Search

Purpose: To report on a cohort of patients referred to a tertiary center because of neuropathic pain after dental implant placement. Materials and Methods: This retrospective study of pain after dental implant placement involved a minimum follow-up of 12 months after the initial diagnosis of neuropathic pain or persistent, uncontrolled postoperative pain at the Department of Oral and Maxillofacial Surgery, Leuven University, Leuven, Belgium, from January 2013 to June 2014. Results: Following clinical and radiologic examination, the cause of pain was established in 17 of 26 patients, while the cause was unknown in 9 of 26 patients. Regular implants were placed in the mandibles of 18 patients; in the remaining 8 patients, 6 received regular implants and 2 received a zygoma implant in the maxilla. Surgical management alone brought relief to 2 patients, surgical and pharmacologic management did so for 12 patients, and pharmacologic management alone brought relief for 10 patients. Conclusions: Early removal of an at-risk implant seems justified, preferably within 48 hours after placement. No treatment, either surgical or medical, seems to cure neuropathic pain, but amitriptyline appears to be associated with consistent improvement in symptoms. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to assess whether cone beam computed tomography (CBCT) may be used for clinically reliable alveolar bone quality assessment in comparison to its clinical alternatives, multislice computed tomography and the gold standard (micro-CT). Materials and methods: Six dentate mandibular bone samples were scanned with seven CBCT devices (ProMax 3D Max, NewTom GiANO, Cranex 3D, 3D Accuitomo 170, Carestream 9300, Scanora 3D, I-CAT Next generation), one micro-CT scanner (SkyScan 1174) and one MSCT machine (Somatom Definition Flash) using two protocols (standard and high-resolution). MSCT and CBCT images were automatically spatially aligned on the micro-CT scan of the corresponding sample. A volume of interest was manually delineated on the micro-CT image and overlaid on the other scanning devices. Alveolar bone structures were automatically extracted using the adaptive thresholding algorithm. Based on the resulting binary images, an automatic 3D morphometric quantification was performed in a CT-Analyser (Bruker, Kontich, Belgium). The reliability and measurement errors were calculated for each modality compared to the gold standard micro-CT. Results: Both MSCT and CBCT were associated with a clinically and statistically (P <0.05) significant measurement error. Bone quantity-related morphometric indices (bone volume fraction 8.41% min to 17.90% max, bone surface density -0.47 mm-1 min to 0.16 mm-1 max and trabecular thickness 0.15 mm min to 0.31 mm max) were significantly (P <0.05) overestimated, resulting in significantly (P <0.05) closer trabecular pores (total porosity percentage -8.41% min to -17.90% max and fractal dimension 0.08 min to 0.17 max) in all scanners compared to micro-CT. However, the structural pattern of the alveolar bone remained similar compared to that of the micro-CT for the Pro Max 3D Max, NewTom GiANO, Cranex 3D, 3D Accuitomo 170 and Carestream 9300. On the other hand, the Scanora 3D, i-CAT Next Generation, standard and high-resolution MSCT displayed an overrated bone quantity and aberrant structural pattern compared to other scanning devices. The calculation of morphometric indices had an overall high reliability (intraclass correlation coefficient [ICC] 0.62 min to 0.99 max), except for the i-CAT Next Generation CBCT (ICC 0.26 min to 0.86 max) and standard resolution MSCT (ICC 0.10 min to 0.62 max). Conclusions: This study demonstrated that most CBCT machines may be able to quantitatively assess alveolar bone quality, with a level of accuracy and reliability that approaches micro-CT. One may therefore propose to extrapolate this to clinical CBCT imaging, certainly when there is a need for implant rehabilitation in dentate jaw bones. [ABSTRACT FROM AUTHOR]

Purpose: To determine the accuracy of the latest cone beam computed tomography (CBCT) machines in comparison to multi-slice computer tomography (MSCT) and micro computed tomography (micro- CT) for objectively assessing trabecular and cortical bone quality prior to implant placement. Materials and methods: Eight edentulous human mandibular bone samples were scanned with seven CBCT scanners (3D Accuitomo 170, i-CAT Next Generation, ProMax 3D Max, Scanora 3D, Cranex 3D, Newtom GiANO and Carestream 9300) and one MSCT system (Somatom Definition Flash) using the clinical exposure protocol with the highest resolution. Micro-CT (SkyScan 1174) images served as a gold standard. A volume of interest (VOI) comprising trabecular and cortical bone only was delineated on the micro-CT. After spatial alignment of all scan types, micro-CT VOIs were overlaid on the CBCT and MSCT images. Segmentation was applied and morphometric parameters were calculated for each scanner. CBCT and MSCT morphometric parameters were compared with micro-CT using mixed-effect models. Intraclass correlation analysis was used to grade the accuracy of each scanner in assessing trabecular and cortical quality in comparison with the gold standard. Bone structure patterns of each scanner were compared with micro-CT in 2D and 3D to facilitate the interpretation of the morphometric analysis. Results: Morphometric analysis showed an overestimation of the cortical and trabecular bone quantity during CBCT and MSCT evaluation compared to the gold standard micro-CT. The trabecular thickness (Tb.Th) was found to be significantly (P < 0.05) different and the smallest overestimation was found for the ProMax 3D Max (180 μm), followed by the 3D Accuitomo 170 (200 μm), Carestream 9300 (220 μm), Newtom GiANO (240 μm), Cranex 3D (280 μm), Scanora 3D (300 μm), high resolution MSCT (310 μm), i-CAT Next Generation (430 μm) and standard resolution MSCT (510 μm). The underestimation of the cortical thickness (Ct.Th) in ProMax 3D Max (-10 μm), the overestimation in Newtom GiANO (10 μm) and the high resolution MSCT (10 μm) were neglible. However, a significant overestimation (P < 0.05) was found for 3D Accuitomo 170 (110 μm), Scanora 3D (140 μm), standard resolution MSCT (150 μm), Carestream 9300 (190 μm), Cranex 3D (190 μm) and i-CAT Next Generation (230 μm). Comparison of the 2D network and 3D surface distance confirmed the overestimation in bone quantity, but only demonstrated a deviant trabecular network for the i-CAT Next Generation and the standard resolution MSCT. Intraclass correlation coefficients (ICCs) showed a significant (P < 0.05) high intra-observer reliability (ICC > 0.70) in morphometric evaluation between micro-CT and commercially available CBCT scanners (3D Accuitomo 170, Newtom GiANO and ProMax 3D Max). The ICC for Tb.Th and Ct.Th were 0.72 and 0.98 (3D Accuitomo 170), 0.71 and 0.96 (Newtom GiANO), and 0.87 and 0.92 (ProMax 3D Max), respectively. Conclusions: High resolution CBCT offers a clinical alternative to MSCT to objectively determine the bone quality prior to implant placement. However, not all tested CBCT machines have sufficient resolution to accurately depict the trabecular network or cortical bone. [ABSTRACT FROM AUTHOR]

Mandibular repositioning devices (MRDs) increase the patency of the upper airway by repositioning the mandible forward, resulting in displacement of the oropharyngeal tissues preventing upper airway collapsibility. Mandibular anterior repositioning is counteracted by muscle force from the temporalis muscle. A 39-year-old man had an osteolytic lesion with fracture of the coronoid process of the mandible secondary to wearing a MRD for sleep apnea. Continuous stress generated on the coronoid process temporalis muscle resulted in osteolysis and fracture of the coronoid process on the patient's right side, resulting in swelling and limited ability to open his mouth. The patient was managed with intravenous antibiotics to control the osteomyelitis and surgical debridement, with removal of the coronoid process of the mandible. It is unclear why the fracture only occurred on the right side. Pathologic fracture of the coronoid process due to chronic stress and secondary osteomyelitis is a rare severe complication of treatment for obstructive sleep apnea syndrome with a MRD. [ABSTRACT FROM AUTHOR]

Abstract Background The rel gene of Rhizobium etli (relRet), the nodulating endosymbiont of the common bean plant, determines the cellular level of the alarmone (p)ppGpp and was previously shown to affect free-living growth and symbiosis. Here, we demonstrate its role in cellular adaptation and survival in response to various stresses. Results Growth of the R. etli relRet mutant was strongly reduced or abolished in the presence of elevated NaCl levels or at 37°C, compared to the wild type. In addition, depending on the cell density, decreased survival of exponentially growing or stationary phase relRet mutant cells was obtained after H2O2, heat or NaCl shock compared to the wild-type strain. Survival of unstressed stationary phase cultures was differentially affected depending on the growth medium used. Colony forming units (CFU) of relRet mutant cultures continuously decreased in minimal medium supplemented with succinate, whereas wild-type cultures stabilised at higher CFU levels. Microscopic examination of stationary phase cells indicated that the relRet mutant was unable to reach the typical coccoid morphology of the wild type in stationary phase cultures. Assessment of stress resistance of re-isolated bacteroids showed increased sensitivity of the relRet mutant to H2O2 and a slightly increased resistance to elevated temperature (45°C) or NaCl shock, compared to wild-type bacteroids. Conclusion The relRet gene is an important factor in regulating rhizobial physiology, during free-living growth as well as in symbiotic conditions. Additionally, differential responses to several stresses applied to bacteroids and free-living exponential or stationary phase cells point to essential physiological differences between the different states.

Purpose: The aim of the present study was to describe nerve fibres around osseointegrated implants in humans. Materials and methods: Twelve mechanically failed implants, retrieved from 10 patients were collected from three dental centres over a period of 5 years. After implant removal, decalcified semi-thin sections (0.5 µm) were stained with thionic methylene blue for light microscopic analysis. In addition, an ultrastructural analysis was performed on serial ultra-thin sections (0.06 µm) using transmission electron microscopy. Results: Both myelinated and unmyelinated nerve fibres could be identified inside the Haversian canals of the osteonal bone near the implant threads. Myelinated fibres were also located at the woven bone around the implant. However, no differentiated nerve endings could be observed around the implants. Conclusions: This study shows the presence of nerve fibres in human peri-implant bone. Previous studies in animals showed that those fibres participate in the process of bone modelling and remodelling. Yet, the role of peri-implant bone innervation in the osseoperception phenomenon cannot be ruled out since the mechanism of mechanoreception in bone is not fully understood. [ABSTRACT FROM AUTHOR]

Background/Aims: High-molecular-weight advanced glycation end-products (HMW-AGEs) are abundantly present in our Western diet. There is growing evidence reporting that HMWAGEs contribute to the development of cardiovascular dysfunction in vivo, next to the wellknown low-molecular-weight AGEs. The goal of our study is to assess the ultrastructure and function of cardiomyocytes after chronic exposure to HMW-AGEs. A better understanding of underlying mechanisms is essential to create new opportunities for further research on the specific role of HMW-AGEs in the development and progression of cardiovascular diseases. Methods: Adult male rats were randomly assigned to daily intraperitoneal injection for six weeks with either HMW-AGEs (20 mg/kg/day) or a control solution. Hemodynamic measurements were performed at sacrifice. Single cardiomyocytes from the left ventricle were obtained by enzymatic dissociation through retrograde perfusion of the aorta. Unloaded cell shortening, time to peak and time to 50% relaxation were measured during field stimulation and normalized to diastolic length. L-type Ca2+ current density (ICaL) and steady-state inactivation of ICaL were measured during whole-cell ruptured patch clamp. Myofilament functional properties were measured during whole-cell ruptured patch clamp. Myofilament functional properties were measured in membrane-permeabilized cardiomyocytes. Ultrastructural examination of cardiac tissue was performed using electron microscopy. Results: Rats injected with HMW-AGEs displayed in vivo cardiac dysfunction, characterized by significant changes in left ventricular peak rate pressure rise and decline accompanied with an increased heart mass. Single cardiomyocytes isolated from the left ventricle revealed concentric hypertrophy, indicated by the increase in cellular width. Unloaded fractional cell shortening was significantly reduced in cells derived from the HMW-AGEs group and was associated with slower kinetics. Peak L-type Ca2+ current density was significantly decreased in the HMW-AGEs group. L-type Ca2+ channel availability was significantly shifted towards more negative potentials after HMW-AGEs injection. The impact of HMW-AGEs on myofilament function was measured in membrane-permeabilized cardiomyocytes showing a reduction in passive force, maximal Ca2+ activated force and rate of force development. Ultrastructural examination of cardiac tissue demonstrated adverse structural remodeling in HMW-AGEs group characterized by a disruption of the cyto-architecture, a decreased mitochondrial density and altered mitochondrial function. Conclusion: Our data indicate that HMW-AGEs induce structural and functional cellular remodeling via a different working mechanism as the well-known LMW-AGEs. Results of our research open the door for new strategies targeting HMW-AGEs to improve cardiac outcome. [ABSTRACT FROM AUTHOR]

Assessing the possible biological effects of exposure to low doses of ionizing radiation (IR) is one of the prime challenges in radiation protection, especially in medical imaging. Today, radiobiological data on cone beam CT (CBCT) related biological effects are scarce. In children and adults, the induction of DNA double strand breaks (DSBs) in buccal mucosa cells and 8-oxo-7,8-dihydro-2′-deoxyguanosine (8-oxo-dG) and antioxidant capacity in saliva samples after CBCT examination were examined. No DNA DSBs induction was observed in children nor adults. In children only, an increase in 8-oxo-dG levels was observed 30 minutes after CBCT. At the same time an increase in antioxidant capacity was observed in children, whereas a decrease was observed in adults. Our data indicate that children and adults react differently to IR doses associated with CBCT. Fully understanding these differences could lead to an optimal use of CBCT in different age categories as well as improved radiation protection guidelines. [ABSTRACT FROM AUTHOR]