Search

In this work, the synthesis and catalytic activity of bimetallic Ag–Au nanoparticles (NPs) supported in TiO2 mesoporous thin films (MTFs) are presented. The composite materials were obtained through a two-step procedure, performed at room conditions. In the first step, Ag NPs were grown inside the MTFs by photoreduction. Then, a galvanic replacement reaction with Au was carried out, yielding the bimetallic NPs. The composites were characterized by UV/Vis spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry (XRR), which show that the alloyed Ag–Au NPs are present inside the mesopores. Moreover, Ag and Au composition relationship can be controlled by adjusting the reaction times of the photoreduction and galvanic replacement reactions, respectively. Pores remain accessible after NPs synthesis, a feature that ensures their possible applications in any device that requires the contact between the NPs and the medium. Catalytic activity of the composites towards 4-nitrophenol reduction by sodium borohydride was evaluated. Although all the bimetallic systems exhibit improved catalytic properties in comparison with the monometallic Ag composite, the sample with lower Au/Ag relationship is the most effective. For the first time, to the best of our knowledge, bimetallic Au–Ag NPs are encapsulated inside mesoporous TiO2 films, paving the way towards a wide variety of applications. Fil: Coneo Rodríguez, Rusbel. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes; Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Dispositivos y Sensores; Argentina Fil: Moya, Sergio Eduardo. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Electrónica. Laboratorio de Instrumentación y Control; Argentina. CIC biomaGUNE; España Fil: Bruno, Mariano Martín. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; Argentina Fil: Angelome, Paula Cecilia. Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. - Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología; Argentina

In this work it is shown a precise way to optimize the heat generation in high viscosity magnetic colloids, by adjusting the Neel relaxation time in core/shell bimagnetic nanoparticles, for Magnetic Fluid Hyperthermia applications. To pursue this goal, Fe3O4/ZnxCo1-xFe2O4 core/shell nanoparticles were synthesized with 8.5 nm mean core diameter, encapsulated in a shell of ~1.1 nm of thickness, where the Zn atomic ratio (Zn/(Zn+Co) at%) changes from 33 at% to 68 at%. The magnetic measurements are consistent with a rigid interface coupling between the core and shell phases, where the effective magnetic anisotropy systematically decreases when the Zn concentration increases, without a significant change of the saturation magnetization. Experiments of magnetic fluid hyperthermia of 0.1 wt% of these particles dispersed in water, DMEM (Dulbecco modified Eagles minimal essential medium) and a high viscosity butter oil, result in a large specific loss power (SLP), up to 150 W/g, when the experiments are performed at 571 kHz and 200 Oe. The SLP was optimized adjusting the shell composition, showing a maximum for intermediate Zn concentration. This study shows a way to maximize the heat generation in viscous media like cytosol, for those biomedical applications that requiere smaller particle sizes .

In this work, we studied the cation occupancy of bimagnetic CoO/Co1−xZnxFe2O4 core/shell nanoparticles by means of X-ray absorption and Mossbauer spectroscopies, which provide element-sensitive information at the atomic scale. Our results indicate that, although the spinel ferrite forms a multi-grain shell, the Zn cations occupy solely tetrahedral sites, while the Co cations are mostly in the octahedral site. On the other hand, the Fe cations are distributed in both tetrahedral and octahedral sites for all concentrations. Also the results provide evidence for a Zn-deficient spinel with an excess of Co cations in the shell, whose origin is further rationalized in terms of the two-step synthesis process. In overall, this work gives a description of the cation occupancy in the core/shell nanoparticles and can serve as a guide to the interpretation of the magnetic properties of complex bimagnetic systems for future technological applications.

Superparamagnetic iron oxide nanoparticles (SPIONS) were synthesized by thermal decomposition of an organometallic precursor at high temperature and coated with a bi-layer composed of oleic acid and methoxy-polyethylene glycol-phospholipid. The formulations were named SPION-PEG350 and SPION-PEG2000. Transmission electron microscopy, X-ray diffraction and magnetic measurements show that the SPIONs are near-spherical, well-crystalline, and have high saturation magnetization and susceptibility. FTIR spectroscopy identifies the presence of oleic acid and of the conjugates mPEG for each sample. In vitro biocompatibility of SPIONS was investigated using three cell lines; up to 100μg/ml SPION-PEG350 showed non-toxicity, while SPION-PEG2000 showed no signal of toxicity even up to 200μg/ml. The uptake of SPIONS was detected using magnetization measurement, confocal and atomic force microscopy. SPION-PEG2000 presented the highest internalization capacity, which should be correlated with the mPEG chain size. The in vivo results suggested that SPION-PEG2000 administration in mice triggered liver and kidney injury. From the Clinical Editor The potential use of superparamagnetic iron oxide nanoparticles (SPIONS) in the clinical setting have been studied by many researchers. The authors synthesized two types of SPIONS here and investigated the physical properties and biological compatibility. The findings should provide more data on the design of SPIONS for clinical application in the future.

Transferring CVD graphene using surfactantprotectedAu nanoparticles (Au NPs) avoids the use of PMMAand opens new ways of building heterojunctions for TERS andSERS applications. Thermal treatment removes organics fromthe Au NPs and leads to larger nanoparticles and theformation of networks, dimmers, and nanoplates of variousshapes (circles, hexagons, and triangles). Raman and HRTEMrevealed bilayer graphene and Moirépatterns as determined bythe 2D band and dislocated atomic layers, respectively. TERS performed on the heterojunction exhibits a reversible increase infrequency and sharpening of the characteristic bands in graphene along with the exaltation of bands such as D + D′. A closeexamination into a single triangular-shape nanoplate reveals that the most irregular area of the nanoplate is consistent with thehigher Raman enhancement of Rh6G when compared to other areas of the same feature. This work may shed light onto newways of transferring graphene, fundamental aspects concerning local strains in the heterojunction, and SERS on a single Aunanostructure. Fil: Pérez, Luis Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; Argentina Fil: Dalfovo, Maria Celeste. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentina Fil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina Fil: Soldati, Analía Leticia. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina Fil: Lacconi, Gabriela Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; Argentina Fil: Ibañez, Francisco Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentina

We report a fast method of producing rhodium-decorated platinum nanoparticles (NPs) containing iridium oxides (IrOx) to be used in the glycerol electrooxidation reaction. We synthesize PtIrOx/C electrocatalysts of different atomic compositions dispersed on Carbon Vulcan XC-72R® by using the fast polyol method assisted by microwaves. Afterwards, PtIrOx/C was potentiodynamically decorated by Rh (Rh/PtIrOx/C). The NPs are characterized by energy dispersive X-ray analysis, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. The electrooxidation of glycerol was investigated in acid medium by cyclic voltammetry and chronoamperometry. The electrochemical stability of Rh/PtIrOx/C NPs was evaluated by following a degradation test protocol, which consists in exhaustive cyclic voltammetries. Our results show that the presence of iridium oxides in the architecture of platinum enhances the electrochemical stability of the catalyst by avoiding agglomeration effects. Moreover, the presence of rhodium catalyzes the glycerol electrooxidation reaction. These results help understanding the role of Rh and IrOx in the glycerol electrooxidation and provide new insights for designing nanomaterials with improved stability and activity.

A mixed conducting oxide with a nominal composition Sr(Ti0.3Fe0.7Ru0.07)O3-δ (STFRu) is studied, in comparison with SrTi0.3Fe0.7O3-δ (STF) oxide, as an anode for solid oxide fuel cells. Exposing STFRu to reducing fuel conditions at 800 °C for 4 h results in the exsolution of essentially all of the Ru and a small fraction of the Fe from the oxide, and the formation of Ru1-xFex nanoparticles on the oxide surfaces. Most of the nanoparticles have the hexagonal structure expected for Ru-rich alloys, and thermogravimetric analysis suggests the composition x ∼ 0.2. A small fraction of bcc-structure, presumably Fe-rich, nanoparticles are also detected. Comparison of cells with STFRu and STF anodes shows that the presence of Ru induces a reduced polarization resistance and increases the maximum power density under most cell operating conditions, particularly at lower temperatures and hydrogen partial pressures. For example, at 700 °C and 30% H2 fuel, the maximum power density is 0.1 W cm-2 for STF compared to 0.3 W cm-2 for STFRu. There is also a significant change in the shape of the current-voltage curves and the pH2-dependence of the anode polarization resistances RP,A ∝ (pH2)-m, from m ∼ 0.5-1.0 for STF to m ∼ 0.11-0.29 for STFRu; these suggest that Ru1-xFex nanoparticles improve anode performance by promoting hydrogen adsorption. Fil: Glaser, R.. Northwestern University; Estados Unidos Fil: Zhu, T.. Northwestern University; Estados Unidos Fil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina Fil: Caneiro, Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. YPF - Tecnología; Argentina Fil: Mogni, Liliana Verónica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina Fil: Barnett, S.. Northwestern University; Estados Unidos

Electrically conducting oxides have been proposed as alternatives to Ni-based cermet anodes for solid oxide fuel cells (SOFCs) to overcome issues such as coking and impurity poisoning, but their electrochemical performance is typically inferior to that of Ni-based cermets. Here we show that a new oxide composition, Sr0.95(Ti0.3Fe0.63Ni0.07)O3−δ, yields anode polarization resistance competitive with Ni cermets, and substantially better than that of the corresponding Ni-free compound, SrTi0.3Fe0.7O3−δ. Exposure to fuel results in exsolution and nucleation of Ni0.5Fe0.5 nanoparticles uniformly dispersed on the Ni-substituted perovskite surface, whereas no nanoparticles are observed on SrTi0.3Fe0.7O3−δ. A general thermodynamic model is developed that quantitatively predicts exsolved nanoparticle composition. The reduction in anode polarization resistance by the nanoparticles, by as much as 4 times, is most pronounced at cell operating temperatures below 800°C and low H2 partial pressures, suggesting that the nanoparticles improve performance by promoting H2 adsorption. Mixed conducting perovskite oxides are proposed as alternatives for solid oxide fuel cell anodes, and in situ metallic nanoparticle precipitation/exsolution is considered to improve their performance. However, understanding of exsolution is still lacking, such as the reason why specific cations exsolve from an oxide anode and what determines the exsolved phase composition under various anode conditions. Here we directly compare Sr(Ti,Fe)O3-based anodes with and without exsolved metallic nanoparticles, showing their impact on electrochemical characteristics especially under low anode hydrogen concentrations and low temperatures. Three different methods are used to quantitatively determine the composition of the exsolved (Ni,Fe) nanoparticles, and for the first time demonstrate that this can be achieved through thermogravimetric analysis. This work is the first to propose a detailed thermodynamic theory predicting the exsolved nanoparticle composition with successful experimental verification. Ni-Fe nanoparticles are observed to exsolve from Ni-substituted Sr0.95(Ti0.3Fe0.63Ni0.07)O3−δ anode. The exsolved nanoparticles act to enhance hydrogen dissociative adsorption, yielding much lower anode polarization resistance and higher cell performance, especially under low pH2 and temperatures, which is comparable with the current Ni-based cermets. Fil: Zhu, Tenglong. Northwestern University; Estados Unidos. Nanjing University of Science and Technology; China Fil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina Fil: Mogni, Liliana Verónica. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Han, Minfang. Tsinghua University; China Fil: Barnett, Scott A.. Northwestern University; Estados Unidos

Conjugation of optical and magnetic responses in a unique system at the nanoscale emerges as a powerful tool for several applications. Here, we fabricated bifunctional CoFe2O4-core/ZnO-shell nanoparticles with simultaneous photoluminescence in the visible range and ac magnetic losses suitable for hyperthermia. The structural characterization confirms that the system is formed by a ≈7 nm CoFe2O4 core encapsulated in a ≈1.5-nm-thick semiconducting ZnO shell. As expected from its high anisotropy, the magnetic losses in an ac magnetic field are dominated by the Brown relaxation mechanism. The ac magnetic response of the core/shell system can be accurately predicted by the linear response theory and differs from that one of bare CoFe2O4 nanoparticles as a consequence of changes in the viscous relaxation process due to the effect of the magnetostatic interactions. Concerning the optical properties, by comparing core/shell CoFe2O4/ZnO and single-phase ZnO nanoparticles, we found that the former exhibits a broader optical absorption and photoluminescence, both shifted to the visible range, indicating that the optical properties are closely associated with the shell-morphology of ZnO. Being focused on bifunctional nanoparticles with an optical response in the visible range and a tunable hyperthermia output, our results can help to address current open questions on magnetic fluid hyperthermia. Fil: Lavorato, Gabriel Carlos. Centro Brasileiro de Pesquisas Físicas; Brasil. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina Fil: Lima, Enio Junior. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Vasquez Mansilla, Marcelo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Zysler, Roberto Daniel. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Winkler, Elin Lilian. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina

In this work, we have focused on the size dependence of the magnetic properties and the surface effects of CoFe2O4 nanoparticles synthesized by high-temperature chemical method with diameter d~2, 4.5, and 7 nm, with narrow size distribution. transmission electron microscopy (TEM) images and X-ray diffraction (XRD) profiles indicates that samples with 7 and 4.5 nm present a high crystallinity while the 2 nm sample has a poor one. We have investigated by magnetization measurements and in-field Mössbauer spectroscopy the influence of the surface in the internal magnetic order of the particles. Particles with d=7 nm have almost single domain behavior and the monodomain occupies approximately the whole particle. In the sample with d=4.5 nm the surface anisotropy is large enough to alter the ferrimagnetic order in the particle shell. Then, a surface/volume ratio of ~60% is the crossover between a single domain nanoparticle and a frustrated order in a magnetic core-shell structure, due to the competition between surface anisotropy and exchange interaction+crystalline anisotropy in cobalt ferrite. In the d=2 nm sample the poor crystallinity and the large surface/volume ratio avoid the ferrimagnetic order in the particle down to T=5 K. Fil: Pianciola, Betiana Noelia. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Lima, Enio Junior. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Nagamine, Luiz C.C.M.. Universidade de Sao Paulo; Brasil Fil: Cohen, R.. Universidade de Sao Paulo; Brasil Fil: Zysler, Roberto Daniel. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina

In this research work, DEXTRAN- and polyethyl- ene glycol (PEG)-coated iron-oxide superparamagnetic nano- particles were synthetized and their cytotoxicity and biodistribution assessed. Well-crystalline hydrophobic Fe3O4 SPIONs were formed by a thermal decomposition process with d 5 18 nm and r 5 2 nm; finally, the character of SPIONs was changed to hydrophilic by a post-synthesis pro- cedure with the functionalization of the SPIONs with PEG or DEXTRAN. The nanoparticles present high saturation mag- netization and superparamagnetic behavior at room tempera- ture, and the hydrodynamic diameters of DEXTRAN- and PEG-coated SPIONs were measured as 170 and 120 nm, respectively. PEG- and DEXTRAN-coated SPIONs have a Spe- cific Power Absorption SPA of 320 and 400 W/g, respectively, in an ac magnetic field with amplitude of 13 kA/m and fre- quency of 256 kHz. In vitro studies using VERO and MDCK cell lineages were performed to study the cytotoxicity and cell uptake of the SPIONs. For both cell lineages, PEG- and DEXTRAN-coated nanoparticles presented high cell viability for concentrations as high as 200 lg/mL. In vivo studies were conducted using BALB/c mice inoculating the SPIONs intrave- nously and exposing them to the presence of an external magnet located over the tumour. It was observed that the amount of PEG-coated SPIONs in the tumor increased by up to 160% when using the external permanent magnetic as opposed to those animals that were not exposed to the exter- nal magnetic field. V C

Here we investigate the electrochemical behavior of Pd/C synthesized by reduction with ethylene glycol in the presence of polyvinylpyrrolidone (EG-PVP). EG-PVP produces nanoparticles (NPs) with a narrow size distribution, but some of them remain covered by impurities after the synthesis. After successive voltammetric cycles, NPs become cleaner, but some agglomeration and structural modification occur; these effects affect the electrochemical behavior of Pd/C in different ways, so we used CO as a probe to better understand the processes taking place. CO stripping shows that the general features of the multiple oxidation peaks change with the number of cycles. Possibly, CO and OH from different NPs react when the particles agglomerate, contributing to CO stripping changes. Finally, different active areas are found when the charges involved in CO oxidation and PdO reduction are compared. Such differences are rationalized in terms of a balance between the increase of sites which promote the oxidation of CO and the loss of area provoked by the growing of the particles. Fil: Martins, Cauê A.. Universidade Federal do Mato Grosso do Sul; Brasil Fil: Fernández, Pablo Sebastián. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentina Fil: Troiani, Horacio E.. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Física de Metales; Argentina Fil: Martins, María Elisa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentina Fil: Arenillas de la Puente, Ana. Instituto Nacional del Carbón; España Fil: Camara, Giuseppe A.. Universidade Federal do Mato Grosso do Sul; Brasil

Gold nanoparticles (NP) were synthesized inside ordered mesoporous TiO2 thin films (MTTF) by stepwise reduction of AuCl4 − with NaBH4. This leads to an optical material (Au@TiO2) of interest for plasmonic applications. The films (pure titania or gold-titania nanocomposites) were thoroughly characterized by UV−visible and ellipsometry spectroscopies. The dielectric function of the MTTF, considered as the dielectric environment in which the NP are embedded, was acquired by ellipsometry and rationalized by the asymmetric Bruggeman model as an effective medium formed by the mixture of dense TiO2 and air. Nanocomposite Au@TiO2 systems present an isotropic dispersion of Au NP in the 5−8 nm range. The UV−visible spectra obtained with a low nanoparticle filling fraction of the pore volume (f NP < 2%) are accurately reproduced by both Maxwell−Garnett (MG) and Mie theories. Accurate and coincident values of f NP and NP size are obtained by this method. The dielectric function of Au NP used in this work was studied in detail; in particular, the interface damping parameter related to the NP/MTTF interface was determined by comparison with TEM microscopy. The potential of the ellipsometry technique to determine the material plasmonic response, and its correspondence with the UV−visible spectra, are discussed. This spectroscopy technique opens the possibility to study the plasmon response of the material to changes in the environment due to the presence of vapors, and other in situ experiments, as well as to provide nanostructural information of metallic nanoparticles (NP size, interparticle distance, number of NP) with well-defined spatial localization in a multilayered system. Fil: Sanchez, Veronica Muriel. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Física; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina Fil: Martínez, Eduardo David. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina Fil: Martinez Ricci, Maria Luz. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina Fil: Soler Illia, Galo Juan de Avila Arturo. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Física; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina

International audience; In the past decade, the surprising magnetic behavior of gold nanoparticles has been reported. This unexpected property is mainly attributed both to size and surface effects. Mesoporous thin films are ideal matrices for metallic nanoparticles inclusion, because of their highly accessible and tailorable pore systems that lead to completely tunable chemical environments. Exploiting these features, we synthesized Au nanoparticles within mesoporous titania thin films (film thickness of ∼150 nm and pore diameter of ∼5 nm), and we studied their magnetic properties under confinement. Here, we present the results of the magnetization as a function of temperature and magnetic field for this system, which are consistent with the previously reported for free (unconfined) thiol-capped gold nanoparticles. The successful inclusion of stable magnetic Au nanoparticles within transparent mesoporous thin films opens the gates for the application of these nanocomposites in two-dimensional (2D) microdevices technology and magneto-optical devices.

Nanoparticles (NPs) with magnetic properties based on magnetite (Fe3O4, MAG) modified with oleic acid (OA), chitosan (CS) and bovine serum albumin (BSA) have been prepared. A versatile method of synthesis was employed, involving two steps: (i) co-precipitation of MAG; and (ii) nanoprecipitation of macromolecules on as-formed MAG NPs. Experimental variables have been explored to determine the set of conditions that ensure suitable properties of NPs in terms of their size, functionality and magnetic properties. It was found that the presence of OA in Fe+2/Fe+3 solutions yields MAG NPs with lower aggregation levels, while increasing initial amounts of OA may change the capability of NPs to disperse in aqueous or organic media by modifying the stabilization mechanism. Incorporation of CS was verified through Fourier transform IR spectroscopy. This biopolymer stabilizes NPs by electrostatic repulsions leading to stable ferrofluids and minimal fraction of recoverable solid NPs. BSA was successfully added to NP formulations, increasing their functionality and probably their biocompatibility. In this case too stable ferrofluids were obtained, where BSA acts as a polyelectrolyte. From the proposed methodology it is possible to achieve a wide range of NPs magnetically active intended for several applications. The required properties may be obtained by varying experimental conditions. Fil: Nicolás, Paula. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Planta Piloto de Ingeniería Química (i); Argentina. Universidad Nacional del Sur; Argentina Fil: Saleta, Martin Eduardo. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche); Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche); Argentina Fil: Zysler, Roberto Daniel. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche); Argentina Fil: Lassalle, Verónica Leticia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Instituto de Química del Sur; Argentina. Universidad Nacional del Sur; Argentina Fil: Ferreira, Maria Lujan. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Planta Piloto de Ingeniería Química (i); Argentina. Universidad Nacional del Sur; Argentina

Uniform polycrystalline SnO2 microtubes formed by sintered nanoparticles (fixed to a surface or in free standing form) were obtained with the infiltration technique using SnCl4 as precursor and a porous polycarbonate (PC) film as template. The advantage of this synthesis method was based on its simplicity, reproducibility, low cost, and the possible applicability to other complex oxides. The morphology and crystal structure of SnO2 tubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The crystalline sizes of the nanoparticles assembled in the tube walls obtained at 600 °C were in the range of 5–7 nm, calculated from both the XRD and the TEM data. The length of the microtubes fixed to a silicon nitride surface ranged between 2 and 7 μm. Sensors fabricated with this material showed unusual sensitivity to ethanol at room temperature and fast reversible response, as compared to those obtained by the deposition of metallic tin film and further oxidation (Rheotaxial Growth and Thermal Oxidation method).

This work reports the preparation, characterization and applications of silver nanoparticles synthesized through the chemical reduction of AgNO3 and protected by surface modifier. In order to characterize the formation of nanoparticles and the role of synthesis parameters (time, temperature) several studies were made, such as UV–vis spectroscopy, TEM and AFM. We present the incorporation of Ag nanoparticles in sol–gel obtained matrix, because this technique allows the incorporation of larger concentrations of active optical agents and the obtainment of full-dense films at lower temperature than those possible by other methods. The final goal of this work is the preparation of 80SiO2·20B2O3 films for active optical waveguides doped with Ag nanoparticles and Erbium. We are looking for the reinforcement of the fluorescence intensity due to the effect of the resonant coupling of both optical agents (Er and nanoparticles) to produce optical amplifiers.

Nanoparticles assembled into nanostructures (NAN) of manganese perovskite oxides for different compositions and diameters have been synthesized following a template-assisted method. We discuss the relationship among geometrical, structural and nanostructural parameters observed when synthesizing LaMnO3, La0.66Sr0.33MnO3, La0.66Ca0.33MnO3 and La0.325Pr0.300Ca0.375MnO3 manganite based complex oxides. For all the studied compounds, the structures are composed of an assembly of small (some few tens of nanometers) grains. They form nanotubes above some threshold diameter of the template, and nanowires below it. Here we focus on the correlation between grain size and the diameter at which the tube to wire crossover occurs. The threshold for this tube to wall crossover seems to depend on the specific compound. We present evidence from TEM observations that allow a rationalization of several phenomena in the synthesis process. Fil: Leyva de Guglielmino, Ana Gabriela. Universidad Nacional de San Martín; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes; Argentina Fil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina Fil: Curiale, Carlos Javier. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina Fil: Sanchez, Rodolfo Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina Fil: Levy, Pablo Eduardo. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina

Oat (Avena sativa) biomass was studied as an alternative to recover Au(III) ions from aqueous solutions and for its capacity to reduce Au(III) to Au(0) forming Au nanoparticles. To study the binding trend of Au(III) to oat and the possible formation of Au nanoparticles, the biomass and a solution of Au(III) were reacted for a period of 1 h at pH values ranging from 2 to 6. The results demonstrated that Au(III) ions were bound to oat biomass in a pH-dependent manner, with the highest adsorption (about 80%) at pH 3. HRTEM studies showed that oat biomass reacted with Au(III) ions formed Au nanoparticles of fcc tetrahedral, decahedral, hexagonal, icosahedral multitwinned, irregular, and rod shape. To our knowledge, this is the second report about the production of nanorods as a product of the reaction of a Au(III) solution with a biological material. These studies also showed that the pH of the reaction influenced the nanoparticle size. The smaller nanoparticles and the higher occurrence of these were observed at pH values of 3 and 4, whereas the larger nanoparticles were observed at pH 2. Fil: Armendariz, Veronica. University of Texas at El Paso; Estados Unidos Fil: Herrera, Isaac. University of Texas at El Paso; Estados Unidos Fil: Peralta Videa, Jose R.. University of Texas at El Paso; Estados Unidos. Universidad Nacional Autónoma de México; México Fil: José Yacamán, Miguel. University of Texas at El Paso; Estados Unidos Fil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. University of Texas at Austin; Estados Unidos Fil: Santiago, Patricia. Universidad Nacional Autónoma de México; México Fil: Gardea Torresdey, Jorge L.. University of Texas at El Paso; Estados Unidos

In this work, we studied the dynamic and static magnetic properties of ZnO-core/CoFe2O4-shell and CoO-core/CoFe2O4-shell nanoparticles. Both systems are formed by a core of ∼4 nm of diameter encapsulated in a shell of ∼2 nm of thickness. The mean blocking temperature changes from 106(7) to 276(5) K when the core is diamagnetic or antiferromagnetic, respectively. Magnetic remanence studies revealed the presence of weak dipolar interparticle interactions, where Hint is approximately -0.1 kOe for ZnO/CoFe2O4 and -0.9 kOe for CoO/CoFe2O4, playing a minor role in the magnetic behavior of the materials. Relaxation experiments provided evidence that the magnetization reversal process of CoFe2O4 is strongly dependent on the magnetic order of the core. At 10 K, activation volumes of ∼46(6) and ∼69(5) nm3 were found for CoO/CoFe2O4 and ZnO/CoFe2O4 nanoparticles, respectively, corresponding to one-third and one-fifth of the total shell volume. While the magnetic behavior of ZnO/CoFe2O4 nanoparticles is strongly affected by the surface disorder, the exchange coupling at the CoO/CoFe2O4 interface rules the magnetization reversal and the nanoparticles' thermal stability by inducing a larger energy barrier and promoting smaller switching volume. Fil: Lavorato, Gabriel Carlos. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Consiglio Nazionale delle Ricerche; Italia Fil: Peddis, Davide. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consiglio Nazionale delle Ricerche; Italia Fil: Lima, Enio Junior. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica. Gerencia del Área de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche); Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Agostinelli, Elisabetta. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consiglio Nazionale delle Ricerche; Italia Fil: Fiorani, Dino. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consiglio Nazionale delle Ricerche; Italia Fil: Zysler, Roberto Daniel. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Winkler, Elin Lilian. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina. Argentine Italian Joint Laboratory of Nanomagnetism; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina

A study of the case of superlattices of Au nanoparticles passivated with thiol molecules is presented. The possibility of an orientation relationship among the nanoparticles is analyzed. It is concluded that for the case of Au the relationship does not exist. In-situ experiments in the TEM showing loss of order and the melting conditions are reported and discussed. Different temperature ranges are clearly distinguished for the loss of the thiol-thiol bonds and for the Au nanoparticles-thiol bonds.

In modern nanotechnology one of the most exciting areas is the interaction between inorganic quantum dots and biological structures. For instance gold clusters surrounded by a shell of organic ligands covalently attach to proteins or other biological substances and can be used for labeling in structural biology. In the present report we show the possibility of using live plants for the fabrication of nanoparticles. Alfalfa plants were grown in an AuCl4 rich environment. The absorption of Au metal by the plants was confirmed by X-ray absorption studies (XAS), and transmission electron microscopy (TEM). Atomic resolution analysis confirmed the nucleation and growth of Au nanoparticles inside the plant and that the Au nanoparticles are in a crystalline state. Images also showed defects such as twins in the crystal structure, and in some cases icosahedral nanoparticles were found. X-ray EDS studies corroborated that the nanoparticles are pure gold. This is the first report on the formation of gold nanoparticl...

Metal-porous oxide nanocomposites present great interest in optical devices and heterogeneous catalysis. For these applications, particle shape and size control, as well as accessibility, are critical aspects. In this work, gold nanoparticles (NPs) were infiltrated into mesoporous TiO2 thin films (MTTF) by an impregnation-reduction method. In situ ellipsometry measurements were performed during thermal treatment to follow in real time the changes in the optical constants and thickness of the composites systems while being submitted to continuous heating at different rates, from room temperature up to 600 °C. Complementary characterization by UV–visible spectrophotometry, grazing incident wide angle scattering (GIWAXS), and X-ray reflectometry (XRR) were performed. TEM microscopy was used to analyze the morphological changes in the composite films after the thermal treatment. Our experiments demonstrate that particle coarsening starts at temperatures below 200 °C through the processes of ripening and particle migration, leading to changes in the particle size distribution (PSD) until a mechanical restriction, due to the porous geometry, induces a change of the particle shape from spherical to ellipsoidal. This results in an internal stress that swells the mesoporous film. The effect of the gold filling fraction and the heating ramp was analyzed. A mechanism based on the kinetics of particle migration and coalescence, through the modeling of the localized surface plasmon resonance under the dipolar approximation, is proposed to explain the changes in the optical properties of these composites materials and unravel the thermal activated processes occurring in metal crystallites supported on porous oxide frameworks. Fil: Martínez, Eduardo David. Comisión Nacional de Energía Atómica. Gerencia del Área de Seguridad Nuclear y Ambiente. Gerencia de Química (CAC); Argentina Fil: Cédric, Boissiere. College de France; Francia Fil: Grosso, David. College de France; Francia Fil: Sanchez, Clément. College de France; Francia Fil: Troiani, Horacio Esteban. Comision Nacional de Energia Atomica. Gerencia D/area de Energia Nuclear; Argentina Fil: Galo, J. A. A. Soler Illia. Comisión Nacional de Energía Atómica. Gerencia del Área de Seguridad Nuclear y Ambiente. Gerencia de Química (CAC); Argentina

Since reactor pressure vessel steels are ferromagnetic, provide a convenient means to monitor changes in the mechanical properties of the material upon irradiation with high energy particles, by measuring their magnetic properties. Here, we discuss the correlation between mechanical and magnetic properties and microstructure, by studying the flux effect on the nuclear pressure vessel steel used in reactors currently under construction in Argentina. Charpy-V notched specimens of this steel were irradiated in the RA1 experimental reactor at 275 C with two lead factors (LFs), 93 and 183. The magnetic properties were studied by means of DC magnetometry and ferromagnetic resonance. The results show that the coercive field and magnetic anisotropy spatial distribution are sensitive to the LF and can be explained by taking into account the evolution of the microstructure with this parameter. The saturation magnetization shows a dominant dependence on the accumulated damage. Consequently, the mentioned techniques are suitable to estimate the degradation of the reactor vessel steel. Fil: Kempf, Rodolfo A.. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes. Gerencia de Investigación y Aplicaciones; Argentina Fil: Sacanell, Joaquin Gonzalo. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes. Gerencia de Investigación y Aplicaciones; Argentina Fil: Milano, Julian. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina Fil: Guerra Mendez, Nicolas. Comisión Nacional de Energía Atómica. Centro Atómico Constituyentes. Gerencia de Investigación y Aplicaciones; Argentina Fil: Winkler, Elin Lilian. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina Fil: Butera, Alejandro Ricardo. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina Fil: Troiani, Horacio Esteban. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina Fil: Saleta, Martin Eduardo. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Resonancias Magnéticas; Argentina Fil: Fortis, Ana Maria. Comisión Nacional de Energía Atómica; Argentina

Nanopowders of La0.75Sr0.25Cr0.5Mn0.5O3−δ (LSCM) perovskite-type oxide, potential electrode material for symmetrical solid oxide fuel cell (S-SOFC), have been successfully prepared by the solution combustion method employing glycine as complexing agent and fuel. Several glycine-to-nitrates molar ratios were investigated. A detailed morphological and structural characterization was performed, employing X-ray diffraction, N2 physisorption, and electron microscopy (scanning and transmission). The as-synthesized LSCM nanopowders consist of interconnected nanoparticles forming a sponge-like structure with typical meso- and macropores. For glycine-to-nitrates molar ratios above stoichiometric molar ratio, a high proportion of well-crystallized LSCM phase was obtained. An increase of glycine content in the initial synthesis gel, decreases the average nanoparticles size from ~20 to ~6 nm, narrows the distribution crystallite size, and increases the specific surface area of the LSCM nanopowders from ~14 to ~30 m2/g. The evolution of crystalline phases of the as-synthesized LSCM nanopowders after calcination at various temperatures was studied: pure-phase La0.75Sr0.25Cr0.5Mn0.5O3−δ perovskites with particle-size distribution between 100 and 300 nm, have been obtained after calcination at 1,000 °C for 6 h. The crystalline structural analyses showed that the LSCM nanocrystallites have trigonal/rhombohedral symmetry in the R-3c space group. These final LSCM nanopowders present microstructures with low densification and open porosity but probably with sufficient integrity to enable them to be used as efficient electrodes in S-SOFC.

We report a fully integrated core−shell nanoparticle system responsive to glucose. The system is comprised of self-assembled glucose oxidase and an osmium molecular wire on core−shell Au nanoparticles. Characterization of the functional nanoparticles by spectroscopy, quartz crystal microbalance and electrochemical techniques has shown that the catalytically active shell has a structure as designed and all components are active in the self-assembled multilayer shell. Furthermore, amperometric reagentless detection of glucose and contactless photonic biosensing by the Os(II) resonant Raman signal have been demonstrated. The enzymatic reduction of FAD by glucose and further reduction of the Raman silent Os(III) by FADH2 yields a characteristic enzyme−substrate calibration curve in the millimolar range. Furthermore, coupling of electronic resonant Raman of the osmium complex with the SERS amplification by Au NPs plasmon resonance has been demonstrated which leads to an extra enhancement of the biosensor signal. We present a proof of concept extending the work done with planar surfaces to core−shell NPs as an advance in the design of glucose-responsive chemistry detected by SERS-like methods. Fil: Scodeller, Pablo David. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina Fil: Flexer, Victoria. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina Fil: Szamocki, R.. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina Fil: Calvo, Ernesto Julio. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina Fil: Tognalli, Nicolas Gerardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica; Argentina Fil: Troiani, Horacio Esteban. Comisión Nacional de Energía Atómica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina Fil: Fainstein, Alejandro. Comisión Nacional de Energía Atómica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina

We report on energetic surface reconstruction phenomena observed on bimetallic nanoparticle systems of AuPd and AuCu, similar to a resolidification effect observed during the cooling process in lead clusters. These binary alloy nanoparticles show the fivefold edges truncated, resulting in { 100 } facets on decahedral structures, an effect largely envisioned and reported theoretically, with no experimental evidence so far. We demonstrate experimentally as well as by computational simulations that this new eutectic structure is favored in such nanoalloy systems. Fil: Rodríguez López J. L.. Instituto Potosino de Investigación Científica y Tecnológica ; México Fil: Montejano Carrizales, J. M.. Universidad Autónoma de San Luis Potosí; México Fil: Pal, U.. Universidad Auto´noma de Puebla; México Fil: Sánchez Ramírez, J. F.. Universidad Auto´noma de Puebla; México Fil: Troiani, Horacio Esteban. Comision Nacional de Energía Atómica. Gerencia de Área Investigaciones y Aplicaciones no Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Física de Metales; Argentina Fil: García, D.. The University of Texas; Estados Unidos Fil: Miki Yoshida, M.. The University of Texas; Estados Unidos Fil: José Yacamán, Miguel. The University of Texas; Estados Unidos

The synthesis method for obtaining sub-micrometric structures of rare earth manganese-based mixed oxide compounds is described. Pore wetting of porous polycarbonate templates with the liquid precursor was followed by a two-stage thermal treatment to obtain single phase La0.325Pr0.300Ca0.375MnO3 hollow and solid structures, with external diameter determined by the sacrificial template pore size. The first thermal stage, a microwave assisted denitration process, determines the shape of the structures. The second treatment, performed at 1073 K, allows to obtain the crystallographic structure of the compound. A variety of techniques (scanning and transmission electron microscopy, scanning probe microscopy) allowed to fully characterize the microstructure and morphology of these self-standing manganite nanostructures. For 1 mum pore size templates we obtained tubes, with external diameter around 800 nm and wall thickness around 150 nm; densely packed nanoparticles sized 20-50 nm are the building blocks of the walls. For pore size below 0. 1 mum, solid nanowires were obtained, the size of constituent crystallites being around 10 nm. Overall obtained material exhibits ferromagnetic ordering below 200 K.

The control of the size of bimagnetic nanoparticles represents an important step toward the study of fundamental properties and the design of new nanostructured magnetic materials. We report the synthesis and the structural and magnetic characterization of bimagnetic CoO/CoFe2O4 core/shell nanoparticles. The material was fabricated by a seed-mediated growth high-temperature decomposition method with sizes in the range of 5-11 nm. We show that the core/shell morphology favours the crystallinity of the shell phase, and the reduction of the particle size leads to a remarkable increase of the magnetic hardening. When the size is reduced, the coercive field at 5 K increases from 21.5 kOe to 30.8 kOe, while the blocking temperature decreases from 388 K to 167 K. The size effects on the magnetic behaviour are described through a phenomenological model for strongly ferri-/antiferromagnetic coupled phases.

We present experimental evidence on the physical origin of a magnetic dead layer (MDL) in manganite nanoparticles. The studied nanoparticles constitute the wall of La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3 manganite nanotubes. Magnetic properties analysis and high resolution transmission electron microscopy show a shell of approximately 2 nm thickness with different properties from the core. In this shell the atoms are in a noncrystalline array that perfectly explains the 50% reduction of the magnetization compared to the bulk. Moreover, we present experimental evidence that the internal magnetic structure of the MDL is constituted by small ferromagnetic clusters in a frustrated configuration.

La1-xSrxCo1-yFeyO3-? oxides are good candidates for solid oxide fuel cell (SOFC) cathodes because these materials present high ionic and electronic conductivity, and compatibility with Cerium Gadolinium Oxide (CGO) electrolytes allowing a lower operation temperature. In this work, we report the synthesis of La0.4Sr0.6Co0.8Fe0.2O3-? (LSCF) nanotubes prepared by a porous polycarbonate membrane approach, obtaining different microstructures depending on sintering conditions. The structure and morphology of the nanotubes and deposited films were characterized by X-ray diffraction, transmission and scanning microscopy. Finally, we obtained nanostructured films of vertically aligned LSCF tubes deposited over the whole surface of CGO pellets with diameter up to 2.5cm in a direct and single step process.

We report a simple and effective way to control the heat generation of a magnetic colloid under alternate magnetic fields by changing the shell composition of bimagnetic core-shell Fe3O4/ZnxCo1-xFe2O4 nanoparticles. The core-shell structure constitutes a magnetically-coupled biphase system, with an effective anisotropy that can be tuned by the substitution of Co2+ by Zn2+ ions in the shell. Magnetic hyperthermia experiments of nanoparticles dispersed in hexane and butter oil showed that the magnetic relaxation is dominated by Brown relaxation mechanism in samples with higher anisotropy (i.e., larger concentration of Co within the shell) yielding high specific power absorption values in low viscosity media as hexane. Increasing the Zn concentration of the shell, diminishes the magnetic anisotropy, which results in a change to a Neel relaxation that dominates the process when the nanoparticles are dispersed in a high-viscosity medium. We demonstrate that tuning the Zn contents at the shell of these exchange-coupled core/shell nanoparticles provides a way to control the magnetic anisotropy without loss of saturation magnetization. This ability is an essential prerequisite for most biomedical applications, where high viscosities and capturing mechanisms are present.