Search

The Clostridium genus harbors compelling organisms for biotechnological production processes; while acetogenic clostridia can fix C1-compounds to produce acetate and ethanol, solventogenic clostridia can utilize a wide range of carbon sources to produce commercially valuable carboxylic acids, alcohols, and ketones by fermentation. Despite their potential, the conversion by these bacteria of carbohydrates or C1 compounds to alcohols is not cost-effective enough to result in economically viable processes. Engineering solventogenic clostridia by impairing sporulation is one of the investigated approaches to improve solvent productivity. Sporulation is a cell differentiation process triggered in bacteria in response to exposure to environmental stressors. The generated spores are metabolically inactive but resistant to harsh conditions (UV, chemicals, heat, oxygen). In Firmicutes, sporulation has been mainly studied in bacilli and pathogenic clostridia, and our knowledge of sporulation in solvent-producing or acetogenic clostridia is limited. Still, sporulation is an integral part of the cellular physiology of clostridia; thus, understanding the regulation of sporulation and its connection to solvent production may give clues to improve the performance of solventogenic clostridia. This review aims to provide an overview of the triggers, characteristics, and regulatory mechanism of sporulation in solventogenic clostridia. Those are further compared to the current knowledge on sporulation in the industrially relevant acetogenic clostridia. Finally, the potential applications of spores for process improvement are discussed.Key Points• The regulatory network governing sporulation initiation varies in solventogenic clostridia.• Media composition and cell density are the main triggers of sporulation.• Spores can be used to improve the fermentation process.

Metabolic engineering for increased isoprenoid production often benefits from the simultaneous expression of the two naturally available isoprenoid metabolic routes, namely the 2-methyl-D-erythritol 4-phosphate (MEP) pathway and the mevalonate (MVA) pathway. Quantification of the contribution of these pathways to the overall isoprenoid production can help to obtain a better understanding of the metabolism within a microbial cell factory. Such type of investigation can benefit from 13C metabolic flux ratio studies. Here, we designed a method based on parallel labeling experiments (PLEs), using [1-13C]- and [4-13C]glucose as tracers to quantify the metabolic flux ratios in the glycolytic and isoprenoid pathways. By just analyzing a reporter isoprenoid molecule and employing only four equations, we could describe the metabolism involved from substrate catabolism to product formation. These equations infer 13C atom incorporation into the universal isoprenoid building blocks, isopentenyl-pyrophosphate (IPP) and dimethylallyl-pyrophosphate (DMAPP). Therefore, this renders the method applicable to the study of any of isoprenoid of interest. As proof of principle, we applied it to study amorpha-4,11-diene biosynthesis in the bacterium Rhodobacter sphaeroides. We confirmed that in this species the Entner-Doudoroff pathway is the major pathway for glucose catabolism, while the Embden-Meyerhof-Parnas pathway contributes to a lesser extent. Additionally, we demonstrated that co-expression of the MEP and MVA pathways caused a mutual enhancement of their metabolic flux capacity. Surprisingly, we also observed that the isoprenoid flux ratio remains constant under exponential growth conditions, independently from the expression level of the MVA pathway. Apart from proposing and applying a tool for studying isoprenoid biosynthesis within a microbial cell factory, our work reveals important insights from the co-expression of MEP and MVA pathways, including the existence of a yet unclear interaction between them.

The discovery of thermophilic and hyperthermophilic microorganisms, thriving at environmental temperatures near or above 100 °C, has revolutionized our ideas about the upper temperature limit at which life can exist. The characterization of (hyper)thermostable proteins has broadened our understanding and presented new opportunities for solving one of the most challenging problems in biophysics: how are structural stability and biological function maintained at high temperatures where “normal” proteins undergo dramatic structural changes? In our laboratory, we have purified and studied many thermostable and hyperthermostable proteins in an attempt to determine the molecular basis of heat stability. Here, we present methods to express such proteins and enzymes in E. coli and provide a general protocol for overproduction and purification. The ability to produce enzymes that retain their stability and activity at elevated temperatures creates exciting opportunities for a wide range of biocatalytic applications.

At the junction between the glycolysis and the tricarboxylic acid cycle—as well as various other metabolic pathways—lies the phosphoenolpyruvate (PEP)-pyruvate-oxaloacetate node (PPO-node). These three metabolites form the core of a network involving at least eleven different types of enzymes, each with numerous subtypes. Obviously, no single organism maintains each of these eleven enzymes; instead, different organisms possess different subsets in their PPO-node, which results in a remarkable degree of variation, despite connecting such deeply conserved metabolic pathways as the glycolysis and the tricarboxylic acid cycle. The PPO-node enzymes play a crucial role in cellular energetics, with most of them involved in (de)phosphorylation of nucleotide phosphates, while those responsible for malate conversion are important redox enzymes. Variations in PPO-node therefore reflect the different energetic niches that organisms can occupy. In this review, we give an overview of the biochemistry of these eleven PPO-node enzymes. We attempt to highlight the variation that exists, both in PPO-node compositions, as well as in the roles that the enzymes can have within those different settings, through various recent discoveries in both bacteria and archaea that reveal deviations from canonical functions., Three metabolites, phosphoenolpyruvate, pyruvate and oxaloacetate together form the PPO-node, and are interconnected by a subset of 11 different enzymes; the current knowledge regarding these enzymes at the heart of metabolism is presented.

One of the main differences between bacteria and archaea concerns their membrane composition. Whereas bacterial membranes are made up of glycerol-3-phosphate ester lipids, archaeal membranes are composed of glycerol-1-phosphate ether lipids. Here, we report the construction of a stable hybrid heterochiral membrane through lipid engineering of the bacterium Escherichia coli. By boosting isoprenoid biosynthesis and heterologous expression of archaeal ether lipid biosynthesis genes, we obtained a viable E. coli strain of which the membranes contain archaeal lipids with the expected stereochemistry. It has been found that the archaeal lipid biosynthesis enzymes are relatively promiscuous with respect to their glycerol phosphate backbone and that E. coli has the unexpected potential to generate glycerol-1-phosphate. The unprecedented level of 20–30% archaeal lipids in a bacterial cell has allowed for analyzing the effect on the mixed-membrane cell’s phenotype. Interestingly, growth rates are unchanged, whereas the robustness of cells with a hybrid heterochiral membrane appeared slightly increased. The implications of these findings for evolutionary scenarios are discussed.

Summary The use of bioreporters in high‐throughput screening for small molecules is generally laborious and/or expensive. The technology can be simplified by coupling the generation of a desired compound to cell survival, causing only positive cells to stay in the pool of generated variants. Here, a dual selection/screening system was developed for the in vivo detection of novel biocatalysts. The sensor part of the system is based on the transcriptional regulator AraC, which controls expression of both a selection reporter (LeuB or KmR; enabling growth) for rapid reduction of the initially large library size and a screening reporter (LuxCDABE; causing bioluminescence) for further quantification of the positive variants. Of four developed systems, the best system was the medium copy system with KmR as selection reporter. As a proof of principle, the system was tested for the selection of cells expressing an l‐arabinose isomerase derived from mesophilic Escherichia coli or thermophilic Geobacillus thermodenitrificans. A more than a millionfold enrichment of cells with l‐arabinose isomerase activity was demonstrated by selection and exclusion of false positives by screening. This dual selection/screening system is an important step towards an improved detection method for small molecules, and thereby for finding novel biocatalysts.

The cupin-type phosphoglucose isomerase (PfPGI) from the hyperthermophilic archaeon Pyrococcus furiosus catalyzes the reversible isomerization of glucose-6-phosphate to fructose-6-phosphate. We investigated PfPGI using protein-engineering bioinformatics tools to select functionally-important residues based on correlated mutation analyses. A pair of amino acids in the periphery of PfPGI was found to be the dominant co-evolving mutation. The position of these selected residues was found to be non-obvious to conventional protein engineering methods. We designed a small smart library of variants by substituting the co-evolved pair and screened their biochemical activity, which revealed their functional relevance. Four mutants were further selected from the library for purification, measurement of their specific activity, crystal structure determination, and metal cofactor coordination analysis. Though the mutant structures and metal cofactor coordination were strikingly similar, variations in their activity correlated with their fine-tuned dynamics and solvent access regulation. Alternative, small smart libraries for enzyme optimization are suggested by our approach, which is able to identify non-obvious yet beneficial mutations.

Eat1 is a recently discovered alcohol acetyltransferase responsible for bulk ethyl acetate production in yeasts such as Wickerhamomyces anomalus and Kluyveromyces lactis. These yeasts have the potential to become efficient bio-based ethyl acetate producers. However, some fundamental features of Eat1 are still not understood, which hampers the rational engineering of efficient production strains. The cellular location of Eat1 in yeast is one of these features. To reveal its location, Eat1 was fused with yeast-enhanced green fluorescent protein (yEGFP) to allow intracellular tracking. Despite the current assumption that bulk ethyl acetate production occurs in the yeast cytosol, most of Eat1 localized to the mitochondria of Kluyveromyces lactis CBS 2359 Δku80. We then compared five bulk ethyl acetate-producing yeasts in iron-limited chemostats with glucose as the carbon source. All yeasts produced ethyl acetate under these conditions. This strongly suggests that the mechanism and location of bulk ethyl acetate synthesis are similar in these yeast strains. Furthermore, an in silico analysis showed that Eat1 proteins from various yeasts were mostly predicted as mitochondrial. Altogether, it is concluded that Eat1-catalyzed ethyl acetate production occurs in yeast mitochondria. This study has added new insights into bulk ethyl acetate synthesis in yeast, which is relevant for developing efficient production strains. IMPORTANCE Ethyl acetate is a common bulk chemical that is currently produced from petrochemical sources. Several Eat1-containing yeast strains naturally produce large amounts of ethyl acetate and are potential cell factories for the production of bio-based ethyl acetate. Rational design of the underlying metabolic pathways may result in improved production strains, but it requires fundamental knowledge on the function of Eat1. A key feature is the location of Eat1 in the yeast cell. The precursors for ethyl acetate synthesis can be produced in multiple cellular compartments through different metabolic pathways. The location of Eat1 determines the relevance of each pathway, which will provide future targets for the metabolic engineering of bulk ethyl acetate production in yeast.

The euryarchaeon Thermococcus kodakarensis is a well-characterized anaerobic hyperthermophilic heterotroph and due to the availability of genetic engineering systems it has become one of the model organisms for studying Archaea. Despite this prominent role among the Euryarchaeota, no data about the ploidy level of this species is available. While polyploidy has been shown to exist in various Euryarchaeota, especially Halobacteria, the chromosome copy number of species belonging to one of the major orders within that phylum, i.e., the Thermococcales (including Thermococcus spp. and Pyrococcus spp.), has never been determined. This prompted us to investigate the chromosome copy number of T. kodakarensis. In this study, we demonstrate that T. kodakarensis is polyploid with a chromosome copy number that varies between 7 and 19 copies, depending on the growth phase. An apparent correlation between the presence of histones and polyploidy in Archaea is observed. Electronic supplementary material The online version of this article (doi:10.1007/s00792-015-0750-5) contains supplementary material, which is available to authorized users.

An extensive list of putative cellulosomal enzymes from C. thermocellum is now available in the public databanks, however, most of these remain unvalidated with regard to their activity and expression control mechanisms. This is particularly true of those enzymes putatively involved in hemicellulose deconstruction. Our research group has been working on mapping and characterization of glycoside hydrolases produced by C. thermocellum B8, that are critical for lignocellulosic biomass deconstruction. One of the identified genes expressed during growth on sugar cane bagasse and straw is axb8, which encodes a putative cellulosomal GH43_29 α-arabinofuranosidase (EC 3.2.1.55) that has not previously been characterized at the molecular or kinetic levels. The AxB8 predicted amino acid sequence presented GH43 and dockerin domains, as well as a family 6 carbohydrate-binding module (CBM6). Also, it is a close homologue of Firmicutes putatives α-arabinofuranosidases, including cellulosomal proteins. Multiple alignment analysis grouped AxB8 in a cluster with four uncharacterized putative GH43_29 subfamily enzymes, all containing dockerin type I domain and CBM6 modules. Purified heterologously expressed AxB8 showed activity against the synthetic substrates pNPX (p-nytrophenyl-β-D-xylopyranoside) and pNPA (p-nytrophenyl-α-L-arabinofuranoside), as well as against the natural substrate wheat arabinoxylan (WAX), with maximal activity at 50 °C and pH between 5.0 and 6.0. The WAX degradation profile by AxB8 is different from those typically seen for α-arabinofuranosidases, presenting mainly xylose as a hydrolysis product, instead of arabinose. In addition, unlike other GH43_29 enzymes already characterized, AxB8 did not present activity against arabinan. Kinetic parameters using pNPA as a substrate were Km of 23 ± 3 mM and kcat of 104 ± 7 s−1. Despite its activity against pNPX, we did not observe AxB8 saturation with this substrate. AxB8 is the first member in its clade to be characterized regarding kinetic parameters, and together with its closest homologues could represent a large group of glycoside hydrolases with particular properties within the GH43_29 subfamily.

Pyrococcus furiosus has come of age. In 1986 the first publication on a remarkable microorganism, Pyrococcus furiosus, appeared. Now, 30 years later it is still "the fast and the furious".

Increased hydrogen (H2) levels are known to inhibit H2 formation in Caldicellulosiruptor saccharolyticus. To investigate this organism's strategy for dealing with elevated H2 levels the effect of the hydrogen partial pressure ( P H 2 ) on fermentation performance was studied by growing cultures under high and low P H 2 in a glucose limited chemostat setup. Transcriptome analysis revealed the upregulation of genes involved in the disposal of reducing equivalents under high P H 2 , like lactate dehydrogenase and alcohol dehydrogenase as well as the NADH-dependent and ferredoxin-dependent hydrogenases. These findings are in line with the observed shift in fermentation profiles from acetate production to the production of acetate, lactate and ethanol under high P H 2 . Moreover, differential transcription was observed for genes involved in carbon metabolism, fatty acid biosynthesis and several transport systems. In addition, presented transcription data provide evidence for the involvement of the redox sensing Rex protein in gene regulation under high P H 2 cultivation conditions.

Caldicellulosiruptor saccharolyticus is one of the most thermophilic cellulolytic organisms known to date. This Gram-positive anaerobic bacterium ferments a broad spectrum of mono-, di- and polysaccharides to mainly acetate, CO2 and hydrogen. With hydrogen yields approaching the theoretical limit for dark fermentation of 4 mol hydrogen per mol hexose, this organism has proven itself to be an excellent candidate for biological hydrogen production. This review provides an overview of the research on C. saccharolyticus with respect to the hydrolytic capability, sugar metabolism, hydrogen formation, mechanisms involved in hydrogen inhibition, and the regulation of the redox and carbon metabolism. Analysis of currently available fermentation data reveal decreased hydrogen yields under non-ideal cultivation conditions, which are mainly associated with the accumulation of hydrogen in the liquid phase. Thermodynamic considerations concerning the reactions involved in hydrogen formation are discussed with respect to the dissolved hydrogen concentration. Novel cultivation data demonstrate the sensitivity of C. saccharolyticus to increased hydrogen levels regarding substrate load and nitrogen limitation. In addition, special attention is given to the rhamnose metabolism, which represents an unusual type of redox balancing. Finally, several approaches are suggested to improve biohydrogen production by C. saccharolyticus.

Alkene-based self-assembled monolayers grafted on oxidized Pt surfaces were used as a scaffold to covalently immobilize oxidase enzymes, with the aim to develop an amperometric biosensor platform. NH2-terminated organic layers were functionalized with either aldehyde (CHO) or N-hydroxysuccinimide (NHS) ester-derived groups, to provide anchoring points for enzyme immobilization. The functionalized Pt surfaces were characterized by X-ray photoelectron spectroscopy (XPS), static water contact angle (CA), infrared reflection absorption spectroscopy (IRRAS) and atomic force microscopy (AFM). Glucose oxidase (GOX) was covalently attached to the functionalized Pt electrodes, either with or without additional glutaraldehyde crosslinking. The responses of the acquired sensors to glucose concentrations ranging from 0.5 to 100 mM were monitored by chronoamperometry. Furthermore, lactate oxidase (LOX) and human hydroxyacid oxidase (HAOX) were successfully immobilized onto the PtOx surface platform. The performance of the resulting lactate sensors was investigated for lactate concentrations ranging from 0.05 to 20 mM. The successful attachment of active enzymes (GOX, LOX and HAOX) on Pt electrodes demonstrates that covalently functionalized PtOx surfaces provide a universal platform for the development of oxidase enzyme-based sensors. (C) 2016 Elsevier B.V. All rights reserved.

The cytoplasmic membrane of a prokaryotic cell consists of a lipid bilayer or a monolayer that shields the cellular content from the environment. In addition, the membrane contains proteins that are responsible for transport of proteins and metabolites as well as for signalling and energy transduction. Maintenance of the functionality of the membrane during changing environmental conditions relies on the cell’s potential to rapidly adjust the lipid composition of its membrane. Despite the fundamental chemical differences between bacterial ester lipids and archaeal ether lipids, both types are functional under a wide range of environmental conditions. We here provide an overview of archaeal and bacterial strategies of changing the lipid compositions of their membranes. Some molecular adjustments are unique for archaea or bacteria, whereas others are shared between the two domains. Strikingly, shared adjustments were predominantly observed near the growth boundaries of bacteria. Here, we demonstrate that the presence of membrane spanning ether-lipids and methyl branches shows a striking relationship with the growth boundaries of archaea and bacteria. Electronic supplementary material The online version of this article (doi:10.1007/s00792-017-0939-x) contains supplementary material, which is available to authorized users.

The strong advances in synthetic biology enable the engineering of novel functions and complex biological features in unprecedented ways, such as implementing synthetic autotrophic metabolism into heterotrophic hosts. A key challenge for the sustainable production of fuels and chemicals entails the engineering of synthetic autotrophic organisms that can effectively and efficiently fix carbon dioxide by using sustainable energy sources. This challenge involves the integration of carbon fixation and energy uptake systems. A variety of carbon fixation pathways and several types of photosystems and other energy uptake systems can be chosen and, potentially, modularly combined to design synthetic autotrophic metabolism. Prior to implementation, these designs can be evaluated by the combination of several computational pathway analysis techniques. Here we present a systematic, integrated in silico analysis of photo-electro-autotrophic pathway designs, consisting of natural and synthetic carbon fixation pathways, a proton-pumping rhodopsin photosystem for ATP regeneration and an electron uptake pathway. We integrated Flux Balance Analysis of the heterotrophic chassis Escherichia coli with kinetic pathway analysis and thermodynamic pathway analysis (Max-min Driving Force). The photo-electro-autotrophic designs are predicted to have a limited potential for anaerobic, autotrophic growth of E. coli, given the relatively low ATP regenerating capacity of the proton pumping rhodopsin photosystems and the high ATP maintenance of E. coli. If these factors can be tackled, our analysis indicates the highest growth potential for the natural reductive tricarboxylic acid cycle and the synthetic pyruvate synthase–pyruvate carboxylate -glyoxylate bicycle. Both carbon fixation cycles are very ATP efficient, while maintaining fast kinetics, which also results in relatively low estimated protein costs for these pathways. Furthermore, the synthetic bicycles are highly thermodynamic favorable under conditions analysed. However, the most important challenge identified for improving photo-electro-autotrophic growth is increasing the proton-pumping rate of the rhodopsin photosystems, allowing for higher ATP regeneration. Alternatively, other designs of autotrophy may be considered, therefore the herein presented integrated modeling approach allows synthetic biologists to evaluate and compare complex pathway designs before experimental implementation., PLoS ONE, 11 (6), ISSN:1932-6203

Orally administered phages to control zoonotic pathogens face important challenges, mainly related to the hostile conditions found in the gastrointestinal tract (GIT). These include temperature, salinity and primarily pH, which is exceptionally low in certain compartments. Phage survival under these conditions can be jeopardized and undermine treatment. Strategies like encapsulation have been attempted with relative success, but are typically complex and require several optimization steps. Here we report a simple and efficient alternative, consisting in the genetic engineering of phages to display lipids on their surfaces. Escherichia coli phage T7 was used as a model and the E. coli PhoE signal peptide was genetically fused to its major capsid protein (10A), enabling phospholipid attachment to the phage capsid. The presence of phospholipids on the mutant phages was confirmed by High Performance Thin Layer Chromatography, Dynamic Light Scattering and phospholipase assays. The stability of phages was analysed in simulated GIT conditions, demonstrating improved stability of the mutant phages with survival rates 102107 pfu.mL1 higher than wild-type phages. Our work demonstrates that phage engineering can be a good strategy to improve phage tolerance to GIT conditions, having promising application for oral administration in veterinary medicine., This work was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and under the scope of the Project PTDC/BBB-BSS/6471/2014 (POCI-01-0145-FEDER-016678). Franklin L. Nobrega and Ana Rita Costa acknowledge FCT for grants SFRH/BD/86462/2012 and SFRH/BPD/94648/2013, respectively. Melvin F. Siliakus acknowledges funding from the Biobased Ecologically Balanced Sustainable Industrial Chemistry (BE-BASIC) foundation. Electron microscopy work was performed at the Wageningen Electron Microscopy Centre (WEMC) of Wageningen University.

The role of inorganic pyrophosphate (PPi) as an energy carrier in the central metabolism of the extremely thermophilic bacterium Caldicellulosiruptor saccharolyticus was investigated. In agreement with its annotated genome sequence, cell extracts were shown to exhibit PPi-dependent phosphofructokinase and pyruvate phosphate dikinase activity. In addition, membrane-bound pyrophosphatase activity was demonstrated, while no significant cytosolic pyrophosphatase activity was detected. During the exponential growth phase, high PPi levels (approximately 4 +/- 2 mM) and relatively low ATP levels (0.43 +/- 0.07 mM) were found, and the PPi/ATP ratio decreased 13-fold when the cells entered the stationary phase. Pyruvate kinase activity appeared to be allosterically affected by PPi. Altogether, these findings suggest an important role for PPi in the central energy metabolism of C. saccharolyticus.

The chlorite dismutase (Cld) of Pseudomonas chloritidismutans was purified from the periplasmic fraction in one step by hydroxyapatite chromatography. The enzyme has a molecular mass of 110 kDa and consists of four 31-kDa subunits. Enzyme catalysis followed Michaelis-Menten kinetics, with Vmax and K(m) values of 443 U mg(-1) and 84 microM, respectively. A pyridine-NaOH-dithionite-reduced Cld revealed a Soret peak at 418 nm, indicative for protoheme IX. The spectral data indicate the presence of 1.5 mol protoheme IX mol(-1) tetrameric enzyme while metal analysis revealed 2.2 mol iron mol(-1) tetrameric enzyme. High concentrations of chlorite resulted in the disappearance of the Soret peak, which coincided with loss in activity. Electron paramagnetic resonance analyses showed an axial high-spin ferric iron signal. Cld was inhibited by cyanide, azide, but not by hydroxylamine or 3-amino-1,2,3-triazole. Remarkably, the activity was drastically enhanced by kosmotropic salts, and chaotropic salts decreased the activity, in accordance with the Hofmeister series. Chlorite conversion in the presence of 18O-labeled water did not result in the formation of oxygen with a mass of 34 (16O-18O) or a mass of 36 ((18)O-(18)O), indicating that water is not a substrate in the reaction and that both oxygen atoms originate from chlorite.

Sulfolobus acidocaldarius 2-keto-3-deoxygluconate aldolase (SacKdgA) displays optimal activity at 95 °C and is studied as a model enzyme for aldol condensation reactions. For application of SacKdgA at lower temperatures, a library of randomly generated mutants was screened for improved synthesis of 2-keto-3-deoxygluconate from pyruvate and glyceraldehyde at the suboptimal temperature of 50 °C. The single mutant SacKdgA-V193A displayed a threefold increase in activity compared with wild type SacKdgA. The increased specific activity at 40–60 °C of this mutant was observed, not only for the condensation of pyruvate with glyceraldehyde, but also for several unnatural acceptor aldehydes. The optimal temperature for activity of SacKdgA-V193A was lower than for the wild type enzyme, but enzymatic stability of the mutant was similar to that of the wild type, indicating that activity and stability were uncoupled. Valine193 has Van der Waals interactions with Lysine153, which covalently binds the substrate during catalysis. The mutation V193A introduced space close to this essential residue, and the increased activity of the mutant presumably resulted from increased flexibility of Lysine153. The increased activity of SacKdgA-V193A with unaffected stability demonstrates the potential for optimizing extremely thermostable aldolases for synthesis reactions at moderate temperatures.

A novel anaerobic, thermophilic, Gram-positive, spore-forming, and sugar-fermenting bacterium (strain TLO) was isolated from a geothermal spring in Ayaş, Turkey. The cells were straight to curved rods, 0.4-0.6 microm in diameter and 3.5-10 microm in length. Spores were terminal and round. The temperature range for growth was 40-80 degrees C, with an optimum at 70 degrees C. The pH optimum was between 6.3 and 6.8. Strain TLO has the capability to ferment a wide variety of mono-, di-, and polysaccharides and proteinaceous substrates, producing mainly lactate, next to acetate, ethanol, alanine, H(2), and CO(2). Remarkably, the bacterium was able to grow in an atmosphere of up to 25% of CO as sole electron donor. CO oxidation was coupled to H(2) and CO(2) formation. The G + C content of the genomic DNA was 35.1 mol%. Based on 16S rRNA gene sequence analysis and the DNA-DNA hybridization data, this bacterium is most closely related to Thermoanaerobacter thermohydrosulfuricus and Thermoanaerobacter siderophilus (99% similarity for both). However, strain TLO differs from Thermoanaerobacter thermohydrosulfuricus in important aspects, such as CO-utilization and lipid composition. These differences led us to propose that strain TLO represents a subspecies of Thermoanaerobacter thermohydrosulfuricus, and we therefore name it Thermoanaerobacter thermohydrosulfuricus subsp. carboxydovorans.

Caldicellulosiruptor saccharolyticus is an extremely thermophilic, gram-positive anaerobe which ferments cellulose-, hemicellulose- and pectin-containing biomass to acetate, CO 2 , and hydrogen. Its broad substrate range, high hydrogen-producing capacity, and ability to coutilize glucose and xylose make this bacterium an attractive candidate for microbial bioenergy production. Here, the complete genome sequence of C. saccharolyticus , consisting of a 2,970,275-bp circular chromosome encoding 2,679 predicted proteins, is described. Analysis of the genome revealed that C. saccharolyticus has an extensive polysaccharide-hydrolyzing capacity for cellulose, hemicellulose, pectin, and starch, coupled to a large number of ABC transporters for monomeric and oligomeric sugar uptake. The components of the Embden-Meyerhof and nonoxidative pentose phosphate pathways are all present; however, there is no evidence that an Entner-Doudoroff pathway is present. Catabolic pathways for a range of sugars, including rhamnose, fucose, arabinose, glucuronate, fructose, and galactose, were identified. These pathways lead to the production of NADH and reduced ferredoxin. NADH and reduced ferredoxin are subsequently used by two distinct hydrogenases to generate hydrogen. Whole-genome transcriptome analysis revealed that there is significant upregulation of the glycolytic pathway and an ABC-type sugar transporter during growth on glucose and xylose, indicating that C. saccharolyticus coferments these sugars unimpeded by glucose-based catabolite repression. The capacity to simultaneously process and utilize a range of carbohydrates associated with biomass feedstocks is a highly desirable feature of this lignocellulose-utilizing, biofuel-producing bacterium.

Reduced nicotinamide adenine dinucleotide phosphate (NADPH) is an essential electron donor in all organisms. It provides the reducing power that drives numerous anabolic reactions, including those responsible for the biosynthesis of all major cell components and many products in biotechnology. The efficient synthesis of many of these products, however, is limited by the rate of NADPH regeneration. Hence, a thorough understanding of the reactions involved in the generation of NADPH is required to increase its turnover through rational strain improvement. Traditionally, the main engineering targets for increasing NADPH availability have included the dehydrogenase reactions of the oxidative pentose phosphate pathway and the isocitrate dehydrogenase step of the tricarboxylic acid (TCA) cycle. However, the importance of alternative NADPH-generating reactions has recently become evident. In the current review, the major canonical and non-canonical reactions involved in the production and regeneration of NADPH in prokaryotes are described, and their key enzymes are discussed. In addition, an overview of how different enzymes have been applied to increase NADPH availability and thereby enhance productivity is provided.

Recent studies on the occurrence of (per)chlorate-reducing bacteria have resulted in the characterization of strains capable of dissimilatory (per)chlorate reduction. Phylogenetic analysis has shown that these bacteria are members of the Proteobacteria. Strains have been isolated from polluted and pristine sites, but only strains from polluted sites have been characterized in detail and deposited in culture collections. Herein we describe the isolation and characterization of perchlorate-reducing bacterium strain MA-1T and chlorate-reducing bacterium strain ASK-1, respectively isolated from a pristine and a chlorate-polluted site. Both isolates are members of the Proteobacteria. The 16S rRNA gene sequence similarity of MA-1T to Dechloromonas agitata DSM 13637T is 97·6 %, but the relatedness in DNA–DNA reassociation is only 37 %. Therefore, we propose to classify strain MA-1T (=DSM 15637T=ATCC BAA-776T) as the type strain of a novel species, Dechloromonas hortensis sp. nov. Strain ASK-1 and a previously described strain GR-1 show 100 and 99 % 16S rRNA gene sequence similarity to Pseudomonas chloritidismutans DSM 13592T and Dechlorosoma suillum DSM 13638T, respectively. DNA–DNA hybridization studies indicated that strains ASK-1 and GR-1 are related at the species level to P. chloritidismutans DSM 13592T (79 %) and Dechlorosoma suillum DSM 13638T (85 %), respectively. As suggested previously, Dechlorosoma suillum appears to be a later heterotypic synonym of Azospira oryzae. Although strain ASK-1 is identified as P. chloritidismutans, its morphology and growth requirements are different from those of the type strain.

An early divergence in evolution has resulted in two prokaryotic domains, the Bacteria and the Archaea. Whereas the central metabolic routes of bacteria and eukaryotes are generally well-conserved, variant pathways have developed in Archaea involving several novel enzymes with a distinct control. A spectacular example of convergent evolution concerns the glucose-degrading pathways of saccharolytic archaea. The identification, characterization and comparison of the glycolytic enzymes of a variety of phylogenetic lineages have revealed a mosaic of canonical and novel enzymes in the archaeal variants of the Embden–Meyerhof and the Entner–Doudoroff pathways. By means of integrating results from biochemical and genetic studies with recently obtained comparative and functional genomics data, the structure and function of the archaeal glycolytic routes, the participating enzymes and their regulation are re-evaluated.

A Gram-negative, facultatively anaerobic, rod-shaped, dissimilatory chlorate-reducing bacterium, strain AW-1(T), was isolated from biomass of an anaerobic chlorate-reducing bioreactor. Phylogenetic analysis of the 16S rDNA sequence showed 100% sequence similarity to Pseudomonas stutzeri DSM 50227 and 98.6% sequence similarity to the type strain of P. stutzeri (DSM 5190(T)). The species P. stutzeri possesses a high degree of genotypic and phenotypic heterogeneity. Therefore, eight genomic groups, termed genomovars, have been proposed based upon deltaTm values, which were used to evaluate the quality of the pairing within heteroduplexes formed by DNA-DNA hybridization. In this study, DNA-DNA hybridization between strain AW-1(T) and P. stutzeri strains DSM 50227 and DSM 5190(T) revealed respectively 80.5 and 56.5% similarity. DNA-DNA hybridization between P. stutzeri strains DSM 50227 and DSM 5190(T) revealed 48.4% similarity. DNA-DNA hybridization indicated that strain AW-1(T) is not related at the species level to the type strain of P. stutzeri. However, strain AW-1(T) and P. stutzeri DSM 50227 are related at the species level. The physiological and biochemical properties of strain AW-1(T) and the two P. stutzeri strains were compared. A common characteristic of P. stutzeri strains is the ability to denitrify. However, in growth experiments, strain AW-1(T) could use only chlorate or oxygen as an electron acceptor and not nitrate, perchlorate or bromate. Strain AW-1(T) is the first chlorate-reducing bacterium described that does not possess another oxyanion-reduction pathway. Cell extracts of strain AW-1(T) showed chlorate and bromate reductase activities but not nitrate reductase activity. P. stutzeri strains DSM 50227 and DSM 5190(T) could use nitrate or oxygen as an electron acceptor, but not chlorate. Chlorate reductase activity, in addition to nitrate reductase activity, was detected in cell extracts of both P. stutzeri strains. Chlorite dismutase activity was absent in extracts of both P. stutzeri strains but was present in extracts of strain AW-1(T). Based on the hybridization experiments and the physiological and biochemical data, it is proposed that strain AW-1(T) be classified as a novel species of Pseudomonas, Pseudomonas chloritidismutans sp. nov. The type strain is strain AW-1(T) (= DSM 13592(T) = ATCC BAA-443(T)).

In current purification processes optimization of the capture step generally has a large impact on cost reduction. At present, valuable biomolecules are often produced in relatively low concentrations and, consequently, the eventual selective separation from complex mixtures can be rather inefficient. A separation technology based on a very selective high-affinity binding may overcome these problems. Proteins in their natural environment manifest functionality by interacting specifically and often with relatively high affinity with other molecules, such as substrates, inhibitors, activators, or other proteins. At present, antibodies are the most commonly used binding proteins in numerous applications. However, antibodies do have limitations, such as high production costs, low stability, and a complex patent landscape. A novel approach is therefore to use non-immunoglobulin engineered binding proteins in affinity purification. In order to obtain engineered binders with a desired specificity, a large mutant library of the new to-be-developed binding protein has to be created and screened for potential binders. A powerful technique to screen and select for proteins with desired properties from a large pool of variants is phage display. Here, we indicate several criteria for potential binding protein scaffolds and explain the principle of M13 phage display. In addition, we describe experimental protocols for the initial steps in setting up a M13 phage display system based on the pComb3X vector, including construction of the phagemid vector, production of phages displaying the protein of interest, and confirmation of display on the M13 phage.

Acetoin reductase is an important enzyme for the fermentative production of 2,3-butanediol, a chemical compound with a very broad industrial use. Here, we report on the discovery and characterization of an acetoin reductase from Clostridium beijerinckii NCIMB 8052. An in silico screen of the C. beijerinckii genome revealed eight potential acetoin reductases. One of them ( CBEI_1464 ) showed substantial acetoin reductase activity after expression in Escherichia coli . The purified enzyme ( C. beijerinckii acetoin reductase [Cb-ACR]) was found to exist predominantly as a homodimer. In addition to acetoin (or 2,3-butanediol), other secondary alcohols and corresponding ketones were converted as well, provided that another electronegative group was attached to the adjacent C-3 carbon. Optimal activity was at pH 6.5 (reduction) and 9.5 (oxidation) and around 68°C. Cb-ACR accepts both NADH and NADPH as electron donors; however, unlike closely related enzymes, NADPH is preferred ( K m , 32 μM). Cb-ACR was compared to characterized close homologs, all belonging to the “threonine dehydrogenase and related Zn-dependent dehydrogenases” (COG1063). Metal analysis confirmed the presence of 2 Zn 2+ atoms. To gain insight into the substrate and cofactor specificity, a structural model was constructed. The catalytic zinc atom is likely coordinated by Cys 37 , His 70 , and Glu 71 , while the structural zinc site is probably composed of Cys 100 , Cys 103 , Cys 106 , and Cys 114 . Residues determining NADP specificity were predicted as well. The physiological role of Cb-ACR in C. beijerinckii is discussed.

Strain GR-1 is one of several recently isolated bacterial species that are able to respire by using chlorate or perchlorate as the terminal electron acceptor. The organism performs a complete reduction of chlorate or perchlorate to chloride and oxygen, with the intermediate formation of chlorite. This study describes the purification and characterization of the key enzyme of the reductive pathway, the chlorate and perchlorate reductase. A single enzyme was found to catalyze both the chlorate- and perchlorate-reducing activity. The oxygen-sensitive enzyme was located in the periplasm and had an apparent molecular mass of 420 kDa, with subunits of 95 and 40 kDa in an α 3 β 3 composition. Metal analysis showed the presence of 11 mol of iron, 1 mol of molybdenum, and 1 mol of selenium per mol of heterodimer. In accordance, quantitative electron paramagnetic resonance spectroscopy showed the presence of one [3Fe-4S] cluster and two [4Fe-4S] clusters. Furthermore, two different signals were ascribed to Mo(V). The K m values for perchlorate and chlorate were 27 and

Thermophilic anaerobic biodegradation of tetrachloroethene (PCE) was investigated with various inocula from geothermal and nongeothermal areas. Only polluted harbor sediment resulted in a stable enrichment culture that converted PCE via trichloroethene to cis -1,2-dichloroethene at the optimum temperature of 60 to 65°C. After several transfers, methanogens were eliminated from the culture. Dechlorination was supported by lactate, pyruvate, fructose, fumarate, and malate as electron donor but not by H 2 , formate, or acetate. Fumarate and l -malate led to the highest dechlorination rate. In the absence of PCE, fumarate was fermented to acetate, H 2 , CO 2 , and succinate. With PCE, less H 2 was formed, suggesting that PCE competed for the reducing equivalents leading to H 2 . PCE dechlorination, apparently, was not outcompeted by fumarate as electron acceptor. At the optimum dissolved PCE concentration of ∼60 μM, a high dechlorination rate of 1.1 μmol h −1 mg −1 (dry weight) was found, which indicates that the dechlorination is not a cometabolic activity. Microscopic analysis of the fumarate-grown culture showed the dominance of a long thin rod. Molecular analysis, however, indicated the presence of two dominant species, both belonging to the low-G+C gram positives. The highest similarity was found with the genus Dehalobacter (90%), represented by the halorespiring organism Dehalobacter restrictus , and with the genus Desulfotomaculum (86%).

A predicted esterase ( EstA) with an unusual new domain from the hyperthermophilic bacterium Thermotoga maritima has been cloned and overexpressed in Escherichia coli. The purified protein was crystallized by the hanging-drop vapour-diffusion technique in the presence of lithium sulfate and polyethylene glycol 8000. Selenomethionine-substituted EstA crystals were obtained under the same conditions and three different-wavelength data sets were collected to 2.6 angstrom resolution. The crystal belongs to space group H32, with unit-cell parameters a = b = 130.2, c = 306.2 angstrom. There are two molecules in the asymmetric unit, with a VM of 2.9 angstrom(3) Da(-1) and 58% solvent content.

The fermentative conversion of glucose in anaerobic hyperthermophilic Archaea is a variant of the classical Embden-Meyerhof pathway found in Bacteria and Eukarya. A major difference of the archaeal glycolytic pathway concerns the conversion of glyceraldehyde-3-phosphate. In the hyperthermophilic archaeon Pyrococcus furiosus, this reaction is catalyzed by an unique enzyme, glyceraldehyde-3-phosphate ferredoxin oxidoreductase (GAPOR). Here, we report the isolation, characterization, and transcriptional analysis of the GAPOR-encoding gene. GAPOR is related to a family of ferredoxin-dependent tungsten enzymes in (hyper)thermophilic Archaea and, in addition, to a hypothetical protein in Escherichia coli. Electron paramagnetic resonance analysis of the purified P. furiosus GAPOR protein confirms the anticipated involvement of tungsten in catalysis. During glycolysis in P. furiosus, GAPOR gene expression is induced, whereas the activity of glyceraldehyde-3-phosphate dehydrogenase is repressed. It is discussed that this unprecedented unidirectional reaction couple in the pyrococcal glycolysis and gluconeogenesis gives rise to a novel site of glycolytic regulation that might be widespread among Archaea.

Anaerobic carbon mineralization is a major regulator of soil methane production, but the relationship between these processes is variable. To explain the dynamics of this relationship a model was developed, which comprises the dynamics of alternative electron-acceptors, of acetate and of methanogenic biomass. Major assumptions are: (i) alternative electron-acceptors suppress methanogenesis and (ii) the rate of electron-acceptor reduction is controlled by anaerobic carbon mineralization. The model was applied to anaerobic incubation experiments with slurried soil samples from a drained and an undrained peat soil in the Netherlands to test the model and to further interpret the data. Three parameters were fitted with a Monte Carlo method, using experimentally determined time series of methane, carbon dioxide and acetate. The fitted parameters were the initial concentration of electron-acceptors, the initial concentration of methanogenic biomass and the maximum relative growth rate of methanogenic biomass. Simulated and measured time courses of methane corresponded reasonably well. The model as such stresses the importance of alternative electron-acceptors. At the drained site initial alternative electron-acceptor concentrations were between 0.3 and 0.8 mol electron equivalents (el. eqv.) kg −1 dw soil, whereas at the undrained site they were between 0.0 and 0.3 mol el. eqv. kg −1 dw soil, depending on the experimental treatments. The sum of measured NO 3 − and SO 4 2− concentrations and estimated maximum Fe 3+ and Mn 4+ concentrations was much lower than the fitted concentrations of alternative electron-acceptors. Apparently, reduction of unknown electron-acceptors consumed a large part of anaerobically-mineralized carbon which, therefore, was not available for methanogenesis.

The biotech industry is continuously seeking for new or improved biocatalysts. The success of these efforts is often hampered by the lack of an efficient screening assay. Thus, to be able to extend the number of enzymes available for industrial applications, high-throughput screening and selection methods are required. In the last few years an impressive range of screening and selection strategies has been developed. In this review, we will mainly focus on in vivo reporter systems in which the activity of a reporter is controlled by the activity of an enzyme of interest. Different mechanisms can be distinguished: (a) binding of the product of the enzymatic reaction to a transcriptional regulator and thereby turning on transcription of the reporter; (b) direct modification of a transcriptional regulator by the enzyme resulting in expression of the reporter; (c) binding of the product to a regulatory riboswitch or ribozyme, resulting in translation of the reporter; and (d) direct modification of the reporter by the enzyme, altering the reporter's activity. The choice for either a selection or a screening strategy depends on the type of reporter, e.g. providing antibiotic resistance (selection) or transmitting a fluorescent signal (screening). Although developing the specificity of each of these reporter-based selection or screening systems towards a certain enzymatic reaction is not yet straightforward, their adjustable modular design appears to be a promise for general applicability in the near future.

The production of biohydrogen from glycerol, by the hyperthermophilic bacterium Thermotoga maritima DSM 3109, was investigated in batch and chemostat systems. T. maritima converted glycerol to mainly acetate, CO2 and H2. Maximal hydrogen yields of 2.84 and 2.41 hydrogen per glycerol were observed for batch and chemostat cultivations, respectively. For batch cultivations: i) hydrogen production rates decreased with increasing initial glycerol concentration, ii) growth and hydrogen production was optimal in the pH range of 7–7.5, and iii) a yeast extract concentration of 2 g/l led to optimal hydrogen production. Stable growth could be maintained in a chemostat, however, when dilution rates exceeded 0.025 h−1 glycerol conversion was incomplete. A detailed overview of the catabolic pathway involved in glycerol fermentation to hydrogen by T. maritima is given. Based on comparative genomics the ability to grow on glycerol can be considered as a general trait of Thermotoga species. The exceptional bioenergetics of hydrogen formation from glycerol is discussed.

Glycosaminoglycans are biologically active polysaccharides that are found ubiquitously in the animal kingdom. The biosynthesis of these complex polysaccharides involves complicated reactions that turn the simple glycosaminoglycan backbone into highly heterogeneous structures. One of the modification reactions is the epimerization of D-glucuronic acid to its C5-epimer L-iduronic acid, which is essential for the function of heparan sulfate. Although L-iduronic acid residues have been shown to exist in polysaccharides of some prokaryotes, there has been no experimental evidence for the existence of a prokaryotic D-glucuronyl C5-epimerase. This work for the first time reports on the identification of a bacterial enzyme with D-glucuronyl C5-epimerase activity. A gene of the marine bacterium Bermanella marisrubri sp. RED65 encodes a protein (RED65_08024) of 448 amino acids that has an overall 37% homology to the human D-glucuronic acid C5-epimerase. Alignment of this peptide with the human and mouse sequences revealed a 60% similarity at the carboxyl terminus. The recombinant protein expressed in Escherichia coli showed epimerization activity toward substrates generated from heparin and the E. coli K5 capsular polysaccharide, thereby providing the first evidence for bacterial D-glucuronyl C5-epimerase activity. These findings may eventually be used for modification of mammalian glycosaminoglycans.

A novel enzyme that catalyzes the disproportionation of chlorite into chloride and oxygen was purified from a gram-negative bacterium, strain GR-1 to homogeneity. A four-step purification procedure comprising Q-Sepharose, hydroxyapatite, and phenyl-Superose chromatography and ultrafiltration resulted in a 13.7-fold purified enzyme with a final specific activity of 2.0 mmol min-1 (mg protein)-1. The dismutase obeyed Michaelis-Menten kinetics. The Vmax and Km calculated for chlorite were 2,200 U (mg protein)-1 and 170 microM, respectively. Dismutase activity was inhibited by hydroxylamine, cyanide, and azide, but not by 3-amino-1,2,4-triazole. Chlorite dismutase had a molecular mass of 140 kDa and consisted of four 32-kDa subunits. The enzyme was red-colored and had a Soret peak at 392 nm. Per subunit, it contained 0.9 molecule of protoheme IX and 0.7 molecule of iron. Chlorite dismutase displayed maxima for activity at pH 6.0 and 30 degrees C.

10.1016/j.egypro.2012.09.036 Given the highly reduced state of carbon in glycerol and its availability as a substantial byproduct of biodiesel production, glycerol is of special interest for sustainable biofuel production. Glycerol was used as a substrate for biohydrogen production using the hyperthermophilic bacterium, Thermotoga maritima and Thermotoga neapolitana. Both species metabolized glycerol to mainly acetate and hydrogen. At glycerol concentrations of 2.5 g/L, hydrogen was produced with a yield of 2.75 and 2.65 mol H2/mol glycerol consumed by T. maritima and T. neapolitana respectively. Additionally, the effect of initial pH (ranging between pH 5.0-8.5) and yeast extract concentrations (0.5, 1, 2, 4 g/L) on glycerol fermentation by T. neapolitana was investigated in batch systems. An initial pH value of around 7 was optimal for hydrogen production by T. neapolitana. Lower concentration of yeast extract resulted in a lower H2 production, however increasing the concentration from 2 to 4 g/L did not affect H2 production.

To gain more insight into the butanol stress response of Clostridium acetobutylicum the transcriptional response of a steady state acidogenic culture to different levels of n -butanol (0.25–1%) was investigated. No effect was observed on the fermentation pattern and expression of typical solvent genes ( aad , ctfA/B , adc , bdhA/B , ptb , buk ). Elevated levels of butanol mainly affected class I heat-shock genes ( hrcA , grpE , dnaK , dnaJ , groES , groEL , hsp90 ), which were upregulated in a dose- and time-dependent manner, and genes encoding proteins involved in the membrane composition ( fab and fad or glycerophospholipid related genes) and various ABC-transporters of unknown specificity. Interestingly, fab and fad genes were embedded in a large, entirely repressed cluster (CAC1988–CAC2019), which inter alia encoded an iron-specific ABC-transporter and molybdenum-cofactor synthesis proteins. Of the glycerophospholipid metabolism, the glycerol-3-phosphate dehydrogenase ( glpA ) gene was highly upregulated, whereas a glycerophosphodiester ABC-transporter ( ugpAEBC ) and a phosphodiesterase ( ugpC ) were repressed. On the megaplasmid, only a few genes showed differential expression, e.g. a rare lipoprotein (CAP0058, repressed) and a membrane protein (CAP0102, upregulated) gene. Observed transcriptional responses suggest that C. acetobutylicum reacts to butanol stress by induction of the general stress response and changing its cell envelope and transporter composition, but leaving the central catabolism unaffected.

The hyperthermophilic archaeon Pyrococcus furiosus was found to form substantial amounts of l-alanine during batch growth on either cellobiose, maltose or pyruvate. Acetate, CO2 and H2 were produced next to alanine. The carbon- and electron balances were complete for all three substrates. Under standard growth conditions (N2/CO2 atmosphere) an alanine/acetate ratio of about 0.3 was found for either substrate. The alanine /acetate ratio was influenced, however, by the hydrogen partial pressure. In the presence of S0 or in coculture with Methanococcus jannaschii this ratio was only 0.07, whereas under a H2/CO2 atmosphere this ratio could amount up to 0.8. Alanine formation was also aflected by the NHinf4sup+concentration, i.e. below 4 mM, NHinf4sup+becomes limiting to alanine formation. Alanine formation was shown to occur via an alanine aminotransferase, which exhibited a specific activity in cell-free extract of up to 6.0 U/mg (90°C; direction of pyruvate formation). The alanine aminotransferase probably cooperates with glutamate dehydrogenase (up to 23 U/mg; 90°C) and ferredoxin: NADP+ oxidoreductase (up to 0.7 U/mg, using methyl viologen; 90°C) to recycle the electron acceptors involved in catabolism. Thus, the existence of this unusual alanine-forming branch enables P. furiosus to adjust its fermentation, depending on the redox potential of the terminal electron acceptor.

Acetoin reductase (ACR) catalyzes the conversion of acetoin to 2,3-butanediol. Under certain conditions, Clostridium acetobutylicum ATCC 824 (and strains derived from it) generates both d - and l -stereoisomers of acetoin, but because of the absence of an ACR enzyme, it does not produce 2,3-butanediol. A gene encoding ACR from Clostridium beijerinckii NCIMB 8052 was functionally expressed in C. acetobutylicum under the control of two strong promoters, the constitutive thl promoter and the late exponential adc promoter. Both ACR-overproducing strains were grown in batch cultures, during which 89 to 90% of the natively produced acetoin was converted to 20 to 22 mM d -2,3-butanediol. The addition of a racemic mixture of acetoin led to the production of both d -2,3-butanediol and meso -2,3-butanediol. A metabolic network that is in agreement with the experimental data is proposed. Native 2,3-butanediol production is a first step toward a potential homofermentative 2-butanol-producing strain of C. acetobutylicum .

Hydrogen produced from biomass by bacteria and archaea is an attractive renewable energy source. However, to make its application more feasible, microorganisms are needed with high hydrogen productivities. For several reasons, hyperthermophilic and extremely thermophilic bacteria and archaea are promising is this respect. In addition to the high polysaccharide-hydrolysing capacities of many of these organisms, an important advantage is their ability to use most of the reducing equivalents (e.g. NADH, reduced ferredoxin) formed during glycolysis for the production of hydrogen, enabling H2/hexose ratios of between 3.0 and 4.0. So, despite the fact that the hydrogen-yielding reactions, especially the one from NADH, are thermodynamically unfavourable, high hydrogen yields are obtained. In this review we focus on three different mechanisms that are employed by a few model organisms, viz. Caldicellulosiruptor saccharolyticus and Thermoanaerobacter tengcongensis, Thermotoga maritima, and Pyrococcus furiosus, to efficiently produce hydrogen. In addition, recent developments to improve hydrogen production by hyperthermophilic and extremely thermophilic bacteria and archaea are discussed.

Reductive dechlorination of 1,2-dichloroethane (1,2-DCA) to ethylene and chloroethane (CA) by crude cell extracts of Methanobacterium thermoautotrophicum delta H with H2 as the electron donor was stimulated by Mg-ATP. The heterodisulfide of coenzyme M (CoM) and 7-mercaptoheptanoylthreonine phosphate together with Mg-ATP partially inhibited ethylene production but stimulated CA production compared Mg-ATP alone. The pH optimum for the dechlorination was 6.8 (at 60 degrees C). Michaelis-Menten kinetics for initial product formation rates with different 1,2-DCA concentrations indicated the enzymatic character of the dechlorination. Apparent Kms for 1,2-DCA of 89 and 119 microM and Vmaxs of 34 and 20 pmol/min/mg of protein were estimated for ethylene and CA production, respectively. 3-Bromopropanesulfonate, a specific inhibitor for methyl-CoM reductase, completely inhibited dechlorination of 1,2-DCA. Purified methyl-CoM reductase, together with flavin adenine dinucleotide and a crude component A fraction which reduced the nickel of factor F430 in methyl-CoM reductase, converted 1,2-DCA to ethylene and CA with H2 as the electron donor. In this system, methyl-CoM reductase was also able to transform its own inhibitor 2-bromoethanesulfonate to ethylene.