Search

The three dimensional phenomena in the weakly ionized plasma near an anode and a cathode of a Faraday type MHD generator are studied by time dependent three dimensional numerical analyses, where the radiation is taken into account. The Navier–Stokes equations are solved with an implicit total variation diminishing scheme with the radiative heat transfer solved by a finite volume method, while the Maxwell equations are solved by using the Galerkin finite element method. The following results are obtained. In the case of the short circuit load (I=160 A), the strong Hall effect induces a strong electrical current concentration at the upstream edge of the anode and the downstream edge of the cathode, resulting in high temperature and high conductivity there. The Lorentz force acting at the spot of electrical current concentration may induce inter-anode breakdown, although the present generator does not suffer from inter-anode breakdown. The Lorentz force working at the electrical current concentration at the cathode, on the other hand, brings the concentration current downstream, resulting in strong inter-cathode breakdown. The radiative heat transfer becomes very high locally, resulting in 700 MW/m3, but the effect can be neglected on the overall generator performance because the plasma is very dense. [Copyright &y& Elsevier]

A new power control method is proposed which is suitable for the MHD power generation system which consists of nonequilibrium disk generator and line-commutated inverter. The thermal input of the generator is controlled by changing the inlet stagnation pressure, whereas the seed mass flow rate instead of the inlet stagnation pressure is utilized as a manipulated variable of power control system. It is possible that the proposed method can realize both high performance for part load operation and fast output power control of which the time constant is much shorter than the response time of thermal input. Numerical simulations are carried out for the MHD power generation system connected to infinite bus and then it is confirmed that the system is stable and shows excellent power control performance. [ABSTRACT FROM AUTHOR]

Stability of large-scale coal-fired MHD channels is studied by (1) linearized stability analysis, and (2) time-dependent 1-D analysis. The channel length is 15 m with 600 electrode pairs, and the output power ranges from 220.6 MW through 258.7 MW. Linearized stability analyses show that the Faraday channels operated with fixed loading resistance are stable, whereas the two waves of u and u - a (u, a: gas and sound velocity) become unstable in the Faraday channel with fixed loading factor. Two waves of u and u - a are unstable in the diagonal channel with fixed loading current and the u + a wave becomes unstable in the diagonal channel with fixed electrode current. Time-dependent one-dimensional analyses indicate that the Faraday channels with fixed load resistance are smooth without growth of fluctuation. The diagonal channels with fixed electrode current are smooth with no fluctuation, though the linear theory indicates that the u + a wave is unstable. The diagonal channel with fixed load current suffers large disturbance along the latter half of the channel, being consistent with the linearized analysis which indicates that the u - a and u waves are unstable. [ABSTRACT FROM AUTHOR]

The authors propose a new power consolidation-inversion-control system for the Faraday MHD generator using the voltage source PWM inverters. The dc output power for each electrodes pair of the MHD generator is at first inverted into three-phase ac power by a voltage source PWM inverter, and then the ac powers are consolidated by transformers. The proposed system does not need such expensive equipment as an ac filter or phase modifier and can independently and simultaneously control the active and reactive powers provided to the electric power system. Numerical simulations of the whole system, including the Faraday MHD generator, the proposed system can stably and steadily transit and control the electric power from the MHD generator to the electric power system. It is also confirmed that the proposed system can be independently and simultaneously control the active and reactive powers and can be used as a fast power controller. [ABSTRACT FROM AUTHOR]