Search

Air pollution and particulate matter (PM) are the leading environmental cause of death worldwide. Exposure limits have lowered to increase the protection of human health; accordingly, it becomes increasingly important to understand the toxicological mechanisms on cellular models at low airborne PM concentrations which are relevant for actual human exposure. The use of air liquid interface (ALI) models, which mimic the interaction between airborne pollutants and lung epithelia, is also gaining importance in inhalation toxicological studies. This study reports the effects of ALI direct exposure of bronchial epithelial cells BEAS-2B to ambient PM 1 (i.e. particles with aerodynamic diameter lower than 1 μm). Gene expression (HMOX, Cxcl-8, ATM, Gadd45-a and NQO1), interleukin (IL)-8 release, and DNA damage (Comet assay) were evaluated after 24 h of exposure. We report the dose-response curves of the selected toxicological outcomes, together with the concentration-response association and we show that the two curves differ for specific responses highlighting that concentration-response association may be not relevant for understanding toxicological outcomes. Noteworthy, we show that pro-oxidant effects may be driven by the deposition of freshly emitted particles, regardless of the airborne PM 1 mass concentration. Furthermore, we show that reference airborne PM 1 metrics, namely airborne mass concentration, may not always reflect the toxicological process triggered by the aerosol. These findings underscore the importance of considering different aerosol metrics to assess the toxicological potency of fine and ultrafine particles. To better protect human health additional metrics should be defined, than account for the properties of the entire aerosol mixture including specific as particle size (i.e. particles with aerodynamic diameter lower than 20 nm), the relevant aerosol sources (e.g., traffic combustion, secondary organic aerosol …) as well as their atmospheric processing (freshly emitted vs aged ones)., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Maurizio Gualtieri reports financial support was provided by Italian Ministry of the University. Maurizio Gualtieri reports financial support was provided by European Union NextGenerationEU, National Recovery and Resilience Plan (NRRP) Mission 4. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Associations between indoor air pollution from fine particulate matter (PM with aerodynamic diameter d p  < 2.5 μm) and human health are poorly understood. Here, we analyse the concentration-response curves for fine and ultrafine PM, the gene expression, and the methylation patterns in human bronchial epithelial cells (BEAS-2B) exposed at the air-liquid interface (ALI) within a classroom in downtown Rome. Our results document the upregulation of aryl hydrocarbon receptor (AhR) and genes associated with xenobiotic metabolism (CYP1A1 and CYP1B1) in response to single exposure of cells to fresh urban aerosols at low fine PM mass concentrations within the classroom. This is evidenced by concentrations of ultrafine particles (UFPs, dp < 0.1 μm), polycyclic aromatic hydrocarbons (PAH), and ratios of black carbon (BC) to organic aerosol (OA). Additionally, an interleukin 18 (IL-18) down-regulation was found during periods of high human occupancy. Despite the observed gene expression dysregulation, no changes were detected in the methylation levels of the promoter regions of these genes, indicating that the altered gene expression is not linked to changes in DNA methylation and suggesting the involvement of another epigenetic mechanism in the gene regulation. Gene expression changes at low exposure doses have been previously reported. Here, we add the possibility that lung epithelial cells, when singly exposed to real environmental concentrations of fine PM that translate into ultra-low doses of treatment, may undergo epigenetic alteration in the expression of genes related to xenobiotic metabolism. Our findings provide a perspective for future indoor air quality regulations. We underscore the potential role of indoor UFPs as carriers of toxic molecules with low-pressure weather conditions, when rainfall and strong winds may favour low levels of fine PM., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 National reserch Council of Italy - CNR. Published by Elsevier Ltd.. All rights reserved.)

Particulate Matter (PM) is a complex and heterogeneous mixture of atmospheric particles recognized as a threat to human health. Oxidative Potential (OP) measurement is a promising and integrative method for estimating PM-induced health impacts since it is recognized as more closely associated with adverse health effects than ordinarily used PM mass concentrations. OP measurements could be introduced in the air quality monitoring, along with the parameters currently evaluated. PM deposition in the lungs induces oxidative stress, inflammation, and DNA damage. The study aimed to compare the OP measurements with toxicological effects on BEAS-2B and THP-1 cells of winter and summer PM 1 collected in the Po Valley (Italy) during 2021. PM 1 was extracted in deionized water by mechanical agitation and tested for OP and, in parallel, used to treat cells. Cytotoxicity, genotoxicity, oxidative stress, and inflammatory responses were assessed by MTT test, DCFH-DA assay, micronucleus, γ-H2AX, comet assay modified with endonucleases, ELISA, and Real-Time PCR. The evaluation of OP was performed by applying three different assays: dithiothreitol (OP DTT ), ascorbic acid (OP AA ), and 2',7'-dichlorofluorescein (OP DCFH ), in addition, the reducing potential was also analysed (RP DPPH ). Seasonal differences were detected in all the parameters investigated. The amount of DNA damage detected with the Comet assay and ROS formation highlights the presence of oxidative damage both in winter and in summer samples, while DNA damage (micronucleus) and genes regulation were mainly detected in winter samples. A positive correlation with OP DCFH (Spearman's analysis, p < 0.05) was detected for IL-8 secretion and γ-H2AX. These results provide a biological support to the implementation in air quality monitoring of OP measurements as a useful proxy to estimate PM-induced cellular toxicological responses. In addition, these results provide new insights for the assessment of the ability of secondary aerosol in the background atmosphere to induce oxidative stress and health effects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Exposures to fine particulate matter (PM[Formula: see text]) have been associated with health impacts, but the understanding of the PM[Formula: see text] concentration-response (PM[Formula: see text]-CR) relationships, especially at low PM[Formula: see text], remains incomplete. Here, we present novel data using a methodology to mimic lung exposure to ambient air (2[Formula: see text] 60 [Formula: see text]g m[Formula: see text]), with minimized sampling artifacts for nanoparticles. A reference model (Air Liquid Interface cultures of human bronchial epithelial cells, BEAS-2B) was used for aerosol exposure. Non-linearities observed in PM[Formula: see text]-CR curves are interpreted as a result of the interplay between the aerosol total oxidative potential (OP[Formula: see text]) and its distribution across particle size (d[Formula: see text]). A d[Formula: see text]-dependent condensation sink (CS) is assessed together with the distribution with d[Formula: see text] of reactive species . Urban ambient aerosol high in OP[Formula: see text], as indicated by the DTT assay, with (possibly copper-containing) nanoparticles, shows higher pro-inflammatory and oxidative responses, this occurring at lower PM[Formula: see text] concentrations (< 5 [Formula: see text]g m[Formula: see text]). Among the implications of this work, there are recommendations for global efforts to go toward the refinement of actual air quality standards with metrics considering the distribution of OP[Formula: see text] with d[Formula: see text] also at relatively low PM[Formula: see text]., (© 2023. The Author(s).)

In the framework of the 2017 "carbonaceous aerosol in Rome and Environs" (CARE) experiment, particle number size distributions have been continuously measured on February 2017 in downtown Rome. These data have been used to estimate, through MPPD model, size and time resolved particle mass, surface area and number doses deposited into the respiratory system. Dosimetry estimates are presented for PM 10 , PM 2.5 , PM 1 and Ultrafine Particles (UFPs), in relation to the aerosol sources peculiar to the Mediterranean basin and to the atmospheric conditions. Particular emphasis is focused on UFPs and their fraction deposited on the olfactory bulb, in view of their possible translocation to the brain. The site of PM 10 deposition within the respiratory system considerably changes, depending on the aerosol sources and then on its different size distributions. On making associations between health endpoints and aerosol mass concentrations, the relevant coarse and fine fractions would be more properly adopted, because they have different sources, different capability of penetrating deep into the respiratory system and different toxicological implications. The separation between them should be set at 1 µm, rather than at 2.5 µm, because the fine fraction is considerably less affected by the contribution of the natural sources. Mass dose is a suitable metric to describe coarse aerosol events but gives a poor representation of combustion aerosol. This fraction of particles, made of UFPs and of accumulation mode particles (mainly with size below 0.2 µm), is of high health relevance. It elicited the highest oxidative activity in the CARE experiment and is properly described by the particle surface area and by the number metrics. Such metrics are even more relevant for the UFP doses deposited on the olfactory bulb, in consideration of the role recognized to oxidative stress in the progression of neurodegenerative diseases. Such metrics would be more appropriate, rather than PM x mass concentrations, to correlate neurodegenerative pathologies with aerosol pollution., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The causal link between ambient PM 2.5 and adverse health effects is still not clear enough, nor it is clear what factors (physical and/or chemical) contribute to PM 2.5 toxicity and by what mechanism(s). With a view on this, we launched the CARE experiment, during which we performed a comprehensive characterisation of the physicochemical properties of fine and ultrafine particles under exposure levels dominated by the urban combustion aerosol, and their toxicological assessment through in-vitro tests (lung epithelia cells cultured at the ALI) directly under ambient conditions, oxidative potential (determined through 2′,7′-dichlorouorescin, OP DCFH ), and human biomonitoring. We already reported about aerosol characterisation, and in-vitro model results during CARE. Building upon these, in this work we assess the combustion aerosol oxidative response through the analysis of consistency between the three independent aerosol oxidative responses obtained, and the exploration of any causality link with the combustion aerosol. This is the first time to our knowledge that combustion related PM 2.5 physicochemical properties and its OP DCFH are compared to the cellular-oxidative response (C-OR) obtained through the PM in-vitro test carried out (for the first time) directly under atmospheric ambient conditions, and to certain biomarkers of oxidative damage to DNA/RNA (8-oxo-7,8-dihydroguanine, 8-oxo-7,8-dihydro-2′-deoxyguanosine and 8-oxo-7,8 - dihydroguanosine). Our results provide a first evidence of a combustion-dependent association between the in vitro C-OR, the PM 2.5 OP DCFH , and the urinary excretion of the 8-Oxo-7,8-dihydroguanosine. Yet this is not a substantial basis for drawing any cause-effect relationship. However, our findings support previous literature suggesting a link between combustion and oxidative response of PM 2.5. Moreover, we add a consistency across completely independent oxidative response measurements with a possible dependence on the combustion traffic-related aerosol. This is a piece of information that may have important implications in the understanding of how combustion sources contribute to oxidative response related diseases. Image 1 [ABSTRACT FROM AUTHOR]

In this work, we characterize the Black Carbon (BC) aerosol in an urban airport vs. urban background environment with the objective to evaluate when and how the ultrafine BC dominates the bulk aerosol. Aerosol optical and microphysical properties were measured in a Mediterranean urban area (Rome) at sites impacted by BC sources including fossil fuels (FF), and biomass burning (BB). Experimental BC data were interpreted through measurement-constrained simulations of BC microphysics and optical properties. A “scheme” to separate the ultrafine BC was experimented on the basis of the relation found between changes in the BC partitioning between Aitken and accumulation mode particles, and relevant changes in particle size distribution and optical properties of the bulk aerosol. This separation scheme, applied to experimental data, proved useful to reveal the impact of airport and road traffic emissions. Findings may have important atmospheric implications. The experimented scheme can help separating different BC sources (FF, BB, “aged” BC) when BC size distributions may be very difficult to obtain (satellite, columnar observations, routine monitoring). Indeed, separating the ultrafine BC from the fine BC may provide significant benefits in addressing BC impact on air quality and climate. [ABSTRACT FROM AUTHOR]

Abstract We address observations of physical and chemical properties of Saharan dust advections (SDA) as observed in the Central Mediterranean basin, within the framework of the LIFE+10, DIAPASON project (www.diapason-life.eu). DIAPASON aimed at the definition of best practices and tools to detect and evaluate the contribution of Saharan dust to ground particulate matter (PM) loads. Polarization-sensitive, automated lidar-ceilometers (PLC) are one of the tools prototyped and used in the Rome area to reach this goal. The results presented in this study focus on: 1) the effectiveness of various observational tools at detecting and characterizing atmospheric dust plumes, and 2) processes and properties of Saharan dust advections reaching the central Mediterranean region. In this respect, the combination of numerical model forecasts and time-resolved (at least hourly) PLC or chemical observations was found to constitute an efficient way to predict and confirm the presence of Saharan dust. In the period 2011–2014, Saharan dust advections were observed to reach over Rome on about 32% of the days. In some 70% of these days the dust reached the ground in dry conditions, while 30% of advection days involved wet deposition. Dry (wet) deposition was found to maximize (minimize) in summer. The northern Sahara between Algeria and Tunisia (Grand Erg Oriental), was confirmed as the most frequent region of origin of the dust mobilized towards central Italy. Secondary source regions include northern Morocco and Libya. On a statistical basis, Saharan advections to Rome were preceded by increasing atmospheric pressure and stability. These conditions were found to favor the accumulation of aerosols related to local emission sources before the SDA reached the ground. Meteorology (precipitation and turbulence in primis) resulted to be an important modulator of PM concentrations during SDAs. Magnitude and timing of these factors should be well considered to correctly evaluate the dust share in PM loads or the related health effects. Saharan advections observed during DIAPASON affected particle concentrations down to diameters of about 0.6–1 μm, with number concentrations peaking at the 2.5 μm diameter range. These advections were associated with a significant increase in Si-rich particles containing a non-negligible fraction of water. Rainfall was observed to preferentially remove dust particles larger than 2 μm, causing a significant depletion in the Ca-rich fraction with respect to the Si-rich one. The increase in PLC depolarization ratios above 5%, as well as the hourly PIXE records of the Si/Ca ratio increasing above 1 were found to represent good markers for the actual presence of Saharan dust particulate matter, when Saharan advection conditions are occurring. Highlights • Saharan dust advections to Europe occur some 33% of the time in central Mediterranean. • Saharan advections are well identified by polarization lidar and numerical model sinergy. • Meteorology is important at modulating dust and pollution properties at receptor sites. • Selective wet-removal processes occur within dust-laden, precipitating clouds. • Polarization lidar-ceilometers provide optimal 24/7 remote-sensing of atmospheric dust. [ABSTRACT FROM AUTHOR]