Search

Nasorespiratory obstruction has been purported to influence dentofacial growth adversely. This has sparked considerable debate for decades with a resurgence in interest in 'airway friendly orthodontics' among both general and specialist dental practitioners. This critical review aims to evaluate the current literature relating to two questions: does nasorespiratory obstruction alter dentofacial growth, and does early intervention targeted at alleviating nasorespiratory obstruction improve dentofacial growth? The strength of association between nasorespiratory obstruction, mouth breathing and a long face is weak. The common methodological flaws in research include unblinded and cross-sectional study designs, a lack of adequate controls, inadequate follow-up, subjective assessments and inadequate statistical power. Vertical dentofacial growth has a strong genetic influence, which implies a relatively minor contribution of environmental factors including airway obstruction. The current evidence does not support recommending procedures, such as adenotonsillectomy and maxillary expansion, with the singular aim of negating a hyperdivergent (vertical) dentofacial growth pattern. In light of low-quality evidence, both the World Health Organization guidelines and ethical principles dictate that greater emphasis is placed on avoiding harm and wastage of resources over alternative options. These findings call for quality improvement in undergraduate and postgraduate curricula and continuing professional development for health professionals.

Background: Craniosynostosis is a developmental disorder characterized by the premature fusion of skull sutures, necessitating repetitive, high-risk neurosurgical interventions throughout infancy. This study used protein-releasing Titania nanotubular implant (TNT/Ti) loaded with glypican 3 (GPC3) in the cranial critical-sized defects (CSDs) in Crouzon murine model (Fgfr2c342y/+ knock-in mutation) to address a key challenge of delaying post-operative bone regeneration in craniosynostosis. Materials and methods: A 3 mm wide circular CSD was created in two murine models of Crouzon syndrome: (i) surgical control (CSDs without TNT/Ti or any protein, n=6) and (ii) experimental groups with TNT/Ti loaded with GPC3, further subdivided into the presence or absence of chitosan coating (on nanotubes) (n=12 in each group). The bone volume percentage in CSDs was assessed 90 days post-implantation using micro-computed tomography (micro-CT) and histological analysis. Results: Nano-implants retrieved after 90 days post-operatively depicted well-adhered, hexagonally arranged, and densely packed nanotubes with average diameter of 120±10 nm. The nanotubular architecture was generally well-preserved. Compared with the control bone volume percentage data (without GPC3), GPC3-loaded TNT/Ti without chitosan coating displayed a significantly lower volume percent in cranial CSDs (P

Dentine dysplasia type 1 is a rare and complex dental anomaly. Our aim was to conduct a morphometric assessment of a dentinal dysplasia type 1c (DD1c) caries-free mandibular second molar, extracted due to symptomatic apical periodontitis. Controls consisted of five intact mandibular second molars. Micro-computed tomography analysis showed that the DD1c volume % for enamel, dentine/cementum and pulp chamber fell in the 0.36th, 99.97th and 0.09th percentiles of the control teeth (P < 0.01). It also revealed an extremely complicated root canal system in the DD1c tooth with a varying degree of dentine mineralisation and aberrant dentine deposition in the pulp chamber. A crack extending from the external tooth surface to the pulp chamber was identified as a potential site for microbial invasion. Clinical implications include preventive measures and early intervention in reversible pulpitis. Conclusion: Micro-CT imaging can be useful in establishing post-extraction diagnosis of cracks and phenomic characterisation of tooth anomalies.

The objective of this study was to revisit the topic of compensatory interactions between maxillary anterior teeth during development advanced by Sofaer et al. (1971). We addressed the hypotheses listed by Sofaer and colleagues using data derived from our Australian twin sample to investigate whether final tooth size in permanent maxillary central incisors and canines showed evidence of developmental compensation for adjacent missing or microdont lateral incisors. Such compensation is one factor interacting in the complex system of dental development.A 2D image analysis system was used to measure crown height from the labial view, labiopalatal crown width from the incisal view, and mesiodistal crown width from both the labial (MDl) and incisal (MDi) views of the permanent maxillary central incisors and canines on the dental study model of twins enrolled in a longitudinal study of dental development.Developmental variations of maxillary lateral incisors influence the morphogenesis of the adjacent teeth. For example, individuals with one missing lateral incisor and one lateral incisor of average dimensions, had significantly larger central incisors than the control group for the MDl and MDi dimensions (p 0.05). Of the 7 monozygotic twin pairs, 6 were discordant in maxillary anterior hypodontia and microdontia, and 13 out of 14 dizygotic twin pairs were discordant.This study provides further evidence of developmental interactions in the maxillary anterior region, partially supporting Sofaer and colleagues' hypotheses. These interactions are part of a complex adaptive system involving genetic, epigenetic and environmental factors.

The analysis of dental wear, at both the microscopic and macroscopic scale, is one of the most widely used tools in archeology and anthropology to reconstruct the diet and lifestyle of past human populations. Biomechanical studies have indicated that tooth wear helps to dissipate the mechanical load over the crown surface, thus reducing the risk of tooth fracture. To date, there are only a few studies that have examined functional tooth wear variation in modern humans. Here we propose to study masticatory efficiency through the use of the Occlusal Fingerprint Analysis method, a well-developed digital approach that allows the reconstruction of the occlusal dynamics occurring during mastication. The aim of this study is to provide the first longitudinal quantitative data of molar and premolar macrowear patterns within a functional context. We examined the mixed and permanent dentition of one Australian Aboriginal child (from ages 8 to 17) from Yuendumu, using high-resolution surface scans of dental casts including both upper and lower arches. Our results suggest that the occlusal macrowear patterns of this individual did not significantly change through time. Occlusal contact parameters such as functional area, inclination and direction remain relatively unaltered throughout childhood and adolescence, indicating little change in the masticatory function of this individual. The functional tooth wear pattern in this individual did not change longitudinally indicating the degree of masticatory efficiency has most probably remained unaltered.

Objectives Fibroblast growth factor receptor 2 (FGFR2) C342Y/+ mutation is a known cause of Crouzon syndrome that is characterised by craniosynostosis and midfacial hypoplasia. Our aim was to conduct extensive phenotyping of the maxillary, mandibular and dental morphology associated with this mutation. Materials and methods Morphometric data were obtained from 40 mice, representing two genotypes (Crouzon and wild-type) and two sexes (males and females) (n = 10 in each group). Dental analysis further categorised the first molars into the two jaws (maxillary and mandibular) (n = 20 in each group). Maxillary, mandibular and dental morphology was compared by analysing 23 linear landmark-based dimensions in three-dimensional micro-computed tomography reconstructions. Results Compared with wild-type, Crouzon (FGFR2C342Y/+) maxillae were significantly shorter in maximum height, anterior and posterior lengths and middle width, but larger in posterior width (p Conclusions Our findings of hypoplasia in all three planes in Crouzon maxillae and mandibles, together with the presence of bifid mandibular condyles and expansive bone lesions, may be relevant to maxillofacial surgery and orthodontics. Beyond skeletal effects, the FGFR2C342Y/+ mutation is now implicated in affecting tooth development. This study’s skeletal phenomics data also provides baseline data against which the effect of various treatments can now be assessed.

The development of the dentition is a good model of general development; it has the general characteristics of a complex adaptive system. The developmental variation of hypodontia presents with a reduced number of teeth with several other phenotypic changes. The teeth formed are smaller in size, have different crown and root morphology and are delayed in development. The present study is a component of a multi-centre and multidisciplinary collaborative study to investigate hypodontia from genotype to phenotype. This study uses enhanced 3D-imaging techniques in order to increase the range of parameters of the phenotypic outcome: tooth size and tooth shape. The sample consists of orthodontic patients, 60 with hypodontia (30 males and 30 females), and 60 controls matched for age, sex and ethnicity. The material studied for these measurements are the dental models of each patient; these have been imaged with an Amann Girrbach Ceramill Map400 3D scanner. The 3D images produced were all taken by one operator and viewed on MeshLab. The accuracy of the measurements taken was determined through repeat measurements of the same images, undertaken to determine intra and inter-operator reproducibility. This new system was validated by repeating these measurements using the standard 2D caliper technique. Ten repeat measurements were taken on ten models of the lower and upper premolar inter-cuspal distances. The average intra-operator reproducibility for the inter-cuspal distances when measuring the distance between the buccal and palatal cusp of the maxillary premolar was 0.20 mm; the mandibular premolar was 0.32 mm. The results for inter-operator reproducibility demonstrate an average difference of 0.24 mm for the maxillary premolar and 0.16 mm for the lower premolar. This novel method provides an increased range of measurements with good levels of accuracy. This study will go on to establish the variations on the 3D images between the hypodontia and the control group.

Development of the human facial structures including the jaws and dentition occurs in a process that has the characteristics of a complex adaptive system (CAS) influenced by epigenetic, genetic and environmental factors. Earlier studies have suggested dental arch development to be reduced in size in subjects with hypodontia when compared with controls. Hypodontia is a variation of development and presents with a reduced number of teeth together with several other phenotypic changes. This study uses enhanced 3D imaging techniques to increase the accuracy of the measurements of dental arches. The sample consists of orthodontic patients, 60 with hypodontia (thirty males and thirty females), and 60 controls matched for age, gender and ethnicity. One operator using an Amann Girrbach Ceramill Map400 3D scanner recorded the 3D images from dental models. The 3D images were then viewed on MeshLab and the accuracy of the measurements were determined through repeat measurement of the same images; this was undertaken with intra- and inter-operator reproducibility. Ten repeat measurements were taken on 10 different models. Validation of the new system was undertaken by repeating the measurements using the standard 2D caliper technique. Arch dimension measurements were determined from distance between the left-hand side first molar to the right-hand side first molar. Similar measurements were also made for the inter-canine width. The results for average intra-operator measurements were 0.33 mm for the maxillary arch and 0.40 mm for the mandibular arch. The difference in average inter-operator reproducibility was also measured for inter-molar arch dimensions at 0.31 and 0.23 mm for maxillary and mandibular arches, respectively. This novel method provides an increased range of measurement of similar accuracy to standard techniques. This study will proceed to establish the variations on the 3D images between the hypodontia subjects and the control group.

BACKGROUND Information on fracture biomechanics has implications in materials research and clinical practice. The aim of this study was to analyse the influence of non-carious cervical lesion (NCCL) size, restorative status and direction of occlusal loading on the biomechanical behaviour of mandibular premolars, using finite element analysis (FEA), strain gauge tests and fracture resistance tests. METHODS Ten buccal cusps were loaded on the outer and inner slopes to calculate the strain generated cervically. Data were collected for healthy teeth at baseline and progressively at three lesion depths (0.5 mm, 1.0 mm and 1.5 mm), followed by restoration with resin composite. The magnitude and distribution of von Mises stress and maximum principal stress were simulated at all stages using FEA, and fracture strength was also determined (n = 7 per group). RESULTS There were significant effects of the lesion size and loading directions on stress, strain and fracture resistance (p < 0.05). Fracture resistance values decreased with increase in lesion size, but returned to baseline with restorations. CONCLUSIONS Combined assessment of computer-based and experimental techniques provide an holistic approach to characterize the biomechanical behaviour of teeth with both unrestored and restored NCCLs.

Saethre-Chotzen Syndrome (SCS) is an autosomal dominant syndrome that occurs due to a mutation or deletion of the Twist1 gene at chromosome 7p21. Our aim was to conduct a morphometric analysis of the craniofacial features in the mouse associated with a Twist1Micro-computed imaging was conducted for the skulls of forty skeletally mature mice, equally distributed by sex (male and female) and two genotypes (Twist1Compared with wild-type, the murine model of SCS showed these trends: (1) maxillary-zygomatico-temporal region, significantly shorter length and width posteriorly (p0.05), (2) mandible, significantly reduced height and width (p0.05), and (3) teeth, significantly shorter height, shorter mesio-distal width but longer bucco-lingual width (p0.05). In the murine model of SCS, the key morphological variations included incomplete ossification of the temporal bone and zygomatic arch, twisting and/or incomplete ossification of the palatal process of the maxilla, premaxilla and the ventral nasal concha, as well as bifid coronoid processes.The skeletal and dental alterations in the height, length and width provide a foundation for large-scale phenomics studies, which will improve existing knowledge of the Twist1 signalling cascade. This is relevant given the predicted shift towards minimally invasive molecular medical treatment for craniosynostosis.

Chronic orofacial pain of neuropathic origin can present diagnostic and management dilemmas to dental practitioners and also affect the patient's quality of life. Intracranial aneurysms are a potential cause of stroke, with associated sub‐arachnoid haemorrhage leading to high rates of mortality and morbidity. A patient who had been previously managed for symptoms of temporomandibular joint disorder (TMD) presented with sharp, shooting pain of moderate intensity. It was precipitated by swallowing, and radiated to the right throat, posterior border of the mandible, ear and temporomandibular joint. Clinical and radiological investigations excluded odontogenic pain, TMD and other more common causes of facial pain. Magnetic resonance imaging revealed a 7 mm × 6 mm aneurysm in the right middle cerebral artery which was subsequently surgically clipped. Interestingly the facial pain resolved after this procedure. Compression of the insular region of the brain innervated by the trigeminal, glossopharyngeal and vagus nerves provides a plausible explanation for the pain. This is the first case of facial neuralgia associated with an aneurysm in the middle cerebral artery as far as we are aware, and it emphasizes the importance of a multidisciplinary approach in the diagnosis and management of unusual cases of chronic orofacial pain. Refereed/Peer-reviewed

Oral development is a complex adaptive system influenced by genetic, epigenetic and environmental factors. The dental arch develops from 6 weeks in utero until adult life, forming an accessible record to study general growth and development. Increased tooth size in female dizygotic opposite-sex (DZOS) twins compared with female dizygotic same-sex (DZSS) twins provides evidence for the masculinisation of females gestated with a male co-twin, possibly due to the intrauterine influence of male sex hormones: the “Twin Testosterone Transfer” (TTT) hypothesis. This study aimed to investigate the potential influence of intrauterine male hor mones on dental arch size of female DZOS twins. Serial dental models of the primary and permanent dentitions of 69 female DZOS and DZSS twins were examined. Intercanine width, intermolar width, arch length and arch circumference were measured using a customised 2D image analysis system. Unpaired t-tests showed signifi cant differences for mandibular intercanine width (p = 0.03; effect size = 0.6) and borderline differences for mandibular intermolar width and arch circumference (p = 0.05; effect size = 0.5). No significant differences were found in the permanent dentition. These findings provide support for the TTT hypothesis with some arch dimensions being larger in female DZOS twins. We have developed a model of assessing the effects of intrauterine male hormones on the epigenetic changes that last into postnatal life. Our evidence suggests that this is a moderate effect possibly interacting with numerous other environmental factors that may influence arch size.

Background: Current radiography techniques have limitations in detecting subtle odontogenic anomalies or defects that can lead to dentoalveolar and facial infections. This report examines the application of micro-CT imaging on two extracted teeth to enable detailed visualization of subtle odontogenic defects that had given rise to facial swellings. Methods: Two extracted non-carious mandibular left primary canine teeth (73) associated with odontogenic infections were selected from healthy patients, and an intact contralateral tooth (83) from one of the patients was used as a control. All three teeth were subjected to the three-dimensional micro-CT imaging at a resolution of 20 μm. Results: Tooth 73 from the first case displayed dentine pores (channels) that established communication between the pulp chamber and the exposed dentine surface. In comparison, tooth 73 from the second case had a major longitudinal crack extending from the external enamel surface into the pulp chamber. The control tooth did not display any anomalies or major cracks. Conclusions: The scope of micro-CT imaging can be extended from current in vitro applications to establish post-extraction diagnosis of subtle odontogenic defects, in a manner similar to confirming histopathological diagnoses in extracted teeth. Ongoing technological advancements hold the promise for more widespread translatory applications. Refereed/Peer-reviewed

Scale-sensitive fractal analysis of high-resolution 3-dimensional surface reconstructions of wear patterns has advanced our knowledge in evolutionary biology, and has opened up opportunities for translatory applications in clinical practice. To elucidate the microwear characteristics of attrition and erosion in worn natural teeth, we scanned 50 extracted human teeth using a confocal profiler at a high optical resolution (X–Y, 0.17 µm; Z < 3 nm). Our hypothesis was that microwear complexity would be greater in erosion and that anisotropy would be greater in attrition. The teeth were divided into 4 groups, including 2 wear types (attrition and erosion) and 2 locations (anterior and posterior teeth; n = 12 for each anterior group, n = 13 for each posterior group) for 2 tissue types (enamel and dentine). The raw 3-dimensional data cloud was subjected to a newly developed rigorous standardization technique to reduce interscanner variability as well as to filter anomalous scanning data. Linear mixed effects (regression) analyses conducted separately for the dependent variables, complexity and anisotropy, showed the following effects of the independent variables: significant interactions between wear type and tissue type ( P = 0.0157 and P = 0.0003, respectively) and significant effects of location ( P < 0.0001 and P = 0.0035, respectively). There were significant associations between complexity and anisotropy when the dependent variable was either complexity ( P = 0.0003) or anisotropy ( P = 0.0014). Our findings of greater complexity in erosion and greater anisotropy in attrition confirm our hypothesis. The greatest geometric means were noted in dentine erosion for complexity and dentine attrition for anisotropy. Dentine also exhibited microwear characteristics that were more consistent with wear types than enamel. Overall, our findings could complement macrowear assessment in dental clinical practice and research and could assist in the early detection and management of pathologic tooth wear.

The field of dental phenomics provides many opportunities to elucidate the roles of genetic, epigenetic and environmental factors in craniofacial development. To date, research findings have helped to clarify the pathogenesis of many conditions, aiding diagnosis and clinical management. This paper provides an overview of dental phenomics research in some commonly encountered oral diseases in everyday clinical practice, as well as research relating to craniofacial growth and development. Clinically, advances in cariology and periodontology have led to better diagnostic capabilities and treatment provision. In the study of growth and development, important information regarding the varying clinical presentation and pathogenesis of many disorders is now apparent through the accurate quantification of phenotypes. Improvements in two-dimensional (2D) and three-dimensional (3D) imaging and analytical techniques have allowed for accurate dental phenotyping, and efforts are ongoing to apply these in vitro techniques to the in vivo setting. The field of dental phenomics represents an exciting avenue that links research findings to practical application, and collaboration between researcher and clinicians will help advance the field further.

Advances in molecular biology and nanomedicine based therapies hold promise to obviate the need of multiple surgical interventions (associated with current management) in craniosynostosis by preventing bone re-ossification. One such adjunctive therapy involves application of glypicans 1 and 3 (GPC1 and GPC3) that are BMP inhibitors implicated in downregulating the BMP2 activity in prematurely fusing sutures. Electrochemically anodized Titania nanotube (TNT) arrays have been recognized as a promising localized, long-term drug delivery platform for bone-related therapies. This study presents the application of nanoengineered TNT/Ti implants loaded with recombinant glypicans for craniosynostosis therapy. By using Dual luciferase Reporter assay, we tested the biofunctionality of eluted glypicans from the TNT/Ti implants for BMP2 bioactivity regulation in C2C12 murine myoblast cell line. BMP2 activity was inhibited significantly for up to 15days by the glypicans released from polymer-coated TNT/Ti implants, indicating their potential application in adjunctive craniosynostosis treatment.

The Craniofacial Biology Research Group in the School of Dentistry at The University of Adelaide is entering an exciting new phase of its studies of dental development and oral health in twins and their families. Studies of the teeth and faces of Australian twins have been continuing for nearly 30 years, with three major cohorts of twins recruited over that time, and currently we are working with twins aged 2 years old to adults. Cross-sectional data and records relating to teeth and faces of twins are available for around 300 pairs of teenage twins, as well as longitudinal data for 300 pairs of twins examined at three different stages of development, once with primary teeth, once at the mixed dentition stage, and then again when the permanent teeth had emerged. The third cohort of twins comprises over 600 pairs of twins recruited at around birth, together with other family members. The emphasis in this third group of twins has been to record the timing of emergence of the primary teeth and also to sample saliva and dental plaque to establish the timing of colonization of decay-forming bacteria in the mouth. Analyses have confirmed that genetic factors strongly influence variation in timing of primary tooth emergence. The research team is now beginning to carry out clinical examinations of the twins to see whether those who become colonized earlier with decay-forming bacteria develop dental decay at an earlier age. By making comparisons within and between monozygotic (MZ) and dizygotic (DZ) twin pairs and applying modern molecular approaches, we are now teasing out how genetic, epigenetic, and environmental factors interact to influence dental development and also oral health.

The increasing prevalence of gastroesophageal reflux disease (GERD) in children and adults, and of “silent refluxers” in particular, increases the responsibility of dentists to be alert to this potentially severe condition when observing unexplained instances of tooth erosion. Although gastroesophageal reflux is a normal physiologic occurrence, excessive gastric and duodenal regurgitation combined with a decrease in normal protective mechanisms, including an adequate production of saliva, may result in many esophageal and extraesophageal adverse conditions. Sleep-related GERD is particularly insidious as the supine position enhances the proximal migration of gastric contents, and normal saliva production is much reduced. Gastric acid will displace saliva easily from tooth surfaces, and proteolytic pepsin will remove protective dental pellicle. Though increasing evidence of associations between GERD and tooth erosion has been shown in both animal and human studies, relatively few clinical studies have been carried out under controlled trial conditions. Suspicion of an endogenous source of acid being associated with observed tooth erosion requires medical referral and management of the patient as the primary method for its prevention and control.

Numerous case-control and other studies involving confirmation of gastroesophageal reflux disease (GERD) by esophageal pH-metry and the assessment of dental erosions have shown significant associations between the two conditions in both adults and children. By contrast, when asked to vote on whether GERD may cause dental erosions, only 42% of physicians strongly agreed that such an association existed in adults, and just 12.5% strongly agreed for children, respectively in two global consensus reports. Part of this divergence between the perceptions of physicians and the findings of research publications may reflect a general lack of oral health education during medical training, and cursory oral examinations being made under less-than-ideal conditions. Adequate salivary secretions are essential for the protection of the teeth and the oropharyngeal and esophageal mucosa. The quantity and quality of the saliva require monitoring as many drugs, including several of the proton pump inhibitors (PPIs), can cause hyposalivation. In addition, PPIs do not always result in adequate acid suppression. Therefore, collaboration between physicians and dentists is strongly advocated to prevent or ameliorate possible adverse oral effects from both endogenous and exogenous acids, and to promote adequate saliva production in patients with GERD.

In addition to its role as a remineralizing agent in preventing dental caries, recent evidence has shown that casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) can protect teeth against erosion. The aim of this study was to determine whether CPP-ACP could reduce enamel wear rates under severe erosive conditions simulating heavy attrition and gastric regurgitation.Enamel specimens were subjected to 10,000 wear cycles at a load of 100 N and pH 1.2 in a tooth wear machine. The machine was stopped every 2 min (160 cycles), and CPP-ACP in the form of a paste was applied for 5 min in experimental group 1. A paste with the same formulation but without CPP-ACP was applied in experimental group 2. No paste was applied in the control group.A linear mixed model analysis indicated that the mean wear rates in experimental group 1 (0.44+/-0.05 mm(3) per 1000 cycles) and in experimental group 2 (0.63+/-0.06 mm(3) per 1000 cycles) were significantly lower than that in the control group (0.92+/-0.11 mm(3) per 1000 cycles) (p0.05). The mean wear rate in experimental group 1 was also lower than that in experimental group 2 (p0.05). Wear facets in experimental groups 1 and 2 were noted to be smoother and more polished than those in the control group.Both remineralizing and lubricating properties of the paste containing CPP-ACP appear to contribute to wear reduction in enamel. These findings may lead to new strategies for the clinical management of tooth wear.

Background: Erosive tooth wear is a growing concern in clinical dentistry. Our aims were to assess the effect of Tooth Mousse (TM) in managing erosive dentine wear in vitro. Methods: Opposing enamel and dentine specimens from 36 third molar teeth were worn under a load of 100 N for 75 000 cycles in electromechanical tooth wear machines. In experiment 1, TM was applied continuously at the wear interface and the mean dentine wear rate was compared with those of specimens subjected to continuous application of hydrochloric acid (HCl, pH 3.0) and deionized water (DW, pH 6.1) as lubricants. In experiment 2, specimens were subjected to TM application every 1600 cycles at both pH 3.0 and 6.1, and the mean dentine wear rates were compared with those of specimens worn with continuous application of HCl and DW lubricants. Results: Dentine wear was reduced significantly with continuous application of TM compared with HCl and DW lubricants. Specimens prepared with continuous TM application displayed smooth wear facets, whereas more pronounced microwear details were observed with HCl and DW lubricants. Conclusions: Both remineralization and lubrication seem to contribute to reduction in dentine wear associated with TM application, although lubrication appears to have a more pronounced effect.

Objective Previous in vitro studies have described the wear characteristics of specimens in which enamel has been opposed to enamel and dentine opposed to dentine. The aim of this study was to assess the characteristics of wear between specimens in which enamel was opposed to dentine at loads simulating attrition and at pH values simulating different erosive environments. It was hypothesized that enamel would wear more slowly than dentine under all conditions. Design Opposing enamel and dentine specimens from 57 human third molar teeth were worn in electromechanical machines with various loads (32, 62 and 100 N) and lubricants (pH 1.2, 3.0 and 6.1). Tooth wear was quantified by measuring reduction in dentine volume over time using a 3D profilometer. Qualitative assessment was also carried out using scanning electron microscopy. Results Dentine wear increased with increasing load, and dentine wear was faster at pH 1.2 than at pH 3.0 or 6.1 for all loads tested. Interestingly, enamel wore more rapidly than dentine at pH 1.2 under all loads. At pH values of 3.0 and 6.1, enamel wear rates were not measurably different from zero and they were less than wear rates for opposing dentine specimens at all loads. Micrographic assessment showed extensive surface destruction of dentine wear facets due to erosion at pH 1.2. Dentine wear facets were smoother at pH 3.0 that at pH 6.1. Conclusions When enamel wears against dentine in an acidic environment enamel will wear more rapidly at very low pH, while under less acid conditions dentine will wear faster than enamel.

Background: The recommendation that Tooth Mousse (TM), an anticariogenic remineralizing agent, is effective for controlling dental erosion in professional wine tasters is not evidence-based. The aim of this in vitro study was to determine the effectiveness of TM in reducing erosion of coronal enamel and radicular dentine/cementum simulating a typical wine judging session. Methods: Enamel and dentine/cementum from buccal halves (experimental sample) and palatal halves (control sample) of human maxillary premolar teeth were subjected to 1500 one-minute exposures (cycles) to white wine (pH = 3.5). TM was applied every 20 cycles to the experimental sample, but not to the control sample. Paired t-tests were used to determine whether there were significant differences in erosion depths between the experimental and control samples. Results: Mean erosion depths were significantly shallower in the experimental sample than the control sample for both enamel (34.4 μm versus 49.2 μm, respectively) (p

Background: Opinions vary about the causes of non-carious cervical lesions (NCCLs). They have been attributed to toothbrush abrasion, acid corrosion (commonly termed dental erosion), and abfraction. The purpose of this study was to examine the microwear details of NCCLs in a collection of extracted human teeth using scanning election microscopy (SEM). Methods: Negative replicas of large NCCLs in 24 extracted human teeth were obtained in polyvinylsiloxane impression material (Light Body Imprint TM II, 3M ESPE) and viewed under SEM. Results: All NCCLs extended from the cemento-enamel junction to the root surface and they displayed a variety of wedgeshaped appearances. There was evidence of both abrasion and corrosion in 18 of the 24 teeth (75.0 per cent), abrasion only in one tooth (4.2 per cent) and corrosion only in five teeth (20.8 per cent). Horizontal furrows with smooth edges and minor scratch marks, characteristic of abrasion and corrosion, were noted in 13 teeth (54.2 per cent). Conclusions: Based on microscopic assessment of a sample of extracted teeth, it appears that abrasion and corrosion are common associated aetiological factors in the formation of NCCLs.

Background: Erosive tooth wear and dentinal hypersensitivity are common problems affecting professional wine tasters.By using nanoscratch testing, the aim of this in vitro study was to assess enamel softening under conditions simulating10 one-minute episodes of wine erosion. Methods: Ten enamel specimens were bathed in artificial saliva for 2 hours before being eroded for 10 episodes, with each episode comprising one minute of wine erosion followed by one minute of remineralization in artificial saliva.Nanoscratches were placed with a spherical tip (20 lm radius) in a nanoindenter under a load of 100 mN at baseline(stage 1), after a one-erosion episode (stage 2) and after 10-erosion episodes (stage 3). Results: There were significant effects of erosion stages on both scratch depth (p < 0.001) and surface roughness(p < 0.001). Post hoc tests showed significant differences in both scratch depths and surface roughness between stages 1and 3 (p < 0.001), and between stages 2 and 3 (p < 0.01). Conclusions: Enamel softening occurs at an early stage of wine tasting, emphasizing the need to implement early preventive strategies in professional wine tasters. Further research elucidating the fundamental mechanisms involved in early stages of erosion has the potential to lead to development of more effective preventive strategies. Refereed/Peer-reviewed

There are basic principles that should be followed for the prevention and control of dental erosion. They rely on diminishing or eliminating the acid challenge, overcoming any hypersensitivity, healing the remaining damaged tooth surface by remineralization and protecting the tooth from any subsequent acid attack. Opinions vary as to how this should be achieved and the plethora of products that are available, each with their specific formulations and different concentrations, often causes confusion among clinicians. Although examples of specific products will be mentioned in this chapter, the emphasis will be on general methods with reference to generic products in order to guide management. Although this chapter focuses only on professionally applied products and oral health education, they should only form part of an overall preventive program that includes home preventive measures for which the patient is responsible. Each management plan needs to follow a preventive philosophy that is tailor-made for the patient.

Following the invention of the first computed tomography (CT) scanner in the early 1970s, many innovations in three-dimensional (3D) diagnostic imaging technology have occurred, leading to a wide range of applications in craniofacial clinical practice and research. Three-dimensional image analysis provides superior and more detailed information compared with conventional plain two-dimensional (2D) radiography, with the added benefit of 3D printing for preoperative treatment planning and regenerative therapy. Current state-of-the-art multidetector CT (MDCT), also known as medical CT, has an important role in the diagnosis and management of craniofacial injuries and pathology. Three-dimensional cone beam CT (CBCT), pioneered in the 1990s, is gaining increasing popularity in dental and craniofacial clinical practice because of its faster image acquisition at a lower radiation dose, but sound guidelines are needed to ensure its optimal clinical use. Recent innovations in micro-computed tomography (micro-CT) have revolutionized craniofacial biology research by enabling higher resolution scanning of teeth beyond the capabilities of MDCT and CBCT, presenting new prospects for translational clinical research. Even after four decades of refinement, CT technology continues to advance and broaden the horizons of craniofacial clinical practice and phenomics research.

A priority research area in minimal intervention dentistry is the characterization of the early stages of dental erosion. The aim of this in vitro study was to assess the effect of short, repetitive erosive challenges to human enamel over 2 min at pH 1.5 and 3.0 under conditions simulating gastric regurgitation.Enamel surfaces were subjected to erosive challenges at pH 1.5 (Group 1, n=10) and pH 3.0 (Group 2, n=9) for periods of 30s (stage 1), 60s (stage 2) and 120 s (stage 3). Quantitative changes were assessed longitudinally by measuring the 3D average surface roughness (Sa) values using 3D confocal microscopy. Qualitative micrographic assessment of surface changes was also conducted by using environmental scanning electron microscopy.Linear mixed model analysis showed significant effects of the pH values (p0.001) and the stages (p0.001) on the observed Sa values. Post hoc tests showed significant increases in the Sa values between baseline and other stages in both groups (p0.01). The mean Sa values also increased significantly from stage 1 to stage 2 in Group 1 (p0.05). Micrographic analysis displayed severely etched enamel rods in Group 1, but only subtle changes in Group 2.The complexity of the enamel surface is influenced by both acid concentration (pH value) and duration of acid exposure during early stages of erosion. Erosion occurring under conditions simulating GORD can be detected in its initial stages, opening up the possibilities of early diagnosis and management of this condition.Erosive tooth wear occurs progressively and insidiously, often creating complex treatment challenges. This emphasizes the need for early diagnosis and management in accordance with minimal intervention philosophy. Our findings provide a foundation for further research that could lead to the development of highly-sensitive clinical diagnostic tools and preventive strategies.

Physiologic changes occur in dental occlusion throughout life, resulting from the interplay between functional demands and reciprocating adaptive responses. These changes have been reported in the anthropological literature and they reflect evolutionary changes in the human stomatognathic system during the Paleolithic, hunter-gatherer period. Specific occlusal changes occur in response to different environments, leading to extensive variation within and between extinct and extant human populations. For example, functional demands can cause occlusal and interproximal tooth wear, resulting in shortening of the dental arch, continual tooth eruption and changes in masticatory patterns. Since the advent of farming through to our current industrialized culture, functional demands on the human masticatory system, and its adaptive responses to these demands, have been reduced considerably. Indeed, it is only occasionally that functional demands are severe enough to lead to obvious pathology in the modern human dentition. In contrast to normal masticatory activity, 'modern-day conditions' such as dental caries, periodontal disease and erosion, can lead to significant changes in dental occlusion that are pathological and need to be treated. The masticatory system is a dynamic, functional unit that displays considerable change over a lifetime. In this concept paper, it is proposed that modern human populations living in industrialized environments display dental occlusions that can be considered to be 'neotenous'; that is, our dentitions tend to reflect an unworn stage of our ancestors that was only seen in infants, juveniles and young adults. Clinicians can draw on both phylogenetic and ontogenetic perspectives of 'functional dental occlusion' to differentiate continual physiological changes occurring over time that require ongoing review, from pathological responses that require intervention.

Corono-radicular grooves (CRGs) are developmental anomalies on maxillary incisor teeth that have both anthropological and clinical significance. Their reported prevalence varies from around 2% in modern Caucasoid populations to 18% in Chinese, although methods of classification have differed between studies. The aim of this study was to determine the frequency of occureence and configuration of these grooves in a large sample of Caucasoid extracted permanent maxillary incisors collected in South Australia during the early 1900s (The Ramsey Smith Collection). A total of 1481 permanent maxillary incisors was examined using a dissecting microscope and classified according to tooth type and side. CRGs were scored according to their location, length, and depth. They were observed in 78 teeth (5.3%), with three teeth displaying two grooves. No significant difference in frequency occurred between central (4.7%) and lateral (5.7%) incisors, nor between right and left sides. Most of the CRGs (51.8%) were located in the mid-palatal region of tooth crowns, originating from the cingukum and terminating on the root surface less than 5.0 mm from the cemento-enamel junction (CEJ). All CRGs were less than 1.0 mm in depth. A higher proportion of CRGs was observed on the distal surface of lateral incisors (28.6%) than central incisors (9.4%). The frequency of occurrence of CRGs recorded in this study was higher than that of some previous reports, although the possibility of sampling bias in collections of exracted teeth needs to be taken into account. The relatively high frequency of CRGs on the distal surface of maxillary lateral incisors has important clinical implications, as plaque accumulation and loss of gingival attachment in this region may lead to severe localized periodontal involvement.

The continuing studies of the teeth and faces of Australian twins and their families in the Craniofacial Biology Research Group in the School of Dentistry at the University of Adelaide began 30 years ago. Three main cohorts of twins have been recruited, enabling various objectives and specific hypotheses to be addressed about the roles of genetic, epigenetic and environmental influences on human dentofacial growth and development, as well as oral health. This paper highlights some key findings arising from these studies, emphasizing those of direct relevance to practising oral health professionals. We also draw on published literature to review the significant developments in relation to the use of precision 2D and 3D imaging equipment, the application of modern molecular techniques, and the development of sophisticated computer software for analysing genetic relationships and comparing complex shapes. Such developments are valuable for current and future work. Apart from the classical or traditional twin model, there are several other twin models that can be used in research to clarify the relative contributions of genetic, epigenetic and environmental contributions to phenotypic variation. The monozygotic (MZ) co-twin model is one particularly valuable method, given that examination of only one pair of MZ twins can provide considerable insights into underlying causes of observed variation. This model can be used in a dental practice environment, with oral health professionals having the opportunity to explore differences in orofacial structures between MZ co-twins who are attending as patients. As researchers have become more aware of the complexities of the interactions between the genome, the epigenome and the environment during development, there is the need to collect more phenotypic data and define new phenotypes that will better characterize variations in growth processes and health status. When coupled with powerful new genetic approaches, including genome-wide association studies and linkage analyses, exciting opportunities are opening up to unravel the causes of problems in craniofacial growth and common oral diseases in human populations.

The aim of this study was to measure the effect of simulating two different loads on maxillary incisors displaying eight morphological types of non-carious cervical lesions, unrestored and restored with an adhesive restoration, by quantifying the stress distributions generated using finite element analysis.Virtual models of maxillary incisors were generated using the CAD software (RhinoCeros). After composing virtual dental and supporting structures with and without non-carious cervical lesions, each model was meshed using a control mesh device (ANSYS Finite Element Analysis Software). All of the virtual models were subjected to two load types, oblique load and vertical load, to simulate occlusal forces of 100 N each. Comparisons were made between simulated teeth with non-carious cervical lesions, with and without composite resin restorations, and a simulated sound tooth. Data summarizing the stress distributions were obtained in MPa using von Mises criteria.Oblique loading on simulated non-carious cervical lesions resulted in greater stress concentration compared with vertical loading, and non-carious cervical lesions with acute angles displayed higher stress concentrations at the depth of the lesion. Restoring the lesions with an adhesive restoration, such as composite resin, appeared to overcome this stress concentration.Restoring NCCLs with adhesive restorative materials, such as a nanohybrid composite resin, appears to recover the biomechanical behaviour similar to sound teeth.

Objective In addition to its role as a remineralizing agent in preventing dental caries, calcium product (CPP–ACP) delivered as a mousse (Tooth Mousse ® , TM) can reduce erosion of enamel and dentine. The aim of this study was to determine whether CPP–ACP could also reduce erosive tooth wear involving toothbrush abrasion. Methods Flat, polished enamel and dentine specimens ( n = 72) were subjected to 10 wear regimes, with each regime involving erosion in 0.3% citric acid (pH 3.2) for 10 min followed by toothbrush abrasion in a slurry of fluoride-free toothpaste and artificial saliva (1:3 ratio by weight) under a load of 2N for 200 cycles. The specimens were immersed in artificial saliva for 2 h between wear regimes. In the experimental group 1, TM (containing CPP–ACP) was applied at the beginning of each wear episode for 5 min whereas TM− (without CPP–ACP) was applied in the experimental group 2. No mousse was applied in the control group. Results TM significantly reduced enamel wear (mean ± S.E., 1.26 ± 0.33 μm in the experimental group 1 vs 3.48 ± 0.43 μm in the control group) and dentine wear (2.16 ± 0.89 μm in the experimental group 1 vs 10.29 ± 1.64 μm in the control group), and dentine wear was significantly less in the experimental group 1 than in the experimental group 2 (5.75 ± 0.98 μm). Conclusion The finding that TM reduced erosive tooth wear involving toothbrush abrasion, probably by remineralizing and lubricating eroded tooth surfaces, may have implications in the management of tooth wear.

Background: Pulp stones are discrete calcified bodies found in the dental pulp. The aims of this study were to calculate the prevalence of pulp stones in young Australian adults using radiographs, and to report any associations between occurrence of pulp stones and sex, tooth type, dental arch, side and dental status. Methods: From 217 undergraduate dental students, comprising 123 males and 94 females aged between 17-35 years, 3296 teeth were examined under 2x magnification on bitewing radiographs. Pulp stones were scored as present or absent, and associations with sex, tooth type, dental arch, side and dental status noted. Results: Pulp stones were found in 100 (46.1 per cent) of the subjects and 333 (10.1 per cent) of the teeth examined. Occurrences were rare in premolars (0.4 per cent) but significantly higher in molars (19.7 per cent). Pulp stones were significantly more common in first molars than in second molars, and in maxillary first molars than in mandibular first molars. Carious and/or restored maxillary right first molars and maxillary left second molars displayed higher prevalences of pulp stones than unrestored and intact molars. Conclusion: Pulp stones may provide useful forensic information when examining dental records to identify deceased persons.