Search

Significance: The polarimetric properties of biological tissues are often difficult to ascertain independent of their complex structural and organizational features. Conventional polarimetric tissue phantoms have well-characterized optical properties but are overly simplified. We demonstrate that an innovative, biologically sourced, engineered tissue construct better recapitulates the desired structural and polarimetric properties of native collagenous tissues, with the added benefit of potential tunability of the polarimetric response. We bridge the gap between non-biological polarimetric phantoms and native tissues., Aim: We aim to evaluate a synthesized tissue construct for its effectiveness as a phantom that mimics the polarimetric properties in typical collagenous tissues., Approach: We use a fibroblast-derived, ring-shaped engineered tissue construct as an innovative tissue phantom for polarimetric imaging. We perform polarimetry measurements and subsequent analysis using the Mueller matrix decomposition and Mueller matrix transformation methods. Scalar polarimetric parameters of the engineered tissue are analyzed at different time points for both a control group and for those treated with the transforming growth factor ( TGF ) - β 1 . Second-harmonic generation (SHG) imaging and three-dimensional collagen fiber organization analysis are also applied., Results: We identify linear retardance and circular depolarization as the parameters that are most sensitive to the tissue culture time and the addition of TGF - β 1 . Aside from a statistically significant increase over time, the behavior of linear retardance and circular depolarization indicates that the addition of TGF - β 1 accelerates the growth of the engineered tissue, which is consistent with expectations. We also find through SHG images that collagen fiber organization becomes more aligned over time but is not susceptible to the addition of TGF - β 1 ., Conclusions: The engineered tissue construct exhibits changes in polarimetric properties, especially linear retardance and circular depolarization, over culture time and under TGF - β 1 treatments. This tissue construct has the potential to act as a controlled modular optical phantom for polarimetric-based methods., (© 2024 The Authors.)

This study presents an innovative bi-layered three-dimensional skin-like nanopad (SLN) engineered for skin tissue regeneration. The SLN integrates a mechanically supportive polycaprolactone nanofibrous layer with a functional chitosan hydrogel film, mimicking natural skin. Our SLN exhibits superior flexibility, with a maximum elongation of 751.71 ± 125 % and exceptional porosity of 95 ± 4.5 %, ensuring effective exudate management due to its high water uptake capacity (4393 ± 72 %). FTIR analysis confirmed a distinctive fiber-hydrogel network within the SLN, which serves as a barrier against Staphylococcus aureus and Pseudomonas aeruginosa infiltration. In vitro cell viability assays with the human fibroblast have consistently demonstrated that 3D bi-layered SLN enhances fibroblast attachment, infiltration, and proliferation by 150 ± 20 %. In vivo studies in a rat model demonstrated significantly faster wound closure, with 60 % on day 7 and 87 % on day 10, compared to the 30 % and 60 % in controls, highlighting the efficacy of SLN. By mimicking the architecture of native skin, this biomimetic bi-layered SLN scaffold provides flexibility and support while accelerating in vivo wound closure by promoting fibroblast proliferation and infiltration. Customizable in size, depth, and shape, the engineered SLN has emerged as a promising platform for advanced wound care and tissue engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Since March 2013, animal testing for toxicity evaluation of cosmetic ingredients is banned in Europe. This directive applies to all personal care ingredients including oral ingredients. Gingival in vitro 3D models are commercially available. However, it is essential to develop "in house model" to modulate several parameters to study oral diseases, determine the toxicity of ingredients, test biocompatibility, and evaluate different formulations of cosmetic ingredients. Our expertise in tissue engineering allowed us to reconstruct human oral tissues from normal human gingival cells (fibroblasts and keratinocytes). Indeed, isolation from surgical leftover was performed to culture these gingival cells. These cells keep their endogenous capacity to proliferate allowing reconstruction of equivalent tissue close to in vivo tissue. Reconstruction of gingival epithelium, chorion equivalent, and the combination of these two tissues (full thickness) using primary gingival cells displayed all characteristics of an in vivo gingival model., (© 2024. The Society for In Vitro Biology.)

Hierarchical collagen fibers are the primary source of strength in tendons and ligaments; however, these fibers largely do not regenerate after injury or with repair, resulting in limited treatment options. We previously developed a static culture system that guides ACL fibroblasts to produce native-sized fibers and early fascicles by 6 weeks. These constructs are promising ligament replacements, but further maturation is needed. Mechanical cues are critical for development in vivo and in engineered tissues; however, the effect on larger fiber and fascicle formation is largely unknown. Our objective was to investigate whether intermittent cyclic stretch, mimicking rapid muscle activity, drives further maturation in our system to create stronger engineered replacements and to explore whether cyclic loading has differential effects on cells at different degrees of collagen organization to better inform engineered tissue maturation protocols. Constructs were loaded with an established intermittent cyclic loading regime at 5 or 10 % strain for up to 6 weeks and compared to static controls. Cyclic loading drove cells to increase hierarchical collagen organization, collagen crimp, and tissue tensile properties, ultimately producing constructs that matched or exceeded immature ACL properties. Further, the effect of loading on cells varied depending on degree of organization. Specifically, 10 % load drove early improvements in tensile properties and composition, while 5 % load was more beneficial later in culture, suggesting a shift in mechanotransduction. This study provides new insight into how cyclic loading affects cell-driven hierarchical fiber formation and maturation, which will help to develop better rehabilitation protocols and engineer stronger replacements. STATEMENT OF SIGNIFICANCE: Collagen fibers are the primary source of strength and function in tendons and ligaments throughout the body. These fibers have limited regenerate after injury, with repair, and in engineered replacements, reducing treatment options. Cyclic load has been shown to improve fibril level alignment, but its effect at the larger fiber and fascicle length-scale is largely unknown. Here, we demonstrate intermittent cyclic loading increases cell-driven hierarchical fiber formation and tissue mechanics, producing engineered replacements with similar organization and mechanics as immature ACLs. This study provides new insight into how cyclic loading affects cell-driven fiber maturation. A better understanding of how mechanical cues regulate fiber formation will help to develop better engineered replacements and rehabilitation protocols to drive repair after injury., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

An injectable hydrogel formulation is developed utilizing low- and high-molecular-weight chitosan (LCH and HCH) incorporated with curcumin and α-tocopherol-loaded liposomes (Lip/Cur+Toc). Cur and Toc releases are delayed within the hydrogels. The injectability of hydrogels is proved via rheological analyses. In vitro studies are conducted using human dental pulp stem cells (hDPSCs) and human gingival fibroblasts (hGFs) to examine the biological performance of the hydrogels toward endodontics and periodontics, respectively. The viability of hDPSCs treated with the hydrogels with Lip/Cur+Toc is the highest till day 14, compared to the neat hydrogels. During odontogenic differentiation tests, alkaline phosphatase (ALP) enzyme activity of hDPSCs is induced in the Cur-containing groups. Biomineralization is enhanced mostly with Lip/Cur+Toc incorporation. The viability of hGFs is the highest in HCH combined with Lip/Cur+Toc while wound healing occurs almost 100% in both (Lip/Cur+Toc@LCH and Lip/Cur+Toc@HCH) after 2 days. Antioxidant activity of Lip/Cur+Toc@LCH on hGFs is significantly the highest among the groups. Antimicrobial tests demonstrate that Lip/Cur+Toc@LCH is more effective against Escherichia coli whereas so is Lip/Cur+Toc@HCH against Staphylococcus aureus. The antimicrobial mechanism of the hydrogels is investigated for the first time through various computational models. LCH and HCH loaded with Lip/Cur+Toc are promising candidates with multi-functional features for endodontics and periodontics., (© 2024 The Author(s). Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

In this study, we report on the preparation, characterization, and cytocompatibility of hydrogels for biomedical applications made from two different molecular weights of chitosan (CS) blended with poly(vinyl alcohol) (PVA) and chemically cross-linked with tetraethyl orthosilicate (TEOS) followed by freeze-drying. A series of CS-PVA hydrogels were synthesized with different amounts of chitosan (1%, 2%, and 3% by weight). The structure of these CS-PVA hydrogels was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The hydrogel samples were also characterized for tensile strength, contact angle, swelling behavior, and degradation at physiological body temperature. Their physicochemical properties, biocompatibility, and cell viability when cultured with human dermal fibroblasts were assessed using alamarBlue and live/dead assays and compared to optimize their functionality. SEM analysis showed that the concentration and molecular weight of the chitosan component affected the pore size. Furthermore, the contact angle decreased with increasing chitosan content, indicating that chitosan increased its hydrophilic properties. The in vitro degradation study revealed a nonlinear time-dependent relationship between chitosan concentration or molecular weight, and the rate of degradation was affected by the pore size of the hydrogel. All of the CS-PVA hydrogels exhibited good cell proliferation, particularly with the high molecular weight chitosan samples.

Various strategies have extensively explored enhancing the physical and biological properties of chitosan and cellulose scaffolds for skin tissue engineering. This study presents a straightforward method involving the addition of glycerol into highly porous structures of two polysaccharide complexes: chitosan/carboxymethyl cellulose (Chit/CMC) and chitosan/oxidized cellulose (Chit/OC); during a one-step freeze-drying process. Adding glycerol, especially to Chit/CMC, significantly increased stability, prevented degradation, and improved mechanical strength by nearly 50%. Importantly, after 21 days of incubation in enzymatic medium Chit/CMC scaffold has almost completely decomposed, while foams reinforced with glycerol exhibited only 40% mass loss. It is possible due to differences in multivalent cations and polymer chain contraction, resulting in varied hydrogen bonding and, consequently, distinct physicochemical outcomes. Additionally, the scaffolds with glycerol improved the cellular activities resulting in over 40% higher proliferation of fibroblast after 21 days of incubation. It was achieved by imparting water resistance to the highly absorbent material and aiding in achieving a balance between hydrophilic and hydrophobic properties. This study clearly indicates the possible elimination of additional crosslinkers and multiple fabrication steps that can reduce the cost of scaffold production for skin tissue engineering applications while tailoring mechanical strength and degradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Synthetic Notch (synNotch) receptors are genetically encoded, modular synthetic receptors that enable mammalian cells to detect environmental signals and respond by activating user-prescribed transcriptional programs. Although some materials have been modified to present synNotch ligands with coarse spatial control, applications in tissue engineering generally require extracellular matrix (ECM)-derived scaffolds and/or finer spatial positioning of multiple ligands. Thus, we develop here a suite of materials that activate synNotch receptors for generalizable engineering of material-to-cell signaling. We genetically and chemically fuse functional synNotch ligands to ECM proteins and ECM-derived materials. We also generate tissues with microscale precision over four distinct reporter phenotypes by culturing cells with two orthogonal synNotch programs on surfaces microcontact-printed with two synNotch ligands. Finally, we showcase applications in tissue engineering by co-transdifferentiating fibroblasts into skeletal muscle or endothelial cell precursors in user-defined micropatterns. These technologies provide avenues for spatially controlling cellular phenotypes in mammalian tissues., (© 2024. The Author(s).)

The advent of three-dimensional (3D) bioprinting offers a feasible approach to construct complex structures for soft tissue regeneration. Carboxymethyl cellulose (CMC) has been emerging as a very promising biomaterial for 3D bioprinting. However, due to the inability to maintain the post-printed stability, CMC needs to be physically blended and/or chemically crosslinked with other polymers. In this context, this study presents the combination of CMC with xanthan gum (XG) and hyaluronic acid (HA) to formulate a multicomponent bioink, leveraging the printability of CMC and XG, as well as the cellular support properties of HA. The ionic crosslinking of printed constructs with iron(III) via the metal-ion coordination between ferric cations and carboxylate groups of the three polymers was introduced to induce improved mechanical strength and long-term stability. Moreover, immortalized human epidermal keratinocytes (HaCaT) and human foreskin fibroblasts (HFF) encapsulated within iron-crosslinked printed hydrogels exhibited excellent cell viability (more than 95%) and preserved morphology. Overall, the presented study highlights that the combination of these three biopolymers and the ionic crosslinking with ferric ions is a valuable strategy to be considered for the development of new and advanced hydrogel-based bioinks for soft tissue engineering applications.

Advanced in vitro models that recapitulate the structural organization and function of the human heart are highly needed for accurate disease modeling, more predictable drug screening, and safety pharmacology. Conventional 3D Engineered Heart Tissues (EHTs) lack heterotypic cell complexity and culture under flow, whereas microfluidic Heart-on-Chip (HoC) models in general lack the 3D configuration and accurate contractile readouts. In this study, an innovative and user-friendly HoC model is developed to overcome these limitations, by culturing human pluripotent stem cell (hPSC)-derived cardiomyocytes (CMs), endothelial (ECs)- and smooth muscle cells (SMCs), together with human cardiac fibroblasts (FBs), underflow, leading to self-organized miniaturized micro-EHTs (µEHTs) with a CM-EC interface reminiscent of the physiological capillary lining. µEHTs cultured under flow display enhanced contractile performance and conduction velocity. In addition, the presence of the EC layer altered drug responses in µEHT contraction. This observation suggests a potential barrier-like function of ECs, which may affect the availability of drugs to the CMs. These cardiac models with increased physiological complexity, will pave the way to screen for therapeutic targets and predict drug efficacy., (© 2024 The Authors. Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Cells assemble fibronectin, the major extracellular matrix (ECM) protein, into fibrillar matrices, which serve as 3D architectural scaffolds to provide, together with other ECM proteins tissue-specific environments. Although recent approaches enable to bioengineer 3D fibrillar fibronectin matrices in vitro, it remains elusive how fibronectin can be co-assembled with other ECM proteins into complex 3D fibrillar matrices that recapitulate tissue-specific compositions and cellular responses. Here, we introduce the engineering of fibrillar fibronectin-templated 3D matrices that can be complemented with other ECM proteins, including vitronectin, collagen, and laminin to resemble ECM architectures observed in vivo. For the co-assembly of different ECM proteins, we employed their innate fibrillogenic mechanisms including shear forces, pH-dependent electrostatic interactions, or specific binding domains. Through recapitulating various tissue-specific ECM compositions and morphologies, the large scale multi-composite 3D fibrillar ECM matrices can guide fibroblast adhesion, 3D fibroblast tissue formation, or tissue morphogenesis of epithelial cells. In other examples, we customize multi-composite 3D fibrillar matrices to support the growth of signal propagating neuronal networks and of human brain organoids. We envision that these 3D fibrillar ECM matrices can be tailored in scale and composition to modulate tissue-specific responses across various biological length scales and systems, and thus to advance manyfold studies of cell biological systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Electrospun microfibers, designed to emulate the extracellular matrix (ECM), play a crucial role in regulating the cellular microenvironment for tissue repair. Understanding their mechanical influence and inherent biological interactions at the ECM interface, however, remains a complex challenge. This study delves into the role of mechanical cues in tissue repair by fabricating Col/PLCL microfibers with varying chemical compositions and alignments that mimic the structure of the ECM. Furthermore, we optimized these microfibers to create the Col/PLCL@PDO aligned suture, with a specific emphasis on mechanical tension in tissue repair. The result reveals that within fibers of identical chemical composition, fibroblast proliferation is more pronounced in aligned fibers than in unaligned ones. Moreover, cells on aligned fibers exhibit an increased aspect ratio. In vivo experiments demonstrated that as the tension increased to a certain level, cell proliferation augmented, cells assumed more elongated morphologies with distinct protrusions, and there was an elevated secretion of collagen III and tension suture, facilitating soft tissue repair. This research illuminates the structural and mechanical dynamics of electrospun fiber scaffolds; it will provide crucial insights for the advancement of precise and controllable tissue engineering materials.

Gelatin-methacryloyl (GelMA) is a highly adaptable biomaterial extensively utilized in skin regeneration applications. However, it is frequently imperative to enhance its physical and biological qualities by including supplementary substances in its composition. The purpose of this study was to fabricate and characterize a bi-layered GelMA-gelatin scaffold using 3D bioprinting. The upper section of the scaffold was encompassed with keratinocytes to simulate the epidermis, while the lower section included fibroblasts and HUVEC cells to mimic the dermis. A further step involved the addition of amniotic membrane extract (AME) to the scaffold in order to promote angiogenesis. The incorporation of gelatin into GelMA was found to enhance its stability and mechanical qualities. While the Alamar blue test demonstrated that a high concentration of GelMA (20%) resulted in a decrease in cell viability, the live/dead cell staining revealed that incorporation of AME increased the quantity of viable HUVECs. Further, gelatin upregulated the expression of KRT10 in keratinocytes and VIM in fibroblasts. Additionally, the histological staining results demonstrated the formation of well-defined skin layers and the creation of extracellular matrix (ECM) in GelMA/gelatin hydrogels during a 14-day culture period. Our study showed that a 3D-bioprinted composite scaffold comprising GelMA, gelatin, and AME can be used to regenerate skin tissues., (© 2024. The Author(s).)

In the process of tissue engineering, several types of stresses can influence the outcome of tissue regeneration. This outcome can be understood by designing hydrogels that mimic this process and studying how such hydrogel scaffolds and cells behave under a set of stresses. Here, a hydrogel formulation is proposed to create biomimetic scaffolds suitable for fibroblast cell culture. Subsequently, we examine the impact of external stresses on fibroblast cells cultured on both solid and porous hydrogels. These stresses included mechanical tension and altered-gravity conditions experienced during the 83rd parabolic flight campaign conducted by the European Space Agency. This study shows distinct cellular responses characterized by cell aggregation and redistribution in regions of intensified stress concentration. This paper presents a new biomimetic hydrogel that fulfills tissue-engineering requirements in terms of biocompatibility and mechanical stability. Moreover, it contributes to our comprehension of cellular biomechanics under diverse gravitational conditions, shedding light on the dynamic cellular adaptations versus varying stress environments.

Gelatin methacrylate (GelMA) hydrogels are expected to be ideal skin tissue engineering dressings for a wide range of clinical treatments. Herein, we report the preparation of GelMA or antifreeze GelMA hydrogel sheets with different GelMA concentrations, crosslinking times, and cryoprotectant (CPA) concentrations. The crystallization properties of GelMA or antifreeze GelMA hydrogel sheets were studied by cryomicroscopy and differential scanning calorimetry (DSC). It was found that the growth of ice crystals was slower when GelMA hydrogel concentration was more than 7%. The 10% DMSO-7% GelMA hydrogel sheets crosslinked for 60 min showed no ice crystal formation and growth during cooling and warming. The DSC results showed that the vitrification temperature of the 10% DMSO-7% GelMA hydrogel sheet was -111°C. Furthermore, slow freezing and rapid freezing of fibroblast-laden GelMA or antifreeze GelMA hydrogel sheets, and tissue-engineered skin constructs were studied. The results showed no significant difference in cell survival between slow (88.8% ± 1.51) and rapid (89.2% ± 3.00) freezing of fibroblast-loaded 10% DMSO-7% GelMA hydrogel sheets, and significantly higher than that of 7% GelMA hydrogel sheets (33.4% ± 5.46). The cell viability was higher in tissue-engineered skin constructs after slow freezing (86.34% ± 1.45) than rapid freezing (72.74% ± 1.34). We believe that the combination of antifreeze hydrogels and tissue engineering will facilitate the cryopreservation of tissue engineering constructs., (© 2024 Wiley Periodicals LLC.)

The effects of compressive strain during orthodontic treatment on gene expression profiles of periodontal ligament fibroblasts (PDLFs) have mostly been studied in 2D cell culture. However, cells behave differently in many aspects in 3D culture. Therefore, the effect of pressure application on PDLFs in different 3D structures was investigated. PDLFs were either conventionally seeded or embedded into different 3D structures (spheroids, Mebiol ® gel, 3D scaffolds) and exposed to compressive force or incubated without pressure. For one 3D scaffold (POR), we also tested the effect of different compressive forces and application times. Expression of an angiogenic gene ( VEGF ), a gene involved in extracellular matrix synthesis ( COL1A2 ), inflammatory genes ( IL6 , PTGS2 ), and genes involved in bone remodelling ( OPG , RANKL ) were investigated by RT-qPCR. Depending on the used 3D cell culture model, we detected different effects of compressive strain on expression profiles of PDLFs. COL1A2 was downregulated in all investigated 3D culture models. Angiogenetic and proinflammatory genes were regulated differentially between models. In 3D scaffolds, regulation of bone-remodelling genes upon compressive force was contrary to that observed in 3D gels. 3D cell culture models provide better approximations to in vivo physiology, compared with conventional 2D models. However, it is crucial which 3D structures are used, as these showed diverse effects on the expression profiles of PDLFs during mechanical strain.

Cardiac patch implantation helps maximize the paracrine function of grafted cells and serves as a reservoir of soluble proangiogenic factors required for the neovascularization of infarcted hearts. We have previously fabricated a cardiac patch, EF-HAM, composed of a human amniotic membrane (HAM) coated with aligned PLGA electrospun fibers (EF). In this study, we aimed to evaluate the biocompatibility and angiogenic effects of EF-HAM scaffolds with varying fiber thicknesses on the paracrine behavior of skeletal muscle cells (SkM). Conditioned media (CM) obtained from SkM-seeded HAM and EF-HAM scaffolds were subjected to multiplex analysis of angiogenic factors and tested on HUVECs for endothelial cell viability, migration, and tube formation analyses. All three different groups of EF-HAM scaffolds demonstrated excellent biocompatibility with SkM. CM derived from SkM-seeded EF-HAM 7 min scaffolds contained significantly elevated levels of proangiogenic factors, including angiopoietin-1, IL-8, and VEGF-C compared to plain CM, which was obtained from SkM cultured on the plain surface. CM obtained from all SkM-seeded EF-HAM scaffolds significantly increased the viability of HUVECs compared to plain CM after five days of culture. However, only EF-HAM 7 min CM induced a higher migration capacity in HUVECs and formed a longer and more elaborate capillary-like network on Matrigel compared with plain CM. Surface roughness and wettability of EF-HAM 7 min scaffolds might have influenced the proportion of skeletal myoblasts and fibroblasts growing on the scaffolds and subsequently potentiated the angiogenic paracrine function of SkM. This study demonstrated the angioinductive properties of EF-HAM composite scaffold and its potential applications in the repair and regeneration of ischemic tissues.

Amputation injuries in mammals are typically non-regenerative; however, joint regeneration is stimulated by BMP9 treatment, indicating the presence of latent articular chondrocyte progenitor cells. BMP9 induces a battery of chondrogenic genes in vivo, and a similar response is observed in cultures of amputation wound cells. Extended cultures of BMP9-treated cells results in differentiation of hyaline cartilage, and single cell RNAseq analysis identified wound fibroblasts as BMP9 responsive. This culture model was used to identify a BMP9-responsive adult fibroblast cell line and a culture strategy was developed to engineer hyaline cartilage for engraftment into an acutely damaged joint. Transplanted hyaline cartilage survived engraftment and maintained a hyaline cartilage phenotype, but did not form mature articular cartilage. In addition, individual hypertrophic chondrocytes were identified in some samples, indicating that the acute joint injury site can promote osteogenic progression of engrafted hyaline cartilage. The findings identify fibroblasts as a cell source for engineering articular cartilage and establish a novel experimental strategy that bridges the gap between regeneration biology and regenerative medicine., Competing Interests: Competing interests The authors declare no competing or financial interests., (© 2022. Published by The Company of Biologists Ltd.)

Chitosan and poly(3-hydroxybutyrate) are non-toxic, biodegradable, and biocompatible polymers extensively used in regenerative medicine. However, it is unknown whether the chemical combination of these polymers can produce a biomaterial that induces an appropriate cellular response in vitro in mammalian cells. This study aimed to test the ability of a novel salt-leached polyurethane scaffold of chitosan grafted with poly(3-hydroxybutyrate) to support the growth of three mammalian cell lines of different origin: a) HEK-293 cells, b) i28 mouse myoblasts, and c) human dermal fibroblasts. The viability of the cells was assessed by either evaluation of their capacity to maintain the expression of the green fluorescent protein by adenoviral transduction or by esterase activity and plasma membrane integrity. The results indicated that the three cell lines attached well to the scaffold; however, when i28 cells were induced to differentiate, they did not produce morphologically distinct myofibers, and cell growth ceased. In conclusion, the findings reveal that, altogether, these observations suggest that this foam scaffold supports cell growth and proliferation but may not apply to all cell types. Hence, one crucial question yet to be resolved is a poly (saccharide-ester-urethane) derivative with a nano-topography that elicits a similar cellular response for different biological environments.

Introduction: Biofabrication of skin tissue equivalents using 3D bioprinting technology has gained much attention in recent times due to the simplicity, the versatility of the technology and its ability in bioengineering biomimetic tissue histology. The key component being the bioink, several groups are actively working on the development of various bioink formulations for optimal skin tissue construction., Methods: Here, we present alginate (ALG), gelatin (GEL) and diethylaminoethyl cellulose (DCEL) based bioink formulation and its application in bioprinting and biofabrication of skin tissue equivalents. Briefly, DEAE cellulose powder was dispersed in alginate solution with constant stirring at 60 °C to obtain a uniform distribution of cellulose fibers; this was then mixed with GEL solution to prepare the bioink. The formulation was systematically characterized for its morphological, physical, chemical, rheological, biodegradation and biocompatibility properties. The printability, shape fidelity and cell-laden printing were assessed using the CellInk bioprinter., Results: The bioink proved to be a good printable, non-cytotoxic and stable hydrogel formulation. The primary human fibroblast and keratinocyte-loaded 3D bioprinted constructs showed excellent cell viability, collagen synthesis, skin-specific marker and biomimetic tissue histology., Conclusion: The results demonstrated the successful formulation of ALG-GEL-DCEL bioink and its application in the development of human skin tissue equivalents with distinct epidermal-dermal histological features., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A novel brush-like poly(2-aminoethyl methacrylate) (PAEMA) was grafted onto chitosan (CS) through gamma radiation-induced polymerization. The copolymer (CS-g-PAEMA) was used to prepare a sodium acetate leached poly(urethane-urea) scaffold. The above derivatives were developed, synthesized, and characterized to meet the specific characteristics of biomaterials. The results revealed that this method is an easy and successful route for grafting PAEMA onto CS. The feasibility of preparing a CS-g-PAEMA polyurethane foam was confirmed by mechanical, morphometric, spectroscopic, and cytotoxic studies. The scaffold showed high biocompatibility both in vitro and in vivo. The first experiment proved that CS-based polyurethane efficiently allows the dynamic culturing of human fibroblast cells. Additionally, an in vivo study in a murine model indicated a complete integration of the scaffold to surrounding subcutaneous tissue as supported by the histological and histochemical assessments. The aforementioned results support the use of CS-g-PAEMA poly(saccharide-urethane) as a model of in vitro-engineered skin., (Copyright © 2021. Published by Elsevier Ltd.)

Electrospinning of natural and synthetic polymers has shown to be a great candidate for the fabrication of tissue engineering scaffolds due to their similarity to the nanofibrous structure of natural extracellular matrix (ECM). Moreover, the addition of ECM-like proteins could enhance the biocompatibility of these scaffolds. In this study, soluble eggshell protein (SEP) was first extracted and synthesized from the raw eggshell membrane. The characteristics and biocompatibility of the extracted SEP were evaluated using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) analysis and 3-(4,5- dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide) (MTT) assay. For scaffolds fabrication, a three-layer nanofibrous composite structure was produced using the electrospinning technique. The outer layers composed of polyvinyl alcohol, chitosan, and extracted SEP while the middle layer composed of polyethylene oxide, gelatin, and zinc oxide nanoparticles (ZnO-NPs). For each layer, the electrospinning parameters were adjusted to form bead-free fibers. To improve fibers' stability against body fluids, the produced fibers were crosslinked using glutaraldehyde vapor. Several techniques such as scanning electron microscopy (SEM), energy dispersive X-ray, ATR-FTIR, swelling, tensile test, in vitro biodegradation, and MTT assay were implemented to evaluate the physical, chemical, and biological characterization of the fabricated fibers. The results showed that crosslinked fibers have adequate stability in water, suitable mechanical properties, and promising water uptake capacity. The MTT results also revealed that SEP and ZnO-NPs could increase scaffolds biocompatibility. Moreover, SEM photographs of cultured fibroblasts cells on the scaffolds showed that cells were well attached on the scaffolds and preserve their natural spindle shapes. Altogether, our findings demonstrated that the produced three-layer composite scaffolds are potential candidates for skin tissue engineering., (© 2021 Wiley Periodicals LLC.)

Since the discovery that applying electrical stimulation can promote cell growth, proliferation, and tissue regeneration, research on bio-piezoelectric materials is being actively conducted. In this study, a composite material was prepared by mixing polyvinylidene fluoride (PVDF), a conventional piezoelectric polymer, and silk fibroin (SF), a natural piezoelectric material that recently attracting attention. These two polymers were fabricated into a composite fiber mat using electrospinning technology. To find optimal conditions, SF was added in various ratios to prepare electrospun PVDF/SF mats. The characteristics of these PVDF/SF composite mats were then analyzed through various evaluations and in vitro studies. It was confirmed that PVDF and SF were successfully mixed through scanning electron microscope images and structural analysis such as x-ray diffractometer and Fourier transform infrared. The results revealed that adding an appropriate amount of SF could improve the tensile strength, enhance cell proliferation rate, and generate a voltage similar to that of a conventional PVDF-only electrospinning mat. Such fabricated electrospun PVDF/SF composite mats are expected to be useful in the bio-piezoelectric field because they can maintain piezoelectricity while compensating for the shortcomings, such as low physical properties, of a PVDF electrospun mat., (© 2021 John Wiley & Sons Ltd.)

Tissue-engineered skin equivalents are reconstructed the functions of human skin and can be used as an alternative to animal experiments in basic study or as cultured skin for regenerative medicine. Recent studies confirmed that epidermal tight junctions (TJs), which are complex intercellular junctions formed in the stratum granulosum of human skin, play an important part in the formation of the skin barrier function. In well-formed reconstructed human skin models, there are several reports on the expression of TJ proteins and their localization in epidermal layer, however, the morphological features of TJ, showing tight junctional contacts and the process of TJ formation have yet to be investigated. In this study, we systematically examined and identified TJ-related proteins and TJ structure in three-dimensional (3D) human skin equivalents reconstructed by layer-by-layer (LbL) cell coating technique (LbL-3D Skin). We demonstrate localization of TJ-related proteins and time course of formation of TJ structure with typical junctional morphology in LbL-3D Skin. These data provide evidence that the LbL-3D Skin is an in vitro model with structure and function extremely similar to living skin., (© 2021 John Wiley & Sons Ltd.)

Tissue engineered vascular grafts (TEVG) are potentially clear from ethical and epidemiological concerns sources for reconstructive surgery for small diameter blood vessels replacement. Here, we proposed a novel method to create three-layered TEVG on biocompatible glass fiber scaffolds starting from flat sheet state into tubular shape and to train the resulting tissue by our developed bioreactor system. Constructed tubular tissues were matured and trained under 3 types of individual flow programs, and their mechanical and biological properties were analyzed. Training in the bioreactor significantly increased the tissue burst pressure resistance (up to 18 kPa) comparing to untrained tissue. Fluorescent imaging and histological examination of trained vascular tissue revealed that each cell layer has its own individual response to training flow rates. Histological analysis suggested reverse relationship between tissue thickness and shear stress, and the thickness variation profiles were individual between all three types of cell layers. Concluding: a three-layered tissue structure similar to physiological can be assembled by seeding different cell types in succession; the following training of the formed tissue with increasing flow in a bioreactor is effective for promoting cell survival, improving pressure resistance, and cell layer formation of desired properties., (© 2021. The Author(s).)

Due to the limited number of organ donors, 3D printing of organs is a promising technique. Tissue engineering is increasingly using xenogeneic material for this purpose. This study was aimed at assessing the safety of decellularized porcine pancreas, together with the analysis of the risk of an undesirable immune response. We tested eight variants of the decellularization process. We determined the following impacts: rinsing agents (PBS/NH 3 ·H 2 O), temperature conditions (4 °C/24 °C), and the grinding method of native material (ground/cut). To assess the quality of the extracellular matrix after the completed decellularization process, analyses of the following were performed: DNA concentration, fat content, microscopic evaluation, proteolysis, material cytotoxicity, and most importantly, the Triton X-100 content. Our analyses showed that we obtained a product with an extremely low detergent content with negligible residual DNA content. The obtained results confirmed the performed histological and immuno-fluorescence staining. Moreover, the TEM microscopic analysis proved that the correct collagen structure was preserved after the decellularization process. Based on the obtained results, we chose the most favorable variant in terms of quality and biology. The method we chose is an effective and safe method that gives a chance for the development of transplant and regenerative medicine.

Engineered epithelial cell sheets for clinical replacement of non-functional upper aerodigestive tract mucosa are regulated as medicinal products and should be manufactured to the standards of good manufacturing practice (GMP). The current gold standard for growth of epithelial cells for research utilises growth arrested murine 3T3 J2 feeder layers, which are not available for use as a GMP compliant raw material. Using porcine mucosal tissue, we demonstrate a new method for obtaining and growing non-keratinised squamous epithelial cells and fibroblast cells from a single biopsy, replacing the 3T3 J2 with a growth arrested primary fibroblast feeder layer and using pooled Human Platelet lysate (HPL) as the media serum supplement to replace foetal bovine serum (FBS). The initial isolation of the cells was semi-automated using an Octodissociator and the resultant cell suspension cryopreservation for future use. When compared to the gold standard of 3T3 J2 and FBS containing medium there was no reduction in growth, viability, stem cell population or ability to differentiate to mature epithelial cells. Furthermore, this method was replicated with Human buccal tissue, providing cells of sufficient quality and number to create a tissue engineered sheet.

The need for an autologous cell source for bone tissue engineering and medical applications has led researchers to explore multipotent mesenchymal stromal cells (MSC), which show stem cell plasticity, in various human tissues. However, MSC with different tissue origins vary in their biological properties and their capability for osteogenic differentiation. Furthermore, MSC-based therapies require large-scale ex vivo expansion, accompanied by cell type-specific replicative senescence, which affects osteogenic differentiation. To elucidate cell type-specific differences in the osteogenic differentiation potential and replicative senescence, we analysed the impact of BMP and TGF-β signaling in adipose-derived stromal cells (ASC), fibroblasts (FB), and dental pulp stromal cells (DSC). We used inhibitors of BMP and TGF-β signaling, such as SB431542, dorsomorphin and/or a supplemental addition of BMP-2. The expression of high-affinity binding receptors for BMP-2 and calcium deposition with alizarin red S were evaluated to assess osteogenic differentiation potential. Our study demonstrated that TGF-β signaling inhibits osteogenic differentiation of ASC, DSC and FB in the early cell culture passages. Moreover, DSC had the best osteogenic differentiation potential and an activation of BMP signaling with BMP-2 could further enhance this capacity. This phenomenon is likely due to an increased expression of activin receptor-like kinase-3 and -6. However, in DSC with replicative senescence (in cell culture passage 10), osteogenic differentiation sharply decreased, and the simultaneous use of BMP-2 and SB431542 did not result in further improvement of this process. In comparison, ASC retain a similar osteogenic differentiation potential regardless of whether they were in the early (cell culture passage 3) or later (cell culture passage 10) stages. Our study elucidated that ASC, DSC, and FB vary functionally in their osteogenic differentiation, depending on their tissue origin and replicative senescence. Therefore, our study provides important insights for cell-based therapies to optimize prospective bone tissue engineering strategies.

Mechanical stress of ligaments varies; hence, ligament fibroblasts must adapt their expression profile to novel mechanomilieus to ensure tissue resilience. Activation of the mechanoreceptors leads to a specific signal transduction, the so-called mechanotransduction. However, with regard to their natural three-dimensional (3D) microenvironment cell reaction to mechanical stimuli during emigrating from a 3D spheroid culture is still unclear. This study aims to provide a deeper understanding of the reaction profile of anterior cruciate ligament (ACL)-derived fibroblasts exposed to cyclic uniaxial strain in two-dimensional (2D) monolayer culture and during emigration from 3D spheroids with respect to cell survival, cell and cytoskeletal orientation, distribution, and expression profile. Monolayers and spheroids were cultured in crosslinked polydimethyl siloxane (PDMS) elastomeric chambers and uniaxially stretched (14% at 0.3 Hz) for 48 h. Cell vitality, their distribution, nuclear shape, stress fiber orientation, focal adhesions, proliferation, expression of ECM components such as sulfated glycosaminoglycans, collagen type I, decorin, tenascin C and cell-cell communication-related gap junctional connexin (CXN) 43, tendon-related markers Mohawk and tenomodulin (myodulin) were analyzed. In contrast to unstretched cells, stretched fibroblasts showed elongation of stress fibers, cell and cytoskeletal alignment perpendicular to strain direction, less rounded cell nuclei, increased numbers of focal adhesions, proliferation, amplified CXN43, and main ECM component expression in both cultures. The applied cyclic stretch protocol evoked an anabolic response and enhanced tendon-related marker expression in ACL-derived fibroblasts emigrating from 3D spheroids and seems also promising to support in future tissue formation in ACL scaffolds seeded in vitro with spheroids.

Tissue engineering is a method of growing importance regarding clinical application in the genitourinary region. One of the key factors in successfully development of an artificially tissue engineered mucosa equivalent (TEOM) is the optimal choice of the scaffold. Collagen scaffolds are regarded as gold standard in dermal tissue reconstruction. Four distinct collagen scaffolds were evaluated for the ability to support the development of an organotypical tissue architecture. TEOMs were established by seeding cocultures of primary oral epithelial cells and fibroblasts on four distinct collagen membranes. Cell viability was assessed by MTT-assay. The 3D architecture and functionality of the tissue engineered oral mucosa equivalents were evaluated by confocal laser-scanning microscopy and immunostaining. Cell viability was reduced on the TissuFoil E® membrane. A multi-stratified epithelial layer was established on all four materials, however the TEOMs on the Bio-Gide® scaffold showed the best fibroblast differentiation, secretion of tenascin and fibroblast migration into the membrane. The TEOMs generated on Bio-Gide® scaffold exhibited the optimal cellular organization into a cellular 3D network. Thus, the Bio-Gide® scaffold is a suitable matrix for engineering of mucosa substitutes in vitro., (© 2020 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals LLC.)

Long urethral strictures are often treated with autologous genital skin and buccal mucosa grafts; however, risk of hair ingrowth and donor site morbidity, restrict their application. To overcome this, we introduced a tissue-engineered human urethra comprising adipose-derived stem cell (ASC)-based self-assembled scaffold, human urothelial cells (UCs) and smooth muscle cells (SMCs). ASCs were cultured with ascorbic acid to stimulate extracellular matrix (ECM) production. The scaffold (ECM) was stained with collagen type-I antibody and the thickness was measured under a confocal microscope. Results showed that the thickest scaffold (28.06 ± 0.59 μm) was achieved with 3 × 10 4 cells/cm 2 seeding density, 100 μg/mL ascorbic acid concentration under hypoxic and dynamic culture condition. The biocompatibility assessment showed that UCs and SMCs seeded on the scaffold could proliferate and maintain the expression of their markers (CK7, CK20, UPIa, and UPII) and (α-SMA, MHC and Smootheline), respectively, after 14 days of in vitro culture. ECM gene expression analysis showed that the ASC and dermal fibroblast-based scaffolds (control) were comparable. The ASC-based scaffold can be handled and removed from the plate. This suggests that multiple layers of scaffold can be stacked to form the urothelium (seeded with UCs), submucosal layer (ASCs only), and smooth muscle layer (seeded with SMCs) and has the potential to be developed into a fully functional human urethra for urethral reconstructive surgeries.

Finding the right balance in mechanical properties and degradation rate of biodegradable materials for biomedical applications is challenging, not only at the time of implantation but also during biodegradation. For instance, high elongation at break and toughness with a mid-term degradation rate are required for tendon scaffold or suture application, which cannot be found in each alpha polyester individually. Here, we hypothesise that blending semi-crystalline poly(p-dioxanone) (PDO) and poly(lactide-co-caprolactone) (LCL) in a specific composition will enhance the toughness while also enabling tailored degradation times. Hence, blends of PDO and LCL (PDO/LCL) were prepared in varying concentrations and formed into films by solvent casting. We thoroughly characterised the chemical, thermal, morphological, and mechanical properties of the new blends before and during hydrolytic degradation. Cellular performance was determined by seeding mouse fibroblasts onto the samples and culturing for 72 hours, before using proliferation assays and confocal imaging. We found that an increase in LCL content causes a decrease in hydrolytic degradation rate, as indicated by induced crystallinity, surface and bulk erosions, and tensile properties. Interestingly, the noncytotoxic blend containing 30% PDO and 70% LCL (PDO3LCL7) resulted in small PDO droplets uniformly dispersed within the LCL matrix and demonstrated a tailored degradation rate and toughening behaviour with a notable strain-hardening effect reaching 320% elongation at break; over 3 times the elongation of neat LCL. In summary, this work highlights the potential of PDO3LCL7 as a biomaterial for biomedical applications like tendon tissue engineering or high-performance absorbable sutures.

The fabrication of functional biomaterials for organ replacement and tissue repair remains a major goal of biomedical engineering. Advances in additive manufacturing (AM) technologies and computer-aided design (CAD) are advancing the tools available for the production of these devices. Ideally, these constructs should be matched to the geometry and mechanical properties of the tissue at the needed implant site. To generate geometrically defined and structurally supported multicomponent and cell-laden biomaterials, we have developed a method to integrate hydrogels with 3D-printed lattice scaffolds leveraging surface tension-assisted AM.

Bench-to-bedside axis of therapeutic product development is currently being oriented towards minimum invasiveness on both ends-not only clinical application but harvesting of the starting biological material as well. This is particularly relevant for Advanced Therapy Medicinal Products and their specific legislative requirements, even more so in skin regeneration. It is precisely the skin equivalents and grafts that benefit from the minimum-to-noninvasive approach to a noteworthy extent, taking in account the sensitive nature of both skin harvesting and grafting.This chapter includes protocols for two separate steps of generating skin equivalent from the cells cultured from hair follicle outer root sheath. The first step is a non-pigmented epidermal equivalent generated from human keratinocytes from the outer root sheath named non-pigmented epidermal graft. The second step consists of co-cultivating human keratinocytes and human melanocytes from the outer root sheath, hereby producing a pigmented epidermal graft.

Following wound healing, skin is replaced by a specialized tissue called scar. Sometime, this scar can become pathologic, called hypertrophic scar, with a high amount of extracellular matrix, capillaries, and myofibroblast persistence. To understand the mechanisms at the origin of the fibrosis is paramount to treat patients, but despite few animal models and in vitro studies using mainly human pathological cells cultured on plastic on monolayer, the treatment of these fibrotic scars remains unsatisfactory. As in tissue, cells are most often imbedded in extracellular matrix, we have developed, using a tissue engineering method, new in vitro models to study human fibrotic skin pathologies as hypertrophic scars. Human cells isolated from hypertrophic scars are used to reconstitute a three-dimensional fibrotic skin comprising both dermal and epidermal parts. This method called the self-assembly approach is based on the cell capacity to reconstitute their own environment as in vivo. In this chapter, the described methods include extraction and culture of human scar keratinocytes and fibroblasts from cutaneous biopsies as well as the protocols to produce fibrotic skin that can be used to study pathological process.

Melt electrospinning writing (MEW) is a solvent-free fabrication method for making polymer fiber scaffolds with features which include large surface area, high porosity, and controlled deposition of the fibers. These scaffolds are ideal for tissue engineering applications. Here we describe how to produce scaffolds made from poly(ε-caprolactone) using MEW and the seeding of primary human-derived dermal fibroblasts to create cell-scaffold constructs. The same methodology could be used with any number of cell types and MEW scaffold designs.

In vitro epithelial models are valuable tools for both academic and industrial laboratories to investigate tissue physiology and disease. Epithelial tissues comprise the surface epithelium, basement membrane, and underlying supporting stromal cells. There are various types of epithelial tissue and they have a diverse and intricate architecture in vivo, which cannot be successfully recapitulated using two-dimensional (2D) cell culture. Tissue engineering strategies can be applied to bioengineer the organized, multilayered, and multicellular structure of epithelial tissues in vitro. Alvetex ® is a porous, polystyrene scaffold that enables fibroblasts to synthesize a complex network of endogenous, humanized extracellular matrix proteins. This creates a physiologically relevant three-dimensional (3D) subepithelial microenvironment, enriched with mechanical and chemical cues, which supports the organization and differentiation of epithelial cells. Such technology has been used to bioengineer different epithelial architectures in vitro, including the simple, columnar structure of the intestine and the stratified, squamous, and keratinized structure of skin. Epithelial tissue models provide a useful platform for fundamental and translational research, with multifaceted applications including disease modeling, drug discovery, and product development.

The tissue reaction of pig skin to implantation of decellularized and recellularized dermal matrices on a formed wound defect was evaluated by histological methods on days 2, 5, 8, 16, and 20 after surgery. Differences in tissue response to different matrices were identified. In experimental wounds coated with decellularized dermal matrices, we observed the formation of a scar tissue, which required autodermoplasty on day 12 of the experiment. In wounds coated with recellularized dermal matrices, all layers of the skin completely recovered by day 20 after surgery with the formation of full dermal and epidermal layers. Our findings suggest that reparative morphological changes in the wound depend on the presence of fibroblasts in the implanted dermal matrix.

The utilization of conductive polymers for fabrication of neural scaffolds have attracted much interest because of providing a microenvironment which can imitate nerve tissues. In this study, polypyrrole (PPy)-alginate (Alg) composites were prepared using different percentages of alginate and pyrrole by oxidative polymerization method using FeCl 3 as an oxidant and electrical conductivity of composites were measured by four probe method. In addition, chitosan-based nanoparticles were synthesized by ionic gelation method and after characterization merged into PPy-Alg composite in order to fabricate a conductive, hydrophilic, processable and stable scaffold. Physiochemical characterization of nanochitosan/PPy-Alg scaffold such as electrical conductivity, porosity, swelling and degradation was investigated. Moreover, cytotoxicity and proliferation were examined by culturing OLN-93 neural and human dermal fibroblasts cells on the Nanochitosan/PPy-Alg scaffold. Due to the high conductivity, the film with ratio 2:10 (PPy-Alg) was recognized more suitable for fabrication of the final scaffold. Results from FT-IR and SEM, evaluation of porosity, swelling and degradation, as well as viability and proliferation of OLN-93 neural and fibroblast cells confirmed cytocompatiblity of the Nanochitosan/PPy-Alg scaffold. Based on the features of the constructed scaffold, Nanochitosan/PPy-Alg scaffold can be a proper candidate for neural tissue engineering.

Natural hydrogels are widely investigated for biomedical applications because of their structures similar to extracellular matrix of native tissues, possessing excellent biocompatibility and biodegradability. However, they are often susceptible to mechanical disruption. In this study, self-healing hyaluronic acid (HA) hydrogels are fabricated through a facile dynamic covalent Schiff base reaction. Dialdehyde-modified HA (AHA) precursor was synthesized, and then the AHA/cystamine dihydrochloride (AHA/Cys) hydrogels were formed by blending AHA and Cys at acidic pH levels. By varying Cys to AHA ratio, the hydrogel morphology, swelling and kinetics of gelation could be controlled. Gelation occurred fast, which was predominantly attributed to Schiff base reaction between the dialdehyde groups on AHA and amimo groups on Cys. The hydrogel exhibited improved mechanical properties with increase in Cys content. Furthermore, due to dynamic imine bonds, this hydrogel demonstrated excellent self-healing ability based on the stress after mechanical disruption. Also, it was found to be pH-responsive and injectable. Taken together, this kind of hyaluronic acid hydrogel can provide promising future for various biomedical applications in drug delivery, bioprinting, smart robots and tissue regeneration., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Residual chemicals that are presented during tissue processing in human tissue banks can be a risk for the allograft recipient. Determine the residual concentrations of the antibiotics and detergent used in the process of human decellularized tissue-engineered heart valves stored in isotonic saline solution up to 18 months. A total of 24 human decellularized allografts were stored in sterile sodium chloride and analyzed immediately after the decellularization process (0 months) and after storage for 6, 12, and 18 months, which includes the use of sodium dodecyl sulfate (SDS) and antibiotics (cefoxitin, vancomycin hydrochloride, lincomycin hydrochloride, polymyxin B sulfate). These valves were used for suitability tests, the zone of inhibition evaluation, and direct contact cytotoxicity assay. The stock solution from 32 valves was used for LC-MS/MS analysis of antibiotics and SDS. Tissue samples from decellularized valves showed a zone of inhibition formation for S. aureus and B. subtilis, suggesting the presence of an inhibitory molecule in the tissue. Cytotoxicity tests were negative. Polymyxin B, vancomycin, and SDS were detected and quantified in human decellularized aortic and pulmonary allografts during all periods of the study. There were no traces of residual cefoxitin and lincomycin in the tissue stock solution. We found residual concentrations of the antibiotics and detergent used in the process of human decellularized tissue-engineered heart valves stored in isotonic saline solution up to 18 months.

Purpose: To explore the feasibility of constructing tissue-engineered vascularised oral mucosa-like structures with rabbit ACVM-0.25% HLC-I scaffold and human gingival fibroblasts (HGFs), human gingival epithelial cells (HGECs) and vascular endothelial-like cells (VEC-like cells)., Method: Haematoxylin and Eosin (H&E) staining, immunohistochemical, immunofluorescence, 5-ethynyl-2'-deoxyuridine (EdU) staining and scanning electron microscope (SEM) were performed to detect the growth status of cells on the scaffold complex. After the scaffold complex implanted into nude mice for 28 days, tissues were harvested to observe the cell viability and morphology by the same method as above. Additionally, biomechanical experiments were used to assess the stability of composite scaffold., Results: Immunofluorescence and Immunohistochemistry showed positive expression of Vimentin, S100A 4 and CK, and the induced VEC-like cells had the ability to form tubule-like structures. In vitro observation results showed that HGFs, HGECs and VEC-like had good compatibility with ACVM-0.25% HLC-I and could be layered and grow in the scaffold. After implanted, the mice had no immune rejection and no obvious scar repair on the body surface. The biomfechanical test results showed that the composite scaffold has strong stability., Conclusion: The tissue-engineered vascularised complexes constructed by HGFs, HGECs, VEC-like cells and ACVM-0.25% HLC-I has good biocompatibility and considerable strength.

3D printing is a rapidly evolving field for biological (bioprinting) and non-biological applications. Due to a high degree of freedom for geometrical parameters in 3D printing, prototype printing of bioreactors is a promising approach in the field of Tissue Engineering. The variety of printers, materials, printing parameters and device settings is difficult to overview both for beginners as well as for most professionals. In order to address this problem, we designed a guidance including test bodies to elucidate the real printing performance for a given printer system. Therefore, performance parameters such as accuracy or mechanical stability of the test bodies are systematically analysed. Moreover, post processing steps such as sterilisation or cleaning are considered in the test procedure. The guidance presented here is also applicable to optimise the printer settings for a given printer device. As proof of concept, we compared fused filament fabrication, stereolithography and selective laser sintering as the three most used printing methods. We determined fused filament fabrication printing as the most economical solution, while stereolithography is most accurate and features the highest surface quality. Finally, we tested the applicability of our guidance by identifying a printer solution to manufacture a complex bioreactor for a perfused tissue construct. Due to its design, the manufacture via subtractive mechanical methods would be 21-fold more expensive than additive manufacturing and therefore, would result in three times the number of parts to be assembled subsequently. Using this bioreactor we showed a successful 14-day-culture of a biofabricated collagen-based tissue construct containing human dermal fibroblasts as the stromal part and a perfusable central channel with human microvascular endothelial cells. Our study indicates how the full potential of biofabrication can be exploited, as most printed tissues exhibit individual shapes and require storage under physiological conditions, after the bioprinting process., Competing Interests: The authors indicate no conflict of interest.

Background: Treatment of patients affected by severe burns is challenging, especially due to the high risk of Pseudomonas infection. In the present work, we have generated a novel model of bioartificial human dermis substitute by tissue engineering to treat infected wounds using fibrin-agarose biomaterials functionalized with nanostructured lipid carriers (NLCs) loaded with two anti-Pseudomonas antibiotics: sodium colistimethate (SCM) and amikacin (AMK)., Results: Results show that the novel tissue-like substitutes have strong antibacterial effect on Pseudomonas cultures, directly proportional to the NLC concentration. Free DNA quantification, WST-1 and Caspase 7 immunohistochemical assays in the functionalized dermis substitute demonstrated that neither cell viability nor cell proliferation were affected by functionalization in most study groups. Furthermore, immunohistochemistry for PCNA and KI67 and histochemistry for collagen and proteoglycans revealed that cells proliferated and were metabolically active in the functionalized tissue with no differences with controls. When functionalized tissues were biomechanically characterized, we found that NLCs were able to improve some of the major biomechanical properties of these artificial tissues, although this strongly depended on the type and concentration of NLCs., Conclusions: These results suggest that functionalization of fibrin-agarose human dermal substitutes with antibiotic-loaded NLCs is able to improve the antibacterial and biomechanical properties of these substitutes with no detectable side effects. This opens the door to future clinical use of functionalized tissues.

Developmental Engineering aims to imitate natural tissue regeneration processes via an additive manufacturing approach. This research developes a technology to fabricate ready-made cell marbles (CMs) by wrapping cell suspension droplets of (3-15 μl) with electrospun hydrophobic nanofibers, as modular building blocks for developmental engineering. Human dermal fibroblasts and/or immortalised keratinocytes were suspended in the culture media cores of the CMs. The encapsulated cells were observed to precipitate at bottoms or up-inclined inner surfaces of the fibrous shells within 10 min. The CMs were mechanically strong enough to be handled as soft solids, thus easily and accurately delivered using forceps into three distinct culture systems, including tissue culture plastics, cellulosic scaffolds and in vitro fibrin wound models. The release of the cells, culture media and nanofibers into specific delivery points within the investigated culture systems was achieved via the controlled rupture of the CMs triggered by the simple hydrophobic-hydrophilic interaction between the nanofibers and the aqueous surroundings. Further cell and tissue culture studies indicated that the prominent traits of the skin cells were well preserved during cell encapsulation and delivery processes, suggesting the great potential of the CMs for additive tissue manufacturing in developmental engineering., (Crown Copyright © 2020. Published by Elsevier B.V. All rights reserved.)

Advanced cardiovascular disease often requires surgical revascularization for small diameter arterial bypass procedures, and there is a need for alternative grafts in those patients lacking autologous vein. A decellularized biological vessel with the characteristics of a small artery and the ability to remodel in vivo could replace currently available bypass grafts. In this study, a biodegradable electrospun scaffold was specifically designed to be placed in a biomimetic perfusion system to generate a tissue-engineered vessel from human dermal fibroblasts. The polyglycolic acid electrospun scaffold was co-electrosprayed with a sacrificial porogen microparticle, polyethylene oxide, to increase porosity and pore size. After a 10-week culture period in the biomimetic system, the tissue-engineered vessel derived from human fibroblasts was further processed with decellularization to form an allogeneic tissue-engineered vessel. The tissue-engineered vessel had a similar morphology by histological staining for collagen and elastin before and after decellularization. The mechanical properties (burst pressure, ultimate tensile strength, and elastic modulus) remained stable after decellularization and were on the same magnitude as a human saphenous vein. The decellularization processing demonstrated no loss of collagen, near complete removal of DNA, and no presence of intracellular proteins. The decellularized tissue-engineered vessel supported the growth of endothelial cells on the surface, and fibroblasts were able to migrate into the midportion of the matrix. Therefore, an electrospun scaffold provides a versatile biomaterial to create a decellularized tissue-engineered vessel derived from human dermal fibroblasts with morphological and mechanical properties for use as a small diameter vascular graft., (© 2020 John Wiley & Sons, Ltd.)

Sterilization of a material carries the risk of unwanted changes in physical and chemical structure. The choice of method is a challenge-the process must be efficient, without significantly changing the properties of the material. In the presented studies, we analyzed the effect of selected sterilization/disinfection techniques on the properties of nanofibrous polyurethane biomaterial. Both radiation techniques (UV, gamma, e-beam) and 20 minutes' contact with 70% EtOH were shown not to achieve 100% sterilization efficiency. The agar diffusion test showed higher sterilization efficiency when using an antimicrobial solution (AMS). At the same time, none of the analyzed techniques significantly altered the morphology and distribution of fiber diameters. EtOH and e-beam sterilization resulted in a significant reduction in material porosity together with an increase in the Young's modulus. Similarly, AMS sterilization increased the value of Young's modulus. In most cases, the viability of cells cultured in contact with the sterilized materials was not affected by the sterilization process. Only for UV sterilization, cell viability was significantly lower and reached about 70% of control after 72 h of culture.

The purpose of this study was to investigate the tissue regenerating and biomechanical properties of processed eggshell membrane powder (PEP) for use in 3D-scaffolds. PEP is a low-cost, natural biomaterial with beneficial bioactive properties. Most importantly, this material is available as a by-product of the chicken egg processing (breaking) industry on a large scale, and it could have potential as a low-cost ingredient for therapeutic scaffolds. Scaffolds consisting of collagen alone and collagen combined with PEP were produced and analyzed for their mechanical properties and the growth of primary fibroblasts and skeletal muscle cells. Mechanical testing revealed that a PEP/collagen-based scaffold increased the mechanical hardness of the scaffold compared with a pure collagen scaffold. Scanning electron microscopy (SEM) demonstrated an interconnected porous structure for both scaffolds, and that the PEP was evenly distributed in dense clusters within the scaffold. Fibroblast and skeletal muscle cells attached, were viable and able to proliferate for 1 and 2 weeks in both scaffolds. The cell types retained their phenotypic properties expressing phenotype markers of fibroblasts (TE7, alpha-smooth muscle actin) and skeletal muscle (CD56) visualized by immunostaining. mRNA expression of the skeletal muscle markers myoD, myogenin, and fibroblasts marker (SMA) together with extracellular matrix components supported viable phenotypes and matrix-producing cells in both types of scaffolds. In conclusion, PEP is a promising low-cost, natural biomaterial for use in combination with collagen as a scaffold for 3D-tissue engineering to improve the mechanical properties and promote cellular adhesion and growth of regenerating cells.

Background: The fabrication of artificial cardiac tissue is an active area of research due to the shortage of donors for heart transplantation and for drug development. In our previous study, we fabricated vascularized three-dimensional (3D) cardiac tissue by layer-by-layer (LbL) and cell accumulation technique. However, it was not able to develop sufficient function because it was cultured on a hard plastic substrate. Experiment: Herein, we report the fabrication of high-performance 3D cardiac tissue by LbL and cell accumulation technique using a collagen culture vessel. Results: By using a collagen culture vessel, 3D cardiac tissue could be fabricated on a collagen culture vessel and this tissue showed high functionality due to improved interaction with the vessel. In the case of the plastic culture insert, 3D cardiac tissue was found to be peeled off, but this did not occur on the collagen culture vessel. In addition, the 3D cardiac tissue fabricated on a collagen culture vessel showed contraction that was 20 times larger than the tissue fabricated on a plastic culture insert. As a result of evaluation of cardiotoxicity using E-4031, the sensitivity of arrhythmia detection was increased by using collagen culture vessel. Conclusions: These results are expected to contribute to transplantation and drug discovery research as a 3D cardiac tissue model with a function similar to that of the living heart.

Given that many people suffer from large-area skin damage, skin regeneration is a matter of high concern. Here, an available method is developed for the formation of large-area robust skins through three stages: fabrication of a biodegradable sealant-loaded nanofiber scaffold (SNS), skin tissue reconstruction, and skin regeneration. First, a microfluidic blow-spinning strategy is proposed to fabricate a large-scale nanofiber scaffold with an area of 140 cm × 40 cm, composed of fibrinogen-loaded polycaprolactone/silk fibroin (PCL/SF) ultrafine core-shell nanofibers with mean diameter of 65 nm. Then, the SNS forms, where the gelling reaction of fibrin sealant occurs in situ between thrombin and fibrinogen on PCL/SF nanofiber surface, to promote the migration and proliferation of fibroblasts, accelerating skin regeneration. Through an in vivo study, it is shown that the SNS can rapidly repair acute tissue damage such as vascular bleeding and hepatic hemorrhage, and also promote angiogenesis, large-area abdominal wall defect repair, and wound tissue regeneration for medical problems in the world. Besides, it avoids the risk of immune rejection and secondary surgery in clinical applications. This strategy offers a facile route to regenerate large-scale robust skin, which shows great potential in abdominal wall defect repair., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)