Search

Pesticides, such as endosulfan, can enter surface waters such as lakes and rivers, potentially posing an ecological risk. Rotifers are a dominant zooplankton species in many inland freshwater lakes in Australia; such lakes can also experience increased salinities. Acute toxicity tests (24 h) were conducted to determine the toxicity of a commercial formaulation of endosulfan to the freshwater rotifer Philodina sp. and to investigate the influence of increasing salinity on endosulfan toxicity. Rotifers were found to be relatively tolerant to endosulfan with an EC50 of 1.75 mg L-1 (a.i.), with results also suggesting that there are no interactive effects of salinity on endosulfan toxicity. [ABSTRACT FROM AUTHOR]

Abstract: Existing pilot, demonstration and commercial storage projects have demonstrated that CO2 geological storage is technically feasible. However, these projects do not operate at a scale that is necessary to make a significant reduction in greenhouse gas emissions into the atmosphere. The infrastructure for injecting carbon dioxide will need to be an order of magnitude larger than current CCS projects, at comparable size of existing petroleum installations. In most cases, the CO2 injection scheme will consist of multiple wells, potentially including wells for monitoring and pressure control. Despite the advanced understanding of subsurface flow processes and development of modelling tools, there are still conflicting results in the literature on the estimation of pressure build-up, the resulting number of injection wells required for large-scale CO2 geological storage and storage efficiency. For these issues, there do not appear to be any adequate analogues. As a result, studies on the regional impacts of CO2 storage and the role of hydraulic properties of the sealing unit have been limited to more or less generic numerical modelling exercises. Since there are typically large uncertainties in model parameters, such as relative permeability, conclusions drawn from generic studies will have limited applicability until they can be tested against field data. Uncertainties in predicting reservoir properties and therefore in predicting injectivity will clearly affect the design and economics of the injection system. Potential trade-offs with respect to costs for transport and reservoir stimulation need consideration. Also, strategies and contingencies will need to be incorporated in development plans to allow for unforeseen changes in injection conditions during project life. Continuously updating reservoir models when new data become available and adapting injection strategies will be essential for the success of large-scale CO2 geological storage. [Copyright &y& Elsevier]

Abstract: The experience from CO2 injection at pilot projects (Frio, Ketzin, Nagaoka, US Regional Partnerships) and existing commercial operations (Sleipner, Snøhvit, In Salah, acid-gas injection) demonstrates that CO2 geological storage in saline aquifers is technologically feasible. Monitoring and verification technologies have been tested and demonstrated to detect and track the CO2 plume in different subsurface geological environments. By the end of 2008, approximately 20Mt of CO2 had been successfully injected into saline aquifers by existing operations. Currently, the highest injection rate and total storage volume for a single storage operation are approximately 1Mt CO2/year and 25Mt, respectively. If carbon capture and storage (CCS) is to be an effective option for decreasing greenhouse gas emissions, commercial-scale storage operations will require orders of magnitude larger storage capacity than accessed by the existing sites. As a result, new demonstration projects will need to develop and test injection strategies that consider multiple injection wells and the optimisation of the usage of storage space. To accelerate large-scale CCS deployment, demonstration projects should be selected that can be readily employed for commercial use; i.e. projects that fully integrate the capture, transport and storage processes at an industrial emissions source. [Copyright &y& Elsevier]

Samples of the muscle of two species of tilapia (Oreochromis mossambicus and O. niloticus; 17-20 cm length) were obtained from at least one reservoir in each of the six river basins (Aruvi Aru, Kala Oya, Kirindi Oya, Ma Oya, Mahaweli, and Walawe Ganga catchments) in Sri Lanka. The metals Ca, Cu, Fe, K, Mg, Mn, Na, and Zn were consistently detected in the muscle tissue. Overall, there were few differences in the concentration of metals between the two species of fish, although there were also some statistically significant differences (p < 0.05) in the concentrations of some metals in fish obtained from some of the reservoirs. Aruvi Aru stands out as a river basin in which the two fish species have significantly lower concentration of metals when compared to other river basins. The concentration of the metals studied were below WHO and FSANZ guideline values for fish, suggesting that the consumption of the metals found in tilapia from these reservoirs poses little risk to human health. [ABSTRACT FROM AUTHOR]

Abstract: The Intergovernmental Panel of Climate Change Special Report on Carbon Capture and Storage in 2005 identified various knowledge gaps that need to be resolved before the large-scale implementation of CO2 geological storage is possible. The experience from CO2 injection at pilot projects (Frio, Ketzin, Nagaoka) and existing commercial operations (Sleipner, Snøhvit, In Salah, acid-gas injection) demonstrates that CO2 geological storage in saline aquifers is technologically feasible. By the end of 2007, approximately 15 Mt of CO2 had been successfully injected into saline aquifers by these operations. However, these projects are not necessarily representative of conditions encountered globally. A larger portfolio of large-scale storage operations is needed to provide data for verification and calibration of numerical models, to better constrain geomechanical as well as geochemical processes, and to optimize monitoring and verification plans for different storage settings. [Copyright &y& Elsevier]

Within the GEODISC program of the Australian Petroleum Cooperative Research Centre (APCRC), Geoscience Australia (GA) and the University of New South Wales (UNSW) have completed an analysis of the potential for the geological storage of CO2. The geological analysis assessed over 100 potential environmentally sustainable sites for CO2 injection (ESSCIs) by applying a deterministic risk assessment based on the five factors of: storage capacity, injectivity potential, site details, containment and natural resources. Utilising a risked storage capacity suggests that at a regional scale Australia has a CO2 storage potential in excess of 1600 years of current annual total net emissions. Whilst this estimate does give an idea of the enormous magnitude of the geological storage potential of CO2 in Australia, it does not account for various factors that are evident in source to sink matching. If preferences due to source to sink matching are incorporated, and an assumption is made that some economic imperative will apply to encourage geological storage of CO2, then a more realistic analysis can be derived. In such a case, Australia may have the potential to store a maximum of 25% of our total annual net emissions, or approximately 100–115 Mt CO2 per year. [Copyright &y& Elsevier]

The spatial patterns of pollutants produced by industrial parks are affected by many factors, but the interactions among polycyclic aromatic hydrocarbons (PAHs), metals, and soil microorganisms in the valley landforms of the Tibetan Plateau are poorly understood. Thus, this study systematically investigated the distribution and pollution of metals and PAHs in soil around an industrial park in the typical valley landform of the Tibetan Plateau and analyzed and clarified the interaction among metals, PAHs, and microorganisms. The results were as follows: metal and PAH concentrations were affected by wind direction, especially WN-ES and S-N winds; Cd (2.86-54.64 mg·kg -1 ) had the highest soil concentrations of the metals screened, followed by variable concentrations of Cu, Pb, and Zn; the pollution levels of metals and PAHs in the S-N wind direction were lower than those in the WN-ES wind direction; the Cd content of Avena sativa in the agricultural soil around the factory exceeded its enrichment ability and food safety standards; the closer to the center of the park, the higher the ecological risk of PAHs; and the TEQ and MEQ values of the PAHs were consistent with their concentration distributions. The results of the soil microbial diversity and co-occurrence network in the dominant wind direction showed that metal and PAH pollution weakened the robustness of soil microbial communities. Additionally, the diversity and robustness of soil microbial communities at the S wind site were higher than those at the ES wind site, which might be attributed to the lower metal content of the former than the latter, which plays a negative role in the biodegradation of PAHs. The results of this study provide insights into the site selection, pollutant supervision, and environmental remediation of industrial parks in typical landforms., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Organic UV filters (OUVFs), the active ingredient in sunscreens, are of environmental concern due to reported ecotoxicological effects in aquatic biota. Determining the environmental concentrations of these chemicals is essential for understanding their fate and potential environmental risk. Salting-out assisted liquid-liquid extraction (SALLE) coupled with liquid-chromatography tandem mass spectrometry (LC-MS/MS) was developed for simultaneous extraction, separation, and quantification of seven OUVFs (2,4-dihydroxybenzophenone, 2,2',4,4'-tetrahydroxybenzophenone, 4-methylbenzylidene camphor, butyl-methoxy-dibenzoyl methane, octocrylene, octyl methoxycinnamate, and oxybenzone). Method detection limits (MDLs) ranged from 11 to 45 ng/L and practical quantification limits (PQLs) from 33 to 135 ng/L. Method trueness, evaluated in terms of recovery, was 69-127%. Inter-day and intra-day variability was < 6% RSD. The coefficients of determination were > 0.97. The method was applied to river and seawater samples collected at 19 sites in and near Port Phillip Bay, Australia, and temporal variation in OUVF concentrations was studied at two sites. Concentrations of OUVF were detected at 10 sites; concentrations of individual OUVFs were 51-7968 ng/L, and the maximum total OUVF concentration detected at a site was 8431 ng/L. Recreational activity and water residence time at the site contributed to OUVF's environmental presence and persistence. The benefits of the SALLE-LC-MS/MS method include its simple operation, good selectivity, precision over a wide linear range, and that obtained extracts can be directly injected into the LC-MS/MS, overall making it an attractive method for the determination of these OUVFs in environmental water matrices. To our knowledge, this is the first report of the occurrence of OUVFs in Port Phillip Bay, Australia., (© 2023. The Author(s).)

This is the first study that investigated the presence, distribution, and composition of microplastics, MPs (1-5 mm) on beaches in the Yasawa Islands, Fiji. A temporal assessment over three years on six beaches was undertaken to investigate different beach traits on MP abundance. Average MP concentration was 4.5 ± 11.1 MPs·m -2 with significantly higher concentrations were found on east-facing beaches than west (p < 0.001), and higher on the storm line compared to the high tide line (p < 0.001). No difference was found between tourist and local beaches (p = 0.21). These results demonstrate the role of current-driven ocean transport of plastic pollution in this part of The South Pacific. ATR FT-IR analysis showed that across all sites 34 % of MPs were polypropylene (PP), 33 % polystyrene (PS), 25 % polyethylene (PE), and 8 % other polymer types. Further studies are needed to assess the potential impacts of MPs on Fiji's coral reefs and marine life., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Persistent organic pollutants (POPs) are pervasive and a significant threat to the environment worldwide. Yet, reports of POP levels in Antarctic seabirds based on blood are scarce, resulting in significant geographical gaps. Blood concentrations offer a snapshot of contamination within live populations, and have been used widely for Arctic and Northern Hemisphere seabird species but less so in Antarctica. This paper presents levels of legacy POPs (polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs)) and novel brominated flame retardants (NBFRs) in the blood of five Antarctic seabird species breeding within Prydz Bay, East Antarctica. Legacy PCBs and OCPs were detected in all species sampled, with Adélie penguins showing comparatively high ∑PCB levels (61.1 ± 87.6 ng/g wet weight (ww)) compared to the four species of flying seabirds except the snow petrel (22.5 ± 15.5 ng/g ww), highlighting that legacy POPs are still present within Antarctic wildlife despite decades-long bans. Both PBDEs and NBFRs were detected in trace levels for all species and hexabromobenzene (HBB) was quantified in cape petrels (0.3 ± 0.2 ng/g ww) and snow petrels (0.2 ± 0.1 ng/g ww), comparable to concentrations found in Arctic seabirds. These results fill a significant data gap within the Antarctic region for POPs studies, representing a crucial step forward assessing the fate and impact of legacy POPs contamination in the Antarctic environment., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The lack of treatment systems for pollutants in family-livestock and poultry sites results in large amounts of untreated manure and urine being directly discharged to environment. The risks from veterinary antibiotic (VA) and heavy metal (HM) exposure in the rural environment require further research. In this investigation, 221 samples (feed, manure, surface soil, soil profiles, water, and plant) were collected from 41 livestock and poultry farms (swine, chichen, and cattle). Copper (Cu), zinc (Zn), oxytetracycline (OTC), and enrofloxacin (ENR) were frequently detected in the samples. Metals and VAs in sandy loam soils were more inclined to migrate to deep layers than those in loam soils. Copper and Zn in the polluted soils mainly existed in available forms, which facilitated their migration to deep soil layers. In this study, OTC was also observed to migrate more easily to deeper soil layers than ENR due to its relatively high pKa value. Eighteen antibiotic resistance genes (ARGs) and 5 metal resistance genes (MRGs) along with one mobile genetic element (MGE) occurred in the soils at 80 cm depth. Luteimonas, Clostridium&#95;sensu&#95;stricto&#95;1, and Rhodanobacter were dominant genera detected in the soil samples from different sites, which might increase migration of ARGs or degradation of VAs. An ecological risk assessment suggested that VAs posed threats to the growth of Triticum aestivum L, Cucumis sativus L, and Brassiaca chinensis L. Remediation techniques including biochar/modified biochar, anaerobic digestion, and manure composting should be developed urgently for joint HM and VA pollution., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Terrestrial microinvertebrates in Antarctica are potentially exposed to contaminants due to the concentration of human activity on ice-free areas of the continent. As such, knowledge of the response of Antarctic microinvertebrates to contaminants is important to determine the extent of anthropogenic impacts. Antarctic Philodina sp. were extracted from soils and mosses at Casey station, East Antarctica and exposed to aqueous Cu for 96 h. The Philodina sp. was sensitive to excess Cu, with concentrations of 36 μg L -1 Cu (48 h) and 24 μg L -1 Cu (96 h) inhibiting activity by 50%. This is the first study to be published describing the ecotoxicologically derived sensitivity of a rotifer from a terrestrial population to metals, and an Antarctic rotifer to contaminants. It is also the first study to utilise bdelloid rotifer cryptobiosis (chemobiosis) as a sublethal ecotoxicological endpoint. This preliminary investigation highlights the need for further research into the responses of terrestrial Antarctic microinvertebrates to contaminants., (Crown Copyright © 2022. Published by Elsevier Ltd. All rights reserved.)

Soils containing both veterinary antibiotics (VAs) and heavy metals necessitate effective remediation approaches, and microbial and molecular levels of the results should be further examined. Here, a novel material combining waste fungus chaff-based biochar (WFCB) and Herbaspirillum huttiense (HHS1) was established to immobilize copper (Cu) and zinc (Zn) and degrade oxytetracycline (OTC) and enrofloxacin (ENR). Results showed that the combined material exhibited high immobilization of Cu (85.5%) and Zn (64.4%) and great removals of OTC (41.9%) and ENR (40.7%). Resistance genes including tet(PB), tetH, tetR, tetS, tetT, tetM, aacA/aphD, aacC, aadA9, and czcA were reduced. Abundances of potential hosts of antibiotic resistance genes (ARGs) including phylum Proteobacteria and genera Brevundimonas and Rhodanobacter were altered. Total phosphorus and pH were the factors driving the VA degrading microorganisms and potential hosts of ARGs. The combination of WFCB and HHS1 can serve as an important bioresource for immobilizing heavy metals and removing VAs in the contaminated soil., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In recent decades, the potential toxicological and environmental effects of organic ultraviolet filters (OUVF) have received growing attention. The number of studies in this area has increased; however, presently there is no scientometric perspective addressing this topic. The purpose of this study is to identify the intellectual base and research front using the visualization and analysis software, CiteSpace. We retrieved 453 articles, published in print or online as an early-access article between 2002 and 2020, from the Web of Science with a topic search related to OUVFs, environment, and toxicology. We then analysed synthesized networks of co-authorship (author, institution, country), co-citation (author, document, journal) and co-occurring keywords. The annual publication output has trended upwards since 2002. Authors based in China accounted for 29.4% of the total publications, followed by USA (17.4%); but overall publications from Switzerland and Spain were more influential. Major research themes identified included OUVF concentrations in aquatic environments, and hormonal effects. Emerging themes included improving the sensitivity of analytical detection methods for both OUVFs and their metabolites, consequences of OUVF transport to the marine environment, and concerns over prenatal exposure. Based on keyword analysis, benzophenone-3, 4-methylbenzylidene-camphor, 3-benzylidene camphor, and ethylhexyl-methoxycinnamate are the most studied OUVFs, and effects on estrogenic activity, gene expression, reproduction, and more recently, oxidative stress, have received most attention from a toxicological perspective. Other prominent topics were sources of environmental contamination and ecological risk assessments. This study maps the major research domains of OUVF environmental toxicology research; explanations and implications of the findings are discussed; and emerging trends highlighted., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Organic ultraviolet filters (OUVFs) are used in a wide range of manufactured products including personal care (e.g. sunscreens) and plastic items. This review summarizes the available data regarding the toxic effects of OUVFs on marine and freshwater organisms and generates the predicted no-effect concentration (PNEC) values necessary for assessing ecological risk. Through a systematic search of the literature, 89 studies were identified and ecotoxicological data extracted. Collectively, these studies described toxicity testing with 39 OUVF from 10 structural classes, with derivatives of benzophenones (49%) and camphors (16%) most studied. There was a bias towards selecting freshwater species (61%), and evaluating single OUVF effects (87%) rather than OUVF mixtures. Short-term (acute) experimentation (58%) was marginally more common than long-term (chronic) testing (42%). Reproductive, developmental, genetic, and neurological toxicity were the most commonly identified effects in aquatic organism, and were associated with molecular interactions with steroid receptors, DNA, or the production of reactive oxygen species. Species sensitivity distribution and/or assessment factors were used to calculate PNECs for 22 OUVFs and the risk quotients for 12 OUVFs. When using maximum concentrations, high risk was observed for six OUVFs in marine environments (4-methylbenzylidene-camphor, octocrylene, padimate-O, benzophenone-1, and oxybenzone, ethylhexyl-4-methoxycinnamate), and for four OUVFs in freshwater environments (ethylhexyl-4-methoxycinnamate, octocrylene, avobenzone and oxybenzone). When using median concentrations, a risk to marine environments was observed for oxybenzone. The results of this review underline that there is limited knowledge of the pathological effects of OUVFs and their metabolites in aquatic environments, and this inhibits the development of informed water-quality guidelines., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

While globally distributed throughout the world's ecosystems, there is little baseline information on persistent organic pollutants (POPs) in marine environments in Australia and, more broadly, the Southern Hemisphere. To fill this knowledge gap, we collected baseline information on POPs in migratory short-tailed shearwaters (Ardenna tenuirostris) from Fisher Island, Tasmania, and resident little penguins (Eudyptula minor) from Phillip Island, Victoria. Levels of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and brominated flame retardants (BFRs) were determined from blood samples, with total contamination ranging 7.6-47.7 ng/g ww for short-tailed shearwaters and 0.12-46.9 ng/g ww for little penguins. In both species contamination followed the same pattern where PCBs>OCPs>BFRs. BFR levels included the presence of the novel flame retardant hexabromobenzene (HBB). These novel results of POPs in seabirds in southeast Australia provide important information on the local (penguins) and global (shearwaters) distribution of POPs in the marine environment., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

While persistent organic pollutant (POP) contamination within Antarctica is largely caused by long-range atmospheric transport (LRAT), Antarctic research bases have been shown to be local sources of POPs such as brominated flame retardants (BFRs). This study compared concentrations of seven polybrominated diphenyl ethers (PBDE) congeners and five novel flame retardants (NBFRs) found in Adélie penguin (Pygoscelis adeliae) colony soils near the Australian research stations, Mawson and Davis, to assess the stations as local sources of these contaminants and provide a much needed baseline for contamination of BFRs in East Antarctica. Soil samples (n = 46) were collected from Adélie colonies at close proximity to the research stations as well as further afield during the 2016-17 austral summer. Samples were analysed using selective pressurised liquid extraction (S-PLE) and gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). PBDEs (BDE-28, -47, -99, -100, -153, -154 and -183) were detected in 45/46 samples with ∑ 7 PBDE concentrations ranging from <0.01 to 1.63 ng/g dry weight (dw) and NBFRs (2,3,4,5,6-pentabromotoluene (PBT), 2,3,4,5,6-pentabromoethylbenzene (PBEB), hexabromobenzene (HBB), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (EH-TBB) and bis(2,4,6-tribromophenoxy) ethane (BTBPE)) detected in 20/46 samples, with a range of ∑ 5 NBFR from not detected (ND) to 0.16 ng/g dw. Soils taken from around the Davis and Mawson research stations were more highly contaminated (n = 10) than penguin colonies (n = 27) and control areas not affiliated with breeding seabirds (n = 8). The most common congener detected was BDE-99, reflecting inputs from LRAT. However, the congener profiles of station soils supported the hypothesis that research stations are a local source of PBDEs to the Antarctic environment. In addition, the NBFR pentabromoethylbenzene (PBEB) was quantified for the first time in Antarctic soils, providing essential information for baseline contamination within the region and highlighting the need for ongoing monitoring as global regulations for the use of BFRs continuously change., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Glyphosate is the most widely-used pesticide for weed control in agriculture and in urban and residential areas. This is the first study to quantify glyphosate and AMPA levels in surface water in Australia from different land uses. Glyphosate and AMPA was measured in surface water from 10 rural streams, 30 urban stormwater wetlands and 9 urban streams located in and around the city of Melbourne, Australia on five occasions between October 2017 and February 2018. Glyphosate and AMPA were present in most of the urban surface water samples. The frequency of detection of glyphosate was 77% in wetlands and 79% in urban streams, whereas it was only detected in 4% of the rural streams. Similarly, AMPA detection was 91% in wetlands and 97% in urban streams, whereas it was only present in 6% of the rural stream samples. In both urban streams and wetlands, the highest average glyphosate concentrations occurred in November (1.8 ± 2.2 μg L -1 ). Overall, wetlands and streams associated with urban land use are vulnerable to glyphosate contamination. These results highlight the importance of screening for contaminants in urban stormwater to identify the source of pollutants that may end up in aquatic ecosystems and the risks therefrom., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This reconnaissance study was undertaken in 2012 to examine the occurrence of common perfluoroalkyl substances (PFAS), including perfluoroalkyl sulphonic acids and perfluoroalkyl carboxylic acids in rivers and estuaries in Port Philip Bay, Victoria, Australia. In total, 19 PFAS were screened in grab samples of water using a combination of solid phase extraction and liquid chromatography - mass spectrometry measurement techniques. Eighteen of the PFAS screened were observed in samples. The highest level of PFOS observed at a freshwater site was 0.045 μg/L; this concentration is approximately half the draft Australian 95% species protection level for total PFOS. The highest level of PFOA in the study (0.014 μg/L) was some four orders of magnitude lower than the draft Australian trigger value for PFOA (220 μg/L). However, none of the PFAS observed at the freshwater sites had research quotient (RQ) or toxicity unit (TU) values above 1 or -3, respectively. The highest concentration of PFOS observed at an estuarine site was 0.075 μg/L; the highest level of PFOA, 0.09 μg/L). There are no Australian marine water quality trigger values for PFAS, so potential risk was assessed using the European environment quality standards (EQS) adopted in EU Directive 2013/39/EU, RQ and TU methods. In that context, none of the PFAS observed at estuary sites had concentrations higher than the EU standards, or RQ above 1 or Log 10 TU above -3. Together these assessments suggest none of the PFAS screened would have posed an acute risk to organisms in the fresh or estuary waters studied at the time of sampling on an individual or collective basis. However, the detection of these PFAS in Victorian estuaries highlights that the issue is not just an issue for more densely populated countries in the northern hemisphere, but also potentially of concern in Australia. And, in that context, more sampling campaigns in Port Philip Bay are of paramount importance to assess the potential risk pose by these compounds to aquatic ecosystems., (© 2019 Published by Elsevier Ltd.)

The reuse of water in a range of potable and non-potable applications is an important factor in the augmentation of water supply and in improving water security and productivity worldwide. A key hindrance to the reuse of water is the cost of compliance testing and process validation associated with ensuring that pathogen and chemicals in the feedwater are removed to a level that ensures no acute or chronic health and/or environmental effects. The critical control point (CCP) approach is well established and widely adopted by water utilities to provide an operational and risk management framework for the removal of pathogens in the treatment system. The application of a CCP approach to barriers in a treatment system for the removal of chemicals is presented. The application exemplar is to a small community wastewater treatment system that aims to produce potable quality water from a secondary treated wastewater effluent, however, the concepts presented are generic. The example used seven treatment barriers, five of which were designed and operated as CCP barriers for pathogens. The work demonstrates a method and risk management framework by which three of the seven barriers could also include a CCP approach for the removal of chemicals. Analogous to a CCP approach for pathogens, the potential is to reduce the use of chemical analysis as a routine determinant of performance criteria. The operational deployment of a CCP approach for chemicals was augmented with the development of a decision tree encompassing the classification of chemicals and the total removal credits across the treatment train in terms of the mechanistic removal of chemicals for each barrier. Validation of the approach is shown for an activated sludge, ozone and reverse osmosis barrier., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

We assessed the water quality of south-west Victorian rivers impacted by the dairy industry using traditional water quality assessment together with culture-dependent (colilert/enterolert) and also culture-independent (next generation sequencing) microbial methods. The aim of the study was to identify relationships/associations between dairy farming intensity and water contamination. Water samples with high total and faecal coliforms (>1000 MPN cfu/100 ml), and with high nitrogen levels (TN) were observed in zones with a high proportion of dairy farming. Members of the genus Nitrospira, Rhodobacter and Rhodoplanes were predominant in such high cattle density zones. Samples from sites in zones with lower dairy farming activities registered faecal coliform numbers within the permissible limits (<1000 MPN cfu/100 ml) and showed the presence of a wide variety of microorganisms. However, no bacterial pathogens were found in the river waters regardless of the proportion of cattle. The data suggests that using the spatially weighted proportion of land used for dairy farming is a useful way to target at-risk sub-catchments across south west Victoria; further work is required to confirm that this approach is applicable in other regions., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Glyphosate is currently the most widely used herbicide in the world, yet screening of environmental waters for this chemical is limited by the need for specialized derivatization and measurement methods that can be tedious and time-consuming. In this work, we present a novel method for the detection and quantification at trace levels of glyphosate and aminomethylphosphonic acid (AMPA) in environmental water samples. The detection and quantification of the analytes was performed by liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS). Chromatographic separation was achieved with an ion-exchange column and a pH-gradient elution of a solution of ammonium hydroxide and ammonium acetate. The limit of detection for glyphosate and AMPA was 0.25 μg L -1 and the limit of quantification was 0.5 μg L -1 with a 20-μL injection. The method was used to investigate the levels of glyphosate and AMPA in surface water samples from the Yarra River catchment area and urban constructed stormwater wetlands. The results indicate that at the time of sampling, no glyphosate or AMPA was present in the samples from the Yarra River catchment area (n = 10). However, glyphosate was detected above the limit of quantification in 33% of the wetland samples (n = 12), with concentrations ranging from 1.95 to 2.96 μg L -1 . Similarly, AMPA was quantified in 83% of the wetland samples, with concentrations ranging from 0.55 to 2.42 μg L -1 . To our knowledge, this is the first report of a pH-gradient LC-MS/MS method for glyphosate and AMPA analysis at ultratrace levels, with minimal sample processing, avoiding costly, time-consuming derivatization and preconcentration steps. Graphical abstract ᅟ.

Carbamate (CB) and organophosphorus (OP) pesticides are commonly detected in aquatic ecosystems and predominantly occur as mixtures of varying complexity. These pesticides inhibit the activity of total cholinesterase (ChE) and thus have the potential to interfere with behaviours that may be essential for the survival of aquatic species. Although the effects of individual ChE insecticides on aquatic species have been reported for decades, the neurotoxicity of mixtures is still poorly understood. This study examined the chronic toxicities of two OP insecticides (chlorpyrifos (CPF) and malathion (MAL)) and one carbamate insecticide (methomyl (METH)) in binary and ternary mixtures on the ChE activity of the yabby (C. destructor). Using the concentration addition approach to estimate mixture toxicity, the observed inhibition of ChE activity caused by all binary mixtures of CPF plus MAL, CPF plus METH and MAL plus METH was additive. In ternary mixtures, all combinations of CPF, MAL and METH were either additive or antagonistic depending on the relative ratios of these chemicals in the mixtures. The effect of mixtures of these three insecticides on C. destructor has not previously been assessed, and the data suggest that individual chemical risk assessments are likely to incorrectly estimate the effect of these insecticides on C. destructor in the aquatic environment where combinations of such chemicals occur.

The Australian Antarctic Division (AAD) operates Australia's Davis Station in the Antarctic. In 2005, Davis Station's wastewater treatment plant failed and since then untreated, macerated effluent has been discharged to the ocean. The objectives of this study were to determine whether an advanced water treatment plant (AWTP) commissioned by the AAD and featuring a multi-barrier process involving ozonation, ceramic microfiltration, biologically activated carbon filtration, reverse osmosis, ultraviolet disinfection and chlorination was capable of producing potable water and a non-toxic brine concentrate that can be discharged with minimal environmental impact. The AWTP was tested using water from a municipal wastewater treatment plant in Tasmania, Australia. We used spot water and passive sampling combined with two multi-residue chromatographic-mass spectrometric methods and a range of recombinant receptor-reporter gene bioassays to screen trace organic chemicals (TrOCs), toxicity and receptor activity in the Feed water, in the environmental discharge (reject water), and product water from the AWTP for six months during 2014-15, and then again for three months in 2016. Across the two surveys we unambiguously detected 109 different TrOCs in the feed water, 39 chemicals in the reject water, and 34 chemicals in the product water. Sample toxicity and receptor activity in the feed water samples was almost totally removed in both testing periods, confirming that the vast majority of the receptor active TrOCs were removed by the treatment process. All the NDMA entering the AWTP in the feed and/or produced in the plant (typically < 50 ng/L), was retained into the reject water with no NDMA observed in the product water. In conclusion, the AWTP was working to design, and releases of TrOCs at the concentrations observed in this study would be unlikely cause adverse effects on populations of aquatic organisms in the receiving environment or users of the potable product water., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This reconnaissance study was undertaken to examine the occurrence of common ultraviolet filters (UVF) and light stabilizers (UVLS), and preservatives in four different estuaries in Port Philip Bay, Victoria, for the first time. In total, 11 UV filters, 10 UV stabilizers, 12 preservatives and a metabolite, and one fragrance were screened in grab samples of water and sediment using a combination of solid phase extraction and gas and liquid chromatography mass spectrometry measurement techniques. In that context, 16 of the UVF and UVLS and 5 of the preservatives screened were observed in water and/or sediment samples. There are no marine water quality guideline values for any of the fragrances, preservatives and UV filters and light stabilizers in Australia's current national water quality guidelines, so potential risk was assessed using the risk quotient (RQ) and toxic unit (TU) concepts. In that context, only two chemicals (OC and EHMC) had both an RQ above 1 and a log 10 TU above - 3, suggesting that few of the screened chemicals would have posed an individual, short-term risk to organisms in the waters studied at the time of sampling. However, the detection of common UV filters, such as 4MBC, EHMC, OC and the common preservatives 2-PE, MP, and PB in these Victorian estuaries highlights that the existence of personal care products in the environment is not just an issue for more densley populated countries in the northern hemisphere, but also potentially of concern in Australia. And, in that context, more sampling campaigns in Port Philip Bay are of paramount importance to assess the potential risk posed by these compounds to aquatic ecosystems.

Arundo donax (giant reed) has great potential for bioenergy biomass production in constructed wetlands. Large scale use of A. donax in constructed wetlands will require the use of either established plants sourced from nurseries, or the use of cuttings or rhizomes and stems from mother plants derived from nurseries or wild stands. The results of this study suggest that cuttings and rhizomes are not sensitive to salinity up to an EC ~ 4500 µS cm - 1 . Plants used to establish a constructed wetland should have stems of at least 300 mm length, with well established roots. Moreover, culms will emerge from small pieces of stems with viable nodes regardless of salinity, albeit the fresher the water the less likely salinity will subsequently affect the emerging shoot. From a practical perspective, this suggests that wetlands can be planted with giant reed using horizontally laid stems. Unless using plants pre-stressed to a salinity matching that of the wastewater to be treated, giant reed should be established using reasonable quality water (EC < 1000 µS cm - 1 ) until the plants are of a reasonable size, e.g. > 500 mm in height, after which undiluted wastewater can be used.

The toxicity of two organophosphorus insecticides, chlorpyrifos (CPF), malathion (MAL), and one carbamate insecticide, methomyl (METH), to the yabby (Cherax destructor) was assessed by measuring cholinesterase (AChE, BChE), Glutathione S-Transferase (GST) and Na + /K + ATPase activity after 96h of exposure. Yabbies exposed to all three insecticides at 2 and 5µgL -1 exhibited significant AChE, BChE, GST and Na + /K + ATPase inhibition. Based on these enzyme inhibition tests, the toxicity of the three insecticides to C. destructor was CPF > MAL > METH. After 14 days of recovery the yabbies enzymatic activities of AChE, BChE, GST and Na + /K + ATPase was measured. Recovery of The enzyme activity recovery was faster after the exposure to METH than for the yabbies exposed to CPF and MAL. Slow recovery of enzyme activity could affect the physical activities of organisms and produce indirect effects on populations if such crayfish are less able to elude predators or search for food., (Copyright © 2017 Elsevier Inc. All rights reserved.)

The aims of this study were to evaluate the bioavailability of polycyclic aromatic hydrocarbons (PAHs) in industrial and agricultural soils using chemical methods and a bioassay, and to study the relationships between the methods. This was conducted by comparing the quantities of PAHs extracted from two manufactured gas plant (MGP) soils and an agricultural soil with low level contamination by solid-phase micro-extraction (SPME) and Tenax-TA extraction with the quantities taken up by the earthworm (Eisenia fetida). In addition, a biodegradation experiment was conducted on one MGP soil (MGP-A) to clarify the relationship between PAH removal by biodegradation and the variation in PAH concentrations in soil pore water. Results demonstrated that the earthworm bioassay could not be used to examine PAH bioavailability in the tested MGP soils; which was the case even in the diluted MGP-A soils after biodegradation. However, the bioassay was successfully applied to the agricultural soil. These results suggest that earthworms can only be used for bioassays in soils with low toxicity. In general, rapidly desorbing concentrations extracted by Tenax-TA could predict PAH concentrations accumulated in earthworms (R 2 =0.66), while SPME underestimated earthworm concentrations by a factor of 2.5. Both SPME and Tenax extraction can provide a useful tool to predict PAH bioavailability for earthworms, but Tenax-TA extraction was proven to be a more sensitive and precise method than SPME for the prediction of earthworm exposure in the agricultural soil., (Copyright © 2017. Published by Elsevier Inc.)

Urban stormwater samples were collected from five aquatic systems in Melbourne, Australia, on six occasions between October 2011 and March 2012 and tested for 30 herbicides and 14 trace metals. Nineteen different herbicides were observed in one or more water samples from the five sites; chemicals observed at more than 40% of sites were simazine (100%), MCPA (83%), diuron (63%) and atrazine (53%). Using the toxicity unit (TU) concept to assess potential risk to aquatic ecosystems, none of the detected herbicides were considered to pose an individual, group or collective short-term risk to fish or zooplankton in the waters studied. However, 13 herbicides had TU values suggesting they might have posed an individual risk to primary producers at the time of sampling. Water quality guideline levels were exceeded on many occasions for Cd, Cu, Cr, Pb and Zn. Similarly, RQ med and RQ max exceeded 1 for Cd, Cr, Cu, Mn, Ni, Pb, V and Zn. Almost all the metals screened exceeded a log 10 TU of -3 for every trophic level, suggesting that there may have been some impact on aquatic organisms in the studied waterbodies. Our data indicate that Melbourne's urban aquatic environments may be being impacted by approved domestic, industrial and sporting application of herbicides and that stormwater quality needs to be carefully assessed prior to reuse. Further research is required to understand the performance of different urban stormwater wetland designs in removing pesticides and trace metals. Applying the precautionary principle to herbicide regulation is important to ensure there is more research and assessment of the long-term 'performance' standard of all herbicides and throughout their 'life cycle'. Implementing such an approach will also ensure government, regulators, decision makers, researchers, policy makers and industry have the best possible information available to improve the management of chemicals, from manufacture to use.

To explore the role of exopolymeric substances (EPS) in the process of polycyclic aromatic hydrocarbons (PAH) biodegradation, the characteristics of EPS isolated from a PAH-degrading fungus were investigated firstly by spectrometric determination, microscopic observation, Fourier transform-infrared spectroscopy (FT-IR), and three-dimensional excitation-emission matrix fluorescence spectroscopy (3D-EEM), and then the PAH-degrading ability of isolated EPS was evaluated. The EPS compositions and morphology varied significantly with the extraction methods. EPS were mainly composed of proteins, carbohydrate, and humic-like substances, and the cation exchange resin (CER)-extracted EPS were granular while other EPS samples were all powders. Heating was the most effective treatment method, followed by the CER, centrifugation, and ultrasonication methods. However, 3D-EEM data demonstrated that heating treatment makes the mycelia lyse the most. Overall, therefore, the CER was the best EPS extraction method for Mucor mucedo (M. mucedo). The PAH degradation results indicated that 87 % of pyrene and 81 % of benzo[a]pyrene (B[a]P) were removed by M. mucedo over 12 days and 9 % more pyrene and 7 % more B[a]P were reduced after CER-extracted EPS addition of 465 mg l(-1). The investigation of EPS characterization and EPS enhancing PAH biodegradation is the premise for further in-depth exploration of the role of EPS contribution to PAH biodegradation.

Water and sediment samples were collected from up to 17 sites in waterways entering the Corner Inlet Marine National Park monthly between November 2009 and April 2010, with the Chemcatcher passive sampler system deployed at these sites in November 2009 and March 2010. Trace metal concentrations were low, with none occurring at concentrations with the potential for adverse ecological effects. The agrochemical residues data showed the presence of a small number of pesticides at very low concentration (ng/L) in the surface waters of streams entering the Corner Inlet, and as widespread, but still limited contamination of sediments. Concentrations of pesticides detected were relatively low and several orders of magnitude below reported ecotoxicological effect and hazardous concentration values. The low levels of pesticides detected in this study indicate that agricultural industries were responsible agrochemical users. This research project is a rarity in aligning both agrochemical usage data obtained from chemical resellers in the target catchment with residue analysis of environmental samples. Based on frequency of detection and concentrations, prometryn is the priority chemical of concern for both the water and sediments studied, but this chemical was not listed in reseller data. Consequently, the risks may be greater than the field data would suggest, and priorities for monitoring different since some commonly used herbicides (such as glyphosate, phenoxy acid herbicides, and sulfonyl urea herbicides) were not screened. Therefore, researchers, academia, industry, and government need to identify ways to achieve a more coordinated land use approach for obtaining information on the use of chemicals in a catchment, their presence in waterways, and the longer term performance of chemicals, particularly where they are used multiple times in a year.

The aim of this study was to demonstrate the variations in bioavailability remaining in industrial and agricultural soils contaminated by polycyclic aromatic hydrocarbons (PAHs) after bioremediation. After inoculation of Mycobacterium sp. and Mucor sp., PAH biodegradation was tested on a manufactured gas plant (MGP) soil and an agricultural soil. PAH bioavailability was assessed before and after biodegradation using solid-phase extraction (Tenax-TA extraction) and solid-phase micro-extraction (SPME) to represent bioaccessibility and chemical activity of PAHs, respectively. Only 3- and 4-ring PAHs were noticeably biodegradable in the MGP soil. PAH biodegradation in the agricultural soil was different from that in the MGP soil. The rapidly desorbing fractions (F(rap)) extracted by Tenax-TA and the freely dissolved concentrations of 3- and 4-ring PAHs determined by SPME from the MGP soil decreased after 30 days biodegradation; those values of the 5- and 6-ring PAHs changed to a lesser degree. For the agricultural soil, the F(rap) values of the 3- and 4-ring PAHs also decreased after the biodegradation experiment. The Tenax-TA extraction and the SPME have the potential to assess variations in the bioavailability of PAHs and the degree of biodegradation in contaminated MGP soils. In addition, Tenax-TA extraction is more sensitive than SPME when used in the agricultural soil., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The adsorption behavior of pyrene on corncob was studied to provide a theoretical basis for the possible use of this material as an immobilized carrier for improving the bioremediation of PAH-contaminated soil. The results were as follows. Kinetic experiments showed that the adsorption processes obeyed a pseudo-second-order model. The intraparticle diffusion of Weber-Morris model fitting showed that the film and intraparticle diffusions were the key rate-limiting processes, and the adsorption process mainly consisted of three steps: boundary layer diffusion and two intra-particle diffusions. Experimental adsorption data for pyrene were successfully described by the adsorption-partition equilibrium model. The maximum adsorption capacity at 25°C was 214.8 μg g(-1). The adsorption contribution decreased significantly when the Ce/Sw (the equilibrium concentration/solubility in water) was higher than 1. Adsorption decreased with increased temperature. Based on the above results, the corncob particles could be helpful in the bioremediation of pyrene-contaminated soil.