Search

Lithium fluoride is a well known material used for dosimetry. In the last years it was proposed and tested also as imaging detector for X-ray microscopy. Optical microscopy represents the oldest and most used imaging technique for medicine and cell biology investigations; later other imaging techniques, including electron microscopy, were introduced. The recent technological developments in the soft X-ray field, concerning sources, optics and detectors, have been increased the interest of physicians and biologists for X-ray microscopy, mainly to obtain in vivo imaging of cells. An innovative imaging detector has been proposed and tested by researchers of C.R. ENEA Frascati, as handy, versatile and compact plate for soft X-ray imaging with very high spatial resolution, wide dynamic range, large field of view and easy to read by an optical microscope. Scientific and technological applications can be foreseen in several fields, as nanotechnologies, materials, photonics, life science and microscopy (including cell imaging, also in vivo). [ABSTRACT FROM AUTHOR]

Highly stable F 2 color centers are very efficiently produced in lithium fluoride (LiF) by electron beam irradiation at room temperature. We have fabricated optical microcavities in which the active medium is a low-energy electron beam irradiated LiF film, whose optical thickness is comparable with the peak wavelength (∼668 nm) of the F 2 broad photoluminescence band. By selecting the proper electron beam energy, one can control the F 2 color center depth distribution. This distribution influences the photoemission angular distribution of the microcavity, whose resonance properties are determined by the coupling of the depth profile of the defects with the pump electromagnetic field and microcavity modes. [ABSTRACT FROM AUTHOR]

An innovative route for deep-submicrometer spatial resolution hard x-ray microscopy with tabletop x-ray source is proposed. A film of lithium fluoride (LiF) was used as imaging detector in contact mode. We present here the x-ray images recorded on LiF films of a Fresnel zone plate with submicrometer gold structures and of an onion cataphyll. The images were read with an optical confocal microscope in fluorescence mode. The measured spatial resolution was about 250 nm, i.e., close to the resolution limit of the confocal microscope. The advantages and drawbacks, and the possible improvements, of this route are discussed. [ABSTRACT FROM AUTHOR]

Abstract: Among insulating materials containing point defects, lithium fluoride (LiF) is a radiation-sensitive alkali halide well known in dosimetry and as active medium in light-emitting devices and lasers. Electronic point defects can be produced in LiF crystals and films by different kinds of radiation. Some of these electronic defects, known as colour centres, are optically active, with broad absorption and emission bands in the visible spectral range. Novel thin-film imaging detectors for extreme ultraviolet and soft X-rays, based on photoluminescence from aggregated colour centres in LiF, have been proposed and are currently under development, successfully extending their operation also in the hard X-ray region, up to 10keV. Among the main peculiarities of LiF-based detectors, there are intrinsic high spatial resolution, in principle limited only by the point defect size, large field of view and wide dynamic range. These imaging detectors feature great versatility, as they can be grown in the form of thin films on different substrates by well-assessed physical deposition techniques. We present the promising results obtained using different X-ray laser–plasma sources in the field of nanotechnology, biology and in material science in view of future perspectives of research and development. [ABSTRACT FROM AUTHOR]

Abstract: We report about the light-emitting properties of colour centres in lithium fluoride thin films and crystals treated with low-penetrating extreme-ultraviolet radiation and soft X-rays. Experimental fluorescence-imaging results show that, under the same irradiation conditions, stronger photoluminescence, up to a factor eight, is released by colour centres in a film thermally grown on silicon substrate than in a crystal. By using a classical-electromagnetism model, we take into account the role of the silicon substrate in the enhancement of spontaneous emission over a broad spectral range to analyze such behaviour. [ABSTRACT FROM AUTHOR]

Abstract: Local fluorescent probes based on 50–100nm thick layers of LiF:F2 deposited onto the apex of apertured fiber probe of scanning near-field optical microscope (SNOM) have been prepared and tested. Excellent topographical images with the spatial resolution of a few nanometers and bright near-field optical images with the spatial resolution of about 100nm (aperture size) were obtained. Experimental evidences of fluorescence resonance energy transfer (FRET) between F2 color centers and a few dyes (rhodamine 700, HITCI, DDI) are presented and perspectives for the use of these probes in FRET SNOM are discussed. [Copyright &y& Elsevier]

Solid-state radiation detectors based on the visible photoluminescence of radiation-induced F 2 and F 3 + color centers in lithium fluoride crystals have been used for advanced diagnostics of 18 and 27 MeV proton beams, produced by the TOP-IMPLART linear accelerator, which is under development for protontherapy applications at ENEA C.R. Frascati, Italy. Visible fluorescence microscopy was successfully used to read the latent proton beam images stored in the lithium fluoride crystals, thanks to high emission efficiency of the F 2 and F 3 + color centers obtained by simultaneous optical excitation in the blue spectral range. High intrinsic spatial resolution and wide dynamic range of these novel LiF detectors allow obtaining two-dimensional images of both the beam transverse intensity distribution and of the Bragg curve. By using a simple defect formation model that takes into account the energy released in the material and the saturation of defect concentration, not only the two-dimensional dose map was obtained from the beam transverse intensity distribution image, but also the full Bragg curve was reconstructed, allowing the thorough characterization of proton beams produced by the accelerator. • Photoluminescence of color centers in LiF crystals used for proton beam imaging. • High-resolution imaging of the Bragg curve with a fluorescence microscope. • Estimation of the proton beam parameters from Bragg curve best-fitting. • High-resolution imaging of the transversal proton beam intensity distribution. • Dose mapping obtained from the transversal proton beam intensity imaging. [ABSTRACT FROM AUTHOR]

Abstract Lithium fluoride (LiF) crystals were irradiated with a proton beam. With nominal beam energies of 3 and 7 MeV, several irradiations were performed which delivered doses ranging from 103 to 107 Gy. The ionisation produced by the protons in the LiF samples induced the stable formation in the crystalline lattice of colour centres, two types of which, the F 2 and F 3 + ones, possess broad photoluminescence bands in the red and green, respectively, when optically pumped in the blue at wavelengths close to 450 nm. At both proton energies, measurements of the distinct F 2 and F 3 + contributions to the emission spectra showed a decrease of the F 3 + integrated photoluminescence intensity at large doses, say from ∼106−107 Gy on. We try to explain such a behaviour by assuming the formation of absorption and/or quenching centres, and compare the predictions of an ad hoc developed model with experimental data. Highlights • Photoluminescence by colour centres generated in LiF crystals by 3&7 MeV protons. • Photoluminescence of F 3 + colour centres in LiF diminishes at high doses. • Reabsorption and quenching possible causes of photoluminescence decay. • Theoretical model for photoluminescence intensity vs. dose that includes quenching. • Reabsorption of photoluminescence in LiF possibly caused by F 4 colour centres. [ABSTRACT FROM AUTHOR]