Search

Droplet digital PCR (ddPCR) is recognized as a high-precision method for nucleic acid quantification, extensively utilized in biomedical research and clinical diagnostics. This technique employs microfluidic technology to partition the nucleic acid-containing reaction mixture into discrete droplets for amplification, achieving absolute quantification by identifying and enumerating the number of fluorescent droplets. The accuracy of droplet quantification is pivotal to the success of the assay. However, current image-processing tools are operationally complex, and commercial instruments are costly. Moreover, the designed algorithms exhibit a need for enhanced accuracy and are often restricted to use by trained personnel with specific microscopy equipment. In response to these challenges, we introduce an automated device (A-MMD), capable of detecting fluorescent droplets in ddPCR images captured by multiple microscopes. The device integrates three distinct algorithms tailored for the image processing of Laser Scanning Confocal Microscopy (LSCM), inverted microscopy, and self-assembled microscopy. Experimental validation using λ DNA demonstrated a 100.00% identification rate for positive droplets across all three image types, and the average identification rates for total droplets being 99.27% for LSCM, 98.96% for inverted microscopy, and 99.08% for self-assembled microscopy. Furthermore, the A-MMD is equipped with a user-friendly interface (UI) that streamlines the operational process, enabling non-specialists to efficiently perform droplet detection tasks. Our device not only has good environmental adaptability and identification accuracy, but also significantly reduces costs and operational complexity. It offers an economical, efficient, and user-friendly solution for ddPCR image analysis, thereby further propelling the advancement and application of nucleic acid detection technology. [ABSTRACT FROM AUTHOR]

Background: Dual-energy computed tomography (DECT) is a noninvasive diagnostic tool for gouty arthritis. This study aimed to compare two postprocessing techniques for monosodium urate (MSU) detection: conventional two-material decomposition and material map-based decomposition. Methods: A raster phantom and an ex vivo biophantom, embedded with four different MSU concentrations, were scanned in two high-end CT scanners. Scanner 1 used the conventional postprocessing method while scanner 2 employed the material map approach. Volumetric analysis was performed to determine MSU detection, and image quality parameters, such as signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR), were computed. Results: The material map-based method demonstrated superior MSU detection. Specifically, scanner 2 yielded total MSU volumes of 5.29 ± 0.28 mL and 4.52 ± 0.29 mL (mean ± standard deviation) in the raster and biophantom, respectively, versus 2.35 ± 0.23 mL and 1.15 ± 0.17 mL for scanner 1. Radiation dose correlated positively with detection for the conventional scanner, while there was no such correlation for the material map-based decomposition method in the biophantom. Despite its higher detection rate, material map-based decomposition was inferior in terms of SNR, CNR, and artifacts. Conclusion: While material map-based decomposition resulted in superior MSU detection, it is limited by challenges such as increased artifacts. Our findings highlight the potential of this method for gout diagnosis while underscoring the need for further research to enhance its clinical reliability. Relevance statement: Advanced postprocessing such as material-map-based two-material decomposition might improve the sensitivity for gouty arthritis in clinical practice, thus, allowing for lower radiation doses or better sensitivity for gouty tophi. Key Points: Dual-energy CT showed limited sensitivity for tophi with low MSU concentrations. Materiel-map-based decomposition increased sensitivity compared to conventional two-material decomposition. The advantages of material-map-based decomposition outweigh lower image quality and increased artifact load. [ABSTRACT FROM AUTHOR]

The grading of products is important in many ways. One of the important activities after harvesting agricultural products is product grading based on shape and color dimensions. This activity in the agricultural transformation industries, Bas Controller, improves various processes on fruits and vegetables with the same dimensions, which improves the storage conditions of the product, creates added value for the farmer, and gives the consumer the power to choose. The main focus of this study is the application of image processing in the field of identification and classification of fruits. It is an application that has received much less attention than other applications of image processing. The proposed systems presented in this article, are software solutions based on image processing techniques, including histogram matching techniques, for detection, Sable edge detection algorithms, Private edge and Kenny edge, Otsu threshold limit, and clustering method It is an automatic mean and classification of different degrees of fruit. In addition, it has been mentioned more about the examination and description of product grading and clustering methods, that by using the proposed application hardware and its connection with the software, a big step can be taken in product quality grading. This method can be used in product classification and packaging. The accuracy rate for peaches, lemons, apples, and tomatoes is 94.58%, 88.23%, 70%, and 93.33%, respectively. The best accuracy for all 20 sample levels is for peach fruit. [ABSTRACT FROM AUTHOR]

The paper focuses on the seasonal oil accumulation in traditional and super-high density (SHD) olive plantations and its modelling employing image-based linear models. For these purposes, at 7-10-day intervals, fruit samples (cultivar Arbequina, Fasola, Frantoio, Koroneiki, Leccino, Maiatica) were pictured and images segmented to extract the Red (R), Green (G), and Blue (B) mean pixel values which were re-arranged in 35 RGB-derived colorimetric indexes (CIs). After imaging, the samples were crushed and oil concentration was determined (NIR). The analysis of the correlation between oil and CIs revealed a differential hysteretic behavior depending on the covariates (CI and cultivar). The hysteresis area (Hyst) was then quantified and used to rank the CIs under the hypothesis that CIs with the maximum or minimum Hyst had the highest correlation coefficient and were the most suitable predictors within a general linear model. The results show that the predictors selected according to Hyst-based criteria had high accuracy as determined using a Global Performance Indicator (GPI) accounting for various performance metrics (R 2, RSME, MAE). The use of a general linear model here presented is a new computational option integrating current methods mostly based on artificial neural networks. RGB-based image phenotyping can effectively predict key quality traits in olive fruit supporting the transition of the olive sector towards a digital agriculture domain. [ABSTRACT FROM AUTHOR]

Background: Somatostatin receptor (SSR) targeting radiotracer 68Ga-DOTATATE is used for Positron Emission Tomography (PET)/Computed Tomography (CT) imaging to assess patients with Pheochromocytoma and paraganglioma (PPGL), rare types of Neuroendocrine tumor (NET) which can metastasize thereby becoming difficult to quantify. The goal of this study is to develop an artificial intelligence (AI) model for automated lesion segmentation on whole-body 3D DOTATATE-PET/CT and to automate the tumor burden calculation. 132 68Ga-DOTATATE PET/CT scans from 38 patients with metastatic and inoperable PPGL, were split into 70, and 62 scans, from 20, and 18 patients for training, and test sets, respectively. The training set was further divided into patient-stratified 5 folds for cross-validation. 3D-full resolution nnUNet configuration was trained with 5-fold cross-validation. The model's detection performance was evaluated at both scan and lesion levels for the PPGL test set and two other clinical cohorts with NET (n = 9) and olfactory neuroblastoma (ONB, n = 5). Additionally, quantitative statistical analysis of PET parameters including SUVmax, total lesion uptake (TLU), and total tumor volume (TTV), was conducted. Results: The nnUNet AI model achieved an average 5-fold validation dice similarity coefficient of 0.84 at the scan level. The model achieved dice similarity coefficients (DSC) of 0.88, 0.6, and 0.67 at the scan level, the sensitivity of 86%, 61.13%, and 61.64%, and a positive predictive value of 89%, 74%, and 86.54% at the lesion level for the PPGL test, NET and ONB cohorts, respectively. For PPGL cohorts, smaller lesions with low uptake were missed by the AI model (p < 0.001). Anatomical region-based failure analysis showed most of the false negative and false positive lesions within the liver for all the cohorts, mainly due to the high physiologic liver background activity and image noise on 68Ga- DOTATATE PET scans. Conclusions: The developed deep learning-based AI model showed reliable performance for automated segmentation of metastatic PPGL lesions on whole-body 68Ga-DOTATATE-PET/CT images, which may be beneficial for tumor burden estimation for objective evaluation during therapy follow-up. https://www.clinicaltrials.gov/study/NCT03206060, https://www.clinicaltrials.gov/study/NCT04086485, https://www.clinicaltrials.gov/study/NCT05012098. [ABSTRACT FROM AUTHOR]

Ferroelectric photoelectric devices show promising applications in artificial vision systems. However, this type of devices used in artificial vision systems exhibits low photoresponsivity and this limited cyclability of photocurrents, which hinders the progress of artificial vision systems. In this study, an artificial vision system is constructed with high photoresponsivity, fast photoresponse speed, and high read/write speed based on the Pd/PbZr0.4Ti0.6O3/La0.3Sr0.7MnO3/LaAlO3 ferroelectric photomemristor. The high optical response (18.86 nanoamperes) and read/write speeds (50 nanoseconds) of the device significantly improve the robustness and speed of the neuromorphic visual system while reducing power consumption for recognition. The artificial vision system developed in this study provides excellent real‐time image processing capabilities, including edge detection and classification with 100% accuracy for musical key patterns, and it is expected to offer great potential for the development of high‐performance self‐powered artificial vision systems. [ABSTRACT FROM AUTHOR]

White blood cells (WBCs) are crucial components of the immune system, responsible for detecting and eliminating pathogens. Accurate detection and classification of WBCs are essential for various clinical diagnostics. This study aims to develop an AI framework for detecting and classifying WBCs from microscopic images using a customized YOLOv5 model with three key modifications. Firstly, the C3 module in YOLOv5's backbone is replaced with the innovative C3TR structure to enhance feature extraction and reduce background noise. Secondly, the BiFPN is integrated into the neck to improve feature localization and discrimination. Thirdly, an additional layer in the head enhances detection of small WBCs. Experiments on the BCCD dataset, comprising 352 microscopic blood smear images with leukocytes, demonstrated the framework's superiority over state‐of‐the‐art methods, achieving 99.4% accuracy. Furthermore, the model exhibits computational efficiency, operating over five times faster than existing YOLO models. These findings underscore the framework's promise in medical diagnostics, showcasing deep learning's supremacy in automated cell classification. [ABSTRACT FROM AUTHOR]

This study investigates the integration of quantum computing, classical methods, and deep learning techniques for enhanced image processing in dynamic 6G networks, while also addressing essential aspects of copyright technology and detection. Our findings indicate that quantum methods excel in rapid edge detection and feature extraction but encounter difficulties in maintaining image quality compared to classical approaches. In contrast, classical methods preserve higher image fidelity but struggle to satisfy the real-time processing requirements of 6G applications. Deep learning techniques, particularly CNNs, demonstrate potential in complex image analysis tasks but demand substantial computational resources. To promote the ethical use of AI-generated images, we introduce copyright detection mechanisms that employ advanced algorithms to identify potential infringements in generated content. This integration improves adherence to intellectual property rights and legal standards, supporting the responsible implementation of image processing technologies. We suggest that the future of image processing in 6G networks resides in hybrid systems that effectively utilize the strengths of each approach while incorporating robust copyright detection capabilities. These insights contribute to the development of efficient, high-performance image processing systems in next-generation networks, highlighting the promise of integrated quantum-classical–classical deep learning architectures within 6G environments. [ABSTRACT FROM AUTHOR]

The evolution of low-cost embedded systems is growing exponentially; likewise, their use in robotics applications aims to achieve critical task execution by implementing sophisticated control and computer vision algorithms. We review the state-of-the-art strategies available for Tiny Machine Learning (TinyML) implementation to provide a complete overview using various existing embedded vision and control systems. Our discussion divides the article into four critical aspects that high-cost and low-cost embedded systems must include to execute real-time control and image processing tasks, applying TinyML techniques: Hardware Architecture, Vision System, Power Consumption, and Embedded Software Platform development environment. The advantages and disadvantages of the reviewed systems are presented. Subsequently, the perspectives of them for the next ten years are present. A basic TinyML implementation for embedded vision application using three low-cost embedded systems, Raspberry Pi Pico, ESP32, and Arduino Nano 33 BLE Sense, is presented for performance analysis. [ABSTRACT FROM AUTHOR]

In this study, we developed a MATLAB 2024a toolbox that performs advanced algebraic calculations in the algebra of elliptic numbers and elliptic quaternions. Additionally, we introduce color image processing methods, such as principal component analysis, image compression, image restoration, and watermarking, based on singular-value decomposition theory for elliptic quaternion matrices; we added these to the newly developed toolbox. The experimental results demonstrate that elliptic quaternionic methods yield better image analysis and processing performance compared to other hypercomplex number-based methods. [ABSTRACT FROM AUTHOR]

To locate and read the complex pointer meter dial for the images with uneven illumination, blurred dial, and tilted dial, this paper firstly proposes an improved BRISK‐FREAK algorithm for dial position. Then, combined with the Line Segment Detector (LSD) algorithm, an automatic identification method for complex pointer meter is proposed. The dial of a large number of SF6 complex pressure pointer meter images are located and the results reveal that the proposed improved BRISK‐FREAK algorithm has good adaptability under strong interference. The computational speed of the proposed algorithm is 33% and 17% higher than the Scale‐Invariant Feature Transform (SIFT) algorithm and the Binary Robust Invariant Scalable Keypoints (BRISK) algorithm respectively. The positioning success rate of the proposed algorithm is 40%, 64%, and 32% higher than that of the SIFT, Oriented FAST and Rotated BRIEF (ORB) and BRISK algorithms respectively. The reading success rate of the proposed method is 94.5%, which is 19.5%, 39.9% and 14.8% higher than that of the methods based on the ORB, SIFT and BRISK algorithms respectively. It is particularly suitable for application in the actual substations to realize the identification of complex pointer meters. [ABSTRACT FROM AUTHOR]

This study introduces OpenMAP‐T1, a deep‐learning‐based method for rapid and accurate whole‐brain parcellation in T1‐ weighted brain MRI, which aims to overcome the limitations of conventional normalization‐to‐atlas‐based approaches and multi‐atlas label‐fusion (MALF) techniques. Brain image parcellation is a fundamental process in neuroscientific and clinical research, enabling a detailed analysis of specific cerebral regions. Normalization‐to‐atlas‐based methods have been employed for this task, but they face limitations due to variations in brain morphology, especially in pathological conditions. The MALF techniques improved the accuracy of the image parcellation and robustness to variations in brain morphology, but at the cost of high computational demand that requires a lengthy processing time. OpenMAP‐T1 integrates several convolutional neural network models across six phases: preprocessing; cropping; skull‐stripping; parcellation; hemisphere segmentation; and final merging. This process involves standardizing MRI images, isolating the brain tissue, and parcellating it into 280 anatomical structures that cover the whole brain, including detailed gray and white matter structures, while simplifying the parcellation processes and incorporating robust training to handle various scan types and conditions. The OpenMAP‐T1 was validated on the Johns Hopkins University atlas library and eight available open resources, including real‐world clinical images, and the demonstration of robustness across different datasets with variations in scanner types, magnetic field strengths, and image processing techniques, such as defacing. Compared with existing methods, OpenMAP‐T1 significantly reduced the processing time per image from several hours to less than 90 s without compromising accuracy. It was particularly effective in handling images with intensity inhomogeneity and varying head positions, conditions commonly seen in clinical settings. The adaptability of OpenMAP‐T1 to a wide range of MRI datasets and its robustness to various scan conditions highlight its potential as a versatile tool in neuroimaging. [ABSTRACT FROM AUTHOR]

This study presents a new method for simultaneous determination of fenoterol, procaterol, clenbuterol, terbutaline and isoprenaline drugs using thin-layer chromatography assisted by image analysis (HPTLC-IA) combined with sensitive detection modes. Separation of the selected drugs was obtained using HPTLC Silica gel 60 F254 plates and mixture of isopropyl alcohol, ethyl acetate and ammonia (20:25:1.5 v/v/v) as mobile phase. UV detection mode combined with the use of 2,2-diphenyl-1-picrylhydrazyl (DPPH•) and 2,2'-azino-bis (3-ethylbenzothiazoline)-6-sulfonic acid (ABTS+•) radicals were applied for the first time for sensible detection of the separated drugs. Grey, green, red and blue scales respectively were selected for image analysis and accurate quantification of spot area. According to the obtained result, the use of DPPH• and ABTS+• reagents revealed a higher sensitivity in detection and accurate quantification of the analyzed drugs. Lower limit of detection (LOD = 0.07 ± 0.03 µg/spot; 0.09 ± 0.03 µg/spot and 0.10 ± 0.04 µg/spot) was obtained for fenoterol, procaterol and terbutaline using the ABTS+• radical and red scale selection for image processing. With the exception of isoprenaline, the proposed HPTLC-IA method showed a good separation of fenoterol, procaterol, clenbuterol and terbutaline drugs from other compounds in urine samples. Good recovery was obtained for these drugs in spiked urine samples. [ABSTRACT FROM AUTHOR]

About two-thirds of the genes in the Drosophila melanogaster genome are also involved in its eye development, making the Drosophila eye an ideal system for genetic studies. We previously developed Flynotyper, a software that uses image processing operations to identify and quantify the degree of roughness by measuring disorderliness of ommatidial arrangement in the fly eye. This software has enabled researchers to quantify morphological defects of thousands of eye images caused by genetic perturbations. Here, we present Flynotyper 2.0, a software that has an updated computer vision library, improved performance, and a streamlined pipeline for high-throughput analysis of multiple eye images. We also tested several batches of Drosophila eye images to ensure robustness and reproducibility of the updated Flynotyper 2.0 software. [ABSTRACT FROM AUTHOR]

Jujube is susceptible to biotic and abiotic adversity stresses resulting in abnormal phenotypic defects. Therefore, abnormal phenotype fruits should be removed during postharvest sorting to increase added value. An improved maximum horizontal diameter linear regression (MHD‐LR) method for size grading of jujube prior to detection of abnormal phenotypic defects was developed. The accuracy of the MHD‐LR model is 95%, with an error of only 0.95 mm. In addition, a method for detecting abnormal phenotypic defects in jujube was established. It can effectively and accurately classify seven kinds of jujube phenotypes (regular, irregular, wrinkled, moldy, hole‐broken, skin‐broken, and scarred). The data augmentation method based on linear interpolation can effectively expand the dataset with a variance of only 0.0006. Support vector machine‐decision tree (SVMDT), logistic regression, back propagation neural network, and long short‐term memory network models were established to classify jujube samples with different phenotypes, with accuracies of 99.57%, 99.00%, 99.14%, and 99.29%, respectively. The results showed that the SVMDT model had higher accuracy and explainability. This research is expected to provide a new method to improve the precise classification of abnormal phenotypic defects in postharvest jujube. [ABSTRACT FROM AUTHOR]

The residue number system is widely used in cryptography, digital signal processing, image processing systems, and other areas where high-performance computing is required. One of the main tools used in the residue number system is the Akushsky core function. However, its use is limited due to the existence of so-called critical cores. This study aims to develop Akushsky core functions that effectively eliminate the occurrence of critical cores, thereby enhancing their applicability in real-world scenarios. We introduce a fundamental approach to critical core detection that reduces the average time for critical core detection by 99.48% compared to the brute force algorithm. The results of our analysis indicate not only a substantial improvement in the speed of core detection but also an enhancement in the overall performance of systems utilizing the Akushsky core function. Our findings provide important insights into optimizing residue number systems and encourage further exploration into advanced computational techniques within this domain. [ABSTRACT FROM AUTHOR]

In studying the joint object detection and classification problem for facial expression recognition (FER) deploying the YOLOX framework, we introduce a novel feature extractor, called neighborhood coordinate attention Mamba (NCAMamba) to substitute for the original feature extractor in the Feature Pyramid Network (FPN). NCAMamba combines the background information reduction capabilities of Mamba, the local neighborhood relationship understanding of neighborhood attention, and the directional relationship understanding of coordinate attention. The resulting FER-YOLO-NCAMamba model, when applied to two unaligned FER benchmark datasets, RAF-DB and SFEW, obtains significantly improved mean average precision (mAP) scores when compared with those obtained by other state-of-the-art methods. Moreover, in ablation studies, it is found that the NCA module is relatively more important than the Visual State Space (VSS), a version of using Mamba for image processing, and in visualization studies using the grad-CAM method, it reveals that regions around the nose tip are critical to recognizing the expression; if it is too large, it may lead to erroneous prediction, while a small focused region would lead to correct recognition; this may explain why FER of unaligned faces is such a challenging problem. [ABSTRACT FROM AUTHOR]

The rise of complex high-rise buildings has made building management increasingly challenging, especially the nighttime supervision of university laboratories. Idle occupation increases the risk of accidents and undermines campus sustainability. Effective occupancy detection is essential for optimizing campus building safety and energy efficiency. Environmental sensors for occupancy detection offer limited coverage and are costly, making them unsuitable for campuses. Surveillance cameras, as part of campus infrastructure, provide wide coverage. On this basis, we designed a detection algorithm that uses light brightness to assess nighttime building use. Experimental results showed that the algorithm achieves an average accuracy of 98.67%, enabling large-scale nighttime occupancy detection without the need for installing additional sensors, significantly improving the efficiency of campus building management. In addition, to address the limitations of indoor space representation in geographic information system (GIS) management models, this paper developed a comprehensive 3D GIS model based on a "building–floor–room" hierarchical structure, utilizing oblique photogrammetry and laser scanning technology. This study combined the detection results with real-world 3D data for visualization, providing a new perspective for the 3D spatiotemporal refinement of complex high-rise buildings, and providing a reference framework for the detection and analysis of other types of building environments. [ABSTRACT FROM AUTHOR]

To address the issues of image blurring and color distortion in hazy conditions, an image restoration method based on a parametric analytical modulation transfer function model is proposed under turbid atmospheric conditions. A source database is established using a numerical radiative transfer method based on discrete ordinate. Through multivariate nonlinear fitting and linear interpolation, the quantitative relationships among critical spatial frequency, turbid atmospheric MTF, and key atmospheric optical parameters—such as optical thickness, single scattering albedo, and asymmetry factor—are examined. A fast and efficient parametric analytical MTF model for turbid atmospheres is developed and applied to restore images affected by fog. The results demonstrate that, within the applicable range of the model, the model's maximum mean relative error and the root mean square error are 7.16% and 0.0454, respectively. The computational speed is nearly a thousand times faster than that of the numerical radiative transfer method, achieving high accuracy and ease of application. Images restored using this model exhibit enhanced clarity and quality, effectively compensating for the degradation in image quality caused by turbid atmospheres. This approach represents a novel solution to the challenges of image processing in complex atmospheric environments. [ABSTRACT FROM AUTHOR]

Anomaly detection in hyperspectral imaging is crucial for remote sensing, driving the development of numerous algorithms. However, systematic studies reveal a dichotomy where algorithms generally excel at either detecting anomalies in specific datasets or generalizing across heterogeneous datasets (i.e., lack adaptability). A key source of this dichotomy may center on the singular and like biases frequently employed by existing algorithms. Current research lacks experimentation into how integrating insights from diverse biases might counteract problems in singularly biased approaches. Addressing this gap, we propose stacking-based ensemble learning for hyperspectral anomaly detection (SELHAD). SELHAD introduces the integration of hyperspectral anomaly detection algorithms with diverse biases (e.g., Gaussian, density, partition) into a singular ensemble learning model and learns the factor to which each bias should contribute so anomaly detection performance is optimized. Additionally, it introduces bootstrapping strategies into hyperspectral anomaly detection algorithms to further increase robustness. We focused on five representative algorithms embodying common biases in hyperspectral anomaly detection and demonstrated how they result in the previously highlighted dichotomy. Subsequently, we demonstrated how SELHAD learns the interplay between these biases, enabling their collaborative utilization. In doing so, SELHAD transcends the limitations inherent in individual biases, thereby alleviating the dichotomy and advancing toward more adaptable solutions. [ABSTRACT FROM AUTHOR]

Images taken on rainy days have rain streaks of varying degrees of intensity, which seriously affect the visibility of the background scene. Aiming at the above problems, we propose a rain mark removal algorithm based on the combination of dual-attention mechanism U-Net and multi-convolution. First, we add a double attention mechanism to the encoder of U-Net. It can give different weights to the rain mark features that need to be extracted in different channels and spaces so that sufficient rain mark features can be obtained. With different dilation factors, we can obtain rain mark characteristics of different depths. Secondly, the multi-convolutional channel integrates the characteristics of rain streaks and prepares sufficient rain mark information for the task of clearing rain streaks. By introducing a cyclic rain streaks detection and removal mechanism into the network architecture, it can achieve gradual removal of rain streaks. Even in the case of heavy rain, our algorithm can get good results. Finally, we tested on both synthetic and real datasets to obtain subjective results and objective evaluations. Experimental results show that for the rainy day image de-rain task with different intensities of rain streaks, our algorithm is more robust. Moreover, the ability of our algorithm to remove rain streaks is better than that of the other five different classical algorithms. The de-raining images produced by our algorithm are visually sharper, and its visibility enhancements are effective for computer vision applications (Google Vision API). [ABSTRACT FROM AUTHOR]

The volumetric and hydrological responses of clayey soils subjected to drying-wetting (D-W) cycles are of paramount importance for the integrity of geoenvironmental infrastructures. The study aimed to investigate the cracking behavior of clayey soils under D-W cycles by using advanced 2D imaging and 3D scanning techniques to capture the initiation and propagation of desiccation cracks within a soil specimen. The temporal variation in the soil water content and the corresponding 2D digital photography and 3D morphology of cracks were simultaneously monitored, and the cracking characteristics were interpreted. It was found that the time-dependent evaporation process was independent of the D-W cycles. Both 2D and 3D characterization showed the cracking hysteresis phenomenon in the unsaturated soil, which indicates the dependency of the crack opening and closure on the degree of saturation. D-W cycles led to the formation of subcracks and the increase in the total crack length, reflecting the soil degradation. Additionally, it was demonstrated that the 3D characterization exhibited the advantage of capturing the volumetric change and the subtle change in the macroporosity of the cracked soil over the 2D visualization. The current study provides a perspective of combining 2D and 3D characterization for interpreting the volumetric change of cracked soils and enhancing the understanding of the hydromechanical responses and the soil-atmosphere interactions. [ABSTRACT FROM AUTHOR]

The automatic extraction of bottom sediment annotations in large-scale raster nautical charts has limitations, including an imprecise semantic information description and low efficiency. To overcome them, we propose a convolutional neural network (CNN)-based method for the automatic extraction of bottom sediment annotations in raster nautical charts, using image processing techniques to improve it. First, an adaptive chart partitioning model that considers element completeness is constructed. Second, a principle for the unique identification of elements based on spatial conflicts is designed. Finally, a model for accurately extracting semantic information for bottom sediment annotations is established. To evaluate the effectiveness of the proposed method, we implemented a model based on the PyTorch framework and used the PIL library to analyze the results. We also conducted comparative experiments on multiple CNN models to recommend the selection of such models in the proposed method by comparing their classification and recognition performance. The experimental results indicate that (1) the proposed model can achieve high-precision extraction of bottom sediment annotations in raster nautical charts. (2) Furthermore, the proposed model generally has high recognition accuracy and semantic completeness, with better recognition precision than traditional pattern recognition methods. [ABSTRACT FROM AUTHOR]

Cryogenic electron microscopy (cryoEM) is a rapidly growing structural biology modality that has been successful in revealing molecular details of biological systems. However, unlike established biophysical and analytical techniques with calibration standards, cryoEM has lacked comprehensive biological test samples. Here, a cryoEM calibration sample consisting of a mixture of compatible macromolecules is introduced that can not only be used for resolution optimization, but also provides multiple reference points for evaluating instrument performance, data quality and image‐processing workflows in a single experiment. This combined test specimen provides researchers with a reference point for validating their cryoEM pipeline, benchmarking their methodologies and testing new algorithms. [ABSTRACT FROM AUTHOR]

Background: Medical imaging segmentation is the use of image processing techniques to expand specific structures or areas in medical images. This technique is used to separate and display different textures or shapes in an image. The aim of this study is to develop a deep learning-based method to perform maxillary sinus segmentation using cone beam computed tomography (CBCT) images. The proposed segmentation method aims to provide better image guidance to surgeons and specialists by determining the boundaries of the maxillary sinus cavities. In this way, more accurate diagnoses can be made and surgical interventions can be performed more successfully. Methods: In the study, axial CBCT images of 100 patients (200 maxillary sinuses) were used. These images were marked to identify the maxillary sinus walls. The marked regions are masked for use in the maxillary sinus segmentation model. U-Net, one of the deep learning methods, was used for segmentation. The training process was carried out for 10 epochs and 100 iterations per epoch. The epoch and iteration numbers in which the model showed maximum success were determined using the early stopping method. Results: After the segmentation operations performed with the U-Net model trained using CBCT images, both visual and numerical results were obtained. In order to measure the performance of the U-Net model, IoU (Intersection over Union) and F1 Score metrics were used. As a result of the tests of the model, the IoU value was found to be 0.9275 and the F1 Score value was 0.9784. Conclusion: The U-Net model has shown high success in maxillary sinus segmentation. In this way, fast and highly accurate evaluations are possible, saving time by reducing the workload of clinicians and eliminating subjective errors. [ABSTRACT FROM AUTHOR]

Studies have shown that the morphologies of galaxies are substantially transformed following coalescence after a merger, but post-mergers are notoriously difficult to identify, especially in imaging that is shallow or low resolution. We train convolutional neural networks (CNNs) to identify simulated post-merger galaxies in a range of image qualities, modelled after five real surveys: the Sloan Digital Sky Survey (SDSS), the Dark Energy Camera Legacy Survey (DECaLS), the Canada–France Imaging Survey (CFIS), the Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP), and the Legacy Survey of Space and Time (LSST). Holding constant all variables other than imaging quality, we present the performance of the CNNs on reserved test set data for each image quality. The success of CNNs on a given data set is found to be sensitive to both imaging depth and resolution. We find that post-merger recovery generally increases with depth, but that limiting 5 |$\sigma$| point-source depths in excess of |$\sim 25$| mag, similar to what is achieved in CFIS, are only marginally beneficial. Finally, we present the results of a cross-survey inference experiment, and find that CNNs trained on a given image quality can sometimes be applied to different imaging data to good effect. The work presented here therefore represents a useful reference for the application of CNNs for merger searches in both current and future imaging surveys. [ABSTRACT FROM AUTHOR]

Rapid, accurate, and fully automated estimation of both length and width of asphalt pavement cracks, essential for achieving a proactive asset management, presents a significant challenge, primarily due to limitations in the effectiveness of automatic image segmentation and the accuracy of crack width and length estimation algorithms. To address this challenge, this paper introduces the Branch Growing (BG) algorithm, specifically designed for crack length estimation in asphalt pavements, along with an optimized OrthoBoundary algorithm tailored for crack width estimation. Leveraging four widely adopted deep learning models for asphalt pavement crack segmentation, four distinct sets of image segmentation results have been produced. Subsequently, a comprehensive evaluation has been conducted to assess the effectiveness of both crack dimensions estimation algorithms. The findings demonstrate that the integration of the BG algorithm, the optimized OrthoBoundary algorithm, and the fully convolutional network with the HRNet backbone achieve a prediction accuracy of 80.21% for crack length estimation and 84.32% for average width estimation. Moreover, the image processing speed, at a resolution of 3024 × 3024, can be maintained at approximately 5 s, with average width estimation observed to be up to 9.1‐fold faster than the unoptimized OrthoBoundary algorithm. These results signify advancements in automated crack quantification methodologies, with implications for enhancing civil infrastructure maintenance practices. [ABSTRACT FROM AUTHOR]

When interpreting marine very high-resolution (VHR) single-channel seismic reflection data, the signal in the water column is generally considered as noise and is often eliminated by a water-mute application to focus on geological information under the seafloor. Alternatively, the signal in the water column can be used to study ocean currents or gas/fluid emissions. To provide images of the sedimentary formations and tectonic structures beneath the seafloor in shallow water regions, such as continental shelves and lakes, marine seismic reflection profiles are often acquired using a single-channel streamer and sparker-type source, providing VHR data, with limited penetration depth. To exploit the full potential of these single-channel data, we propose a simple algorithm, called REWARE (Recovery of Water-column Acoustic Reflectors). This algorithm allows to extract further geological information from the water-column data using open-source codes (Seismic Un*x), adding the coherent signal from the previous shots, recorded in the water column, to the previous traces. The record length becomes longer while maintaining a very high trace-to-trace consistency. To demonstrate its efficiency, we present two examples of the REWARE processing in two different geological contexts: the East Sardinia shelf (Italy) and the North Evia Gulf (Greece). This method provides deeper images than with original data for seismic data acquired across steep slopes, such as canyons or continental shelf breaks. Thus, depending on the seafloor geometry and subseafloor structures, it is possible to image or map sediment layers and tectonic structures at depth, keeping a very high structural resolution. [ABSTRACT FROM AUTHOR]

Background: Retinal prostheses offer hope for individuals with degenerative retinal diseases by stimulating the remaining retinal cells to partially restore their vision. This review delves into the current advancements in retinal prosthesis technology, with a special emphasis on the pivotal role that image processing and machine learning techniques play in this evolution. Methods: We provide a comprehensive analysis of the existing implantable devices and optogenetic strategies, delineating their advantages, limitations, and challenges in addressing complex visual tasks. The review extends to various image processing algorithms and deep learning architectures that have been implemented to enhance the functionality of retinal prosthetic devices. We also illustrate the testing results by demonstrating the clinical trials or using Simulated Prosthetic Vision (SPV) through phosphene simulations, which is a critical aspect of simulating visual perception for retinal prosthesis users. Results: Our review highlights the significant progress in retinal prosthesis technology, particularly its capacity to augment visual perception among the visually impaired. It discusses the integration between image processing and deep learning, illustrating their impact on individual interactions and navigations within the environment through applying clinical trials and also illustrating the limitations of some techniques to be used with current devices, as some approaches only use simulation even on sighted‐normal individuals or rely on qualitative analysis, where some consider realistic perception models and others do not. Conclusion: This interdisciplinary field holds promise for the future of retinal prostheses, with the potential to significantly enhance the quality of life for individuals with retinal prostheses. Future research directions should pivot towards optimizing phosphene simulations for SPV approaches, considering the distorted and confusing nature of phosphene perception, thereby enriching the visual perception provided by these prosthetic devices. This endeavor will not only improve navigational independence but also facilitate a more immersive interaction with the environment. [ABSTRACT FROM AUTHOR]

Medical image copyright protection is becoming increasingly relevant as medical images are used more frequently in medical networks and institutions. The traditional embedded watermarking system is inappropriate for medical images since it degrades the original images' quality. Furthermore, medical-colored image watermarking options are constrained since most medical watermarking systems are built for gray-scale images. This paper proposes a zero-watermarking scheme for medical color image copyright protection based on a chaotic system and Resnet50, which is a convolutional neural network method. The network Resnet50 is used to extract features from the color medical image, and then a logistic Gaussian map is used to scramble these features and scramble the binary image. Finally, an exclusive OR operation is performed (scrambled binary image, scrambled features for the medical color image) to form a zero watermarking. The experimental result proves that our scheme is effective and robust to geometric and common image processing attacks. The BER values of the extracted watermarks are below 0.0039, and the NCC values are above 0.9942, while the average PSNR values of the attacked images are 29.0056 dB. Also, it is superior to other zero-watermark schemes for medical images in terms of robustness to conventional image processing and geometric attacks. Furthermore, the experimental results show that the Resnet50 model outperforms other models in terms of reducing the mean squared errors of the features between the attacked and original image. [ABSTRACT FROM AUTHOR]

The heat exchange tubes in the steam generator are susceptible to vibration caused by fluid flow, which can lead to damage to both the tubes and their support structures due to collisions. To enhance the predictive accuracy and cost effectiveness of fluid-elastic instability mitigation, multiple models have been created to circumvent its occurrence. In this research, a model has been developed to predict fluid-elastic instability in tube arrays by integrating Hassan's time-domain-solving model with a parameter acquisition method using computational fluid dynamics (CFD) simulations. By utilizing CFD methods, a comprehensive set of tube-in-channel model parameters were acquired. This method eliminates the requirement of empirical parameters obtained through experiments. The acquired parameters were integrated into the time-domain, tube-in-channel model. This model predicts fluid-elastic stability for a single flexible tube or a bundle of seven tubes within a rigid tube array, accounting for fluid forces in the lift direction. The stability map accurately represents the stiffness effect of flow-induced vibration, agreeing with experimental results and highlighting that the model may effectively utilize parameters obtained from CFD simulations. The combination of the time-domain-solving model and the CFD-based parameter acquisition method has been shown to produce a reliable model. [ABSTRACT FROM AUTHOR]

Particle shape and grain-scale deformability play key roles in controlling the response of granular material; however, in the literature, the effects of these parameters have generally been evaluated separately. In this context, this study attempts to investigate the coupled effects of these parameters on the repose angle of the sand–rubber mixture using the discrete-element method. For this purpose, the realistic shapes of three different sands and two different rubbers were reflected in the simulations. The grain-scale deformability of rubber particles was modeled by connecting the ball-cluster structure with the linear parallel bond contact model. In addition, to clearly distinguish the role of deformability in the response, the rubber particles were simulated also using a rigid clump model. The parameters of the model were validated using different tests for grain and sample scales. A series of numerical analyses were conducted, and repose angles were determined using image processing techniques. The variation of repose angle was correlated with porosity in the sample scale. The contribution of interparticle friction and interlocking mechanism on the repose angle was revealed using the coordination number and anisotropy coefficient of the contacts in the microscale. The results show that the angle of repose increases with increasing irregularity of the particles. Even though the interlocking mechanism is weakened by the addition of soft rubber, there is an increase in the repose angle of the mixtures thanks to the superior interparticle friction properties of the rubber particles. The results indicate that a high repose angle can be constituted by controlling the particle shape and deformability parameters. [ABSTRACT FROM AUTHOR]

In this paper, the approximate parallel prefix adders with minimizing hardware and timing complexities are proposed. Moreover, an approximate multiplier based on these adders is designed. The approximate structures include two approximate Sklansky adders, one approximate Ladner-Fischer adder, and one approximate Kogge-Stone adder. The proposed adders are free from carry rippling. The main strategy for approximate design is primarily based on rearranging and deleting sub-blocks and secondary reducing the critical path delay and area in the adders. In this case, we have a trade-off between accuracy, delay, and area. The proposed approximate multiplier has a serial structure that is designed based on using one approximate parallel prefix adder. The proposed approximate adders and multiplier are compared from hardware and accuracy point of view such as gate count, delay, area delay product, error rate, mean error distance, mean relative error distance, and normalized error distance. The efficacy of proposed structures in image processing applications such as image smoothing (low-pass filter) and image multiplication is performed using MATLAB. The results show the proposed approximate structures are comparable in terms of area, delay, PSNR, and mean structural similarity index metric parameters with other works. [ABSTRACT FROM AUTHOR]

Infrared thermal imaging presents a promising avenue for detecting physiological phenomena such as hot flushes in animals, presenting a non-invasive and efficient approach for monitoring health and behavior. However, thermal images often suffer from various types of noise, which can impede the accuracy of analysis. In this study, the efficacy of different noise filtering algorithms is investigated utilizing filtering algorithms as preprocessing steps to enhance U-Net convolutional neural network (CNN) performance in processing animal skin infrared image sets for hot flush recognition. This study compares the performance of four commonly used filtering methods: mean, median, Gaussian, and bilateral filters. The impact of each filtering technique on noise reduction and preservation of features critical for hot flush detection is evaluated in a machine learning hot flush detection algorithm. The optimal filtering for skin thermal imaging was a median filter which significantly improved the U-Net CNN's ability to accurately identify hot flush patterns, achieving an Intersection over Union score of 92.6% compared to 90.4% without filters. This research contributes to the advancement of thermal image processing methodologies for animal health monitoring applications, providing valuable insights for researchers and practitioners in the field of veterinary medicine and animal behavior studies utilizing autonomous thermal image segmentation. [ABSTRACT FROM AUTHOR]

Operational modal analysis (OMA) is required to maintain large-scale and necessary civil infrastructures. The non-contact method of OMA using digital image correlation and point tracking algorithms requires a speckle pattern placed on the structure. Alternatively, advanced computer vision methods like optical flow and phase-based video motion magnification (PBVMM) techniques are used to measure modal parameters. Despite the importance of PBVMM, the users should know the range of frequencies in which the natural structure frequency lies. A methodology based on an unsupervised machine learning technique is developed to extract the modal parameters blindly from its recorded digital video. The proposed methodology uses complex steerable pyramids and an unsupervised machine learning technique, also known as principal component analysis, and analytical mode decomposition with a random decrement technique to blindly extract the modal parameters of a structure. This study validated the proposed methodology using a multi-degree of freedom (DOF) numerical model. The results are compared with theoretical and estimated values and are in good agreement. Furthermore, it is implemented on a laboratory benchmark SDOF, MDOF, and real-time videos of the London Millennium and Tacoma Narrows bridges for blindly extracting the modal frequencies and damping ratios. [ABSTRACT FROM AUTHOR]

Fabricating ultra-large aspect ratio microcylindrical electrode array efficiently, quickly, and reliably while maintaining high quality and low cost presents a continuous challenge. In this paper, a new method is proposed to produce ultra-large aspect ratio microcylindrical electrode array by taking advantage of the peculiar phenomenon that the front end of micro-prismatic electrode array becomes rounded after being worn in electric discharge machining (EDM). Specifically, micro-hole array with rounded outlets is machined on the workpiece using worn micro-prismatic electrode array, and then the micro-prismatic electrode array is converted into micro-cylindrical electrode array by reverse EDM. First, the simulation and analysis of the electric field distribution of the micro-prismatic electrode is carried out to reveal the mechanism of morphology evolution. Then, various micro-prism electrode arrays with different cross-sectional shapes were produced using the low-speed wire EDM technique. Next, the effects of cross-sectional shape, substrate material, peak current, and pulse width on electrode wear are studied. And the process conditions for rapid wear of the electrode front section into a circle and good wear consistency of the electrode array were optimized. The mathematical model of the front-end wear of the micro-prismatic electrode is also established. Following this, the development of electrode morphology was presented, transitioning from micro-prism electrode array to micro-cylindrical electrode array. The process of substrate shape change from square to circular holes was also discussed. The dimensional consistency of the micro-circular hole array was evaluated using image processing technology. Finally, a microcylindrical electrode array, measuring approximately 230 μm in diameter and having an aspect ratio of 18.15, has been successfully prepared and evaluated. This research has the potential to overcome the technological bottleneck of achieving high precision machining of micro-cylindrical electrode array with large aspect ratios. [ABSTRACT FROM AUTHOR]

Electron tomography of frozen, hydrated samples allows structure determination of macromolecular complexes that are embedded in complex environments. Provided that the target complexes may be localised in noisy, three‐dimensional tomographic reconstructions, averaging images of multiple instances of these molecules can lead to structures with sufficient resolution for de novo atomic modelling. Although many research groups have contributed image processing tools for these tasks, a lack of standardisation and interoperability represents a barrier for newcomers to the field. Here, we present an image processing pipeline for electron tomography data in RELION‐5, with functionality ranging from the import of unprocessed movies to the automated building of atomic models in the final maps. Our explicit definition of metadata items that describe the steps of our pipeline has been designed for interoperability with other software tools and provides a framework for further standardisation. [ABSTRACT FROM AUTHOR]

In the digital era, social media has become a cornerstone for educational institutions, driving public engagement and enhancing institutional communication. This study utilizes AI-driven image processing and Web-enhanced Deep Learning (DL) techniques to investigate the effectiveness of King Faisal University's (KFU's) social media strategy as a case study, particularly on Twitter. By categorizing images into five primary event management categories and subcategories, this research provides a robust framework for assessing the social media content generated by KFU's administrative units. Seven advanced models were developed, including an innovative integration of Vision Transformers (ViTs) with Convolutional Neural Networks (CNNs), Long Short-Term Memory (LSTM) networks, VGG16, and ResNet. The AI-driven ViT-CNN hybrid model achieved perfect classification accuracy (100%), while the "Development and Partnerships" category demonstrated notable accuracy (98.8%), underscoring the model's unparalleled efficacy in strategic content classification. This study offers actionable insights for the optimization of AI-driven digital communication strategies and Web-enhanced data collection processes, aligning them with national development goals and Saudi Arabia's Vision 2030, thereby showcasing the transformative power of DL in event-centric management and the broader higher education landscape. [ABSTRACT FROM AUTHOR]

The durability of geopolymer concrete containing Ground Granulated Blast Furnace Slag (GGBS) and Rice Husk Ash (RHA), along with Lightweight Expanded Clay Aggregate (LECA), was investigated. Six different LWGPC mixtures were made with NaOH molarities of 8, 10, and 12M. For each molarity, two combinations of source materials were selected: 100% GGBS (G) and 80% GGBS with 20% RHA (RG). In all the mixtures, coarse aggregate was substituted with 35% LECA. LWGPC mixtures were exposed to 3% HCl, 5% MgSO4, and 3.5% NaCl for studying the durability properties. The test results demonstrate that 100% GGBS with 12M NaOH (12G) outperformed all other mixtures. The residual compressive strength of 12G mix LWGPC specimens after six months of exposure was found to be 86.4% in an acid environment, 90.6% in a sulfate environment, and 91.4% in a salt environment. The elemental composition analyzed using EDAX reveals that silica, alumina, calcium, and sodium are the predominant elements that form a dense microstructure with N-A-S-H, C-A-S-H, and C-S-H. Further, the inner properties of the specimens exposed to chemicals were examined using MATLAB R2023b and ImageJ 1.54f based on SEM images. The SEM image showed that the porosity of LWGPC specimens ranged from 0.5194 to 0.6748 µm, signifying an enhanced durability performance. The experimental results and microstructural analysis show that the LWGPC incorporating RHA and GGBS with LECA offers a superior performance, making it a promising solution for sustainable and durable construction. [ABSTRACT FROM AUTHOR]

Workpiece surface quality is a critical metric for assessing machining quality. However, due to the complex coupling characteristics of cutting factors, accurately predicting surface roughness remains challenging. Typically, roughness is measured post-machining using specialized instruments, which delays feedback and hampers timely problem detection, ultimately resulting in cutting resource wastage. To address this issue, this paper introduces a predictive model for workpiece surface roughness based on the finite element (FE) method and advanced image processing techniques. Initially, an orthogonal turning experiment was designed, and an FE cutting model was constructed to assess the distribution of cutting forces and temperatures under varying cutting parameters. Image processing methods (including mesh calibration, edge extraction, and contour fitting) were then applied to extract surface characteristics from the FE simulation outputs, yielding preliminary estimates of surface roughness. By employing range and regression analyses methods, this study quantitatively evaluates the interdependencies among cutting parameters, forces, temperatures, and roughness, subsequently formulating a multivariate regression model to predict surface roughness. Finally, a turning experiment under actual working conditions was conducted, confirming the model's capacity to predict the R a trend with an accuracy of 85.07%. Thus, the proposed model provides a precise predictive tool for surface roughness, offering valuable guidance for optimizing machining parameters and supporting proactive control in the turning process, ultimately enhancing machining efficiency and quality. [ABSTRACT FROM AUTHOR]

As a novel pavement wear layer material, the micromechanical mechanisms of High-toughness Ultra-thin Friction Course (HUFC) have not been fully elucidated. This paper presents a new method for the three-dimensional micromechanical simulation of high-toughness asphalt mixtures based on a viscoelastic parameter calibration model. X-ray Computerized Tomography (CT) was employed to scan samples of high-toughness asphalt mixtures to obtain detailed information on the internal structure (aggregate, fine aggregate matrix FAM and voids), and a three-dimensional micromechanical model was constructed based on the real-scale distribution of these components. Aggregates in the high-toughness asphalt mixture were modeled as elastic bodies, while FAM was treated as a viscoelastic material characterized by the Burgers model. Using the Boltzmann linear superposition principle and Laplace transform theory, the viscoelastic properties of FAM were converted into Prony parameters recognizable by finite element software, and the viscoelastic parameters were calibrated. Micromechanical simulations were conducted for three different gradings of high-toughness asphalt mixtures, and the results show that the predicted deformation closely matched the measured deformation. This method accurately reflects the deformation characteristics of different gradings of high-toughness asphalt mixtures, overcoming the limitations of traditional numerical simulations based on homogeneous material models. It represents an advancement and refinement of micromechanical simulation methods for high-toughness asphalt mixtures. [ABSTRACT FROM AUTHOR]

Based on the magnetic field data recorded by the ZH‐1 electromagnetic satellite, we cerat a training set of 1,300 spectrograms containing the dispersion spectrum of lightning whistlers (LW). The Segment Anything Model (SAM) in the field of image segmentation is trained through the training set to obtain a fine‐tuned SAM model that can be used to detect and segment the dispersion spectrum of LW at pixel level. All track regions of LW are effectively separated from other non‐lightning whistlers regions in the spectrograms after being segmented by the model. The segmentation effect is excellent and detection accuracy is 96.89%, which is better than the previous segmentation model for LW based on ground station data. Then we apply the traditional image processing methods to extract the dispersion spectrum of LW one by one, and develop an algorithm to automatically extract the physical parameters of each LW. The root mean square error between the automatically extracted dispersion parameter and the manually extracted dispersion parameter is only 0.1654 s1/2. The model and algorithm studied in this paper are employed to analyze the dispersion of LW received by the ZH‐1 satellite over China. It is found that the whistlers dispersion received by satellites during summer in the northern hemisphere and summer in the southern hemisphere shows opposite trends with receiving latitude. Both trends can be explained by the relationship between the dispersion and the length of propagation paths of LW. Plain Language Summary: Lightning radiates out in the form of electromagnetic waves, and part of the very‐low‐frequency signal can leak into the ionosphere and propagate along the geomagnetic field lines to another hemisphere. Because this part of the signal has a whistle‐like sound, it is named lightning whistlers (LW). Due to the dispersion effect in the ionosphere, components with higher frequencies correspond to larger group velocity and propagate faster in the propagation process of LW. There is an L‐shaped dispersion pattern where the frequency gradually decreases with time in the spectrogram of whistlers. Image segmentation is an image recognition technique in the field of computer vision, aimed at assigning each pixel to a predefined category. Image segmentation technology can effectively separate all L‐shaped dispersion regions of whistlers from other non‐L‐shaped dispersion regions in the spectrograms, achieving automatic detection for whistles. The study in this paper is based on the electromagnetic data recorded by ZH‐1 satellite. We apply the Segment Anything Model in the field of image segmentation to detect and segment LW. The segmentation effect is excellent and detection accuracy is 96.89%. We then use the traditional image processing and develop an algorithm to automatically extract the physical parameters of each LW. Key Points: The image segmentation technology is firstly used to automatically detect and segment the lightning whistlers (LW) recorded by ZH‐1 satelliteAn algorithm based on image processing methods is proposed to automatically extract the physical parameters of detected LWThe model and algorithm studied in this paper are employed to analyze the dispersion of LW received by satellite over China [ABSTRACT FROM AUTHOR]

To solve the problem of high misidentification rate, high missed detection rate, low algorithm execution efficiency, and poor model generalization ability in the recognition of volatile organic compound (VOC) leakage area of infrared gas imager, a VOC leakage area recognition method based on motion feature enhancement was proposed. The video stability threshold was determined by using the statistical method of projection change rate of video sequence, and the moving background and moving foreground were extracted under stable state. Optimized linear stretching was used to perform feature enhancement and outlier filtering on the moving foreground. The motion foreground was fused with the original frame, and VOC leakage area identification was performed using the target detection algorithm. Through the method of model pre-training and transfer learning, the smoke dataset and a small amount of VOC leakage dataset were used to train the recognition model, and the model was transferred to the RK3588S embedded development board for execution efficiency test. Experimental results show that the mean average precision of the proposed algorithm is 0. 88 when the intersection over union ratio is 0.5, and the mean average precision is 0.51 when the intersection over union ratio ranges from 0.5 to 0.95. The average recognition time of a single frame is 49 ms, which has high recognition accuracy and recognition efficiency, and can meet the requirements of real-time monitoring. The algorithm in this article can maintain stable model performance and has certain anti-interference capabilities providing some reference for VOC leak identification. [ABSTRACT FROM AUTHOR]

Copyright of Chinese Journal of Liquid Crystal & Displays is the property of Chinese Journal of Liquid Crystal & Displays and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Aiming at the requirement of damage testing and evaluation of equivalent target plate based on the explosion of intelligent ammunition, this paper proposes a novel method for damage testing and evaluation method of circumferential equivalent target plate. Leveraging the dispersion characteristics parameters of fragment, we establish a calculation model of the fragment power situation and the damage calculation model under the condition of fragment ultimate penetration equivalent target plate. The damage model of equivalent target plate involves the fragment dispersion density, the local perforation damage criterion, the tearing damage model, and the damage probability. We use the camera to obtain the image of the equivalent target plate with fragment perforation, and research the algorithm of fragment distribution position recognition and fragment perforation area calculation method on the equivalent target plate by image processing technology. Based on the obtained parameters of the breakdown position and perforation area of fragments on equivalent target plate, we apply to damage calculation model of equivalent target plate, and calculate the damage probability of each equivalent target plate, and use the combined probabilistic damage calculation method to obtain the damage evaluation results of the circumferential equivalent target plate in an intelligent ammunition explosion experiment. Through an experimental testing, we verify the feasibility and rationality of the proposed damage evaluation method by comparison, the calculation results can reflect the actual damage effect of the equivalent target plate. [ABSTRACT FROM AUTHOR]

The pharmaceutical industry increasingly values medicinal plants due to their perceived safety and cost-effectiveness compared to modern drugs. Throughout the extensive history of medicinal plant usage, various plant parts, including flowers, leaves, and roots, have been acknowledged for their healing properties and employed in plant identification. Leaf images, however, stand out as the preferred and easily accessible source of information. Manual plant identification by plant taxonomists is intricate, time-consuming, and prone to errors, relying heavily on human perception. Artificial intelligence (AI) techniques offer a solution by automating plant recognition processes. This study thoroughly examines cutting-edge AI approaches for leaf image-based plant identification, drawing insights from literature across renowned repositories. This paper critically summarizes relevant literature based on AI algorithms, extracted features, and results achieved. Additionally, it analyzes extensively used datasets in automated plant classification research. It also offers deep insights into implemented techniques and methods employed for medicinal plant recognition. Moreover, this rigorous review study discusses opportunities and challenges in employing these AI-based approaches. Furthermore, in-depth statistical findings and lessons learned from this survey are highlighted with novel research areas with the aim of offering insights to the readers and motivating new research directions. This review is expected to serve as a foundational resource for future researchers in the field of AI-based identification of medicinal plants. [ABSTRACT FROM AUTHOR]

In today's world, image processing techniques play a crucial role in the prognosis and diagnosis of various diseases due to the development of several precise and accurate methods for medical images. Automated analysis of medical images is essential for doctors, as manual investigation often leads to inter-observer variability. This research aims to enhance healthcare by enabling the early detection of diabetic retinopathy through an efficient image processing framework. The proposed hybridized method combines Modified Inertia Weight Particle Swarm Optimization (MIWPSO) and Fuzzy C-Means clustering (FCM) algorithms. Traditional FCM does not incorporate spatial neighborhood features, making it highly sensitive to noise, which significantly affects segmentation output. Our method incorporates a modified FCM that includes spatial functions in the fuzzy membership matrix to eliminate noise. The results demonstrate that the proposed FCM-MIWPSO method achieves highly precise and accurate medical image segmentation. Furthermore, segmented images are classified as benign or malignant using the Decision Tree-Based Temporal Association Rule (DT-TAR) Algorithm. Comparative analysis with existing state-of-the-art models indicates that the proposed FCM-MIWPSO segmentation technique achieves a remarkable accuracy of 98.42% on the dataset, highlighting its significant impact on improving diagnostic capabilities in medical imaging. [ABSTRACT FROM AUTHOR]

Recent advances in artificial intelligence have led to deepfake images, enabling users to replace a real face with a genuine one. deepfake images have recently been used to malign public figures, politicians, and even average citizens. deepfake but realistic images have been used to stir political dissatisfaction, blackmail, propagate false news, and even carry out bogus terrorist attacks. Thus, identifying real images from fakes has got more challenging. To avoid these issues, this study employs transfer learning and data augmentation technique to classify deepfake images. For experimentation, 190,335 RGB-resolution deepfake and real images and image augmentation methods are used to prepare the dataset. The experiments use the deep learning models: convolutional neural network (CNN), Inception V3, visual geometry group (VGG19), and VGG16 with a transfer learning approach. Essential evaluation metrics (accuracy, precision, recall, F1-score, confusion matrix, and AUC-ROC curve score) are used to test the efficacy of the proposed approach. Results revealed that the proposed approach achieves an accuracy, recall, F1-score and AUC-ROC score of 90% and 91% precision, with our fine-tuned VGG16 model outperforming other DL models in recognizing real and deepfakes. [ABSTRACT FROM AUTHOR]

The article discusses the comparison between two radiomics research quality scoring tools, METRICS and RQS, highlighting their unique features and differences. METRICS, endorsed by leading imaging societies, aims to standardize the methodological quality assessment of radiomics research, while RQS has been widely adopted in the research community despite its limitations. The article presents hypothetical scenarios to compare the two tools, emphasizing the distinct focus of each on different aspects of the radiomic pipeline. Researchers are advised to consider the unique features of each tool based on the insights provided in the analysis. [Extracted from the article]

Given the significant role of asphaltic pavement in surface transportation systems, even minor enhancements in asphalt materials hold the potential for cost savings and reduced environmental impacts. The healing properties of asphalt have drawn interest for sustainability, yet much remains unknown about the causes and influencing factors. To leverage self‐healing for extending pavement life, understanding the mechanisms and conditions that stimulate microcrack healing is essential. This study aims to investigate the dynamic progress of microcrack closure in asphalt mastics. The time‐series evolution of crack closure led by self‐healing is tracked by neutron computed tomography, with image processing facilitating volumetric analysis over a 7 h period. The study examines the healing process in mastic samples with three different sand filler contents (10, 20, and 30%). Results show that for all the investigated samples, the healing rate declines exponentially over time, with 100% recovery not achieved after 7 h at room temperature. Filler content‐influenced healing speed and 20% sand demonstrate the best performance. Meanwhile, the healing performance varies within the 10% and 30% groups, depending on initial crack size. Additionally, the study finds that initial crack size influences healing behavior in the samples. [ABSTRACT FROM AUTHOR]