Search

Biological small‐angle neutron scattering (SANS) instruments facilitate critical analysis of the structure and dynamics of complex biological systems. However, with the growth of experimental demands and the advances in optical systems design, a new neutron optical concept is necessary to overcome the limitations of current instruments. This work presents an approach to include experimental objectives (i.e. the science to be supported by a specific neutron scattering instrument) in the optimization of the neutron optical concept. The approach for a proposed SANS instrument at the Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory, USA, is presented here. The instrument is simulated with the McStas software package. The optimization process is driven by an evolutionary algorithm using McStas output data, which are processed to calculate an objective function designed to quantify the expected performance of the simulated neutron optical configuration for the intended purpose. Each McStas simulation covers the complete instrument, from source to detector, including realistic sample scattering functions. This approach effectively navigates a high‐dimensional parameter space that is otherwise intractable; it allows the design of next‐generation SANS instruments to address specific scientific cases and has the potential to increase instrument performance compared with traditional design approaches. [ABSTRACT FROM AUTHOR]

The Spallation Neutron Source, in operation at the Oak Ridge National Laboratory since 2006, was designed to allow the addition of a second target station and an upgrade of the accelerator proton power. Both upgrades are now underway. This paper describes the evolution of the design of the target of the second target station with the emphasis on the effects of the proton beam footprint on the energy deposition in the target, stresses induced by the pulsed operation, and the importance of the residual heat. The moderator configurations and their optimization are discussed. With the utilization of pure parahydrogen moderators, small neutron beam cross-sections, and the specific optimization, neutron beams of the second target station will achieve exceptionally high peak brightness and time-averaged brightness. [ABSTRACT FROM AUTHOR]

VENUS is an imaging instrument that will use a broad range of neutron wavelengths, from epithermal to cold, will include enhanced contrast mechanisms, and will offer novel energy-selective imaging techniques that directly connect the structures, properties, and function of complex engineering materials and systems to reveal practical and fundamental answers about their real-world performance. The instrument is to be built at SNS beam line 10 and will face the decoupled poisoned hydrogen moderator. The driving cost for the instrument is the beam line and instrument cave shielding. Initial scoping analyses were performed to estimate thickness and composition of shielding materials for the instrument cave and beam line. In light of the upcoming Proton Power Upgrade (PPU) project, these transport analyses were performed for proton beam on target at 1.3 GeV and 2 MW. [ABSTRACT FROM AUTHOR]

The European Spallation Source being constructed in Lund, Sweden will provide the user community with a neutron source of unprecedented brightness. By 2025, a suite of 15 instruments will be served by a high-brightness moderator system placed above the spallation target. The ESS infrastructure, consisting of the proton linac, the target station, and the instrument halls, allows for implementation of a second source below the spallation target. We propose to develop a second neutron source with a high-intensity moderator able to (1) deliver a larger total cold neutron flux, (2) provide high intensities at longer wavelengths in the spectral regions of Cold (4–10 Å), Very Cold (10–40 Å), and Ultra Cold (several 100 Å) neutrons, as opposed to Thermal and Cold neutrons delivered by the top moderator. Offering both unprecedented brilliance, flux, and spectral range in a single facility, this upgrade will make ESS the most versatile neutron source in the world and will further strengthen the leadership of Europe in neutron science. The new source will boost several areas of condensed matter research such as imaging and spin-echo, and will provide outstanding opportunities in fundamental physics investigations of the laws of nature at a precision unattainable anywhere else. At the heart of the proposed system is a volumetric liquid deuterium moderator. Based on proven technology, its performance will be optimized in a detailed engineering study. This moderator will be complemented by secondary sources to provide intense beams of Very- and Ultra-Cold Neutrons. [ABSTRACT FROM AUTHOR]

Monte Carlo radiation transport codes have become the primary tool for shielding and activation analysis at high-powered spallation neutron sources. However, use of these codes to model facilities that have large amounts of shielding requires the use of variance reduction methods. This paper presents examples that apply ADVANTG generated variance reduction parameters to analyses performed at ESS using MCNP6. This requires some limitations in ADVANTG to be overcome and little-known features to be used. The focus of this paper is to describe how these limitations were overcome so other analyst at spallation sources can benefit from these methods as well. [ABSTRACT FROM AUTHOR]

In the development of the European Spallation Source, the engineering phase of the Neutron Beam Extraction System is approaching its end. Currently, prototyping is ongoing to verify and increase the understanding of the manufacturing limitations in relation to the engineering aspects and beam extraction requirements from the instruments. After that the manufacturing of the suite of 16 neutron beam port inserts (NBPI) and light shutter systems (LSS) are phased into final detail design and manufacturing. The NBPIs have been developed as a close collaboration between ESS' instruments design coordinators and intricately integrate a set of copper optics within a controlled atmosphere within the target monolith pressure vessel. The NBPIs therefore includes not only a processed atmosphere but also enables fine alignment of the optics assemblies within it, but also includes a system for inserting it into a very precisely aligned and measured position. Outside the NBPIs, along the neutron beam paths, sits the Neutron Beam Windows and sequentially, the LSS which incorporates an optical bridge beam guide before the beam enters the bunker area and the individual instrument beam transports. ESS have chosen the concept of LSS, which generates demanding requirements for alignment of moving shutter parts. These system parts are placed in the bunker area and bunker basement, areas that are partly accessible during maintenance periods. [ABSTRACT FROM AUTHOR]

64Cu is an emerging radionuclide of great interest in personalized nuclear medicine. It is produced by a cyclotron via the reaction 64Ni(p,n)64Cu. This production method increased during the last decades, because small biomedical cyclotrons can be easily installed close to the nuclear medicine department of a hospital. As a matter of fact, 64Ni is a very expensive target material. For this reason, an alternative 64Cu production method was investigated at ENEA by using the quasi-monochromatic 14 MeV fusion neutron beam made available at the Frascati Neutron Generator (FNG) located at the ENEA – Frascati Research Center. In particular, two nuclear reactions were studied: 65Cu(n,2n)64Cu and 64Zn(n,p)64Cu. The radiochemical analysis of the activated samples was performed at the ENEA-NMLNWM laboratory located in ENEA-Casaccia Research Center. The activity measurements were carried out at the ENEA-INMRI, located in the ENEA-Casaccia Research Center, with high metrological level conditions and by assuring their traceability to the 64Cu primary activity standard here developed and maintained. A prediction of the 64Cu production by means of the high-brilliance 14 MeV neutron source named Sorgentina is also discussed. [ABSTRACT FROM AUTHOR]

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, and EAR2, located 20 m above the target. The facility is based on a lead target impacted by a high-intensity 20 GeV/c proton beam. It is designed to study neutron-nucleus interactions for neutron kinetic energies from a few meV to several GeV, with applications in nuclear astrophysics, nuclear technology, and medical research. The facility is undergoing a major upgrade in 2019–2020, which will include the installation of the new third-generation target. The second-generation target consists in a water-cooled lead cylinder, while the new target will be cooled by nitrogen to avoid erosion-corrosion phenomena and contamination of the cooling water with radioactive lead spallation products. The new design will be optimized also for the vertical flight path. The operation of the new spallation target will start in 2021. This paper presents an overview on the evolution of the design and on the related R&D activities (including beam irradiation tests) carried out to ensure the best performance for both experimental areas and avoid the contamination issues of the previous targets. [ABSTRACT FROM AUTHOR]

The production of high-energy neutrons at the European Spallation Source through the spallation process may cause an erosion of the tungsten target. The eroded particles could be released into the target helium cooling system which contains four kind of filters. Among them, the auxiliary filters called "getters" are designed to capture volatile elements and remaining dust. In this work, the ORNL's SCALE6.2 modelling and simulation suite for nuclear safety analysis is applied to assess shutdown dose rates and determine if added shielding and/or robotic arms are needed for their maintenance. SCALE6.2 is well adapted to treat this problem as it allows for isotope selection regarding source term calculation. Dose rates are determined by an ORIGEN2 source term and a MAVRIC shielding sequence calculation. As SCALE6.2 is non-standard software for ESS, the results are verified against MCNP, which is the baseline tool for neutronics analysis at ESS. Dose rate calculations show that additional shielding and/or robot arm are not needed to remove the getters after 3 months of cooling time, following 5400 h of operation at 5 MW beam power. At a distance of 1 mm from the getter, the dose rate is 0.2 mSv/h in the most conservative estimation. [ABSTRACT FROM AUTHOR]

Beryllium reflectors are used at spallation neutron sources in order to enhance the low-energy flux of neutrons emanating from the surface of a cold and thermal moderator. The design of such a moderator/reflector system is typically carried out using detailed Monte-Carlo simulations, where the beryllium reflector is assumed to behave as a poly-crystalline material. In reality, however, inhomogeneities in the beryllium could lead to discrepancies between the performance of the actual system when compared to the modeled system. The dependence of the total cross-section in particular on crystallite size, in the Bragg scattering region, could influence the reflector performance, and if such an effect is significant, it should be taken into account in the design of the moderator/reflector system. In this paper, we report on the preliminary results of using cross-section libraries, which include corrections for the crystallite size effect, in spallation source neutronics calculations. [ABSTRACT FROM AUTHOR]

The transport of neutrons in long beamlines at spallation neutron sources presents a unique challenge for Monte-Carlo transport calculations. This is due to the need to accurately model the deep-penetration of high-energy neutrons through meters of thick dense shields close to the source and at the same time to model the transport of low- energy neutrons across distances up to around 150 m in length. Typically, such types of calculations may be carried out with MCNP-based codes or alternatively PHITS. However, in recent years there has been an increased interest in the suitability of Geant4 for such types of calculations. Therefore, we have implemented supermirror physics, a neutron chopper module and the duct-source variance reduction technique for low- energy neutron transport from the PHITS Monte-Carlo code into Geant4. In the current work, we present a series of benchmarks of these extensions with the PHITS software, which demonstrates the suitability of Geant4 for simulating long neutron beamlines at a spallation neutron source, such as the European Spallation Source, currently under construction in Lund, Sweden. [ABSTRACT FROM AUTHOR]

HRPD-X is a proposal to completely replace the current high-resolution powder diffractometer (HRPD) at the ISIS Neutron and Muon Source. The new instrument is expected to deliver a factor of four increase in solid-angle coverage. Taking advantage of new detector technology and coupled with a non-magnetic sample tank and improved incident- and diffracted-beam collimation, the new instrument will substantially improve HRPD's scientific capabilities to study magnetic structures and behaviour, high-pressure phenomena and supramolecular structures whilst strengthening its performance in already-established areas. [ABSTRACT FROM AUTHOR]

An experimental procedure is assessed to obtain moderated neutron fields starting from almost monochromatic 14 MeV neutrons generated by means of an accelerator-driven D-T source. The use of a metallic pre-moderator and a standard hydrogen-containing moderator is effective in producing neutron spectra featuring a thermal peak and an epithermal slowing down tail extending up to 14 MeV. The performance of proposed moderation system was investigated by means of MCNP Monte Carlo calculations, benchmarked against experimental measurements using an explorative set up, assembled at the Frascati Neutron Generator. The benchmarked calculations allow at making predictions about the brilliance of a 14 MeV neutron moderator in view of possible applications in neutron science. [ABSTRACT FROM AUTHOR]

The high power target station at the Spallation Neutron Source (SNS) currently has about 20 completed neutron scattering instruments. With a broad coverage of the momentum transfer (Q)-energy (E) space, these instruments serve an extensive user community. In an effort to further expand the scientific capabilities of the SNS instrument suites, we propose a low background, inverse geometry Brillouin inelastic spectrometer for the SNS which will expand the Q-E coverage of the current instrument suite and facilitate the study of inelastic and quasi-elastic scatterings at low Q values. The possible location for the proposed instrument is either beamline 8 which views the decoupled water moderator, or beamline 14A, which views a cold, coupled super critical hydrogen moderator. The instrument parameters, optimizations, and performances at these two beamline locations are discussed. [ABSTRACT FROM AUTHOR]