Search

Numerical investigations are presented for mixed convection problems in a concentric inner sinusoidal cylinder and an outer rotating circular cylinder, which were kept at constant hot and cold temperatures, respectively. The free space between the cylinders and the enclosure walls was filled with a water‐Cu nanofluid. The governing equations are formulated for velocity, pressure, and temperature formulation and are modeled in COMSOL5.2a, a partial differential equation solver based on the Galerkin finite element method. The governing parameters considered are the solid volume fraction, [0, 0.02, 0.04, and 0.06], Re (1, 25, 100, 200, and 300), and Ra (less than 104), and the inner cylinder corrugation frequencies varied from (N = 3, 6, and 9). According to the calculations, the Reynolds number, the Rayleigh number, the nanoparticle volume fraction, and the number of corrugations play an important role of forming the stream and isothermal lines, the local and the average Nusselt number inside the annulus enclosure. The average Nusselt number decreases with increasing Reynolds number and the number of corrugations, while it increases as the Rayleigh number and the volume fraction increase. [ABSTRACT FROM AUTHOR]

Taking a more complex engineering geometry into account, magnetohydrodynamic natural convection of nanofluid (Cu-water) in a wavy walled enclosure having a circular hot cylinder inside is investigated by employing Galerkin-weighted residual formulation. In order to investigate the flow and heat transfer characteristics from several perspectives and increase the ability of adaptation to various engineering applications, the influences of the Hartmann number, Ha , Rayleigh number, Ra , and nanoparticle concentration are examined in detail. In addition to that, heat generation and heat absorption situations are also considered within the present work, which are simulated by a heat coefficient in a range of −10 ≤ q ≤ +10. The results revealed that increasing Ha has an insignificant effect on Nusselt number, Nu , at low Ra , however, it significantly pulls Nu down up to 33% for higher Ra , because of restricting convection. It is found that the heat coefficient, q , has a remarkable impact on Nu at low Ra , while its significance is diminished when Ra is increased. For q < 0, the heat absorption creates a heat sink, which increases Nu up to 34%, while the heat generation (q > 0) conversely reduces Nu up to 48%. Besides, variation in heat coefficient does not considerably affect the improvement impact of nanoparticles. • MHD natural convection of nanofluid is studied in a wavy enclosure with a cylinder. • Heat generation and absorption are more significant at low Ra. • Ra and q are the most effective parameters for Nu. • Ha and q considerably loses its significance at high Ra. • High Hartmann numbers may restrict convection by up to 33%. [ABSTRACT FROM AUTHOR]