Search

A multi‐stage core‐expansion method is proposed here as one component of the integrative binding‐site/extender/core‐expansion (BEC) strategy. The conceptual deconstruction of the partitioning ligand into three editable parts draws our focus onto progressive core expansion and allows the optimization of both acetylene uptake and selectivity. The effectiveness of this strategy is shown through a family of eight cationic pore‐partitioned materials containing three different partitioning ligands and various counter anions. The optimized structure, Co3‐cpt‐tph‐Cl (Hcpt=4‐(p‐carboxyphenyl)‐1,2,4‐triazole, H‐tph=(2,5,8‐tri‐(4‐pyridyl)‐1,3,4,6,7,9‐hexaazaphenalene) with the largest surface area and highest C2H2 uptake capacity (200 cm3/g at 298 K), also exhibits (desirably) the lowest CO2 uptake and hence the highest C2H2/CO2 selectivity. The successful boost in both C2H2 capacity and IAST selectivity allows Co3‐cpt‐tph‐Cl to rank among the best crystalline porous materials, ionic MOFs in particular, for C2H2 uptake and C2H2/CO2 experimental breakthrough separation. [ABSTRACT FROM AUTHOR]

We report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8‐tri‐(4‐pyridyl)‐1,3,4,6,7,9‐hexaazaphenalene, H‐tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni3‐bdt‐tph (bdt=1,4‐benzeneditetrazolate) exhibits month‐long water stability, while CoV‐bdt‐tph sets a new benchmark for C2H2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in‐framework modules, we show feasibility to tune the type and concentration of extra‐framework counter cations and their influence on both stability and capability to separate industrial C3H8/C3H6 and C6H6/C6H12 mixtures. [ABSTRACT FROM AUTHOR]

Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co2V‐pacs MOFs exhibit near or at record high uptake capacities for C2H2, C2H4, C2H6, and CO2 among MOFs. The storage capacity of C2H2 is 234 cm3 g−1 (298 K) and 330 cm3 g−1 (273 K) at 1 atm for CPM‐733‐dps (the Co2V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C2H2 adsorption capacity following multiple adsorption–desorption cycles. [ABSTRACT FROM AUTHOR]

Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co2V‐pacs MOFs exhibit near or at record high uptake capacities for C2H2, C2H4, C2H6, and CO2 among MOFs. The storage capacity of C2H2 is 234 cm3 g−1 (298 K) and 330 cm3 g−1 (273 K) at 1 atm for CPM‐733‐dps (the Co2V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C2H2 adsorption capacity following multiple adsorption–desorption cycles. [ABSTRACT FROM AUTHOR]

The introduction of a symmetry‐ and size‐matching pore‐partitioning agent in the form of either a molecular ligand, such as 2,4,6‐tri(4‐pyridinyl)‐1,3,5‐triazine (tpt), or a metal‐complex cluster, into the hexagonal channels of MIL‐88/MOF‐235‐type (the acs net) to create pacs‐type (partitioned acs) crystalline porous materials is an effective strategy to develop high‐performance gas adsorbents. We have developed an integrated COF–MOF coassembly strategy as a new method for pore‐space partitioning through the coassembly of [(M3(OH)1−x(O)x(COO)6] MOF‐type and [B3O3(py)3] COF‐type trimers. With this strategy, the coordination‐driven assembly of the acs framework occurred concurrently and synergistically with the COF‐1‐type condensation of pyridine‐4‐boronic acid into a C3‐symmetric trimeric boroxine molecule. The resulting boroxine‐based pacs materials exhibited dramatically enhanced gas‐sorption properties as compared to nonpartitioned acs‐type materials and are among the most efficient NH3‐sorption materials. [ABSTRACT FROM AUTHOR]

The effect of porous carbon preform and the infiltration process on the properties of reaction-formed SiC have been investigated in this paper. Five different porous carbon preforms with porosity in a range 35–67% and pore size from 0.03 to 2.58 μm have been infiltrated with liquid or vapor Si. The porous carbon preform and infiltration process affect the reaction rate and infiltration rate, which are key issues in designing the final reaction-formed silicon carbide microstructure. Under suitable experimental conditions, vapor infiltration can lead to deeper infiltration of Si than liquid infiltration. The best result has been obtained by vapor Si infiltration with a relatively smaller scale porous carbon preform having a density of 0.92 g cm-3. The reaction-formed silicon carbide with a flexural strength 630 MPa and density 3.12 g cm-3 and Si-content 8 vol.%, which is superior to commercially obtained reaction-bonded silicon carbides, have been fabricated by Si vapor infiltration. [Copyright &y& Elsevier]

Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co2V‐pacs MOFs exhibit near or at record high uptake capacities for C2H2, C2H4, C2H6, and CO2 among MOFs. The storage capacity of C2H2 is 234 cm3 g−1 (298 K) and 330 cm3 g−1 (273 K) at 1 atm for CPM‐733‐dps (the Co2V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C2H2 adsorption capacity following multiple adsorption–desorption cycles. [ABSTRACT FROM AUTHOR]

Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co2V‐pacs MOFs exhibit near or at record high uptake capacities for C2H2, C2H4, C2H6, and CO2 among MOFs. The storage capacity of C2H2 is 234 cm3 g−1 (298 K) and 330 cm3 g−1 (273 K) at 1 atm for CPM‐733‐dps (the Co2V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C2H2 adsorption capacity following multiple adsorption–desorption cycles. [ABSTRACT FROM AUTHOR]