Search

Machinability investigation of new material is one of the mandatory investigations to complete the purpose of creation of it. Electrical discharge machining (EDM) is one of the promising unconventional machining processes for highly accurate machining performance in difficult-to-cut material even machining complicated profiles. The powder-mixed EDM and nanopowder-mixed EDM are the improved versions of the EDM. The Al–Zn–Mg composite is reinforced with Si3N4 (9 wt. %) for meeting automotive and marine applications. The aluminium nanoparticles enhanced deionised water was used in NPMEDM. The nickel-coated brass and uncoated brass tube electrode were considered for the investigation. Pulse on time (µs), voltage (V), input current (A), and capacitance (nF) were independent variables and varied at 3 levels. The microhole machining performance with a coated and uncoated electrode was investigated. The L18 orthogonal array involved in the experimental design, material removal rate, and electrode wear rate were analysed. The SEM analysis was employed in the surface morphological study of electrodes before and after machining. The input parameters were optimised for the coated electrode for the responses of MRR and EWR. [ABSTRACT FROM AUTHOR]

The present study investigates aluminium alloy powder (Al7075) of mesh size 60 μm and the reinforcement SiC of varying its weight percentage (2 wt%, 4 wt%, 6 wt%) and keeping constant Al2O3 (2 wt%) of particle size <50 nm has been used to synthesis aluminium alloy hybrid nanocomposites. The compaction pressure (350 MPa) and the sintering temperature (750 °C) are used to develop such hybrid composites. The microstructure and mechanical behaviour of progressed composites have been characterized as per ASTM standards. The aluminium alloy hybrid composites sintered effectively and the strengthening particles are consistently disseminated in the matrix alloy without indication of the cluster along with the fine grains of intra dendrite grain boundaries that are precipitated throughout grains of an aluminum matrix. In comparison with base alloy, the hardness (14%) and compressive strength (24%) of synthesized composites have been increased invariably. ASTM B117 salt spray experiment has been performed to study the corrosion properties of incorporated composites. It has been inferred that corrosion-resistant is improved due to the presence of interface AlC2, Al2SiC between the intermixtures. This act as a barrier for disruption and it minimizes the effect of oxidation of developed aluminium hybrid composites. [ABSTRACT FROM AUTHOR]

This experiment investigated the feasibility of using n-butanol with Deccan hemp oil methyl ester derived from Hibiscus cannabinus. Deccan hemp oil, from warm countries like India is an eco-friendly alternative energy source since it is reusable and easy to locate. The Acetone-Butanol-Ethanol (ABE) process made the n-butanol. Further, 60% Deccan hemp oil methyl ester and 40% diesel were mixed and injected directly into the engine's cylinders. The engine's performance was evaluated by adding varying quantities of n-butanol (10%, 20%, or 30%) to the intake pipe at various intervals throughout the experiment. The results showed that using pure Deccan hemp oil or its methyl ester was much better for the engine's performance than regular diesel fuel. This was compared to how well the engine worked when diesel was used. However, the engine ran much better when fed a mix of 60% Deccan hemp oil methyl ester and 40% diesel (B60). Even though it couldn't compete with diesel engines in speed, this was still the case. The engine was running in dual fuel mode when n-butanol was added to the mixture. This made the carbon monoxide, unburned hydrocarbons, and smoke outputs go down. All of these decreases happened without making the engine less able to work. NOx emissions from the B60Bu10 (10% n-butanol share), B60Bu20, and B60Bu30 dual fuel combinations went up by 2.65%, 6%, and 8.9%, respectively, at full load, while smoke emissions went down by 18.33%, 23.75%, and 30.83%, in that order. The study's results show that adding Deccan hemp oil methyl ester to diesel fuel and injecting n-butanol into a dual-fuel diesel engine could help lower emissions without affecting the engine's performance., Competing Interests: Declarations Competing interests The authors declare no competing interests., (© 2024. The Author(s).)

The world is facing water crises because freshwater scarcity has become a global issue due to rapid population growth, resulting in the need for more industries, agriculture, and domestic sectors. Therefore, it is challenging for scientists and environmental engineers to treat wastewater with cost-effective treatment techniques. As compared to conventional processes (physical, chemical, and biological), advanced oxidation processes (AOP) play an essential role in the removal of wastewater contaminants, with the help of a powerful hydroxyl (OH•) through oxidation reactions. This review study investigates the critical role of O 3 -based Advanced Oxidation Processes (AOPs) in tackling the complex difficulties of wastewater treatment. Effective treatment methods are critical, with wastewater originating from various sources, including industrial activity, pharmaceutical manufacturing, agriculture, and a wide range of toxins. O 3 -based AOPs appear to be powerful therapies capable of degrading a wide range of pollutants, including stubborn organics, medicines, and pesticides, reducing environmental and human health risks. This review sheds light on their efficacy in wastewater treatment by explaining the underlying reaction mechanisms and applications of several O 3 -based AOP processes, such as O 3 , O 3 /UV, and O 3 /H 2 O 2 . Ozone, a powerful oxidizing agent, stimulates the breakdown of complex chemical molecules by oxidation processes, which are aided further by synergistic combinations with ultraviolet (UV) radiation or hydrogen peroxide (H 2 O 2 ). Notably, while ozonation alone may not always produce the best outcomes, it acts as an essential pretreatment step prior to traditional treatments, increasing total treatment efficiency. Furthermore, O 3 -based AOPs' transformational capacity to convert organic chemicals into simpler, more stable inorganic forms with little sludge creation emphasizes its sustainability and environmental benefits. This study sheds light on the processes, uses, and benefits of O 3 -based AOPs, presenting practical solutions for sustainable water management and environmental protection. It is a valuable resource for academics, engineers, and politicians looking for new ways to combat wastewater contamination and protect water resources., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The utilization of natural fibres often entails a lesser environmental impact when compared to synthetic fibres. Biodegradable natural fibres minimize waste and pollution, and promote sustainability, but their weaker bonds limit their resilience. These issues can be addressed by customizing the composite's mechanical properties with natural and synthetic fibres. In this study, hybrid composites were created using the hand layup method with a novel dissimilar layer arrangement of neem (N), sisal (S), and glass (G) fibre and analyze its mechanical and thermal properties. Experimental observation shows that the GN composite had a higher maximum ultimate tensile strength of 26 N/mm 2 than the GS, GNS, and GSN composites. The GN composite had a percentage elongation of 6.33%, similar to the percentage elongation of the GS composite (6.833%), and it also had a higher ultimate shear strength of 50 MPa. The composite GS absorbed 6.6 J energy, higher than the composites GN, GNS, and GNS, which absorbed 6.1 J, 4.5 J, and 4.5 J, respectively. The fractured surface's SEM images were obtained and analyzed for failure. The results demonstrated that the hybridization was effective, and better properties can be obtained by combining neem, sisal, and glass fiber, and it can be used for other requirements, including strength, weight, cost, and ecological impact., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Mg-Al-Zn alloys are widely preferred in many applications by considering their excellent properties of high stiffness-to-weight ratio, lightweight, high strength-to-weight ratio, low density, castability, high-temperature mechanical properties, machinability, high corrosion resistance, and great damping. Improving the properties of such alloys is challenging due to their hexagonal crystal structure and other alloying limitations. This study aims to synthesize Mg-Al-Zn alloy by incorporating the alloying elements 8.3 wt% Al, 0.35 wt% Zn on pure magnesium (Control specimen). Then synthesize Mg-Al-Zn/BN/B 4 C hybrid composite by reinforcing B 4 C at three weight proportions (3 wt%, 6 wt%, 9 wt%) along with constant solid lubricant BN (3 wt%) through a stir casting process. The hybrid composite samples were characterized and compared with the performances of the control specimen. The results reveal that 9 wt% B 4 C reinforced samples outperformed through recording the improvement of tensile strength by 28.94%, compressive strength by 37.89%, yield strength by 74.63%, and hardness by 14.91% than the control specimen. Apart from this, it has reduced the corrosion area (37.81%) and noticed negligible changes in density (increased by 0.03%) and porosity (decreased by 0.01%) than the control specimen. The samples were characterized using SEM, XRD, and EDAX apparatus., (© 2022. The Author(s).)