studied biomechanically, imposing challenges in understanding the movement patterns associated with swing dancing. The purpose of this study was to examine the biomechanics of the triple step, one of the most common swing dance elements. We intended to determine whether dancing with a partner affects kinetic measurements and if these measurements are different among the three steps. Eight recreational swing dancers completed three triple steps to the right and the left with and without a partner. The loading rate of the vertical ground reaction force was calculated for each step, and bilateral lower limb joints moments and powers were determined. Results illustrated that dancing with or without a partner has limited effect on the kinetic measurements. However, the outcome measurements differed among the steps: a higher peak vertical ground reaction force during the first and second steps, a greater loading rate during the second step, and the greatest joint power absorption at the ankle and knee during the second step were observed. The findings extend our understanding of the biomechanics of swing dancing, and could provide preliminary guidance for understanding swing dance-related injuries and improving performance of swing dancing. [ABSTRACT FROM AUTHOR]