Search

According to the molecular properties of non-steroidal anti-inflammatory drugs (NSADs), a new adsorbent for magnetic solid phase extraction (MSPE) was designed and synthesized. Triethyl-(4-vinylbenzyl)aminium chloride and 4-vinylbenzeneboronic acid were utilized as dual functional monomers to copolymerize with divinylbenzene on the surface of pre-modified Fe 3 O 4 nanoparticles. The prepared magnetic adsorbent (Fe 3 O 4 @TCVA) was characterized by elemental analysis, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometer. Due to the abundant boronic acid, quaternary amine and phenyl groups, the Fe 3 O 4 @TCVA displayed satisfactory extraction performance for target NSADs (diclofenac acid, ibuprofen and mefenamic acid) by means of B-N coordination, anion-exchange, π-π and hydrophobic interactions. Under the optimized conditions, the Fe 3 O 4 @TCVA/MSPE was combined with high-performance liquid chromatography with diode array detection (HPLC-DAD) to sensitively analyze NSADs in water and human urine samples. Results indicated that the limits of detection for water and urine samples were in the ranges of 0.014-0.031 μg/L and 0.029-0.11 μg/L, respectively. The relative standard deviations for the intra-day and inter-day assay variability were below 10%. The applicability of the proposed Fe 3 O 4 @TCVA/MSPE-HPLC-DAD method was demonstrated by the successful extraction and quantification of trace levels of NSADs in real water and human urine samples. Satisfactory spiked recovery and reproducibility were achieved., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Polymer monolith microextraction (PMME) based on capillary monolithic column is an effective and useful technique to preconcentrate trace analytes from environmental and biological samples. Here, we report the fabrication of a novel aluminum terephthalate metal-organic framework (MIL-53(Al)) incorporated capillary monolithic column via in situ polymerization for the PMME of non-steroidal anti-inflammatory drugs (NSAIDs) (ketoprofen, fenbufen and ibuprofen) in water and urine samples. The fabricated MIL-53(Al) incorporated monolith was characterized by X-ray powder diffractometry, scanning electron microscopy, Fourier transform infrared spectrometry, and nitrogen adsorption experiment. The MIL-53(Al) incorporated monolith gave larger surface area than the neat polymer monolith. A 2-cm long MIL-53(Al) incorporated capillary monolith was applied for PMME coupled with high-performance liquid chromatography for the determination of the NSAIDs. Potential factors affecting the PMME were studied in detail. Under the optimized conditions, the developed method gave the enhancement factors of 46-51, the linear range of 0.40-200μgL(-1), the detection limits (S/N=3) of 0.12-0.24μgL(-1), and the quantification limits (S/N=10) of 0.40-0.85μgL(-1). The recoveries for spiked NSAIDs (20μgL(-1)) in water and urine samples were in the range of 77.3-104%. Besides, the MIL-53(Al) incorporated monolith was stable enough for 120 extraction cycles without significant loss of extraction efficiency. The developed method was successfully applied to the determination of NSAIDs in water and urine samples., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A new dendrimer-functionalized mesoporous silica material based on large-pore 3D cubic Korea Advanced Institute of Science and Technology-6 (KIT-6) was synthesized by the growing of dendritic branches inside the mesopores of aminopropyl functionalized KIT-6. Detailed physical characterizations using transmission electron microscopy, nitrogen adsorption-desorption measurements, Fourier transform infrared (FTIR) spectroscopy, and elemental analysis reveal that the multifunctional dendrimers have been grown successfully within the confined spaces of mesopores. Although the 3D ordered mesoporous architecture of KIT-6 was well preserved, there was a significant and continuous decrease in pore size, specific surface area (SBET) and pore volume when increasing dendrimer generation up to six. In order to get a compromise between the SBET, pore size and density of functionalities, the dendrimer-functionalized KIT-6 (DF-KIT-6) for generation 2 (SBET, 314.2 m(2) g(-1); pore size, 7.9 nm; carbon and nitrogen contents, 19.80% and 1.92%) was selected for solid phase extraction (SPE) applications. The DF-KIT-6 was then evaluated as a reversed-phase/anion-exchange mixed-mode sorbent for extraction of the selected acidic drugs (ketoprofen, KEP; naproxen, NAP; and ibuprofen, IBU), since the dendrimers contained both hydrocarbonaceous and amine functionalities. The effective parameters on extraction efficiency such as sample pH and volume, type and volume of eluent and wash solvents were optimized. Under the optimized experimental conditions, the DF-KIT-6 based SPE coupled with HPLC-UV method demonstrated good sensitivity (0.4-4.6 ng mL(-1) detection of limits) and linearity (R(2)>0.990 for 10-2000 ng mL(-1) of KEP and IBU, and 1-200 ng mL(-1) of NAP). The potential use of DF-KIT-6 sorbent for preconcentration and cleanup of acid drugs in human urine samples was also demonstrated. Satisfactory recoveries at two spiking levels (30 and 300 ng mL(-1) for KEP and IBU, 3 and 30 ng mL(-1) for NAP) were obtained in the range of 85.7-113.9% with RSD values below 9.3% (n=3)., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Solid-phase extraction and column-trapping preconcentration are combined to enhance HPLC-nuclear magnetic resonance (HPLC-NMR) and applied to metabolite profiling in biological samples. Combining the two signal enhancement techniques improved the NMR signal substantially such that we were able to identify 2-hydroxyibuprofen, carboxyibuprofen, and unmetabolized ibuprofen molecules from a small urine sample after a therapeutic dose of ibuprofen. The hyphenated SPE/column-trapping method resulted in an excellent overall signal enhancement of up to 90-fold.