Search

Urban parks constitute one of the main leisure areas, especially for the most vulnerable people in our society, children, and the elderly. Contact with soils can pose a health risk. Microbiological testing is a key aspect in determining whether they are suitable for public use. The aim of this work is to map the spatial distribution of potential dangerous Enterobacteria but also bioremediation useful (lipase producers) isolates from soils in an urban park in the area of Valencia (Spain). To this end, our team has collected 25 samples of soil and isolated 500 microorganisms, using a mobile application to collect information of the soil samples (i.e. soil features, temperature, humidity, etc.) with geolocation. A combined protocol including matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) and 16S rDNA sequencing PCR has been established to characterize the isolates. The results have been processed using spatial statistical techniques (using Kriging method), taking into account the number of isolated strains, also proving the reactivity against standard pathogenic bacterial strains (Escherichia coli, Bacillus cereus, Salmonella, Pseudomonas and Staphylococcus aureus), and have increased the number of samples (to 896 samples) by interpolating spatially each parameter with this statistical method. The combined use of methods from biology and computer science allows the quality of the soil in urban parks to be predicted in an agile way, which can generate confidence in its use by citizens.

As minimum area SRAM bit-cells are obtained when using cell ratio and pull-up ratio of 1, we analyze the possibility of decreasing the cell ratio from the conventional values comprised between 1.5-2.5 to 1. The impact of this option on area, power, performance and stability is analyzed showing that the most affected parameter is read stability, although this impact can be overcome using some of the read assist circuits proposed in the literature. The main benefits are layout regularity enhancement, with its consequent higher tolerance to variability, cell area reduction by 25 percent (with respect to a cell having a cell ratio of 2), leakage current improvement by a 35 percent, as well as energy dissipation reduction and a soft error rate per bit improvement of around 30 percent.

CMOS–MEMS microresonators have become excellent candidates for developing portable chemical VOC sensing systems thanks to their extremely large mass sensitivity, extraordinary miniaturization capabilities, and on-chip integration with CMOS circuitry to operate as a self-sustained oscillator. This paper presents two 4-anchored MEMS plate resonators, with a resonance frequency of 2.2 MHz and 380 kHz, fabricated together with the required circuitry using a commercial 0.35 μm CMOS technology and then coated with poly-4-vinylheduorocumyl alcohol (P4V) via inkjet deposition. Such P4V constitutes a functionalization layer for specific acetone detection as a key step in the development of an integrated device for non-invasive diabetes diagnosis through exhaled human breath. The coated sensor system has been proven to increase the acetone injection response by 6-times compared to the uncoated platform and shows a cross-sensitivity to butane of 1 : 11. Experimental data show an acetone sensitivity of −0.012 ppm Hz−1 in the best case that, together with a measured frequency Allan deviation of 0.32 ppm, provides an expected limit of detection as low as 20 ppb of acetone. Additionally, this work presents an alternative resonator design with folded flexure anchors that provide a drastic reduction of the sensor temperature sensitivity and mitigate the impact of a fluid flow inherent to the calibration system.

[ES] La innovación educativa es un proceso que se extiende más allá de un curso académico. En su desarrollo se distinguen las etapas de planificación, implementación, evaluación y realimentación, para identificar aspectos susceptibles de mejora. En esta contribución presentamos el trabajo desarrollado en los dos últimos cursos en la asignatura Teoría de la Comunicación (materia de Comunicaciones Digitales), Grado en Ingeniería Telemática, de la Universitat de València. Concretamente, se incorporan dispositivos de radio definida por software en los laboratorios como herramienta para conseguir unas prácticas más realistas. El artículo describe el proceso de adaptación de una sesión de laboratorio, que inicialmente fue desarrollada por un grupo piloto reducido en el curso 2018-2019, para un grupo experimental de laboratorio en el curso 2019-2020. Para evaluar el impacto de la innovación se cuantifica la implicación del alumnado, comparando los resultados del grupo experimental con respecto a dos grupos de control que han continuado con las sesiones simuladas estándar. Los resultados indican que el impacto ha sido positivo en la capacidad de los estudiantes para afrontar nuevos retos y en su percepción de la relevancia de las actividades que realizan, aunque esta mejora no se refleje en su capacidad de centrarse en ellas., [EN] Educational innovation is a process that extends beyond an academic year. In its development, the stages of planning, implementation, evaluation and feedback are distinguished in order to identify aspects that could be improved. In this contribution, we present the work developed over the last two years in the subject Communication Theory (Digital Communications), Degree in Telematic Engineering, from the University of Valencia. Specifically, software defined radio devices have been incorporated in the laboratories as a tool to bring students closer to more realistic practices. The paper describes the adaptation process of a laboratory session, which was initially developed by a small pilot group in the academic year 2018-2019, for an experimental laboratory group in the academic year 2019-2020. In order to evaluate the impact of the innovation, the involvement of the students is quantified, comparing the results of the experimental group with two control groups that have continued with the standard simulated sessions. The results indicate that the impact has been positive on the students’ ability to face new challenges and on their perception of the relevance of the activities they carry out, although this improvement is not reflected in their ability to focus on them.

The world is becoming wireless. In contrast with wired technologies, wireless technologies are widespread in several sectors and they are more and more present in many aspects of life. Wireless includes any technologies which uses no wire. They can be applied for specific applications and have been standardized. (Bluetooth or IEEE 802.15.1, WiFi or IEEE 802.11, ZigBee or IEEE 802.15.4, RFID standardized as ISO 18000, etc). One of the most valuable reasons for the growth of wireless technologies for communications is the requirements for the mobility of modern applications. These requirements, and also security, make wireless technologies one of the best candidates for these applications and for establishing secure communications in traffic vehicular environments, so for vehicle to vehicle (V2V) as well as for vehicle to infrastructure (V2I). Electronic Registration and Identification (ERI) of vehicles is a way to identify a vehicle univocally by means of some kind of wireless technology for communication. This protocol allows a wide range of interesting ITS applications, which involves secure identification of vehicles using symmetrical and asymmetrical techniques. These applications could be applied in private and public services (tolling systems, access to parking lots, information services, etc ). Figure 1 shows a schema which explains the whole architecture in order to understand how ERI standards are settled within an AVI/AEI architecture proposed in ISO 14814. A specific application programming interface of wireless communications developed for Electronic Registration of Vehicles is explained in this chapter as an example of application of this technology. The philosophy of this concept is gathered in the ISO/TS 24534 and ISO/TS 24535 standards, also named ERI standards. This family of standards establishes the architecture of reference to Vehicle Identification independently of the physical technology used, so they do not specify a particular wireless technology to develop any kind of system application (the standard just suggests DSRC technology for deployment of the protocol). In other terms, these standards are linked to the Automatic Vehicle Identification (AVI/AEI) family of standards, which are ISO 14814 to 14816. This family of standards is the framework in which ERI is included. Taking into account what is explained in the standards, ERI protocol allows establishing secure communications between the road infrastructure and the moving vehicles. This is an issue in which several Traffic administrations have been interested in. In this sense

In recent years, Wireless Acoustic Sensor Networks (WASN) have been widely applied to different acoustic fields in outdoor and indoor environments. Most of these applications are oriented to locate or identify sources and measure specific features of the environment involved. In this paper, we study the application of a WASN for room acoustic measurements. To evaluate the acoustic characteristics, a set of Raspberry Pi 3 (RPi) has been used. One is used to play different acoustic signals and four are used to record at different points in the room simultaneously. The signals are sent wirelessly to a computer connected to a server, where using MATLAB we calculate both the impulse response (IR), and different acoustic parameters, such as the Speech Intelligibility Index (SII). In this way, the evaluation of room acoustic parameters with asynchronous IR measurements two different applications has been explored. Finally, the network features have been evaluated to assess the effectiveness of this system.

[EN] Devices based on software defined radio have been used in the last 6 years as motivating elements in the laboratory practices of digital communications courses at the Degree in Telematics Engineering of the University of Valencia. However, the development of these practices requires giving access to some hardware devices that are physically located in the laboratories of the School of Engineering. In this contribution, taking into account the current situation of hybrid learning and a possible transition to remote learning due to the COVID-19 pandemic, a system that allows the remote interaction with the software defined radio devices is proposed. This remote access system, in addition to allowing these devices to be used in laboratory practices even in a remote learning context, would allow students to access them outside laboratory practice hours. The results obtained in the Digital Communications Theory course demonstrate the high potential for motivation and increased academic involvement provided by the use of these devices, especially in contexts with low academic involvement, such as the 2020-2021 academic year., [ES] Los dispositivos de radio definida por software se han utilizado en los últimos 6 años como elementos dinamizadores de las prácticas de laboratorio en las asignaturas de la materia de comunicaciones digitales del Grado en Ingeniería Telemática de la Universitat de València. Sin embargo, el desarrollo de estas prácticas requiere el acceso a unos dispositivos hardware que están localizados físicamente en los laboratorios de la Escuela Técnica Superior de Ingeniería. En esta contribución, atendiendo a la actual situación de docencia semipresencial y de un posible paso a docencia en línea debido a la pandemia de COVID-19, se plantea establecer un sistema que permita la interacción remota con los dispositivos de radio definida por software. Este sistema de acceso remoto, además de permitir que se sigan utilizando estos dispositivos en las prácticas de laboratorio aún en un contexto de docencia en línea, permitiría el acceso del alumnado a ellos fuera del horario de prácticas de laboratorio. Los resultados obtenidos en la asignatura de Teoría de la Comunicación demuestran el alto potencial de motivación y de aumento de la implicación académica que presentan estos dispositivos, especialmente en contextos con una implicación académica baja, como es el curso académico 2020-2021., Este trabajo ha sido financiado por el “Vicerectorat d’Ocupació i Programes Formatius” de la Universitat de València a través del proyecto UV-SFPIE PID-1353656. Sandra Roger agradece la finaciación recibida a través del contrato postdoctoral RYC-2017-22101 y el proyecto GV/2020/046.

Las comunicaciones digitales se enseñan tradicionalmente en sesiones de laboratorio desde un punto de vista teórico, utilizando plataformas de simulación. Sin embargo, el sistema de Acreditación Académica incluye la dimensión de "lo que se espera que los estudiantes sean capaces de hacer", lo que plantea la necesidad de disminuir la brecha entre las sesiones de laboratorio simuladas y un enfoque más práctico y realista. En este trabajo, proponemos una metodología para mejorar el aprendizaje de los aspectos prácticos relacionados con los cursos de Comunicaciones Digitales, así como para aumentar la motivación de los estudiantes, mediante el uso de dispositivos de radio definida por software de bajo coste. Esta metodología se ha aplicado en el Grado en Ingeniería Telemática de la Escuela Técnica Superior de Ingeniería de la Universidad de Valencia, España. Con el objetivo de mejorar el compromiso de los estudiantes de máster y de grado, se ha implementado una metodología de aprendizaje basado en proyectos. En el trabajo se describe la metodología, se describen varias actividades de laboratorio basadas en el estándar 802.11 y se dan recomendaciones para la implementación de esta metodología. UV-SFPIE PID-1353656 Digital Communications have been traditionally taught in laboratory sessions from a theoretical point of view, using simulation platforms. However, current Academic Accreditation includes the dimension of “what students are expected to be able to do”, which poses the need of decreasing the gap between standard simulated laboratory sessions and more practical and realistic approaches. In this paper, we propose a methodology to enhance the learning of practical aspects related to Digital Communications courses, as well as increasing the student’s engagement, via the use of low-cost software defined radio devices. This methodology has been applied in the Degree in Telematics Engineering at the School of Engineering from the University of Valencia, Spain. With the aim of improving the engagement of both master and undergraduate students, a project based learning methodology has been implemented. In the paper, the methodology is described, several laboratory activities based on the 802.11 standard are presented, and recommendations for practice are given.

The emergence of pathogenic bacteria that are multi-resistant to antibiotics lurks in today's society. In the golden age of the discovery of new antibiotic-producing microorganisms, each contribution was a step forward, but currently the progression is no longer so spectacular. The probability of finding new microorganisms and different antibiotics is lower and lower. The use of spatial statistical methods such as the Kriging technique has been shown to be suitable for this purpose, allowing us to determine areas with greater possibilities of locating these microorganisms. For a practical approach of our estimations, a total of 12 isolates capable of inhibiting the growth of several control strains (Escherichia coli, Bacillus cereus and at least one other) were analyzed. The isolates were preliminarily characterized, and subsequently identified at the species level by DNA sequence analyses (16S rDNA PCR) and protein analyses (MALDI-TOF MS). However, between soil pH values and the number of isolates capable of inhibiting the control strains. Geospatial mapping with RStudio software provide a satisfactory predictive tool for isolation of new microbial isolates.

Microelectromechanical resonators nonlinearities can be exploited in many ways to obtain a set of diverse new applications. In particular, some applications of bistable behavior includes threshold mechanical switches, memory cells, energy harvesting and chaotic signal generators. A key step for practical and efficient design for bistability behavior involves accounting for accurate and efficient models. In this paper we present a nonlinear electromechanical model for capacitive clamped-clamped beam resonators implemented in an analog hardware description language (AHDL) enabling system level electrical simulations. The model accounts for nonlinearities from variable resonator-electrode gap, residual fabrication stress, fringing field contributions as well as an accurate resonator deflection profile in contrast to parallel plate approximations. The model has been applied to derive for first time accurate analytical expressions for bistability design conditions. The work includes FEM analysis and experimental data that corroborates the correctness of the model in describing the required bias voltage conditions for bistability.

A wireless acoustic sensor network comprises a distributed group of devices equipped with audio transducers. Typically, these devices can interoperate with each other using wireless links and perform collaborative audio signal processing. Ranging and self-positioning of the network nodes are examples of tasks that can be carried out collaboratively using acoustic signals. However, the environmental conditions can distort the emitted signals and complicate the ranging process. In this context, the selection of proper acoustic signals can facilitate the attainment of this goal and improve the localization accuracy. This letter deals with the design and evaluation of acoustic probe signals allowing the implementation of ranging applications using unsynchronized audio signals acquired by different network nodes. The proposed signals have been evaluated in diverse simulated environments and implemented in a real deployment. The results confirm the suitability of these signals for implementing localization applications with an accuracy that is in the order of 1 cm.

Lightning and thunder are some of the most violent natural phenomena. They generate a great deal of expenditure and economic loss, especially when they strike in cities. The identification of the concrete geographic area where they strike is of critical importance for emergency services in order to enhance their effectiveness by doing an intensive coverage of the affected area. To achieve this purpose at the city scale, this paper proposes the design, prototype, and validation of a distributed network of Internet of Things (IoT) devices. The IoT devices are empowered with lightning detection capabilities and are synchronized with the other devices in the sensor network. All of them cooperate within a network that is able to locate different events thanks to a trilateration algorithm implemented in a big data environment. The designed low-cost lightning detection system is based on the AS3935 sensor. This system alone has a limited range of effective detection, but when it is embedded in an IoT mesh network, the accuracy and performance are increased. A fully operational IoT network was deployed, and a functional validation and empirical measurements are provided.

The Internet of Things (IoT) is a network widely used with the purpose of connecting almost everything, everywhere to the Internet. To cope with this goal, low cost nodes are being used, otherwise, it would be very expensive to expand so fast. These networks are set up with small distributed devices (nodes) that have a power supply, processing unit, memory, sensors, and wireless communications. In the market, we can find different alternatives for these devices, such as small board computers (SBCs), e.g., Raspberry Pi (RPi)), with different features. Usually these devices run a coarse version of a Linux operating system. Nevertheless, there are many scenarios that require enhanced computational power that these nodes alone are unable to provide. In this context, we need to introduce a kind of collaboration among the devices to overcome their constraints. We based our solution in a combination of clustering techniques (building a mesh network using their wireless capabilities), at the same time we try to orchestrate the resources in order to improve their processing capabilities in an elastic computing fashion. This paradigm is called fog computing on IoT. We propose in this paper the use of cloud computing technologies, such as Linux containers, based on Docker, and a container orchestration platform (COP) to run on the top of a cluster of these nodes, but adapted to the fog computing paradigm. Notice that these technologies are open source and developed for Linux operating system. As an example, in our results we show an IoT application for soundscape monitoring as a proof of concept that it will allow us to compare different alternatives in its design and implementation, in particular, with regard to the COP selection, between Docker Swarm and Kubernetes. We conclude that using and combining these techniques, we can improve the overall computation capabilities of these IoT nodes within a fog computing paradigm.

We present experimental results of the cross-section related to cosmic-ray irradiation at ground level for minimum-sized six-transistor (6T) and eight-transistor (8T) bit-cells SRAM memories implemented on a 65 nm CMOS standard technology. Results were obtained from accelerated irradiation tests performed in the mixed-field irradiation facility of the CERN High-energy Accelerator test facility (CHARM) at the European Organization for Nuclear Research in Geneva, Switzerland. A 1.45× higher SEU cross-section was observed for 6T-cell designs despite the larger area occupied by the 8T cells (1.5× for MCU). Moreover, the trend for events affecting multiple bits was higher in 6T-cells. The cross-section obtained values show that the memories have enough sensitivity to be used as a radiation monitors in high energy physics experiments.

For the first time, chaotic signal generation with a simple and straight clamped-clamped beam resonator has been experimentally measured. The submicrometric MHz resonator and the readout circuit have been fabricated and monolithically integrated using a commercial $0.35-\mu\mathrm{m}$ CMOS technology. Extensive homoclinic chaotic motion has been obtained from the bistable cc-beam resonator and validated by means of a positive Lyapunov exponent.

eHealth systems provide medical support to users and contribute to the development of mobile and quality health care. They also provide results on the prevention and follow-up of diseases by monitoring health-status indicators and methodical data gathering in patients. Telematic management of health services by means of the Internet of Things provides immediate support and it is cheaper than conventional physical presence methods. Currently, wireless communications and sensor networks allow a person or group to be monitored remotely. The aim of this paper is to develop and assess a system for monitoring physiological parameters to be applied in different scenarios, such as health or sports. This system is based on a distributed architecture, where physiological data of a person are collected by several sensors, next, a Raspberry Pi joins the information and makes a standardization process, then, these data are sent to the Cloud to be processed. Our Cloud system stores the received data and makes a data fusion process in order to indicate the athlete&rsquo, s fatigue status at every moment. This system has been tested in collaboration with a small group of voluntary tri-athletes. A network simulation has been performed to plan a monitoring network for a bigger group of athletes. Finally, we have found that this system is useful for medium-term monitoring of the sports activities.

Exposure to extremely low frequency electromagnetic fields (ELFs) is almost inevitable almost anywhere in the world. An ELF magnetic field (ELF-MF) of around 1 mG = 0.1 &mu, T is typically measured in any home of the world with a certain degree of development and well-being. There is fear and concern about exposure to electromagnetic fields from high- and medium-voltage wiring and transformer stations, especially internal transformer stations (TSs), which in Spain are commonly located inside residential buildings on the ground floor. It is common for neighbors living near these stations to ask for stations to be moved away from their homes, and to ask for information about exposure levels and their effects. Municipality is the closest administration to the citizens that must solve this situation, mediating between the citizens, the utility companies and the national administration. In this case, the municipality of Silla (Val&egrave, ncia, Spain) wanted to know the levels of exposure in the dwellings annexed to the TSs, to compare them with Spanish legislation and the recommendations coming from epidemiological studies. This article presents the first systematic campaign of ELF-MF measurements from TSs carried out in a Spanish city. Many measurements were carried out in the rooms of the apartments doing spatial averages of spatial grid measurements. Measurements are made in the bed and bedrooms and a weighted average and an environmental impact indicator were obtained for each location. We found that old TSs usually provide the highest peak exposure levels. A notable result of this work is that approximately one quarter of the population living above or next to a TS would be exposed to a weighted MF level greater than 0.3 &mu, T, and that about a 10% of this population would not be able to relocate their bedroom or living room to minimize the level of exposure.

We measured the frequency stability of fully integrated self-sustained CMOS-MEMS oscillators and compared it with the theoretical thermomechanical limit. Experimental data obtained from a fully CMOS compatible CC-Beam MEMS resonator with on-chip capacitive readout and electrostatic excitation in open- and closed-loop configuration is provided. Our results show that the frequency stability is 1.8 ppm in ambient air conditions for an integration time of 40ms, and 0.63 ppm in vacuum, being only two times larger than the ultimate limit set by the thermomechanical vibrations.

A nonlinear electromechanical model for microbeam resonators considering, among others, the thermal effect is presented and compared to experimental data. The model is used to determine the conditions to achieve bistability and is validated on a submicrometer scale CMOS-MEMS resonator using thermal tuning.

We analyze the evolution of SRAM memory logic contents under irradiation by defining the memory state as the number of cells storing a given logic value (i.e. number of cells storing a logic-1). We find that the memory state evolution under irradiation follows an Ehrenfest urn model due to the constant effect of single event upsets, and that in large memories it can be associated to an Ornstein-Uhlenbeck process. Memory state transient analysis has been applied to determine the device Soft error rate for an SRAM fabricated in a 65 nm commercial CMOS process obtaining a very good correlation. Furthermore, our analysis shows that the technique is applicable to systems composed by various dissimilar memory components, providing–under certain circumstances–the specific Soft Error Rate of each component.

Eight-transistor (8T) cells were introduced to improve variability tolerance, cell stability and low-voltage operation in high-speed SRAM caches by decoupling the read and write design requirements. Altogether, 8T-SRAM can be designed without significant area penalty over 6T-SRAM. Ionizing radiation effects are nowadays a major concern for reliability and dependability of emerging electronic SRAM devices, even for sea-level applications. In this paper we demonstrate from experimental results that the 8T-SRAM also exhibits an enhanced overall intrinsic tolerance to alpha particle radiation even though its critical charge values are smaller than conventional 6T cells. We have experimentally found that the soft error rate measured in accelerated experiments with alpha particles in SRAM devices implemented in a 65 nm CMOS is 56% better for 8T cells with respect to standard 6T-cells. Even more, we show that this value can be increased up to a 200% through transistor sizing optimization.

[ES] Hoy en día el tráfico de video de internetsignifica alrededor del 65-70% del tráfico total. Se prevéque en 2019 aumente hasta el 80%. Debido a esto se hacenecesario optimizar y mejorar las tecnologías relacionadascon la transmisión de video para garantizar una calidad deexperiencia adecuada. Es por ello que se están desarrollando nuevos protocolos de transmisión de videoadaptativos basados en DASH. Debido a que su uso estáaumentando en los últimos años para realizar streamingsobre HTTP. En este artículo presentamos la herramientaMediaDASH Tool, la cual es una aplicación web quepermite de manera muy intuitiva poder comprimir ypreparar videos para su difusión con DASH. Así como suposterior visualización a través de la misma plataforma.Esta herramienta puede ser de gran utilidad para usuariosfinales que quieran disponer de su sistema DASH comotambién para investigadores que quieran testear suscontenidos multimedia haciendo uso de estos protocolos., Este trabajo ha sido parcialmente subvencionado por la Universitat de València a través de los proyectos UVINV-PRECOMP14-207134, UV-INVAE15-339582, por la Generalitat Valenciana a través del proyecto GV2016-002 y por el Ministerio de Economía a través del proyecto BIA2016-76957-C3-1-R.

Although much work has been done since wireless sensor networks appeared, there is not a great deal of information available on real deployments that incorporate basic features associated with these networks, in particular multihop routing and long lifetimes features. In this article, an environmental monitoring application (Internet of Things oriented) is described, where temperature and relative humidity samples are taken by each mote at a rate of 2 samples/min and sent to a sink using multihop routing. Our goal is to analyse the different strategies to gather the information from the different motes in this context. The trade-offs between ‘sending always’ and ‘buffering locally’ approaches were analysed and validated experimentally, taking into account power consumption, lifetime, efficiency and reliability. When buffering locally, different options were considered such as saving in either local RAM or FLASH memory, as well different alternatives to reduce overhead with different packet sizes. The conclusion is that in terms of energy and durability, the best option is to reduce the overhead. Nevertheless, sending larger packets is not worthy when the probability of retransmission is high. If real-time monitoring is required, then sending always is better than buffering locally.

[EN] IoT is a concept referred to a network of common objects interconnected through the Internet. This is one of the main areas with growing interest and also necessary for the Telecommunication and Telematics Engineering students. The main constraints which face the students with IoT are the integration of the hardware as well as the need for management systems to handle the amount of data they generate by specific software. This work shows some experiences done by a group of students in the Telematics Engineering Degree and the Master of Telecommunications., [ES] IoT es un concepto que hace referencia a una red de objetos cotidianos interconectados a través de Internet. Esta es una de las áreas de creciente interés y necesario conocimiento para los estudiantes de Ingeniería de Telecomunicaciones/Telemática. Los principales obstáculos a los que se enfrentan los estudiantes con IoT son por un lado la integración del hardware, así como la necesidad de disponer de sistemas de gestión para manejar el volumen de datos que generan. Este trabajo muestra unas experiencias realizadas con un grupo de estudiantes en el grado de ingeniería telemática y en el máster de telecomunicación., Proyecto financiado por la Universitat de València UV-SFPIE RMD17-587626