Search

[Display omitted] • Ficus genera (Moraceae) fruits are rich in phenolics compounds. • Ficus carica is the most studied species of the genera. • Antioxidant and antimicrobial activities were the most reported. • Proximate and mineral composition were described in Ficus species. • The review encourages future studies with Ficus fruits as functional foods. The aim of this review was to compile the main reports over the last 5 years concerning the Ficus spp. fruits (Moraceae family) based on chemistry, properties, and applications as products. About 30 Ficus spp. fruits were reported focusing on their chemical composition rich in phenolic acids such as gallic, caffeic and chlorogenic acids, as well as quercetin and cyanidin derivatives. The fruits from Moraceae family presented mainly antioxidant and antimicrobial properties in addition to other functional properties to consumers health. Therefore, these fruits can be successfully considered by the food industry for the development of new products with high added value and also be considered a source of bioactive compounds. [ABSTRACT FROM AUTHOR]

Extracted from a tuberous root of the Amazon forest named Ariá (Goeppertia allouia), starch samples were submitted to four γ-radiation doses of 1, 5, 20 and 50 kGy and investigated by powder X-ray diffraction (XRD) and pasting properties. The XRD patterns were quantified by the Rietveld refinement method and the pasting properties by Palabiyik's, Hill's and Arrhenius models. Crystallinity values were obtained considering the semi-crystalline microstructures (mean crystallites sizes and microstrains) and the weight fraction of the semi-crystalline phases were calculated considering the diffuse X-ray scattering. The combination of the techniques revealed that the increase in the amorphous component is related to the continuous degradation of the semi-crystalline phases in lower molecular weight sugars that also increased pasting temperature and delaying the gelation process. The reduction in the activation energy of the phase transition is associated with the accumulated energy in the defects, induced by γ-radiation. [Display omitted] • Starch from Ariá was subjected to γ-radiation and identified as C-type starch, composed of the A-type and B-type polymorphs. • A new approach was proposed to quantify the phase content and crystallinity of starches using XRD and Rietveld method. • The amorphous component increases with the growth of small sugar molecules generated by amylopectin chain breakage. • The γ-radiation dose progressively influences the physicochemical properties of Ariá starch. • Irradiation promoted partial dextrinization of the sample, influencing the physicochemical properties of the starch. [ABSTRACT FROM AUTHOR]

• Açai and buriti juice were sonicated. • Effect of energy density was evaluated on physical-chemical properties. • Significant effect of energy density was observed in volatile and acid acids. • Sonication resulted in better bioaccessibility of anthocyanins and β-carotene. The aim of this paper was to evaluate the effect of high energy ultrasound on the bioaccessibility of bioactive compounds from açaí (Euterpe precatoria) and buriti (Mauritia flexuosa) juices. Five levels of energy density (0, 0.9, 1.8, 2.7 and 3.6 J.cm−3), as well as their effects on the bioactive compounds were evaluated. Ultrasound did not significantly influence pH, titratable acidity and soluble solids. However, it affected the color attributes of juices by increasing brightness and color variation. The concentration of bioactive compounds (anthocyanins and carotenoids) and antioxidants increased with increasing ultrasound energy density, which was confirmed by Principal Component Analysis (PCA). Fatty acids increased up to 2.7 J.cm−3 and were reduced when higher energy was employed on the ultrasound process. Ultrasound allowed the release of new aromatic substances. For this reason, the ultrasound technology can be considered an alternative pre-treatment for fruit juices, improving the bioaccessibility and concentration of bioactive compounds. [ABSTRACT FROM AUTHOR]

Microparticles of whey protein isolate (WPI) and ora-pro-nobis mucilage (OPN) encapsulated α-tocopherol were made using long-chain unsaturated (e.g., canola oil (CA)) or medium-chain saturated oil (e.g., coconut oil (CO)) as the carrier oil. Microparticles were produced from CO- or CA-in-water emulsions by freeze-drying emulsions with various ratios of WPI/OPN. Before freeze dying, emulsions exhibited Newtonian or shear-thinning behavior. Drying yields for freeze-dried emulsions ranged between 74.1% and 87.1% w/w, depending on the biopolymers-to-oil ratio and varied depending on whether CA or CO was used as the carrier. WPI:OPN ratios (between 23:1 and 7:1) nor oil phase (e.g., CO or CA) significantly affected the physical properties (e.g., oil retention, water content, and activity) of the dried powder between treatments. Higher powder bulk density (0.22 g cm−3) and encapsulation efficiency (79.8% w/w) were obtained from freeze-drying CO-, compared to CA-in-water emulsions and with higher concentrations of OPN. Over 35 days, α-tocopherol retention and degradation kinetics differed between CO and CA and was dependent on relative humidity. Bioaccessibility of encapsulated α-tocopherol was higher with WPI/OPN and CA (55.0 ± 1.89%) compared to CO (42.4 ± 1.78%), while the rate of α-tocopherol release and induction time for release were statically equal. Image 1 • Encapsulation of α-tocopherol in microparticles obtained from freeze-drying o/w emulsions using natural polymers. • Microcapsules presented high yield and oil retention with low moisture and a w. • α-tocopherol bioaccessibility was altered by unsaturated/medium-chain fatty acids. • WPI/OPN powders are effective encapsulation materials and would be an excellent functional additive. [ABSTRACT FROM AUTHOR]

Poly(o -methoxyanilines) (POMA) were chemically synthesized using different dopant acids to obtain the polymers POMA/HCl, POMA/HNO 3 , POMA/H 2 SO 4 and POMA/H 3 PO 4. The nature and size of the counterions influenced considerably on the structural, morphological, thermal and electrical properties of the as-synthesized polymers. X-ray Diffraction (XRD) patterns presented slightly peak displacements according to the dopant acid, influencing the lattice parameters specially along [010]. The polymers POMA/HCl, POMA/HNO 3 and POMA/H 2 SO 4 presented similar percentage of crystallinity (around 50%), while the polymer POMA/H 3 PO 4 presented de lower crystallinity (around 40%). Polymer morphology was dependent on the dopant acid, besides multimorphologies were observed in the polymers POMA/HCl, POMA/HNO 3 and POMA/H 3 PO 4. A great counterion influence from the doping acid was found in the electrical properties of the material. The total variation obtained in DC conductivity was five orders of magnitude. The calculated values were 6.6 × 10−1 S/cm, 1.11 × 10−2 S/cm, 3.64 × 10−3 S/cm, 5.2 × 10−4 S/cm for POMA/HCl, POMA/HNO 3 , POMA/H 2 SO 4 and POMA/H 3 PO 4 , respectively. The use of HCl as a dopant potentiated the DC conductivity of the polymeric material. Image 1005 • X-ray Diffraction patterns presented peak displacements according to the dopant acid. • Polymer morphology was dependent on the dopant acid. • Crystallites reached a maximum average size. • Electrical conductivity of POMA/H 3 PO 4 was dependent on the frequency. • The use of HCl potentiated the DC conductivity of the polymeric material. [ABSTRACT FROM AUTHOR]

Poly(m -anisidines) (PMA) were chemically synthesized using different dopant acids to obtain the polymers PMA/HCl, PMA/HNO 3 and PMA/H 2 SO 4. Structural, morphological, thermal and electrical properties of the as-synthesized polymers were investigated. In addition, the Density Functional Theory (DFT) was performed to support some experimental results. The semi crystalline X-ray Diffraction (XRD) patterns presented slightly peak displacements, influencing the lattice parameters specially along [010]. Solid spheres were observed in the Scanning Electron Microscopy (SEM) for all polymers; however, the use of larger counterion size resulted in smaller particle diameter. Band energy structure showed a charge transfer between polymer chains and counterions. High charge density was located around nitrogen and oxygen atoms from the counterions NO 3 − , and HSO 4 − , resulting in higher electrical conductivities for the polymers PMA/HNO 3 and PMA/H 2 SO 4. Finally, the electrical conductivity values obtained experimentally were in agreement with the results from DFT calculations, justifying the highest value of 3.62 × 10−7 S/cm for the polymer PMA/H 2 SO 4. Image 10105 • XRD patterns presented peak displacements due to the counterions size. • Counterions size influenced on the lattice parameters along [010]. • All polymers were constituted of solid spheres. • Counterions size influenced on the particle diameter. • A charge transfer between polymer chains and counterions was verified. [ABSTRACT FROM AUTHOR]

• The interaction between gelatin and Gum Arabic generated a polyelectrolyte complex. • The polyelectrolyte complex formation promoted higher atomization yield. • The concentration of gum arabic significantly influences the atomization. • Gum arabic improves the characteristics of the piramutaba gelatin. The aim of this study was to evaluate and characterize the interaction between fish gelatin (FG) and Gum Arabic(GA) and its effects in obtaining optimal atomization conditions. The optimal conditions (D = 0.866) founded in this paper were: Gum Arabic concentration of 33.4% and inlet air temperature of 130 °C. These conditions afforded 6.62 g/h yield, 0.27 a w and 247 g of Gel Strength, that are considered as suitable characteristics for food grade gelatin. The complex formed (FG-GA) was successfully obtained, as demonstrated by the results of amino acid profile, SDS-PAGE, FTIR spectroscopy, zeta potential and morphology. It was also verified that the formation of FG-GA promotes positive changes, such as higher atomization yield, adequate Gel Strength, low hygroscopicity and high solubility. The technological properties of FG-GA shown high potential to be applied in the food industry as well in other industrial fields like chemical and pharmaceutical areas. [ABSTRACT FROM AUTHOR]

The environment preservation has been an important motivation to find alternative, functional, and biodegradable materials to replace polluting petrochemicals. The production of nonbiodegradable face masks increased the concentration of microplastics in the environment, highlighting the need for sustainable alternatives, such as the use of local by-products to create efficient and eco-friendly filtering materials. Furthermore, the use of smart materials can reduce the risk of contagion and virus transmission, especially in the face of possible mutations. The development of novel materials is necessary to ensure less risk of contagion and virus transmission, as well as to preserve the environment. Taking these factors into account, 16 systems were developed with different combinations of precursor materials (holocellulose, polyaniline [ES-PANI], graphene oxide [GO], silver nanoparticles [AgNPs], and activated carbon [AC]). Adsorption tests of the spike protein showed that the systems containing GO and AC were the most efficient in the adsorption process. Similarly, plate tests conducted using the VSV-IN strain cultured in HepG2 cells showed that the system containing all phases showed the greatest reduction in viral titer method. In agreement, the biocompatibility tests showed that the compounds extracted from the systems showed low cytotoxicity or no significant cytotoxic effect in human fibroblasts. As a result, the adsorption tests of the spike protein, viral titration, and biocompatibility tests showed that systems labeled as I and J were the most efficient. In this context, the present research has significantly contributed to the technological development of antiviral systems, with improved properties and increased adsorption efficiency, reducing the viral titer and contributing efficiently to public health. In this way, these alternative materials could be employed in sensors and devices for filtering and sanitization, thus assisting in mitigating the transmission of viruses and bacteria. RESEARCH HIGHLIGHTS: Sixteen virus adsorbent systems were developed with different combinations of precursor materials (holocellulose, polyaniline (ES-PANI), graphene oxide (GO), silver nanoparticles (AgNPs), and activated carbon (AC)). The system that included all of the nanocomposites holocellulose, PANI, GO, AgNPs, and AC showed the greatest reduction in viral titration. The biocompatibility tests revealed that all systems caused only mild or moderate cytotoxicity toward human fibroblasts., (© 2024 Wiley Periodicals LLC.)

This study explored the impact of various label information (extrinsic attributes) and sociodemographic and attitudinal factors (intrinsic attributes) on Brazilian consumer choices, using simulated traditional and plant-based muçarela cheese as the model product. The research was conducted in two phases: the first involved a structured questionnaire assessing attitudinal dimensions such as Health Consciousness, Climate Change, Plant-based Diets, and Food Neophobia, along with sociodemographic data collection. The second phase comprised a discrete choice experiment with (n = 52) and without (n = 509) eye tracking. The term "Cheese" on labels increased choice probability by 7.6% in a general survey and 15.1% in an eye tracking study. A prolonged gaze at "Cheese" did not affect choice, while more views of "Plant-based product" slightly raised choice likelihood by 2.5%. Repeatedly revisiting these terms reduced the choice probability by 3.7% for "Cheese" and 1% for "Plant-based product". Nutritional claims like "Source of Vitamins B6 and B12" and "Source of Proteins and Calcium" boosted choice probabilities by 4.97% and 5.69% in the general and 8.4% and 6.9% in the eye-tracking experiment, respectively. Conversely, front-of-package labeling indicating high undesirable nutrient content decreased choice by 13% for magnifying presentations and 15.6% for text. In a plant-based subsample, higher environmental concerns and openness to plant-based diets increased choice probabilities by 5.31% and 5.1%, respectively. These results highlight the complex dynamics between label information, consumer understanding, and decision-making.

Drug-release systems have attracted attention over the last few years since they can be used as a substitute for traditional methods of drug delivery. These have the advantage of being directly administered at the treatment site and can maintain the drug at adequate levels for a longer period, thus increasing their efficacy. Starch-based films are interesting candidates for use as matrices for drug release, especially due to starch's non-toxic properties and its biocompatibility. Endophytic fungi are an important source of bioactive molecules, including secondary metabolites such as phenolic compounds with antioxidant activity. In the present study, cassava starch-based films were developed to act as release systems of phenolic compounds with antioxidant activity. The Amazonian endophytic fungus Aspergillus niger MgF2 was cultivated in liquid media, and the fungal extract was obtained by liquid-liquid partition with ethyl acetate. The starch-based films incorporated with the fungal extract were characterized in regards to their physicochemical properties. The release kinetics of the extract from the film and its antioxidant and cytotoxic properties were also evaluated. The films incorporated with the extract presented maximum release after 25 min at 37 °C and pH 6.8. In addition, it was observed that the antioxidant compounds of the fungal extract maintain their activity after being released from the film, and were non-toxic. Therefore, considering the promising physicochemical properties of the extract-incorporated films, and their considerable antioxidant capacity, the films demonstrate great biotechnological potential with diverse applications in the pharmacological and cosmetic industries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The Sapotaceae family encompasses the genus Pouteria spp., comprising approximately 1,250 species of fruits cherished by consumers for their delightful assortment and flavors. Over the years, extensive research has been devoted to exploring the natural bioactive compounds present in these fruits, with the primary goal of preventing and/or mitigating the risk of degenerative diseases. Despite their widespread popularity in numerous countries, the chemistry, nutritional content, and biological potential of these fruits remain relatively unexplored. This comprehensive review aims to shed light on the principal volatile and non-volatile chemical components found in Pouteria fruits, which present notable antioxidant properties. By doing so, a broad perspective on the current trends in characterizing these compounds and their potential applications were provided, as well as the associated health benefits. Additionally, the prospects and potential applications of Pouteria fruits in the food industry were explored herein., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Sapota-do-Solimões (Quararibea cordata Vischer) is Amazon South América fruit found in Brazil, Colombia, Ecuador, and Peru. The orange-yellow fruit is usually eaten out of hand or as juice. Despite being a source of carotenoids and dietary fibers (pectin) that can reach the colon and act as an energy source for intestinal microbiota, the fruit is rarely known outside of South America. The symbiotic juice was prepared by fermenting the fruit juice with Lacticaseibacillus casei B-442 and adding prebiotic fructooligosaccharides (FOS, 7% w/v). This study evaluated the functional juice immediately after L. casei fermentation (SSJ0) and after 30 days of cold storage (SSJ30) regarding its effect on human colonic microbiota composition after in vitro fermentation. Fecal samples were collected from two healthy female volunteers, and the 16s rRNA gene sequencing analyzed the fecal microbiota composition. In vitro, colonic fermentation was performed using a batch bioreactor to simulate gastrointestinal conditions. The L. casei viability did not change significantly after 30 days of the synbiotic juice cold storage (4 °C). After the colonic fermentation, the relative abundance of Firmicutes decreased while Proteobacteria and Actinobacteria increased. Regarding short-chain fatty acid (SCFA) production by fecal colonic microbiota, the butyric acid was higher after sample SSJ0 fecal fermentation. In contrast, propionic, isobutyric, and acetic acids were higher after SSJ30 sample fecal fermentation. This study contributes to understanding the interactions between specific foods and the gut microbiota, which can affect human health and well-being., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The interest in the consumption of edible flowers has increased since they represent a rich source of bioactive compounds, which are significantly beneficial to human health. The objective of this research was to access the bioactive compounds and antioxidant and cytotoxic properties of unconventional alternative edible flowers of Hibiscus acetosella Welw. Ex Hiern. The edible flowers presented pH value of 2.8 ± 0.00, soluble solids content of 3.4 ± 0.0 °Brix, high moisture content of about 91.8 ± 0.3%, carbohydrates (6.9 ± 1.2%), lipids (0.90 ± 0.17%), ashes (0.4 ± 0.0%), and not detectable protein. The evaluation of the scavenging activity of free radicals, such as 2,2-diphenyl-1-picryl-hydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), of the flower extract was better than the results observed for other edible flowers (507.8 ± 2.7 μM TE and 783.9 ± 30.8 μM TE, respectively) as well as the total phenolic composition (TPC) value (568.8 ± 0.8 mg GAE/g). These flowers are rich in organic acids and phenolic compounds, mainly myricetin, and quercetin derivatives, kaempferol, and anthocyanins. The extract showed no cytotoxicity for the cell lineages used, suggesting that the extract has no directly harmful effects to cells. The important bioactive compound identified in this study makes this flower especially relevant in the healthy food area due to its nutraceutical potential without showing cytotoxicity.

Considerable efforts have been spent on the development of biodefensives based on the encapsulation of essential oils for controlling of urban pests from their larval stage, especially as anopheline controlling agents. The larval source management of Anopheles aquasalis is important for malaria prevention. For this reason, this research proposes larvicidal biodefensives based on polymeric particles loaded with Piper nigrum essential oil, considering the influence of temperature (35 °C) and preservatives on the formulation stability. The biodefensive containing the preservative phenoxyethanol/methylisothiazolinone (PNE) resulted in 5 months of shelf-life storage with an Encapsulation Efficiency (EE%) of essential oil of 70%. The biodefensive PNE (containing 500 µg.mL -1 of encapsulated essential oil) presented a polydisperse particle size distribution, ranging from D 10 = (127 ± 10) nm to D 90 = (472 ± 78) nm and a particle mean size of (236 ± 34) nm. The AFM images revealed a spherical morphology with an external surface almost regular and smooth. The controlled release of the essential oil was evaluated up to 72 h according to the Korsmeyer-Peppas mathematical model, confirming the anomalous transport ( n = 0.64 in pH = 3 and pH = 10, and n = 0.65 in pH = 7). The total larvae mortality on the in loco bioassays was almost reached (92%) after 24 h. However, according to the in vitro bioassays applying the in natura essential oil alone, the concentration of 454 μg.mL -1 resulted on the mortality of 70% of the larvae after 24 h. For this reason, the highest efficiency of the biodefensive PNE may be related to the encapsulation of essential oil, delivering the loaded particles more efficiently inside the larvae. From this perspective, the present study shows that a formulation based on P. nigrum essential oil may be taken into account in the integrated management of disease vector mosquitoes.

Bromelain has potential as an analgesic, an anti-inflammatory, and in cancer treatments. Despite its therapeutic effects, this protein undergoes denaturation when administered orally. Microencapsulation processes have shown potential in protein protection and as controlled release systems. Thus, this paper aimed to develop encapsulating systems using sodium alginate as a carrier material and positively charged amino acids as stabilizing agents for the controlled release of bromelain in in vitro tests. The systems were produced from the experimental design of centroid simplex mixtures. Characterizations were performed by FTIR showing that bromelain was encapsulated in all systems. XRD analyses showed that the systems are semi-crystalline solids and through SEM analysis the morphology of the formed systems followed a pattern of rough microparticles. The application of statistical analysis showed that the systems presented behavior that can be evaluated by quadratic and special cubic models, with a p-value < 0.05. The interaction between amino acids and bromelain/alginate was evaluated, and free bromelain showed a reduction of 74.0% in protein content and 23.6% in enzymatic activity at the end of gastric digestion. Furthermore, a reduction of 91.6% of protein content and 65.9% of enzymatic activity was observed at the end of intestinal digestion. The Lis system showed better interaction due to the increased stability of bromelain in terms of the amount of proteins (above 63% until the end of the intestinal phase) and the enzymatic activity of 89.3%. Thus, this study proposes the development of pH-controlled release systems aiming at increasing the stability and bioavailability of bromelain in intestinal systems.

Poly( p -anisidine) (PPA) is a polyaniline derivative presenting a methoxy (-OCH 3 ) group at the para position of the phenyl ring. Considering the important role of conjugated polymers in novel technological applications, a systematic, combined experimental and theoretical investigation was performed to obtain more insight into the crystallization process of PPA. Conventional oxidative polymerization of p -anisidine monomer was based on a central composite rotational design (CCRD). The effects of the concentration of the monomer, ammonium persulfate (APS), and HCl on the percentage of crystallinity were considered. Several experimental techniques such as X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), multifractal analysis, Nuclear Magnetic Resonance ( 13 C NMR), Fourier-transform Infrared spectroscopy (FTIR), and complex impedance spectroscopy analysis, in addition to Density Functional Theory (DFT), were employed to perform a systematic investigation of PPA. The experimental treatments resulted in different crystal structures with a percentage of crystallinity ranging from (29.2 ± 0.6)% (PPA1 HT ) to (55.1 ± 0.2)% (PPA16 HT-HH ). A broad halo in the PPA16 HT-HH pattern from 2θ = 10.0-30.0° suggested a reduced crystallinity. Needle and globular-particle morphologies were observed in both samples; the needle morphology might have been related to the crystalline contribution. A multifractal analysis showed that the PPA surface became more complex when the crystallinity was reduced. The proposed molecular structures of PPA were supported by the high-resolution 13 C NMR results, allowing us to access the percentage of head-to-tail (HT) and head-to-head (HH) molecular structures. When comparing the calculated and experimental FTIR spectra, the most pronounced changes were observed in ν(C-H), ν(N-H), ν(C-O), and ν(C-N-C) due to the influence of counterions on the polymer backbone as well as the different mechanisms of polymerization. Finally, a significant difference in the electrical conductivity was observed in the range of 1.00 × 10 -9 S.cm -1 and 3.90 × 10 -14 S.cm -1 , respectively, for PPA1 HT and PPA16 HT-HH .

A new systematic structural study was performed using the Atomic Force Microscopy (AFM) reporting statistical parameters of polymeric particles based on gelatin and poly- ε -caprolactone (PCL) containing essential oil from Lippia origanoides . The developed biocides are efficient alternative controlling agents of Conotrachelus humeropictus and Moniliophtora perniciosa , the main pests of Theobroma grandiflorum . Our results showed that the particles morphology can be successfully controlled by advanced stereometric parameters, pointing to an appropriate concentration of encapsulated essential oil according to the particle surface characteristics. For this reason, the absolute concentration of 1000 µg·mL -1 (P 1000 system) was encapsulated, resulting in the most suitable surface microtexture, allowing a faster and more efficient essential oil release. Loaded particles presented zeta potential around (-54.3 ± 2.3) mV at pH = 8, and particle size distribution ranging from 113 to 442 nm. The hydrodynamic diameter of 90% of the particle population was found to be up to (405 ± 31) nm in the P 1000 system. The essential oil release was evaluated up to 80 h, with maximum release concentrations of 63% and 95% for P 500 and P 1000 , respectively. The best fit for the release profiles was obtained using the Korsmeyer-Peppas mathematical model. Loaded particles resulted in 100% mortality of C. humeropictus up to 48 h. The antifungal tests against M. perniciosa resulted in a minimum inhibitory concentration of 250 µg·mL -1 , and the P 1000 system produced growth inhibition up to 7 days. The developed system has potential as alternative controlling agent, due to its physical stability, particle surface microtexture, as well as pronounced bioactivity of the encapsulated essential oil.

Considerable efforts have been spent on environmentally friendly particles for the encapsulation of essential oils. Polymeric particles were developed to encapsulate the essential oil from Piper nigrum based on gelatin and poly- ε -caprolactone (PCL) carriers. Gas Chromatography ((Flame Ionization Detection (GC/FID) and Mass Spectrometry (GC/MS)), Atomic Force Microscopy (AFM), Nanoparticle Tracking Analysis (NTA), Confocal Laser Scanning Microscopy (CLSM), Attenuated Total Reflectance-Fourier-transform Infrared Spectroscopy (ATR-FTIR), and Ultraviolet-Visible (UV-VIS) spectroscopy were used for the full colloidal system characterization. The essential oil was mainly composed of β -caryophyllene (~35%). The stability of the encapsulated systems was evaluated by Encapsulation Efficiency (EE%), electrical conductivity, turbidity, pH, and organoleptic properties (color and odor) after adding different preservatives. The mixture of phenoxyethanol/isotialzoni-3-one (PNE system) resulted in enhanced stability of approximately 120 and 210 days under constant handling and shelf-life tests, respectively. The developed polymeric system presented a similar controlled release in acidic, neutral, or basic pH, and the release curves suggested a pulsatile release mechanism due to a complexation of essential oil in the PCL matrix. Our results showed that the developed system has potential as an alternative stable product and as a controlling agent, due to the pronounced bioactivity of the encapsulated essential oil.

The objective of this work was to develop biodegradable films by mixing gelatin/carboxymethylcellulose (FG/CMC) and gelatin/polyvinyl alcohol (FG/PVOH) and to evaluate the effect of adding these polymers on the properties of fish gelatin films. The films FG/CMC and FG/PVOH were produced in the proportions 90/10, 80/20 and 70/30 and characterized their physical, chemical and functional properties. The addition of CMC and PVOH improved the mechanical strength, barrier property and water solubility of gelatin films. FG/CMC films showed greater tensile strength and greater solubility than FG/PVOH. The maximum concentration of CMC promoted the highest mechanical resistance, while the highest PVOH content produced the film with the lowest solubility. The proposed mixing systems proved to be adequate to improve the properties of fish gelatin films, with potential for application in the packaging sector., (© 2022. The Author(s).)

Poly( o -methoxyaniline) emeraldine-salt form (ES-POMA) was chemically synthesized using hydrochloric acid and subjected to a heat treatment (HT) process for 1 h at 100 °C (TT 100 ) and 200 °C (TT 200 ). The HT process promoted a progressive decrease in crystallinity. The Le Bail method revealed a decomposition from tetrameric to trimeric-folded chains after the HT process. The unheated POMA-ES presented a globular vesicular morphology with varied micrometric sizes. The heat treatment promoted a reduction in these globular structures, increasing the non-crystalline phase. The boundary length (S) and connectivity/Euler feature (χ) parameters were calculated from the SEM images, revealing that ES-POMA presented a wide distribution of heights. The TT 100 and TT 200 presented a narrow boundary distribution, suggesting smoother surfaces with smaller height variations. The UV-VIS analysis revealed that the transition at 343 nm (nonlocal π → π* ) was more intense in the TT 200 due to the electronic delocalization, which resulted from the reduced polymer chain caused by the HT process. In addition to the loss of conjugation, counter ion withdrawal reduced the ion-chain interaction, decreasing the local electron density. This result shows the influence of the chlorine counter ions on the peaks position related to the HOMO → LUMO transition, since the π → polaron transition occurs due to the creation of the energy states due to the presence of counter ions. Finally, the electrical conductivity decreased after the HT process from 1.4 × 10 -4 S.cm -1 to 2.4 × 10 -6 S.cm -1 as result of the polymer deprotonation/degradation. Thus, this paper proposed a systematic evaluation of the POMA molecular structure and crystallite size and shape after heat treatment.

Background and Aim: carcinoembryonic antigen (CEA) is a biomarker commonly used in colorectal cancer. However, its prognostic value is still controversial. Recent studies demonstrate that CEA produced locally by tumor cells has a higher prognostic value compared to serum CEA. This study aimed to determine whether there was an association between the CEA/tumor size ratio (CEA/ExT) and the pathological tumor response in patients with rectal adenocarcinoma (ADC), who underwent neoadjuvant chemoradiotherapy (N-CRT), followed by surgical tumor resection., Methods: a retrospective study was performed of rectal ADC patients who underwent N-CRT followed by curative surgery between March/2012 and October/2017. CEA and tumor extension for pre-treatment CEA/ExT calculation and the pathological response in the surgical specimen after treatment were analyzed., Results: eighty-nine patients were included, 60.7 % were male and the mean age was 63.8 ± 10.42. There was a good response to N-CRT in 41.6 % of the patients, tumor downstaging occurred in 83.1 % and a complete pathological response in 23.6 % of cases. The average CEA/ExT was 2.01 ng/ml/cm. In the univariate analysis, higher CEA/ExT values were related to a lower frequency of pathological response (p = 0.04) and to a lower frequency of tumor downstaging (p = 0.02). In the multivariate analysis, CEA/ExT was independently related to tumor downstaging (OR: 0.72; 95 % IC: 0.53-0.98, p-0.036)., Conclusions: lower pre-treatment CEA/ExT values seem to be associated with tumor downstaging and this parameter may be a promising predictor of a more favorable response in patients with rectal ADC undergoing treatment with N-CRT.

Tubers and roots have been used in human nutrition since ancient times once they are resistant to pests and easy to grow even in soils poor in nutrients. The most consumed include cassava, potatoes, taro, and yam. In many regions, they are the main source of energy, which has led to industrial-scale cultivation of some such as yacon, burdock, Jerusalem and artichoke, known as sources of fructooligosaccharides, due to the increased demand for prebiotic fibers and the need for lower energy foods. This chapter will present a general approach to tubers and roots and their important role in human nutrition. At the end of the chapter, those recognized as prebiotics and the processing methods for extracting fibers will be discussed., (© 2020 Elsevier Inc. All rights reserved.)

Quality parameters of açai juice processed with ultrasound-assisted, ozone and the combined methods were analyzed in this work. Two ultrasound energy densities (350 and 700 J·mL -1 ) and two ozonization times (5 and 10 min with 1.5 ppm) were analyzed for pure açai juice and 8 different treatments (2 2 complete factorial). To evaluate the quality parameters of the juice, physical-chemical analyzes such as pH, titratable acidity, cloud value, non-enzymatic browning, rheology, antioxidant activity (DPPH and ABTS), phenolic compounds, anthocyanins, enzymatic activity (peroxidase and polyphenol oxidase) and microbial counts (mesophilic bacteria, molds and yeasts) were conducted. The treatments with ozone were better for microbial inactivation and the ultrasound for enzymatic inactivation. In general, the use of non-thermal methods can be a good alternative for the processing of açai juice., (Copyright © 2018 Elsevier Ltd. All rights reserved.)