Search

Introduction: Deep, second- and third-degree burn injuries may lead to irreversible damage to the traumatized tissue and to coagulation or thrombosis of the microvessels, further compromising wound healing. Engineered, morphologically gradient drug-eluting nanofiber dressings promote wound healing by mimicking tissue structure and providing sustained drug delivery, which is particularly beneficial for wound management., Methods: This study exploited a resorbable, radially aligned nanofiber dressing that provides the sustained gradient release of metformin at the wound site using a pin-ring electrospinning technique and a differential membrane-thickness approach., Results: The experimental results suggested that the electrospun nanofibrous dressings exhibited uniform and radially oriented fiber distributions. In vitro, these dressings offered an extended release of metformin for 30 d. The incorporation of water-soluble metformin significantly enhanced the hydrophilicity of the nanofiber membranes. Moreover, the in vivo burn-wound-healing model of rats showed that the radially aligned gradient metformin-eluting poly(lactic-co-glycolic acid) (PLGA) nanofibers exhibited significantly superior healing capability compared to the pristine PLGA, metformin-eluting, and control dressings. Histological images showed that the mesh/nanofibers produced no adverse effects., Conclusion: The findings in this study emphasize the potential of resorbable, radially aligned nanofiber dressings as advanced wound care solutions, offering broad applicability and meaningful clinical impact., Competing Interests: The authors declare no conflict of interest regarding the publication of this paper., (© 2024 Chen et al.)

Small joint reconstruction remains challenging and can lead to prosthesis-related complications, mainly due to the suboptimal performance of the silicone materials used and adverse host reactions. In this study, we developed hybrid artificial joints using three-dimensional printing (3D printing) for polycaprolactone (PCL) and incorporated electrospun nanofibers loaded with drugs and biomolecules for small joint reconstruction. We evaluated the mechanical properties of the degradable joints and the drug discharge patterns of the nanofibers. Empirical data revealed that the 3D-printed PCL joints exhibited good mechanical and fatigue properties. The drug-eluting nanofibers sustainedly released teicoplanin, ceftazidime, and ketorolac in vitro for over 30, 19, and 30 days, respectively. Furthermore, the nanofibers released high levels of bone morphogenetic protein-2 and connective tissue growth factors for over 30 days. An in vivo animal test demonstrated that nanofiber-loaded joints released high concentrations of antibiotics and analgesics in a rabbit model for 28 days. The animals in the drug-loaded degradable joint group showed greater activity counts than those in the surgery-only group. The experimental data suggest that degradable joints with sustained release of drugs and biomolecules may be utilized in small joint arthroplasty., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Herpes simplex and herpes zoster are both viral infections caused by members of the herpesvirus family. The former is characterized by painful, fluid-filled blisters or sores on the skin and mucous membranes, while the latter presents as a painful rash with blisters, typically occurring in a single band or patch along one side of the body. The treatment remains a challenge since current antiviral therapy via oral administration may lead to unfavorable side effects such as headaches, nausea, and diarrhea. This study used electrospinning to develop biodegradable nanofibrous poly(lactic-co-glycolic acid) (PLGA) membranes for delivery of both acyclovir and ketorolac. The structure of the spun nanofibers was assessed via scanning electron microscopy (SEM), and the appearance of loaded acyclovir and ketorolac in the nanofibers was confirmed with Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). Release profiles of these drugs from the nanofibrous membranes were assessed using in vitro elution studies, high-performance liquid chromatography (HPLC) assays, and in vivo drug release patterns. The electrospun nanofibers had a size range of 283-725 nm in diameter, resembling the extracellular matrix of natural tissue and demonstrated excellent flexibility and extensibility. Notably, the drug-eluting nanofibers exhibited an extended release of high levels of acyclovir and ketorolac over a 21-day period. Thus, biodegradable drug-eluting membranes with a prolonged drug release could be a potential therapeutic approach for treating herpes infections., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The treatment and surgical repair of torn Achilles tendons seldom return the wounded tendon to its original elasticity and stiffness. This study explored the in vitro and in vivo simultaneous release of indomethacin and bupivacaine from electrospun polylactide-polyglycolide composite membranes for their capacity to repair torn Achilles tendons. These membranes were fabricated by mixing polylactide-polyglycolide/indomethacin, polylactide-polyglycolide/collagen, and polylactide-polyglycolide/bupivacaine with 1,1,1,3,3,3-hexafluoro-2-propanol into sandwich-structured composites. Subsequently, the in vitro pharmaceutic release rates over 30 days were determined, and the in vivo release behavior and effectiveness of the loaded drugs were assessed using an animal surgical model. High concentrations of indomethacin and bupivacaine were released for over four weeks. The released pharmaceutics resulted in complete recovery of rat tendons, and the nanofibrous composite membranes exhibited exceptional mechanical strength. Additionally, the anti-adhesion capacity of the developed membrane was confirmed. Using the electrospinning technique developed in this study, we plan on manufacturing degradable composite membranes for tendon healing, which can deliver sustained pharmaceutical release and provide a collagenous habitat.

This study aimed to develop a drug delivery system with hybrid biodegradable antifungal and antibacterial agents incorporated into poly lactic-co-glycolic acid (PLGA) nanofibers, facilitating an extended release of fluconazole, vancomycin, and ceftazidime to treat polymicrobial osteomyelitis. The nanofibers were assessed using scanning electron microscopy, tensile testing, water contact angle analysis, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The in vitro release of the antimicrobial agents was assessed using an elution method and a high-performance liquid chromatography assay. The in vivo elution pattern of nanofibrous mats was assessed using a rat femoral model. The experimental results demonstrated that the antimicrobial agent-loaded nanofibers released high levels of fluconazole, vancomycin, and ceftazidime for 30 and 56 days in vitro and in vivo, respectively. Histological assays revealed no notable tissue inflammation. Therefore, hybrid biodegradable PLGA nanofibers with a sustainable release of antifungal and antibacterial agents may be employed for the treatment of polymicrobial osteomyelitis.

Introduction: In this study, simvastatin-incorporated poly(D,L-lactide-co-glycolide) (PLGA) nanofibrous mats were fabricated via electrospinning, and their efficacy in the repair of the Achilles tendon was evaluated., Methods: The morphology of spun nanofibers and the in vitro drug release kinetics were assessed, while the in vivo efficacy in tendon repair was tested using a rat model., Results: Images obtained by scanning electron microscopy revealed that spun nanofibers exhibit a porous structure with a fiber diameter of approximately 350 nm. Fourier-transform infrared spectrometry and differential scanning calorimetry demonstrated successful incorporation of pharmaceutical agents into the PLGA nanofibers. The drug-loaded nanofibrous membranes sustainably discharged high concentrations of simvastatin for >28 days at the target site, and drug concentrations in blood were low. Tendons repaired using simvastatin-eluting nanofibers exhibited superior mechanical strength and animal activities to those repaired without nanofibers or with pure PLGA nanofibers., Discussion: Simvastatin-loaded nanofibers demonstrated effectiveness and sustainable capability for the repair of Achilles tendons. Eventually biodegradable drug-eluting nanofibrous mats may be used in humans for the treatment of tendon ruptures., Competing Interests: The authors declare no conflicts of interest in this work., (© 2022 Weng et al.)

Despite progress in clinical science, the repair and restoration of alveolar bone defects remains as a challenge, particularly for nonuniform and complex defects. We developed bioresorbable nanofibrous drug-eluting cuboid frames for alveolar bone repair using three-dimensional (3D) printing and electrospinning technologies. The cuboid frames comprised polylactide (PLA) cages and ketorolac and amoxicillin-loaded poly(lactic-co-glycolic acid) nanofibers that imitated the morphology of the natural extracellular matrix of bone tissues. Characteristics of the printed frame and electrospun nanofibers were evaluated. The in vitro and in vivo release characteristics of the drugs embedded in the nanofibers were estimated using a high-performance liquid chromatography assay. In addition, the in vivo efficacies of the PLA cuboid frame and drug-eluting nanofibers for the treatment of alveolar bone defects were evaluated in a rat model. The experimental data indicated that the nanofibrous PLA frame provided a sustained release of ketorolac and amoxicillin for over 4 weeks. The results of the in vivo animal test also indicated that the animals that were implanted with the drug-eluting cuboid frame exhibited significantly greater movement than the animals with no frame. Histological analysis revealed no sign of adverse effects of the drug-eluting frames. By adopting 3D printing and electrospinning technologies, resorbable drug-eluting cuboid frames can be successfully manufactured for maxillofacial applications., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A novel hybrid biodegradable Nuss bar model was developed to surgically correct the pectus excavatum and reduce the associated pain during treatment. The scheme consisted of a three-dimensional (3D) printed biodegradable polylactide (PLA) Nuss bar as the surgical implant and electrospun polylactide-polyglycolide (PLGA) nanofibers loaded with lidocaine and ketorolac as the analgesic agents. The degradation rate and mechanical properties of the PLA Nuss bars were characterized after submersion in a buffered mixture for different time periods. In addition, the in vivo biocompatibility of the integrated PLA Nuss bars/analgesic-loaded PLGA nanofibers was assessed using a rabbit chest wall model. The outcomes of this work suggest that integration of PLA Nuss bar and PLGA/analgesic nanofibers could successfully enhance the results of pectus excavatum treatment in the animal model. The histological analysis also demonstrated good biocompatibility of the PLA Nuss bars with animal tissues. Eventually, the 3D printed biodegradable Nuss bars may have a potential role in pectus excavatum treatment in humans.

Purpose: Postoperative infection and pain management are of great concern to orthopedic surgeons. Although there are several protocols available to deal with these aspects, they are fraught with complications, such as cartilage damage, cardiovascular and neurological intoxication, and systemic adverse responses. Therefore, it is necessary to develop safe and effective perioperative protocols. In the current study, antimicrobial agents/analgesics/growth factor-embedded biodegradable hybrid fixators (polycaprolactone fixator + poly[lactide-co-glycolide] sheath-core structured nanofibers) for bone fracture repair were designed., Methods: The biodegradable hybrid fixators were fabricated using solution-extrusion three-dimensional printing and electrospinning. In vitro, the characteristics of the hybrid fixators were examined. Additionally, the release of the incorporated vancomycin, ceftazidime, lidocaine, and bone morphogenetic protein-2 (BMP-2) was evaluated. The in vivo efficacy including drug-eluting properties, fracture repair, and pain management of the biomolecule-loaded nanofibrous fixators was investigated in rabbit rib-fracture models., Results: The nanofibrous fixators released vancomycin, ceftazidime, and lidocaine in a sustained manner under both in vitro and in vivo conditions and protected BMP-2 from burst release. The implantation of these hybrid fixators around the fractured rib significantly improved animal activities and bone union, indicating that the inclusion of analgesic in the fixator effectively reduced postsurgical pain and thereby helped in recovery., Conclusion: The novel biomolecule-loaded nanofibrous hybrid fixators resulted in excellent therapeutic outcomes. These fixators may be effective in the repair of rib fractures in clinical settings and may help mitigate surgical complications, such as infection, nonunion, and intolerable postoperative pain., Competing Interests: The authors declare that they have no competing interests., (© 2021 Yu et al.)

Background: Postoperative tissue adhesion is a major concern for most surgeons and is a nearly unpreventable complication after abdominal or pelvic surgeries. This study explored the use of sandwich-structured antimicrobial agents, analgesics, and human epidermal growth factor (hEGF)-incorporated anti-adhesive poly(lactic-co-glycolic acid) nanofibrous membranes for surgical wounds., Materials and Methods: Electrospinning and co-axial electrospinning techniques were utilized in fabricating the membranes. After spinning, the properties of the prepared membranes were assessed. Additionally, high-performance liquid chromatography and enzyme-linked immunosorbent assays were utilized in assessing the in vitro and in vivo liberation profiles of the pharmaceuticals and the hEGF from the membranes., Results: The measured data suggest that the degradable anti-adhesive membranes discharged high levels of vancomycin/ceftazidime, ketorolac, and hEGF in vitro for more than 30, 24, and 27 days, respectively. The in vivo assessment in a rat laparotomy model indicated no adhesion in the peritoneal cavity at 14 days post-operation, demonstrating the anti-adhesive capability of the sandwich-structured nanofibrous membranes. The nanofibers also released effective levels of vancomycin, ceftazidime, and ketorolac for more than 28 days in vivo. Histological examination revealed no adverse effects., Conclusion: The outcomes of this study implied that the anti-adhesive nanofibers with sustained release of antimicrobial agents, analgesics, and growth factors might offer postoperative pain relief and infection control, as well as promote postoperative healing of surgical wounds., Competing Interests: The authors report no conflicts of interest in this work., (© 2021 Liu et al.)

More than half of diabetic wounds demonstrate clinical signs of infection at presentation and lead to poor outcomes. This work develops coaxial sheath-core nanofibrous poly(lactide- co -glycolide) (PLGA) scaffolds that are loaded with bioactive antibiotics and platelet-derived growth factor (PDGF) for the repair of diabetic infectious wounds. PDGF and PLGA/antibiotic solutions were pumped, respectively, into two independent capillary tubings for coaxial electrospinning to prepare biodegradable sheath-core nanofibers. Spun nanofibrous scaffolds sustainably released PDGF, vancomycin, and gentamicin for 3 weeks. The scaffolds also reduced the phosphatase and tensin homologue content, enhanced the amount of angiogenesis marker (CD31) around the wound area, and accelerated healing in the early stage of infected diabetic wound repair. Antibiotic/biomolecule-loaded PLGA nanofibers may provide a very effective way to aid tissue regeneration at the sites of infected diabetic wounds.

Introduction: Masquelet proposed a new solution for the healing of segmental bone defects, thus minimizing the disadvantages associated with traditional bone grafting. However, a major factor leading to the failure of this technique pertains to be the residual infection. Accordingly, we developed an antibiotic- and osteo-inductive agent-loaded composite scaffold to solve this problem., Methods: A mesh-like polycaprolactone scaffold was prepared using a lab-exploited solution-type three-dimensional printer, and hybrid sheath-core structured poly(lactic-co-glycolic-acid) nanofibers were fabricated using co-axial electrospinning technology. Vancomycin, ceftazidime, and bone morphological protein (BMP)-2 were employed. The in vitro and in vivo (rabbit fracture model) release patterns of applied agents from the composite scaffold were investigated., Results: The results revealed that the drug-eluting composite scaffold enabled the sustainable release of the medications for at least 30 days in vitro. Animal tests demonstrated that a high concentration of medications was maintained. Abundant growth factors were induced within the bioactive membrane stimulated by the applied scaffold. Finally, satisfactory bone healing potential was observed on radiological examination and biomechanical evaluation., Discussion: The developed composite scaffold may facilitate bone healing by inducing bioactive membrane formation and yielding high concentrations of antibiotics and BMP-2 during the Masquelet procedure., Competing Interests: The authors report no conflicts of interest in this work., (© 2020 Yu et al.)

Patients with diabetes mellitus have up to a 15% lifetime risk of non-healing and poorly healing wounds. This work develops core-shell nanofibrous bioactive insulin-loaded poly-D-L-lactide-glycolide (PLGA) scaffolds that release insulin in a sustained manner for repairing wounds in diabetic rats. To prepare the biodegradable core-shell nanofibers, PLGA and insulin solutions were fed into two capillary tubes of different sizes that were coaxially electrospun using two independent pumps. The scaffolds sustainably released insulin for four weeks. The hydrophilicity and water-containing capacity of core-shell nanofibrous insulin/PLGA scaffolds significantly exceeded those of blended nanofibrous scaffolds. The nanofibrous core-shell insulin-loaded scaffold reduced the amount of type I collagen in vitro, increased the transforming growth factor-beta content in vivo, and promoted diabetic would repair. The core-shell insulin-loaded nanofibrous scaffolds prolong the release of insulin and promote diabetic wound healing., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Background: Despite recent advancements in surgical techniques, the repair of tendon rupture remains a challenge for surgeons. The purpose of this study was to develop novel doxycycline-loaded biodegradable nanofibrous membranes and evaluate their efficacy for the repair of Achilles tendon rupture in a rat model., Materials and Methods: The drug-loaded nanofibers were prepared using the electrospinning process and drug release from the prepared membranes was investigated both in vitro and in vivo. Furthermore, the safety and efficacy of the drug-loaded nanofibrous membranes were evaluated in rats that underwent tendon surgeries. An animal behavior cage was employed to monitor the post-surgery activity of the animals., Results: The experimental results demonstrated that poly(D,L-lactide-co-glycolide) (PLGA) nanofibers released effective concentrations of doxycycline for more than 40 days post-surgery, and the systemic plasma drug concentration was low. Rats receiving implantation of doxycycline-loaded nanofibers also showed greater activities and stronger tendons post-operation., Conclusion: Nanofibers loaded with doxycycline may have great potential in the repair of Achilles tendon rupture., Competing Interests: The authors declare that there are no conflicts of interest in this work., (© 2020 Weng et al.)

Background: The high lifetime risk of vascular disease is one of the important issues that plague patients with diabetes mellitus. Systemic oral vildagliptin administration favors endothelial recovery and inhibits smooth muscle cell (SMC) proliferation. However, the localized release of vildagliptin in the diabetic vessel damage has seldom been investigated., Research Design and Methods: In this work, nanofiber-eluting stents that loaded with vildagliptin, a dipeptidyl peptidase-4 enzyme (DPP-4) inhibitor, was fabricated to treat diabetic vascular disease. To prepare nanofibers, the poly (D,L)-lactide-co-glycolide (PLGA) and vildagliptin were mixed using hexafluoroisopropanol and electrospinning process. In vitro and in vivo release rates of the vildagliptin were characterized using high-performance liquid chromatography., Results: Effective vildagliptin concentrations were delivered for more than 28 days from the nanofibrous membranes coating on the surface of the stents in vitro and in vivo. The vildagliptin-eluting PLGA membranes greatly accelerated the recovery of diabetic endothelia and reduced SMC hyperplasia. The type I collagen content of the diabetic vascular intimal area that was treated by vildagliptin-eluting stents was lower than that of the non-vildagliptin-eluting group., Conclusion: The experimental results revealed that stenting with vildagliptin-eluting PLGA membranes could potentially promote healing for diabetic arterial diseases., Competing Interests: The authors report no conflicts of interest with respect to this work., (© 2019 Lee et al.)

Background: This study exploited sheath-core-structured lidocaine/human EGF (hEGF)-loaded anti-adhesive poly[(d,l)-lactide-co-glycolide] (PLGA) nanofibrous films for surgical wounds via a co-axial electrospinning technique. Materials and methods: After spinning, the properties of the co-axially spun membranes were characterized by scanning electron microscopy, laser-scanning confocal microscopy, Fourier Transform Infrared spectrometry, water contact angle measurements, and tensile tests. Furthermore, a HPLC analysis and an ELISA evaluated the in vitro and in vivo release curves of lidocaine and hEGF from the films. Results: PLGA anti-adhesion nanofibers eluted high levels of lidocaine and hEGF for over 32 and 27 days, respectively, in vitro. The in vivo evaluation of post-surgery recovery in a rat model demonstrated that no adhesion was noticed in tissues at 2 weeks after surgery illustrating the anti-adhesive performance of the sheath-core-structured nanofibers. Nanofibrous films effectively released lidocaine and hEGF for >2 weeks in vivo. In addition, rats implanted with the lidocaine/hEGF nanofibrous membranes exhibited greater activities than the control demonstrating the pain relief efficacy of the films. Conclusion: The empirical outcomes suggested that the anti-adhesive nanofibrous films with extended release of lidocaine and hEGF offer post-operative pain relief and wound healing., Competing Interests: The authors report no conflicts of interest in this work.

Background: In this study, we developed biodegradable andrographolide (AG)-eluting nanofibrous mats and evaluated their efficacy in treating cervical cancer., Materials and Methods: Membranes of two different poly[(d,l)-lactide- co -glycolide] (PLGA)-to-AG ratios (6:1 and 3:1) were prepared via electrospinning technology. The liberation behavior of AG was evaluated. A cervical cancer model with C57BL/6J mice was created and employed for an in vivo efficacy assessment of the drug-eluting nanofibers. Twelve mice with cervical cancer were stochastically divided into three different groups (four animals per group): group A received no treatment as the control, group B was treated with pure PLGA mats, and group C was treated with AG-loaded nanofibrous membranes. The changes in tumor sizes were recorded., Results: All membranes eluted high concentrations of AG at the target area for three weeks, while the systemic drug concentration in the blood remained low. Histological analysis showed no obvious tissue inflammation. Compared with the mice in groups A and B, the tumor size of the mice in group C decreased with time until day 25, when the daily drug concentration reduced to 3 µg/mL., Conclusion: Biodegradable nanofibers with a sustainable release of AG exhibit adequate efficacy and durability for the treatment of mice with cervical cancer., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

Background: The most common complaint after the Nuss procedure is severe postoperative chest pain. The aim of this study was to evaluate the effectiveness of analgesic-eluting biodegradable nanofibers in pain relief after the Nuss procedure., Materials and Methods: Poly(d,l)-lactide-co-glycolide, lidocaine, and ketorolac were dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol. This solution was electrospun into a nanofibrous membrane. The elution method and high-performance chromatography were used to characterize the in vitro drug release. Stainless steel bars with and without coating of the analgesic-eluting nanofibrous membrane were implanted underneath the sternums of New Zealand white rabbits. The in vivo characteristics were further investigated., Results: The in vitro study showed that the biodegradable nanofibers released high doses of lidocaine and ketorolac within 10 days. The in vivo study demonstrated high local and systemic concentrations of lidocaine and ketorolac. The serum creatinine level was unaffected. Animals that received implants of the analgesic-eluting nanofiber-coated stainless steel bar exhibited significantly greater food and water ingestion and physical activity than the control group did, indicating effective pain relief., Conclusion: The proposed analgesic-eluting biodegradable nanofibers contribute to the achievement of extended pain relief after the Nuss procedure, without obvious adverse effects, in an animal model., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

Objective: The current treatment of atherosclerotic coronary heart disease with limus-eluting stents can lead to incomplete endothelialization and substantial impairment of arterial healing relative to treatment with bare-metal stents. The sustained and local delivery of ticagrelor, a reversibly binding P2Y12 receptor inhibitor, using hybrid biodegradable nanofibers/stents, was developed to reduce neointimal formation and endothelial dysfunction., Methods: In this investigation, a solution of ticagrelor, poly(D,L)-lactide-co-glycolide, and hexafluoro isopropanol was electrospun to fabricate ticagrelor-eluting nanofibrous drug-eluting stents. The in vitro and in vivo ticagrelor concentrations were measured using a high-performance liquid chromatography assay. The effectiveness of ticagrelor-eluting stents was examined relative to that of sirolimus-eluting stents., Results: Adequate ticagrelor levels were detected for four weeks in vitro. Less HES5-positive labeling was found near the ticagrelor-eluting stented vessels (0.33±0.12) than close to the sirolimus-eluting stented vessels (0.57±0.15) ( p <0.05). Four weeks after deployment, the ticagrelor-eluting stent also exhibited an up-regulated local expression of SOD1 in the stenting area ( p <0.001). The ticagrelor-eluting stent substantially preserved endothelial function and re-endothelialization, minimized inflammatory responses, and inhibited neointimal hyperplasia., Conclusion: Ticagrelor-eluting stents may provide an alternative route for treating patients at a high risk of bleeding to preserve endothelial recovery and to reduce smooth muscle proliferation., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

A novel bifurcation stent coated with bioabsorbable nanofibers that deliver the extended and controlled release of rosuvastatin and paclitaxel was developed. Bioabsorbable bifurcation stents, consisting of a double-slit tubular main body and two spiral branches, were manufactured. Bi-layered poly (lactic-co-glycolic acid) nanofibers that contained rosuvastatin and paclitaxel were used for treating the stents. Various properties of the fabricated stents, including compression strengths, collapse pressure, water contact angle and flow properties within a circulation model, were quantified. In vitro nanofibrous elution chromatography assays from the drug-loading bifurcation stents were carried out for the release patterns of pharmaceuticals. The effectiveness of eluted rosuvastatin and paclitaxel in inhibiting the adhesion of platelets as well as the proliferation of smooth muscle cells (SMCs) were studied, respectively. The experimental results suggest that bioabsorbable nanofibrous bifurcation stents released high concentrations of rosuvastatin and paclitaxel for 27 and 70 days, respectively. The eluted drugs of rosuvastatin and paclitaxel effectively reduced adherent platelets and the proliferation of SMCs. The developed bioabsorbable nanofibrous bifurcation stents herein may provide a promising means of treating cardiovascular bifurcation lesions., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Chemotherapy is ineffective for treating malignant glioma (MG) because of the low therapeutic levels of pharmaceuticals in tumour tissues and the well-known tumour resistance. The resistance to alkylators is modulated by the DNA repair protein O 6 -alkylguanine-DNA alkyltransferase (AGT). O 6 -benzylguanine (O 6 -BG) can irreversibly inactivate AGT by competing with O 6 -methylguanine and has been confirmed to increase the therapeutic activity of alkylators. We developed hybrid-structured poly[(d,l)-lactide-co-glycolide] nanofibrous membranes (HSNMs) that enable the sequential and sustained release of O 6 -BG and two alkylators (carmustine and temozolomide [TMZ]). HSNMs were surgically instilled into the cerebral cavity of pathogen-free rats and F98 glioma-bearing rats. The release behaviours of loaded drugs were quantified by using high-performance liquid chromatography. The treatment results were compared with the rats treated with intraperitoneal injection of O 6 -BG combined with surgical implantation of carmustine wafer and oral TMZ. The HSNMs revealed a sequential drug release behaviour with the elution of high drug concentrations of O 6 -BG in the early phase, followed by high levels of two alkylators. All drug concentrations remained high for over 14 weeks. Tumour growth was slower and the mean survival time was significantly prolonged in the HSNM-treated group. Biodegradable HSNMs can enhance therapeutic efficacy and prevent toxic systemic effects.

Glioblastoma is the most frequent and devastating primary brain tumor. Surgery followed by radiotherapy with concomitant and adjuvant chemotherapy is the standard of care for patients with glioblastoma. Chemotherapy is ineffective, because of the low therapeutic levels of pharmaceuticals in tumor tissues and the well-known tumor-cell resistance to chemotherapy. Therefore, we developed bilayered poly(d,l)-lactide- co -glycolide nanofibrous membranes that enabled the sequential and sustained release of chemotherapeutic and antiangiogenic agents by employing an electrospinning technique. The release characteristics of embedded drugs were determined by employing an in vitro elution technique and high-performance liquid chromatography. The experimental results showed that the fabricated nanofibers showed a sequential drug-eluting behavior, with the release of high drug levels of chemotherapeutic carmustine, irinotecan, and cisplatin from day 3, followed by the release of high concentrations of the antiangiogenic combretastatin from day 21. Biodegradable multidrug-eluting nanofibrous membranes were then dispersed into the cerebral cavity of rats by craniectomy, and the in vivo release characteristics of the pharmaceuticals from the membranes were investigated. The results suggested that the nanofibrous membranes released high concentrations of pharmaceuticals for more than 8 weeks in the cerebral parenchyma of rats. The result of histological analysis demonstrated developmental atrophy of brains with no inflammation. Biodegradable nanofibrous membranes can be manufactured for long-term sequential transport of different chemotherapeutic and anti-angiogenic agents in the brain, which can potentially improve the treatment of glioblastoma multiforme and prevent toxic effects due to systemic administration., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

Various effective methods are available for perioperative pain control in osteosynthesis surgery, but they are seldom applied intraoperatively. The aim of this study was to evaluate a biodegradable poly([d,l]-lactide-co-glycolide) (PLGA)/lidocaine nanofibrous membrane for perioperative pain control in rib fracture surgery. Scanning electron microscopy showed high porosity of the membrane, and an ex vivo high-performance liquid chromatography study revealed an excellent release profile for both burst and controlled release of lidocaine within 30days. Additionally, the PLGA/lidocaine nanofibrous membrane was applied in an experimental rabbit rib osteotomy model. Implantation of the membrane around the osteotomized rib during osteosynthesis surgery resulted in a significant increase in weight gain, food and water consumption, and daily activity compared to the study group without the membrane. In addition, all osteotomized ribs were united. Thus, application of the PLGA/lidocaine nanofibrous membrane may be effective for sustained relief of pain in oeteosynthesis surgery., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Glioblastoma multiforme (GBM), the most prevalent and malignant form of a primary brain tumour, is resistant to chemotherapy. In this study, we concurrently loaded three chemotherapeutic agents [bis-chloroethylnitrosourea, irinotecan, and cisplatin; BIC] into 50:50 poly[(d,l)-lactide-co-glycolide] (PLGA) nanofibres and an antiangiogenic agent (combretastatin) into 75:25 PLGA nanofibres [BIC and combretastatin (BICC)/PLGA]. The BICC/PLGA nanofibrous membranes were surgically implanted onto the brain surfaces of healthy rats for conducting pharmacodynamic studies and onto C6 glioma-bearing rats for estimating the therapeutic efficacy.The chemotherapeutic agents were rapidly released from the 50:50 PLGA nanofibres after implantation, followed by the release of combretastatin (approximately 2 weeks later) from the 75:25 PLGA nanofibres. All drug concentrations remained higher in brain tissues than in the blood for more than 8 weeks. The experimental results, including attenuated malignancy, retarded tumour growth, and prolonged survival in tumour-bearing rats, demonstrated the efficacy of the BICC/PLGA nanofibrous membranes. Furthermore, the efficacy of BIC/PLGA and BICC/PLGA nanofibrous membranes was compared. The BICC/PLGA nanofibrous membranes more efficiently retarded the tumour growth and attenuated the malignancy of C6 glioma-bearing rats. Moreover, the addition of combretastatin did not significantly change the drug release behaviour of the BIC/PLGA nanofibrous membranes. The present advanced and novel interstitial chemotherapy and targeted treatment provide a potential strategy and regimen for treating GBM.

A composite biodegradable polymeric model was developed to enhance tendon graft healing. This model included a biodegradable polylactide (PLA) bolt as the bone anchor and a poly(D,L-lactide-co-glycolide) (PLGA) nanofibrous membrane embedded with collagen as a biomimic patch to promote tendon-bone interface integration. Degradation rate and compressive strength of the PLA bolt were measured after immersion in a buffer solution for 3 months. In vitro biochemical characteristics and the nanofibrous matrix were assessed using a water contact angle analyzer, pH meter, and tetrazolium reduction assay. In vivo efficacies of PLGA/collagen nanofibers and PLA bolts for tendon-bone healing were investigated on a rabbit bone tunnel model with histological and tendon pullout tests. The PLGA/collagen-blended nanofibrous membrane was a hydrophilic, stable, and biocompatible scaffold. The PLA bolt was durable for tendon-bone anchoring. Histology showed adequate biocompatibility of the PLA bolt on a medial cortex with progressive bone ingrowth and without tissue overreaction. PLGA nanofibers within the bone tunnel also decreased the tunnel enlargement phenomenon and enhanced tendon-bone integration. Composite polymers of the PLA bolt and PLGA/collagen nanofibrous membrane can effectively promote outcomes of tendon reconstruction in a rabbit model. The composite biodegradable polymeric system may be useful in humans for tendon reconstruction.

In this study, we developed biodegradable sheath-core-structured drug-eluting nanofibers for sustainable delivery of antibiotics (vancomycin and ceftazidime) and recombinant human bone morphogenetic protein (rhBMP-2) via electrospinning. To prepare the biodegradable sheath-core nanofibers, we first prepared solutions of poly(d,l)-lactide-co-glycolide, vancomycin, and ceftazidime in 1,1,1,3,3,3-hexafluoro-2-propanol and rhBMP-2 in phosphate-buffered solution. The poly(d,l)-lactide-co-glycolide/antibiotics and rhBMP-2 solutions were then fed into two different capillary tubes controlled by two independent pumps for coaxial electrospinning. The electrospun nanofiber morphology was observed under a scanning electron microscope. We further characterized the in vitro antibiotic release from the nanofibers via high-performance liquid chromatography and that of rhBMP-2 via enzyme-linked immunosorbent assay and alkaline phosphatase activity. We showed that the biodegradable coaxially electrospun nanofibers could release high vancomycin/ceftazidime concentrations (well above the minimum inhibition concentration [MIC]90) and rhBMP-2 for >4 weeks. These experimental results demonstrate that novel biodegradable nanofibers can be constructed with various pharmaceuticals and proteins for long-term drug deliveries.

The aim of this study was to evaluate the efficacy of a biodegradable, lidocaine-embedded, nanofibrous membrane for the sustainable analgesic release onto fragments of a segmental femoral fracture site. Membranes of three different lidocaine concentrations (10%, 30%, and 50%) were produced via an electrospinning technique. In vitro lidocaine release was assessed by high-performance liquid chromatography. A femoral segmental fracture, with intramedullary Kirschner-wire fixation and polycaprolactone stent enveloping the fracture site, was set-up in a rabbit model for in vivo assessment of post-operative recovery of activity. Eighteen rabbits were randomly assigned to three groups (six rabbits per group): group A comprised of rabbits with femoral fractures and underwent fixation; group B comprised of a comparable fracture model to that of group A with the implantation of lidocaine-loaded nanofibers; and group C, the control group, received only anesthesia. The following variables were measured: change in body weight, food and water intake before and after surgery, and total activity count post-surgery. All membranes eluted effective levels of lidocaine for more than 3 weeks post-surgery. Rabbits in group B showed faster recovery of activity post-operatively, compared with those in group A, which confirmed the pain relief efficacy of the lidocaine-embedded nanofibers. Nanofibers with sustainable lidocaine release have adequate efficacy and durability for pain relief in rabbits with segmental long bone fractures., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Biodegradable poly([D,L]-lactide-co-glycolide) (PLGA) nanofibrous membrane embedded with two drug-to-polymer weight ratios, namely 1:3 and 1:6, which comprised PLGA 180 mg, lidocaine 20 mg, vancomycin 20 mg, and ceftazidime 20 mg, and PLGA 360 mg, lidocaine 20 mg, vancomycin 20 mg, and ceftazidime 20 mg, respectively, was produced as an artificial periosteum in the treatment of segmental femoral fractures. The nanofibrous membrane's drug release behavior was assessed in vitro using high-performance liquid chromatography and the disk-diffusion method. A femoral segmental fracture model with intramedullary Kirschner-wire fixation was established for the in vivo rabbit activity study. Twenty-four rabbits were divided into two groups. Twelve rabbits in group A underwent femoral fracture fixation only, and 12 rabbits in group B underwent femoral fracture fixation and were administered the drug-loaded nanofibers. Radiographs obtained at 2, 6, and 12 weeks postoperatively were used to assess the bone unions. The total activity counts in animal behavior cages were also examined to evaluate the clinical performance of the rabbits. After the animals were euthanized, both femoral shafts were harvested and assessed for their torque strengths and toughness. The daily in vitro release curve for lidocaine showed that the nanofibers eluted effective levels of lidocaine for longer than 3 weeks. The bioactivity studies of vancomycin and ceftazidime showed that both antibiotics had effective and sustained bactericidal capacities for over 30 days. The findings from the in vivo animal activity study suggested that the rabbits with the artificial drug-eluting periosteum exhibited statistically increased levels of activity and better clinical performance outcomes compared with the rabbits without the artificial periosteum. In conclusion, this artificial drug-eluting periosteum may eventually be used for the treatment of open fractures.

Glioblastoma multiforme (GBM) is the most common primary malignant brain tumor, and the prognosis of patients afflicted with GBM has been dismal, exhibiting progressive neurologic impairment and imminent death. Even with the most active regimens currently available, chemotherapy achieves only modest improvement in the overall survival. New chemotherapeutic agents and novel approaches to therapy are required for improving clinical outcomes. In this study, we used an electrospinning technique and developed biodegradable poly[(d,l)-lactide-co-glycolide] nanofibrous membranes that facilitated a sustained release of carmustine (or bis-chloroethylnitrosourea, BCNU), irinotecan, and cisplatin. An elution method and a high-performance liquid chromatography assay were employed to characterize the in vitro and in vivo release behaviors of pharmaceuticals from the nanofibrous membranes. The experimental results showed that the biodegradable, nanofibrous membranes released high concentrations of BCNU, irinotecan, and cisplatin for more than 8 weeks in the cerebral cavity of rats. A histological examination revealed progressive atrophy of the brain tissues without inflammatory reactions. Biodegradable drug-eluting nanofibrous membranes may facilitate sustained delivery of various and concurrent chemotherapeutic agents in the cerebral cavity, enhancing the therapeutic efficacy of GBM treatment and preventing toxic effects resulting from the systemic administration of chemotherapeutic agents., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Nanotechnology has gained an increased interest in several different areas of biotechnology including the drug delivery via nanofibers. Self-assembly, phase separation and electrospinning can all be used to successfully generate nanofibers with sizes well within the range of those of the fibers present in the native extracellular matrix (50-500 nm). In this article, the authors introduced the most popular applications of nanofibers related to the delivery of antimicrobial agents for infectious diseases. To date, only a few in-vivo studies are available at present to demonstrate its clinical potential; most of the studies are of exploratory nature and rely mostly on in-vitro experiments. Therefore, further advancement in the production and clinical performance of drug-loaded nanofibrous matrices seems necessary.

Background: Inadequate intrapleural drug concentrations caused by poor penetration of systemic antibiotics into the pleural cavity is a major cause of treatment failure in empyema. Herein, we describe a novel antibiotic-eluting pigtail catheter coated with electrospun nanofibers used for the sustained release of bactericidal concentrations of penicillin in the pleural space., Methods: Electrospun nanofibers prepared using polylactide-polyglycolide copolymer and penicillin G sodium dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol were used to coat the surface of an Fr6 pigtail catheter. The in vitro patterns of drug release were tested by placing the catheter in phosphate-buffered saline. In vivo studies were performed using rabbits treated with penicillin either intrapleurally (Group 1, 20 mg delivered through the catheter) or systemically (Group 2, intramuscular injection, 10 mg/kg). Penicillin concentrations in the serum and pleural fluid were then measured and compared., Results: In vitro studies revealed a burst release of penicillin (10% of the total dose) occurring in the first 24 hours, followed by a sustained release in the subsequent 30 days. Intrapleural drug levels were significantly higher in Group 1 than in Group 2 (P<0.001). In the former, penicillin concentrations remained above the minimum inhibitory concentration breakpoint throughout the entire study period. In contrast, serum penicillin levels were significantly higher in Group 2 than in Group 1 (P<0.001). Notably, all Group 2 rabbits showed signs of systemic toxicity (paralytic ileus and weight loss)., Conclusion: We conclude that our antibiotic-eluting catheter may serve as a novel therapeutic option to treat empyema.

This work developed nanofibrous drug-loaded collagen/poly-D-L-lactide-glycolide (PLGA) scaffold membranes that provided the sustained release of glucophage for the wounds associated with diabetes. PLGA, glucophage, and collagen were firstly dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol and were spun into nanofibrous membranes by electrospinning. High-performance liquid chromatography assay was used to characterize the in vivo and in vitro release rates of the pharmaceuticals from the membranes. High concentrations of glucophage were released for over three weeks from the nanofibrous membranes. The nanofibrous glucophage-loaded collagen/PLGA membranes were more hydrophilic than collagen/PLGA membranes and exhibited a greater water-containing capacity. The glucophage-loaded collagen/PLGA membranes markedly promoted the healing of diabetic wounds. Moreover, the collagen content of diabetic rats using drug-eluting membranes was higher than that of the control rats, because of the down-regulation of matrix metalloproteinase 9. The experimental results herein suggest that the nanofibrous glucophage-loaded collagen/PLGA membranes had effect for increasing collagen content in treating diabetic wounds and very effective promoters of the healing of such wounds in the early stages., (Copyright © 2014 Elsevier Inc. All rights reserved.)

This study describes novel biodegradable, drug-eluting nanofiber-loaded vascular prosthetic grafts that provide local and sustained delivery of vancomycin to surrounding tissues. Biodegradable nanofibers were prepared by first dissolving poly(D,L)-lactide-co-glycolide and vancomycin in 1,1,1,3,3,3-hexafluoro-2-propanol. The solution was then electrospun into nanofibers onto the surface of vascular prostheses. The in vitro release rates of the pharmaceutical from the nanofiber-loaded prostheses was characterized using an elution method and a high-performance liquid chromatography assay. Experimental results indicated that the drug-eluting prosthetic grafts released high concentrations of vancomycin in vitro (well above the minimum inhibitory concentration) for more than 30 days. In addition, the in vivo release behavior of the drug-eluting grafts implanted in the subcutaneous pocket of rabbits was also documented. The drug-eluting grafts developed in this work have potential applications in assisting the treatment of vascular prosthesis infection and resisting reinfection when an infected graft is to be exchanged.

The incidence of postoperative central nervous system infection (PCNSI) is higher than 5%-7%. Successful management of PCNSI requires a combined therapy of surgical debridement and long-term antibiotic treatment. In this study, Duraform soaked in a prepared bacterial solution was placed on the brain surface of rats to induce PCNSI. Virgin poly[(d,l)-lactide-co-glycolide] (PLGA) nanofibrous membranes (vehicle-control group) and vancomycin-eluting PLGA membranes (vancomycin-nanofibres group) were implanted. The wound conditions were observed and serial brain MRI and pathology examinations were performed regularly. PCNSI was consistently induced in a single, simple step. In the vehicle-control group, most rats died within 1 week, and the survival rate was low (odds ratio = 0.0357, 95% confidence interval = 0.0057-0.2254). The wounds and affected cerebral tissues necrosed with purulence and increased in mass from the resulting PCNSI volumes. Initially, the mean PCNSI volumes showed no significant difference between the two groups. The PCNSI volume in the rats in the vancomycin-nanofibres group significantly decreased (P < 0.01), and the wound appearance was excellent. Pathologic examinations revealed that the necrosis and leukocyte infiltration area decreased considerably. The experimental results suggest that vancomycin-eluting PLGA nanofibres are favourable candidates for treating PCNSI after surgical debridement.

Nanofibers are extremely advantageous for drug delivery because of their high surface area-to-volume ratios, high porosities and 3D open porous structures. Local delivery of analgesics by using nanofibers allows site-specificity and requires a lower overall drug dosage with lower adverse side effects. Different analgesics have been loaded onto various nanofibers, including those that are natural, synthetic and copolymer, for various medical applications. Analgesics can also be singly or coaxially loaded onto nanofibers to enhance clinical applications. In particular, analgesic-eluting nanofibers provide additional benefits to preventing wound adhesion and scar formation. This paper reviews current research and breakthrough discoveries on the innovative application of analgesic-loaded nanofibers that will alter the clinical therapy of pain.

We developed biodegradable drug-eluting nanofiber-enveloped implants that provided sustained release of vancomycin and ceftazidime. To prepare the biodegradable nanofibrous membranes, poly(D,L)-lactide-co-glycolide and the antibiotics were first dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol. They were electrospun into biodegradable drug-eluting membranes, which were then enveloped on the surface of stainless plates. An elution method and a high-performance liquid chromatography assay were employed to characterize the in vivo and in vitro release rates of the antibiotics from the nanofiber-enveloped plates. The results showed that the biodegradable nanofiber-enveloped plates released high concentrations of vancomycin and ceftazidime (well above the minimum inhibitory concentration) for more than 3 and 8 weeks in vitro and in vivo, respectively. A bacterial inhibition test was carried out to determine the relative activity of the released antibiotics. The bioactivity ranged from 25% to 100%. In addition, the serum creatinine level remained within the normal range, suggesting that the high vancomycin concentration did not affect renal function. By adopting the electrospinning technique, we will be able to manufacture biodegradable drug-eluting implants for the long-term drug delivery of different antibiotics.

Incomplete endothelialization and neointimal hyperplasia of injured arteries can cause acute and late stent thromboses. This work develops hybrid stent/biodegradable nanofibers for the local and sustained delivery of rosuvastatin to denuded artery walls. Biodegradable nanofibers were firstly prepared by dissolving poly(D,L)-lactide-co-glycolide and rosuvastatin in 1,1,1,3,3,3-hexafluoro-2-propanol. The solution was then electrospun into nanofibrous tubes, which were mounted onto commercially available bare-metal stents. The in vitro release rates of the pharmaceuticals from the nanofibers were determined using an elution method and a high-performance liquid chromatography assay. The experimental results thus obtained suggest that the biodegradable nanofibers released high concentrations of rosuvastatin for four weeks. The effectiveness of the local delivery of rosuvastatin in reducing platelets was studied. The tissue inflammatory reaction caused by the hybrid stents that were used to treat diseased arteries was also documented. The proposed hybrid stent/biodegradable rosuvastatin-loaded nanofibers contributed substantially to the local and sustainable delivery of a high concentration of drugs to promote re-endothelialization, improve endothelial function, reduce inflammatory reaction, and inhibit neointimal formation of the injured artery. The results of this work provide insight into how patients with a high risk of stent restenosis should be treated for accelerating re-endothelialization and inhibiting neointimal hyperplasia., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

In this study we developed polypyrrole embedded electrospun nanofibrous polyethersulfone nanofibrous membranes for the removal of silver ions. Polypyrrole and polyethersulfone dissolved in N-methyl-2-pyrrolidone (NMP) were electrospun into nanofibrous membranes via an electrospinning process. The morphology of as-spun polypyrrole/polyethersulfone nanofibers was examined by scanning electron microscopy. The average diameter of electrospun nanofibers ranged from 410 nm to 540 nm. The adsorption capability of nanofibrous polypyrrole/polyethersulfone membranes was measured and compared with that of bulk polypyrrole. The influence of various process conditions on adsorption efficiency was also examined. The experimental results suggested that the electrospun nanofibrous membranes exhibited good silver ion uptake capabilities. The metal uptake of nanofibrous membranes increased with the initial metal ion concentrations and the pH value, while decreased with the temperature and the filtering rate of the solutions. Furthermore, the electrospun membrane could be reused after the recovery process., (Copyright © 2014 Elsevier Inc. All rights reserved.)

This work developed biodegradable nanofibrous drug-eluting membranes that provided sustained release of metformin for repairing wounds associated with diabetes. To prepare the biodegradable membranes, poly-d-l-lactide-glycolide (PLGA) and metformin were first dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and were spun into nanofibrous membranes by electrospinning. An elution method and an HPLC assay were utilized to characterize the in vivo and in vitro release rates of the pharmaceuticals from the membranes. The biodegradable nanofibrous membranes released high concentrations of metformin for more than three weeks. Moreover, nanofibrous metformin-eluting PLGA membranes were more hydrophilic and had a greater water-containing capacity than virgin PLGA fibers. The membranes also improved wound healing and re-epithelialization in diabetic rats relative to the control. The experimental results in this work suggest that nanofibrous metformin-eluting membranes were functionally active in the treatment of diabetic wounds and very effective as accelerators in the early stage of healing of such wounds.

Incomplete endothelialization, blood cell adhesion to vascular stents, and inflammation of arteries can result in acute stent thromboses. The systemic administration of acetylsalicylic acid decreases endothelial dysfunction, potentially reducing thrombus, enhancing vasodilatation, and inhibiting the progression of atherosclerosis; but, this is weakened by upper gastrointestinal bleeding. This study proposes a hybrid stent with biodegradable nanofibers, for the local, sustained delivery of acetylsalicylic acid to injured artery walls. Biodegradable nanofibers are prepared by first dissolving poly(D,L)-lactide-co-glycolide and acetylsalicylic acid in 1,1,1,3,3,3-hexafluoro-2-propanol. The solution is then electrospun into nanofibrous tubes, which are then mounted onto commercially available bare-metal stents. In vitro release rates of pharmaceuticals from nanofibers are characterized using an elution method, and a highperformance liquid chromatography assay. The experimental results suggest that biodegradable nanofibers release high concentrations of acetylsalicylic acid for three weeks. The in vivo efficacy of local delivery of acetylsalicylic acid in reducing platelet and monocyte adhesion, and the minimum tissue inflammatory reaction caused by the hybrid stents in treating denuded rabbit arteries, are documented. The proposed hybrid stent, with biodegradable acetylsalicylic acid-loaded nanofibers, substantially contributed to local, sustained delivery of drugs to promote re-endothelialization and reduce thrombogenicity in the injured artery. The stents may have potential applications in the local delivery of cardiovascular drugs. Furthermore, the use of hybrid stents with acetylsalicylic acid-loaded nanofibers that have high drug loadings may provide insight into the treatment of patients with high risk of acute stent thromboses.

Aim: We developed biodegradable, lidocaine-embedded poly([D,L]-lactide-co-glycolide) nanofibers for epidural analgesia to reduce the severe pain in rats after laminectomies., Materials & Methods: Nanofibers were prepared by an electrospinning process and were introduced into the epidural space of rats after laminectomy. The lidocaine concentration, postoperative bodyweight change and amount of food/water intake were monitored to evaluate the analgesic effectiveness of the drug-eluting nanofibers., Results: It was demonstrated that the nanofibers provided a sustained release of lidocaine for more than 2 weeks, and the local pharmaceutical concentration was much higher than the concentration in plasma. Rats that received laminectomies without nanofibers exhibited the greatest bodyweight reduction. The food/water intake and activity performance were significantly higher in rats receiving laminectomies with nanofibers than in rats without nanofibers., Conclusion: The results of this study suggest that the lidocaine-loaded nanofibers can provide an easy, practical and safe means of achieving effective postlaminectomy analgesia.

Successful treatment of a brain infection requires aspiration of the pus or excision of the abscess, followed by long-term (usually 4-8 weeks) parenteral antibiotic treatment. Local antibiotic delivery using biodegradable drug-impregnated carriers is effective in treating postoperative infections, thereby reducing the toxicity associated with parenteral antibiotic treatment and the expense involved with long-term hospitalization. We have developed vancomycin-loaded, biodegradable poly[lactic-co-glycol acid] nanofibrous membranes for the sustainable delivery of vancomycin to the brain tissue of rats by using the electrospinning technique. A high-performance liquid chromatography assay was employed to characterize the in vitro and in vivo release behaviors of pharmaceuticals from the membranes. The experimental results suggested that the biodegradable nanofibers can release high concentrations of vancomycin for more than 8 weeks in the cerebral cavity of rats. Furthermore, the membranes can cover the wall of the cavity after the removal of abscess more completely and achieve better drug delivery without inducing adverse mass effects in the brain. Histological examination also showed no inflammation reaction of the brain tissues. By adopting the biodegradable, nanofibrous drug-eluting membranes, we will be able to achieve long-term deliveries of various antibiotics in the cerebral cavity to enhance the therapeutic efficacy of cerebral infections.

This study investigated the in vitro release of vancomycin, gentamicin, and lidocaine from novel electrospun sandwich-structured polylactide-polyglycolide (PLGA)/collagen nanofibrous membranes. For the electrospinning of biodegradable membranes, PLGA/collagen and PLGA/vancomycin/gentamicin/lidocaine were separately dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). They were then electrospun into sandwich structured membranes, with PLGA/collagen for the surface layers and PLGA/drugs for the core layer. After electrospinning, an elution method and HPLC assay were employed to characterize the in vitro release rates of the pharmaceutics over a 30-day period. The experiment showed that biodegradable nanofibrous membranes released high concentrations of vancomycin and gentamicin (well above the minimum inhibition concentration) for 4 and 3 weeks, respectively, and lidocaine for 2 weeks. A bacterial inhibition test was carried out to determine the relative activity of the released antibiotics. The bioactivity of vancomycin and gentamicin ranged from 30% to 100% and 37% to 100%, respectively. In addition, results indicated that the nanofibrous membranes were functionally active in responses in human fibroblasts. By adopting the electrospinning technique, we will be able to manufacture biodegradable biomimetic nanofibrous extracellular membranes for long-term drug delivery of various pharmaceuticals., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Background: The purpose of this study was to develop novel sandwich-structured nanofibrous membranes to provide sustained-release delivery of vancomycin, gentamicin, and lidocaine for repair of infected wounds., Methods: To prepare the biodegradable membranes, poly(D, L)-lactide-co-glycolide (PLGA), collagen, and various pharmaceuticals, including vancomycin, gentamicin, and lidocaine, were first dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol. They were electrospun into sandwich-structured membranes with PLGA/collagen as the surface layers and PLGA/drugs as the core. An elution method and a high-pressure liquid chromatography assay were used to characterize in vivo and in vitro drug release from the membranes. In addition, repair of infected wounds in rats was studied. Histological examination of epithelialization and granulation at the wound site was also performed., Results: The biodegradable nanofibrous membranes released large amounts of vancomycin and gentamicin (well above the minimum inhibition concentration) and lidocaine in vivo for more than 3 weeks. A bacterial inhibition test was carried out to determine the relative activity of the antibiotics released. The bioactivity ranged from 40% to 100%. The nanofibrous membranes were functionally active in treating infected wounds, and were very effective as accelerators in early-stage wound healing., Conclusion: Using the electrospinning technique, we will be able to manufacture biodegradable, biomimetic, nanofibrous, extracellular membranes for long-term delivery of various drugs.

The purpose of this report was to develop novel biodegradable occlusion devices for closure of atrial septal defects (ASD). To manufacture the biodegradable occluders, polycaprolactone (PCL) components were first fabricated by a lab-scale micro-injection molding machine. They were then assembled and hot-spot welded into double umbrella-like devices of 50 mm in diameter. A special mechanism at the axis of the occluder was designed to self-lock the occluder after the two umbrellas were expanded. Furthermore, a nanofibrous matrix of poly-D-L-lactide-glycolide (PLGA)/type I collagen blend was produced via electrospinning to develop biodegradable and biomimetic anti-shunt membranes for the occluders. Characterization of the biodegradable PCL occluders was carried out. PCL occluders exhibited mechanical properties comparable to that of commercially available Amplatzer occluders. The sealing capability of biodegradable occluders was found superior to that of Amplatzer occluders. In addition, the cell attachment and spreading of endothelial cells seeded on the PLGA/collagen nanofibrous matrix and the interaction between cells and PLGA/collagen nanofibers were studied. The nanofibrous membranes made of PLGA/collagen were very effective in promoting cell proliferation during culture.

Pelvic prolapse stands as a substantial medical concern, notably impacting a significant segment of the population, predominantly women. This condition, characterized by the descent of pelvic organs, such as the uterus, bladder, or rectum, from their normal positions, can lead to a range of distressing symptoms, including pelvic pressure, urinary incontinence, and discomfort during intercourse. Clinical challenges abound in the treatment landscape of pelvic prolapse, stemming from its multifactorial etiology and the diverse array of symptoms experienced by affected individuals. Current treatment options, while offering relief to some extent, often fall short in addressing the full spectrum of symptoms and may pose risks of complications or recurrence. Consequently, there exists a palpable need for innovative solutions that can provide more effective, durable, and patient-tailored interventions for pelvic prolapse. We manufactured an integrated polycaprolactone (PCL) mesh, reinforced with nano-hydroxyapatite (nHA), along with drug-eluting poly(lactic-co-glycolic acid) (PLGA) nanofibers for a prolapse scaffold. This aims to offer a promising avenue for enhanced treatment outcomes and improved quality of life for individuals grappling with pelvic prolapse. Solution extrusion additive manufacturing and electrospinning methods were utilized to prepare the nHA filled PCL mesh and drug-incorporated PLGA nanofibers, respectively. The pharmaceuticals employed included metronidazole, ketorolac, bleomycin, and estrone. Properties of fabricated resorbable scaffolds were assessed. The in vitro release characteristics of various pharmaceuticals from the meshes/nanofibers were evaluated. Furthermore, the in vivo drug elution pattern was also estimated on a rat model. The empirical data show that nHA reinforced PCL mesh exhibited superior mechanical strength to virgin PCL mesh. Electrospun resorbable nanofibers possessed diameters ranging from 85 to 540 nm, and released effective metronidazole, ketorolac, bleomycin, and estradiol, respectively, for 9, 30, 3, and over 30 days in vitro. Further, the mesh/nanofiber scaffolds also liberated high drug levels at the target site for more than 28 days in vivo, while the drug concentrations in blood remained low. This discovery suggests that resorbable scaffold can serve as a viable option for treating female pelvic organ prolapse. [ABSTRACT FROM AUTHOR]

Achilles tendon rupture is a severe injury, and its optimal therapy remains controversial. Tissue engineering scaffolds play a significant role in tendon healing and tissue regeneration. In this study, we developed tri-layered doxycycline/collagen/bupivacaine (DCB)-composite nanofibrous scaffolds to repair injured Achilles tendons. Doxycycline, collagen, and bupivacaine were integrated into poly(lactic-co-glycolic acid) (PLGA) nanofibrous membranes, layer by layer, using an electrospinning technique as healing promoters, a 3D scaffold, and painkillers, respectively. After spinning, the properties of the nanofibrous scaffolds were characterized. In vitro drug discharge behavior was also evaluated. Furthermore, the effectiveness of the DCB–PLGA-composite nanofibers in repairing ruptured Achilles tendons was investigated in an animal tendon model with histological analyses. The experimental results show that, compared to the pristine PLGA nanofibers, the biomolecule-loaded nanofibers exhibited smaller fiber size distribution and an enhanced hydrophilicity. The DCB-composite nanofibers provided a sustained release of doxycycline and bupivacaine for over 28 days in vivo. Additionally, Achilles tendons repaired using DCB-composite nanofibers exhibited a significantly higher maximum load-to-failure than normal tendons, suggesting that the biomolecule-incorporated nanofibers are promising scaffolds for repairing Achilles tendons. [ABSTRACT FROM AUTHOR]

The article titled "Electrospun Nanofibrous Composite Membranes for Long-Term Release of Celecoxib for Achilles Tendon Reconstruction Following Injury" discusses the development of a new implantable combination of nanofibers for Achilles tendon reconstruction. The nanofibers, called celecoxib-collagen-bupivacainepoly(lactic-co-glycolic acid) (CCBP), show improved therapeutic application and higher load-to-failure values compared to healthy tendons and nanofibers with doxycycline. The authors suggest that CCBP is a promising scaffold for repairing ruptured Achilles tendons and is superior to existing materials. [Extracted from the article]

The aim of this study was to develop a biodegradable three-dimensional-printed polylactide (PLA) cage for promoting bony fixation and an antibiotics-embedded poly( d,l )-lactide-co-glycolide (PLGA) nanofibrous membrane for infectious prophylaxis during treating the comminuted metaphyseal fracture in a rabbit femoral model. The in vitro studies included measuring the mechanical properties of the 3D printed cage and determining release activities of vancomycin and ceftazidime from the nanofibers. The in vivo study included comparisons of rabbits of the femoral metaphyseal comminuted fracture treated with or without the combined biodegradable polymers. The results showed that vancomycin and ceftazidime were sustainably detected above the effective levels in the local tissue fluid around the fracture site for 3 weeks. The animal studies showed that rabbits with the 3D cage implantation possessed better cortical integrity, leg length ratio, and maximal bending strengths. The study results indicate that these combined polymers may promote fracture fixation during treating the rabbit femoral metaphyseal comminuted fracture. [ABSTRACT FROM AUTHOR]

Stent implantation impairs local endothelial function and may be associated with subsequent adverse cardiovascular events. Telmisartan, an angiotensin II receptor blocker that has unique peroxisome proliferator-activated-receptor-gamma-mediated effects on cardiovascular disease, has been shown to enhance endothelial function and limit neointimal hyperplasia. This study utilized hybrid biodegradable/stent nanofibers to facilitate sustained and local delivery of telmisartan to injured arterial vessels. Telmisartan and poly(d,l)-lactide-co-glycolide (PLGA) (75:25) were dissolved in hexafluoroisopropyl alcohol and electrospun into biodegradable nanofibrous tubes which were coated onto metal stents. By releasing 20% of the loaded telmisartan in 30 days, these hybrid biodegradable/stent telmisartan-loaded nanofibers increased the migration of endothelial progenitor cells in vitro, promoted endothelialization, and reduced intimal hyperplasia. As such, this work provides insights into the use of PLGA nanofibers for treating patients with an increased risk of stent restenosis. [ABSTRACT FROM AUTHOR]