Search

Coenzyme B(12)-dependent acyl-CoA mutases are radical enzymes catalyzing reversible carbon skeleton rearrangements in carboxylic acids. Here, we describe 2-hydroxyisobutyryl-CoA mutase (HCM) found in the bacterium Aquincola tertiaricarbonis as a novel member of the mutase family. HCM specifically catalyzes the interconversion of 2-hydroxyisobutyryl- and (S)-3-hydroxybutyryl-CoA. Like isobutyryl-CoA mutase, HCM consists of a large substrate- and a small B(12)-binding subunit, HcmA and HcmB, respectively. However, it is thus far the only acyl-CoA mutase showing substrate specificity for hydroxylated carboxylic acids. Complete loss of 2-hydroxyisobutyric acid degradation capacity in hcmA and hcmB knock-out mutants established the central role of HCM in A. tertiaricarbonis for degrading substrates bearing a tert-butyl moiety, such as the fuel oxygenate methyl tert-butyl ether (MTBE) and its metabolites. Sequence analysis revealed several HCM-like enzymes in other bacterial strains not related to MTBE degradation, indicating that HCM may also be involved in other pathways. In all strains, hcmA and hcmB are associated with genes encoding for a putative acyl-CoA synthetase and a MeaB-like chaperone. Activity and substrate specificity of wild-type enzyme and active site mutants HcmA I90V, I90F, and I90Y clearly demonstrated that HCM belongs to a new subfamily of B(12)-dependent acyl-CoA mutases.

Alkanes are major constituents of plant-derived waxy materials. In this study, we investigated the abundance, community structure and activity of bacteria harbouring the alkane monooxygenase gene alkB, which catalyses a major step in the pathway of aerobic alkane degradation in the litter layer, the litter-soil interface and in bulk soil at three time points during the degradation of maize and pea plant litter (2, 8 and 30 weeks) to improve our understanding about drivers for microbial performance in different soil compartments. Soil cores of different soil textures (sandy and silty) were taken from an agricultural field and incubated at constant laboratory conditions. The abundance of alkB genes and transcripts (by qPCR) as well as the community structure (by terminal restriction fragment polymorphism fingerprinting) were measured in combination with the concentrations and composition of alkanes. The results obtained indicate a clear response pattern of all investigated biotic and abiotic parameters depending on the applied litter material, the type of soil used, the time point of sampling and the soil compartment studied. As expected the distribution of alkanes of different chain length formed a steep gradient from the litter layer to the bulk soil. Mainly in the two upper soil compartments community structure and abundance patterns of alkB were driven by the applied litter type and its degradation. Surprisingly, the differences between the compartments in one soil were more pronounced than the differences between similar compartments in the two soils studied. This indicates the necessity for analysing processes in different soil compartments to improve our mechanistic understanding of the dynamics of distinct functional groups of microbes.

Control or removal of undesired biofilms has frequently been found to be quite difficult. In addition to biocidal or antibiotic chemicals or materials designed to prevent biofouling, biological control agents appear to be promising. Reports of bacterial predators eradicating biofilms or eliminating pathogens motivate a more systematic screening of biofilm-eliminating bacterial predators. Unfortunately, the analysis of the eradication process is demanding. In the present study, chip-calorimetry was applied to monitor the elimination of Pseudomonas sp. biofilms by Bdellovibrio bacteriovorus. The method uses metabolic heat as a real-time parameter for biofilm activity. The method is non-invasive, fast and convenient due to real-time data acquisition. In addition, heat-production data can reveal information about the energetics of the predator-prey interaction. The calorimetric results were validated by confocal laser scanning microscopy. The approach described may be useful for the screening of biofilm susceptibility to different predators.

Dye adsorption plays a crucial role in dye-sensitized solar cells. Herein, we demonstrate an in situ liquid-phase analytical technique to quantify in real time adsorption of dye and coadsorbates on flat and mesoporous TiO(2) films. For the first time, a molar ratio of co-adsorbed Y123 and chenodeoxycholic acid has been measured.

Summary Mycelia of fungi and soil oomycetes have recently been found to act as effective paths boosting bacterial mobility and bioaccessibility of contaminants in vadose environments. In this study, we demonstrate that mycelia can be used for targeted separation and isolation of contaminant-degrading bacteria from soil. In a ‘proof of concept’ study we developed a novel approach to isolate bacteria from contaminated soil using mycelia of the soil oomycete Pythium ultimum as translocation networks for bacteria and the polycyclic aromatic hydrocarbon naphthalene (NAPH) as selective carbon source. NAPH-degrading bacterial isolates were affiliated with the genera Xanthomonas, Rhodococcus and Pseudomonas. Except for Rhodococcus the NAPH-degrading isolates exhibited significant motility as observed in standard swarming and swimming motility assays. All steps of the isolation procedures were followed by cultivation-independent terminal 16S rRNA gene terminal fragment length polymorphism (T-RFLP) analysis. Interestingly, a high similarity (63%) between both the cultivable NAPH-degrading migrant and the cultivable parent soil bacterial community profiles was observed. This suggests that mycelial networks generally confer mobility to native, contaminant-degrading soil bacteria. Targeted, mycelia-based dispersal hence may have high potential for the isolation of bacteria with biotechnologically useful properties.

Microbial contaminant degradation may either result in the utilization of the compound for growth or act as a protective mechanism against its toxicity. Bioavailability of contaminants for nutrition and toxicity has opposite consequences which may have resulted in quite different bacterial adaptation mechanisms; these may particularly interfere when a growth substrate causes toxicity at high bioavailability. Recently, it has been demonstrated that a high bioavailability of vapour-phase naphthalene (NAPH) leads to chemotactic movement of NAPH-degrading Pseudomonas putida (NAH7) G7 away from the NAPH source. To investigate the balance of toxic defence and substrate utilization, we tested the influence of the cell density on surface-associated growth of strain PpG7 at different positions in vapour-phase NAPH gradients. Controlled microcosm experiments revealed that high cell densities increased growth rates close (< 2 cm) to the NAPH source, whereas competition for NAPH decreased the growth rates at larger distances despite the high gas phase diffusivity of NAPH. At larger distance, less microbial biomass was likewise sustained by the vapour-phase NAPH. Such varying growth kinetics is explained by a combination of bioavailability restrictions and NAPH-based inhibition. To account for this balance, a novel, integrated ‘Best Equation’ describing microbial growth influenced by substrate availability and inhibition is presented.

Bacterial degradation pathways of fuel oxygenates such as methyl tert -butyl and tert -amyl methyl ether (MTBE and TAME, respectively) have already been studied in some detail. However, many of the involved enzymes are still unknown, and possible side reactions have not yet been considered. In Aquincola tertiaricarbonis L108, Methylibium petroleiphilum PM1, and Methylibium sp. strain R8, we have now detected volatile hydrocarbons as by-products of the degradation of the tert -alkyl ether metabolites tert -butyl and tert -amyl alcohol (TBA and TAA, respectively). The alkene isobutene was formed only during TBA catabolism, while the beta and gamma isomers of isoamylene were produced only during TAA conversion. Both tert -alkyl alcohol degradation and alkene production were strictly oxygen dependent. However, the relative contribution of the dehydration reaction to total alcohol conversion increased with decreasing oxygen concentrations. In resting-cell experiments where the headspace oxygen content was adjusted to less than 2%, more than 50% of the TAA was converted to isoamylene. Isobutene formation from TBA was about 20-fold lower, reaching up to 4% alcohol turnover at low oxygen concentrations. It is likely that the putative tert -alkyl alcohol monooxygenase MdpJ, belonging to the Rieske nonheme mononuclear iron enzymes and found in all three strains tested, or an associated enzymatic step catalyzed the unusual elimination reaction. This was also supported by the detection of mdpJK genes in MTBE-degrading and isobutene-emitting enrichment cultures obtained from two treatment ponds operating at Leuna, Germany. The possible use of alkene formation as an easy-to-measure indicator of aerobic fuel oxygenate biodegradation in contaminated aquifers is discussed.

Wastewater treatment often suffers from instabilities and the failure of specific functions such as biological phosphorus removal by polyphosphate accumulating organisms. Since most of the microorganisms involved in water clarification are unknown it is challenging to operate the process accounting for the permanent varying abiotic parameters and the complex composition and unrevealed metabolic capacity of a wastewater microbial community. Fulfilling the demands for water quality irrespective of substrate inflow conditions may emit severe problems if the limited management resources of municipal wastewater treatment plants are regarded. We used flow cytometric analyses of cellular DNA and polyphosphate to create patterns mirroring dynamics in community structure. These patterns were resolved in up to 15 subclusters, the presence and abundances of which correlated with abiotic data. The study used biostatistics to determine the kind and strength of the correlation. Samples investigated were obtained from a primary clarifier and two activated sludge basins. The stability of microbial community structure was found to be high in the basins and low in the primary clarifier. Despite major abiotic changes certain subcommunities were dominantly present (up to 80% stability), whereas others emerged only sporadically (down to 3% stability, both according to equivalence testing). Additionally, subcommunities of diagnostic value were detected showing positive correlation with substrate influxes. For instance blackwater (r(s) = 0.5) and brewery inflow (both r(s) = 0.6) were mirrored by increases in cell abundances in subclusters 1 and 6 as well as 4 and 8, respectively. Phosphate accumulation was obviously positively correlated with nitrate (r(s) = 0.4) and the presence of denitrifying organisms (Rhodacyclaceae). Various other correlations between community structure and abiotic parameters were apparent. The bacterial composition of certain subcommunities was determined by cell sorting and phylogenetic tools like T-RFLP. In essence, we developed a monitoring tool which is quick, cheap and causal in its interpretation. It will make laborious PCR based technique less obligatory as it allows reliable process monitoring and control in wastewater treatment plants.

In theory, heat production rates are very well suited for analysing and controlling bioprocesses on different scales from a few nanolitres up to many cubic metres. Any bioconversion is accompanied by a production (exothermic) or consumption (endothermic) of heat. The heat is tightly connected with the stoichiometry of the bioprocess via the law of Hess, and its rate is connected to the kinetics of the process. Heat signals provide real-time information of bioprocesses. The combination of heat measurements with respirometry is theoretically suited for the quantification of the coupling between catabolic and anabolic reactions. Heat measurements have also practical advantages. Unlike most other biochemical sensors, thermal transducers can be mounted in a protected way that prevents fouling, thereby minimizing response drifts. Finally, calorimetry works in optically opaque solutions and does not require labelling or reactants. It is surprising to see that despite all these advantages, calorimetry has rarely been applied to monitor and control bioprocesses with intact cells in the laboratory, industrial bioreactors or ecosystems. This review article analyses the reasons for this omission, discusses the additional information calorimetry can provide in comparison with respirometry and presents miniaturization as a potential way to overcome some inherent weaknesses of conventional calorimetry. It will be discussed for which sample types and scientific question miniaturized calorimeter can be advantageously applied. A few examples from different fields of microbiological and biotechnological research will illustrate the potentials and limitations of chip calorimetry. Finally, the future of chip calorimetry is addressed in an outlook.

Fourier-transform infrared (FT-IR) spectroscopy is known as a high-resolution method for the rapid identification of pure cultures of microorganisms. Here, we evaluated FT-IR as a method for the quantification of bacterial populations in binary mixed cultures consisting of Pseudomonas putida and Rhodococcus ruber. A calibration procedure based on Principal Component Regression was developed for estimating the ratio of the bacterial species. Data for method calibration were gained from pure cultures and artificially assembled communities of known ratios of the two member populations. Moreover, to account for physiological variability, FT-IR measurements were performed with organisms sampled at different growth phases. Measurements and data analyses were subsequently applied to growing mixed cultures revealing that growth of R. ruber was almost completely suppressed in co-culture with P. putida. Population ratios obtained by fatty acid analysis as an independent reference method were in high agreement with the FT-IR derived ratios.

The performance of biodegradation of organic pollutants in soil often depends on abiotic conditions and the bioavailability of these pollutants to degrading bacteria. In this context, bacterial dispersal is an essential aspect. Recent studies on the potential promotion of bacterial dispersal by fungal hyphae raised the idea of specifically applying fungal networks to accelerate bacterial degradation processes in situ. Our objective is to investigate these processes and their performance via simulation modelling and address the following questions: (1) Under what abiotic conditions can dispersal networks significantly improve bacterial degradation? and (2) To what extent does the spatial configuration of the networks influence the degradation performance? To answer these questions, we developed a spatially explicit bacterial colony model, which is applied to controlled laboratory experiments with Pseudomonas putida G7 organisms as a case study. Using this model, we analyzed degradation performance in response to different environmental scenarios and showed that conditions of limited bacterial dispersal also limit degradation performance. Under such conditions, dispersal networks have the highest potential for improving the bioavailability of pollutants to bacteria. We also found that degradation performance significantly varies with the spatial configuration of the dispersal networks applied and the time horizon over which performance is assessed. Regarding future practical applications, our results suggest that (1) fungal networks may dramatically improve initially adverse conditions for biodegradation of pollutants in soil, and (2) the network's spatial structure and accessibility are decisive for the success of such tasks.

Limited information exists on influences of the diffusive transport of volatile organic contaminants (VOC) on bacterial activity in the unsaturated zone of the terrestrial subsurface. Diffusion of VOC in the vapor-phase is much more efficient than in water and results in effective VOC transport and high bioavailability despite restricted mobility of bacteria in the vadose zone. Since many bacteria tend to accumulate at solid-water, solid-air and air–water interfaces, such phase boundaries are of a special interest for VOC-biodegradation. In an attempt to evaluate microbial activity toward air-borne substrates, this study investigated the spatio-temporal interplay between growth of Pseudomonas putida (NAH7) on vapor-phase naphthalene (NAPH) and its repercussion on vapor-phase NAPH concentrations. Our data demonstrate that growth rates of strain PpG7 were inversely correlated to the distance from the source of vapor-phase NAPH. Despite the high gas phase diffusivity of NAPH, microbial growth was absent at distances above 5 cm from the source when sufficient biomass was located in between. This indicates a high efficiency of suspended bacteria to acquire vapor-phase compounds and influence headspace concentration gradients at the centimeter-scale. It further suggests a crucial role of microorganisms as biofilters for gas-phase VOC emanating from contaminated groundwater or soil.

Isothermal microcalorimetry can be used to investigate the photosynthetic energy conversion of autotrophic organisms. In this study, for the first time a diatom alga was used to compare the calorimetrically measured heat flux with measurements of the photosynthetic performance by oxygen evolution and pulse-amplitude modulated fluorescence. The presented experimental setup proved suitable to compare calorimetric data with those of conventional methods of the determination of photosynthesis rates. Special attention was paid to the contribution of energy dissipation via non-photochemical quenching (NPQ) of chlorophyll fluorescence to the metabolic energy balance. This was achieved by a combination of different light conditions and the use of an inhibitor of NPQ. Although NPQ is an important photoprotective mechanism in diatoms, the inhibition of NPQ resulted in an activation of alternative, energy dissipating pathways for absorbed radiation which completely compensated for the fraction of energy dissipation by NPQ.

onitswayfromthelabtonature.Butatthesametime,newhope with the contrasting perception that pollutant degradation can beunderstood as an ecosystem service that sometimes simply emerges whenenvironments are managed the right way.Today environmental biotechnology development is driven by methodo-logical andconceptualadvancesbridgingthegapbetweenthebiochemistry,physicochemistry

The role of bacterial growth and translocation for the bioremediation of organic contaminants in the vadose zone is poorly understood. Whereas air-filled pores restrict the mobility of bacteria, diffusion of volatile organic compounds in air is more efficient than in water. Past research, however, has focused on chemotactic swimming of bacteria along gradients of water-dissolved chemicals. In this study we tested if and to what extent Pseudomonas putida PpG7 (NAH7) chemotactically reacts to vapor-phase gradients forming above their swimming medium by the volatilization from a spot source of solid naphthalene. The development of an aqueous naphthalene gradient by air-water partitioning was largely suppressed by means of activated carbon in the agar. Surprisingly, strain PpG7 was repelled by vapor-phase naphthalene although the steady state gaseous concentrations were 50-100 times lower than the aqueous concentrations that result in positive chemotaxis of the same strain. It is thus assumed that the efficient gas-phase diffusion resulting in a steady, and possibly toxic, naphthalene flux to the cells controlled the chemotactic reaction rather than the concentration to which the cells were exposed. To our knowledge this is the first demonstration of apparent chemotactic behavior of bacteria in response to vapor-phase effector gradients.

Aims: This study intended to unravel the physiological interplay in an anaerobic microbial community that degrades toluene under sulfate-reducing conditions combining proteomic and genetic techniques. Methods and Results: An enriched toluene-degrading community (Zz5-7) growing in batch cultures was investigated by DNA- and protein-based analyses. The affiliation and diversity of the community were analysed using 16S ribosomal RNA (rRNA) genes as a phylogenetic marker as well as bssA and dsrAB genes as functional markers. Metaproteome analysis was carried out by a global protein extraction and a subsequent protein separation by two-dimensional gel electrophoresis (2-DE). About 85% of the proteins in the spots were identified by nano-liquid chromatography coupled with electrospray mass spectrometry (nano-LC–ESI-MS/MS) analysis. DNA sequencing of bssA and the most abundant dsrAB amplicons revealed high similarities to a member of the Desulfobulbaceae, which was also predominant according to 16S rRNA gene amplicons. Metaproteome analysis provided 202 unambiguous protein identifications derived from 236 unique protein spots. The proteins involved in anaerobic toluene activation, dissimilatory sulfate reduction, hydrogen production/consumption and autotrophic carbon fixation were mainly affiliated to members of the Desulfobulbaceae and several other Deltaproteobacteria. Conclusion: Phylogenetic and metaproteomic analyses revealed a member of the Desulfobulbaceae as the key player of anaerobic toluene degradation in a sulfate-reducing consortium. Significance and Impact of the Study: This is the first study that combines genetic and proteomic analyses to indicate the interactions in an anaerobic toluene-degrading microbial consortium.

Calorimetry can be used for a noninvasive monitoring of metabolic and energy changes in bacterial cultures in real time. This potentially includes changes occurring during phage infection cycles. To demonstrate this, the growth of Escherichia coli K124 F− carrying the lambda prophage was monitored in a reaction calorimeter, while inducing the shift from lysogeny to lysis using methotrexate (MTX) as the inducer. Different phases of the phage infection were distinguishable calorimetrically. The calorimetric signals corresponded well to changes in growth stoichiometry and kinetics that were measured non-calorimetrically. The comparison of the calorimetric results with other measurements of activity revealed that the calorimetric method was superior since the calorimetric data mirrored the progress of infection in more detail. Contradictions between the calorimetric data and the appearance of infectious phages could result from inactivation of phage by MTX.

Electrokinetically stimulated bioremediation of soils (electro-bioremediation) requires that the application of weak electric fields has no negative effect on the contaminant degrading microbial communities. This study evaluated the hypothesis that weak direct electric current (DC) fields per se do not negatively influence the physiology and composition of soil microbial communities given that secondary electrokinetic phenomena such as soil pH changes and temperatures are minimized. Mildly buffered, water-saturated laboratory mesocosms with agricultural soil were subjected for 34 days to a constant electric field (X=1.4 V cm(-1); J approximately 1.0 mA cm(-2)) and the spatiotemporal changes of soil microbial communities assessed by fingerprints of phospholipids fatty acids (PLFA) and terminal restriction fragment length polymorphisms (T-RFLP) of bacterial 16S rRNA genes. DC-induced electrolysis of the pore water led to pH changes (

In this study, a methylotrophic bacterium, Methylobacterium rhodesianum MB 126, was used for the production of the chiral compound ( R )-3-hydroxybutyrate ( R -3HB) from methanol. R -3HB is formed during intracellular degradation of the storage polymer ( R )-3-polyhydroxybutyrate (PHB). Since the monomer R -3HB does not accumulate under natural conditions, M. rhodesianum was genetically modified. The gene ( hbd ) encoding the R -3HB-degrading enzyme, R -3HB dehydrogenase, was inactivated in M. rhodesianum . The resulting hbd mutant still exhibited low growth rates on R -3HB as the sole source of carbon and energy, indicating the presence of alternative pathways for R -3HB utilization. Therefore, transposon mutagenesis was carried out with the hbd mutant, and a double mutant unable to grow on R -3HB was obtained. This mutant was shown to be defective in lipoic acid synthase (LipA), resulting in an incomplete citric acid cycle. Using the hbd lipA mutant, we produced 3.2 to 3.5 mM R -3HB in batch and 27 mM (2,800 mg liter −1 ) in fed-batch cultures. This was achieved by sequences of cultivation conditions initially favoring growth, then PHB accumulation, and finally PHB degradation.

The environmental fate and, in particular, biodegradation rates of hydrophobic organic compounds (HOC) are of high interest due to the ubiquity, persistence, and potential health effects of these compounds. HOC tend to interact with bioreactor materials and sampling devices and are frequently volatile, so that conventionally derived degradation parameters are often biased. We report on the development and validation of a novel calorimetric approach that serves to gain real time information on the kinetics and the physiology of HOC bioconversion in aqueous systems while overcoming weaknesses of conventional biodegradation experiments. Soil bacteria Mycobacterium frederiksbergense LB501T, Rhodococcus erythropolis K2-3 and Pseudomonas putida G7 were exposed to pulsed titrations of dissolved anthracene, 4-(2,4-dichlorophenoxy)butyric acid or naphthalene, respectively, and the thermal responses were monitored. The combinations of strains and pollutants were selected as examples for complete and partial biodegradation and complete degradation with storage product formation, respectively. Heat production signals were interpreted thermodynamically and in terms of Michaelis-Menten kinetics. The half-saturation constant k(D) and the degradation rate r(D)(Max) were derived. Comparison with conventional methods shows the suitability to extract kinetic degradation parameters of organic trace pollutants from simple ITC experiments, while thermodynamic interpretation provided further information about the metabolic fate of HOC compounds.

The metabolic incorporation of stable isotopes such as (13)C or (15)N into proteins has become a powerful tool for qualitative and quantitative proteome studies. We recently introduced a method that monitors heavy isotope incorporation into proteins and presented data revealing the metabolic activity of various species in a microbial consortium using this technique. To further develop our method using an liquid chromatography (LC)-mass spectrometry (MS)-based approach, we present here a novel approach for calculating the incorporation level of (13)C into peptides by using the information given in the decimal places of peptide masses obtained by modern high-resolution MS. In the present study, the applicability of this approach is demonstrated using Pseudomonas putida ML2 proteins uniformly labeled via the consumption of [(13)C(6)]benzene present in the medium at concentrations of 0, 10, 25, 50, and 100 atom %. The incorporation of (13)C was calculated on the basis of several labeled peptides derived from one band on an SDS-PAGE gel. The accuracy of the calculated incorporation level depended upon the number of peptide masses included in the analysis, and it was observed that at least 100 peptide masses were required to reduce the deviation below 4 atom %. This accuracy was comparable with calculations of incorporation based on the isotope envelope. Furthermore, this method can be extended to the calculation of the labeling efficiency for a wide range of biomolecules, including RNA and DNA. The technique will therefore allow a highly accurate determination of the carbon flux in microbial consortia with a direct approach based solely on LC-MS.

Ciliates (or Ciliophora) are ubiquitous organisms which can be widely used as bioindicators in ecosystems exposed to anthropogenic and industrial influences. The evaluation of the environmental impact on soil ciliate communities with methods relying on morphology-based identification may be hampered by the large number of samples usually required for a statistically supported, reliable conclusion. Cultivation-independent molecular-biological diagnostic tools are a promising alternative to greatly simplify and accelerate such studies. In this present work a ciliate-specific fingerprint method based on the amplification of a phylogenetic marker gene (i.e. the 18S ribosomal RNA gene) with subsequent analysis by denaturing gradient gel electrophoresis (DGGE) was developed and used to monitor community shifts in a polycyclic aromatic hydrocarbon (PAH) polluted soil. The semi-nested approach generated ciliate-specific amplification products from all soil samples and allowed to distinguish community profiles from a PAH-polluted and a non-polluted control soil. Subsequent sequence analysis of excised bands provided evidence that polluted soil samples are dominated by organisms belonging to the class Colpodea. The general DGGE approach presented in this study might thus in principle serve as a fast and reproducible diagnostic tool, complementing and facilitating future ecological and ecotoxicological monitoring of ciliates in polluted habitats.

Heterogeneity of industrial production cultures is accepted to a certain degree; however, the underlying mechanisms are seldom perceived or included in the development of new bioprocess control strategies. Population heterogeneity and its basics, perceptible in the diverse proficiency of cells, begins with asymmetric birth and is found to recess during the life cycle. Since inefficient subpopulations have significant impact on the productivity of industrial cultures, cellular heterogeneity needs to be detected and quantified by using high speed detection tools like flow cytometry. Possible origins of population heterogeneity, sophisticated fluorescent techniques for detection of individual cell states, and cutting-edge Omics-technologies for extended information beyond the resolution of fluorescent labelling are highlighted.

A sulfate-reducing bacterial consortium was enriched from an anoxic aquifer contaminated with BTEX compounds, using toluene as a growth substrate. Total cell counts, protein contents and sulfide production were determined to follow growth at the in situ temperature (14 degrees C) and at 25 degrees C, respectively. Community members were identified by 16S rRNA gene cloning and sequencing. Phylogenetic analysis revealed 12 sequence types belonging to Deltaproteobacteria (several groups), Epsilonproteobacteria, Bacteroidetes, Spirochaetaceae and an unclassified bacterial clade. The most prominent phylotype comprising 34% of all clones was affiliated to the Desulfobulbaceae and closely related to environmental clones retrieved from hydrocarbon-contaminated aquifers. Flow-cytometric methods were applied to analyze the community dynamics and to identify key organisms involved in toluene assimilation. Flow-cytometric measurement of DNA contents and scatter behavior served to detect and quantify dominant and newly emerging clusters of subcommunities. Up to seven subcommunities, two of them dominant, were distinguished. Cell sorting was used to facilitate the analysis of conspicuous clusters for phylogenetic identity by terminal restriction fragment length polymorphism profiling of the 16S rRNA genes. The Desulfobulbaceae phylotype accounted for up to 87% in proliferating subcommunities, indicating that it represents the key organism of toluene degradation within this complex anaerobic consortium.

The classical concept of arsenic transfer into plants through arsenate uptake via phosphate transporters, reduction to arsenite, complexation and compartmentation within vacuoles is challenged by recent identification of bidirectional transporters for arsenite and their potential role in plant As status regulation. Soil-based studies with chemical analysis of soil solution require root mat formation amplifying root effects on their surroundings and additionally denying investigations along individual roots differing in age and function. We tried to overcome these shortcomings by using bioreporter bacteria to visualise the spatial distribution of inorganic arsenic along roots and to characterize inorganic arsenic gradients in the rhizosphere concurrent with root age and branching. Therefore we developed an agar-based carrier element ensuring intimate contact between bioreporters and root-soil system and enabling fast and easy reporter output analysis. We show that inorganic arsenic distribution is related to root development with the highest bioreporter signal induction around lateral roots, which are known to show the highest expression of transporters responsible for bidirectional arsenite flux. Since there is so far no evidence for an arsenate efflux mechanism this is a strong indicator that we observed rather arsenite than arsenate efflux. No signal was detected along the distal region of young adventitious roots, i.e. the region of extension growth and root hair formation. The novel bioreporter assay may thus complement conventional measurements by providing information on the spatial distribution of inorganic arsenic on mm to cm-scale.

The exploitation of microorganisms in natural or technological systems calls for monitoring tools that reflect their metabolic activity in real time and, if necessary, are flexible enough for field application. The Gibbs energy dissipation of assimilated substrates or photons often in the form of heat is a general feature of life processes and thus, in principle, available to monitor and control microbial dynamics. Furthermore, the combination of measured heat fluxes with material fluxes allows the application of Hess' law to either prove expected growth stoichiometries and kinetics or identify and estimate unexpected side reactions. The combination of calorimetry with respirometry is theoretically suited for the quantification of the degree of coupling between catabolic and anabolic reactions. New calorimeter developments overcome the weaknesses of conventional devices, which hitherto limited the full exploitation of this powerful analytical tool. Calorimetric systems can be integrated easily into natural and technological systems of interest. They are potentially suited for high-throughput measurements and are robust enough for field deployment. This review explains what information calorimetric analyses provide; it introduces newly emerging calorimetric techniques and it exemplifies the application of calorimetry in different fields of microbial research.

Wastewater treatment plants with enhanced biological phosphorus removal represent a state-of-the-art technology. Nevertheless, the process of phosphate removal is prone to occasional failure. One reason is the lack of knowledge about the structure and function of the bacterial communities involved. Most of the bacteria are still not cultivable, and their functions during the wastewater treatment process are therefore unknown or subject of speculation. Here, flow cytometry was used to identify bacteria capable of polyphosphate accumulation within highly diverse communities. A novel fluorescent staining technique for the quantitative detection of polyphosphate granules on the cellular level was developed. It uses the bright green fluorescence of the antibiotic tetracycline when it complexes the divalent cations acting as a countercharge in polyphosphate granules. The dynamics of cellular DNA contents and cell sizes as growth indicators were determined in parallel to detect the most active polyphosphate-accumulating individuals/subcommunities and to determine their phylogenetic affiliation upon cell sorting. Phylotypes known as polyphosphate-accumulating organisms, such as a “ Candidatus Accumulibacter”-like phylotype, were found, as well as members of the genera Pseudomonas and Tetrasphaera . The new method allows fast and convenient monitoring of the growth and polyphosphate accumulation dynamics of not-yet-cultivated bacteria in wastewater bacterial communities.

Long-term preservation of bioreporter bacteria is essential for the functioning of cell-based detection devices, particularly when field application, e.g., in developing countries, is intended. We varied the culture conditions (i.e., the NaCl content of the medium), storage protection media, and preservation methods (vacuum drying vs. encapsulation gels remaining hydrated) in order to achieve optimal preservation of the activity of As (III) bioreporter bacteria during up to 12 weeks of storage at 4 degrees C. The presence of 2% sodium chloride during the cultivation improved the response intensity of some bioreporters upon reconstitution, particularly of those that had been dried and stored in the presence of sucrose or trehalose and 10% gelatin. The most satisfying, stable response to arsenite after 12 weeks storage was obtained with cells that had been dried in the presence of 34% trehalose and 1.5% polyvinylpyrrolidone. Amendments of peptone, meat extract, sodium ascorbate, and sodium glutamate preserved the bioreporter activity only for the first 2 weeks, but not during long-term storage. Only short-term stability was also achieved when bioreporter bacteria were encapsulated in gels remaining hydrated during storage.

The ability of brewing yeast to flocculate is an important feature for brewing of qualitatively good beer. Flocculation involves two main cell wall structures, which are the flocculation proteins (flocculins) and mannans, to which these flocculins bind. Unfortunately, in practice, the flocculation ability may get lost after several repitches. Flow cytometry was employed to analyze glucose and mannose structures of the cell surface by application of fluorescent lectins. Validation of the expression of the flocculin genes Lg-FLO1, FLO1, FLO5, and FLO9 was carried out using microarray techniques. SDS-PAGE, western blot, and ESI-MS/MS analyses served to isolate and determine yeast cell flocculins. Mannose and glucose labeling with fluorescent lectins allowed differentiating powdery and flocculent yeast cells under laboratory conditions. Using microarray techniques and proteomics, the four flocculation genes Lg-FLO1, FLO1, FLO5, FLO9, and the protein Lg-Flo1p were identified as factors of major importance for flocculation. The expression of the genes was several times higher in flocculent yeast cells than in powdery ones. Flow cytometry is a fast and simple method to quantify the proportions of powdery and flocculent yeast cells in suspensions under defined cultivation conditions. However, differentiation under industrial conditions will require mRNA and protein expression profiling.

Quantification of microbial contaminant biodegradation based on stable isotope fractionation analysis (SIFA) relies on known, invariable isotope fractionation factors. The microbially induced isotope fractionation is caused by the preferential cleavage of bonds containing light rather than heavy isotopes. However, a number of non-isotopically sensitive steps preceding the isotopically sensitive bond cleavage may affect the reaction kinetics of a degradation process and reduce the observed (i.e., the macroscopically detectable) isotope fractionation. This introduces uncertainty to the use of isotope fractionation for the quantification of microbial degradation processes. Here, we report on the influence of bacterial cell density on observed stable isotope fractionation. Batch biodegradation experiments were performed under non-growth conditions to quantify the toluene hydrogen isotope fractionation by exposing Pseudomonas putida mt-2(pWWO) at varying cell densities to different concentrations of toluene. Observed isotope fractionation depended significantly on the cell density. When the cell density rose from 5 x 10(5) to 5 x 10(8)cells/mL, the observed isotope fractionation declined by 70% and went along with a 55% decrease of the degradation rates of individual cells. Theoretical estimates showed that uptake-driven diffusion to individual cells depended on cell density via the overlap of the cells' diffusion-controlled boundary layers. Our data suggest that biomass effects on SIFA have to be considered even in well-mixed systems such as the cell suspensions used in this study.

An increased usage of poly-β-hydroxyalkanoates (PHA), for instance as bulk biodegradable and biocompatible plastics, will require a cheaper production and downstream processing. If the synthesis of this intracellular biopolyester could be combined with the production of another valuable intracellular product, the economic balance of the process could be improved. It was found that the moderately halophilic bacterium Halomonas elongata simultaneously synthesizes PHA and a protector molecule, called ectoine. Whereas the synthesis of PHA is a response to the shortage of nutrients, the production of ectoine counteracts osmotic imbalances. This behavior is in so far surprising as the conditions of a bi-factorial stress initiate the fast simultaneous synthesis of ectoine and PHA. In the presence of 100 g/L NaCl, Halomonas elongata accumulated up to 50 % w/w PHA and up to 14 % ectoine within 2–3 days under so far non-optimized conditions. Furthermore, it was found that other Halomonas species (e.g. Halomonas halodenitrificans and own isolates of Halomonas halodeneurihalina and Halomonas salina) were able to produce both ectoine and PHA.

A rapid biological method for the determination of the bioavailability of naphthalene was developed and its value as an alternative to extraction-based chemical approaches demonstrated. Genetically engineered whole-cell biosensors are used to determine bioavailable naphthalene and their responses compared with results from Tenax extraction and chemical analysis. Results show a 1:1 correlation between biosensor results and chemical analyses for naphthalene-contaminated model materials and sediments, but the biosensor assay is much faster. This work demonstrates that biosensor technology can perform as well as standard chemical methods, though with some advantages including the inherent biological relevance of the response, rapid response time, and potential for field deployment. A survey of results from this work and the literature shows that bioavailability under non-equilibrium conditions nonetheless correlates well with K-oc or K-d. A rationale is provided wherein chemical resistance is speculated to be operative. (C) 2008 Elsevier Ltd. All rights reserved.

Traditional methods used for studying communities of aquatic hyphomycetes are based on the detection and identification of their asexual spores under a microscope. These techniques limit detection to aquatic fungi present in sufficient quantity and capable of sporulating under laboratory conditions. Our objective was to develop a molecular approach to detect and monitor all types of fungi (i.e. strictly or facultatively aquatic) in harsh habitats (i.e. groundwater wells and heavily polluted surface water) where fungal biomass may become limited. We developed a semi-nested PCR protocol for fungal 18S ribosomal RNA genes coupled to subsequent analysis of the PCR products by Temperature Gradient Gel Electrophoresis (TGGE) to monitor the fungal community structure in aquatic habitats characterized by a pollution gradient. Our TGGE-protocol was compared with the traditional morphological approach and revealed a higher diversity in groundwaters and in some polluted surface waters. Thus, PCR-TGGE is a promising alternative in particular in habitats with low fungal biomass. The dynamics of fungal biomass and sporulation rates during the first weeks of leaf colonization showed that habitats with adverse ecological conditions allow only reduced fungal growth, which might subsequently impact upper trophic levels and thus interfere with key ecological processes of leaf decomposition.

The microbial communities of in situ reactor columns degrading benzene with sulfate as an electron acceptor were analyzed based on clone libraries and terminal restriction fragment length polymorphism fingerprinting of PCR-amplified 16S rRNA genes. The columns were filled with either lava granules or sand particles and percolated with groundwater from a benzene-contaminated aquifer. The predominant organisms colonizing the lava granules were related to Magnetobacterium sp., followed by a phylotype affiliated to the genera Cryptanaerobacter/Pelotomaculum and several Deltaproteobacteria. From the sand-filled columns, a stable benzene-degrading consortium was established in sand-filled laboratory microcosms under sulfate-reducing conditions. It was composed of Delta- and Epsilonproteobacteria, Clostridia, Chloroflexi, Actinobacteria and Bacteroidetes. The most prominent phylotype of the consortium was related to the genus Sulfurovum, followed by Desulfovibrio sp. and the Cryptanaerobacter/Pelotomaculum phylotype. The proportion of the latter was similar in both communities and significantly increased after repeated benzene-spiking. During cultivation on aromatic substrates other than benzene, the Cryptanaerobacter/Pelotomaculum phylotype was outcompeted by other community members. Hence, this organism appears to be specific for benzene as a growth substrate and might play a key role in benzene degradation in both communities. Based on the possible functions of the community members and thermodynamic calculations, a functional model for syntrophic benzene degradation under sulfate-reducing conditions is proposed.

Analysis of environmental bacteria on the single cell level often requires fixation to store the cells and to keep them in a state as near life-like as possible. Fixation procedures should furthermore counteract the increase of autofluorescence, cell clogging, and distortion of surface characteristics. Additionally, they should meet the specific fixation demands of both aerobically and anaerobically grown bacteria. A fixation method was developed based on metal solutions in combination with sodium azide. The fixation efficiencies of aluminium, barium, bismuth, cobalt, molybdenum, nickel, and tungsten salts were evaluated by flow cytometric measurement of the DNA contents as a bacterial population/community stability marker. Statistical equivalence testing was involved to permit highly reliable flow cytometric pattern evaluation. Investigations were carried out with pure cultures representing environmentally important metabolic and respiratory pathways as controls and with activated sludge as an example for highly diverse bacterial communities. A mixture of 5 mM barium chloride and nickel chloride, each and 10% sodium azide was found to be a suitable fixative for all tested bacteria. The described method provided good sample stability for at least 9 days.

4-Chlorosalicylate (4-CS) can be degraded completely by a bacterial consortium consisting of Pseudomonas reinekei (MT1), Achromobacter spanius (MT3) and Pseudomonas veronii (MT4). The fourth species Wautersiella falsenii (MT2) is thought to act as a ‘necrotizer’ of the community. Single cell approaches were used to follow every species' degradation activity within the community by assuming that growth and proliferation are activity markers for the utilization of 4-CS and its degradation pathway intermediates as carbon and energy sources. A primary/secondary antibody staining technique for species differentiation was applied and a species-resolved determination of proliferation activity by flow cytometry undertaken. Degradation was followed by quantifying 4-CS and the resulting intermediates by HPLC. A good correlation of HPLC bulk data with the proliferation activity states of every species within the community was found. It was also assumed that reduced activity of strain MT4 and increased proliferation of strain MT2 might have caused an observed breakdown of the consortium grown in the bioreactor. The double staining technique provided the chance to follow bacterial cell states and their roles in mixed cultures without applying labelled substrates. It is therefore in line with single cell techniques already successfully applied in biotechnology for developing strategies to optimize microbially catalyzed production processes.

The partial dissipation of Gibbs energy as heat reflects the metabolic dynamic of biofilms in real time and may also allow quantitative conclusions about the chemical composition of the biofilm via Hess' law. Presently, the potential information content of heat is hardly exploited due to the low flexibility, the low throughput and the high price of conventional calorimeters. In order to overcome the limitations of conventional calorimetry a miniaturized calorimeter for biofilm investigations has been evaluated. Using four thermopiles a heat production with spatial and temporal resolutions of 2.5 cm(-1) and 2 s(-1) could be determined. The limit of detection of the heat flow measurement was 20 nW, which corresponds to the cell density of an early stage biofilm (approx. 3x10(5) cells cm(-2)). By separating biofilm cultivation from the actual heat measurement, a high flexibility and a much higher throughput was achieved if compared with conventional calorimeters. The approach suggested allows cultivation of biofilms in places of interest such as technological settings as well as in nature followed by highly efficient measurements in the laboratory. Functionality of the miniaturized calorimeter was supported by parallel measurements with confocal laser scanning microscopy and a fiber optic based oxygen sensor using the oxycaloric equivalent (-460 kJ mol-O2(-1)).

Stable isotope fractionation analysis (SIFA) of contaminants is an emerging technique to characterize in situ microbial activity. The kinetic isotope effect in microbial degradation reactions, or enzyme catalysis, is caused by the preferential cleavage of bonds containing light rather than heavy isotopes. This leads to a relative enrichment of the heavier isotopes in the residual substrate pool. However, a number of nonisotopically sensitive steps preceding the isotopically sensitive bond cleavage may affect the reaction kinetics of a degradation process, thus reducing the observed (i.e., the macroscopically detectable) isotope fractionation. Low bioavailability of contaminants poses kinetic limitations on the biodegradation process and can significantly reduce the observed kinetic isotope fractionation. Here we present experimental evidence for the influence of bioavailability-limited pollutant biodegradation on observed stable isotope fractionation. Batch laboratory experiments were performed to quantify the toluene hydrogen isotope fractionation of Pseudomonas putida mt-2 (pWWO) subjected to different small concentrations of toluene with and without deuterium label, which corresponded to realistic environmental mass transfer scenarios. Detected isotope fractionations depended significantly on the toluene concentration, hence confirming the influence of substrate mass transfer limitation on observed isotope fractionation, hypothesized by Thullner et al. (Environ. Sci. Technol. 2008, 42,6544-6551). Our results indicate that the bioavailability of a substrate should be considered during quantitative analysis of microbial degradation based on SIFA.

The microbial degradation of organic substrates often exhibits a fractionation of stable isotopes which leads to an enrichment of the heavier isotope in the remaining substrate. The use of this effect to quantify the amount of biodegraded substrate in contaminated aquifers requires that the isotope fractionation factor is constant in time and space. In many natural and engineered systems the bioavailable concentration at the location of the enzymes differs from the average bulk concentration of the substrate. When enzymatically driven substrate degradation is coupled to a preceding transport step controlling the bioavailability of the substrate, the observed isotope fractionation becomes a function of the bulk substrate concentration. The sensitivity of the observed isotope fractionation factor toward such substrate concentration changes depends on the ratio of bulk substrate concentration and Michaelis-Menten constant and on the ratio between the specific affinity of the microorganisms toward the substrate and the first order rate constant of the bioavailability limiting transport process. Highest sensitivities toward substrate concentration were found for combinations of high substrate concentration with low substrate bioavailability (i.e., high ratios of substrate concentration and Michaelis-Menten constant, and high ratios of specific affinity and transport rate constant). As a consequence, changes in concentration and isotopic composition of a bioavailability limited substrate in batch experiments should not exhibit a linear relation in a Rayleigh plot, and the slope of the Rayleigh plot should show a decreasing trend with concentration decrease. When using isotope fractionation to quantify biodegradation along groundwater flow paths, changes in observed isotope fractionation might occur while contaminant concentration decreases along a flow path.

Microbial communities grow more stably when they are associated to surfaces or organized in aggregates. This advantage of biofilms is technically exploited for the degradation of xenobiotics or in biocatalysis, where the fixed biomass has the added advantage of easier separation of excreted products. Whereas the biothermodynamic analysis of growth and product formation of suspended cells is developing fast, there are only few reports on the calorimetric analysis and biothermodynamic interpretation of biofilm evolution. Experiments illustrate the ability of calorimetry to monitor the physiological state of biofilms in real time. Sessile cells of Escherichia coli DH5α DSM 6897 were selected as surrogates of biofilm formers of medical, ecological and biotechnological importance. It is explained how stoichiometric information can be extracted from calorimetric measurements and future possibilities are discussed.

Bioremediation technologies and many environmentally sound biosyntheses rely on the catalytic potential of whole cells. For analyzing and controlling such processes robust real-time indicators for the concentration of intact cells such as impedance are required. The conventional method measures the capacitances of cell suspensions at one or two frequencies and correlates them with biomass concentrations. However, cell inclusions such as lipid droplets or overproduced enzymes may block intracellular ion paths, thereby possibly modifying the dielectric properties of the cells. To test the hypothesis that the total impedance spectrum into the analysis may provide useful information about cell inclusions, the impedance spectrum of a technical culture of the oleaginous yeast Arxula adeninivorans was measured and evaluated every 15s. This yeast is a good test object since it stores the excess of assimilated carbon in experimentally controllable lipid droplets. Upon correction for possible impedance signal interferences, we derived different empirical methods suitable to indicate incipient lipid formation. The methods were designed to act on-line and are thus principally suited for real-time monitoring of cell inclusions. In search for optimised bioprocess monitoring we tested a heuristic spectrum analysis using integrative statistics (RDA). With this approach we were able to accurately detect the formation of cell inclusions, which is potentially valuable for future bioprocess control strategies.

Growth of Aquincola tertiaricarbonis L108 on the fuel oxygenates methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME), as well as on their main metabolites tert-butyl alcohol (TBA), tert-amyl alcohol (TAA) and 2-hydroxyisobutyrate (2-HIBA) was systematically investigated to characterize the range and rates of oxygenate degradation by this strain. The effective maximum growth rates for MTBE, ETBE and TAME at pH 7 and 30 degrees C were 0.045 h(-1), 0.06 h(-1) and 0.055 h(-1), respectively, whereas TAA, TBA and 2-HIBA permitted growth at rates up to 0.08 h(-1), 0.1 h(-1) and 0.17 h(-1), respectively. The experimental growth yields with all these substrates were high. Yields of 0.55 g dry mass (dm) (g MTBE)(-1), 0.53 g dm (g ETBE)(-1), 0.81 g dm (g TAME)(-1), 0.48 g dm (g TBA)(-1), 0.76 g dm (g TAA)(-1) and 0.54 g dm (g 2-HIBA)(-1) were obtained. Maximum specific degradation rates were 0.92 mmol MTBE h(-1) (g dm)(-1), 1.11 mmol ETBE h(-1) g(-1), 0.66 mmol TAME h(-1) g(-1), 1.19 mmol TAA h(-1) g(-1), 2.82 mmol TBA h(-1) g(-1), and 3.27 mmol 2-HIBA h(-1) g(-1). The relatively high rates with TBA, TAA and 2-HIBA indicate that the transformations of these metabolites did not limit the metabolism of MTBE and the related ether compounds. Despite the fact that these metabolites still carry a tertiary carbon atom that is commonly suspected to confer recalcitrance to the ether oxygenates, the transformation rates were in the same range as those with succinate and fructose. With MTBE, strain L108 grew at pHs between 5.5 and 8.0 at near-maximal rate, whereas no growth was found below pH 5.0 and above pH 9.0. The optimum growth temperature was 30 degrees C, but at 5 degrees C still about 15 % of the maximum rate remained, whereas no growth occurred at 42 degrees C. This indicates that MTBE metabolites are valuable substrates and that A. tertiaricarbonis L108 is a good candidate for bioremediation purposes. The possible origin of its exceptional metabolic capability is discussed in terms of the evolution of enzymic activities involved in the conversion of compounds carrying tertiary butyl groups.

Analysis of 16S rRNA gene clone libraries from acidic mining lake water and sediment, and from an enclosure to which organic carbon was added to stimulate microbial alkalinization processes of sulfate and iron reduction revealed the presence of diverse sequences affiliated with the Acidobacteria subdivision 1. A novel oligonucleotide probe, ACIDO228, was designed that covered most sequences of Acidobacteria subdivision 1. The hybridization conditions were optimized using the type strain Acidobacterium capsulatum. The depth distribution and seasonal dynamics of Acidobacteria in the lake and the enclosure were assessed by whole cell hybridization. Sequence analyses and in situ quantification indicated that Acidobacteria accounted for a substantial part of bacterioplankton communities in both compartments. During the summer stratification distinct maxima of acidobacterial abundance were detected in the hypolimnion (up to 13% of total cell numbers), whereas during spring and autumn circulations no clear depth-dependent differences were visible. These data suggest that Acidobacteria thrive best in the hypolimnion, which is characterized by lower temperatures and higher availability of organic substrates. The application of probe ACIDO228 provided quantitative information on the seasonal and depth distribution of Acidobacteria in a lake environment and in particular in a rather extreme habitat, an acidic mining lake.

With a profound knowledge of how physico-chemical parameters affect these communities, microbial communities could be used as indicators for environmental changes and for risk assessment studies. We studied aquatic hyphomycete communities in rivers and aquifers from sites shaped by intense mining activities (namely the "Mansfeld region") and chemical industry (cities of Halle and Bitterfeld) in Central Germany. Environmental stress factors such as high concentrations of heavy metals, sulphate, and nitrate as well as low concentrations of oxygen significantly reduced the diversity and biomass of hyphomycetes in the investigated samples. Redundancy analysis (RDA) indicates that variations in water chemistry cause a significant proportion of the change in fungal community structure (86.2%). Fungi were negatively correlated with high metal and nutrient concentrations. RDA also showed a strong influence of organic matter on individual species, with Anguillospora longissima (Sacc. et Syd.), Clavatospora longibrachiata (Ingold), Clavariopsis aquatica (De Wild), Flagellospora curvula (Ingold), Heliscus lugdunensis (Sacc. et Thérry), Tumularia aquatica (Ingold) and Lemonniera aquatica (De Wild) being most sensitive. We propose that aquatic hyphomycete communities can be used as sensitive and integrative indicators for freshwater quality.

Using cultivation-independent methods the ciliate communities of a clay-rich soil with a 90-year record of pollution by polycyclic aromatic hydrocarbons (PAH) (4.5 g kg−1 PAH) were compared with that of a nonpolluted soil collected in its vicinity and with similar properties. A ciliate-specific set of 18S rRNA gene targeting primers was designed and used to amplify DNA extracted from both soils (surface and 20 cm depth). Four clone libraries were generated with PCR products that covered an 18S rRNA gene fragment of up to 670 bp. Comparative sequence analysis of representative clones proved that the primer set was highly specific for ciliates. Calculation of similarity indices based on operational taxonomic units after amplified ribosomal DNA restriction analysis of the clones showed that the community from the nonpolluted surface soil was highly dissimilar to the other communities. The presence of several taxa, namely sequences affiliated to the orders Phyllopharyngia , Haptoria , Nassophorea , Peniculida and Scuticociliatia in samples from nonpolluted soil, points to the existence of various trophic functional groups. In contrast, the 18S rRNA gene diversity was much lower in the clone libraries from the polluted soil. More than 90% of these sequences belonged to the class Colpodea , a well-known clade of mainly bacterivorous and r-selected species, thus potentially also indicating a lower functional diversity.

Bioassays with bioreporter bacteria are usually calibrated with analyte solutions of known concentrations that are analysed along with the samples of interest. This is done as bioreporter output (the intensity of light, fluorescence or colour) does not only depend on the target concentration, but also on the incubation time and physiological activity of the cells in the assay. Comparing the bioreporter output with standardized colour tables in the field seems rather difficult and error-prone. A new approach to control assay variations and improve application ease could be an internal calibration based on the use of multiple bioreporter cell lines with drastically different reporter protein outputs at a given analyte concentration. To test this concept, different Escherichia coli-based bioreporter strains expressing either cytochrome c peroxidase (CCP, or CCP mutants) or β-galactosidase upon induction with arsenite were constructed. The reporter strains differed either in the catalytic activity of the reporter protein (for CCP) or in the rates of reporter protein synthesis (for β-galactosidase), which, indeed, resulted in output signals with different intensities at the same arsenite concentration. Hence, it was possible to use combinations of these cell lines to define arsenite concentration ranges at which none, one or more cell lines gave qualitative (yes/no) visible signals that were relatively independent of incubation time or bioreporter activity. The discriminated concentration ranges would fit very well with the current permissive (e.g. World Health Organization) levels of arsenite in drinking water (10 µg l(-1)).

The microbial degradation of tert-butyl alcohol (TBA), an important environmental pollutant and an intermediate in the degradation of methyl tert-butyl ether (MTBE), was proposed to involve a monooxygenase for the initial oxidation of TBA, but up to now a specific enzyme with that activity has not been described except the well-known AlkB for the Gram-positive strain Mycobacterium austro-africanum IFP2012 (Lopez Ferreira et al., Appl. Microbiol. Biotechnol. 2007, 75, 909-919). In the course of our studies of the MTBE pathway, the proteome patterns in one- and two-dimensional gels of Aquincola tertiaricarbonis L108 which was grown on lactate, on hydroxyisobutyrate (2-HIBA) and TBA, were compared. A protein of about 55 kDa was detected after growth on TBA and 2-HIBA, which, after mass spectrometric analysis of the tryptic digested peptides, was assigned with a high score to phthalate dioxygenase. Sequence analysis of PCR products obtained with primers derived from the amino acid sequences in the above peptides supported the assignment to the hydroxylase subunit of phthalate dioxygenase-like proteins by covering 96.7% of a corresponding gene from Methylibium petroleiphilum PM1. The conserved amino acid motifs -R-x 12 -CxHRxxxLxxG-X 8 -CxYHR-X 6 -G- for the Rieske [2Fe-2S] binding domain and (-D/E)xxxDxxHxxxxH- for the mononuclear iron binding domain were found. A second protein of about 38 kDa was detected after growth on TBA with a lower score and attributed to a putative iron-sulfur oxidoreductase subunit. Primers derived from the peptides resulted in an amplicon, which covered 75.7 % of a corresponding gene from M. petroleiphilum PM1. Conserved motifs -RxYSL-x 20-22 -RGGS- for FMN binding and -GGIGxTPxxxM- for NAD binding were detected, which suggests that this protein is the small subunit of a two-component phthalate dioxygenase-like enzyme typically containing FMN. Dioxygenase-related enzymes are known to catalyze also monooxygenase reactions (see e.g. Zhou et al. J. Bacterial. 2002, 184, 1547-1555), which makes it likely that the two proteins induced in the presence of TBA are involved in TBA oxidation.

There has been growing interest in employing electro-bioremediation, a hybrid technology of bioremediation and electrokinetics for the treatment of contaminated soil. Knowledge however on the effect of weak electrokinetic conditions on the activity and viability of pollutant-degrading microorganisms is scarce. Here we present data about the influence of direct current (DC) on the membrane integrity, adenosine triphosphate (ATP) pools, physico-chemical cell surface properties, degradation kinetics and culturability of fluorene-degrading Sphingomonas sp. LB126. Flow cytometry was applied to quantify the uptake of propidium iodide (PI) and the membrane potential-related fluorescence intensities (MPRFI) of individual cells within a population. Adenosine tri-phosphate contents and fluorene biodegradation rates of bulk cultures were determined and expressed on a per cell basis. The cells' surface hydrophobicity and electric charge were assessed by contact angle and zeta potential measurements respectively. Relative to the control, DC-exposed cells exhibited up to 60% elevated intracellular ATP levels and yet remained unaffected on all other levels of cellular integrity and functionality tested. Our data suggest that direct current (X=1 V cm(-1); J=10.2 mA cm(-2)) as typically used for electrobioremediation measures has no negative effect on the activity of the polycyclic aromatic hydrocarbon (PAH)-degrading soil microorganism, thereby filling a serious gap of the current knowledge of the electrobioremediation methodology.

Quantitative proteomics was used to gain insights into the global adaptive response to phenol in the phenol-biodegrading strain Pseudomonas sp. M1 when an alternative carbon source (pyruvate or succinate) is present. A phylogenetic analysis indicated Pseudomonas citronellolis as the closest species to the environmental strain M1, while P. aeruginosa is the closest species with the genome sequence available. After two-dimensional gel electrophoresis (2-DE) separation, protein identification by MS/MS ion search allowed the assignment of 87 out of 136 selected protein spots, 56 of which matched P. aeruginosa proteins present in databases. Coordinate induction of six enzymes of the phenol catabolic pathway in cells grown in pyruvate and phenol was revealed by expression proteomics. When succinate was the alternative carbon source (C-source), these catabolic proteins were not expressed. The global response of Pseudomonas sp. M1 to phenol-induced stress involved, among others, proteins of the energy metabolism, stress response proteins, and transport proteins. Quantitative and/or qualitative differences were registered in M1 response to different phenol concentrations or to identical phenol concentrations when cells were grown in pyruvate or succinate medium. They were attributed to differences observed in the specific growth rate, in the expression of phenol catabolism, and in resistance to phenol of Pseudomonas sp. M1 grown under different conditions.