Search

Biofilms are microbial aggregates encased in a matrix that is attached to biological or nonbiological surfaces and constitute serious problems in food, medical, and marine industries and can have major negative effects on both health and the economy. Biofilm's complex microbial community provides a resistant environment that is difficult to eradicate and is extremely resilient to antibiotics and sanitizers. There are various conventional techniques for combating biofilms, including, chemical removal, physical or mechanical removal, use of antibiotics and disinfectants to destroy biofilm producing organisms. In contrast to free living planktonic cells, biofilms are very resistant to these methods. Hence, new strategies that differ from traditional approaches are urgently required. Microbial world offers a wide range of effective "green" compounds such as biosurfactants. They outperform synthetic surfactants in terms of biodegradability, superior stabilization, and reduced toxicity concerns. They also have better antiadhesive and anti-biofilm capabilities which can be used to treat biofilm-related problems. Sophorolipids (SLs) are a major type of biosurfactants that have gained immense interest in the healthcare industries because of their antiadhesive and anti-biofilm properties. Sophorolipids may therefore prove to be attractive substances that can be used in biomedical applications as adjuvant to other antibiotics against some infections through growth inhibition and/or biofilm disruption., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Wound healing refers to the complex process of restoring the forms and functions of damaged tissues. Multiple growth factors and released cytokines tightly regulate the wound site. Healing processes can be disrupted by any alteration that would aggravate the damage and lengthen the repair process. Some of the conditions that may impair wound healing include infections and inflammation. Surfactants are amphiphilic compounds widely used in various formulations including detergents, food, pharmaceuticals and cosmetics. Biosurfactants, therefore, are surface-active compounds produced by biological agents, particularly yeast or bacteria, and represent a safer and environmentally preferred alternative to chemical surfactants. Numerous studies have targeted surface-active molecules as wound healing agents for their anti-inflammatory, antioxidant and antibacterial potential. This review focuses on surface-active molecules used in wound healing activities and analyses their effectiveness and mechanisms of action.

Aquatic habitats are particularly susceptible to chemical pollution, such as antimicrobials, from domestic, agricultural, and industrial sources. This has led to the rapid increase of antimicrobial resistance (AMR) gene prevalence. Alternate approaches to counteract pathogenic bacteria are in development including synthetic and biological surfactants such as sodium dodecyl sulfate (SDS) and rhamnolipids. In the aquatic environment, these surfactants may be present as pollutants with the potential to affect biofilm formation and AMR gene occurrence. We tested the effects of rhamnolipid and SDS on aquatic biofilms in a freshwater stream in Northern Ireland. We grew biofilms on contaminant exposure substrates deployed within the stream over 4 weeks. We then extracted DNA and carried out shotgun sequencing using a MinION portable sequencer to determine microbial community composition, with 16S rRNA analyses (64,678 classifiable reads identified), and AMR gene occurrence (81 instances of AMR genes over 9 AMR gene classes) through a metagenomic analysis. There were no significant changes in community composition within all systems; however, biofilm exposed to rhamnolipid had a greater number of unique taxa as compared to SDS treatments and controls. AMR gene prevalence was higher in surfactant-treated biofilms, although not significant, with biofilm exposed to rhamnolipids having the highest presence of AMR genes and classes compared to the control or SDS treatments. Our results suggest that the presence of rhamnolipid encourages an increase in the prevalence of AMR genes in biofilms produced in mixed-use water bodies., (© 2023 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.)

The terms discussed in this review-biosurfactants (BSs) and bioemulsifiers (BEs)-describe surface-active molecules of microbial origin which are popular chemical entities for many industries, including food. BSs are generally low-molecular-weight compounds with the ability to reduce surface tension noticeably, whereas BEs are high-molecular-weight molecules with efficient emulsifying abilities. Some other biomolecules, such as lecithin and egg yolk, are useful as natural BEs in food products. The high toxicity and severe ecological impact of many chemical-based surfactants have directed interest towards BSs/BEs. Interest in food surfactant formulations and consumer anticipation of "green label" additives over synthetic or chemical-based surfactants have been steadily increasing. BSs have an undeniable prospective for replacing chemical surfactants with vast significance to food formulations. However, the commercialization of BSs/BEs production has often been limited by several challenges, such as the optimization of fermentation parameters, high downstream costs, and low yields, which had an immense impact on their broader adoptions in different industries, including food. The foremost restriction regarding the access of BSs/BEs is not their lack of cost-effective industrial production methods, but a reluctance regarding their potential safety, as well as the probable microbial hazards that may be associated with them. Most research on BSs/BEs in food production has been restricted to demonstrations and lacks a comprehensive assessment of safety and risk analysis, which has limited their adoption for varied food-related applications. Furthermore, regulatory agencies require extensive exploration and analysis to secure endorsements for the inclusion of BSs/BEs as potential food additives. This review emphasizes the promising properties of BSs/BEs, trailed by an overview of their current use in food formulations, as well as risk and toxicity assessment. Finally, we assess their potential challenges and upcoming future in substituting chemical-based surfactants.

Surfactants are used to control microbial biofilms in industrial and medical settings. Their known toxicity on aquatic biota, and their longevity in the environment, has encouraged research on biodegradable alternatives such as rhamnolipids. While previous research has investigated the effects of biological surfactants on single species biofilms, there remains a lack of information regarding the effects of synthetic and biological surfactants in freshwater ecosystems. We conducted a mesocosm experiment to test how the surfactant sodium dodecyl sulfate (SDS) and the biological surfactant rhamnolipid altered community composition and metabolic activity of freshwater biofilms. Biofilms were cultured in the flumes using lake water from Lake Lunz in Austria, under high (300 ppm) and low (150 ppm) concentrations of either surfactant over a four-week period. Our results show that both surfactants significantly affected microbial diversity. Up to 36% of microbial operational taxonomic units were lost after surfactant exposure. Rhamnolipid exposure also increased the production of the extracellular enzymes, leucine aminopeptidase, and glucosidase, while SDS exposure reduced leucine aminopeptidase and glucosidase. This study demonstrates that exposure of freshwater biofilms to chemical and biological surfactants caused a reduction of microbial diversity and changes in biofilm metabolism, exemplified by shifts in extracellular enzyme activities. KEY POINTS: • Microbial biofilm diversity decreased significantly after surfactant exposure. • Exposure to either surfactant altered extracellular enzyme activity. • Overall metabolic activity was not altered, suggesting functional redundancy., (© 2022. The Author(s).)

A screening programme using mineral salt medium supplemented with n-hexadecane resulted in isolating a Bacillus megaterium SPSW1001 which was capable of producing surface active molecules lowering culture medium surface tension to 27.43 ± 0.029 mN/m and interfacial tension to 0.38 ± 0.03 mN/m at 72 h and an emulsification index (E 24 ) (85.63%). The biosurfactant product was further used to assess its effects on the rheological characteristics of water-in-oil emulsion prepared with engine oil. Structural characterization of the biosurfactant product by FTIR revealed a C-O-C stretch in sugar moiety and ester carbonyl linkage group between sugar and fatty acids, respectively, while mass spectral analysis revealed its glycolipid nature, with an m/z value of 662.44. The fluid behaviour of water-in-oil emulsion showed a non-Newtonian viscoelastic dilatant flow after yielding exemplified appropriately by Herschel-Bulkley model with 100% confidence of fit. The present study is significant in formulation and handling, processing, and transport of emulsion and in understanding flocculation characteristics., (© 2021. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

There are numerous biosurfactant producing strains and products reported annually most of which aspiring to potential future industrial and environmental applications. Only a few of these compounds have reached commercial applications due to many impediments to large-scale production and applications. We investigate some of the important criteria and investigations required to achieve such future commercial application., (© 2022. Springer Nature Switzerland AG.)

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Macromolecules are essential cellular components in biological systems responsible for performing a large number of functions that are necessary for growth and perseverance of living organisms. Proteins, lipids and carbohydrates are three major classes of biological macromolecules. To predict the structure, function, and behaviour of any cluster of macromolecules, it is necessary to understand the interaction between them and other components through basic principles of chemistry and physics. An important number of macromolecules are present in mixtures with surfactants, where a combination of hydrophobic and electrostatic interactions is responsible for the specific properties of any solution. It has been demonstrated that surfactants can help the formation of helices in some proteins thereby promoting protein structure formation. On the other hand, there is extensive research towards the use of surfactants to solubilize drugs and pharmaceuticals; therefore, it is evident that the interaction between surfactants with macromolecules is important for many applications which includes environmental processes and the pharmaceutical industry. In this review, we describe the properties of different types of surfactants that are relevant for their physicochemical interactions with biological macromolecules, from macromolecules-surfactant complexes to hydrophobic and electrostatic interactions.

Surface active agents (SAAs), currently used in modern industry, are synthetic chemicals produced from non-renewable sources, with potential toxic impacts on humans and the environment. Thus, there is an increased interest for the identification and utilization of natural derived SAAs. As such, the marine environment is considered a promising source of biosurfactants with low toxicity, environmental compatibility, and biodegradation compared to their synthetic counterparts. MARISURF is a Horizon 2020 EU-funded project aiming to identify and functionally characterize SAAs, derived from a unique marine bacterial collection, towards commercial exploitation. Specifically, rhamnolipids produced by Marinobacter MCTG107b and Pseudomonas MCTG214(3b1) strains were previously identified and characterized while currently their toxicity profile was assessed by utilizing well-established methodologies. Our results showed a lack of cytotoxicity in in vitro models of human skin and liver as indicated by alamar blue and propidium iodide assays. Additionally, the use of the single gel electrophoresis assay, under oxidative stress conditions, revealed absence of any significant mutagenic/anti-mutagenic potential. Finally, both 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonicacid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) cell-free assays, revealed no significant anti-oxidant capacity for neither of the tested compounds. Consequently, the absence of significant cytotoxicity and/or mutagenicity justifies their commercial exploitation and potential development into industrial end-user applications as natural and environmentally friendly biosurfactants.

The demand for microbially produced surface-active compounds for use in industrial processes and products is increasing. As such, there has been a comparable increase in the number of publications relating to the characterization of novel surface-active compounds: novel producers of already characterized surface-active compounds and production processes for the generation of these compounds. Leading researchers in the field have identified that many of these studies utilize techniques are not precise and accurate enough, so some published conclusions might not be justified. Such studies lacking robust experimental evidence generated by validated techniques and standard operating procedures are detrimental to the field of microbially produced surface-active compound research. In this publication, we have critically reviewed a wide range of techniques utilized in the characterization of surface-active compounds from microbial sources: identification of surface-active compound producing microorganisms and functional testing of resultant surface-active compounds. We have also reviewed the experimental evidence required for process development to take these compounds out of the laboratory and into industrial application. We devised this review as a guide to both researchers and the peer-reviewed process to improve the stringency of future studies and publications within this field of science., (© 2020 The Authors. Microbial Biotechnology published by Society for Applied Microbiology and John Wiley & Sons Ltd.)

Background: Microemulsions drug delivery systems (MDDS) have been known to increase the bioavailability of hydrophobic drugs. The main challenge of the MDDS is the development of an effective and safe system for drug carriage and delivery. Biosurfactants are preferred surface-active molecules because of their lower toxicity and safe characteristics when compared to synthetic surfactants. Glycolipid and lipopeptide are the most common biosurfactants that were tested for MDDS. The main goal of the present systematic review was to estimate the available evidence on the role of biosurfactant in the development of MDDS., Search Strategy: Literature searches involved the main scientific databases and were focused on the period from 2005 until 2017. The Search filter composed of two items: "Biosurfactant" and/or "Microemulsion.", Inclusion Criteria: Twenty-four studies evaluating the use of biosurfactant in MDDS were eligible for inclusion. Among these 14 were related to the use of glycolipid biosurfactants in the MDDS formulations, while four reported using lipopeptide biosurfactants and six other related review articles., Results: According to the output study parameters, biosurfactants acted as active stabilizers, hydrophilic or hydrophobic linkers and safety carriers in MDDS, and among them glycolipid biosurfactants had the most application in MDDS formulations., Conclusion: Synthetic surfactants could be replaced by biosurfactants as an effective bio-source for MDDS due to their excellent self-assembling and emulsifying activity properties., Competing Interests: The authors report no conflicts of interest in this work., (© 2020 Ohadi et al.)

Background: In comparison to synthetically derived surfactants, biosurfactants produced from microbial culture are generally regarded by industry as being more sustainable and possess lower toxicity. One major class of biosurfactants are rhamnolipids primarily produced by Pseudomonas aeruginosa. Due to its pathogenicity rhamnolipid synthesis by this species is viewed as being commercially nonviable, as such there is a significant focus to identify alternative producers of rhamnolipids., Results: To achieve this, we phenotypically screened marine bacteria for biosurfactant production resulting in the identification of rhamnolipid biosynthesis in a species belonging to the Marinobacter genus. Preliminary screening showed the strain to reduce surface tension of cell-free supernatant to 31.0 mN m -1 . A full-factorial design was carried out to assess the effects of pH and sea salt concentration for optimising biosurfactant production. When cultured in optimised media Marinobacter sp. MCTG107b produced 740 ± 28.3 mg L -1 of biosurfactant after 96 h of growth. Characterisation of this biosurfactant using both HPLC-MS and tandem MS showed it to be a mixture of different rhamnolipids, with di-rhamnolipid, Rha-Rha-C 10 -C 10 being the most predominant congener. The strain exhibited no pathogenicity when tested using the Galleria mellonella infection model., Conclusions: This study expands the paradigm of rhamnolipid biosynthesis to a new genus of bacterium from the marine environment. Rhamnolipids produced from Marinobacter have prospects for industrial application due to their potential to be synthesised from cheap, renewable feed stocks and significantly reduced pathogenicity compared to P. aeruginosa strains.

Burkholderia thailandensis E264 is a potential non-pathogenic substitute for producing rhamnolipid biosurfactant, replacing the pathogenic Pseudomonas aeruginosa. However, it has low rhamnolipid production and longer fermentation time. We have earlier suggested that media supplementation with exogenous quorum sensing (QS) molecules could lead to early onset of biosynthesis and increased rhamnolipid yield. Here, we assessed the effect of single, double or triple mutations in the various QS systems of B. thailandensis on rhamnolipid production, with the view to see which system(s) have the most impact on rhamnolipid yield and subsequently use the QS molecule to potentially increase yield in the wild-type B. thailandensis. The triple mutant strain had a rhamnolipid yield of 4.46 ± 0.345 g/l at 240 h of fermentation which was significantly higher than that of the wild type (0.94 ± 0.06 g/l), an unexpected outcome. To gain more insight as to how this might occur, we studied substrate metabolism and energy storage in the form of polyhydroxyalkanoate (PHA) by both the triple mutant and the wild type. We observed increased glycerol metabolism and reduced PHA production in the triple mutant compared with the wild type. Glycerol concentration at 240 h and maximum PHA productivity (g/gDCB) were 8.76 g/l or 16.19 g/l and 21.80% or 31.4% in either the triple mutant or the wild type respectively. Complementation of the triple-mutant cultures with exogenous QS molecules restored rhamnolipid production to similar levels as the wild type. QS therefore is a potential target for increased rhamnolipid production in B. thailandensis.

Synthetic surfactants are becoming increasingly unpopular in many applications due to previously disregarded effects on biological systems and this has led to a new focus on replacing such products with biosurfactants that are biodegradable and produced from renewal resources. Microbially derived biosurfactants have been investigated in numerous studies in areas including: increasing feed digestibility in an agricultural context, improving seed protection and fertility, plant pathogen control, antimicrobial activity, antibiofilm activity, wound healing and dermatological care, improved oral cavity care, drug delivery systems and anticancer treatments. The development of the potential of biosurfactants has been hindered somewhat by the myriad of approaches taken in their investigations, the focus on pathogens as source species and the costs associated with large-scale production. Here, we focus on various microbial sources of biosurfactants and the current trends in terms of agricultural and biomedical applications., (© 2019 The Society for Applied Microbiology.)

Background: Lactobacillus spp. predominantly shows its presence as a normal mucosal flora of the mouth and intestine. Therefore, the objective of our research is to investigate the in-vitro conditions for the prospective of medically valuable biosurfactants (BSs) derived from Lactobacillus spp. Biosurfactant (BS) obtained from Lactobacillus spp. exhibit antibiofilm and antiadhesive activity against broad range of microbes. In the present study we investigated the production, purification and properties of key components of the cell-associated-biosurfactant (CABS) from Lactobacillus acidophilus NCIM 2903., Results: Extracted, purified, freeze-dried CABS shows reduction in surface tension (SFT) of phosphate buffer saline (PBS @pH 7.0) from 71 to 26 mN/m and had a critical micelle concentration (CMC) of 23.6 mg/mL. The CABS showed reduction in interfacial tension (IFT) against various hydrocarbons and had effective spreading capability as reflected through the decrease in contact angle (CA) on different surfaces (polydimethylsiloxane - PDMS, Teflon tape, glass surface, polystyrene film and OHP sheet). The anionic nature of CABS displayed stability at different pH and temperatures and formed stable emulsions. Thin layer chromatography (TLC) and Fourier transform infrared spectroscopy (FTIR) revealed CABS as glycolipoprotein type. The Sodium Dodecyl Sulphate Polyacrylamide Gel Electrophoresis (SDS-PAGE) showed presence of multiple bands in a molecular range of 14.4 to 60 kDa, with prominent bands of 45 kDa. The CABS has significant antiadhesion and antibiofilm activity against tested bacterial strains., Conclusion: The current challenging situation is to develop methods or search for the molecules that will prevent the formations of biofilm on medical bioimplants of PDMS based materials. These findings are supportive for the use of Lactobacilli derived BS as potential antiadhesive agent on various surfaces of biomedical devices.

Optimising detergency at lower temperatures is of increasing interest due to environmental and economic factors, and requires a greater understanding of the effects of temperature on the adsorption of surfactant mixtures at interfaces. The adsorption properties of surfactant mixtures and biosurfactant/surfactant mixtures have been studied at room temperatures and at temperatures below ambient using surface tension and neutron reflectivity measurements. For the ternary surfactant mixture of octaethylene monododecyl ether, C 12 E 8 , sodium dodecyl 6-benzene sulfonate, LAS, and sodium dioxyethylene glycol monododecyl sulfate, SLES, the surface tension at the air-water interface increases with decreasing temperature. In contrast, there is a notable reduction in the increase in the surface tension with a decrease in temperature from 25 °C to 10 °C for the 5 component rhamnolipid/surfactant mixture of the mono-rhamnose, R1, and di-rhamnose, R2, with C 12 E 8 /LAS/SLES. The associated neutron reflectivity data for the ternary C 12 E 8 /LAS/SLES mixture and the significant observation is that the 3, 4, and 5-component mixtures containing rhamnolipids in conjunction with the other surfactants show changes in composition and adsorbed amounts of the individual components which are close to the experimental error. However the significant observation is that the neutron reflectivity data indicate that the improved surface tension tolerance at lower temperatures is associated with the dominance of the rhamnolipid adsorption in such mixtures. Hence the introduction of the rhamnolipids provides a tolerance to the adverse effects associated with reduced temperatures, and a potential for improved detergency at relatively low temperatures., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Surfactants and emulsifiers are surface-active compounds (SACs) which play an important role in various industrial processes and products due to their interfacial properties. Many of the chemical surfactants in use today are produced from non-renewable petrochemical feedstocks, while biosurfactants (BS) produced by microorganisms from renewable feedstocks are considered viable alternatives to petroleum based surfactants, due to their biodegradability and eco-friendly nature. However, some well-characterised BS producers are pathogenic and therefore, not appropriate for scaled-up production. Marine-derived BS have been found to be produced by non-pathogenic organisms making them attractive possibilities for exploitation in commercial products. Additionally, BS produced from marine bacteria may show excellent activity at extreme conditions (temperature, pH and salinity). Despite being non-pathogenic, marine-derived BS have not been exploited commercially due to their low yields, insufficient structural elucidation and uncharacterised genes. Therefore, optimization of BS production conditions in marine bacteria, characterization of the compounds produced as well as the genes involved in the biosynthesis are necessary to improve cost-efficiency and realise the industrial demands of SACs.

Aims: To investigate the capabilities of different types of biosurfactants (rhamnolipids, lipopeptides, sophorolipids) to remove metals and carbon from the hazardous spent hydrodesulphurization (HDS) catalyst generated by petroleum refineries., Methods and Results: Biosurfactants were prepared and used to treat spent HDS catalyst. Metal and carbon contents were analysed and compared with those from no-biosurfactant control treatments. All biosurfactant treatments increased carbon loss percentage from the spent HDS catalyst. The lipopeptide treatment LI, containing 17·34 mg ml -1 of crude biosurfactants, caused the highest carbon loss percentage (44·5%). Rhamnolipids were, in general, better than sophorolipids and lipopeptides as metal-removing agents. The metal content decreased as the concentration of rhamnolipids decreased. The R5 treatment, which contained 0·4 mg l -1 of crude rhamnolipids, caused the highest reduction in metal content. Molybdenum, nickle and vanadium contents were reduced by 90, 30 and 70% respectively., Conclusions: Biosurfactants might have potential application for metals and coke removal from spent HDS catalysts. The bioleaching capability depends on the type and concentration of the biosurfactant., Significance and Impact of the Study: This study, after further in-depth investigations, might lead to the development of an eco-friendly and economic technology to treat or even regenerate the environmentally hazardous spent HDS catalysts, which are generated in huge amounts by the petroleum refineries., (© 2018 The Society for Applied Microbiology.)

This study aimed to identify and characterise biosurfactant compounds produced by bacteria associated with a marine eukaryotic phytoplankton bloom. One strain, designated MCTG214(3b1), was isolated by enrichment with polycyclic aromatic hydrocarbons and based on 16S rDNA, and gyrB sequencing was found to belong to the genus Pseudomonas, however not related to P. aeruginosa. Cell-free supernatant samples of strain MCTG214(3b1) at stationary phase showed significant reductions in surface tension. HPLC-MS and NMR analysis of these samples indicated the presence of five different rhamnolipid (RL) congeners. Di-rhamnolipids accounted for 87% relative abundance and all congeners possessed fatty acid moieties consisting of 8-12 carbons. PCR screening of strain MCTG214(3b1) DNA revealed homologues to the P. aeruginosa RL synthesis genes rhlA and rhlB; however, no rhlC homologue was identified. Using the Galleria mellonella larvae model, strain MCTG214(3b1) was demonstrated to be far less pathogenic than P. aeruginosa. This study identifies for the first time a significantly high level of synthesis of short chain di-rhamnolipids by a non-pathogenic marine Pseudomonas species. We postulate that RL synthesis in Pseudomonas sp. MCTG214(3b1) is carried out by enzymes expressed from rhlA/B homologues similar to those of P. aeruginosa; however, a lack of rhlC potentially indicates the presence of a second novel rhamnosyltransferase responsible for the di-rhamnolipid congeners identified by HPLC-MS.

Washing is a rapid and effective treatment to remediate contaminated sands impacted by oil spills, although synthetic additives used to increase extraction efficiency may cause additional pollution issues due to their intrinsic toxicity and very often low biodegradability. In this study, different biogenic mobilizing agents (soybean lecithins, cyclodextrins, cholic acids, plant-derived cleaners, rhamnolipids and sophorolipids) were tested in the washing of beach sands artificially contaminated with the Intermediate Fuel Oil IFO-180. Among these, a de-oiled soybean lecithin (SL-1), hydroxypropyl-β-cyclodextrins (HPB-CD) and sophorolipids (SR) achieved hydrocarbon removals close to those attained with the synthetic surfactant Triton™ X-100 (TX) in preliminary washing tests carried out at constant mixing rate, water/sand ratio and IFO-180 contamination level using agents concentrations close to their critical micelle concentration (0.1% and 1% w/v for microbial and non-microbial agents, respectively). The effects of agent concentration, water/sand ratio, mixing rate and IFO-180 contamination on hydrocarbons removal were modelled using face-centred central composite design and ANOVA. Optimal washing parameters for sand contamination levels in the range 0.5-20 g/kg were identified with response surface methodology. While HPB-CD and SR performed equally to TX only at low sand contaminations, SL-1 attained hydrocarbon removal higher or equal to that of TX at any IFO-180 contamination and at lower application rates. SL-1 also outperformed TX when minimizing the water/sand ratio, i.e., the volume of water used. Considering its lower toxicity, higher biodegradability and higher hydrocarbon removal efficiencies, SL-1 is an effective and environmentally sustainable alternative to synthetic surfactants in washing treatments for marine fuel-contaminated sands., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Since 60-80% of total costs of production are usually associated with downstream collection, separation, and purification processes, it has become advantageous to investigate how to replace traditional methods with efficient and cost-effective alternative techniques for recovery and purification of biosurfactants. In the traditional techniques, large volumes of organic solvents are usually used for increasing production cost and the overall environmental burden. In addition, traditional production and separation methods typically carried out in batch cultures reduce biosurfactant yields due to product inhibition and lower biosurfactants activity as a result of interaction with the organic solvents used. However, some in situ recovery methods that allow continuous separation of bioproducts from culture broth leading to an improvement in yield production and fermentation efficiency. For biosurfactants commercialization, enhancement of product capacity of the separation methods and the rate of product removal is critical. Recently, interest in the integration of separation methods with a production step as rapid and efficient techniques has been increasing. This review focuses on the technology gains and potentials for the most common methods used in in situ product removal: foam fractionation and ultrafiltration, especially used to recover and purify two well-known biosurfactants: glycolipids (rhamnolipids) and lipopeptides (surfactins)., (© 2018 International Union of Biochemistry and Molecular Biology, Inc.)

Approximately 80% of the Earth's biosphere is cold, at an average temperature of 5°C, and is populated by a diversity of microorganisms that are a precious source of molecules with high biotechnological potential. Biosurfactants from cold-adapted organisms can interact with multiple physical phases - water, ice, hydrophobic compounds, and gases - at low and freezing temperatures and be used in sustainable (green) and low-energy-impact (cold) products and processes. We review the biodiversity of microbial biosurfactants produced in cold habitats and provide a perspective on the most promising future applications in environmental and industrial technologies. Finally, we encourage exploring the cryosphere for novel types of biosurfactants via both culture screening and functional metagenomics., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Aims: To assess the efficacy of rhamnolipid (mixture of monorhamnolipid and dirhamnolipid congeners), purified monorhamnolipid, dirhamnolipid and lactonic sophorolipid biosurfactants against pathogens important for oral hygiene., Methods and Results: Acquired and produced biosurfactants were fully characterized to allow the antimicrobial activity to be assigned to the biosurfactant congeners. Antimicrobial activity was assessed using the resazurin-aided microdilution method. Mixed rhamnolipid JBR425 (MR) and lactonic sophorolipids (LSLs) demonstrated the lowest minimum inhibitory concentration (MIC) which ranged between 100 and 400 μg ml -1 against Streptococcus mutans, Streptococcus oralis, Actinomyces naeslundii, Neisseria mucosa and Streptococcus sanguinis. Combining these biosurfactants with standard antimicrobial agents namely chlorhexidine, sodium lauryl sulphate, tetracycline HCl and ciprofloxacin showed a dramatic drop in the MIC values. In addition, in vitro studies demonstrated the biosurfactants' ability to prevent and disrupt oral pathogens biofilms. The increased permeability of microorganisms treated with biosurfactant, as shown using bisbenzimide dye, in part explains the inhibition effect., Conclusion: The results demonstrate that rhamnolipids and LSLs have the ability to inhibit oral pathogens both in planktonic and oral biofilm states., Significance and Impact of the Study: The findings indicate the potential value of biosurfactants for both oral hygiene and the pharmaceutical industries since there is a serious need to reduce the reliance on synthetic antimicrobials and antibiotics., (© 2017 The Society for Applied Microbiology.)

In this research we assess the feasibility of using palm oil agricultural refinery waste as a carbon source for the production of rhamnolipid biosurfactant through fermentation. The production and characterization of rhamnolipid produced by Pseudomonas aeruginosa PAO1 grown on palm fatty acid distillate (PFAD) under batch fermentation were investigated. Results show that P. aeruginosa PAO1 can grow and produce 0.43gL -1 of rhamnolipid using PFAD as the sole carbon source. Identification of the biosurfactant product using mass spectrometry confirmed the presence of monorhamnolipid and dirhamnolipid. The rhamnolipid produced from PFAD were able to reduce surface tension to 29mNm -1 with a critical micelle concentration (CMC) 420mgL -1 and emulsify kerosene and sunflower oil, with an emulsion index up to 30%. Results demonstrate that PFAD could be used as a low-cost substrate for rhamnolipid production, utilizing and transforming it into a value added biosurfactant product., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The self-assembly of dilute aqueous solutions of a ternary surfactant mixture and rhamnolipid biosurfactant/surfactant mixtures has been studied by small angle neutron scattering. In the ternary surfactant mixture of octaethylene glycol monododecyl ether, C 12 E 8 , sodium dodecyl 6-benzene sulfonate, LAS, and sodium dioxyethylene monododecyl sulfate, SLES, small globular interacting micelles are observed over the entire composition and concentration range studied. The modelling of the scattering data strongly supports the assumption that the micelle compositions are close to the solution compositions. In the 5-component rhamnolipid/surfactant mixture of the mono-rhamnose, R1, di-rhamnose, R2, rhamnolipids with C 12 E 8 /LAS/SLES, globular micelles are observed over much of the concentration and composition range studied. However, for solutions relatively rich in rhamnolipid and LAS, lamellar/micellar coexistence is observed. The transition from globular to more planar structures arises from a synergistic packing in the 5 component mixture. It is not observed in the individual components nor in the ternary C 12 E 8 /LAS/SLES mixture at these relatively low concentrations. The results provide an insight into how synergistic packing effects can occur in the solution self-assembly of complex multi-component surfactant mixtures, and give rise to an unexpected evolution in the phase behaviour., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Lactic acid bacteria are generally believed to have positive roles in maintaining good health and immune system in humans. A number of Lactobacilli spp. are known to produce important metabolites, among which biosurfactants in particular have shown antimicrobial activity against several pathogens in the intestinal tract and female urogenital tract partly through interfering with biofilm formation and adhesion to the epithelial cells surfaces. Around 46 reports are documented on biosurfactant production from Lactobacillus spp. of which six can be broadly classified as cell free biosurfactant and 40 as cell associated biosurfactants and only approximately 50% of those have reported on the structural composition which, in order of occurrence were mainly proteinaceous, glycolipidic, glycoproteins, or glycolipopeptides in nature. Due to the proteinaceous nature, most biosurfactant produced by strains of Lactobacillus are generally believed to be surlactin type with high potential toward impeding pathogens adherence. Researchers have recently focused on the anti-adhesive and antibiofilm properties of Lactobacilli-derived biosurfactants. This review briefly discusses the significance of Lactobacilli-derived biosurfactants and their potential applications in various fields. In addition, we highlight the exceptional prospects and challenges in fermentation economics of Lactobacillus spp.-derived biosurfactants' production processes., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Recent studies have indicated that biosurfactants play a role both in maintaining channels between multicellular structures in biofilms and in dispersal of cells from biofilms. A combination of caprylic acid (0.01 % v/v) together with rhamnolipids (0.04 % v/v) was applied to biofilms of Pseudomonas aeruginosa ATCC 15442, Staphylococcus aureus ATCC 9144 and a mixed culture under BioFlux flowthrough conditions and caused disruption of the biofilms. The biofilms were also treated with a combination of rhamnolipids (0.04 % v/v) and sophorolipids (0.01 %). Control treatments with PBS 1× had no apparent effect on biofilm disruption. The Gram-positive bacterium (S. aureus ATCC 9144) was more sensitive than P. aeruginosa ATCC 15442 in terms of disruption and viability as shown by Live/Dead staining. Disruption of biofilms of P. aeruginosa ATCC 15442 was minimal. Oxygen consumption by biofilms, after different treatments with biosurfactants, confirms that sophorolipid on its own is unable to kill/inhibit cells of P. aeruginosa ATCC 15442, and even when used in combination with rhamnolipids, under static conditions, no decrease in the cell viability was observed. Cells in biofilms exposed to mono-rhamnolipids (0.04 % v/v) showed behaviour typical of exposure to bacteriostatic compounds, but when exposed to di-rhamnolipids (0.04 % v/v), they displayed a pattern characteristic of bactericidal compounds.

Objectives: To develop and validate a microdilution method for measuring the minimum inhibitory concentration (MIC) of biosurfactants., Results: A standardized microdilution method including resazurin dye has been developed for measuring the MIC of biosurfactants and its validity was established through the replication of tetracycline and gentamicin MIC determination with standard bacterial strains., Conclusion: This new method allows the generation of accurate MIC measurements, whilst overcoming critical issues related to colour and solubility which may interfere with growth measurements for many types of biosurfactant extracts.

The aim of this work was to demonstrate the effectiveness of hydrolysis pretreatment of olive mill (OMW) waste before use as a carbon source in biosurfactant production by fermentation. Three hydrolysis methods were assessed: enzymatic hydrolysis, acid pretreatment plus enzymatic hydrolysis, and acid hydrolysis. Fermentation was carried out using two bacterial species: Pseudomonas aeruginosa and Bacillus subtilis. Our results showed that the enzymatic hydrolysis was the best pretreatment, yielding up to 29.5 and 13.7mg/L of rhamnolipids and surfactins respectively. Glucose did not show significant differences in comparison to enzymatically hydrolysed OMW. At the best conditions found rhamnolipids and surfactins reached concentrations of 299 and 26.5mg/L; values considerably higher than those obtained with non-hydrolysed OMW. In addition, enzymatic pretreatment seemed to partially reduce the inhibitory effects of OMW on surfactin production. Therefore, enzymatic hydrolysis proved to effectively increase the productivity of these biosurfactants using OMW as the sole carbon source., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Aims: To establish the ability of the rhamnolipids biosurfactants from Pseudomonas aeruginosa, in the presence and absence of caprylic acid and ascorbic acid, to disrupt bacterial biofilms, compared with the anionic alkyl sulphate surfactant Sodium dodecyl sulphate (SDS)., Methods and Results: Pseudomonas aeruginosa ATCC 15442 biofilms were disrupted by rhamnolipids at concentrations between 0·5 and 0·4 g l(-1) and with SDS at 0·8 g l(-1) . The combination of rhamnolipids 0·4 g l(-1) and caprylic acid at 0·1 g l(-1) showed a remarkable effect on biofilm disruption and cell killing. After 30 min of treatment most of the biofilm was disrupted and cell viability was significantly reduced. Neither caprylic acid nor ascorbic acid has any effect on biofilm disruption at 0·1 g l(-1) . SDS is an effective antimicrobial agent; however, in the presence of caprylic acid its effect was neutralized., Conclusions: The results show that rhamnolipids at low concentration in the presence of caprylic acid are promising molecules for inhibition/disruption of biofilms formed by Ps. aeruginosa ATCC 15442., Significance and Impact of the Study: The disruption of biofilms has major significance in many industrial and domestic cleaning applications and in medical situations., (© 2016 The Society for Applied Microbiology.)

The antibacterial properties and ability to disrupt biofilms of biosurfactants (rhamnolipids, sophorolipids) and sodium dodecyl sulphate (SDS) in the presence and absence of selected organic acids were investigated. Pseudomonas aeruginosa PAO1 was inhibited by sophorolipids and SDS at concentrations >5% v/v, and the growth of Escherichia coli NCTC 10418 was also inhibited by sophorolipids and SDS at concentrations >5% and 0.1% v/v, respectively. Bacillus subtilis NCTC 10400 was inhibited by rhamnolipids, sophorolipids and SDS at concentrations >0.5% v/v of all three; the same effect was observed with Staphylococcus aureus ATCC 9144. The ability to attach to surfaces and biofilm formation of P. aeruginosa PAO1, E. coli NCTC 10418 and B. subtilis NCTC 10400 was inhibited by sophorolipids (1% v/v) in the presence of caprylic acid (0.8% v/v). In the case of S. aureus ATCC 9144, the best results were obtained using caprylic acid on its own. It was concluded that sophorolipids are promising compounds for the inhibition/disruption of biofilms formed by Gram-positive and Gram-negative microorganisms and this activity can be enhanced by the presence of booster compounds such as caprylic acid., (© FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Microbial growth and biofilms formation are a continuous source of contamination on most surfaces with biological, inanimate, natural or man-made. The use of chemical surfactants in daily practice to control growth, presence or adhesion of microorganisms and ultimately the formation of biofilms and biofouling is therefore becoming essential. Synthetic surfactants are, however, not preferred or ideal and biologically derived surface active biosurfactants (BSs) molecules produced mainly by microorganisms are therefore becoming attractive and sought by many industries. The search for innovative and interesting BS molecules that have effective antimicrobial activities and to use as innovative alternatives to chemical surfactants with added antimicrobial value among many other advantages has been ongoing for some time. This review discusses the various roles of BS molecules in association with biofilm formation. Recent updates on several mechanisms involved in biofilm development and control are presented vide this article.

Biosurfactants are amphipathic, surface-active molecules of microbial origin which accumulate at interfaces reducing interfacial tension and leading to the formation of aggregated micellular structures in solution. Some biosurfactants have been reported to have antimicrobial properties, the ability to prevent adhesion and to disrupt biofilm formation. We investigated antimicrobial properties and biofilm disruption using sophorolipids at different concentrations. Growth of Gram negative Cupriavidus necator ATCC 17699 and Gram positive Bacillus subtilis BBK006 were inhibited by sophorolipids at concentrations of 5% v/v with a bactericidal effect. Sophorolipids (5% v/v) were also able to disrupt biofilms formed by single and mixed cultures of B. subtilis BBK006 and Staphylococcus aureus ATCC 9144 under static and flow conditions, as was observed by scanning electron microscopy. The results indicated that sophorolipids may be promising compounds for use in biomedical application as adjuvants to other antimicrobial against some pathogens through inhibition of growth and/or biofilm disruption., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Current microbial inhibition strategies based on planktonic bacterial physiology have been known to have limited efficacy on the growth of biofilm communities. This problem can be exacerbated by the emergence of increasingly resistant clinical strains. All aspects of biofilm measurement, monitoring, dispersal, control, and inhibition are becoming issues of increasing importance. Biosurfactants have merited renewed interest in both clinical and hygienic sectors due to their potential to disperse microbial biofilms in addition to many other advantages. The dispersal properties of biosurfactants have been shown to rival those of conventional inhibitory agents against bacterial and yeast biofilms. This makes them suitable candidates for use in new generations of microbial dispersal agents and for use as adjuvants for existing microbial suppression or eradication strategies. In this review, we explore aspects of biofilm characteristics and examine the contribution of biologically derived surface-active agents (biosurfactants) to the disruption or inhibition of microbial biofilms.

Current antibiofilm solutions based on planktonic bacterial physiology have limited efficacy in clinical and occasionally environmental settings. This has prompted a search for suitable alternatives to conventional therapies. This study compares the inhibitory properties of two biological surfactants (rhamnolipids and a plant-derived surfactant) against a selection of broad-spectrum antibiotics (ampicillin, chloramphenicol and kanamycin). Testing was carried out on a range of bacterial physiologies from planktonic and mixed bacterial biofilms. Rhamnolipids (Rhs) have been extensively characterised for their role in the development of biofilms and inhibition of planktonic bacteria. However, there are limited direct comparisons with antimicrobial substances on established biofilms comprising single or mixed bacterial strains. Baseline measurements of inhibitory activity using planktonic bacterial assays established that broad-spectrum antibiotics were 500 times more effective at inhibiting bacterial growth than either Rhs or plant surfactants. Conversely, Rhs and plant biosurfactants reduced biofilm biomass of established single bacterial biofilms by 74-88 and 74-98 %, respectively. Only kanamycin showed activity against biofilms of Bacillus subtilis and Staphylococcus aureus. Broad-spectrum antibiotics were also ineffective against a complex biofilm of marine bacteria; however, Rhs and plant biosurfactants reduced biofilm biomass by 69 and 42 %, respectively. These data suggest that Rhs and plant-derived surfactants may have an important role in the inhibition of complex biofilms.

Microbial biosurfactants with high ability to reduce surface and interfacial surface tension and conferring important properties such as emulsification, detergency, solubilization, lubrication and phase dispersion have a wide range of potential applications in many industries. Significant interest in these compounds has been demonstrated by environmental, bioremediation, oil, petroleum, food, beverage, cosmetic and pharmaceutical industries attracted by their low toxicity, biodegradability and sustainable production technologies. Despite having significant potentials associated with emulsion formation, stabilization, antiadhesive and antimicrobial activities, significantly less output and applications have been reported in food industry. This has been exacerbated by uneconomical or uncompetitive costing issues for their production when compared to plant or chemical counterparts. In this review, biosurfactants properties, present uses and potential future applications as food additives acting as thickening, emulsifying, dispersing or stabilising agents in addition to the use of sustainable economic processes utilising agro-industrial wastes as alternative substrates for their production are discussed., (© 2013 American Institute of Chemical Engineers.)

A range of isolates of Pseudomonas aeruginosa from widely different environmental sources were examined for their ability to synthesise rhamnolipid biosurfactants. No significant differences in the quantity or composition of the rhamnolipid congeners could be produced by manipulating the growth conditions. Sequences for the rhamnolipid genes indicated low levels of strain variation, and the majority of polymorphisms did lead to amino acid sequence changes that had no evident phenotypic effect. Expression of the rhlB and rhlC rhamnosyltransferase genes showed a fixed sequential expression pattern during growth, and no significant up-regulation could be induced by varying producer strains or growth media. The results indicated that rhamnolipids are highly conserved molecules and that their gene expression has a rather stringent control. This leaves little opportunity to manipulate and greatly increase the yield of rhamnolipids from strains of P. aeruginosa for biotechnological applications.

The impact of Ca(2+) counterions on the adsorption at the air-water interface and self-assembly in aqueous solution of the rhamnolipid biosurfactant and its mixture with the anionic surfactant sodium dodecylbenzenesulfonate, LAS, has been studied using neutron reflectometry and small-angle neutron scattering. The results illustrate how rhamnolipids are calcium tolerant and how their blending with conventional anionic surfactants improves the calcium tolerance of the anionic surfactant. Ca(2+) has relatively little effect upon the adsorption and self-assembly of the monorhamnose, R1, and dirhamnose, R2, rhamnolipids, even at high pH, due to their predominantly nonionic nature. For R1/R2 mixtures the addition of Ca(2+) has little impact upon the adsorbed amount or the surface composition. For R2/LAS mixtures the addition of Ca(2+) results in an increased adsorption and a surface slightly richer in R2. The weak binding of Ca(2+) to R1 and R2 does result in a change to the degree of ionization of the micelles and especially for mixed R1/R2 micelles at R1-rich solution compositions. The stronger binding of Ca(2+) to LAS results in the addition of Ca(2+) having a much greater impact on the self-assembly of R1/LAS and R2/LAS mixtures. For R1/LAS mixtures the addition of Ca(2+) promotes the formation of more planar structures, even at low surfactant concentrations where in the absence of Ca(2+) mixed globular micelle formation dominates. In R2/LAS mixtures, where there is a greater contrast between the high and low preferred curvatures associated with R2 and LAS, the addition of Ca(2+) results in a more complex evolution in micellar aggregation and the degree of ionization of the micelles. This results in variations in Ca(2+) binding that promotes micellar structures in which a spatial segregation of the two surfactant components within the micelle occurs.

The drive for industrial sustainability has pushed biosurfactants to the top of the agenda of many companies. Biosurfactants offer the possibility of replacing chemical surfactants, produced from nonrenewable resources, with alternatives produced from cheap renewable feedstocks. Biosurfactants are also attractive because they are less damaging to the environment yet are robust enough for industrial use. The most promising biosurfactants at the present time are the glycolipids, sophorolipids produced by Candida yeasts, mannosylerythritol lipids (MELs) produced by Pseudozyma yeasts, and rhamnolipids produced by Pseudomonas. Despite the current enthusiasm for these compounds several residual problems remain. This review highlights remaining problems and indicates the prospects for imminent commercial exploitation of a new generation of microbial biosurfactants., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Glycolipid biosurfactants produced by bacteria and yeasts provide significant opportunities to replace chemical surfactants with sustainable biologically produced alternatives in bulk commercial products such as laundry detergents and surface cleaners. Sophorolipids are already available in sufficient yield to make their use feasible while rhamnolipids and mannosylerythritol lipids require further development. The ability to tailor the biosurfactant produced to the specific needs of the product formulation will be an important future step.

The self-assembly in aqueous solution of the acidic (AS) and lactonic (LS) forms of the sophorolipid biosurfactant, their mixtures, and their mixtures with anionic surfactant sodium dodecyl benzene sulfonate, LAS, has been studied using predominantly small-angle neutron scattering, SANS, at relatively low surfactant concentrations of <30 mM. The more hydrophobic lactonic sophorolipid forms small unilamellar vesicles at low surfactant concentrations, in the concentration range of 0.2 to 3 mM, and transforms via a larger unilamellar vesicle structure at 7 mM to a disordered dilute phase of tubules at higher concentrations, 10 to 30 mM. In marked contrast, the acidic sophorolipid is predominantly in the form of small globular micelles in the concentration range of 0.5 to 30 mM, with a lower concentration of larger, more planar aggregates (lamellar or vesicular) in coexistence. In mixtures of AS and LS, over the same concentration range, the micellar structure associated with the AS sophorolipid dominates the mixed-phase behavior. In mixtures of anionic surfactant LAS with the AS sophorolipid, the globular micellar structure dominates over the entire composition and concentration range studied. In contrast, mixtures of LAS with the LS sophorolipid exhibit a rich evolution in phase behavior with solution composition and concentration. At low surfactant concentrations, the small unilamellar vesicle structure present for LS-rich solution compositions evolves into a globular micelle structure as the solution becomes richer in LAS. At higher surfactant concentrations, the disordered lamellar structure present for LS-rich compositions transforms to small vesicle/lamellar coexistence, to lamellar/micellar coexistence, to micellar/lamellar coexistence, and ultimately to a pure micellar phase as the solution becomes richer in LAS. The AS sophorolipid surfactant exhibits self-assembly properties similar to those of most other weakly ionic or nonionic surfactants that have relatively large headgroups. However, the more hydrophobic nature of the lactonic sophorolipid results in a more complex and unusual evolution in phase behavior with concentration and with concentration and composition when mixed with anionic surfactant LAS.

The adsorption of the lactonic (LS) and acidic (AS) forms of sophorolipid and their mixtures with the anionic surfactant sodium dodecyl benzene sulfonate (LAS) has been measured at the air/water interface by neutron reflectivity, NR. The AS and LS sophorolipids adsorb with Langmuir-like adsorption isotherms. The more hydrophobic LS is more surface active than the AS, with a lower critical micellar concentration, CMC, and stronger surface adsorption, with an area/molecule ∼70 Å(2) compared with 85 Å(2) for the AS. The acidic sophorolipid shows a maximum in its adsorption at the CMC which appears to be associated with a mixture of different isomeric forms. The binary LS/AS and LS/LAS mixtures show a strong surface partitioning in favor of the more surface active and hydrophobic LS component but are nevertheless consistent with ideal mixing at the interface. In contrast, the surface composition of the AS/LAS mixture is much closer to the solution composition, but the surface mixing is nonideal and can be accounted for by regular solution theory, RST. In the AS/LS/LAS ternary mixtures, the surface adsorption is dominated by the sophorolipid, and especially the LS component, in a way that is not consistent with the observations for the binary mixtures. The extreme partitioning in favor of the sophorolipid for the LAS/LS/AS (1:2) mixtures is attributed to a reduction in the packing constraints at the surface due to the AS component. Measurements of the surface structure reveal a compact monolayer for LS and a narrow solvent region for LS, LS/AS, and LS/LAS mixtures, consistent with the more hydrophobic nature of the LS component. The results highlight the importance of the relative packing constraints on the adsorption of multicomponent mixtures, and the impact of the lactonic form of the sophorolipid on the adsorption of the sophorolipid/LAS mixtures.

Lactobacillus delbrueckii cultured with peanut oil cake as the carbon source yielded 5.35 mg ml(-1) of biosurfactant production. Five sets of microcosm biodegradation experiments were carried out with crude oil as follows: set 1 - bacterial cells+crude oil, set 2 - bacterial cells+crude oil+fertilizer, set 3 - bacterial cells+crude oil+biosurfactant, set 4 - bacterial cells+crude oil+biosurfactant+fertilizer, set 5 - with no bacterial cells, fertilizer and biosurfactant (control). Maximum degradation of crude oil was observed in set 4 (75%). Interestingly, when biosurfactant and bacterial cells were used (set 3), significant oil biodegradation activity occurred and the difference between this treatment and that in set 4 was 7% higher degradation level in microcosm experiments. It is evident from the results that biosurfactants alone is capable of promoting biodegradation to a large extent without added fertilizers., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

This study was conducted to investigate the effects of fertilizers and biosurfactants on biodegradation of crude oil by three marine bacterial isolates; Bacillus megaterium, Corynebacterium kutscheri and Pseudomonas aeruginosa. Five sets of experiments were carried out in shake flask and microcosm conditions with crude oil as follows: Set 1-only bacterial cells added (no fertilizer and biosurfactant), Set 2-with additional fertilizer only, Set 3-with additional biosurfactant only, Set 4-with added biosurfactant+fertilizer, Set 5-with no bacterial cells added (control), all the above experimental sets were incubated for 168 h. The biosurfactant+fertilizer added Set 4, resulted in maximum crude oil degradation within shake flask and microcosm conditions. Among the three bacterial isolates, P. aeruginosa and biosurfactant produced by this strain resulted in maximum crude oil degradation compared to the other two bacterial strains investigated. Interestingly, when biosurfactant and bacterial cells were used (Set 3), significant oil biodegradation activity occurred and the difference between this treatment and that in Set 4 with added fertilizer+biosurfactant were only 4-5% higher degradation level in shake flask and 3.2-7% in microcosm experiments for all three bacterial strains used. It is concluded that, biosurfactants alone capable of promoting biodegradation to a large extent without added fertilizers, which will reduce the cost of bioremediation process and minimizes the dilution or wash away problems encountered when water soluble fertilizers used during bioremediation of aquatic environments., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

The use of small angle neutron scattering, SANS, neutron reflectivity, NR, and surface tension to study the mixing properties of the biosurfactant rhamnolipid with a conventional anionic surfactant, sodium dodecyl 6-benzene sulfonate, LAS, is reported. The monorhamnose rhamnolipid, R1, mixes close to ideally with LAS at the air-water interface, whereas for mixtures of LAS with the dirhamnose rhamnolipid, R2, the LAS strongly partitions to the air-water interface relative to R2, probably because of the steric hindrance of the larger R2 headgroup. These trends in the binary mixtures are also reflected in the ternary R1/R2/LAS mixtures. However, for these ternary mixtures, there is also a pronounced synergy in the total adsorption, which reaches a maximum for a LAS/rhamnolipid mole ratio of about 0.6 and a R1/R2 mol ratio of about 0.5, an effect which is not observed in the binary mixtures. In solution, the R1/LAS mixtures form relatively small globular micelles, L(1), at low surfactant concentrations (<20 mM), more planar structures (lamellar, L(α), unilamellar/multilamellar vesicles, ulv/mlv) are formed at higher surfactant concentrations for R1 and LAS rich compositions, and a large mixed phase (L(α)/L(1) and L(1)/L(α)) region forms at intermediate surfactant compositions. In contrast, for the R2/LAS mixtures, the higher preferred curvature of R2 dominates the phase behavior. The predominant microstructure is in the form of small globular micelles, except for solution compositions rich in LAS (>80 mol % LAS) where more planar structures are formed. For the ternary mixtures, there is an evolution in the resulting phase behavior from one dominated by L(1) (R2 rich) to one dominated by planar structures, L(α), (R1, LAS rich), and which strongly depends upon the LAS/rhamnolipid and R1/R2 mole ratio.

Marine biosphere offers wealthy flora and fauna, which represents a vast natural resource of imperative functional commercial grade products. Among the various bioactive compounds, biosurfactant (BS)/bioemulsifiers (BE) are attracting major interest and attention due to their structural and functional diversity. The versatile properties of surface active molecules find numerous applications in various industries. Marine microorganisms such as Acinetobacter, Arthrobacter, Pseudomonas, Halomonas, Myroides, Corynebacteria, Bacillus, Alteromonas sp. have been studied for production of BS/BE and exopolysaccharides (EPS). Due to the enormity of marine biosphere, most of the marine microbial world remains unexplored. The discovery of potent BS/BE producing marine microorganism would enhance the use of environmental biodegradable surface active molecule and hopefully reduce total dependence or number of new application oriented towards the chemical synthetic surfactant industry. Our present review gives comprehensive information on BS/BE which has been reported to be produced by marine microorganisms and their possible potential future applications.

Deuterated rhamnolipids were produced using strain AD7 of Pseudomonas aeruginosa, which was progressively adapted to increasing levels of deuterium in D(2)O and carbon substrates. Fourteen different deuterated rhamnolipid structures, including structural isomers, were produced which is similar to normal protonated structures. There were two main products monorhamnolipid Rha-C(10)-C(10) and dirhamnolipid Rha(2)-C(10)-C(10). The levels of deuteration varied from 16% with 25% D(2)O + h-glycerol to 90% with 100% D(2)O + d-glycerol. When d-tetradecane was used with H(2)O, virtually all the deuterium appeared in the lipid chains while using h-tetradecane + D(2)O led to the majority of deuterium in the sugars. The adaptation to growth in deuterium appeared to be metabolic since no genetic changes could be found in the key rhamnolipid biosynthetic genes, the rhamnosyl transferases RhlB and RhlC. Deuterated sophorolipids were similarly produced using Candida bombicola and Candida apicola although in this case, no adaptation process was necessary. Up to 40 different sophorolipids were produced by these yeasts. However, unlike the rhamnolipids, use of D(2)O did not lead to any deuteration of the lipid chains, but direct incorporation into the lipid was achieved using d-isostearic acid. The results from these experiments show the feasibility of producing deuterated bioactive compounds from microorganisms coupled with the possibility of manipulating the pattern of labelling through judicious use of different deuterated substrates.

Microorganisms synthesise a wide range of surface-active compounds (SAC), generally called biosurfactants. These compounds are mainly classified according to their molecular weight, physico-chemical properties and mode of action. The low-molecular-weight SACs or biosurfactants reduce the surface tension at the air/water interfaces and the interfacial tension at oil/water interfaces, whereas the high-molecular-weight SACs, also called bioemulsifiers, are more effective in stabilising oil-in-water emulsions. Biosurfactants are attracting much interest due to their potential advantages over their synthetic counterparts in many fields spanning environmental, food, biomedical, and other industrial applications. Their large-scale application and production, however, are currently limited by the high cost of production and by limited understanding of their interactions with cells and with the abiotic environment. In this paper, we review the current knowledge and the latest advances in biosurfactant applications and the biotechnological strategies being developed for improving production processes and future potential.

Tensioactive properties of rhamnolipids produced by a Pseudomonas aeruginosa strain were investigated in the presence or absence of Sr(2+) or Pb(2+). Surface and interfacial properties, and aggregate forming properties and morphologies were studied by various techniques including scanning electron microscopy. When the pH of a rhamnolipid aqueous solution (40 mg/l) was increased from 5 to 8, irregular vesicles gradually took the shape of oligo-vesicles, then regular vesicles and finally smaller spherical vesicles. Addition of metal ions controlled the aggregates' morphology and stability, and influenced the surface and interfacial behavior of rhamnolipid solutions.