Search

High quality opal‐like photonic crystals containing graphene are fabricated using evaporation‐driven self‐assembly of soft polymer colloids. A miniscule amount of pristine graphene within a colloidal crystal lattice results in the formation of colloidal crystals with a strong angle‐dependent structural color and a stop band that can be reversibly shifted across the visible spectrum. The crystals can be mechanically deformed or can reversibly change color as a function of their temperature, hence their sensitive mechanochromic and thermochromic response make them attractive candidates for a wide range of visual sensing applications. In particular, it is shown that the crystals are excellent candidates for visual strain sensors or integrated time‐temperature indicators which act over large temperature windows. Given the versatility of these crystals, this method represents a simple, inexpensive, and scalable approach to produce multifunctional graphene infused synthetic opals and opens up exciting applications for novel solution‐processable nanomaterial based photonics. [ABSTRACT FROM AUTHOR]

Two‐dimensional (2D) molybdenum disulfide (MoS2) holds great promise in electronic and optoelectronic applications owing to its unique structure and intriguing properties. The intrinsic defects such as sulfur vacancies (SVs) of MoS2 nanosheets are found to be detrimental to the device efficiency. To mitigate this problem, functionalization of 2D MoS2 using thiols has emerged as one of the key strategies for engineering defects. Herein, we demonstrate an approach to controllably engineer the SVs of chemically exfoliated MoS2 nanosheets using a series of substituted thiophenols in solution. The degree of functionalization can be tuned by varying the electron‐withdrawing strength of substituents in thiophenols. We find that the intensity of 2LA(M) peak normalized to A1g peak strongly correlates to the degree of functionalization. Our results provide a spectroscopic indicator to monitor and quantify the defect engineering process. This method of MoS2 defect functionalization in solution also benefits the further exploration of defect‐free MoS2 for a wide range of applications. [ABSTRACT FROM AUTHOR]

New luminogens for aggregation‐induced emission (AIE), which are characterized by a branched cross‐conjugated 2,6‐bis(1,2,2‐triarylvinyl)pyridine motif, have been synthesized exploiting the one‐pot Ti‐mediated tetraarylation of 2,6‐bis(arylethynyl)pyridines. Thin layer solid‐state emitters were prepared by spin‐coating of the luminogens, while AIE‐colloidal dispersions were investigated in terms of optical density and scattering behaviour. This has given insight into particle size distributions, time evolution of the aggregation and the influence of different functionalization patterns on the luminescence of molecular aggregates. In particular, a combination of extinction spectroscopy and dynamic light scattering is being proposed as a powerful method for investigating the dynamic aggregation process in AIE‐type colloids. [ABSTRACT FROM AUTHOR]

2D polymer sheets with six positively charged pyrylium groups at each pore edge in a stacked single crystal can be transformed into a 2D polymer with six pyridines per pore by exposure to gaseous ammonia. This reaction furnishes still a crystalline material with tunable protonation degree at regular nano‐sized pores promising as separation membrane. The exfoliation is compared for both 2D polymers with the latter being superior. Its liquid phase exfoliation yields nanosheet dispersions, which can be size‐selected using centrifugation cascades. Monolayer contents of ≈30 % are achieved with ≈130 nm sized sheets in mg quantities, corresponding to tens of trillions of monolayers. Quantification of nanosheet sizes, layer number and mass shows that this exfoliation is comparable to graphite. Thus, we expect that recent advances in exfoliation of graphite or inorganic crystals (e.g. scale‐up, printing etc.) can be directly applied to this 2D polymer as well as to covalent organic frameworks. [ABSTRACT FROM AUTHOR]

Liquid phase exfoliation (LPE) has been used for the successful fabrication of nanosheets from a large number of van der Waals materials. While this allows to study fundamental changes of material properties' associated with reduced dimensions, it also changes the chemistry of many materials due to a significant increase of the effective surface area, often accompanied with enhanced reactivity and accelerated oxidation. To prevent material decomposition, LPE and processing in inert atmosphere have been developed, which enables the preparation of pristine nanomaterials, and to systematically study compositional changes over time for different storage conditions. Here, we demonstrate the inert exfoliation of the oxidation-sensitive van der Waals crystal, CrTe 3. The pristine nanomaterial was purified and size-selected by centrifugation, nanosheet dimensions in the fractions quantified by atomic force microscopy and studied by Raman, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX) and photo spectroscopic measurements. We find a dependence of the relative intensities of the CrTe 3 Raman modes on the propagation direction of the incident light, which prevents a correlation of the Raman spectral profile to the nanosheet dimensions. XPS and EDX reveal that the contribution of surface oxides to the spectra is reduced after exfoliation compared to the bulk material. Further, the decomposition mechanism of the nanosheets was studied by time-dependent extinction measurements after water titration experiments to initially dry solvents, which suggest that water plays a significant role in the material decomposition. [ABSTRACT FROM AUTHOR]

Despite its widespread use in nanocomposites, the effect of embedding graphene in highly viscoelastic polymer matrices is not well understood. We added graphene to a lightly cross-linked polysilicone, often encountered as Silly Putty, changing its electromechanical properties substantially. The resulting nanocomposites display unusual electromechanical behavior, such as postdeformation temporal relaxation of electrical resistance and nonmonotonic changes in resistivity with strain. These phenomena are associated with the mobility of the nanosheets in the low-viscosity polymer matrix. By considering both the connectivity and mobility of the nanosheets, we developed a quantitative model that completely describes the electromechanical properties. These nanocomposites are sensitive electromechanical sensors with gauge factors >500 that can measure pulse, blood pressure, and even the impact associated with the footsteps of a small spider. [ABSTRACT FROM AUTHOR]

Single-wall carbon nanotubes (SWNTs) are emerging as materials with much potential in several disciplines, in particular in electronics and photovoltaics. The combination of SWNTs with electron donors or acceptors generates active materials, which can produce electrical energy when irradiated. However, SWNTs are very elusive species when characterization of their metastable states is required. This problem mainly arises because of the polydispersive nature of SWNT samples and the inevitable presence of SWNTs in bundles of different sizes. Here, we report the complete and thorough characterization of an SWNT radical ion-pair state induced by complexation with a perylene dye, which combines excellent electron-accepting and -conducting features with a five-fused ring π-system. At the same time, the perylene dye enables the dispersion of SWNTs by means of π-π interactions, which gives individual SWNTs in solution. This work clears a path towards electronic and optoelectronic devices in which regulated electrical transport properties are important. [ABSTRACT FROM AUTHOR]

• A method for aligning the amorphous polymer polyindenofluoren‑8‑triarylamine via inkjet printing is presented. • Fiber-like structures with varying morphology can be fabricated resulting in anisotropic optical properties. • Optical anisotropy is dependent on fiber size and alignment and is caused by their increased molecular arrangement. The molecular arrangement of polymeric organic semiconductors alter the macroscopic optoelectronic properties of the material. Most existing solution-based deposition methods are however, limited in both resolution as well as pattern design and often result in molecular disorder upon drying. Here, a method for aligning the amorphous polymer polyindenofluoren-8-triarylamine (PIF8-TAA) via inkjet printing is presented. By tuning the printing speed and including different amounts of the solid solvent crystallization agent 1,3,5-trichlorobenzene (TCB), fibrous structures with varying morphology can be fabricated. The resulting optical properties are analyzed using photoluminescence and Raman spectroscopy. The findings show an optical anisotropic behavior dependent on the fiber size and alignment. This is likely caused by the increased molecular arrangement within the structures. Methods enabling tailored structuring of the molecular arrangement in a material, provide the possibility to develop novel applications, as well as to optimize existing devices with improved properties such as, charge carrier transport and emission efficiency. [ABSTRACT FROM AUTHOR]

Cover Feature: Defect Engineering of Two-Dimensional Molybdenum Disulfide (Chem. Eur. J. 29/2020) Keywords: 2D materials; defect engineering; functionalization; MoS2; thiophenol EN 2D materials defect engineering functionalization MoS2 thiophenol 6290 6290 1 05/23/20 20200520 NES 200520 B An approach to controllably engineer the sulfur vacancies b of chemically-exfoliated MoS SB 2 sb nanosheets using a series of substituted thiophenols in solution was demonstrated in this work. 2D materials, defect engineering, functionalization, MoS2, thiophenol. [Extracted from the article]

Keywords: aggregation-induced emission; extinction spectroscopy; one-pot tetraarylation; scattering exponent; titanium tetraisopropoxide EN aggregation-induced emission extinction spectroscopy one-pot tetraarylation scattering exponent titanium tetraisopropoxide 4165 4165 1 04/03/20 20200401 NES 200401 B New luminogens for aggregation-induced emission (AIE) and viscocromicity b containing a branched cross-conjugated 2,6-bis(1,2,2-triarylvinyl)pyridine structural motif have been synthesized by one-pot Ti-mediated tetraarylation of 2,6-bis(arylethynyl)pyridines. A combination of extinction spectroscopy and dynamic light scattering has given insight into particle size distributions of the AIE-colloidal dispersions as well as the time evolution of the aggregation. A combination of extinction spectroscopy and dynamic light scattering has given insight into particle size distributions of the AIE-colloidal dispersions as well as the time evolution of the aggregation. [Extracted from the article]

Antiferromagnets are promising materials for future opto-spintronic applications since they show spin dynamics in the THz range and no net magnetization. Recently, layered van der Waals (vdW) antiferromagnets have been reported, which combine low-dimensional excitonic properties with complex spin-structure. While various methods for the fabrication of vdW 2D crystals exist, formation of large area and continuous thin films is challenging because of either limited scalability, synthetic complexity, or low opto-spintronic quality of the final material. Here, we fabricate centimeter-scale thin films of the van der Waals 2D antiferromagnetic material NiPS 3 , which we prepare using a crystal ink made from liquid phase exfoliation (LPE). We perform statistical atomic force microscopy (AFM) and scanning electron microscopy (SEM) to characterize and control the lateral size and number of layers through this ink-based fabrication. Using ultrafast optical spectroscopy at cryogenic temperatures, we resolve the dynamics of photoexcited excitons. We find antiferromagnetic spin arrangement and spin-entangled Zhang-Rice multiplet excitons with lifetimes in the nanosecond range, as well as ultranarrow emission line widths, despite the disordered nature of our films. Thus, our findings demonstrate scalable thin-film fabrication of high-quality NiPS 3 , which is crucial for translating this 2D antiferromagnetic material into spintronic and nanoscale memory devices and further exploring its complex spin-light coupled states.

Monolayer transition metal dichalcogenides (TMDs) are being investigated as active materials in optoelectronic devices due to their strong excitonic effects. While mechanical exfoliation (ME) of monolayer TMDs is limited to small areas, these materials can also be exfoliated from their parent layered materials via high-volume liquid phase exfoliation (LPE). However, it is currently considered that LPE-synthesized materials show poor optoelectronic performance compared to ME materials, such as poor photoluminescence quantum efficiencies (PLQEs). Here we evaluate the photophysical properties of monolayer-enriched LPE WS 2 dispersions via steady-state and time-resolved optical spectroscopy and benchmark these materials against untreated and chemically treated ME WS 2 monolayers. We show that the LPE materials show features of high-quality semiconducting materials such as very small Stokes shift, smaller photoluminescence line widths, and longer exciton lifetimes than ME WS 2 . We reveal that the energy transfer between the direct-gap monolayers and in-direct gap few-layers in LPE WS 2 dispersions is a major reason for their quenched PL. Our results suggest that LPE TMDs are not inherently highly defective and could have a high potential for optoelectronic device applications if improved strategies to purify the LPE materials and reduce aggregation could be implemented., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Sonication-assisted liquid phase exfoliation was applied to six different layered coordination polymers (CPs) in aqueous surfactant solution. The resulting nanosheets were investigated for structural and compositional integrity and microscopic analysis gives insights into the relationship between the crystal structure of the materials and their exfoliability. Larger open pores seem to favour the production of nanosheets with higher aspect ratio of lateral size to thickness.

We present a method to anneal devices based on graphite films on paper and polycarbonate substrates. The devices are created using four different methods: spray-on films, graphite pencil-drawn films, liquid-phase exfoliated graphite films, and graphite powder abrasion-applied films. We characterize the optical properties of the films before and after laser annealing and report the two-terminal resistance of the devices for increased laser power density. We find the greatest improvement (16× reduction) in the resistance of spray-on film devices starting from 25.0 kΩ and reaching 1.6 kΩ at the highest annealing power densities. These improvements are attributed to local laser ablation of binders, stabilizers, and solvent residues left in the film after fabrication. This work highlights the utility of focused laser annealing for spray-on, drawn, printed, and abrasion fabricated films on substrates sensitive to heat/thermal treatments., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

Liquid phase exfoliation (LPE) is a popular method to create dispersions of two-dimensional nanosheets from layered inorganic van der Waals crystals. Here, it is applied to orthorhombic and triclinic single crystals of the organic semiconductor rubrene with only noncovalent interactions (mainly π-π) between the molecules. Distinct nanorods and nanobelts of rubrene are formed, stabilized against aggregation in aqueous sodium cholate solution, and isolated by liquid cascade centrifugation. Selected-area electron diffraction and Raman spectroscopy confirm the crystallinity of the rubrene nanorods and nanobelts while the optical properties (absorbance, photoluminescence) of the dispersions are similar to rubrene solutions due to their randomized orientations. The formation of these stable crystalline rubrene nanostructures with only a few molecular layers by LPE confirms that noncovalent interactions in molecular crystals can be strong enough to enable mechanical exfoliation similar to inorganic layered materials.

We report on the investigation of thermal transport in noncured silicone composites with graphene fillers of different lateral dimensions. Graphene fillers are comprised of few-layer graphene flakes with lateral sizes in the range from 400 to 1200 nm and the number of atomic planes from 1 to ∼100. The distribution of the lateral dimensions and thicknesses of graphene fillers has been determined via atomic force microscopy statistics. It was found that in the examined range of the lateral dimensions, the thermal conductivity of the composites increases with increasing size of the graphene fillers. The observed difference in thermal properties can be related to the average gray phonon mean free path in graphene, which has been estimated to be around ∼800 nm at room temperature. The thermal contact resistance of composites with graphene fillers of 1200 nm lateral dimensions was also smaller than that of composites with graphene fillers of 400 nm lateral dimensions. The effects of the filler loading fraction and the filler size on the thermal conductivity of the composites were rationalized within the Kanari model. The obtained results are important for the optimization of graphene fillers for applications in thermal interface materials for heat removal from high-power-density electronics.

Group VI transition metal dichalcogenides (TMDs) are considered to be chemically widely inert, but recent reports point toward an oxidation of monolayered sheets in ambient conditions, due to defects. To date, the degradation of monolayered TMDs is only studied on individual, substrate-supported nanosheets with varying defect type and concentration, strain, and in an inhomogeneous environment. Here, degradation kinetics of WS 2 nanosheet ensembles in the liquid phase are investigated through photoluminescence measurements, which selectively probe the monolayers. Monolayer-enriched WS 2 dispersions are produced with varying lateral sizes in the two common surfactant stabilizers sodium cholate (SC) and sodium dodecyl sulfate (SDS). Well-defined degradation kinetics are observed, which enable the determination of activation energies of the degradation and decouple photoinduced and thermal degradation. The thermal degradation is slower than the photoinduced degradation and requires higher activation energy. Using SC as surfactant, it is sufficiently suppressed. The photoinduced degradation can be widely prevented through chemical passivation achieved through the addition of cysteine which, on the one hand, coordinates to defects on the nanosheets and, on the other hand, stabilizes oxides on the surface, which shield the nanosheets from further degradation., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Over the past 15 years, two-dimensional (2D) materials have been studied and exploited for many applications. In many cases, 2D materials are formed by the exfoliation of layered crystals such as transition-metal disulfides. However, it has recently become clear that it is possible to exfoliate nonlayered materials so long as they have a nonisotropic bonding arrangement. Here, we report the synthesis of 2D-platelets from the earth-abundant, nonlayered metal sulfide, iron pyrite (FeS 2 ), using liquid-phase exfoliation. The resultant 2D platelets exhibit the same crystal structure as bulk pyrite but are surface passivated with a density of 14 × 10 18 groups/m 2 . They form stable suspensions in common solvents and can be size-selected and liquid processed. Although the platelets have relatively low aspect ratios (∼5), this is in line with the anisotropic cleavage energy of bulk FeS 2 . We observe size-dependent changes to optical properties leading to spectroscopic metrics that can be used to estimate the dimensions of platelets. These platelets can be used to produce lithium ion battery anodes with capacities approaching 1000 mAh/g.

Liquid- phase exfoliation (LPE) is the principal method of producing two-dimensional (2D) materials such as graphene in large quantities with a good balance between quality and cost and is now widely adopted by both the academic and industrial sectors. The fragmentation and exfoliation mechanisms involved have usually been simply attributed to the force induced by ultrasound and the interaction with the solvent molecules. Nonetheless, little is known about how they actually occur, i.e. , how thick and large graphite crystals can be exfoliated into thin and small graphene flakes. Here, we demonstrate that during ultrasonic LPE the transition from graphite flakes to graphene takes place in three distinct stages. First, sonication leads to the rupture of large flakes and the formation of kink band striations on the flake surfaces, primarily along zigzag directions. Second, cracks form along these striations, and together with intercalation of solvent, lead to the unzipping and peeling off of thin graphite strips that in the final stage are exfoliated into graphene. The findings will be of great value in the quest to optimize the lateral dimensions, thickness, and yield of graphene and other 2D materials in large-scale LPE for various applications.

A new layered mesoporous Zr-MOF of composition [Zr 30 O 20 (OH) 26 (OAc) 18 L 18 ] was synthesized by employing 5-acetamidoisophthalic acid (H 2 L) using acetic acid as the solvent. The new MOF, denoted as CAU-45, exhibits a honeycomb structure of stacked layers which comprise both hexa- and dodecanucelar zirconium clusters. Its structure was solved from submicrometer-sized crystals by continuous rotation electron diffraction (cRED). Liquid phase exfoliation and size selection were successfully performed on the material.

In recent years, various functionalization strategies for transition-metal dichalcogenides have been explored to tailor the properties of materials and to provide anchor points for the fabrication of hybrid structures. Herein, new insights into the role of the surfactant in functionalization reactions are described. Using the spontaneous reaction of WS 2 with chloroauric acid as a model reaction, the regioselective formation of gold nanoparticles on WS 2 is shown to be heavily dependent on the surfactant employed. A simple model is developed to explain the role of the chosen surfactant in this heterogeneous functionalization reaction. The surfactant coverage is identified as the crucial element that governs the dominant reaction pathway and therefore can severely alter the reaction outcome. This study shows the general importance of the surfactant choice and how detrimental or beneficial a certain surfactant can be to the desired functionalization., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Invited for the cover of this issue are Lutz H. Gade, Claudia Backes, and co-workers at Heidelberg University. The image depicts 2-(1,2,2-triarylvinyl)-pyridines, which are luminogens for aggregation-induced emission which "light up" upon irradiation. Read the full text of the article at 10.1002/chem.201905611., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Layered materials are an abundant source of new nanostructures when thinned down to display fascinating layer number-dependent properties due to quantum confinement in two dimensions. About ten years ago, it was first demonstrated that layered crystals can be exfoliated down to monolayers in the liquid phase by a relatively simple and scalable methodology termed liquid-phase exfoliation that is widely applicable to many structures. By now, >10 classes of layered materials have been made accessible as two-dimensional nanosheets by this technique. In this article, advancements in exfoliation, size selection and characterisation are summarised. Remaining challenges, open questions and perspectives are also discussed., (Copyright 2019 Swiss Chemical Society. License: This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.)

Titanium disulfide is a promising material for a range of applications, including lithium-ion battery (LIB) anodes. However, its application potential has been severely hindered by the tendency of exfoliated TiS2 to rapidly oxidize under ambient conditions. Herein, we confirm that, although layered TiS2 powder can be exfoliated by sonication in aqueous surfactant solutions, the resultant nanosheets oxidise almost completely within hours. However, we find that upon performing the exfoliation in the solvent cyclohexyl-pyrrolidone (CHP), the oxidation is almost completely suppressed. TiS2 nanosheets dispersed in CHP and stored at 4 °C in an open atmosphere for 90 days remained up to 95% intact. In addition, CHP-exfoliated nanosheets did not show any evidence of oxidation for at least 30 days after being transformed into dry films even when stored under ambient conditions. This stability, probably a result of a residual CHP coating, allows TiS2 nanosheets to be deployed in applications. To demonstrate this, we prepared lithium ion battery anodes from nano : nano composites of TiS2 nanosheets mixed with carbon nanotubes. These anodes displayed reversible capacities (920 mA h g-1) close to the theoretical value and showed good rate performance and cycling capability.

While 2D transition metal dichalcogenides are known to be promising materials for electrocatalysis of hydrogen production, it is not clear which member of this family of materials is the most effective catalyst. Here we perform a comprehensive study, comparing the catalytic performance of electrodes consisting of porous arrays of liquid exfoliated MX2 nanosheets (M = Mo, W; X = S, Se, Te). We find a clear hierarchy with selenides > sulphides > tellurides with MoSe2 clearly out-performing the other materials. In all cases the performance, as characterised by current density at a given potential, can be improved by increasing the number of active sites (via control of the electrode thickness) and/or by adding carbon nanotubes to the electrode (i.e. increasing the electrode conductivity). While all materials formed reasonably stable electrodes, addition of nanotubes tended to improve mechanical cohesion. In an attempt to maximise performance, we prepared thick (∼15 μm), free standing MoSe2/SWNT composite electrodes which displayed Tafel slopes of ∼77 mV per decade and exchange current densities of ∼0.1 mA cm(-2). These electrodes had low onset potentials, reaching -2 mA cm(-2) at -41 mV (vs. RHE) and generated high current densities of -35 mA cm(-2) at -200 mV (vs. RHE).

Layered two-dimensional (2D) inorganic transition-metal dichalchogenides (TMDs) have attracted great interest as a result of their potential application in optoelectronics, catalysis, and medicine. However, methods to functionalize and process such 2D TMDs remain scarce. We have established a facile route towards functionalized layered MoS2 . We found that the reaction of liquid-exfoliated 2D MoS2 , with M(OAc)2 salts (M=Ni, Cu, Zn; OAc=acetate) yielded functionalized MoS2 -M(OAc)2 materials. Importantly, this method furnished the 2H-polytype of MoS2 which is a semiconductor. X-ray photoelectron spectroscopy (XPS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFT-IR), and thermogravimetric analysis (TGA) provide strong evidence for the coordination of MoS2 surface sulfur atoms to the M(OAc)2 salt. Interestingly, functionalization of 2H-MoS2 allows for its dispersion/processing in more conventional laboratory solvents., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The solubilization of single-walled carbon nanotubes (SWCNTs) by a novel tweezer-shaped molecule with perylene bisimide moieties that act as aromatic anchoring groups is presented. Encouraging results of the tweezer-dispersion concept is combined with the outstanding exfoliation and dispersion efficiencies of designed perylene bisimide derivatives, which have previously turned out as most-powerful SWCNT dispersants. Based on the preferred interaction between the nanotweezer and SWCNTs with diameters larger than 0.8 nm, the supernatant was depleted after mild centrifugation in SWCNT species of smaller diameters. Characterization was carried out by a combination of UV/Vis and nIR absorption spectroscopy as well as emission spectroscopy of the SWCNTs and perylene. This study presents the foundation for a further improvement of selective SWCNT dispersion and sorting by designed molecules., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We present evidence from multiple characterization methods, such as emission spectroscopy, zeta potential, and analytical ultracentrifugation, to shed light on the adsorption behavior of synthesized perylene surfactants on single-walled carbon nanotubes (SWCNTs). On comparing dispersions of smaller-diameter SWCNTs prepared by using cobalt-molybdenum catalysis (CoMoCAT) with the larger-diameter SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco), we find that the CoMoCAT-perylene surfactant dispersions are characterized by more negative zeta potentials, and higher anhydrous specific volumes (the latter determined from the sedimentation coefficients by analytical ultracentrifugation), which indicates an increased packing density of the perylene surfactants on nanotubes of smaller diameter. This conclusion is further supported by the subsequent replacement of the perylene derivatives from the nanotube sidewall by sodium dodecyl benzene sulfonate (SDBS), which first occurs on the larger-diameter nanotubes. The enhanced adsorption affinity of the perylene surfactants towards smaller-diameter SWCNTs can be understood in terms of a change in the supramolecular arrangement of the perylene derivatives on the scaffold of the SWCNTs. These findings represent a significant step forward in understanding the noncovalent interaction of π-surfactants with carbon nanotubes, which will enable the design of novel surfactants with enhanced selectivity for certain nanotube species.

We report on the extensive characterization of single-walled carbon nanotubes (SWCNTs) dispersed in a variety of surfactants, such as sodium dodecyl benzene sulfonate (SDBS), sodium cholate (SC), and three synthesized perylene-based surfactants, by using differential sedimentation in H(2)O and D(2)O. Multidimensional evaluation of the absorption profiles over radius, wavelength, and time allows the determination of the anhydrous specific volumes of the SWCNT-surfactant complexes as well as the concentration of the surfactant reservoir in free micelles with very slow sedimentation coefficients (<1 Svedberg). Among the perylene bisimide surfactants, the smallest derivative is densely adsorbed on the nanotube backbone with an anhydrous specific volume significantly above that of SC or SDBS. Bulky Newkome dendritic groups on one or both ends of the perylene moiety gradually reduce the adsorption density, in accord with the absolute adsorption between 0.66 and 1.7 mmol surfactant per gram SWCNTs. Furthermore, hydrodynamic analysis reveals that SDBS favors the "tails-on" configuration. The distribution of sedimentation coefficients of SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco) is broader and shifted to faster sedimentation than those prepared by using cobalt-molybdenum catalysis (CoMoCAT), which reflects the polydispersity in diameter and length.