Search

500-nm-thick $\mathrm{In}_{x}\mathrm{Ga}_{1-x}\mathrm{N}$ layers with $x=$ 0.05-0.14 are grown using plasma-assisted molecular beam epitaxy, and their properties are assessed by a comprehensive analysis involving x-ray diffraction, secondary ion mass spectrometry, and cathodoluminescence as well as photoluminescence spectroscopy. We demonstrate low degrees of strain relaxation (10% for $x=0.12$), low threading dislocation densities ($\mathrm{1\times10^{9}\,cm^{-2}}$ for $x=0.12$), uniform composition both in the growth and lateral direction, and a narrow emission band. The unique sum of excellent materials properties make these layers an attractive basis for the top-down fabrication of ternary nanowires.

The dewetting of thin Pt films on different surfaces is investigated as a means to provide the patterning for the top-down fabrication of GaN nanowire ensembles. The transformation from a thin film to an ensemble of nanoislands upon annealing proceeds in good agreement with the void growth model. With increasing annealing duration, the size and shape uniformity of the nanoislands improves. This improvement speeds up for higher annealing temperature. After an optimum annealing duration, the size uniformity deteriorates due to the coalescence of neighboring islands. By changing the Pt film thickness, the nanoisland diameter and density can be quantitatively controlled in a way predicted by a simple thermodynamic model. We demonstrate the uniformity of the nanoisland ensembles for an area larger than 1 cm$^2$. GaN nanowires are fabricated by a sequence of dry and wet etching steps, and these nanowires inherit the diameters and density of the Pt nanoisland ensemble used as a mask. Our study achieves advancements in size uniformity and range of obtainable diameters compared to previous works. This simple, economical, and scalable approach to the top-down fabrication of nanowires is useful for applications requiring large and uniform nanowire ensembles with controllable dimensions.

(In,Ga) alloy droplets are used to catalyse the growth of (In,Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In,Ga)As nanowires for an In/(In+Ga) flux ratio of 0.8. However, with increasing In/(In+Ga) fl ux ratio, the nanowire length and diameter are notably reduced. Using photoluminescence and cathodoluminescence spectroscopy on nanowires covered by a passivating (In,Al)As shell, two luminescence bands are observed. A significant segment of the nanowires shows homogeneous emission, with a wavelength corresponding to the In content in this segment, while the consumption of the catalyst droplet leads to a spectrally-shifted emission band at the top of the nanowires. The (In,Ga)As nanowires studied in this work provide a new approach for the integration of infrared emitters on Si platforms.

Capitalizing on the directed nature of the atomic fluxes in molecular beam epitaxy, we propose and demonstrate the sequential directional deposition of lateral (In,Ga)N shells on GaN nanowires. In this approach, a sub-monolayer thickness of each constituent atomic species, i.e. Ga, In, and N, is deposited subsequently from the same direction by rotating the sample and operating the shutters accordingly. Using multiple iterations of this process, we achieve the growth of homogeneous shells on a single side facet of the nanowires. For higher In content and thus lattice mismatch, we observe a strain-induced bending of the nanowire heterostructures. The incorporation of In and the resulting emission spectra are systematically investigated as a function of both the growth temperature and the In/Ga flux ratio.

Using molecular beam epitaxy, we demonstrate the growth of (In,Ga)N shells emitting in the green spectral range around very thin (35 nm diameter) GaN core nanowires. These GaN nanowires are obtained by self-assembled growth on TiN. We present a qualitative shell growth model accounting for both the three-dimensional nature of the nanostructures as well as the directionality of the atomic fluxes. This model allows us, on the one hand, to optimise the conditions for high and homogeneous In incorporation and, on the other hand, to explain the influence of changes in the growth conditions on the sample morphology and In content. Specifically, the impact of the V/III and In/Ga flux ratios, the rotation speed and the rotation direction are investigated. Notably, with In acting as surfactant, the ternary (In,Ga)N shells are much more homogeneous in thickness along the NW length than their binary GaN counterparts.

An accurate knowledge of the optical constants (refractive index $n$ and extinction coefficient $k$) of ScN is crucial for understanding the optical properties of this binary nitride semiconductor as well as for its use in optoelectronic applications. Using spectroscopic ellipsometry in a spectral range from far infrared to far ultraviolet (0.045-8.5 eV), we determine $n$ and $k$ of ScN layers grown on Al$_{2}$O$_{3}$(0001) substrates by plasma-assisted molecular beam epitaxy. Fits of ellipsometry data return the energies of four oscillators representing critical points in the band structure of ScN, namely, 2.03, 3.89, 5.33, and 6.95 eV. As the infrared range is dominated by free carriers, the vibrational properties of the layers are examined by Raman spectroscopy. Despite the rocksalt structure of ScN, several first-order phonon modes are observed, suggesting a high density of point defects consistent with the high electron density deduced from Hall measurements. Finally, photoluminescence measurements reveal an emission band slightly above the lowest direct bandgap. We attribute the redshift of the peak emission energy from 2.3 to 2.2 eV with increasing layer thickness to a reduction of the O concentration in the layers.

GaAs-based nanowires are among the most promising candidates for realizing a monolithical integration of III-V optoelectronics on the Si platform. To realize their full potential for applications as light absorbers and emitters, it is crucial to understand their interaction with light governing the absorption and extraction efficiency, as well as the carrier recombination dynamics determining the radiative efficiency. Here, we study the spontaneous emission of zincblende GaAs/(Al,Ga)As core/shell nanowire arrays by $\mu$-photoluminescence spectroscopy. These ordered arrays are synthesized on patterned Si(111) substrates using molecular beam epitaxy, and exhibit an exceptionally low degree of polytypism for interwire separations exceeding a critical value. We record emission spectra over more than five orders of excitation density for both steady-state and pulsed excitation to identify the nature of the recombination channels. An abrupt Mott transition from excitonic to electron-hole-plasma recombination is observed, and the corresponding Mott density is derived. Combining these experiments with simulations and additional direct measurements of the external quantum efficiency using a perfect diffuse reflector as reference, we are able to extract the internal quantum efficiency as a function of carrier density and temperature as well as the extraction efficiency of the nanowire array. The results vividly document the high potential of GaAs/(Al,Ga)As core/shell nanowires for efficient light emitters integrated on the Si platform. Furthermore, the methodology established in this work can be applied to nanowires of any other materials system of interest for optoelectronic applications.

An accurate knowledge of the lattice parameters of the new nitride Sc$_\textit{x}$Al$_\textit{1-x}$N is essential for understanding the elastic and piezoelectric properties of this compound as well as for the ability to engineer its strain state in heterostructures. Using high-resolution x-ray diffractometry, we determine the lattice parameters of 100-nm-thick undoped Sc$_\textit{x}$Al$_\textit{1-x}$N layers grown on GaN(0001) templates by plasma-assisted molecular beam epitaxy. The Sc content $\textit{x}$ of the layers is measured independently by both x-ray photoelectron spectroscopy and energy-dispersive x-ray spectroscopy and ranges from 0 to 0.25. The in-plane lattice parameter of the layers linearly increases with increasing $\textit{x}$, while their out-of-plane lattice parameter remains constant. Layers with $\textit{x}$ $\approx$ 0.09 are found to be lattice matched to GaN, resulting in a smooth surface and a structural perfection equivalent to that of the GaN underlayer. In addition, a two-dimensional electron gas is induced at the Sc$_\textit{x}$Al$_\textit{1-x}$N/GaN heterointerface, with the highest sheet electron density and mobility observed for lattice-matched conditions.

We explore and systematically compare the morphological, structural and optical properties of GaN/(Al,Ga)N multiple quantum wells (MQWs) grown by plasma-assisted molecular beam epitaxy (PA-MBE) on freestanding GaN$(0001)$ and GaN$(000\bar{1})$ substrates. Samples of different polarity are found to be comparable in terms of their morphological and structural perfection and exhibit essentially identical quantum well widths and Al content. Regardless of the crystal orientation, the exciton decay in the MQWs at 10 K is dominantly radiative and the photoluminescence (PL) energy follows the quantum confined Stark effect (QCSE) for different quantum well widths. A prominent free-to-bound transition involving interface shallow donors is, however, visible for the N-polar MQWs. At room-temperature, in contrast, the exciton decay in all samples is dominated by nonradiative recombination taking place at point defects, presumably Ca or V N located at the bottom QW interface. Remarkably, the N-polar MQWs exhibit a higher PL intensity and longer decay times than the Ga-polar MQWs at room-temperature. This improved internal quantum efficiency is attributed to the beneficial orientation of the internal electric field that effectively reduces the capture rate of minority carriers by interface trap states.

This report classifies emission inhomogeneities that manifest in InGaN quantum well blue light-emitting diodes grown by plasma-assisted molecular beam epitaxy on free-standing GaN substrates. By a combination of spatially resolved electroluminescence and cathodoluminescence measurements, atomic force microscopy, scanning electron microscopy and hot wet KOH etching, the identified inhomogeneities are found to fall in four categories. Labeled here as type I through IV, they are distinguishable by their size, density, energy, intensity, radiative and electronic characteristics and chemical etch pits which correlates them with dislocations. Type I exhibits a blueshift of about 120 meV for the InGaN quantum well emission attributed to a perturbation of the active region, which is related to indium droplets that form on the surface in the metal-rich InGaN growth condition. Specifically, we attribute the blueshift to a decreased growth rate of and indium incorporation in the InGaN quantum wells underneath the droplet which is postulated to be the result of reduced incorporated N species due to increased N$_{2}$ formation. The location of droplets are correlated with mixed type dislocations for type I defects. Types II through IV are due to screw dislocations, edge dislocations, and dislocation bunching, respectively, and form dark spots due to leakage current and nonradiative recombination., Comment: 11 pages, 8 figures

We investigate the impact of threading dislocations with an edge component (a or a+c-type) on carrier recombination and diffusion in GaN(0001) layers close to the surface as well as in the bulk. To this end, we utilize cathodoluminescence imaging of the top surface of a GaN(0001) layer with a deeply buried (In,Ga)N quantum well. Varying the acceleration voltage of the primary electrons and comparing the signal from the layer and the quantum well enables us to probe carrier recombination at depths ranging from the close vicinity of the surface to the position of the quantum well. Our experiments are accompanied by fully three-dimensional Monte Carlo simulations of carrier drift, diffusion, and recombination in the presence of the surface, the quantum well, and the dislocation, taking into account the dislocation strain field and the resulting piezoelectric field at the dislocation outcrop. Near the surface, this field establishes an exciton dead zone around the dislocation, the extent of which is not related to the carrier diffusion length. However, reliable values of the carrier diffusion length can be extracted from the dipole-like energy shift observed in hyperspectral cathodoluminescence maps recorded around the dislocation outcrop at low acceleration voltages. For high acceleration voltages, allowing us to probe a depth where carrier recombination is unaffected by surface effects, we observe a much stronger contrast than expected from the piezoelectric field alone. This finding provides unambiguous experimental evidence for the strong nonradiative activity of edge threading dislocations in bulk GaN and hence also in buried heterostructures.

We determine the diffusion length of excess carriers in GaN by spatially resolved cathodoluminescence spectroscopy utilizing a single quantum well as carrier collector or carrier sink. Monochromatic intensity profiles across the quantum well are recorded for temperatures between 10 and 300 K. A classical diffusion model accounts for the profiles acquired between 120 and 300 K, while for temperatures lower than 120 K, a quantum capture process has to be taken into account in addition. Combining the diffusion length extracted from these profiles and the effective carrier lifetime measured by time-resolved photoluminescence experiments, we deduce the carrier diffusivity as a function of temperature. The experimental values are found to be close to theoretical ones for the ambipolar diffusivity of free carriers limited only by intrinsic phonon scattering. This agreement is shown to be fortuitous. The high diffusivity at low temperatures instead originates from an increasing participation of excitons in the diffusion process.

The determination of the carrier diffusion length of semiconductors such as GaN and GaAs by cathodoluminescence imaging requires accurate knowledge about the spatial distribution of generated carriers. To obtain the lateral distribution of generated carriers for sample temperatures between 10 and 300 K, we utilize cathodoluminescence intensity profiles measured across single quantum wells embedded in thick GaN and GaAs layers. Thin (Al,Ga)N and (Al,Ga)As barriers, respectively, prevent carriers diffusing in the GaN and GaAs layers to reach the well, which would broaden the profiles. The experimental cathodoluminescence profiles are found to be systematically wider than the energy loss distributions calculated by means of the Monte Carlo program CASINO, with the width monotonically increasing with decreasing temperature. This effect is observed for both GaN and GaAs and becomes more pronounced for higher acceleration voltages. We discuss this phenomenon in terms of both, the electron-phonon interaction controlling the energy relaxation of hot carriers, and the shape of the initial carrier distribution. Finally, we present a phenomenological approach to simulate the carrier generation volume that can be used for the investigation of the temperature dependence of carrier diffusion.

We report on the direct correlation between the structural and optical properties of single, as-grown core-multi-shell GaAs/In$_{0.15}$Ga$_{0.85}$As/GaAs/AlAs/GaAs nanowires. Fabricated by molecular beam epitaxy on a pre-patterned Si(111) substrate, on a row of well separated nucleation sites, it was possible to access individual nanowires in the as-grown geometry. The polytype distribution along the growth axis of the nanowires was revealed by synchrotron-based nanoprobe X-ray diffraction techniques monitoring the axial 111 Bragg reflection. For the same nanowires, the spatially-resolved emission properties were obtained by cathodoluminescence hyperspectral linescans in a scanning electron microscope. Correlating both measurements, we reveal a blueshift of the shell quantum well emission energy combined with an increased emission intensity for segments exhibiting a mixed structure of alternating wurtzite and zincblende stacking compared with the pure crystal polytypes. The presence of this mixed structure was independently confirmed by cross-sectional transmission electron microscopy., Comment: This is an author-created, un-copyedited version of an article published in Nanotechnology. IOP Publishing Ltd. is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1361-6528/ab7590

Understanding the interplay between the structure, composition and opto-electronic properties of semiconductor nano-objects requires combining transmission electron microscopy (TEM) based techniques with electrical and optical measurements on the very same specimen. Recent developments in TEM technologies allow not only the identification and in-situ electrical characterization of a particular object, but also the direct visualization of its modification in-situ by techniques such as Joule heating. Over the past years, we have carried out a number of studies in these fields that are reviewed in this contribution. In particular, we discuss here i) correlated studies where the same unique object is characterized electro-optically and by TEM, ii) in-situ Joule heating studies where a solid-state metal-semiconductor reaction is monitored in the TEM, and iii) in-situ biasing studies to better understand the electrical properties of contacted single nanowires. In addition, we provide detailed fabrication steps for the silicon nitride membranes crucial to these correlated and in-situ measurements., Comment: This is an author-created, un-copyedited version of a topical review published in Nanotechnology. IOP Publishing Ltd. is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1361-6528/ab99f0

The growth of NiO on GaN(00.1) substrates by plasma-assisted molecular beam epitaxy under oxygen rich conditions was investigated at growth temperatures between 100 $^{\circ}$C and 850 $^{\circ}$C. Epitaxial growth of NiO(111) with two rotational domains, with epitaxial relation $\normalsize{}\mathrm{\mathrm{\mathrm{NiO}(1\bar{\mathrm{{1}}}0)}\:||\:\mathrm{\mathrm{GaN}(11.0)}}$ and $\mathrm{\mathrm{\mathrm{NiO}\mathrm{(10\bar{\mathrm{{1}}})}\:||\:\mathrm{GaN(11.0)}}}$, was observed by X-ray diffraction (XRD) and confirmed by in-situ reflection high-energy electron diffraction as well as transmission electron microscopy (TEM) and electron backscatter diffraction. With respect to the high lattice mismatch of 8.1 % and a measured low residual tensile layer strain, growth by lattice matching epitaxy or domain matching epitaxy is discussed. The morphology measured by atomic force microscopy showed a grainy surface, probably arising from the growth by the columnar rotational domains visible in TEM micrographs. The domain sizes measured by AFM and TEM increase with the growth temperature, indicating an increasing surface diffusion length. Growth at 850 $^{\circ}$C, however, involved local decomposition of the GaN substrate that lead to an interfacial $\mathrm{\beta}$-Ga$\mathrm{_{2}}$O$\mathrm{_{3}}$($\bar{\mathrm{{2}}}$01) layer and a high NiO surface roughness. Raman mesurements of the quasi-forbidden one-phonon peak indicate increasing layer quality (decreasing defect density) with increasing growth temperature. The results above suggest optimum growth temperatures around 700 $^{\circ}$C for high layer and interface quality., Comment: 10 pages (+2 Supplement), 12 figures (+2 Supplement). The following article has been submitted to Journal of Applied Physics (October 2019)

Core-shell GaAs-based nanowires monolithically integrated on Si constitute a promising class of nanostructures that could enable light emitters for fast inter- and intrachip optical connections. We introduce and fabricate a novel coaxial GaAs/(In,Ga)As dot-in-a-well nanowire heterostructure to reach spontaneous emission in the Si transparent region, which is crucial for applications in Si photonics. Specifically, we achieve room temperature emission at 1.27 $\mu$m in the telecommunication O band. The presence of quantum dots in the heterostructure is evidenced by a structural analysis based on scanning transmission electron microscopy. The spontaneous emission of these nanowire structures is investigated by cathodoluminescence and photoluminescence spectroscopy. Thermal redistribution of charge carriers to larger quantum dots explains the long wavelength emission achieved at room temperature. Finally, in order to demonstrate the feasibility of the presented nanowire heterostructures as electrically driven light emitters monolithically integrated on Si, a light emitting diode is fabricated exhibiting room-temperature electroluminescence at 1.26 $\mu$m., Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in ACS Applied Nano Materials (2019), copyright (C) American Chemical Society after peer review. To access the final edited and published work see this https://doi.org/10.1021/acsanm.9b01866, the supporting information is available (free of charge) under the same link

We present the combined analysis of the electroluminescence (EL) as well as the current-voltage (I-V) behavior of single, freestanding (In,Ga)N/GaN nanowire (NW) light-emitting diodes (LEDs) in an unprocessed, self-assembled ensemble grown by molecular beam epitaxy. The data were acquired in a scanning electron microscope equipped with a micromanipulator and a luminescence detection system. Single NW spectra consist of emission lines originating from different quantum wells, and the width of the spectra increases with decreasing peak emission energy. The corresponding I-V characteristics are described well by the modified Shockley equation. The key advantage of this measurement approach is the possibility to correlate the EL intensity of a single NW LED with the actual current density in this NW. This way, the external quantum efficiency (EQE) can be investigated as a function of the current in a single NW LED. The comparison of the EQE characteristic of single NWs and the ensemble device allows a quite accurate determination of the actual number of emitting NWs in the working ensemble LED and the respective current densities in its individual NWs. This information is decisive for a meaningful and comprehensive characterization of a NW ensemble device, rendering the measurement approach employed here a very powerful analysis tool.

We demonstrate the top-down fabrication of ordered arrays of GaN nanowires by selective area sublimation of pre-patterned GaN(0001) layers grown by hydride vapor phase epitaxy on Al$_{2}$O$_{3}$. Arrays with nanowire diameters and spacings ranging from 50 to 90 nm and 0.1 to 0.7 $\mu$m, respectively, are simultaneously produced under identical conditions. The sublimation process, carried out under high vacuum conditions, is analyzed \emph{in situ} by reflection high-energy electron diffraction and line-of-sight quadrupole mass spectromety. During the sublimation process, the GaN(0001) surface vanishes, giving way to the formation of semi-polar $\lbrace1\bar{1}03\rbrace$ facets which decompose congruently following an Arrhenius temperature dependence with an activation energy of ($3.54 \pm 0.07$) eV and an exponential prefactor of $1.58\times10^{31}$ atoms cm$^{-2}$ s$^{-1}$. The analysis of the samples by low-temperature cathodoluminescence spectroscopy reveals that, in contrast to dry etching, the sublimation process does not introduce nonradiative recombination centers at the nanowire sidewalls. This technique is suitable for the top-down fabrication of a variety of ordered nanostructures, and could possibly be extended to other material systems with similar crystallographic properties such as ZnO., Comment: This is the accepted manuscript version of an article that appeared in Nanoscale Advances. The CC BY-NC 3.0 license applies, see http://creativecommons.org/licenses/by-nc/3.0/

Nanowire photodetectors are investigated because of their compatibility with flexible electronics, or for the implementation of on-chip optical interconnects. Such devices are characterized by ultrahigh photocurrent gain, but their photoresponse scales sublinearly with the optical power. Here, we present a study of single-nanowire photodetectors displaying a linear response to ultraviolet illumination. Their structure consists of a GaN nanowire incorporating an AlN/GaN/AlN heterostructure, which generates an internal electric field. The activity of the heterostructure is confirmed by the rectifying behavior of the current-voltage characteristics in the dark, as well as by the asymmetry of the photoresponse in magnitude and linearity. Under reverse bias (negative bias on the GaN cap segment), the detectors behave linearly with the impinging optical power when the nanowire diameter is below a certain threshold ($\approx$ 80 nm), which corresponds to the total depletion of the nanowire stem due to the Fermi level pinning at the sidewalls. In the case of nanowires that are only partially depleted, their nonlinearity is explained by a nonlinear variation of the diameter of their central conducting channel under illumination., Comment: This is the accepted manuscript version of an article that appeared in Nanotechnology. The CC BY-NC-ND 3.0 license applies, see https://creativecommons.org/licences/by-nc-nd/3.0

This paper assesses the effects of Ge-doping on the structural and optical (band-to-band and intersubband (ISB)) properties of GaN/AlGaN multi-quantum wells (QWs) designed to display ISB absorption in the short-wave, mid- and far-infrared ranges (SWIR, MIR, and FIR, respectively). The standard c-plane crystallographic orientation is considered for wells absorbing in the SWIR and MIR spectral regions, whereas the FIR structures are grown along the nonpolar m-axis. In all cases, we compare the characteristics of Ge-doped and Si-doped samples with the same design and various doping levels. The use of Ge appears to improve the mosaicity of the highly lattice-mismatched GaN/AlN heterostructures. However, when reducing the lattice mismatch, the mosaicity is rather determined by the substrate and does not show any dependence on the dopant nature or concentration. From the optical point of view, by increasing the dopant density, we observe a blueshift of the photoluminescence in polar samples due to the screening of the internal electric field by free carriers. In the ISB absorption, on the other hand, there is a systematic improvement of the linewidth when using Ge as a dopant for high doping levels, whatever the spectral region under consideration (i.e. different QW size, barrier composition and crystallographic orientation)., Comment: This is the accepted manuscript version of an article that appeared in Semiconductor Science and Technology. The CC BY-NC-ND 3.0 license applies, see https://creativecommons.org/licences/by-nc-nd/3.0

While the properties of wurtzite GaAs have been extensively studied during the past decade, little is known about the influence of the crystal polytype on ternary (In,Ga)As quantum well structures. We address this question with a unique combination of correlated, spatially-resolved measurement techniques on core-shell nanowires that contain extended segments of both the zincblende and wurtzite polytypes. Cathodoluminescence hyperspectral imaging reveals a blueshift of the quantum well emission energy by $75\pm15$ meV in the wurtzite polytype segment. Nanoprobe x-ray diffraction and atom probe tomography enable $\mathbf{k}\cdot\mathbf{p}$ calculations for the specific sample geometry to reveal two comparable contributions to this shift. First, there is a 30% drop in In mole fraction going from the zincblende to the wurtzite segment. Second, the quantum well is under compressive strain, which has a much stronger impact on the hole ground state in the wurtzite than in the zincblende segment. Our results highlight the role of the crystal structure in tuning the emission of (In,Ga)As quantum wells and pave the way to exploit the possibilities of three-dimensional bandgap engineering in core-shell nanowire heterostructures. At the same time, we have demonstrated an advanced characterization toolkit for the investigation of semiconductor nanostructures., Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters (2019), copyright (C) American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.nanolett.9b01241, the supporting information is available (free of charge) under the same link

We present a systematic study of top-down processed GaN/AlN heterostructures for intersubband optoelectronic applications. Samples containing quantum well superlattices that display either near- or mid-infrared intersubband absorption were etched into nano- and micropillar arrays in an inductively coupled plasma. We investigate the influence of this process on the structure and strain-state, on the interband emission and on the intersubband absorption. Notably, for pillar spacings significantly smaller ($\leq1/3$) than the intersubband wavelength, the magnitude of the intersubband absorption is not reduced even when 90\% of the material is etched away and a similar linewidth is obtained. The same holds for the interband emission. In contrast, for pillar spacings on the order of the intersubband absorption wavelength, the intersubband absorption is masked by refraction effects and photonic crystal modes. The presented results are a first step towards micro- and nanostructured group-III nitride devices relying on intersubband transitions.

We present a study of GaN single-nanowire ultraviolet photodetectors with an embedded GaN/AlN superlattice. The heterostructure dimensions and doping profile were designed in such a way that the application of positive or negative bias leads to an enhancement of the collection of photogenerated carriers from the GaN/AlN superlattice or from the GaN base, respectively, as confirmed by electron beam-induced current measurements. The devices display enhanced response in the ultraviolet A ($\approx$ 330-360 nm) / B ($\approx$ 280-330 nm) spectral windows under positive/negative bias. The result is explained by correlation of the photocurrent measurements with scanning transmission electron microscopy observations of the same single nanowire, and semi-classical simulations of the strain and band structure in one and three dimensions., Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters (2017), copyright (C) American Chemical Society after peer review. To access the final edited and published work see http://doi.org/10.1021/acs.nanolett.7b01118

Intersubband optoelectronic devices rely on transitions between quantum-confined electron levels in semiconductor heterostructures, which enables infrared (IR) photodetection in the 1-30 $\mu$m wavelength window with picosecond response times. Incorporating nanowires as active media could enable an independent control over the electrical cross-section of the device and the optical absorption cross-section. Furthermore, the three-dimensional carrier confinement in nanowire heterostructures opens new possibilities to tune the carrier relaxation time. However, the generation of structural defects and the surface sensitivity of GaAs nanowires have so far hindered the fabrication of nanowire intersubband devices. Here, we report the first demonstration of intersubband photodetection in a nanowire, using GaN nanowires containing a GaN/AlN superlattice absorbing at 1.55 $\mu$m. The combination of spectral photocurrent measurements with 8-band k$\cdot$p calculations of the electronic structure supports the interpretation of the result as intersubband photodetection in these extremely short-period superlattices. We observe a linear dependence of the photocurrent with the incident illumination power, which confirms the insensitivity of the intersubband process to surface states and highlights how architectures featuring large surface-to-volume ratios are suitable as intersubband photodetectors. Our analysis of the photocurrent characteristics points out routes for an improvement of the device performance. This first nanowire based intersubband photodetector represents a technological breakthrough that paves the way to a powerful device platform with potential for ultrafast, ultrasensitive photodetectors and highly-efficient quantum cascade emitters with improved thermal stability., Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters (2017), copyright (C) American Chemical Society after peer review. To access the final edited and published work see http://dx.doi.org/10.1021/acs.nanolett.7b03414 , the supporting information is available (free of charge) under the same link