Search

Ice cream is a product of high sensory acceptance because of the countless flavor options and their combination. It has become one of the most popular desserts and its production is increasing year by year and highly accepted by children, adolescents, adults, as well as the elderly public. A number of studies have been carried out in developing new functional ice creams with ingredients such as fruits like avocado, dragon fruit, banana, passion, guava, lemon and soursop. The present study was, therefore, carried out to assess the possibility of producing homemade ice cream with enhanced nutritional value with mustard green leaves. This research explored the utilization of powdered and fresh mustard green leaves in the form of puree as nutritional enrichment for homemade ice cream. Homemade ice cream ingredients in this experiment consisted of 100 g solids and 150 ml water. The solids consisted of 74 g full cream milk powder, 15 g sugar, 10 g skimmed milk powder, 0.5 g emulsifier, and 0,5 g Carboxy Methyl Cellulose. Mustard green powder was added in accordance to treatments, namely 3%, 6%, 9% and 12% from the 100 g solids. Whereas mustard green puree were added as replacement of 100 ml water from the total of 150 ml water in the formula. Control treatment was made with no mustard green powder or puree. The chemical and physical characteristics were determined in three replicates using randomized completely blocked design. Data was submitted to Analysis of Variance (ANOVA) and further tested using Honestly Significant Difference (HSD). Based on the results of this study, the addition of mustard green powder and puree on homemade ice cream had significant increase in ash content, total chlorophyll, melting rate, viscosity, and yellowness, but a decrease in overrun, lightness, and redness. The higher the concentration of mustard green powder or puree, the higher the increase of ash content, total chlorophyll, melting rate, viscosity and yellowness. On the other hand, the higher the concentration of mustard green powder or puree the higher the decrease of overrun, lightness, and redness. Mustard green powder gave higher ash content and total chlorophyll than the puree, but mustard green puree gave brighter colour indicated by higher lightness, greenness, and yellowness. [ABSTRACT FROM AUTHOR]

Featured Application: The evaluation of the potential use of arrowroot as a substitute for standard stabilizer in the development of novel ice cream, which may have industrial applications. The aim of the study was to evaluate the possibility of utilizing ultrasonic pasteurization as an alternative method to the standard pasteurization technique used for ice cream mixes. In addition, the possibility of replacing commercial stabilizers (guar gum (GG) and carboxymethylcellulose (CMC)) with arrowroot was assessed. The evaluation of the ice cream involved an analysis of its chemical composition and physical properties, including X-ray diffraction and microstructure analysis. The ice cream containing arrowroot and undergoing ultrasonic pasteurization exhibited significantly higher content of total solids (47.17%), protein (16.26 [g·(100 g)−1]), and free reducing sugars while displaying a notably lower fat content (6.60 [g·(100·g)−1]). The combination of arrowroot and ultrasonic pasteurization exerted a positive effect on reducing the apparent viscosity of the ice cream mixture (166.10 mPa·s). Consequently, it led to decreased hardness (19.97 N), increased overrun (87.02%), and extended melting time (37.48 min) in comparison to ice creams incorporating GG and CMC with traditional pasteurization. The study showed that arrowroot is a promising alternative to standard commercial stabilizers (CMC and GG) in ice cream production, while ultrasound pasteurization has the potential to replace traditional pasteurization methods. [ABSTRACT FROM AUTHOR]

This study highlights the use of red palm oil (RPO) as an alternative to dairy fat in a hard ice cream sample in the presence of different stabilizers; maltodextrin (MALTOD) and modified starch (MSTARCH). No stabilizer was added in the control sample (CO), while the different ratios of RPO to each stabilizer were 4:1, 3:2, and 2:3, coded as MALTOD1, MALTOD2, MALTOD3 for maltodextrin, and MSTARCH1, MSTARCH2, and MSTARCH3 for modified starch, respectively. These samples were compared regarding overrun, physical, and sensory properties. For MALTOD, sample MALTOD3 had the highest overrun (49.31±13.78%), while MALTOD2 had the highest viscosity (7.90±0.03 Pa.s) and hardness (1.09±0.07 kg), and MALTOD1 had the lowest melting properties (61.10±0.20%). For MSTARCH, sample MSTARCH1 had the highest hardness (3.39±0.07 kg), MSTARCH2 had the highest overrun (67.64±2.27%), and MSTARCH3 had the highest viscosity (8.19±0.24 Pa.s) and the lowest melting properties (39.83±0.20%). Samples MALTOD3 and MSTARCH1 were selected for comparison with commercial samples in terms of sensory acceptance and preference. There was no significant difference (p > 0.05) between the sensory acceptability of MALTOD3 and MSTARCH1. However, both samples received a significantly lower (p < 0.05) ranking than the commercial samples in terms of appearance, texture, flavour, meltability, and overall acceptance. Future studies are recommended to improve the RPO-based ice cream sample, particularly in terms of its sensory properties. [ABSTRACT FROM AUTHOR]

The dairy industry is actively seeking new applications for various types of whey. One promising direction is the development of nutritious ice cream, using a blend of different whey proteins. However, the production of whey ice cream is hindered by the occurrence of quality issues, primarily stemming from a low content of solids, particularly fat and protein. The development of natural components with distinctive technological attributes, such as the ability to bind excess moisture, enhance foaming properties, and replicate the taste of milk fat, is of significant relevance in food science. In this work, we investigated the influence of plant-based structuring ingredients on the viscoelastic characteristics of whey-based ice creams. Notably, mixes such as 0.4% Vianoks C45 + 0.75% oat β-glucan, 0.4% Vianoks C45 + 0.5% yeast β-glucan, and 0.4% Vianoks C45 + 3% whey protein complex + 10% vegetable purée from table beet have been proven to be effective stabilizing compositions. However, attempts to combine the whey protein complex with other types of vegetable purées like zucchini and broccoli did not yield satisfactory results. It has also been found that β-glucan from the yeast Saccharomyces cerevisiae and κ-carrageenan, a component of the Vianoks C45 stabilization system, forms a robust gel within the system. Analysis of the aqueous phase in whey-based ice creams revealed a consistent correlation between water activity, surface tension, and rheological behavior. Finally, the ice creams that exhibited the best viscoelastic characteristics also had the best sensory attributes.

This study aimed at developing a fast and low-cost detection method to discriminate between ice cream samples containing pork or non-pork gelatin by using Fourier Transform Near Infrared (FT-NIR) spectroscopy and Partial Least Squares Discriminant Analysis (PLS-DA). Forty two samples of ice cream were used, among which twenty three samples were adulterated with different levels i.e. 1%, 5%, 10%, and 20 % of pork gelatin (Non-Halal). Whereas, the remaining nineteen samples containing only cow gelatin (Halal) were used as a control. All the ice cream samples were measured with the FT-NIR spectrophotometer in the reflection mode. Spectra were collected in the wavenumber range from 10000 to 4000 cm−1 (1000 to 2500 nm). The results show that the PLS-DA model with Unit Vector Normalization (UVN) spectral transformations for 1% pork gelatin adulteration is the optimal one which was based on a compromise between the lowest value of root mean square error of cross validation (RMSECV) for the calibration set. The lowest value of root mean square error of prediction (RMSEP) for the test set, the least number of factors and the percentage of correctly classified samples, the Halal and Non-Halal, for both calibration and test sets. This newly developed method is fast, involves simple sample preparation and is low cost.

Several microbial taxa have been associated with food processing facilities, and they might resist by attaching on tools and equipment even after sanitation procedures, producing biofilms that adhere to the surfaces and might embed other microorganisms, including spoilers and pathogens. There is increasing evidence that these communities can be transferred to the final product. To explore the microbial contamination routes in a facility producing ice creams, we collected foods and environmental swabs from industrial surfaces of equipment and tools and performed taxonomic and functional analyses of the microbial DNA extracted from the environmental samples. Our results suggest that complex communities dominated by psychrotrophic bacteria (e.g., Pseudomonas and Acinetobacter spp.) inhabit the food processing environment, and we demonstrate that these communities might be transferred from the surfaces to the products. Functional analysis performed on environmental samples highlighted the presence of several genes linked to antimicrobial resistance and adherence on abiotic surfaces; such genes were more abundant on food contact (FC) than on other surfaces. Metagenome-assembled genomes (MAGs) of Pseudomonas stutzeri showed genes linked with biofilm formation and motility, which are surely linked to colonizing capabilities in the processing lines. The study highlights clear potential advantages of applying microbiome mapping in the food industry for source tracking of microbial contamination and for planning appropriate ad hoc sanitization strategies. IMPORTANCE Several microbial species might permanently establish in food processing facilities, thus contributing to food loss. In fact, food contact surfaces might transfer microorganisms to intermediates and products, potentially representing a hazard to human health. In this work, we provide evidence of the existence of complex microbial communities overcoming sanitation in an ice cream-producing facility. These communities harbored several genes that could potentially lead to attachment to surfaces and antimicrobial resistance. Also, prediction of routes of contamination showed that several potential spoilage taxa might end up in the final product. Importantly, in this work, we show that mapping the environmental microbiome is a high-resolution technique that might help food business operators ensure food quality and safety through detection of potentially hazardous microorganisms. [ABSTRACT FROM AUTHOR]

The health effects of probiotics depend on the concentration of living cells of these beneficial bacteria (more than 106 to 107 log CFU/g) in the foodstuffs at the time of consumption, as well as after the passage of the digestive system. Therefore, applying various protective compounds has been studied to protect probiotic microorganisms using the encapsulation method. Optimal formulation (Whey protein isolate (WPI): 57.22%, bio-cellulose (BC): 25%, inulin: 17.78%) was obtained based on particle size, zeta potential, microcapsule resistance to acidic conditions, and encapsulation efficiency analyses. In the second stage, probiotic ice cream samples with encapsulated and free probiotic and control sample (ice cream without probiotic) were produced. During storage for 50 days, the physical, chemical, sensory, and microbial characteristics of ice cream were investigated. The results indicated that the free probiotic decreased 0.97 logs from day 1 to day 50, while the encapsulated probiotic bacteria decreased 0.61 logs. Encapsulation significantly preserved the probiotic in the food substrate during storage. The present study indicated that the living cells of free probiotic were decreased (2 log CFU/g), although that of microencapsulated probiotic merely decreased by less than 1 log CFU/g cycle. This shows the cryoprotectant potential of BC used as a microencapsulating agent against damage at freezing temperature. [ABSTRACT FROM AUTHOR]

Copyright of Jurnal Agroindustri Halal is the property of Universitas Djuanda and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To determine the potential bioavailability of macroelements (Ca, Mg, P, K), probiotic ice cream samples (Lactaseibacillus paracasei L-26, Lactobacillus casei 431, Lactobacillus acidophilus LA-5, Lactaseibacillus rhamnosus and Bifidobacterium animalis ssp. lactis BB-12) from sheep's milk with inulin, apple fiber and inulin, or apple fiber and control samples were submitted to in vitro digestion in the mouth, stomach and small intestine. The bioavailability of calcium in the ice cream samples ranged from 40.63% to 54.40%, whereas that of magnesium was 55.64% to 44.42%. The highest bioavailability of calcium and magnesium was shown for the control samples. However, adding 4% inulin reduced the bioavailability of calcium by about 3–5% and magnesium only by about 5–6%. Adding 4% apple fiber reduced the bioavailability of calcium by as much as 6–12% and magnesium by 7–8%. The highest bioavailability of calcium was determined in ice cream with L. paracasei, and the highest bioavailability of magnesium was determined in ice cream with L. casei. The bioavailability of phosphorus in ice cream ranged from 47.82% to 50.94%. The highest bioavailability of phosphorus (>50%) was in sheep ice cream fermented by B. animalis. In the control ice cream, the bioavailability of potassium was about 60%. In ice cream with inulin, the bioavailability of potassium was lower by 3–4%, and in ice cream with apple fiber, the bioavailability of potassium was lower by up to 6–9%. The bioavailability of potassium was significantly influenced only by the addition of dietary fiber. The results of the study confirmed the beneficial effect of bacteria on the bioavailability of Ca, Mg and P. [ABSTRACT FROM AUTHOR]

The most important ingredient in ice cream production is milk. However, keeping the body, structure, and texture of ice cream requires maintaining the right balance of various constituent ingredients. Recently, a number of plant-based milk alternatives have emerged with reduced particle size distribution. Although Bambara groundnut milk (BGNM) beverage appears increasingly applicable in yoghurt production, there is paucity of relevant literature reporting its application in ice cream production. In order to supplement the existing information, this work investigated the quality indices of ice cream from dairy milk partially substituted with Bambara groundnut beverage. Different proportions of dairy milk and BGNM blended to produce ice cream involved seven formulations (100:0, 0:100, 90:10, 80:20, 70:30, 60:40 and 50:50, all v/v %). Quality indices measured included the antinutrients (phytic acid and tannins), physicochemical, microbial and sensory aspects. The obtained results showed that fat and ash content decreased with increased substitution of dairy milk, whereas the protein, carbohydrate, calcium, iron, potassium and magnesium contents increased with addition of Bambara groundnut. In addition to statistical differences that occurred across the samples (p<0.05) in most cases, with varying ranges from pH (5.20-6.61), overrun (11.00-73.50 %), total solids (10.98-12.35 %), viscosity (1.00-2.25 Pa.s), to total titratable acidity (0.05-0.11 g/100 mL). Besides the increased meltdown values, and the somewhat varying anti-nutrients (tannin = 0.32-2.64 mg/100 g; phytic acid = 2.97-63.85 mg/100 g), the total viable count ranged from 1.2 x 10³ to 8.7 x 10² CFU/mL, while sensory characteristics had quite a number of resemblances (p>0.05) between some samples. This current work has demonstrated a desirable ice cream can be produced by partially substituting dairy milk with up to 30 % Bambara groundnut extract. [ABSTRACT FROM AUTHOR]

Ice cream is a complex product containing four different phases that affect its microstructure. Viscosity is a critical ice cream quality parameter that is typically measured using off-line methodologies, such as rheometry. In-line viscosity measurements allow continuous and instant analysis compared to off-line methodologies, yet they still constitute a challenge. This work focused on the preliminary study of the potential application of near-infrared (NIR) and Raman spectroscopy as analytical tools to assess the viscosity of ice cream mixes. Historically, partial least squares regression (PLSR) is a standard algorithm used for analysis of spectral data and in the development of predictive models. This methodology was implemented over a range of viscosity values, obtained by varying the ice cream fat content and homogenization conditions. Individual PLSR models showed some predictive ability and better performance compared to the integrated model obtained by data fusion. Lower prediction errors and higher coefficients of determination were obtained for NIR, making this technique more suitable based on model performance. However, other considerations should be accounted during the selection of the best method, such as implementation limitations. This study offers a preliminary comparison of the spectroscopic methods for quantitative analysis of viscosity of aged ice cream mixes and a starting point for an in-situ application study. Graphical Abstract This is a visual representation of the abstract. [ABSTRACT FROM AUTHOR]

The present study was conducted to investigate the effect of storage on quality attributes of microencapsulated black carrot anthocyanins‐enriched ice cream. Purposely, black carrot anthocyanins were obtained using ethanolic extraction. Later on, extracts were acidified and microencapsulated with gum arabic and maltodextrin (1:1). Results showed that anthocyanin contents for T3 (9% microencapsulated anthocyanins powder‐enriched ice cream) had highest anthocyanin contents in the range of 143.21 ± 1.14 mg/100 g. However, during the storage, it was revealed that there was a slight decline in constituents concentration reasoned to oxygen exposure and interaction with other food ingredients. Similarly, for total phenolic content, the highest amount was found in T3 as 545.38 ± 4.34 mg GAE/100 g. The quality attributes of prepared ice cream treatments were also found acceptable till the end of the study (60 days). Conclusively, the addition of microencapsulated anthocyanins powder in ice cream proved to stabilize black carrot anthocyanins and contributed positively to the sensory characteristics of ice cream. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Graduate School of Natural & Applied Sciences of Mehmet Akif Ersoy University / Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi is the property of Burdur Mehmet Akif Ersoy University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Iraq Journal of Market Research & Consumer Protection / Al-Mağallaẗ al-ʿIrāqiyyaẗ li-Buḥūṯ al-Sūq wa-Ḥimāyaẗ al-Mustahlik is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study investigated the possible usage of beeswax oleogels instead of milk fat as a fat source in ice cream production and konjac gum as a stabilizer instead of salep. For this aim, 12 different ice cream samples were prepared using various fat and oil sources (milk fat and oleogel), stabilizers (salep and konjac gum), and emulsifiers (monoglyceride (MG), Palsgaard (PG), and no emulsifier/emulsifier-free (NE)). It was determined that the overrun ratio of ice cream samples containing milk fat was higher than that of samples containing oleogel, and the viscosity of the ice cream mix containing Palsgaard and oleogel was greater than that of the mix with other treatments (milk fat, MG, and NE). While the first dripping time of the samples with PG and konjac gum was longer compared to the samples without emulsifier (NE) or monoglyceride (MG), the complete melting times of the samples were close to each other. Whereas the dissolution rate of the samples with salep was higher than that of the samples with konjac gum, the fat destabilization ratios of the samples with oleogel and konjac gum were lower than those of the samples with milk fat and salep. The fat destabilization ratio of samples containing PG as an emulsifier was statistically higher (p < 0.01) than that of samples containing MG and NE. It was found that the unsaturated fatty acid (C18:1, C18:2, and C18:3) content of the samples containing oleogel was significantly higher (p < 0.01) than that of the samples containing milk fat. However, butyric and caproic acids, which are aliphatic fatty acids, were found to be deficient in the samples to which oleogel was added instead of milk fat. As to the microscopic appearance, while water and oil particles were not homogeneously dispersed in the ice cream samples with oleogel, they were fully homogeneously dispersed in the milk fat-added ice cream samples. In addition, it was determined that panelists preferred the samples with added milk fat as fat source, salep, and PG as emulsifier. Among the samples with added oleogel as the oil source, they liked the sample added with oleogel as fat source, konjac gum, and no emulgator more. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Cereals, Oils & Foods is the property of Science & Technology of Cereals, Oils & Foods Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The aim of this work is to examine the quality features of functional camel ice cream (8% fat) prepared by replacing the cream with a solid milk fat fraction (SMF), a liquid milk fat fraction (LMF) and LMF:SMF (2:1 v/v) in the ice cream mixtures. All samples were assessed for their physiochemical and rheological characteristics and the sensory quality of the ice cream mixtures and resulting ice cream. The results clarified that the type of milk fat fraction affected the viscosity of the ice cream mixtures. Also, the whipping ability decreased gradually with increasing slip melting point of the fraction used. The use of SMF in the ice cream mix decreased the adsorption of protein and fat destabilization, characterized by the slowest melting compared to ice cream with other milk fat sources. The highest and lowest hardness values were found in ice cream mixtures made with SMF and LMF, respectively. In conclusion, ice cream was successfully made by replacing the milk cream fat fractions. Cream substitution with SMF followed by LMF:SMF (2:1 v/v) is recommended in arid and semi-arid regions and improved the whipping ability, overrun, and flavor scores, which were lower when using SMF. [ABSTRACT FROM AUTHOR]

This study presents the impact of an ultrasonic treatment (UT) as an alternative to traditional, standard pasteurization (PT) on selected properties of ice cream. Additionally, an oleogel from strawberry seed oil was included in the ice cream recipe as a fat component in the shares of 5%, 6%, and 7%. To evaluate the ultrasound's effect on the ice cream's properties, an analysis of the ice cream's chemical composition was conducted, including the total content of polyphenols and macro- and microelements, as well as of its physical properties. Fourier transform infrared (FTIR) spectroscopy was used for a more precise molecular-level analysis of the changes. The ice cream containing the oleogel from strawberry seed oil and subjected to ultrasonic treatment was characterized by a significantly higher dry matter (37.43%) and carbohydrate (56.82 g·(100 g)−1) contents and a significantly lower fat content (9.93 g·(100 g)−1) compared to the ice cream subjected to traditional pasteurization. In addition, the values of freezing point temperature and the amount of frozen water for these ice cream samples were significantly higher. Therefore, this study shows that ultrasonic treatment can be a beneficial alternative to traditional pasteurization in ice cream production. [ABSTRACT FROM AUTHOR]

The present study was conducted to process and evaluate the chemical composition of ice cream made from camel milk, flavored with vanilla, baobab and papaya fruits. Camel milk, baobab and papaya were examined for chemical composition before the processing. Ice cream samples were made using one level of vanilla (3%) as control and two levels of each baobab and papaya (3% and 5%). Then ice cream samples were packed into plastic cups and stored in a freezer at -18 oC for 8 weeks. The chemical composition was examined every two weeks. The data showed significantly (P

In the last decade, increasing trends towards the consumption of healthier foods have forced processors of high-fat products (ice cream) to shift their formulations to higher proportions of unsaturated or “healthier” fats. Vegetable oils such as sunflower oil and VCO can be used as a substitute for milk fat, milk solids not fat (skim milk powder), sweeteners, stabilizers and emulsifiers, and mineral water in making ice cream. A study was carried out to determine the effects of the use of the ratio of sunflower oil: virgin coconut oil with palm fruit as a stabilizer in the production of ice cream on physicochemical properties (pH, proximate, overrun, viscosity, and melting rate). The use of palm fruit is based on the content of galactomannan in palm fruit. Premium ice cream with five different ratios of SO and VCO (15:0), (10:5), (7.5:7.5), (5:10), (15:0). The ice cream production involves mixing, pasteurization, homogenization, aging, and freezing. The physicochemical result shows ice cream sample with a ratio SO:VCO (5:10) obtained good physical properties, the lowest first-time drop/ shape retention, and a low melting rate compared to the others. The rheological behavior of ice cream is the non-Newtonian fluids with a pseudoplastic behavior. The apparent viscosity decreased with increasing shear rate.

Sweet lupine and soybean are legumes of high prospects as functional foods due to their rich protein content and low levels of fat, which sparked increased interest in incorporating these ingredients in food product development. This study aimed to investigate the effect of different levels of sweet lupine and soymilk substitution on the physicochemical and sensory properties of vanilla-flavored ice cream. Characterization of raw materials revealed that higher protein content was obtained in sweet lupine (5.86%) than in soymilk (4.83%) and cow milk (3.40%). However, the crude fat content of sweet lupine was much lower than cow milk and soymilk with values of 1.21%, 4.40% and 5.70%, respectively. Ice cream formulated from sweet lupine exhibited protein content ranging from 4.27 to 4.79% while maximum protein content of 4.39% was obtained for soymilk ice cream. The crude fat content of soymilk ice cream was higher than the sweet lupine ice cream with values of 7.47% and 6.6%, respectively. Formulation of soymilk and sweet lupine ice cream was effective as improved overrun of 84.05% was obtained when compared to 83% of the ice cream made from cow milk. The melting resistance for soymilk:cow milk and for sweet lupine milk:cow milk ice creams at different blend ratios ranged from 83.01 to 84.50% and 83.23 to 84.40%, respectively. The melting resistance increased as the amount of soy and sweet lupine milk increased. Sensory attributes of the formulated ice cream samples were evaluated and the taste and texture were reported to be similar to the ice cream made from cow milk up to 25% replacement. However, the ice cream preference of the panelists decreased with increased addition of soy and sweet lupine. As a result, ice creams made from soymilk and sweet lupine could be utilized as a better alternative to cow milk ice creams.

The demand for protein-fortified foods is increasing, and so is the necessity of the complete utilization of milk constituents in the food industry. The research objective was to study various technological and sensory indicators of ice cream fortified with whey protein concentrate. The study featured ice cream samples with 8% of mass fraction of fat and 10% of nonfat milk solids with whey protein concentrations of 1–5 %. The dynamic viscosity was studied by rotational viscosimetry, dispersion – by microstructural methods, thermal stability – by thermostatic methods, and titratable acidity – by standard methods. Whey protein concentrate in amount of 1–5 % increased the titratable acidity by 1.05–1.90 times and the dynamic viscosity – by 1.16–2.90 times. With an extra addition of 4% whey protein concentrate, the viscosity of the mix exceeded the technologically permissible values. The consistency coefficient increased by 19.4 times, and the flow index decreased by 4.8 times. During freezing, the mix revealed the high capability to air saturation with mass fraction of melt whey protein concentrate of 1 and 2%. Thermal stability also increased: mass fraction of melt after 60 min of retention decreased by 3 times. After adding 1–3% whey protein concentrate, the dispersion of air bubbles and ice crystals improved. It was determined in accordance with the density of distribution by their sizes. The hardness of ice cream decreased 1.4–8.3 times as whey protein concentrate increased. A greater mass fraction of whey protein enhanced the creamy taste and improved the texture. Based on the main technological and sensory quality indicators, the mass fraction of whey protein concentrates should be under 3%. The results may be used in protein-fortified ice cream production.

Background: Aflatoxin M1 (AFM1) in industrial ice cream was analyzed by immunoaffinity column (IAC) clean-up followed by high-performance liquid chromatography (HPLC) with a fluorescence detector (FLD) as a highly-sensitive method to confirm and quantify AFM1 in the ice cream samples.Methods: A total of 150 industrial ice cream samples were randomly collected from supermarkets in seven Iranian cities (Tehran, Tabriz, Karaj, Urmia, Sanandaj, Qazvin, and Khoramabad).Results: AFM1 was detected in more than 80.0% of samples. The average AFM1 concentration in ice cream was 29.79 ng/L. According to the results, in 12.62% of samples, AFM1 levels exceeded the maximum European Union (EU) limits for adults (50 ng/mL). This study recommends regular monitoring of AFM1 concentration in ice cream in Iran.Conclusion: Results of this study indicate the need to develop a database to assist law enforcement agencies, traders, and policymakers in local governments to minimize or prevent health-related risks caused by AFM1.

Nowadays, the use of antimicrobial natural agents as alternative food preservatives represents an intriguing case. The purpose of this study was to investigate possible antimicrobial activity of Pistacia lentiscus and Fortunella margarita essential oils (EOs) and to evaluate their commercial potential in the food industry. The main constituents identified by GC/MS in Pistacia lentiscus EO were a-pinene (67.7%), myrcene (18.8%), and β-pinene (3.0%), whereas limonene (93.8%) and myrcene (2.7%) were the dominant compounds in Fortunella margarita EO. The antimicrobial properties were initially assayed and the minimum inhibitory, non-inhibitory, and minimum lethal concentration values against the Escherichiacoli, Listeria monocytogenes, Pseudomonas fragi, Aspergillus niger, and Saccharomyces cerevisiae were determined using a previously published model, combining absorbance measurements with the common dilution method and non-linear regression analysis to fit the data. Their efficiency was further validated in ice cream containing 0.2% (w/w) Pistacia lentiscus, 0.006% (w/w) Fortunella margarita EOs and 2% (w/w) aqueous residue of F. margarita EO deliberately inoculated with 4 logcfu/g Escherichiacoli, Listeria monocytogenes or Pseudomonas fragi, separately. Similarly, the activity of the oils was monitored in fruit juice (lemon, apple, and blackcurrant) containing 0.2% (w/w) Pistacia lentiscus, 0.006% (w/w) Fortunella margarita EOs and 2% (w/w) aqueous residue of F. margarita EO deliberately spiked with 100 spores/mL of Aspergillus niger or 4 logcfu/mL of Saccharomyces cerevisiae, separately. The results showed that microbial viable counts in the supplemented products ranged at significantly lower levels compared to the control samples during storage. Overall, the data indicated that both EOs constitute effective antimicrobial sources with many potent applications in the food industry.

Four milk‐based ice cream samples were produced by heating (65°C) the ingredients at different pressures (0.5, 1.0 bar) and times (5, 30 min). Overrun, melting behaviour, particle size, viscosity and sensory analysis were conducted for each time/temperature combination. The 5‐min vacuum application resulted in a reduction of overrun and air bubbles size, whereas ice cream viscosity increased. Opposite outcomes were found for the sample treated with vacuum for 30 min, which also showed a significant fat globule size reduction (<3.0 μm). Sensory analysis revealed that the use of vacuum improved sweetness, milky and creamy sensations regardless the treatment times. [ABSTRACT FROM AUTHOR]

The aim of this study is to add functional food feature to ice cream, which is a popular food, by enriching it with propolis. In addition, another aim of the study is to provide a widespread consumption potential through ice cream to propolis, which cannot be consumed raw and whose benefits and functional properties are unknown to most consumers. A mixture consisting of a total of 6 sample groups containing 0.0%, 0.1%, 0.2%, 0.3%, 0.4% and 0.5% propolis powder was prepared for the ice cream mix. Ice cream samples were prepared from these ice cream mixes. Different analyses were executed for propolis, ice cream mix and ice cream samples. While only antioxidant analysis was executed for propolis samples, Dry matter, pH, titration acidity analyzes were executed in ice cream mix samples. Volume increase index, texture analysis, melting rate, antioxidant activity and sensory analyzes in propolis added ice cream samples were carried out on different days during 2 months of storage. According to the findings, while the volume increase of the ice cream samples was not affected by the storage time, the difference between the propolis concentrations was found. It was observed that the first dripping times increased with storage, while the melting rate of the ice cream decreased. There was no significant change in the melting rate and first drip times depending on the propolis concentrations. The texture properties of ice cream samples have changed with the addition of propolis. The hardness and stickiness values of ice cream samples changed depending on the storage time. The addition of propolis significantly increased the antioxidant activity. Antioxidant activity was changed with the addition of propolis. The phenolic content and of ice cream did not change with storage, but FRAP value decreased slightly after 60 days of storage. Storage time had a limited effect on the physicochemical and sensory properties of ice cream. Although the addition of propolis negatively affected the physical and sensory properties of ice cream, it contributed significantly to the antioxidant activity even at the lowest concentrations. With this study, the potential of propolis-added ice cream as a functional new food for consumers of all ages has been demonstrated. In line with these results, new studies should be conducted by trying different propolis extracts and different concentrations, by revealing the functionality of propolis and adding it to new other foods. [ABSTRACT FROM AUTHOR]

The work is devoted to the study of the functional and technological properties of oat β-glucan in low-fat milky ice cream (2% fat) in comparison with the stabilization system Cremodan® SI 320. β-glucan (0.5%) has a greater effect on the cryoscopic temperature of ice cream mixes than Cremodan® SI 320 in the same amount (decrease by 0.166 °C vs. 0.078 °C), which inhibits the freezing process of free water in ice cream during technological processing in the temperature range from −5 to −10 °C. Microscopy of ice cream samples after freezing and hardening shows the ability of β-glucan to form a greater number of energy bonds due to specific interaction with milk proteins. Analysis of the microstructure of ice cream samples during 28 d of storage confirms the ability of oat β-glucan to suppress the growth of ice crystals more effectively than Cremodan® SI 320. Oat β-glucan gives ice cream a rich creamy taste, increases overrun and resistance to melting, which brings this type of frozen dessert closer to a full-fat analogue (10% fat). [ABSTRACT FROM AUTHOR]

BACKGROUND: In this study, pea (Pisum sativum L.) pod powder (PPP) was incorporated (1% and 3% w/w) into a probiotic ice cream formulation containing Enterococcus faecium M74 to investigate the potential effect of PPP on the probiotic survivability in the ice cream throughout 60 days of frozen storage. Moreover, the produced symbiotic ice creams were evaluated for their physiochemical properties, stability, and sensory acceptability. RESULTS: Incorporation of PPP into ice cream caused significantly (P < 0.05) increased protein and ash content and lower pH values. Besides that, the addition of PPP resulted in ice creams with higher hardness and lower overrun. A significant diminishing was observed in the melting rates of the ice creams as the percentage of PPP increased and storage time progressed. Ice cream with PPP presented lower lightness and higher greenness and yellowness compared with control. All ice creams had viable counts of E. faecium M74 of ≥6 log cfu g−1 during storage and provided the number of viable cells that the probiotic product should contain. On day 60, the viability of E. faecium M74 in ice cream containing 1% PPP (7.64 ± 0.02) was higher than the control (7.28 ± 0.00). Sensory analyses revealed that there was no statistical difference in ice cream with 1% PPP and the control without PPP in terms of general acceptability. CONCLUSION: These results suggest that pea pods, which is a waste product of the pea industry and obtained at zero cost, could be used as a potential prebiotic and an agent to improve technological properties of dairy products. © 2022 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

In this study, Indigofera tinctoria extract (ITLE) along with maltodextrin in different concentrations was encapsulated using a freeze dryer, and some physicochemical properties were measured. Powder containing 30% maltodextrin was selected as the optimal powder for use in ice‐cream production in four levels (0%–1.8%), and some quality parameters were examined. The results showed that with increasing the carrier concentration, moisture content, aw, solubility, a*, and b* of the powders decreased; bulk density, tapped density, and L* did not change significantly; total phenolic content and antioxidant activity of powders also increased significantly (p <.05). Addition of encapsulated ITLE to the ice cream caused a significant decrease in L*, b*, and melting rate, a significant increase in a*, overrun, and hardness of the samples and no change in the viscosity of the ice‐cream mix (p <.05). Ice cream containing 1.2% encapsulated ITLE had higher sensory acceptance than other levels following control ice cream. The results of this study showed that ITLE can be used as a desirable additive in the production as a natural antioxidant and color agent. [ABSTRACT FROM AUTHOR]

In this study, tubers of a wild orchid Orchis sancta grown in the Mediterranean region of Turkey were collected, processed into powdered salep and various characteristics (chemical composition, water holding capacity (WHC), swelling capacity, solubility at 70 °C, 80 °C, 90 °C during 15 min) of salep were determined. In the second stage, model ice cream mixes were prepared with salep at various concentrations (5 g·l-1, 10 g·l-1, 15 g·l-1, 20 g·l-1) and heat-treated at various temperatures (70 °C, 80 °C and 90 °C) during 15 min). Solubility of salep in water was found to be affected by the applied temperature, resulting in an increase at 80 °C but a decrease at 90 °C. Increasing salep concentration resulted in a reduction in titratable acidity, total protein, ash contents but an increase in WHC, apparent viscosity, thixotropic behaviour in mixture models. As the temperature increased, titratable acidity, WHC, apparent viscosity, hysteresis areas increased and the flow behaviour index diverged from Newtonian behaviour. A more uniform structure with the increase in salep concentration and temperature from 70 °C to 80 °C, but cluster formation at 90 °C, were observed by microscopy, supporting the results on solubility of salep in water. [ABSTRACT FROM AUTHOR]

Ice cream is a frozen dairy product that includes healthy and nutritious aspects. To improve the value of the health benefits, it is necessary to develop functional ice cream products. One such addition is horn plantain bananas, which have the benefit of having a high dietary fibre and pectin content. In order to make ice cream, gelatin must be used as a stabilizer. The increase of non-halal gelatin has led to improvements in the production of halal gelatin derived from fish. This study was performed to evaluate the effect of adding fish gelatin to the characteristics of plantain banana (Musa paradisiaca fa. Corniculata)-based ice cream. This study used a pre-experimental design with a fully randomized design and one component, the addition of varying quantities of fish gelatin (A1: 0 %, A2: 0.25 %, and A3: 0.5 %) with three replicates. The characteristics (taste, fragrance, texture, and colour), melting time, and overrun were evaluated. The Duncan Multiple Range Test as post-hoc test was used to continue ANOVA-based data analysis. The results demonstrated that the inclusion of fish gelatin at various levels did not significantly alter the degree of preference for colour, fragrance, flavour, or overrun. Texture and melting time were different (p <0.05). According to this study, the ice cream that the panellists preferred had an average overrun value of 52.67 ± 9.87, a melting time of 26.0 ± 0.1 minutes, and was made using the A3 formulation with 0.5 % fish gelatin. [ABSTRACT FROM AUTHOR]

Recent studies accelerated the discovery of various ice cream stabilizers. The present study aimed to analyze the impact of guar gum, sahlep (as a commercial stabilizer) and quince seed extract powder (as a novel stabilizer) on certain ice cream properties. Four ice cream samples were manufactured by adding quince seed extract powder (QSEP: 0.5% quince seed extract powder), sahlep (S: 0.5% sahlep), quince seed extract powder-sahlep combination (QSEP-S: 0.2% quince seed extract powder and 0.3% sahlep) and guar gum (G: 0.5% guar gum) to determine their effect as stabilizers. The chemical, physical, textural and sensory properties of the ice creams were determined on the 1st, 30th and 60th days of storage. First dripping time, total melting time and color values were (p < 0.05) significantly affected by different formulations and storage time. Hardness, cohesiveness, adhesiveness and gumminess of the samples were 303.9-692.4 g, 0.175–0.275 g, 2.59–4.88 mJ and 59.28-192.55 g, respectively. The highest total phenolic content (22.07 mg GAE/100 g ice cream) was determined in the ice cream with quince seed extract powder in initial storage. The microstructure of the ice creams produced with quince seed extract powder was quite different when compared to other samples. The lowest overrun (26.83%) was noted in the ice cream with guar gum. Ice cream with sahlep exhibited the highest general acceptability score, followed by QSEP-S, G and QSEP on the 1st and 60th days. Results demonstrated that quince seed extract powder could be employed as full or partial substitute for commercial stabilizers. [ABSTRACT FROM AUTHOR]