Search

International audience; A one-pot synthesis method for various α-vinyl,ω-methoxysilyl polyethylene oligomers with well-defined lengths and high end-group functionalities and crystallinities is presented. This method relies on the combination of catalyzed chain growth of ethylene in the presence of a di(alkenyl)magnesium chain transfer agent and a neodymocene complex, followed by efficient deactivation using a variety of silane reagents: trimethoxymethylsilane, trimethoxyvinylsilane and tetramethoxysilane. Further condensation of the ω-methoxysilyl groups of these polymers in active medium (toluene/acetic acid mixture) leads to complex architectures such as comb-like structures or star-like structures that combine high vinyl functionality at extremities with a high crystallinity.

International audience; A SiO 2 /MgCl 2-bisupported Ziegler−Natta-type catalyst is studied in gas-phase ethylene/1-butene copolymerization. With a minimal amount of alkylaluminum required to activate the catalyst, polymerization kinetics is profoundly affected by the dosage of it. High dosage of alkylaluminum retards the polymerization but does not kill the catalyst. Through a comprehensive characterization on the samples by differential scanning calorimetry, crystallization elution fractionation, thermal gradient interaction chromatography, cross-fractiona-tion chromatography, and nuclear magnetic resonance, it has been shown that alkylaluminum also alters the short-chain branching distribution (SCBD) of the copolymer but barely affects the total comonomer incorporation. It is proposed that alkylaluminum alters the active species from producing statistical copolymer chains to producing block polymer chains with C4-enriched and C4-scattered segments. It provides an example of a bimetallic structure of active species as well as an approach to tailor SCBD between a statistical copolymer and block copolymer bearing C4-enriched and C4-scattered segments.

International audience; The reactivity of a phenoxy-imine-ether system (FI)TiCl3/MAO was studied toward selective ethylene trimerization. This system was shown to either trimerize or polymerize ethylene depending on the reaction temperature. Its selectivity switches from a significant production of the trimerization product, 1-hexene (85 wt %, 520-450 kg1-hexene gTi-1 h-1) between 30 and 40 °C, to a moderate polyethylene formation (70-80 wt %, 60-70 kgpolyethylene gTi-1 h-1) at higher reaction temperature (T > 60 °C). Polymerization was investigated based on an original "polymer-to-catalyst" strategy aiming at identifying the active species responsible for this side reaction. Using DSC, SEC and high temperature 13 C NMR analyses, polyethylenes were found to exhibit high molar masses (> 10 5 g mol-1) and a low 1-hexene content (< 1 mol %) at any temperature. Kinetic studies support that trimerization and polymerization species are generated from the catalyst precursor at 40 °C but a parallel process may occur at higher temperature. The increase dispersity to 4.6 at 80 °C suggests a change from single to multisite catalysis. The poor comonomer incorporation ability of the active species is reminiscent of a molecular Ziegler Natta or a bulky postmetallocene catalyst.

International audience; A range of dialkenylmagnesium compounds ([CH2═CH(CH2)n]2Mg; n = 1–6) were synthesized and used as chain transfer agents (CTA) with either (C5Me5)2NdCl2Li(OEt2)2 (1) or [Me2Si(C13H8)2Nd(BH4)2Li(thf)]2 (2) neodymium precursors for the polymerization of ethylene. In all cases, the systems followed a controlled coordinative chain transfer polymerization mechanism. The intramolecular insertion of the vinyl group on the CTA in growing chains is possible and led to the formation of cyclopentyl, cyclohexyl, and possibly cycloheptyl chain ends. While the production of cyclopentyl- or cyclohexyl-capped polyethylene chains can be quantitative (n = 2–5), the integrity of this double bond can also be kept if n is higher than 6. In comparison to 1/CTA catalytic systems, 2/CTA catalytic systems showed a higher propensity to produce cycloalkyl chain ends. This was ascribed to the lower steric demand around the active site, as shown by DFT calculations. In addition, the formation of bis(cyclopentylmethyl)magnesium from dipentenylmagnesium using a catalytic amount of 2 was shown.

International audience; Mid and near infrared (MIR and NIR) spectroscopy associated with the partial least squares (PLS) method makes it possible to rapidly characterize the composition of linear low-density polyethylene (LLDPE) in a large range of 1-hexene content from 0 to 21 mol%. LLDPEs are produced using zirconocene catalysts activated with methylaluminoxane. PLS regression methods for MIR and NIR are constructed from this series of LLDPEs to quantify the 1-hexene content in unknown copolymers. In this case, the PLS regression method aims to correlate the 1-hexene content in the copolymers with their IR spectra. Multivariate calibration models are constructed by the PLS algorithm on pretreated data of MIR and NIR analyses. They are tested and validated by comparing results obtained by NMR and the PLS analyses for four unknown ethylene-1-hexene copolymers.

International audience; Copolymers of ethylene and butadiene were prepared using the ansa-bisfluorenyl Me2Si(C13H8)2NdR complex in combination with dialkylmagnesium as a chain transfer agent. Thorough kinetic studies and computational mechanistic investigations of this copolymerization reaction were performed. Combined with detailed analyses of the polymer microstructure and chain-ends, these studies demonstrate that the entitled copolymerization operates according to a living coordinative chain transfer copol-ymerization of ethylene and butadiene. Besides, in addition to the formation of the previously described 1,2-cyclohexane inner chain cyclic motif, the presence of bicyclic 1,5-decalin units via the formation of transient vinylcyclohexyl-methyl chain-end is discussed in the present communication. The non-accumulation of the vinylcyclohexane motif within the chains is explained by the reversibility of its formation, as interpreted with the help of DFT calculations, or by its rapid conversion into decalin motif after one ethylene insertion. Finally, this study also illustrates the ability of the fluorenyl ligand to adjust its binding mode on demand in order to avoid inhibition of catalyst.

International audience; An innovative method based on thermogravimetric analysis combined with gas chromatography and mass spectrometry, TGA-IST16-GC-MS, was developed for measuring the comonomer type and the comonomer content in a series of linear low-density polyethylene (LLDPE). LLDPE such as copolymers of ethylene and octene or ethylene and hexene were synthetized using the Et(Ind)2ZrCl2 / MAO zirconium-metallocene catalyst. Their characterization with TGA-IST16-GC-MS system were compared to the one of polyethylene prepared under similar conditions and used as reference. TGA-IST16-GC-MS allowed discriminating the comonomer type (hexene or octene) and content. Combining the versatility of thermal analysis and the accuracy and sensitivity of mass spectrometry, this original method proved to be very useful for routine characterization of LLDPE. It has the advantage of being quicker and more easily performed that traditional means of obtaining copolymer compositions such as nuclear magnetic resonance (NMR), or chromatographic methods such as TREF.

International audience

International audience; Coordinative chain transfer copolymerization of ethylene and styrene was successfully achieved using an ansa-bisfluorenyl neodymium complex, a dialkylmagnesium as a chain transfer agent and di-n-butylether (Bu2O) as a co-solvent. Under these conditions, a controlled chain growth was observed during the polymerization. Chain-end functionalization was performed and it revealed that both styryl and alkyl terminated chains shuttle between neodymium and magnesium. The analysis of the microstructure revealed that up to 3 mol% of styrene can be incorporated into the polymer. A computational mechanistic study at the DFT level was performed to characterize insertion selectivities and it further revealed the role of magnesium species in assisting β-H elimination.

International audience

Di(1-(propyl)-2,2,5,5-tetramethyl-1-aza-2,5-disilacylopentane)magnesium was synthesized and used as chain transfer agent for the ethylene polymerization in the presence of a neodymocene precursor. The polymerization was shown to be governed by a catalyzed chain growth process (CCG) on magnesium, allowing the quantitative formation of ammonium or amine functionalized polyethylene (PE) chains. The structure of these chains was shown by 1H and 13C NMR analyses. MALDI-ToF mass spectrometry was successfully used to confirm the structure predicted by the CCG mechanism. The additional formation of telechelic PE chains carrying an ammonium and either a diethyldithiocarbamate or an iodo moiety as end groups was shown after a simple deactivation of the polymerization medium with disulfiram or molecular iodine, respectively.

The size of a silica supported metallocene/MAO (methylaluminoxane) catalyst plays an important role in determining its productivity during ethylene polymerization. From a chemical engineering point of view, this size dependency of catalytic activity of supported metallocenes is mathematically connected with the different levels of mass-transfer resistance in big and small catalyst particles but no experimental evidence has been provided to date. The results of this systematic experimental study clearly demonstrate that the intraparticle monomer diffusion resistance is high in bigger catalyst particles during initial instants of ethylene polymerization and diminishes with the polymer particle growth. Two different silica supported metallocene/MAO catalysts provided the same results while highlighting the fact that catalyst chemistry should be carefully considered while studying complex chemical engineering problems. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4476–4490, 2017

This work highlights a medium pressure and temperature radical polymerization process in organic solvents for the synthesis of ethylene–vinyl acetate copolymers (EVA). Organic solvents play a crucial role in copolymerization yields, copolymer molar masses, chemical composition, and branching degree. THF and dimethylcarbonate (DMC) were selected, yielding EVA copolymers exhibiting molar masses from 1000 up to 35000 g mol–1 and vinyl acetate contents between 4 and 32 mol %. In the case of DMC, an additional transfer agent (propanal) was required to reach the molar-mass range targeted for the specific application of EVA copolymers as cold flow improver (CFI): an essential diesel fuel additive.

Fluorinated activating supports (AS) for metallocene complexes were prepared via treatment of silica with AlEt3 or AlEt2F followed by pyrolysis and combustion steps, and a subsequent fluorination step when AlEt3 was used. This new family of activators appears to be universal for metallocene complexes leading to catalysts displaying high activities in ethylene polymerization without the addition of MAO. A productivity of 3200 g gAS–1 was obtained in 1 h with the catalyst rac-Et(Ind)2ZrCl2/AS8/Al(iBu)3 at 80 °C under 10 bar of ethylene. An isotactic polypropylene with a melting transition at 145 °C was prepared using rac-Me2Si(2-Me-benz(e)Ind)2ZrCl2 activated by AS9 and Al(iBu)3. The spherical particle morphology of polyolefins was particularly adapted to slurry processes employed in industry.

Summary A range of crystalline copolymers of ethylene with α-olefins (propene, hexene, octene and octadecene) were prepared using the complexes Et(Ind)2ZrCl2 and (nBuCp)2ZrCl2 activated with MAO. The average composition of the copolymers was measured using 1H- and 13C-NMR. Then the samples were characterized by High Temperature SEC and DSC. These investigations showed that polymers are homogeneous in composition and consequently were suitable to be used as standards for TREF. This work provided calibrations curves for TREF that can be used on a wide range of α-olefin contents. Finally, these calibrations curves were used to characterize heterogeneous copolymers of ethylene/hexene synthesized using a conventional Ziegler-Natta catalyst.

International audience

Homoleptic benzyl derivatives of titanium and zirconium have been grafted onto silica that was dehydroxylated at 200 and 700 °C, thereby affording bi-grafted and mono-grafted single-site species, respectively, as shown by a combination of experimental techniques (IR, MAS NMR, EXAFS, and elemental analysis) and theoretical calculations. Marked differences between these compounds and their neopentyl analogues are discussed and rationalized by using DFT. These differences were assigned to the selectivity of the grafting process, which, depending on the structure of the molecular precursors, led to different outcomes in terms of the mono- versus bi-grafted species for the same surface concentration of silanol species. The benzylzirconium derivatives were active towards ethylene polymerization in the absence of an activator and the bi-grafted species displayed higher activity than their mono-grafted analogues. In contrast, the benzyltitanium and neopentylzirconium counterparts were not active under similar reaction conditions.

Copolyamides of PA 66/6 lithium 5-sulfoisophthalic acid (LiSIPA) containing up to 40 mol % of LiSIPA were prepared in a 1L-pilot reactor operating at high pressures and high temperatures. Interestingly, the presence of lithium sulfonate moieties highly impacted the glass transition temperature of the polyamide. The Tg increased from 59 °C for PA 66 to 155 °C for a copolymer containing about 40 mol % of LiSIPA. 1,3-Dihexylbenzenedicarboxamide and lithium p-toluenesulfonate were synthesized as model compounds to investigate the interaction of lithium sulfonate moieties and amide functions. Infrared spectroscopy using ATR technology performed on mixture of both compounds showed that the carbonyl group of amide functions interacts with the lithium cation of lithium sulfonate moieties. Similar SO and CO adsorption bands were observed in copolyamides PA 66/6LiSIPA and in mixture of model compounds, which strongly suggest the formation in the copolyamides of physical cross-linking points centered on lithium cations coordinated by carbonyl groups of amide functions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

In the current contribution it is demonstrated - for the first time - that poly(ethylene) (M(n) = 1,400 as well as 2,800 g · mol(-1) , PDI = 1.2) can be readily equipped with highly reactive cyclopentadienyl (Cp) end groups. The Cp terminal poly(ethylene) can subsequently be reacted in an efficient hetero Diels-Alder (HDA) reaction with macromolecules (poly(isobornyl acrylate) (M(n) = 4,600 g · mol(-1) , PDI = 1.10) and poly(styrene) (M(n) = 6,300 g · mol(-1) , PDI = 1.13) featuring strongly electron withdrawing thiocarbonyl thio end groups, prepared via reversible addition fragmentation chain transfer (RAFT) polymerization employing benzylpyridin-2-yldithioformate (BPDF) as transfer agent. The resulting block copolymers have been analyzed via high-temperature size exclusion chromatography (SEC) as well as nuclear magnetic resonance (NMR) spectroscopy. The current system allows for the removal of the excess of the non-poly(ethylene) containing segment via filtration of the poly(ethylene)-containing block copolymer. However, the reaction temperatures need to be judiciously selected. Characterization of the generated block copolymers at elevated temperatures can lead - depending on the block copolymer type - to the occurrence of retro Diels-Alder processes. The present study thus demonstrates that RAFT-HDA ligation can be effectively employed for the generation of block copolymers containing poly(ethylene) segments.

Polyethylene (PE), alkoxyamine- and thiol-terminated PEs (PE-TEMPO and PE-SH, respectively) can be converted to macroradicals using a peroxide, a thermal cleavage of the alkoxyamine and a hydrogen transfer reaction of the thiol, respectively. The addition of these macroradicals to multiwalled carbon nanotubes (MWCNTs) were compared by performing grafting reactions at 160 degrees C in 1,3-dichlorobenzene as solvent. Raman spectroscopy was utilized to follow the introduction of PE on the MWCNTs' surface while thermogravimetric and elemental analysis indicated the extent of this grafting. The grafting ratio was found to be in the range of 19-36 wt %. PE-functionalized MWCNTs were imaged by transmission elec-tronic microscopy showing a PE layer with various thicknesses covering the surface of nanotubes. It was found that higher levels of grafting were obtained using PE-2,2,6,6-tetramethyl-piperidinyl-1-oxy and PE-SH rather than a radical grafting reaction in which dicumyl peroxide, PE, and MWCNTs were reacted. (C) 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 49: 957-965, 2011

Poly(styrene) macromercaptanes (Mn = 1900, 3600, and 6100 g mol-1, PDI ≈ 1.2) derived from thiocarbonyl thio capped polymers prepared via reversible addition fragmentation chain transfer polymerization were employed to initiate the ring opening polymerization (ROP) of D,L-lactide under conditions of organo-catalyis employing 4,4-dimethylaminopyridine. Poly(styrene)-block-poly(lactide) polymers of number average molecular weights up to 25,000 g mol-1 (PDI ≈ 1.2 to 1.6) were obtained and characterized via multiple detection size exclusion chromatography (SEC) using refractive index as well as UV detection. In addition, diffusion ordered nuclear magnetic resonance and liquid chromatography at critical conditions (of both polystyrene as well as poly(lactide) were employed to assess the copolymers' structure. Furthermore, it was demonstrated that polyethylenes capped with a thiol moiety can also be readily chain extended in a ROP employing D,L-lactide, evidenced via NMR and high temperature SEC. This study indicates that the direct use of macromercaptantes is indeed a methodology to switch from a radical to a ROP process. © 2010 Wiley Periodicals, Inc.

A new synthetic strategy, the combination of living polymerization of ylides and ring-opening polymerization (ROP), was successfully used to obtain well-defined polymethylene-b-poly(epsilon-caprolactone) (PM-b-PCL) diblock copolymers. Two hydroxyl-terminated polymethylenes (PM-OH, M-n = 1800 g mol(-1) (PDI = 1.18) and M-n = 6400 g mol(-1) (PDI = 1.14)) were prepared using living polymerization of dimethylsulfoxonium methylides. Then, such polymers were successfully transformed to PM-b-PCL diblock copolymers by using stannous octoate as a catalyst for ROP of c-caprolactone. The GPC traces and H-1 NMR of PM-b-PCL diblock copolymers indicated the successful extension of PCL segment (M-n of PM-b-PCL = 5200-10,300 g mol(-1); PDI = 1.06-1.13). The thermal properties of the double crystalline diblock copolymers were investigated by differential scanning calorimetry (DSC). The results indicated that the incorporation of crystalline segments of PCL chain effectively influence the crystalline process of PM segments. The low-density polyethylene (LDPE)/PCL and LDPE/polycarbonate (PC) blends were prepared using PM-b-PCL as compatibilizer, respectively. The scanning electron microscopy (SEM) observation on the cryofractured surface of such blend polymers indicates that the PM-b-PCL diblock copolymers are effective compatibilizers for LDPE/PCL and LDPE/PC blends. Porous films were fabricated via the breath-figure method using different concentration of PM-b-PCL diblock copolymers in CH2Cl2 under a static humid condition. (C) 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 49: 511-517, 2011

A factorial design was used to understand how reaction parameters such as the monomer concentration, temperature, alkyl aluminium concentration, etc. influence the reaction rate and the polymer properties on two types of metallocene catalyst systems. The polymerisation kinetics and molecular weight distribution (MWD) obtained using a novel system (catalyst supported on an activated silica) were to those obtained with the reference system (same catalyst and silica but activated with MAO). As expected, the reaction temperature and the monomer concentration are the most important factors influencing the polymerisation rate, and this is independent of the catalytic system. Otherwise, the statistical approach allowed us to identify useful levels of MAO and comonomer at which to run in order to maximise the reaction rate.

The role of certain morphological properties of different silica used as supports for metallocene catalysts was investigated in order to quantify their eventual influence on the kinetics of ethylene polymerisation in heptane slurry, as well as on the polymer properties. It was shown that there is no clear link between porosity and observed activity with some highly porous silica producing relatively inactive supported catalysts. It was further shown that within a batch of silica, the particle size had a significant impact on observed kinetics. While it appears that there is possibly some diffusion resistance encountered in the larger particles, it was also shown that prolonged contact between the support and the alkylating agent could increase reaction rates in the larger particles.

Metallocene borohydride complexes {(Me2Si(C13H8)2)Nd(μ-BH4)[(μ-BH4)Li(THF)]}2 (1) and (Me2Si(2,7-tBu2C13H6)2)Nd(BH4)(μ-BH4)Li(ether)3 (2) were prepared by reaction of the dilithium salts of silylene-bridged bis(fluorenyl) ligands with the borohydride precursor Nd(BH4)3(THF)3. The solid state structures of dimeric 1 and monomeric 2 ate complexes were established by X-ray diffraction studies. We showed that these complexes used in combination with (nBu)(nOct)Mg are highly efficient for cyclocopolymerization of ethylene with butadiene leading to a new class of elastomers. Catalyst 1/(nBu)(nOct)Mg provided elastomers with a polyethylene skeleton incorporating unsaturated groups (trans double bond and pendant vinyl units) and 1,2-cyclohexane rings. These rings are formed via an intramolecular cyclization which occurs with a high trans selectivity. The investigation of catalyst 2/(nBu)(nOct)Mg has revealed that the tertio-butyl substitution in positions 2 and 7 of fluorenyl ligands influenced the microstructure...

International audience; Ethylene/butadiene copolymerization can be performed by neodymocene catalysts in the presence of an alkylating/chain transfer agent. A variety of polymerization activities and copolymer microstructures can be obtained depending on the neodymocene ligands. For a set of four catalysts, namely (C5Me5)2NdR, [Me2Si(3-Me3SiC5H3)2]NdR, [Me2Si(C5H4)(C13H8)]NdR and [Me2Si(C13H8)2]NdR, we report a DFT mechanistic study of this copolymerization reaction performed in the presence of dialkylmagnesium. Based on the modeling strategy developed for the ethylene homopolymerization catalyzed by (C5Me5)2NdR in the presence of MgR2, our model is able to account for the following: (i) the formation of Nd/Mg heterobimetallic complexes as intermediates, (ii) the overall differential activity of the catalysts, (iii) the copolymerization reactivity indexes, and (iv) the specific microstructure of the resulting copolymers, including branching and cyclization. The analysis of the reaction mechanisms and the energy profiles thus relates ligand structure, catalyst activity, and polymer microstructure and sets the basis for further catalyst developments.

A new class of well-defined activating supports for olefin polymerization was obtained via the surface organometallic chemistry approach. High activities in slurry polymerization of ethylene along with industrial-grade physical properties of the resulting polyethylene were obtained when these activators were combined with metallocene complexes in the presence of triisobutylaluminium.

Polyolefins account for more than half of worldwide production of thermoplastics. The majority is used as commodity polymers but they may also provide the starting backbones for original architectures. Most polyolefins are obtained by catalytic polymerization and this powerful technique may be used to produce polyolefins incorporating interesting functional groups that can serve as initiating sites for other successively applied polymerization techniques. This review describes the state of the art in strategies employing catalytic olefin polymerization followed by a living or controlled polymerization. The latter methodologies are classified according to the living/controlled polymerization technique used including anionic polymerization, nitroxide-mediated radical polymerization (NMRP), atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain transfer (RAFT).

International audience; Ethylene polymerizations were performed in toluene using the neodymocene complex (C5Me5)2NdCl2Li(OEt2)2 or {(Me2Si(C13H8)2)Nd(μ-BH4)[(μ-BH4)Li(THF)]}2 in combination with n-butyl-n-octylmagnesium used as both alkylating and chain transfer agent. The kinetics were followed for various [Mg]/[Nd] ratios, at different polymerization temperatures, with or without ether as a cosolvent. These systems allowed us to (i) efficiently obtain narrowly distributed and targeted molar masses, (ii) characterize three phases during the course of polymerization, (iii) estimate the propagation activation energy (17 kcal mol–1), (iv) identify the parameters that control chain transfer, and (v) demonstrate enhanced polymerization rates and molar mass distribution control in the presence of ether as cosolvent. This experimental set of data is supported by a computational investigation at the DFT level that rationalizes the chain transfer mechanism and the specific microsolvation effects in the presence of cosolvents at the molecular scale. This joint experimental/computational investigation offers the basis for further catalyst developments in the field of coordinative chain transfer polymerization (CCTP).

A Lewis acid surfactant combined catalyst (LASC) was tentatively used in a cationic polymerization in miniemulsion of p-methoxystyrene (pMOS). In a first part, the initiating potential of trisdodecyl sulfate ytterbium (Yb(DS)3, 0.25H2O) was evidenced in the solution polymerization of pMOS initiated by the corresponding chlorinated adduct pMOS−HCl. Miniemulsion polymerizations of pMOS performed using the same initiating system gave rise to oligomers, but experimental conditions chosen could not evidence the expected LASC-mediated cationic polymerization process. Further studies showed that LASC is located at the interface and acts only as a surfactant together with SDS. The polymerization occurred due to the hydrolysis of pMOS−HCl. The resulting acidification of the water phase leads to the transformation of SDS into its sulfuric acid form acting as an inisurf according to an interfacial cationic polymerization process. Latex particles of pMOS incorporating narrowly distributed low molar mass chains were o...

We present the design and synthesis of a linear ABC triblock terpolymer for the bottom-up synthesis of anisotropic organic/inorganic hybrid materials: polyethylene-block-poly(2-(4-(tert-butoxycarbonyl)amino)butyl-2-oxazoline)-block-poly(2-iso-propyl-2-oxazoline) (PE-b-PBocAmOx-b-PiPrOx). The synthesis was realized via the covalent linkage of azide-functionalized polyethylene and alkyne functionalized poly(2-alkyl-2-oxazoline) (POx)-based diblock copolymers exploiting copper-catalyzed azide-alkyne cycloaddition (CuAAC) chemistry. After purification of the resulting triblock terpolymer, the middle block was deprotected, resulting in a primary amine in the side chain. In the next step, solution self-assembly into core-shell-corona micelles in aqueous solution was investigated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Subsequent directional crystallization of the corona-forming block, poly(2-iso-propyl-2-oxazoline), led to the formation of anisotropic superstructures as demonstrated by electron microscopy (SEM and TEM). We present hypotheses concerning the aggregation mechanism as well as first promising results regarding the selective loading of individual domains within such anisotropic nanostructures with metal nanoparticles (Au, Fe3O4).

Well-defined, crystalline, low molar mass polyethylene PEx (where x is the molar mass 1300 and 2200 g mol–1) bearing thymine (Thy) or 2,6-diaminotriazine (DAT) end groups have been synthesized from amino-terminated PE. Either double-layer or monolayer solid-state morphologies were attained depending on the nature of the end-group(s). PE1300-NH2, PE1300-DAT, and the equimolar blend PE1300-Thy/DAT-PE1300 all organized into double-layer structures composed of extended PE chains sandwiched between H-bonding chain-ends. The double-layered morphology arose from the microphase separation of the polar end-groups and the nonpolar PE chains and was frozen by the crystallization of the PE domains. The regularity of the PE lamellar stacking was higher for the stronger and more directional associated pair Thy/DAT compared with samples of either PE-NH2 or PE-DAT. For PE1300-Thy, the mesoscopic organization was driven by the crystallization of Thy domains prior to crystallization of the PE chains, forcing the small prop...

In slurry and gas phase catalytic ethylene polymerization processes, aluminum alkyl (AlR3) compounds are usually present inside the reactor and their role either as co-catalyst or scavenger is of considerable importance. Silica supported metallocene/methyl aluminoxane (MAO) catalysts show specific interactions with AlR3 compounds. Therefore, this study shows an attempt to analyze and compare the effect of concentration as well as type of commonly used AlR3 on slurry phase ethylene homopolymerization kinetics of silica supported (n-BuCp)2ZrCl2/MAO catalyst. The obtained results indicate that the lower the concentration of smaller AlR3 compounds, the higher the instantaneous catalytic activity. Concerning the polymer particle size distributions, a rise in fines generation has been observed with increasing AlR3 content inside the reactor. Finally, it has been shown that the addition of 2,6-di-tert-butyl-4-methylphenol (a substituted phenol) into the reactor containing AlR3 reduces the influence of AlR3 compounds on the reaction kinetics of silica supported metallocene/MAO catalysts. Polyethylene properties remain similar in all the studied scenarios. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45670.

International audience

The synthesis of lanthanide(III) alkoxides has been described as a series of reactions for which the control of product purity is difficult. The possibility of using amide complexes, in the presence of alcohol, to produce alkoxides was investigated in homogeneous and heterogeneous media. The polymerization of e-caprolactone with alkoxides formed in situ was performed with and without excess alcohol. The latter system was efficient since the polymers were obtained in a short time period, with a well-controlled molecular weight and low polydispersity. The alcohol functionalized all the polymer chains.

Nitrogen-based organolanthanide complexes: (Siam)3Ln (Ln=Yb, 1a, Sm, 1b), (C5H4CMe2)2Sm(Siam), 2, (COT)SmN(SiMe3)2, 4 (Siam=PhC(NSiMe3)2, COT=C8H8), are very efficient towards polymerisation of e-caprolactone. Mechanistic studies on the basis of NMR experiments show that the complexes 1a, 1b and 2 behave as real catalysts, while 4 is the precursor of a heterogeneous initiator. The hapticity of the nitrogen ligand may be related to the formation of cyclic oligomers. © 2000 Academie des sciences / Editions scientifiques et medicales Elsevier SAS organolanthanide / e-caprolactone / polymerisation

International audience; Enhanced spin capturing polymerization (ESCP)-a recent and versatile technique in the field of controlled radical polymerization-achieves control over molecular weights and the synthesis of complex copolymer structures for a wide range of monomers. In the present work, the use of ESCP was extended to the radical polymerization of ethylene under mild conditions (low temperature and medium ethylene pressure) using a nitrone as spin trapping agent. It was demonstrated that the evolution of polyethylene (PE) molecular weight can be accurately described by classical ESCP kinetic equations. A PE bearing a midchain alkoxyamine function was thus obtained with high selectivity (90%). A more complex structure was produced from the radical polymerization of ethylene in the presence of a midchain alkoxyamine-functionalized polystyrene (PS) synthesized by ESCP in the form of ABA triblock copolymer (where A is polystyrene and B polyethylene).

International audience; Thiol end functionalized polyethylenes (PE-SH, Mn around 1000 g mol−1, Đ \textless 1.3) were used as nucleophiles in thia-Michael additions with different acrylic molecules. It was found that under commonly used practical conditions the addition to methacrylates was very difficult, whereas addition to acrylates was very efficient. First, block copolymers based on PE and poly(methyl methacrylate) (PMMA) were targeted by reaction of PE-SH with PMMA obtained by catalytic chain transfer polymerization (CCTP). The reaction however failed and detailed model experiments using butanethiol and a dimer of MMA showed that the solubilization temperature of PE-SH was an impediment to the success of the reaction. The lack of reactivity towards PMMA obtained by CCTP and methacrylate functions was advantageously used to react molecules containing both an acrylate and a methacrylate group in the presence of tributyl phosphine (PBu3) to produce methacrylate-type PE macromonomers. The presence of a hydroxyl function on 3-(acryloyloxy)-2-hydroxypropyl methacrylate induced side trans-esterification reactions catalyzed by PBu3. This was overcome by using the hydroxyl free 2-(acryloyloxy) ethyl methacrylate. With the latter, the desired PE macromonomer exhibited a functionality as high as 85%. Alternatively, 2-isocyanatoethyl methacrylate could also be reacted with PE-SH to produce a highly functionalized methacrylate type PE macromonomer (functionality 89%). Eventually, the efficiency of the thia-Michael addition of PE-SH onto poly(ethylene glycol) acrylate (PEG-acrylate) was used to synthesize the PE-b-PEG block copolymer.

International audience; A poly(glycidyl methacrylate) (PGMA) synthesized by RAFT polymerization was spin-coated onto a silicon substrate to yield, after annealing and rinsing unreacted chains, covalently attached epoxy-containing PGMA pseudo-brushes. A tailor-made ω-amino-poly(ethylene) (Mn = 1040 g mol−1, PDI = 1.3) was then grafted in melt at 130 °C for 24 h by reaction between amine chain-ends and surface-tethered epoxy groups. After discarding unreacted poly(ethylene) chains by sonication and Soxhlet rinsing, the resulting poly(ethylene) brushes were characterized by scanning probe microscopy, water contact angle and neutron reflectivity measurements. The grafting of poly(ethylene) brushes to silicon substrates has thus been demonstrated for the first time and resulted in nanostructured grafted layers with homogeneous surface coverage.

Neutral NiII complexes, classically used for catalytic ethylene polymerization, can play an additional role as radical initiators of the homo- and copolymerizations of (meth)acrylates and styrene. Benefiting from this duality, the copolymerization of ethylene and various (meth)acrylates or styrene was successfully performed. Multiblock copolymers containing sequences of both ethylene and (meth)acrylates were prepared for the first time from an original dual radical/catalytic mechanism.

A route to fully miscible polyethylene (PE) nanocomposites has been established based on polymer-brush-coated nanoparticles. These nanoparticles can be mixed with PE at any ratio, with homogeneous dispersion, and without aggregation. This allowed a first systematic study of the thermomechanical properties of PE nanocomposites without interference from aggregation effects. We observe that the storage modulus in the semicrystalline state and the softening temperature increase significantly with increasing nanoparticle content, whereas the melt viscosity is unaltered by the presence of nanoparticles. We show that the complete miscibility with the semicrystalline polymer matrix and the improvement of thermomechanical properties in the solid state is caused by the PE-coated nanoparticles being nucleating agents for the crystallization of PE. This provides a general route to fully miscibility nanocomposites with semicrystalline polymers.

International audience; Synthesis of highly end-functionalized polyethylene chains was accomplished using both coordination chemistry and radical mediated thiol?ene chemistry. A vinyl end-terminated polyethylene (Mn =1440 g·mol?1, PDI = 1.8) with a functionalization rate of 100% was synthesized using a P,O-chelated catalyst [Ni\Ph2PC(COOEt)═C(C6H5)O\Ph(PPh3)]. Thiol?ene reactions were subsequently undertaken between vinyl-terminated polyethylene and the thiol-containing molecules thioglycolic acid, 2-mercaptoethanol, 1-thioglycerol, chloropropanethiol, and methyl thioglycolate. A range of end-functionalized polyethylenes was thus prepared using simple reaction conditions and exhibiting degrees of functionalization higher than 93%.

International audience; An alpha-[Cu(II)-porphyrin]-polyethylene was synthesized for the first time using copper catalyzed 1,3-dipolar azide-alkyne Huisgen cycloaddition yielding highly colored moiety-substituted polyethylene.

International audience; Nickel complexes [(X,O)NiR(PPh(3))] (X = N or P), designed for the polymerization of ethylene, were found to be efficient for the homo- and copolymerization of butylacrylate (BuA), methylmethacrylate (MMA), and styrene. Their role as a radical initiator was demonstrated from the calculation of the copolymerization reactivity ratios. It was shown that the efficiency of the radical initiation is improved by the addition of PPh3 to the nickel complexes as well as by increasing the temperature. The dual role of a nickel complex as radical initiator and catalyst was exploited to succeed in the copolymerization of ethylene with BuA and MMA. Multiblock copolymers containing sequences of both ethylene and polar monomers were thus prepared for the first time by a dual radical/catalytic mechanism.

International audience; Free radical polymerization of ethylene in an intermediate pressure and temperature range (P(ethylene) < 250 bar and 50 degrees C < T < 90 degrees C) in the presence of an organic solvent has been studied. Under selected conditions ( P, T) and according to the amount of organic solvent added, either a supercritical monophasic or a biphasic medium is obtained. In the case of a biphasic medium, polymerization occurred in the liquid phase in which radical initiator and ethylenes are dissolved. The transition between a monophasic to a biphasic medium has been predicted using thermodynamic calculations and has been related to experimental observations such as the dependence of polymerization activity versus solvent volume.

International audience; Ethylene polymerization is performed industrially either by radical polymerization under severe conditions (1000-4000 bar, 200-300°C) or by catalytic mechanism at lower temperatures (usually less than 100°C) and pressures (below 50 bar). Standard radical polymerization conditions are too severe to permit a fine control of the macromolecular architecture. Under milder conditions radical ethylene polymerization is assumed to be ineffective, which has been confirmed using toluene as solvent. The efficiency of free radical polymerization under mild conditions (up to 250 bar of ethylene and a polymerization temperature between 50°C to 90°C) has been investigated in THF which is a more polar solvent than toluene. In this solvent, polyethylene has been obtained with relatively good yields highlighting an unexpected high solvent effect in the free radical ethylene polymerization. This solvent effect has been rationalized using theoretical considerations