Search

Complex biologicalmatrices can be effectively removed in the analyte migration process because of their weak solubility in organic solvents. This technique offers other potential advantages, including high-sensitivity and the capability of performing a direct analysis of the components and their metabolites in small-volume raw samples without any pretreatment. [ABSTRACT FROM AUTHOR]

Selective activation of benzene has been mainly limited to the C-H activation. Simple replacement of one carbon in benzene with another atom remains unresolved due to the high dissociation energy. Herein, we demonstrate a direct breakage of the particularly strong C=C bond in benzene through ion-molecule reaction in a low-temperature plasma, in which one carbon atom was replaced by one atomic nitrogen with the formation of pyridine. The mechanism for the formation of pyridine from benzene has been proposed based on the extensive investigation with tandem mass spectrometry. The reaction pathway also works to other aromatics such as toluene and o-xylene. This finding provides a new avenue for selective conversion of aromatics into nitrogen-containing compounds. [ABSTRACT FROM AUTHOR]

The method for the localization of bioactive molecules in plants is highly needed since it provides a fundamental prerequisite for understanding their physiological and ecological functions. Here, we propose a simple method termed in vivo nanoelectrospray for the localization of bioactive molecules in plants without sample preparation. A capillary is partly inserted into the plant to sample liquid from a highly located region, and then, a high voltage is applied to the plant to generate an electrospray from the capillary tip for mass spectrometry analysis. Using this method, bioactive molecules such as saccharides, glycoalkaloids, flavonoids, organic acids, and glucosinolates (GLs) are detected in the target regions of living plants or fresh fruits. Original information for endogenous chemicals including liable molecules in plant can be obtained. A sketchy three-dimensional distribution of glycoalkaloids in a cherry tomato has been obtained. The present work provides a powerful tool for the study of bioactive molecules in a living plant by mass spectrometry. [ABSTRACT FROM AUTHOR]

A novel ionization device for controlling the charge states of peptides based on an inductive elecrospray ionization technique was developed. This ion source keeps the major capabilities of electrospray ionization (ESI) which is compatible with liquid separation techniques (such as liquid chromatography (LC) and capillary electrophoresis (CE)) and can be potentially used to control the charge states of peptides accurately by simply varying the AC voltage applied. In comparison with conventional ESI, inductive ESI successfully simplifies the mass spectrum by reducing the charge states of peptide to a singly charged one, as well as eliminating the adductions. [ABSTRACT FROM AUTHOR]

A simple and fast (<5 s) method for in situarsenic speciation on solid surfaces has been developed based on desorption electrospray ionization-tandem mass spectrometry (DESI-MS). Arsenic-polluted environmental samples such as animal feed and plant tissues could be directly monitored by DESI-MS. Each arsenic species in this study, including monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), arsenocholine (AsC), 4-arsanilic acid (p-ASA), 4-hydroxyphenylarsonic acid (4-OH), Nitarsone, Roxarsone and two inorganic arsenic species, arsenate As(v) and arsenite As(iii), could be detected by their typical m/zand collision induced dissociation (CID) behavior respectively. By the characteristic information, mixtures of different arsenic species could be detected without any sample preparation and separation process. This method could give absolute detection limits of the arsenic species at ng/mm2to pg/mm2level with a best RSD of 5.3% (n= 5). The method could be potentially applied to in situenvironmental monitoring of arsenic pollution, especially that caused by arsenic pesticides, animal feed additives, herbicides and wood treatment. [ABSTRACT FROM AUTHOR]

A high-throughput method for rapid screening of active ingredients in drugs has been developed with mass spectrometry coupled to a low-temperature plasma (LTP) probe ion source. Without sample preparation or pretreatment, the active ingredients of 11 types of commercial pharmaceuticals, including hormones, antipyretic analgesics, cardiovascular, digestant, neuro-psychotherapeutic, diuretic, antithyroid, sulfa anti-inflammatory, antiparastic, sedative-hypnotics, and antibacterial, were directly desorbed/ionized and detected by a linear ion trap mass spectrometry (MS). The structures of these ingredients were elucidated by tandem MS. The analysis of 18 methyltestosterone tablets could be accomplished within 1.9 min, which allows fast detection with a speed of approximate 600 samples within 1 h. This work demonstrated that LTP probe ion source combined with MS is a high-throughput method for screening of pharmaceuticals and potentially applied to on-line quality control in pharmaceutical industry. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Real-time and in-situmonitoring of ongoing chemical reactions by mass spectrometry was achieved by simply directing the low-temperature plasma (LTP) to the surface of the reaction system for analyte desorption and ionization without any sample pretreatment. [ABSTRACT FROM AUTHOR]

High-throughput screening of catalysts could dramatically improve performance and reduce costs in the discovery and study of various catalysts. Here we report a cataluminescence-based array imaging as a high-throughput screening technique in the combinatorial discovery of active catalysts for CO oxidation. This strategy is based on the fact that the CO oxidation generates cataluminescence emission on the surface of nanomaterials, whose intensity is correlated to the activity of the catalyst. To demonstrate the feasibility of the cataluminescence-based array imaging for high-throughput screening of catalysts, different nanosized metal catalysts supported on TiO2 nanoparticles were prepared. These catalysts include monometallic Au, Pt, and the bimetallic Au-Pt heteroaggregate catalysts, at total metal loadings of 0.5%, 1.0%, and 2.5%, and with atomic ratios of 1:1, 1:2, and 2:1 (Au/Pt). A 4 × 4 array was integrated by depositing these nanosized catalysts onto the ceramic chip, and the brightness of each spot in the image was recorded. The catalytic activities of those catalysts for the CO oxidation were evaluated parallelly by both the cataluininescence imaging and the gas chromatography method. The correlation coefficient is 0.9 14 for the two techniques, indicating that the cataluminescence imaging technique can be applied for the evaluation of the catalytic activities. Moreover, fast evaluation of multiple catalysts at a series of working temperature can be achieved by this cataluininescene-based array imaging. With the development of nanotechnology as well as the catalyst industry, the cataluminescence-based array imaging will address its importance in the high-throughput screening of catalysts. [ABSTRACT FROM AUTHOR]

In this paper, we have constructed a low temperature plasma (LTP) probe using dielectric barrier discharge (DBD) and employed it for the detection of explosives on a variety of substrates under ambient conditions. Upon discharge, a transient, low-temperature non-equilibrium plasma comprising ions, electrons and metastable atoms are generated between the electrodes. Three common explosives, 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-trinitro-1,3,5-triazine (RDX), and pentaerythritol tetranitrate (PETN), were directly desorbed and ionized from solid surfaces, followed by subsequent analysis using the mass spectrometer in the negative ion mode. Limits of detection (LODs) were 500 fg for TNT, 1 pg for RDX, and 500 fg for PETN. The reliability of the method was characterized by a successful analysis of a mixture of the three explosives. The ion source also allowed direct detection of trace explosives on both conductive and non-conductive substrates, thus expanding the applicability of low temperature plasma desorption mass spectrometry. [ABSTRACT FROM AUTHOR]

Inductively coupled plasma mass spectrometry (ICPMS) has been successfully used for the detection of element-tagged biomolecules with the advantage of multielement capability. However, this technique cannot be used for microarray detection due to the necessity to dissolve the elemental tags before introducing them to the plasma source. Here, we report the detection of multiple proteins on each spot of the immuno-microarray by laser ablation ICPMS. α-Fetoprotein IgG (AFP), carcinoembryonic antigen (CEA), and human IgG, as model proteins, have been detected on the basis of sandwich-type immunoreactions on a microarray with Sm3+-labeled AFP antibody, Eu3+-labeled CEA antibody, and Au-labeled goat-anti-human IgG (GAB) as labeled antibodies. The detection limits were 0.20, 0.14, and 0.0 12 ng mL-1 (3σ) with the RSD of 5.7%, 2.6%, and 2.3% at the concentration of 1.0 ng mL-1 for AFP, CEA, and human IgG, respectively. The present detection method permits detecting multiple analytes from each spot of microarray with a spatial resolution at micrometer range, which can alleviate the stress to fabricate high-density arrays. Furthermore, the substrate materials and immobilized proteins do not interfere with the detection. The present technique provides a new strategy for readout of microarray. [ABSTRACT FROM AUTHOR]

This paper reports the synthesis of semiconductor nanocrystals of PbSthrough a facile and inexpensive synthetic route between lead acetate[Pb(Ac)23H2O] anddithioglycol (HSCH2CH2SH) without any surfactant. The products were characterized by x-ray diffraction (XRD),transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Ramanspectroscopy, x-ray photelectron spectroscopy (XPS) and infrared (IR) spectroscopy. Thesize of cube-shaped PbS nanocrystals can be controlled by changing the relative amount ofPb(Ac)23H2O and dithioglycol. Smaller cube-shaped PbS nanocrystals were obtained at higher sulfurcontent in the reaction system. The nanometre-sized single crystals of PbS measure∼83nm 59nm 22nm and 39nm 10nm 7nm, for lead acetate:dithioglycol ratios of 1:0.375 (denoted as PbS-1) and1:1.5 (denoted as PbS-2), respectively, when a mixture of NaOH solutionof lead acetate and ethyl alcohol solution of dithioglycol is maintained at220 C for 4h in a Teflon-lined autoclave. XRD patterns and HRTEM images confirm thecrystalline structure of the PbS crystals. TEM helped to determine the dimension of thesingle crystals. Raman, XPS and IR helped to further demonstrate the purity of theas-synthesized samples. The optical absorption spectra of suspensions of the thesecrystals in glycol show shifts in absorption band edge for as-prepared sample PbS-1from 246 to 271nm and for PbS-2 from 246 to 275nm, after four days of storage,respectively. The photoluminescence peaks from the two samples are located at 434 and433nm for photoexcitation radiation of 315–355nm, thus exhibiting a Stokes shiftcompared with band edge energy. The principal contribution of this work is that thenanometre-size PbS single crystals are prepared without using a surfactant ortemplating agent. The formation of a five-membered ring via the chelation between thePb2+ ion and dithioglycol is considered to be crucial in this mechanism. [ABSTRACT FROM AUTHOR]

This paper describes a novel hydride atomizer based on atmospheric pressure dielectric barrier discharge (DBD) plasma. The plasma was generated with a 3700-V, 20.3-kHz, and 5-W electrical power supply and easily sustained with inert gases (He or Ar) at a flow rate of 250 mL.min-1 after optimization. However, it cannot be sustained with N2. This atomizer offers the advantages of low operation temperature and low power consumption in comparison with the currently used electrothermal quartz atomization operated at 900 °C with a power supply of several hundred watts. To confirm the utility of the proposed atomizer, four arsenic species (As(III), As(V), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA)) were determined by the present atomization technique. A hyphenation of HPLC coupled to hydride generation MS with the optimized DBD atomizer has been successfully used for the speciation of arsenic in order to demonstrate the potential of this atomizer in the present study. The characteristics of the DBD atomizer and the effects of different parameters (discharge gas, gas flow rate, voltage, HCI concentration, KBH4 concentration) are discussed in the paper. Compared with other hydride atomization techniques, the proposed method shows the following features: (1) small size (70 mm x 15 mm x 5 mm), which is preferable for the miniaturization of the total analytical system; (2) low power consumption (⩽ 5W), which indicates the possibility of the development of portable, fieldable analytical instrumentation for in situ detection using battery as power supply; (3) low atomizer temperature (∼70 °C), which is in favor of the compactness of the total instruments; (4) avoidance of residue moisture removal in comparison with the existed GD system, which leads to the facility of the system. The analytical figures of the present technique were evaluated. The detection limits of As(III), As(V), MMA, and DMA obtained with HG-DBD-AAS were 1.0, 11.8, 2.0, and 18.0 μg.L-1, respectively. The accuracy of the system was verified by the determination of arsenic in reference material of orchard leaves SRM 1571. The concentration of As determined by the present method agreed well with the reference values. The speciation of arsenic in the freeze-dried urine SRM 2670 were carried out, and the results obtained were in agreement with the results of HPLC-ICPMS and the reported values by other laboratories. [ABSTRACT FROM AUTHOR]

This paper reports the synthesis of semiconductor ZnSe microspheres composed of nanoparticles via a solvothermal route between the organic molecule selenophene (C4H4 Se) and ZnCl2 without adding any surfactant. The ZnSe microspheres were characterized by x-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), specific surface area measurement, and photoluminescence (PL) spectra. A strong and broad blue PL emission at 443 nm in wavelength ([?]2.79 eV in photon energy) is attributed to the near-band-edge (NBE) emission of ZnSe, while the 530 nm peak is a defect-related (DL) emission. The photocatalytic activity of the as-prepared ZnSe microspheres was evaluated by photodegradation of methyl orange (MO) dye under ultraviolet (UV) light and visible light irradiation. The degradations of MO reach 94% or 95.1%, close to 100%, in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 7 or 10 h under UV irradiation, respectively. Meanwhile the degradations of MO reach 94.3% or 60.6% in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 12 h, respectively. The degradation rate of ZnSe microspheres is twice that of ZnSe commercial powder under UV light irradiation, and three times under visible light irradiation. The degradation process of MO dye on ZnSe microspheres under UV or visible light is also discussed. [ABSTRACT FROM AUTHOR]

A novel aerosol chemiluminescent (CL) detector coupling to capillary electrophoresis (CE) for the detection of saccharides is reported. This CL detector is composed of a postcapillary nebulizer and porous alumina as catalyzer in quartz tube. The CL emission could be generated due to the catalyzing oxidization of saccharides on the surface of porous alumina. The saccharides such as sucrose, α-lactose, maltose, raffinose, galactose, xylose, and glucose with only weak UV absorbance can be successfully detected. The linear ranges of those saccharides are from 30-2000 to 50-2000 mg/L; relative standard deviations range from 2.1 to 3.7% (200 mg/L, n = 11). Compared with the traditional UV detector currently used in CE, this novel detector shows the advantage of high sensitivity to the compounds with only weak UV absorption. Thus, it could be an important supplement of CE detectors for UV- lacking compounds. [ABSTRACT FROM AUTHOR]