Search

In 2016, we published a method for processing dual-energy computed tomography (DECT) data called system-independent rho-e/Z-e ( $\rho _{\mathrm {e}}/Z_{\mathrm {e}}$ ) or SIRZ. Using data from multiple DECT systems and spectra, SIRZ estimated the electron density $\rho _{\mathrm {e}}$ and effective atomic number $Z_{\mathrm {e}}$ (based on published X-ray cross sections), for a set of known specimens. However, the decomposition process required complex spectral modeling of the DECT system, which made SIRZ difficult to implement and automate. This paper describes the subsequent work on “SIRZ-2” to simplify the spectral modeling, automate the process, and improve its range and versatility. The SIRZ-2 basis functions are more accurate for the X-ray energy range ( $Z_{\mathrm {e}}$ of 6–20) were scanned with multiple spectral pairs (up to 200 keV) on seven different DECT systems, including a commercial airport luggage scanner. For these varied tests, the average SIRZ-2 relative errors for $\rho _{\mathrm {e}}$ estimates were four times lower (0.7% compared to 3.0% for SIRZ), while average $Z_{\mathrm {e}}$ relative errors were comparably low for both methods ( $\rho _{\mathrm {e}}$ , $Z_{\mathrm {e}}$ ) that can be directly compared across DECT systems and over time.

In this paper, based on an invited talk at SORMA (May 2016), we present an overview of x-ray sources, detectors and system configurations for non-intrusive inspection (NII) of cargo containers. Our emphasis is on dual-energy x-ray NII for detecting high-atomic-number ( $\text {Z}\geq 72$ ) materials such as tungsten shielding and special nuclear materials (SNM). Standard single-energy (MeV and above) x-rays needed to penetrate and image cargo provide little SNM contrast, whereas dual-energy x-ray NII is demonstrated as a way to improve the selectivity of materials with Z $\text {Z}\geq 72$ . For two possible dual-energy x-ray source technologies—polyenergetic dual-energy (PDE) and quasi-monoenergetic x-ray sources (QMXS)—we investigate their trade-offs and future prospects using experimental and simulated results. The reduced scatter and larger separation of low- and high-energy photons provided by QMXS offers improved high-Z material contrast, but practical considerations such as flux and pulse rate need to be solved before making a deployable system. Straight-ray simulations show factor of four increases in contrast for QMXS over PDE scans of tin (Z=50) and iron (Z=26) relative to a uranium plate (Z=92) behind 20 cm of iron simulated cargo.

We present a new decomposition approach for dual-energy computed tomography (DECT) called SIRZ that provides precise and accurate material description, independent of the scanner, over diagnostic energy ranges (30 to 200 keV). System independence is achieved by explicitly including a scanner-specific spectral description in the decomposition method, and a new X-ray-relevant feature space. The feature space consists of electron density, ${\rho _{\rm e}}$ , and a new effective atomic number, ${{\rm Z}_{\rm e}}$ , which is based on published X-ray cross sections. Reference materials are used in conjunction with the system spectral response so that additional beam-hardening correction is not necessary. The technique is tested against other methods on DECT data of known specimens scanned by diverse spectra and systems. Uncertainties in accuracy and precision are less than 3% and 2% respectively for the ( ${\rho _{\rm e}}$ , ${{\rm Z}_{\rm e}}$ ) results compared to prior methods that are inaccurate and imprecise (over 9%).

We propose a method for material characterization using Spectral X-ray Computed Tomography (SCT). Our SCT method takes advantage of recently-developed MultiX ME 100 photon counting detectors to simultaneously measure the energy dependence of a material's linear attenuation coefficient (LAC). Relative electron density ( ρ e ) and effective atomic number (Ze) are estimated directly from the energy-dependent LAC measurements. The method employs a spectral correction algorithm and automated selection and weighting of the energy bins for optimized performance. When examining materials with Ze ≤ 23, this method achieves accuracy comparable to traditional dual-energy CT, which is often realized through consecutive data acquisitions, and is compatible with any spectral detector. The method disregards data in photon starved energy channels improving the detection of highly attenuating materials, compared to techniques that use energy integrating detectors.

In a recent journal article [IEEE Trans. Nuc. Sci., 63(1), 341-350, 2016], we introduced a novel method that decomposes dual-energy X-ray CT (DECT) data into electron density (ρe) and a new effective-atomic-number called Ze in pursuit of system-independent characterization of materials. The Ze of a material, unlike the traditional Zeff, is defined relative to the actual X-ray absorption properties of the constituent atoms in the material, which are based on published X-ray cross sections. Our DECT method, called SIRZ (System-Independent ρe, Ze), uses a set of well-known reference materials and an understanding of the system spectral response to produce accurate and precise estimates of the X-ray-relevant basis variables (ρe, Ze) regardless of scanner or spectra in diagnostic energy ranges (30 to 200 keV). Potentially, SIRZ can account for and correct spectral changes in a scanner over time and, because the system spectral response is included in the technique, additional beam-hardening correction is not needed. Results show accuracy (

Laser experiments, such as those planned at the National Ignition Facility (NIF) and the Omega facility, use small targets with the goal of studying high-energy density physics and inertial confinement fusion. One particular application is a target with layers whose density changes in a carefully designed gradient (from 0.2 to 1.2 g/cm 3 ) for use in isentropic compression experiments (ICE). We are nondestructively determining the density of these layers using two X-ray microscopes. Because of the many interfaces that comprise the layers, a plethora of X-ray phase contrast fringes appear in the images, leading to many radiographic and tomographic artifacts which compromise the ability to infer the density of the layer. In this paper, we describe how we are attacking this problem with a variety of radiographic standards and through radiographic simulation using the HADES radiographic simulation code.

A gamma-ray-based, active (A) and passive (P) computed tomography (CT) technology has been developed that locates, identifies and quantifies gamma-ray emitting isotopes, transuranic (TRU) and others, in nuclear waste drums. ACT uses a collimated external source and a HPGe detector to measure selected mono-energetic gamma-rays that are attenuated by waste-drum contents; a separate PCT measurement uses the HPGe detector to record the spectra of gamma-rays emitted from within a drum. The ACT attenuation images and the PCT emission spectra are coupled to quantitatively assay drum contents for ∼0.1–200 g of TRU isotopes. Calibration requires a single measurement of a known radioactive standard; construction of waste-drum surrogates is not required. Fixed and mobile systems demonstrated compliance with a DOE quality assurance program via several independent blind tests.

We are developing a new technique using both active (A) and passive (P) computed tomography (CT) to overcome problems in the quantitative analysis of plutonium contents in the molten salt extract (MSE) plutonium buttons. Our first three dimensional image of the MSE button using ACT scan has already shown heterogeneous behavior throughout the button as opposed to the model of a homogeneous button as previously thought. An image from a PCT scan, although it does not have sufficient spatial resolution and data, also seems to support the heterogeneous picture.

x-Ray computed axial tomography (CT) provides cross-sectional views of materials, components, and assemblies for industrial non-destructive evaluation. We have applied CT imaging to quantitatively measure the 3-D distribution ogf x-ray attenuation at reasonably high resolutions. In our industrial x-ray CT-studies, we have centered on two technical approaches: a first-generation translate/rotate CT system that consist of well-collimated (∼ 0.55 mm) photon source detector, and a third-generation scanner that uses a fluoroscopy detector.

The mix between x-ray phase and attenuation information needs to be understood for accurate object recovery from radiography and tomography data. We are researching and experimentally validating algorithms that simulate x-ray phase contrast to determine the required physics necessary for quantitative object recovery. The results of a study are described to determine if a multislice (beam-propagation) method is required for simulating x-ray radiographs. We conclude that the multislice method is not required for accurate simulation of greater than or equal to 8 keV x-ray radiographs of millimeter-size objects with micrometer structures.

High energy density experiments, such as those planned at the National Ignition Facility (NIF), use mesoscale targets with the goals of studying high energy density physics, inertial confinement fusion, and the support of national security needs. Mesoscale targets are typically several millimeters in size and have complex micrometer‐sized structures composed of high‐density metals and low‐density foams and ices. These targets are designed with exacting tolerances that are difficult to achieve at present. Deviation from these tolerances can result in compromise of experimental goals and thus it is necessary to determine as‐built properties of these targets using NDE techniques. Radiography and computed tomography are being used to investigate these targets, but the mix between phase and absorption information is difficult to separate, making interpretation of results difficult. We have recently improved the HADES radiographic simulation code to include phase in simulations, as an aid for doing NDE on mesos...

We have developed a new tomography code, HADES-CCG. This code uses HADES, a radiographic simulation code, to perform forward- and back-projection and is coupled to a Constrained Conjugate Gradient (CCG) optimizer. An iterative solution to the reconstruction problem is found which is optimal, given the detector noise model, a source model and the appropriate attenuation cross-sections. By explicitly including experimental effects in forward- and back-projection, these effects are not folded back into the object model.