Search

Mn-doped AlN nanowires were synthesized by in situ doping of Mn using a chemical vapor deposition method. Analyses of microstructure and chemical compositions indicate that the as-prepared samples were homogenously Mn-doped AlN nanowires. The low temperature photoluminescence, and magnetization as a function applied magnetic field of the Mn-doped AlN nanowires were investigated. A Curie temperature higher than 300 K was observed from the as-doped nanowires. The room temperature ferromagnetic properties of the synthesized Mn-doped AlN nanowires make it an excellent candidate for applications in future spintronic nanodevices. [ABSTRACT FROM AUTHOR]

FeCo-codoped ZnO nanowires were synthesized by in situ doping with iron and cobalt using a chemical vapor deposition method. Structure and compositional analysis indicated that the as-prepared nanowires were single- crystalline and FeCo codoped. No FeCo clusters and other secondary phases were found in the nanowires. A Curie temperature higher than 300 K was observed from the as-doped nanowires. The room temperature ferromagnetic properties of the synthesized Zn1-x(FeCo)xO nanowire make it useful in future spintronic devices. [ABSTRACT FROM AUTHOR]

To investigate the hot electron population and the appearance of kinetic instabilities in highly charged electron cyclotron resonance ion source (ECRIS), the axially emitted bremsstrahlung spectra and microwave bursts emitted from ECRIS plasma were synchronously measured on SECRAL-II (Superconducting ECR ion source with Advanced design in Lanzhou No. II) ion source with various magnetic field configurations. The experimental results show that when the ratio of the minimum field to the resonance field (i.e. Bmin/Becr) is less than ∼0.8, the bremsstrahlung spectral temperature Ts increases linearly with the Bmin/Becr–ratio when the injection, extraction and radial mirror fields are kept constant. Above this threshold Ts saturates and the electron cyclotron instability appears simultaneously. This study has also demonstrated that Ts decreases linearly with the increase of the average gradient over the ECR surface when the on-axis gradient and hexapole field strengths are constant. In addition, it is found that Ts decreases with the increase of the gradient at the resonance zone (∇Becr on axis and <∇Becr>) at relatively low mirror ratio and is insensitive to the gradient at high mirror ratio when Bmin is constant. Compared to a recent study taken on a fully superconducting ECRIS (Benitez et al 2017 IEEE Trans. Plasma Sci. 45 1746–54), in which it was concluded that Ts is only sensitive with Bmin, this article shows different results discussing the mechanisms behind the correlation of magnetic field parameters to Ts. [ABSTRACT FROM AUTHOR]

In order to diagnose the electron cyclotron resonance (ECR) plasma, a high-efficiency collimation system has been developed at the Institute of Modern Physics, and the bremsstrahlung spectra in the range of 10 keV–300 keV were measured on a third generation superconducting ECR ion source, SECRAL-II, with a CdTe detector. Used as a comparative index of the mean energy of the high energy electron population, the spectral temperature, Ts, is derived through a linear fitting of the spectra in a semi-logarithmic representation. The influences of some main source parameters, such as the neutral gas pressure, extraction voltage, microwave power, and bias disk voltage, on the high energy electrons are systemically investigated. [ABSTRACT FROM AUTHOR]

The Space Environment Simulation and Research Infrastructure project, which uses various ion beams as irradiated materials in life science research, is being built at the Harbin Institute of Technology. A new room temperature electron cyclotron resonance ion source, the Lanzhou Electron Cyclotron Resonance Ion Source No. 5 (LECR5), has been designed and constructed. It is an intense, highly charged, heavy ion beam injector which generates ion beams from H to Bi, typically ∼50 eμA 209Bi32+. The LECR5 is designed to operate at microwave frequencies in the range of 14.5–18 GHz. The typical magnetic parameters are designed based on those optimized for SECRAL, which operates at 18 GHz. This paper presents the LECR5 ion source, its test bench, and the preliminary beam results. [ABSTRACT FROM AUTHOR]

Ion source development over the last 20 years at the IMP is reviewed. For versatile purposes, several types of ion sources have been involved in the research and development work at the IMP, i.e., the highly charged ECR (Electron Cyclotron Resonance) ion source, intense microwave ion source or the 2.45 GHz intense beam ECR ion source, and laser ion source (LIS). In the development of ECR ion sources, SECRAL (Superconducting ECR ion source with Advanced design in Lanzhou), Lanzhou ECR ion source, and Lanzhou all permanent magnet ECR ion source series have been made, which can cover the operation microwave frequency range of 10–28 GHz. The LIS with an Nd:YAG laser with a maximum output energy of 8 J in 8 ns pulse duration has been developed for very intense short pulse ion beams from solid materials such as C, Ti, Ni, Ag, and so on. Microwave ion sources have been built to produce intense pulsed or direct current beams from several mA to 100 mA for either high intensity accelerators or applications. This paper will give an overview of the high intensity ion source development at the IMP, especially on the recent progress and new results, such as the status of the fourth generation ECR ion source (first fourth generation ECR ion source), the production of recorded highly charged ion beams with SECRAL sources, key technology research studies, and so on. [ABSTRACT FROM AUTHOR]

The efficiency of the microwave-plasma coupling is a key issue to enhance the performance of electron cyclotron resonance ion sources (ECRISs) in terms of higher ion beam intensity yield. The coupling properties are affected by the microwave coupling scheme, especially for the high frequency (f > 20 GHz) and high power (P > 5 kW) ECR ion sources. Based on the study of 24 GHz SECRAL ion source performances working at different launching systems, a new microwave coupling scheme, called the Vlasov launcher, is proposed, which can not only realize efficient power matching and feeding but also enhance the microwave power distribution on the ECR surface. The first promising results are presented in this article. Then, a prototype dedicated to the next generation ECRIS is described. [ABSTRACT FROM AUTHOR]

LAPECR3 (Lanzhou All Permanent magnet Electron cyclotron Resonance ion source No. 3) had been developed as an ion injector of Heavy Ion Medical Machine (HIMM) accelerator facility since 2009. The first HIMM accelerator facility was built in Wuwei city in 2015, and the LAPCER3 ion source has delivered C5+ ion beam to HIMM for more than 1000 days in the past four years. In order to improve the performance of the LAPECR3 ion source for intense carbon beams production, continuous research and development work has been made. The recently developed LAPECR3 ion source together with the new low-energy beam transportation can provide better performance in terms of both beam intensity and quality. This paper will generally review the LAPECR3 ion source operation status for HIMM, and the recent improvement will be presented, especially the stable beams production of C4+ and C5+. [ABSTRACT FROM AUTHOR]

A high intensity highly charged laser ion source has been studied at the Institute of Modern Physics for the last few years. In order to investigate the processes of plasma heating and expansion of laser produced plasma, the charge state and energy distributions of the ions from pure copper, silver, and copper-silver alloy, in which the atom number ratio between copper and silver is 2:3, were measured with a 90° cylindrical electrostatic ion analyzer. It was shown that the yields of highly charged copper ions from the pure copper target are higher compared with those of the alloy target. In contrast, higher yields of highly charged silver ions were obtained from the copper-silver alloy target. Moreover, the ion energy distributions were derived from the time-of-flight spectra for the ions with different ion charge states and compared between the pure metal and alloy targets. [ABSTRACT FROM AUTHOR]

HIAF (High Intensity heavy ion Accelerator Facility) is a new accelerator complex under construction at the Institute of Modern Physics. As the main injector of this project, the high-charge-state ECR ion source needs to provide intense uranium beams, such as 700 eμA of U35+. This requires the performance of metal ovens to be further improved so that the crucible can operate at an ultrahigh temperature for a long time without damage in a high magnetic field (>3 T). In order to meet these requirements, an inductive oven with special thermal shielding and support has been developed in the past two years. The off-line test result has shown that this oven can reach up to 2000 °C with ∼1.2 kW of heating power. After ∼5 days of continuous running on the SECRAL-II platform, the tantalum crucible survived. In this contribution, we will discuss the structure of this inductive oven and analyze the test results as well. [ABSTRACT FROM AUTHOR]

A negative oxygen ion source is under development to produce O− and O2− beams used for a secondary ion mass spectrometer at Institute of Modern Physics (IMP), and both filament and radio frequency (RF) schemes are tested. The filament driven ion source, which was initially designed for H− production, has a 10-pole multicusp plasma chamber, two sets of virtual magnetic filters, and a 3-electrode extraction system. The RF scheme, which is improved by changing a RF back plate from the filament ion source, has an external planar spiral RF antenna behind an AlN window. The RF power system consists of a continuous wave (CW) 13.56 MHz/2 kW power supply, a capacitive automatching network and a water-cooled flat RF antenna made from a 6-mm copper tube. Oxygen and carbon dioxide gases are used to produce O− and O2− ion beams, and ion composition is analyzed by using a Wien filter. However, the lifetime of filaments sustains from several minutes to hours before fracture occurred while the RF one can work stably with no maintenance, and the experiment results will be given on O− ion production with two different technologies using our ion source test facility. [ABSTRACT FROM AUTHOR]

Abstract: Supranutritional dietary selenium (Se) has been demonstrated beneficial for fish health, however, its effects on fish flesh quality remain unclear. This study investigated the effects of supranutritional dietary Se on the flesh quality of rainbow trout (Oncorhynchus mykiss) and their potential mechanism. Fish were fed a basal diet supplemented with or without graded Se yeast for 10 weeks. Results showed that Se supplementation significantly increased fillet crude protein and enhanced fillet water‐holding capacity as well as fillet firmness. Supplementing with both 2 and 4 mg/kg Se significantly downregulated the expressions of two autophagy–lysosome‐related genes (autophagy‐related 12‐like and gamma‐aminobutyric acid type A receptor‐associated protein‐like 1) in fish muscle, while supplementing with 4 mg/kg Se also significantly downregulated the expression of two ubiquitin–proteasome‐related genes (muscle RING finger 2 and F‐box protein 25). Correlation analysis indicated that the improved fillet quality parameters were closely correlated with the expressions of these differentially expressed genes. This study revealed that dietary Se was effective for the improvement of rainbow trout flesh quality, and the improved fish flesh quality was associated with the inhibited protein degradation in fish muscle. [ABSTRACT FROM AUTHOR]

A laser ion source based on Nd:YAG laser has been being studied at the Institute of Modern Physics for the production of high intensity high charge state heavy ion beams in the past ten years, for possible applications both in a future accelerator complex and in heavy ion cancer therapy facilities. Based on the previous results for the production of multiple-charged ions from a wide range of heavy elements with a 3 J/8 ns Nd:YAG laser [Zhao et al., Rev. Sci. Instrum. 85, 02B910 (2014)], higher laser energy and intensity in the focal spot are necessary for the production of highly charged ions from the elements heavier than aluminum. Therefore, the laser ion source was upgraded with a new Nd:YAG laser, the maximum energy of which is 8 J and the pulse duration can be adjusted from 8 to 18 ns. Since then, the charge state distributions of ions from various elements generated by the 8 J Nd:YAG laser were investigated for different experimental conditions, such as laser energy, pulse duration, power density in the focal spot, and incidence angle. It was shown that the incidence angle is one of the most important parameters for the production of highly charged ions. The capability of producing highly charged ions from the elements lighter than silver was demonstrated with the incidence angle of 10° and laser power density of 8 × 1013 W cm-2 in the focal spot, which makes a laser ion source complementary to the superconducting electron cyclotron resonance ion source for the future accelerator complex especially in terms of the ion beam production from some refractory elements. Nevertheless, great efforts with regard to the extraction of intense ion beams, modification of the ion beam pulse duration, and reliability of the ion source still need to be made for practical applications. [ABSTRACT FROM AUTHOR]

LECR4 (Lanzhou electron cyclotron resonance ion source No. 4) has been successfully constructed at IMP and has also been connected with the Low Energy Beam Transport (LEBT) and Radio Frequency Quadrupole (RFQ) systems. These source magnet coils are cooled through evaporative cooling technology, which is the first attempt with an ECR ion source in the world. The maximum mirror field is 2.5 T (with iron plug) and the effective plasma chamber volume is 1.2 l. It was designed to be operated at 18 GHz and aimed to produce intense multiple charge state heavy ion beams for the linear injector project SSC-Linac at IMP. In February 2014, the first analyzed beam at 18 GHz was extracted. During about three months' commissioning, some outstanding results have been achieved, such as 1.97 emA of O6+, 1.7 emA of Ar8+, 1.07 emA of Ar9+, and 118 euA of Bi28+. The source has also successfully delivered O5+ and Ar8+ ion beams for RFQ commissioning in April 2014. This paper will give a brief overview of the design of LECR4. Then, the latest results of this source at 18 GHz will be presented. [ABSTRACT FROM AUTHOR]

Our and others' previous studies have shown that Schistosoma japonicum ( SJ) infection can inhibit allergic reactions. We recently reported that DCs played an important role in SJ infection-mediated inhibition of allergy, which was associated with enhanced IL-10 and T regulatory cell responses. Here, we further compared the role of CD8α+ DC and CD8α− DC subsets for the inhibitory effect. We sorted CD8α+ DC ( SJCD8α+ DC) and CD8α− DC ( SJCD8α− DC) from SJ-infected mice and tested their ability to modulate allergic responses in vivo. The data showed that the adoptive transfer of SJCD8α− DC was much more efficient than SJCD8α+ DC for the suppression of allergic airway eosinophilia, mucus overproduction, antigen-specific IgE responses, and Th2 cytokines ( IL-4 and IL-5). More importantly, we found that the transfer of SJCD8α− DC, but not SJCD8α+ DC, significantly increased IL-10 and TGF-β production following OVA exposure. As control, the transfer of DC subsets from naïve mice had no significant effect on allergic inflammation. In addition, SJCD8α- DC expressed significantly higher IL-10 but lower IL-12, CD80 and CD86 than SJCD8α+ DC, fitting a tolerogenic phenotype. The results suggest that CD8α− DC is the predominant DC subset which is involved in the parasitic infection-mediated inhibition of allergic inflammation and possibly through enhancing immunomodulatory cytokine ( IL-10 and TGF-β) production. [ABSTRACT FROM AUTHOR]

The Gamow-Teller (GT) strength distributions and isobaric analog resonance (IAR) states of several N = Z + 2 nuclei with mass number A = 42 - 58 are studied by using a self-consistent Skyrme Hartree-Fock-Bogoliubov method plus quasiparticle random phase approximation (HFB+QRPA) formalism. The isoscalar spin-triplet pairing interaction is included in QRPA on top of the isovector spin-singlet one in the HFB method. It is found that the isoscalar pairing correlations mix largely the (νj> → πj<) configurations into the low-energy states, and this mixing plays an important role in the formation and in the collectivity of these low-energy states. Furthermore, the observed excitation energy of the low-energy GT state with respect to the IAR can be well reproduced when the strength of isoscalar pairing is about 1.0-1.05 times that of the isovector pairing, irrespective of the adopted Skyrme interactions. In N = Z + 2 nuclei in the middle of the pf-shell, a mutual cooperative effect of isoscalar pairing and tensor interaction is found; namely, the tensor force reduces the spin-orbit splittings and enhances the effect of the isoscalar pairing. [ABSTRACT FROM AUTHOR]

Experimental evidence of the property of transverse coupling of beam from Electron Cyclotron Resonance (ECR) ion source is presented. It is especially of interest for an ECR ion source, where the cross section of extracted beam is not round along transport path due to the magnetic confinement configuration. When the ions are extracted and accelerated through the descending axial magnetic field at the extraction region, the horizontal and vertical phase space strongly coupled. In this study, the coupling configuration between the transverse phase spaces of the beam from ECR ion source is achieved by beam back-tracking simulation based on the measurements. The reasonability of this coupling configuration has been proven by a series of subsequent simulations. [ABSTRACT FROM AUTHOR]

Electron cyclotron resonance ion sources are widely used in heavy ion accelerators in the world because they are capable of producing high current beams of highly charged ions. However, the design of the Q/A selector system for these devices is challenging, because it must have a sufficient ion resolution while controlling the beam emittance growth. Moreover, this system has to be matched for a wide range of ion beam species with different intensities. In this paper, research on the Q/A selector system at the SECRAL (Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou) platform both in experiment and simulation is presented. Based on this study, a new Q/A selector system has been designed for SECRAL II. The features of the new design including beam simulations are also presented [ABSTRACT FROM AUTHOR]

As one of the candidate ion sources for a planned project, the High Intensity heavy-ion Accelerator Facility, a laser ion source has been being intensively studied at the Institute of Modern Physics in the past two years. The charge state distributions of ions produced by irradiating a pulsed 3 J/8 ns Nd:YAG laser on solid targets of a wide range of elements (C, Al, Ti, Ni, Ag, Ta, and Pb) were measured with an electrostatic ion analyzer spectrometer, which indicates that highly charged ions could be generated from low-to-medium mass elements with the present laser system, while the charge state distributions for high mass elements were relatively low. The shot-to-shot stability of ion pulses was monitored with a Faraday cup for carbon target. The fluctuations within ±2.5% for the peak current and total charge and ±6% for pulse duration were demonstrated with the present setup of the laser ion source, the suppression of which is still possible. [ABSTRACT FROM AUTHOR]

A negative hydrogen (H-) ion source with hot cathode arc discharge was designed and fabricated as a primary injector for a 10 MeV PET cyclotron at IMP. 1 mA dc H- beam with ε N RMS = 0.08 ж mm mrad was extracted at 25 kV. Halbach hexapole was adopted to confine the plasma. The state of arc discharge, the parameters including filament current, arc current, gas pressure, plasma electrode bias, and the ratio of ... were experimentally studied. The discussion on the result, and opinions to improve the source were given. [ABSTRACT FROM AUTHOR]

Evaporative cooling technology utilizes phase-change heat transfer mode to achieve the cooling for heating equipment. The heat transfer capacity of evaporative cooling technology is far more than air or water cooling technology. The Electron Cyclotron Resonance ion source magnet is a typical super-high power density magnet, and the evaporative cooling technology is an ideal cooling method for the coils of magnet. In this paper we show the structure and process of coils and the special design of flow channels of coolant for an experiment magnet model. Additionally, the heat transfer circulation is presented and analyzed. By the finite element method, the flow channels are optimized to rationally allocate coolant and to reduce the temperature of coils. For the experiment model, the current density of copper wire of coils is 19 A/mm2² and the coil-windows current density is larger than 12 A/mm². The max temperature of coils is below 80 °C, and the total heat is about 200 kW. [ABSTRACT FROM AUTHOR]

The multipole dependent effects induced by tensor correlations on the charge-exchange spin-dipole (SD) modes of the light nucleus 16O are studied within a Hartree-Fock (HF) plus self-consistent random-phase approximation (RPA), using Skyrme-type interactions. The role played by the triplet-even and triplet-odd tensor terms are examined separately to explain either the softening or hardening of the excitation energies of SD modes. The unperturbed and RPA summed strengths, calculated with and without the tensor force, are discussed and compared with the results of shell-model calculations. [ABSTRACT FROM AUTHOR]

Gamow-Teller (GT) and charge-exchange spin-dipole (SD) excitation energies in 90Zr and 208Pb are systematically studied to determine the appropriate magnitude of the tensor terms of the Skyrme interactions. We have found that the centroid energies of GT and SD excitations are sensitive to the adopted strengths of the triplet-even and triplet-odd tensor interactions. Especially, the 1- SD state plays a crucial role in constraining the triplet-even part while the triplet-odd part is related rather to the GT peaks. Among the 36 TIJ parameter sets that include nonperturbatively the tensor terms, the four sets, T21, T32, T43, and T54, give reasonable results for the centroid energies in comparison with the experimental data. The sign and magnitude of the tensor terms are also discussed when these terms are added to the existing Skyrme interactions SGII and SLy5. The triplet-even strength can be constrained in a narrow range by using the available experimental data while further empirical data are needed to set a constraint on the triplet-odd term. [ABSTRACT FROM AUTHOR]

In the framework of the Hartree-Fock-Bogoliubov approach with the Skyrme interactions SLy5, SLy5+T, SLy5+Tw, and several sets of the TIJ parametrizations (Skyrme effective interaction parametrizations including the tensor terms), the effect of the tensor force on the shell evolution at Z,N=8, 20, and 28 is investigated. It is shown that the evolution of the gap (defined as the energy difference between the last occupied and first unoccupied single-particle orbits) with SLy5+T is similar to that with SLy5+Tw, and the gap values with SLy5+T are smaller than those with SLy5+Tw in the cases of Z,N=8, 20. At Z, N = 28, the gap values with SLy5 are smaller than those with SLy5+T and larger than those with SLy5+Tw. To understand these features, we analyze the spin-orbit potentials with and without the tensor contributions and the radial wave functions of relevant orbits. Meanwhile, we find that the deviation of the calculated gaps with SLy5+Tw from the experimental ones is larger than that with SLy5+T. This indicates that SLy5+Tw is not suitable for investigating the properties of the ground-state gap evolution. Finally, it is seen that the gap evolutions with different sets of the TIJ parametrizations are similar to each other except for the ones with T22, and there is almost no difference between the tensor effect in gap evolution with the perturbative method and the one with the complete fitting method. [ABSTRACT FROM AUTHOR]

Superconducting electron cyclotron resonance ion source with advanced design in Lanzhou (SECRAL) is an all-superconducting-magnet electron cyclotron resonance ion source (ECRIS) for the production of intense highly charged ion beams to meet the requirements of the Heavy Ion Research Facility in Lanzhou (HIRFL). To further enhance the performance of SECRAL, an aluminum chamber has been installed inside a 1.5 mm thick Ta liner used for the reduction of x-ray irradiation at the high voltage insulator. With double-frequency (18+14.5 GHz) heating and at maximum total microwave power of 2.0 kW, SECRAL has successfully produced quite a few very highly charged Xe ion beams, such as 10 e μA of Xe37+, 1 e μA of Xe43+, and 0.16 e μA of Ne-like Xe44+. To further explore the capability of the SECRAL in the production of highly charged heavy metal ion beams, a first test run on bismuth has been carried out recently. The main goal is to produce an intense Bi31+ beam for HIRFL accelerator and to have a feel how well the SECRAL can do in the production of very highly charged Bi beams. During the test, though at microwave power less than 3 kW, more than 150 e μA of Bi31+, 22 e μA of Bi41+, and 1.5 e μA of Bi50+ have been produced. All of these results have again demonstrated the great capability of the SECRAL source. This article will present the detailed results and brief discussions to the production of highly charged ion beams with SECRAL. [ABSTRACT FROM AUTHOR]

Superconducting electron cyclotron resonance ion source with advance design in Lanzhou (SECRAL) is an 18–28 GHz fully superconducting electron cyclotron resonance (ECR) ion source dedicated for highly charged heavy ion beam production. SECRAL, with an innovative superconducting magnet structure of solenoid-inside-sextupole and at lower frequency and lower rf power operation, may open a new way for developing compact and reliable high performance superconducting ECR ion source. One of the recent highlights achieved at SECRAL is that some new record beam currents for very high charge states were produced by 18 GHz or 18+14.5 GHz double frequency heating, such as 1 e μA of 129Xe43+, 22 e μA of 209Bi41+, and 1.5 e μA of 209Bi50+. To further enhance the performance of SECRAL, a 24 GHz/7 kW gyrotron microwave generator was installed and SECRAL was tested at 24 GHz. Some promising and exciting results at 24 GHz with new record highly charged ion beam intensities were produced, such as 455 e μA of 129Xe27+ and 152 e μA of 129Xe30+, although the commissioning time was limited within 3–4 weeks and rf power only 3–4 kW. Bremsstrahlung measurements at 24 GHz show that x-ray is much stronger with higher rf frequency, higher rf power. and higher minimum mirror magnetic field (minimum B). Preliminary emittance measurements indicate that SECRAL emittance at 24 GHz is slightly higher that at 18 GHz. SECRAL has been put into routine operation at 18 GHz for heavy ion research facility in Lanzhou (HIRFL) accelerator complex since May 2007. The total operation beam time from SECRAL for HIRFL accelerator has been more than 2000 h, and 129Xe27+, 78Kr19+, 209Bi31+, and 58Ni19+ beams were delivered. All of these new developments, the latest results, and long-term operation for the accelerator have again demonstrated that SECRAL is one of the best in the performance of ECR ion source for highly charged heavy ion beam production. Finally the future development of SECRAL will be presented. [ABSTRACT FROM AUTHOR]

Two compact intense 2.45 GHz permanent magnet proton sources and their corresponding low energy beam transport (LEBT) system were developed successfully for China accelerator driven sub-critical system in 2014. Both the proton sources operate at 35 kV potential. The beams extracted from the ion source are transported by the LEBT, which is composed of two identical solenoids, to the 2.1 MeV Radio-Frequency Quadrupole (RFQ). In order to ensure the safety of the superconducting cavities during commissioning, an electrostatic-chopper has been designed and installed in the LEBT line that can chop the continuous wave beam into a pulsed one. The minimum width of the pulse is less than 10 μs and the fall/rise time of the chopper is about 20 ns. The performance of the proton source and the LEBT, such as beam current, beam profile, emittance and the impact to RFQ injection will be presented. [ABSTRACT FROM AUTHOR]

LECR4 (Lanzhou ECR ion source No. 4) is a room temperature electron cyclotron resonance ion source, designed to produce high current, high charge state ion beams for the SSC-LINAC injector (a new injector for sector separated cyclotron) at the Institute of Modern Physics. LECR4 also serves as a PoP machine for the application of evaporative cooling technology in accelerator field. To achieve those goals, LECR4 ECR ion source has been optimized for the operation at 18 GHz. During 2014, LECR4 ion source was commissioned at 18 GHz microwave of 1.6 kW. To further study the influence of injection stage to the production of medium and high charge state ion beams, in March 2015, the injection stage with pumping system was installed, and some optimum results were produced, such as 560 eμA of O7+, 620 eμA of Ar11+, 430 eμA of Ar12+, 430 eμA of Xe20+, and so on. The comparison will be discussed in the paper. [ABSTRACT FROM AUTHOR]

In order to investigate the hot electron component in electron cyclotron resonance (ECR) plasmas, the volume bremsstrahlung spectra in the x-ray photon energy range were measured with a high-purity germanium detector on Lanzhou ECR Ion Source No. 2 Modified (LECR2M). A collimation system similar to Bernhardi’s was used to focus at the central part of the plasma. The ion source was operated under various source conditions with argon; sometimes oxygen was added to enhance high charge state ion beam intensities. The spectral temperature of hot electrons Tspe was derived from the measured bremsstrahlung spectra. The evolution of the deduced temperature of hot electrons Tspe with the ion source parameters, such as the rf frequency, power, and the magnetic confinement configuration, was investigated. [ABSTRACT FROM AUTHOR]

To satisfy the requirements of surface and atomic physics study in the field of low energy multiple charge state ion incident experiments, a low energy (10 eV/q–20 keV/q) ion beam platform is under design at IMP. A simple test bench has been set up to test the ion beam deceleration systems. Considering virtues such as structure simplicity, easy handling, compactness, cost saving, etc., an all-permanent magnet ECRIS LAPECR1 [Lanzhou all-permanent magnet electron cyclotron resonance (ECR) ion source No. 1] working at 14.5 GHz has been adopted to produce intense medium and low charge state ion beams. LAPECR1 source has already been ignited. Some intense low charge state ion beams have been produced on it, but the first test also reveals that many problems are existing on the ion beam transmission line. The ion beam transmission mismatches result in the depressed performance of LAPECR1, which will be discussed in this paper. To obtain ultralow energy ion beam, after being analyzed by a double-focusing analyzer magnet, the selected ion beam will be further decelerated by two afocal deceleration lens systems, which is still under design. This design has taken into consideration both ions slowing down and also ion beam focusing. In this paper, the conceptual design of deceleration system will be discussed. [ABSTRACT FROM AUTHOR]

Extreme ultraviolet lithography (EUVL) is considered as the most promising solution at and below dynamic random access memory 32 nm half pitch among the next generation lithography, and EUV light sources with high output power and sufficient lifetime are crucial for the realization of EUVL. However, there is no EUV light source completely meeting the requirements for the commercial application in lithography yet. Therefore, ECR plasma is proposed as a novel concept EUV light source. In order to investigate the feasibility of ECR plasma as a EUV light source, the narrow band EUV power around 13.5 nm emitted by two highly charged ECR ion sources—LECR2M and SECRAL—was measured with a calibrated EUV power measurement tool. Since the emission lines around 13.5 nm can be attributed to the 4d-5p transitions of Xe XI or the 4d-4f unresolved transition array of Sn VIII-XIII, xenon plasma was investigated. The dependence of the EUV throughput and the corresponding conversion efficiency on the parameters of the ion source, such as the rf power and the magnetic confinement configurations, were preliminarily studied. [ABSTRACT FROM AUTHOR]

Two high magnetic field hexapoles for electron cyclotron resonance ion source (ECRIS) have successfully fabricated to provide sufficient radial magnetic confinement to the ECR plasma. The highest magnetic field at the inner pole tip of one of the magnets exceeds 1.5 T, with the inner diameter (i.d.)=74 mm. The other hexapole magnet provides more than 1.35 T magnetic field at the inner pole tip, and the i.d. is 84 mm. In this article, we discuss the necessity to have a good radial magnetic field confinement and the importance of a Halbach hexapole to a high performance ECRIS. The way to design a high magnetic field Halbach structure hexapole and one possible solution to the self-demagnetization problem are both discussed. Based on the above discussions, two high magnetic field hexapoles have been fabricated to be utilized on two high performance ECRISs in Lanzhou. The preliminary results obtained from the two ECR ion sources are given. [ABSTRACT FROM AUTHOR]

A kind of magnetorheological elastomers based on polyurethane (PU)/silicone rubber (Si-rubber) hybrid is fabricated without applying magnetic fields. The MR effect is improved by optimizing preparation conditions, in particular by adjusting PU/Si-rubber ratio, and improving compatibility between PU and Si-rubber. The influences of the preparation condition and the relationship between the microstructure and MR effect of this kind of magnetorheological elastomers are discussed in detail. The results show that this kind of MR elastomers has better MR effect than that of MR elastomers based on pure Si-rubber or PU matrix with same testing conditions. SEM analysis indicates that the former forms a peculiar interpenetrating microstructure in the presence of PU in the matrix. The maximum increase in shear modulus of this kind of MR elastomers can be up to 0.5MPa when exposed to a magnetic field of about 0.2T. [ABSTRACT FROM AUTHOR]

Intense heavy ion beams have been produced from IMP 14.5 GHz LECR3 by optimization of the ion source conditions and transmission efficiency. Highly charged stable beams, such as 325 eμA of Ar11+, 95 eμA of Xe26+, 7 eμA of Xe30+, 140 eμA of Fe13+, and 75 eμA of Ni12+, were obtained by 14.5 GHz rf power 800–1000 W. Furthermore, an advanced superconducting ECR ion source named SECRAL is being constructed. SECRAL is designed to operate at rf frequency 18–28 GHz with axial mirror magnetic fields 4.0 T at injection, 2.2 T at extraction, and sextupole field 2.0 T at the plasma chamber wall. The unique feature of this superconducting ECR source is that the sextupole is located outside of the three axial solenoid coils to reduce the interaction force and make the source more compact. Fabrications of the superconducting coils, cryostat, beam transmission line, and other components are almost completed. Tests of the superconducting magnet with sextupole and solenoid coils are under way. © 2004 American Institute of Physics. [ABSTRACT FROM AUTHOR]

Superconducting ECR ion sources can produce intense highly charged ion beams for the application in heavy ion accelerators. Superconducting Electron Resonance ion source with Advanced Design (SECRAL) is one of the few fully superconducting ECR ion sources that has been successfully built and put into routine operation for years. With enormous efforts and R&D work, promising results have been achieved with the ion source. Heated by the microwave power from a 7 kW/24 GHz gyrotron microwave generator, very intense highly charged gaseous ion beams have been produced, such as 455 eµA Xe27+, 236 eµA Xe30+, and 64 eµA Xe35+. Since heavy metallic ion beams are being more and more attractive and important for many accelerator projects globally, intensive studies have been made to produce highly charged heavy metal ion beams, such as those from bismuth and uranium. Recently, 420 eµA Bi30+ and 202 eµA U33+ have been produced with SECRAL source. This paper will present the latest results with SECRAL, and the operation status will be discussed as well. An introduction of recently started SECRAL II project will also be given in the presentation. [ABSTRACT FROM AUTHOR]

The structure and preliminary commissioning results of a new 2.45 GHz ECR proton ion source and a dual-lens low energy beam transport (LEBT) system are presented in this paper. The main magnetic field of the ion source is provided by a set of permanent magnets with two small electro-solenoid magnets at the injection and the extraction to fine tune the magnetic field for better microwave coupling. A 50 keV pulsed proton beam extracted by a three-electrode mechanism passes through the LEBT system of length of 1183 mm. This LEBT consists of a diagnosis chamber, two Glaser lenses, two steering magnets, and a final beam defining cone. A set of inner permanent magnetic rings is embedded in each of the two Glaser lenses to produce a flatter axial-field to reduce the lens aberrations. [ABSTRACT FROM AUTHOR]

Ion beam transport from the Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou (SECRAL) electron cyclotron resonance ion source was studied at the Institute of Modern Physics during 2010. Particle-in-cell simulations and experimental results have shown that both space charge and magnetic aberrations lead to a larger beam envelope and emittance growth. In the existing SECRAL extraction beam line, it has been shown that raising the solenoid lens magnetic field reduces aberrations in the subsequent dipole and results in lower emittance. Detailed beam emittance measurements are presented in this paper. [ABSTRACT FROM AUTHOR]

Electron cyclotron resonance (ECR) ion sources have been used for atomic physics research for a long time. With the development of atomic physics research in the Institute of Modern Physics (IMP), additional high performance experimental facilities are required. A 300 kV high voltage (HV) platform has been under construction since 2003, and an all permanent magnet ECR ion source is supposed to be put on the platform. Lanzhou all permanent magnet ECR ion source No. 2 (LAPECR2) is a latest developed all permanent magnet ECRIS. It is a 900 kg weight and [nullset_(circle_with_slash-through)]650 mm×562 mm outer dimension (magnetic body) ion source. The injection magnetic field of the source is 1.28 T and the extraction magnetic field is 1.07 T. This source is designed to be running at 14.5 GHz. The high magnetic field inside the plasma chamber enables the source to give good performances at 14.5 GHz. LAPECR2 source is now under commissioning in IMP. In this article, the typical parameters of the source LAPECR2 are listed, and the typical results of the preliminary commissioning are presented. [ABSTRACT FROM AUTHOR]

To optimize the field emission behavior of the ZnO nanorods, postthermal annealing in different ambience was conducted. The field emission properties of the ZnO nanorods are considerably improved after annealing in oxygen and getting worse when annealing in air or ammonia. Photoluminescence and Raman spectroscopy were employed to elucidate the reason for such a significant improvement of the field emission when annealing in oxygen. Those detailed analyses suggested that oxygen annealing can reduce the oxygen vacancy concentration, improve the crystal quality, lower the work function, and increase the conductivity of the ZnO nanorods. Our work is important for applications of ZnO nanorods as a promising candidate in flat panel displays and high brightness electron sources. [ABSTRACT FROM AUTHOR]

A 40-year-old man presented with recurrent ocular surface masses in his left eye persisting for over a year. Despite undergoing resection of the conjunctival mass and receiving anti-inflammatory treatment at another hospital, the mass reappeared within a week post-surgery. Over the past 6 months, the mass gradually increased in size, accompanied by a decline in vision. Following conjunctival mass excision combined with amniotic membrane transplantation at Beijing Tongren Hospital, Capital Medical University, histopathological examination revealed a fungal infection of the conjunctiva, resulting in a diagnosis of fungal conjunctivitis and conjunctival granuloma in the left eye. The patient received systemic antifungal medications and local therapy, resulting in a stable condition with no recurrence of the mass.

The eukaryotic translation initiation factor eIF4E can regulate cellular translation via phosphorylation on serine 209. In a recent study, by two rounds of TMT relative quantitative proteomics, we found that phosphorylated eIF4E (p-eIF4E) favors the translation of selected mRNAs, and the encoded proteins are mainly involved in ECM-receptor, focal adhesion, and PI3K-Akt signaling. The current paper is focused on the relationship between p-eIF4E and the downstream host cell proteins, and their presumed effect on efficient entry of PEDV. We found that the depletion of membrane-residential factor TSPAN3, CD63, and ITGB2 significantly inhibited viral invasion of PEDV, and reduced the entry of pseudotyped particles PEDV-pp, SARS-CoV-pp, and SARS-CoV-2-pp. The specific antibodies of TSPAN3, CD63, and ITGB2 blocked the adsorption of PEDV into host cells. Moreover, we detected that eIF4E phosphorylation was increased at 1 h after PEDV infection, in accordance with the expression of TSPAN3, CD63, and ITGB2. Similar trends appeared in the intestines of piglets in the early stage of PEDV challenge. Compared with Vero cells, S209A-Vero cells in which eIF4E cannot be phosphorylated showed a decrease of invading PEDV virions. MNK kinase inhibitor blocked PEDV invasion, as well as reduced the accumulation of TSPAN3, CD63, and ITGB2. Further study showed that the ERK-MNK pathway was responsible for the regulation of PEDV-induced early phosphorylation of eIF4E. This paper demonstrates for the first time the connections among p-eIF4E stimulation and membrane-residential host factors. Our findings also enrich the understanding of the biological function of phosphorylated eIF4E during the viral life cycle.IMPORTANCEThe eukaryotic translation initiation factor eIF4E can regulate cellular translation via phosphorylation. In our previous study, several host factors susceptible to a high level of p-eIF4E were found to be conducive to viral infection by coronavirus PEDV. The current paper is focused on cell membrane-residential factors, which are involved in signal pathways that are sensitive to phosphorylated eIF4E. We found that the ERK-MNK pathway was activated, which resulted in the stimulation of phosphorylation of eIF4E in early PEDV infection. Phospho-eIF4E promoted the viral invasion of PEDV by upregulating the expression of host factors TSPAN3, CD63, and ITGB2 at the translation level rather than at the transcription level. Moreover, TSPAN3, CD63, or ITGB2 facilitates the efficient entry of coronavirus SARS-CoV, SARS-CoV-2, and HCoV-OC43. Our findings broaden our insights into the dynamic phosphorylation of eIF4E during the viral life cycle, and provide further evidence that phosphorylated eIF4E regulates selective translation of host mRNA., Competing Interests: The authors declare no conflict of interest.

Objective: To explore the predictive value of cerebrospinal fluid melanin-concentrating hormone (MCH) combined with other related biomarkers in preoperative cognitive dysfunction of elderly patients. Methods: A total of 80 patients who underwent elective hip or knee replacement under intravertebral anesthesia in Chifeng Municipal Hospital, Inner Mongolia, from March to November 2022 were prospectively included, with 32 males and 48 females, and aged 65-85 (70.7±5.2) years old. According to the evaluation results of the Montreal Cognitive Assessment (MoCA), patients were divided into the preoperative cognitive dysfunction ( n =23) and control ( n =57) groups. The levels of MCH, amyloid-β 40 (Aβ 40 ), amyloid-β 42 (Aβ 42 ), and phosphorylated tau protein (p-tau) in cerebrospinal fluid were determined by enzyme-linked immunosorbent assay (ELISA). The receiver operating characteristic (ROC) curve was drawn to evaluate the predictive value of each biomarker separately or in combination for preoperative cognitive dysfunction. Spearman's rank correlation analysis was utilized to test the correlation between the level of each biomarker and MoCA scores. Results: The levels of MCH, Aβ 40 , Aβ 42 , p-tau, and Aβ 42 /p-tau in the preoperative cognitive dysfunction group were (35.53±5.94) μg/L, (39.21±9.18) ng/L, (221.83±43.17) ng/L, (42.64±9.74) ng/L, and 5.53±1.92, and the levels of these biomarkers in the control group were (28.74±4.90) μg/L, (36.37±7.87) ng/L, (280.23±45.67) ng/L, (35.00±9.27) ng/L, and 8.62±2.78, respectively. Compared with the control group, the levels of cerebrospinal fluid MCH and p-tau in the preoperative cognitive dysfunction group were significantly increased (all P <0.01), and the levels of Aβ 42 and Aβ 42 /p-tau were significantly decreased (all P <0.001). MCH and Aβ 42 /p-tau provided higher predictive values. The area under the curve (AUC) of MCH and Aβ 42 /p-tau were 0.807 (95% CI : 0.703-0.911) and 0.842 (95% CI : 0.741-0.943), the sensitivity were 78.3% and 87.0%, and the specificity were 75.4% and 94.7%. MCH combined with Aβ 42 /p-tau have the higher AUC of 0.915 (95% CI : 0.837-0.992), the sensitivity (87.0%) and specificity (86.0%) were both high, which had a higher predictive value. The levels of cerebrospinal fluid MCH and p-tau were negatively correlated with MoCA score ( r =-0.467, -0.321, all P <0.01), and the levels of Aβ 42 and Aβ 42 /p-tau were positively correlated with MoCA score ( r =0.480, 0.520, all P <0.001). Conclusion: The increase in cerebrospinal fluid MCH levels is associated with preoperative cognitive dysfunction in elderly patients. MCH combined with Aβ 42 /p-tau has the greatest predictive value.

Objective: To investigate the shape and position changes of temporomandibular joint (TMJ) in adult skeletal class Ⅱ malocclusion with high angle patients after vertical mandibular control, and the correlation between vertical mandibular changes and condylar position changes. Methods: Twenty adult skeletal class Ⅱ malocclusion with high angle patients [6 males and 14 females, aged (21.4±2.4) years] who underwent extraction treatment and active vertical control in the Department of Orthodontics, Lanzhou University Stomatological Hospital from October 2017 to November 2020 were selected. Cone-beam CT data of the patient before and after treatment were imported into Invivo Dental 5.0 software for three-dimensional reconstruction and correction, and the vertical index of mandible in reconstructed lateral cephalogram (mandibular plane angle, posterior anterior height ratio, mandibular true rotation angle) were measured. Incisal angle and variables of condyle shape, position and articular fossa shape were measured. Paired t test was performed on the results before and after treatment, and the correlation between mandibular vertical changes and condylar position changes was determined by Pearson correlation coefficient calculation. Results: After treatment, the overbite and overjet were within normal range, and the vertical height of the molars was controlled. Compared with the measurement before treatment, mandibular plane angle and mandibular true rotation angle were decreased by 2.05°±1.22° ( t= 7.60, P <0.001) and 1.42°±1.92° ( t= 3.54, P= 0.002), respectively. The posterior anterior height ratio was increased by (1.89±3.32)% ( t= 2.56, P= 0.019). After treatment, the mediolateral diameter of condyle, the anteroposterior diameter of condyle, the maximum cross-sectional area of condyle, the height of condyle head, the width of articular fossa, the depth of articular fossa and the articular nodular angle were increased by (0.55±0.76) mm ( t= -2.73, P= 0.015), (0.27±3.51) mm ( t= -3.23, P= 0.006), (6.01±7.36) mm 2 ( t= -2.80, P= 0.013), (0.33±0.72) mm ( t= -2.14, P= 0.046), (0.56±0.93) mm ( t= -2.37, P= 0.032), 0.33 (0.14, 0.51) mm ( Z= -2.76, P= 0.006) and 1.50°±2.40° ( t= -2.44, P= 0.028), respectively. The internal condylar space and the external condylar space were decreased by (0.33±0.49) mm ( t= 2.31, P= 0.035) and (0.20±0.23) mm ( t= 3.58, P= 0.003), respectively. Before orthodontic treatment, 6 patients were with anterior displacement of the condyle, 7 patients with central position of the condyle, and 7 patients with posterior displacement of the condyle. After correction, patients who were with central position of the condyle have not changed much. The posterior displaced condyle in 2 patients and anterior displaced condyle in 3 patients became in central position after treatment. The joint space index was closer to the central position in 3 patients with anterior displacement and 3 patients with posterior displacement. The position of condyle in 1 patient with posterior displacement and 1 patient with anterior displacement remained basically unchanged. There was a significant negative correlation between the change of the posterior-anterior height ratio and the change of the internal condylar space in patients ( r= -0.52, P= 0.019), and a low correlation with the contral condylar space and the external condylar space( r= -0.48, P= 0.031; r= -0.47, P= 0.035). Conclusions: Skeletal class Ⅱ malocclusion with high angle adult patients achieved normal overbite and overjet and remodeling of condyle and articular fossa occurred after orthodontic treatmnet and vertical control. There was a certain negative correlation between the change of posterior-anterior height ratio and the change of condylar position.

Objective: To investigate the effects of lncRNA LINC00839 on the proliferation, migration and invasion of hepatocellular carcinoma cells and its mechanism. Methods: Real-time quantitative polymerase chain reaction (RT-qPCR) was used to detect the expression of LINC00839 and miR-3666 in hepatocellular carcinoma tissues and adjacent tissues. Pearson correlation was used to analyze the correlation between LINC00839 and miR-3666 expression in liver cancer tissues. Hepatocellular carcinoma cells MHCC97H were cultured in vitro and divided into si-NC group, si-LINC00839 group, miR-NC group, miR-3666 group, si-LINC00839+ anti-miR-NC group, and si-LINC00839+ anti-miR-3666 group. Methylthiazoletrazolium (MTT) method and clone formation experiment were used to detect cell proliferation. Transwell array was used to detect the cell migration and invasion. Western blot was used to detect the protein expressions of p21, E-cadherin and MMP-2. The double luciferase reporter gene experiment was used to verify the regulatory relationship between LINC00839 and miR-3666. Results: Compared with adjacent tissues, the expression level of LINC00839 in hepatocellular carcinoma tissues increased (2.82±0.27 vs. 0.96±0.10, P <0.001), but the expression level of miR-3666 decreased (0.23±0.02 vs. 1.01±0.10, P <0.001). The expression levels of LINC00839 and miR-3666 in liver cancer tissue were negatively correlated (r=-0.658, P <0.001). The survival rate of MHCC97H cells in the si-LINC00839 group [(53.91±5.41)% vs. (100.53±10.22)%], the number of clones formed (92.0±8.0 vs. 164.0±14.3), the number of migration (131.0±12.7 vs. 247.0±22.4), the number of invasion (66.0±6.4 vs. 120.0±11.6) and the protein level of MMP-2 (0.20±0.02 vs. 0.67±0.06) were lower than those in the si-NC group ( P <0.001). However, the protein levels of p21 (0.76±0.07 vs. 0.25±0.02) and E-cadherin (0.78±0.08 vs. 0.14±0.01) were higher than those in the si-NC group ( P <0.001). LINC00839 targeted and negatively regulated the expression of miR-3666. The survival rate of MHCC97-H cells in the miR-3666 group [(47.93±4.86)% vs. (100.11±10.21)%], the number of clone formation (78.0±7.7 vs. 166.0±15.9), the number of migration (117.0±12.1 vs. 250.0±25.0), the number of invasion (57.0±5.7 vs. 121.0±12.3) and the protein level of MMP-2 (0.16±0.01 vs. 0.69±0.07) were lower than those in the miR-NC group (all P <0.001). However, the protein levels of p21 (0.83±0.08 vs. 0.24±0.02) and E-cadherin (0.87±0.09 vs. 0.13±0.01)were higher than those in the miR-NC group (all P <0.001). The survival rate of MHCC97-H cells in the si-LINC00839+ anti-miR-3666 group [(89.94±9.05)% vs. (54.12±5.39)%], the number of clones (143.0±13.8 vs. 94.0±9.4), the number of migration (208.0±19.8 vs. 129.0±12.6), the number of invasion (108.0±10.1 vs. 65.0±6.4) and the protein level of MMP-2 (0.31±0.03 vs 0.66±0.06) were higher than those in the si-LINC00839+ anti-miR-NC group ( P <0.001). However, the protein levels of p21 (0.31±0.03 vs. 0.74±0.07) and E-cadherin (0.28±0.03 vs. 0.80±0.08) were lower than those int the si-LINC00839+ anti-miR-NC group ( P <0.001). Conclusion: Inhibition of LINC00839 expression may inhibit the proliferation, migration and invasion of hepatocellular carcinoma cells by targeting up-regulation of miR-3666 expression.

This study investigated the effects of tannic acid (TA)-treated corn on changes in ruminal fermentation characteristics and the composition of the ruminal bacterial community in vitro . Ruminal fluid was obtained from three rumen-fistulated goats fed a 60:40 (forage/concentrate) diet. The batch cultures consisted of 25 ml of strained rumen fluid in 25 ml of an anaerobic buffer containing 0.56 g of ground corn, 0.24 g of soybean meal, 0.10 g of alfalfa, and 0.10 g of oat grass. Ground corn (2 mm) was steeped in an equal quantity (i.e., in a ratio of 1:1, w / v ) of water alone (Con), 15 (TA15), 25 (TA25), and 35 g/l (TA35) TA solution for 12 h. After incubation for 24 h, TA-treated corn linearly increased ( P <0.05) ruminal pH and the molar proportion of acetate, but linearly reduced ( P <0.05) total volatile fatty acids and the molar proportion of butyrate compared with the Con treatment. Illumina MiSeq sequencing was used to investigate the profile changes of the ruminal microbes. A principal coordinates analysis plot based on weighted UniFrac values revealed that the structure of the ruminal bacterial communities in the control group was different from that of the TA-treated corn groups. The results of changes in the rumen bacterial communities showed that TA-treated corn linearly enriched ( P <0.05) Rikenellaceae&#95;RC9&#95;gut&#95;group , but linearly reduced ( P <0.05) Ruminococcaceae&#95;NK4A214&#95;group, Ruminococcus&#95;2 , and unclassified&#95;o&#95;&#95;Clostridiales . Functional prediction of ruminal microbiota revealed that the TA-treated corn linearly decreased ruminal microbiota function of utilizing starch through pyruvate metabolism. In conclusion, TA-treated corn can modulate the rumen fermentation characteristics, microbial composition, and metabolic pathways, which may be potentially useful for preventing the occurrence of ruminal acidosis., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Zhao, Zhang, Zhang, Elmhadi, Qin, Sun, Zhang, Wang and Wang.)

Some grain processing by-products rich in digestible fiber are good feed resources for ruminants. This experiment was conducted to investigate the effects of replacing a portion of corn and corn stover with the combinations of corn bran and soybean hulls in the diet of fattening lambs on nutrient digestion, rumen microbial protein synthesis, and growth performance. A total of 36 Dorper × Small Thin-Tailed crossbred ram lambs (BW = 22.2 ± 0.92 kg; mean ± SD) were randomly divided into three groups, and each group was fed 1 of 3 treatment diets: 1) 0% corn bran and soybean hulls (control); 2) 9% corn bran and 9% soybean hulls (18MIX); and 3) 17% corn bran and 17% soybean hulls (34MIX). The feeding experiment was conducted for 70 days, with the first 10 days for adaption. The DM intake was higher for 34MIX (1635.3 g/d) than for control diet (1434.7 g/d; P = 0.001). Lambs fed 18MIX and 34MIX diets (230.2 and 263.6 g/d, respectively) had higher average daily gain and feed efficiency than those fed control diet (194.8 g/d; P < 0.01). Dry matter and NDF digestibility for 34MIX group (60.9 and 49.5%) were higher than for control (55.2 and 41.3%; P < 0.01). No difference was observed in nitrogen digestibility among treatment diets (P = 0.778). The lambs fed 34MIX diet excreted more urinary purine derivatives, indicating that more microbial protein was yielded than those fed control diet (P < 0.01), while 18MIX was not different from the other two diets (P > 0.05). The metabolizable protein supplies were improved with increasing co-products inclusion rate. The results indicated that corn bran and soybean hulls in combination can effectively replace a portion of corn and corn stover in the ration of finishing lambs with positive effect on nutrient digestion and growth performance., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)