Search

A convenient and high-yield synthesis for N1-tritylethane-1,1,2,2- d4-1,2-diamine, a novel mono-protected ethylenediamine-C- d4, is reported. N1-tritylethane-1,1,2,2- d4-1,2-diamine was prepared in three steps from ethylene oxide- d4 in a combined yield in the range 68-76%. Also reported is a synthesis of ethylenediamine-C- d4 in two steps from 1,2-dibromoethane- d4 in a combined yield in the range 61-65%. [ABSTRACT FROM AUTHOR]

We present an extensive study of a novel class of de novo designed tetrahedral M4L6 (M = Ni, Zn) cage receptors, wherein internal decoration of the cage cavities with urea anion-binding groups, via functionalization of the organic components L, led to selective encapsulation of tetrahedral oxoanions EO4n- (E = S, Se, Cr, Mo, W, n = 2; E = P, n = 3) from aqueous solutions, based on shape, size, and charge recognition. External functionalization with tBu groups led to enhanced solubility of the cages in aqueous methanol solutions, thereby allowing for their thorough characterization by multinuclear (1H, 13C, 77Se) and diffusion NMR spectroscopies. Additional experimental characterization by electrospray ionization mass spectrometry, UV-vis spectroscopy, and single-crystal X-ray diffraction, as well as theoretical calculations, led to a detailed understanding of the cage structures, self-assembly, and anion encapsulation. We found that the cage self-assembly is templated by EO4n- oxoanions (n ≥ 2), and upon removal of the templating anion the tetrahedral M4L6 cages rearrange into different coordination assemblies. The exchange selectivity among EO4n- oxoanions has been investigated with 77Se NMR spectroscopy using 77SeO42- as an anionic probe, which found the following selectivity trend: PO43- >> CrO42- > SO42- > SeO42- > MoO42- > WO42-. In addition to the complementarity and flexibility of the cage receptor, a combination of factors have been found to contribute to the observed anion selectivity, including the anions' charge, size, hydration, basicity, and hydrogen-bond acceptor abilities. [ABSTRACT FROM AUTHOR]

This work emphasizes the crucial role of polar solvating molecules known as phase modifiers in solvent-extraction systems. The focus of these studies was the extraction of cesium by calix[4tarene-bis(tert-octylbenzo-crown-6) in dodecane modified with various lipophilic alcohols. Results of equilibrium modeling are consistent with aggregation of the alcohol molecules with each other and with the calixarene-cesium nitrate complexes. These modeling results are supported by electrospray mass spectrometry experiments, clearly showing the alcohol:anion adducts containing several alcohol molecules. They are also supported by crystallographic evidence showing the existence of a hexameric aggregate in the solid state for a derivative of one of the alcohol modifiers used for solvent extraction, in agreement with the species giving the best modeling results. [ABSTRACT FROM AUTHOR]

Results obtained in this work show that four calix[4]arene mono and bis(benzo-crown-6) ethers functionalized with primary amine groups feature markedly enhanced cesium stripping under acidic conditions compared with nonfunctionalized analogs. The four amine-derivatized calixarenes were surveyed in nitrobenzene diluent at 25°C, demonstrating the effect under controlled conditions, where it was seen that the amino functionalization entailed at most a mild sacrifice of cesium extraction strength or selectivity. Limited solubility of the protonated forms of the extractants appears to be a potential issue for future development, however. In the best case, calix[4]arene bis[4-(2-ethylhexyl)benzo-crown-6], possessing an aminomethyl group on the upper rim, (AMBEHB) exhibited a cesium extraction strength comparable to that of a control system containing calix[4]arene bis(tert-octylbenzo-crown-6) (BOB) under alkaline conditions, whereas stripping of the cesium from AMBEHB was 56-fold more effective than BOB. A proof-of-principle extraction, scrubbing, and stripping (ESS) cycle using AMBEHB in Isopar L modified with 0.75 M 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol (Cs-7SB) showed that a greater than three-fold more efficient stripping may be obtained with AMBEHB vs. its nonfunctionalized control BEHB. A slope analysis of systematic extraction data under caustic and acidic conditions confirmed that the extraction of cesium nitrate by AMBEHB in dodecane modified by 0.5 M Cs-7SB involves the formation of a 1:1:1 metal:ligand:nitrate organic species. [ABSTRACT FROM AUTHOR]

We report a facile approach to control the shape memory effects and thermomechanical characteristics of a lignin-based multiphase polymer. Solvent fractionation of a syringylpropane-rich technical organosolv lignin resulted in selective lignin structures having excellent thermal stability coupled with high stiffness and melt-flow resistance. The fractionated lignins were reacted with rubber in melt-phase to form partially networked elastomer enabling selective programmability of the material shape either at 70 °C, a temperature that is high enough for rubbery matrix materials, or at an extremely high temperature, 150 °C. Utilizing appropriate functionalities in fractionated lignins, tunable shape fixity with high strain and stress recovery, particularly high-stress tolerance were maintained. Detailed studies of lignin structures and chemistries were correlated to molecular rigidity, morphology, and stress relaxation, as well as shape memory effects of the materials. The fractionation of lignin enabled enrichment of specific lignin properties for efficient shape memory effects that broaden the materials' application window. Electron microscopy, melt-rheology, dynamic mechanical analysis and ultra-small angle neutron scattering were conducted to establish morphology of acrylonitrile butadiene rubber (NBR)-lignin elastomers from solvent fractionated lignins. [ABSTRACT FROM AUTHOR]

The nanoconfinement effect defined by the polyoxometalate nanocage renders the encapsulated bulky ligands rigid properties by significantly limiting and slowing down their diffusive motions. These ligands that partially cover the interfacial pore on the molybdenum oxide shells are able to block some large guest molecules from going inside the capsule cluster, which provides a convincing protocol for size‐selective encapsulation and separation. More information can be found in the Communication by P. Yin et al. on page 14131 ff. [ABSTRACT FROM AUTHOR]

Invited for the cover of this issue are Panchao Yin and collaborators at Oak Ridge National Laboratory. The image depicts a 2.9 nm molybdenum oxide molecular cluster for the size-selective encapsulation of small alkane molecules. Read the full text of the article at . [ABSTRACT FROM AUTHOR]

Solvent extraction of cesium ions from aqueous solution to hydrophobic ionic liquids without the introduction of an organophilic anion in the aqueous phase was demonstrated using calix[4]arene-bis(tert-octylbenzo-crown-6) (BOBCalixC6) as an extractant. The selectivity of this extraction process toward cesium ions and the use of a sacrificial cation exchanger (NaBPh4) to control loss of imidazolium cation to the aqueous solutions by ion exchange have been investigated. [ABSTRACT FROM AUTHOR]

A series of N-alkyl aza-18-crown-6 ethers were synthesized and characterized by NMR spectroscopy and mass spectrometry. These monoaza-substituted crown ethers in ionic liquids were investigated as recyclable extractants for separation of Sr2+ and Cs+ from aqueous solutions. The pH-sensitive complexation capability of these ligands allows for a facile stripping process to be developed so that both macrocyclic ligands and ionic liquids can be reused. The extraction efficiencies and selectivities of these monoaza-subslituted crown ethers for Na+, K+, Cs+, and Sr2+ were studied in comparison to those of dicyclohexano-18-crown-6 under the same conditions. The extraction selectivity order for dicyclohexano-18-crown-6 in the ionic liquids investigated here was K+ ≫ Sr2+ > Cs+ > Na+. The extraction selectivity order for N-alkyl aza-18-crown-6, in which the alkyl group is varied systematically from ethyl to n-dodecyl, was Sr2+ Gt; K+ > Cs+ > Na+ in 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfony1]amide and K+ > Sr2+ > Cs+ > Na+ in 1-hexyl-3-methylimidazolium bis[(trifluoromethyll)sulfonyl] amide and 1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide. The strong dependence of selectivity on the type of ionic liquid indicates an important role played by solvation in solvent extraction processes based on ionic liquids. The optimization of macrocyclic ligands and ionic liquids led to an extraction system that is highly selective toward Sr2+. [ABSTRACT FROM AUTHOR]

The article presents a study on highly textured physical catalyst, composed of nitrogen-doped carbon nanospikes, for the electrolysis of nitrogen gas to ammonia. It mentions that the catalyst promotes electro reduction of dissolved nitrogen molecules near the electrode due to a surface composed of sharp spikes, which concentrates the electric field at the tips. It mentions importance of electrolyte as the reaction rate is dependent on the counter ion type.

Investigates the ultrasensitive detection of CrO[sup 2-, sub 4] using a microcatilever sensor. Effect of SAM treatment time on the sensitivity; Cantilever deflection due to anion adsorption; Mechanics of the bending of microcantilevers.

Deuterated chitosan was produced from the filamentous fungus Rhizopus oryzae, cultivated with deuterated glucose in H 2 O medium, without the need for conventional chemical deacetylation. After extraction and purification, the chemical composition and structure were determined by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and small-angle neutron scattering (SANS). 13 C NMR experiments provided additional information about the position of the deuterons in the glucoseamine backbone. The NMR spectra indicated that the deuterium incorporation at the non-exchangeable hydrogen positions of the aminoglucopyranosyl ring in the C3 - C5 positions was at least 60-80 %. However, the C2 position was deuterated at a much lower level (6%). Also, SANS showed that the structure of deuterated chitosan was very similar compared to the non-deuterated counterpart. The most abundant radii of the protiated and deuterated chitosan fibers were 54 Å and 60 Å, respectively, but there is a broader distribution of fiber radii in the protiated chitosan sample. The highly deuterated, soluble fungal chitosan described here can be used as a model material for studying chitosan-enzyme complexes for future neutron scattering studies. Because the physical behavior of non-deuterated fungal chitosan mimicked that of shrimp shell chitosan, the methods presented here represent a new approach to producing a high quality deuterated non-animal-derived aminopolysaccharide for studying the structure-function association of biocomposite materials in drug delivery, tissue engineering and other bioactive chitosan-based composites., (Copyright © 2021. Published by Elsevier Ltd.)

Encapsulation behavior, as well as the presence of internal catalytically active sites, has been spurring the applications of a 3 nm hollow spherical metal oxide cluster {Mo132 } as an encapsulation host and a nanoreactor. Due to its well-defined and tunable cluster structures, and nanoscaled internal void space comparable to the volumes of small molecules, this cluster provides a good model to study the dynamics of materials under nanoconfinement. Neutron scattering studies suggest that bulky internal ligands inside the cluster show slower and limited dynamics compared to their counterparts in the bulk state, revealing the rigid nature of the skeleton of the internal ligands. NMR studies indicate that the rigid internal ligands that partially cover the interfacial pore on the molybdenum oxide shells are able to block some large guest molecules from going inside the capsule cluster, which provides a convincing protocol for size-selective encapsulation and separation., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

An in situ electrochemical small-angle neutron scattering (eSANS) method was developed to measure simultaneously the redox properties and size, shape and interactions of solution-dispersed nanomaterials. By combining multi-step potentials and chronocoulometry readout with SANS, the structure and redox properties of engineered nanomaterials are followed in one experiment. Specifically, ZnO nanoparticles were examined as dilute dispersions in pH buffered deuterium oxide solutions under negative electrode potentials. The ZnO disk-shaped nanoparticles undergo an irreversible size transformation upon reduction at the vitreous carbon electrode. The decrease in average nanoparticle size near a current maximum shows the reduction reaction from ZnO to Zn occurs. The eSANS method provides nanometer scale sensitivity to nanoparticle size and shape changes due to an electrochemical reaction that is crucial to understand in energy, healthcare, and other applications.

Hydrogen bonding in crystalline N,N'-dialkylthioureas was examined with the help of single-crystal X-ray diffraction, DFT calculations, and Cambridge Structural Database (CSD) analysis. A CSD survey indicated that unlike the related urea derivatives, which persistently self-assemble into one-dimensional hydrogen-bonded chains, the analogous thioureas can form two different hydrogen-bonding motifs in the solid state: chains, structurally similar with those found in ureas, and dimers, that further associate into hydrogen-bonded layers. The formation of one motif or another can be manipulated by the bulkiness of the organic substituents on the thiourea group, which provides a clear example of steric control over the hydrogen bonding arrangement in crystalline organic solids.

A series of N-alkyl aza-18-crown-6 ethers were synthesized and characterized by NMR spectroscopy and mass spectrometry. These monoaza-substituted crown ethers in ionic liquids were investigated as recyclable extractants for separation of Sr(2+) and Cs(+) from aqueous solutions. The pH-sensitive complexation capability of these ligands allows for a facile stripping process to be developed so that both macrocyclic ligands and ionic liquids can be reused. The extraction efficiencies and selectivities of these monoaza-substituted crown ethers for Na(+), K(+), Cs(+), and Sr(2+) were studied in comparison to those of dicyclohexano-18-crown-6 under the same conditions. The extraction selectivity order for dicyclohexano-18-crown-6 in the ionic liquids investigated here was K(+) >> Sr(2+) > Cs(+) > Na(+). The extraction selectivity order for N-alkyl aza-18-crown-6, in which the alkyl group is varied systematically from ethyl to n-dodecyl, was Sr(2+) >> K(+) > Cs(+) > Na(+) in 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and K(+) > Sr(2+) > Cs(+) > Na(+) in 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] amide and 1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide. The strong dependence of selectivity on the type of ionic liquid indicates an important role played by solvation in solvent extraction processes based on ionic liquids. The optimization of macrocyclic ligands and ionic liquids led to an extraction system that is highly selective toward Sr(2+).

The nature of the weak lipophilic acid used in synergistic combination with a model crown ether cation host was shown to have a strong effect on the strength and selectivity of sodium hydroxide separation from alkaline aqueous salt solutions. Sodium ion-pair extraction employing only cis-syn-cis-dicyclohexano-18-crown-6 (1) in nitrobenzene (NB) was correlated with the standard Gibbs energy (deltaG(p)o) of anion partitioning into NB and was notably weak and nonselective for the hydroxide ion, in accord with Hofmeister bias. The Hofmeister order can be selectively overcome for NaOH by utilization of acid-base chemistry coupled with complexation of sodium ion in the NB phase. Upon addition of a lipophilic organic acid into the solution of 1 in NB, sodium extraction was selectively enhanced due to the initiation of an exchange reaction between the aqueous sodium ion and the ionizable proton of the organic acid. A series of weak lipophilic hydroxy acids (HA) including fluorinated alcohols and phenols was tested. The resulting synergistic pseudo-hydroxide extraction correlates with the pKa of the employed HA; the most acidic cation exchangers provide the greatest synergism. The synergistic factor obtained using a fluorinated benzyl alcohol 7 was as high as 256. Ion-pair extraction of neutral sodium salts was not changed or only mildly enhanced by addition of HA into the NB solution of 1. This enhancement was explained by hydrogen bonding of HA with the anion as related to the hardness of the anion and the acidity of HA. In comparison with the synergism observed for NaOH, this enhancement was weak and unable to overcome the Hofmeister effect. Examination of extraction selectivity revealed that the combination of 1 and 7 preferentially extracted NaOH over all other sodium salts, including the normally preferred nitrate and perchlorate salts. Quantitative recovery of NaOH from the NB phase was demonstrated via hydrolysis of the organic acid upon a single contact of the loaded solvent with water.