Search

Immunomodulation in the local tissue microenvironment is pivotal for the determination of macrophage phenotypes and regulation of functions necessary for pro-healing effects. Herein, we demonstrate that a lymph node extracellular matrix (LNEM) prepared by the decellularization of lymph node tissues can mimic lymph node microenvironments for immunomodulation in two-dimensional (2D) and three-dimensional (3D) formats. The LNEM exhibits strengthened immunomodulatory effects in comparison to conventional collagen-based platforms. A 3D LNEM hydrogel is more effective than the 2D LNEM coating in inducing M2 macrophage polarization. The 3D LNEM induces macrophage elongation and enhances the M2-type marker expression and the secretion of anti-inflammatory cytokines. Additionally, the phagocytic function of macrophages is improved upon exposure to the intricate 3D LNEM environment. We demonstrate the reduced susceptibility of liver organoids to a hepatotoxic drug when co-cultured with macrophages in a 3D LNEM. This effect could be attributed to the enhanced anti-inflammatory functions and indicates its potential as a drug-testing platform that enables drug responses similar to those observed in vivo. Finally, the implantation of an LNEM hydrogel in a mouse volumetric muscle loss model facilitates the recruitment of host macrophages to the site of injury and enhances macrophage polarization toward the M2 phenotype for tissue healing in vivo. Therefore, 3D immune system-mimicking biomaterials could serve as useful platforms for tissue modeling and regenerative medicine development.

ObjectiveThe mechanisms underlying type 2 diabetes resolution after Roux-en-Y gastric bypass (RYGB) are unclear. We suspected that glucose excretion may occur in the small bowel based on observations in humans. The aim of this study was to evaluate the mechanisms underlying serum glucose excretion in the small intestine and its contribution to glucose homeostasis after bariatric surgery.Design2-Deoxy-2-[18F]-fluoro-D-glucose (FDG) was measured in RYGB-operated or sham-operated obese diabetic rats. Altered glucose metabolism was targeted and RNA sequencing was performed in areas of high or low FDG uptake in the ileum or common limb. Intestinal glucose metabolism and excretion were confirmed using 14C-glucose and FDG. Increased glucose metabolism was evaluated in IEC-18 cells and mouse intestinal organoids. Obese or ob/ob mice were treated with amphiregulin (AREG) to correlate intestinal glycolysis changes with changes in serum glucose homeostasis.ResultsThe AREG/EGFR/mTOR/AKT/GLUT1 signal transduction pathway was activated in areas of increased glycolysis and intestinal glucose excretion in RYGB-operated rats. Intraluminal GLUT1 inhibitor administration offset improved glucose homeostasis in RYGB-operated rats. AREG-induced signal transduction pathway was confirmed using IEC-18 cells and mouse organoids, resulting in a greater capacity for glucose uptake via GLUT1 overexpression and sequestration in apical and basolateral membranes. Systemic and local AREG administration increased GLUT1 expression and small intestinal membrane translocation and prevented hyperglycaemic exacerbation.ConclusionBariatric surgery or AREG administration induces apical and basolateral membrane GLUT1 expression in the small intestinal enterocytes, resulting in increased serum glucose excretion in the gut lumen. Our findings suggest a novel, potentially targetable glucose homeostatic mechanism in the small intestine.

Fibrin gels have been extensively used for three-dimensional cell culture, bleeding control, and molecular and cell therapies because the fibrous networks facilitate biomolecular and cell transport. However, a small window for gelation makes it difficult to handle the gels for desired preparation and transport. Several methods developed to control gelation rates often alter the microstructure, thereby affecting the mechanical response. We hypothesized that a particle designed to discharge thrombin cargos in response to an external stimulus, such as H2O2, would provide control of the gelation rate over a broad range while strengthening the gel. We examined this hypothesis by assembling poly (lactic-co-glycolic acid) (PLGA) particles loaded with thrombin and MnO2 nanosheets that decompose H2O2 to O2 gas. The resulting particles named as catalytic microgelator were mixed with fibrinogen solution or blood containing 0.2mM H2O2. Due to the increased internal pressure, these particles released a 3-fold larger mass of thrombin than PLGA particles loaded only with thrombin. As a consequence, catalytic microgelators increased the gelation time by one order of magnitude and the elastic modulus by a factor of two compared with the fibrin gel formed by directly mixing fibrinogen and thrombin in solution. These catalytic microgelators also served to clot blood, unlike PLGA particles loaded with thrombin. The resulting blood clot was also more rigid than the blood clot formed by thrombin solution. The results of this study would serve as a new paradigm in controlling gelation kinetics of pre-gel solution and mechanical properties of the post-gel matrix.

Challenges in drug development of neurological diseases remain mainly ascribed to the blood–brain barrier (BBB). Despite the valuable contribution of animal models to drug discovery, it remains difficult to conduct mechanistic studies on the barrier function and interactions with drugs at molecular and cellular levels. Here we present a microphysiological platform that recapitulates the key structure and function of the human BBB and enables 3D mapping of nanoparticle distributions in the vascular and perivascular regions. We demonstrate on-chip mimicry of the BBB structure and function by cellular interactions, key gene expressions, low permeability, and 3D astrocytic network with reduced reactive gliosis and polarized aquaporin-4 (AQP4) distribution. Moreover, our model precisely captures 3D nanoparticle distributions at cellular levels and demonstrates the distinct cellular uptakes and BBB penetrations through receptor-mediated transcytosis. Our BBB platform may present a complementary in vitro model to animal models for prescreening drug candidates for the treatment of neurological diseases., Developing an in vitro blood-brain-barrier (BBB) model that reproduces the organ’s complex structure and function is an open challenge. Here the authors present a BBB-on-a-chip that includes endothelial cells, pericytes and a 3D astrocytic network which resembles the morphology and function of astrocytes in the BBB in vivo.

Epiphora is the overflow of tears typically caused by obstruction or occlusion of the nasolacrimal duct. More attention is required to address this global health issue owing to the increase in air pollution. Implantation of a silicone stent is the preferred treatment for epiphora; however, introducing a silicone stent into a narrow duct with complex geometry is challenging as it requires guidance by a sharp metal needle. Additionally, silicone can cause adverse reactions such as biofilm formation and tear flow resistance due to its extreme hydrophobicity. To overcome these problems, in this study we developed a new type of biocompatible shape memory polymer (SMP) stent with elasticity capacity for self-expansion. First, SMPs in the form of x%poly(ε-caprolactone)-co-y%poly(glycidyl methacrylate) (x%PCL-y%PGMA) were synthesized via ring opening polymerization by varying the molar ratio of PCL (x%) and PGMA (y%). Second, the shape memory and mechanical properties were tuned by controlling the crosslinking degree and concentration of x%PCL-y%PGMA solution to produce a test type of SMP stent. Lastly, this 94%PCL-06%PGMA stent exhibited more standout critical functions in a series of in vitro and in vivo experiments such as a cell growth-supporting level of biocompatibility with nasal epithelial cells without significant inflammatory responses, better resistance to biofilm formation, and more efficient capacity to drain tear than the silicone control. Overall, 94%PCL-06%PGMA can be suggested as a superior alternative to the currently used materials for nasolacrimal stents. STATEMENT OF SIGNIFICANCE: Silicone intubation (stenting) has been widely used to treat nasolacrimal duct obstruction, however, it can cause adverse clinical effects such as bacterial infection; presents procedural challenges because of the curved nasolacrimal duct structure; and shows poor drainage efficiency stemming from the highly hydrophobic nature of silicone. In this work, we describe an innovative shape memory polymer (SMP) as a superior alternative to conventional silicone-based materials for nasolacrimal duct intubation. We demonstrate the clear advantages of the SMP over conventional silicone, including a much higher drainage capacity and superior resistance to bacterial infection.

The current paradigm of cancer medicine focuses on patient‐ and/or cancer‐specific treatments, which has led to continuous progress in the development of patient representatives (e.g., organoids) and cancer‐targeting carriers for drug screening. As breakthrough concepts, i) living cancer tissues convey intact profiles of patient‐specific microenvironmental signatures. ii) The growth mechanisms of cancer mass with intense cell‐cell interactions can be harnessed to develop self‐homing nano‐targeting by using cancer cell‐derived nanovesicles (CaNVs). Hence, a tissueoid model of ovarian cancer (OC) is developed by culturing OC patient tissues in a 3D gel chip, whose microchannel networks enable perfusion to maintain tissue viability. A novel model of systemic cancer responses is approached by xenografting OC tissueoids into ischaemic hindlimbs in nude mice. CaNVs are produced to carry general chemotherapeutics or new drugs under pre/clinical studies that target the BRCA mutation or energy metabolism, thereby increasing the test scope. This pioneer study cross‐validates drug responses from the OC clinic, tissueoid, and animal model by demonstrating the alignment of results in drug type‐specific efficiency, BRCA mutation‐dependent drug efficiency, and metabolism inhibition‐based anti‐cancer effects. Hence, this study provides a directional foundation to accelerate the discovery of patient‐specific drugs with CaNV application towards future precision medicine., A microchannel chip enables direct perfusion culture of ovarian cancer tissues from patients. Consequently, drug efficacies are cross‐validated with animal and clinical outcomes towards patient‐specific medicine. Considering spontaneous cancer cell aggregation upon propagation, cancer cell‐derived nanoparticles are produced to program self‐homing to target cancer sites. Loading of metabolic inhibitors to the particles represents a “trojan horse”‐like strategy.

Cell-cell interactions regulate intracellular signaling via reciprocal contacts of cell membranes in tissue regeneration and cancer growth, indicating a critical need of membrane-derived tools in studying these processes. Hence, cell-membrane-derived nanoparticles (CMNPs) are produced using tonsil-derived mesenchymal stem cells (TMSCs) from children owing to their short doubling time. As target cell types, laryngeal cancer cells are compared to bone-marrow-derived MSCs (BMSCs) because of their cartilage damaging and chondrogenic characteristics, respectively. Treating spheroids of these cell types with CMNPs exacerbates interspheroid hypoxia with robust maintenance of the cell-cell interaction signature for 7 days. Both cell types prefer a hypoxic environment, as opposed to blood vessel formation that is absent in cartilage but is required for cancer growth. Hence, angiogenesis is inhibited by displaying the Notch-1 aptamer on CMNPs. Consequently, laryngeal cancer growth is suppressed efficiently in contrast to improved chondroprotection observed in a series of cell and animal experiments using a xenograft mouse model of laryngeal cancer. Altogether, CMNPs execute a two-edged sword function of inducing hypoxic cell-cell packing, followed by suppressing angiogenesis to promote laryngeal cancer death and chondrogenesis simultaneously. This study presents a previously unexplored therapeutic strategy for anti-cancer and chondroprotective treatment using CMNPs.

Background Porphyromonas gingivalis (Pg) is an oral anaerobe which damages teeth and periodontal tissues. Its body infection is known to cause chronic inflammation, thereby inducing an early stage of atherosclerosis through humoral immune actions. Hence, vaccination by immunizing the proteins of P. gingivalis (Pg) post sonication with heating may prevent atherosclerosis. This study aimed to compare the effect of its vaccination with statin, which effectively prevents atherosclerosis by lowering lipids. Methods The vaccine was produced by sonicating P. gingivalis through heating, and a total of 32 male APOE-/-mice (8-week old) were subjected Western diet for 8 weeks, in order to induce atherosclerosis in a physiological manner. Then, the mice were grouped to undergo four treatment conditions (i.e., no treatment, pitavastatin, vaccine, or pitavastatin with vaccine). Vaccination was conducted through nasal immunization and confirmed by a Pg-specific humoral immune reaction. Then, half of the mice in each group were orally injected with P. gingivalis for the next 5 weeks while the other half remained uninfected, generating a total of eight groups (n = 4/group). The mice were sacrificed at 3 weeks after the last injection. After harvesting the aorta, Oil Red O staining of en face was conducted with imaging and image analysis, and plaque formation was quantitatively determined. Results Compared to no treatment, the vaccination through nasal immunization significantly reduced the atherosclerotic plaque sizes in APOE -/- mice under Western diet to the comparable level of statin group. When both vaccine and statin were used, no clear synergistic effect was observed as opposed to expectation. Conclusions This study revealed that nasal immunization of heat shock P. gingivalis has a significant impact on the prevention of arteriosclerosis and acts as a potential comparator of statin.

As a standard approach to treating glaucoma, a silicone tube device is inserted into the eye to drain water and thereby lower the intraocular pressure (IOP). However, the fixed diameter of the tube often results in too much initial water drain. Suture-sheaving of the outer tube wall also leads to random IOP drops over time. In this study, self-expansion of the inner tube diameter was achieved by inserting a shape memory tube into the silicone tube. The difference in controlling small to large IOP drops before and after tube diameter expansion was demonstrated via computational modeling, a flow pumping system, and rabbit experiments.

Significant fat loss is common in silicon implantation with autologous lipofilling, the most popular type of breast surgery. To overcome this, a 3D-printed fat carrier with well-defined 200 μm radial string and spoke structure was developed, followed by an electrospun nanofiber coating on the entire device surface to promote fat adhesion. This device enhanced the mechanical properties comparably to commercial acellular dermal matrix for in vitro adipogenic differentiation of adipose-derived stem cells, implantation compatibility without foreign body responses, and maintenance of healthy lipid droplet structures. These results show the promising potential of this device to facilitate surface-guided lipogenesis in composite breast reconstruction surgery.

To make up for the shortcomings of the suture-based approach and current coupler devices including long suturing time, exhaustive training, additional mechanical setting, and narrow working windows for size and type of diverse vessel types, a new, suture-free microneedle coupler was developed in this study. The needle shape for improved anastomosis performance and the condition for antithrombotic surface immobilization were determined. In particular, the polymer materials help to maintain healthy phenotypes of main vascular cell types. The performance in rabbit and porcine models of end-to-end vascular anastomosis indicate that this device can serve as a potent alternative to the current approaches.

Engineered ovary mimetics enable hormone autocrination and restore ovarian functions with reduction of menopause risks., The regeneration potential of implantable organ model hydrogels is applied to treat a loss of ovarian endocrine function in women experiencing menopause and/or cancer therapy. A rat ovariectomy model is used to harvest autologous ovary cells while subsequently producing a layer-by-layer form of follicle spheroids. Implantation of a microchannel network hydrogel with cell spheroids [vascularized hydrogel with ovarian spheroids (VHOS)] into an ischemic hindlimb of ovariectomized rats significantly aids the recovery of endocrine function with hormone release, leading to full endometrium regeneration. The VHOS implantation effectively suppresses the side effects observed with synthetic hormone treatment (i.e., tissue overgrowth, hyperplasia, cancer progression, deep vein thrombosis) to the normal levels, while effectively preventing the representative aftereffects of menopause (i.e., gaining fatty weight, inducing osteoporosis). These results highlight the unprecedented therapeutic potential of an implantable VHOS against menopause and suggest that it may be used as an alternative approach to standard hormone therapy.

Atherosclerosis development leads to irreversible cascades, highlighting the unmet need for improved methods of early diagnosis and prevention. Disturbed flow formation is one of the earliest atherogenic events, resulting in increased endothelial permeability and subsequent monocyte recruitment. Here, a mesenchymal stem cell (MSC)-derived nanovesicle (NV) that can target disturbed flow sites with the peptide GSPREYTSYMPH (PREY) (PMSC-NVs) is presented which is selected through phage display screening of a hundred million peptides. The PMSC-NVs are effectively produced from human MSCs (hMSCs) using plasmid DNA designed to functionalize the cell membrane with PREY. The potent anti-inflammatory and pro-endothelial recovery effects are confirmed, similar to those of hMSCs, employing mouse and porcine partial carotid artery ligation models as well as a microfluidic disturbed flow model with human carotid artery-derived endothelial cells. This nanoscale platform is expected to contribute to the development of new theragnostic strategies for preventing the progression of atherosclerosis.

Although there are various methods for tracheal reconstruction, such as a simple approximation with suturing and coverage with adjacent soft tissue or muscle, large defects >50% of the tracheal length still present a clinical challenge. Tissue engineering, a recent promising way to possibly resolve this problem, requires a long preparatory period for stem cell seeding on a scaffold and relatively invasive procedures for stem cell harvesting. As an alternative, we used a vascularized myofascial flap for tracheal reconstruction. In four porcine models, the deep inferior epigastric perforator (DIEP) was used in two and the superior epigastric artery perforator (SEAP) in two. Transformation of the surface of the transplanted myofascial flap was analyzed in the airway environment. The flaps failed in the DIEP group due to venous congestion. At 12 weeks postoperatively, none of SEAP group showed any signs of respiratory distress; the inner surface of the implant exhibited stratified squamous epithelium with sparse cilia. In the clinical setting, a patient who underwent a tracheal reconstruction with a vascularized myofascial flap and 2-year follow-up was in good health with no respiratory distress symptoms.

The cytoskeleton provides structure and plays an important role in cellular function such as migration, resisting compression forces, and transport. The cytoskeleton also reacts to physical cues such as fluid shear stress or extracellular matrix remodeling by reorganizing filament associations, most commonly focal adhesions and cell-cell cadherin junctions. These mechanical stimuli can result in genome-level changes, and the physical connection of the cytoskeleton to the nucleus provides an optimal conduit for signal transduction by interfacing with nuclear envelope proteins, called nesprins, within the LINC (linker of the nucleus to the cytoskeleton) complex. Using single-molecule on single nuclei assays, we report that the interactions between the nucleus and the cytoskeleton, thought to be nesprin-cytoskeleton interactions, are highly sensitive to force magnitude and direction depending on whether cells are historically interfaced with the matrix or with cell aggregates. Application of ~10-30 pN forces to these nesprin linkages yielded structural transitions, with a base transition size of 5-6 nm, which are speculated to be associated with partial unfoldings of the spectrin domains of the nesprins and/or structural changes of histones within the nucleus., This research work was funded and supported by NSF DMR BMAT under 1506717 and NIH EB under 019509 (D.A.B. and H.J.S.). H.J.S. was also supported by the Faculty Research Assistance Program of Yonsei University College of Medicine for 2000 (6–2016–0031). U.H.K was supported by the National Research Foundation of Korea (NRF) under MEST-2015M3A9B3028216. This work was also supported, in part, by Singapore-MIT Alliance for Research and Technology – BioSym, NSF under 1330792, and GAANN under P200A090323 (S.K.B and M.J.L).

Vascular disease is a leading cause of death and disability worldwide. Current surgical intervention and treatment options for vascular diseases have exhibited limited long-term success, emphasizing the need to develop advanced treatment paradigms for early detection and more effective treatment of dysfunctional cells in a specific blood vessel lesion. Advances in targeted nanoparticles mediating cargo delivery enables more robust prevention, screening, diagnosis, and treatment of vascular disorders. In particular, nanotheranostics integrates diagnostic imaging and therapeutic function into a single agent, and is an emerging platform towards more effective and localized vascular treatment. This review article highlights recent advances and current challenges associated with the utilization of targeted nanoparticles for real-time diagnosis and treatment of vascular diseases. Given recent developments, nanotheranostics offers great potential to serve as an effective platform for targeted, localized, and personalized vascular treatment.

Stem and progenitor cells that exhibit significant regenerative potential and critical roles in cancer initiation and progression remain difficult to characterize. Cell fates are determined by reciprocal signaling between the cell microenvironment and the nucleus; hence parameters derived from nuclear remodeling are ideal candidates for stem/progenitor cell characterization. Here we applied high-content, single cell analysis of nuclear shape and organization to examine stem and progenitor cells destined to distinct differentiation endpoints, yet undistinguishable by conventional methods. Nuclear descriptors defined through image informatics classified mesenchymal stem cells poised to either adipogenic or osteogenic differentiation, and oligodendrocyte precursors isolated from different regions of the brain and destined to distinct astrocyte subtypes. Nuclear descriptors also revealed early changes in stem cells after chemical oncogenesis, allowing the identification of a class of cancer-mitigating biomaterials. To capture the metrology of nuclear changes, we developed a simple and quantitative "imaging-derived" parsing index, which reflects the dynamic evolution of the high-dimensional space of nuclear organizational features. A comparative analysis of parsing outcomes via either nuclear shape or textural metrics of the nuclear structural protein NuMA indicates the nuclear shape alone is a weak phenotypic predictor. In contrast, variations in the NuMA organization parsed emergent cell phenotypes and discerned emergent stages of stem cell transformation, supporting a prognosticating role for this protein in the outcomes of nuclear functions.

hMSC source-specific behaviors in 3D NO gel represent EC-like differentiation of ADSCs and pericyte-like characteristics of BMSCs., Angiogenesis is stimulated by nitric oxide (NO) production in endothelial cells (ECs). Although proangiogenic actions of human mesenchymal stem cells (hMSCs) have been extensively studied, the mechanistic role of NO in this action remains obscure. Here, we used a gelatin hydrogel that releases NO upon crosslinking by a transglutaminase reaction (“NO gel”). Then, the source-specific behaviors of bone marrow versus adipose tissue-derived hMSCs (BMSCs versus ADSCs) were monitored in the NO gels. NO inhibition resulted in significant decreases in their angiogenic activities. The NO gel induced pericyte-like characteristics in BMSCs in contrast to EC differentiation in ADSCs, as evidenced by tube stabilization versus tube formation, 3D colocalization versus 2D coformation with EC tube networks, pericyte-like wound healing versus EC-like vasculogenesis in gel plugs, and pericyte versus EC marker production. These results provide previously unidentified insights into the effects of NO in regulating hMSC source-specific angiogenic mechanisms and their therapeutic applications.

Angiogenesis induction into damaged sites has long been an unresolved issue. Local treatment with pro-angiogenic molecules has been the most common approach. However, this approach has critical side effects including inflammatory coupling, tumorous vascular activation, and off-target circulation. Here, the concept that a structure can guide desirable biological function is applied to physically engineer three-dimensional channel networks in implant sites, without any therapeutic treatment. Microchannel networks are generated in a gelatin hydrogel to overcome the diffusion limit of nutrients and oxygen three-dimensionally. Hydrogel implantation in mouse and porcine models of hindlimb ischemia rescues severely damaged tissues by the ingrowth of neighboring host vessels with microchannel perfusion. This effect is guided by microchannel size-specific regenerative macrophage polarization with the consequent functional recovery of endothelial cells. Multiple-site implantation reveals hypoxia and neighboring vessels as major causative factors of the beneficial function. This technique may contribute to the development of therapeutics for hypoxia/inflammatory-related diseases., Restoration of blood flow to damaged sites has commonly involved treatment with pro-angiogenic molecules but these have undesired side effects. Here the authors present a microchannel-patterned gelatin hydrogel that is able to rescue mouse and porcine models of hindlimb ischemia.

Background: Repair of DNA double strand break (DSB) is an important mechanism for maintaining genetic stability during a DNA damage event. Although, a growing body of recent evidence suggests that DNA DSBs and related repair mechanisms may be important in ovarian aging and in various cancers, there are few reports in endometriosis. We, therefore, examined expression levels of genes pertaining to DNA DSB repair in patients with endometriosis to assess the potential effects on ovarian reserves. Materials and methods: A total of 69 women undergoing laparoscopic surgery for endometriosis and other benign conditions was included; endometriosis group (n = 38) vs. controls (n = 31). DNA DSBs in endometrial and ovarian tissues of both groups were compared via immunohistochemistry, aimed at γ-H2AX expression. To gauge genotoxin-induced DNA DSBs in endometrial stromal cells, γ-H2AX expression was determined by western blot after H2O2 treatment of cultured endometrial stromal cells (endometriosis group and controls) and Ishikawa cell-line cultures. Endometrial and ovarian tissue levels of BRCA1, BRCA2, Rad51, and ATM (ataxia-telangiectasia mutated) mRNA expression were also compared. Correlations between expression levels of genes of interest and serum anti-mullerian hormone (AMH) levels were assessed as well. Results: Expression of γ-H2AX in immunostained endometrial and ovarian tissue preparations was greater in the endometriosis group, compared with controls. After H2O2 treatment, γ-H2AX expression levels were also significantly greater in cultured stromal cells of the endometriosis group and in the Ishikawa cell line than in controls. Endometrial expression of BRCA1 and Rad51 mRNA proved significantly lower in the endometriosis group (vs. controls), as did ovarian expression of BRCA1 and BRCA2 mRNA. Serum AMH concentration showed a significant correlation with ovarian BRCA1 mRNA expression in women with endometriosis (p = 0.03). Conclusions: In women with endometriosis, expression levels of various genes implicated in DSB repair are decreased and ovarian BRCA1 expression correlates with.

Shape memory materials have been successfully applied to minimally invasive implantation of medical devices. However, organ-movement-specific shape programing at a microscale level has never been demonstrated despite significant unmet needs. As vein-to-artery grafting induces vein dilation and stenosis, a polymeric self-enclosable external support (SES) is designed to wrap the vascular out-wall. Its micropores are programmed to increase sizes and interconnections upon dilation. Vessel dilation promotes venous maturation, but overdilation induces stenosis by disturbed blood flow. Therefore, the unique elastic shape-fixity of SES provides a foundation to enable a stable microscale shape transition by maintaining the vein dilation. The shape transition of micropore architecture upon dilation induces beneficial inflammation, thereby regenerating vasa vasorum and directing smooth muscle cell migration toward adventitia with the consequent muscle reinforcement of veins. This game-changer approach prevents the stenosis of vein-to-artery grafting by rescuing ischemic disorders and promoting arterial properties of veins.

Superparamagnetic iron oxide nanoparticles (SPIONs) are often encapsulated into drug-carrying nano/microsized particles for simultaneous magnetic resonance (MR) imaging and treatment of diseased tissues. Unfortunately, encapsulated SPIONs may have a limited ability to modulate the T(2)-weighted relaxation of water protons, but this insight has not been examined systematically. This study demonstrates that SPIONs immobilized on 200 nm diameter poly(lactic-co-glycolic acid) (PLGA) nanoparticles using Pickering emulsification present 18-fold higher relaxivity than encapsulated SPIONs and 1.5-fold higher relaxivity than free SPIONs. In contrast, the SPIONs immobilized on 10 μm diameter PLGA particles exhibit a minor increase in MR relaxivity. This interesting finding will significantly impact current efforts to synthesize and assemble advanced MR contrast agents.

Live models that resemble surgical conditions of humans are needed for training free-flap harvesting and anastomosis. Animal models for training purposes have been available for years in many surgical fields. We used the female (because they are easy to handle for the procedure) Yorkshire pigs for the head and neck reconstruction by harvesting the deep inferior epigastric artery perforator or the superior epigastric artery perforator flap. The anastomosis site (neck skin defect or tracheal wall defect) was prepared via the dissection of the common carotid artery and the internal jugular vein, in which 3.5× loupe magnification was used for anastomosis as we use on human cases in real life. This procedure demonstrates a new training method using a reliable learning model and provides a detailed anatomy in a live scenario. We focused on the ischemia time, harvesting, vessel anastomosis, and designing the flap to fit the defect site. This model improves tissue handling and with the use of proper instruments can be repeated many times so that the surgeon is fully confident before starting the surgery on humans.

To date, bone tissue regeneration strategies lack an approach that effectively provides an osteogenic and angiogenic environment conducive to bone growth. In the current study, we evaluated the osteogenic and angiogenic response of human mesenchymal stem cells (hMSCs) and green fluorescent protein-expressing human umbilical vein endothelial cells (GFP-HUVECs) cocultured on a self-assembled, peptide amphiphile nanomatrix functionalized with the cell adhesive ligand RGDS (PA-RGDS). Analysis of alkaline phosphatase activity, von Kossa staining, Alizarin Red quantification, and osteogenic gene expression, indicates a significant synergistic effect between the PA-RGDS nanomatrix and coculture that promoted hMSC osteogenesis. In addition, coculturing on PA-RGDS resulted in enhanced HUVEC network formation and upregulated vascular endothelial growth factor gene and protein expression. Though PA-RGDS and coculturing hMSCs with HUVECs were each previously reported to individually enhance hMSC osteogenesis, this study is the first to demonstrate a synergistic promotion of HUVEC angiogenesis and hMSC osteogenesis by integrating coculturing with the PA-RGDS nanomatrix. We believe that using the combination of hMSC/HUVEC coculture and PA-RGDS substrate is an efficient method for promoting osteogenesis and angiogenesis, which has immense potential as an efficacious, engineered platform for bone tissue regeneration.

Stem cells have recently emerged as an important candidate for cell therapy. However, some major limitations still exist such as a small quantity of cell supply, senescence, and insufficient differentiation efficiency. Therefore, there is an unmet need to control stem cell behavior for better clinical performance. Since native microenvironment factors including stem cell niche, genetic factors, and growth factors direct stem cell fate cooperatively, user-specified in vitro settings are required to understand the regulatory roles and effects of each factor, thereby applying the factors for improved cell therapy. Among others, various types of biomaterials and transfection method have been employed as key tools for development of the in vitro settings. This review focuses on the current strategies to improve stemness maintenance, direct differentiation, and reprogramming using biomaterials and genetic factors without any aids from additional biochemicals and growth factors.

Effective treatment of diabetic neuropathy (DN) remains unsolved. We serendipitously observed dramatic relief of pain in several patients with painful DN receiving granulocyte-colony stimulating factor (G-CSF). The aim of this study was to determine if G-CSF could treat DN in an animal model and to ascertain its mechanism of action. In a rodent model of DN, G-CSF dramatically recovered nerve function, retarded histological nerve changes and increased the expression of neurotrophic factors within nerve. A sex-mismatched bone marrow transplantation (BMT) study revealed that G-CSF treatment increased the abundance of bone marrow (BM)-derived cells in nerves damaged by DN. However, we did not observe evidence of transdifferentiation or cell fusion of BM-derived cells. The beneficial effects of G-CSF were dependent on the integrity of BM. In conclusion, G-CSF produced a therapeutic effect in a rodent model of DN, which was attributed, at least in part, to the actions of BM-derived cells.

Peripheral artery disease (PAD) is characterized by vessel occlusion and ischemia in the limbs. Treatment for PAD with surgical interventions has been showing limited success. Moreover, recent clinical trials with treatment of angiogenic growth factors proved ineffective as increased angiogenesis triggered severe inflammation in a proportionally coupled fashion. Hence, the overarching goal of this research was to address this issue by developing a biomaterial system that enables controlled, dual delivery of pro-angiogenic C16 and anti-inflammatory Ac-SDKP peptides in a minimally-invasive way. To achieve the goal, a peptide-loaded injectable microgel system was developed and tested in a mouse model of PAD. When delivered through multiple, low volume injections, the combination of C16 and Ac-SDKP peptides promoted angiogenesis, muscle regeneration, and perfusion recovery, while minimizing detrimental inflammation. Additionally, this peptide combination regulated inflammatory TNF-α pathways independently of MMP-9 mediated pathways of angiogenesis in vitro, suggesting a potential mechanism by which angiogenic and inflammatory responses can be uncoupled in the context of PAD. This study demonstrates a translatable potential of the dual peptide-loaded injectable microgel system for PAD treatment.

The leading cause of synthetic graft failure includes thrombotic occlusion and intimal hyperplasia at the site of vascular anastomosis. Herein, we report a co- immobilization strategy of heparin and potent anti-neointimal drug (Mitogen Activated Protein Kinase II inhibitory peptide; MK2i) by using a tyrosinase-catalyzed oxidative reaction for preventing thrombotic occlusion and neointimal formation of synthetic vascular grafts. The binding of heparin–tyramine polymer (HT) onto the polycarprolactone (PCL) surface enhanced blood compatibility with significantly reduced protein absorption (64.7% decrease) and platelet adhesion (82.2% decrease) compared to bare PCL surface. When loading MK2i, 1) the HT depot surface gained high MK2i- loading efficiency through charge-charge interaction, and 2) this depot platform enabled long-term, controlled release over 4 weeks (92–272 μg/mL of MK2i). The released MK2i showed significant inhibitory effects on VSMC migration through down-regulated phosphorylation of target proteins (HSP27 and CREB) associated with intimal hyperplasia. In addition, it was found that the released MK2i infiltrated into the tissue with a cumulative manner in ex vivo human saphenous vein (HSV) model. This present study demonstrates that enzymatically HT-coated surface modification is an effective strategy to induce long-term MK2i release as well as hemocompatibility, thereby improving anti- neointimal activity of synthetic vascular grafts.

Human bone marrow derived mesenchymal stem cells (hMSCs) hold great promise for regenerative medicine due to their multipotent differentiation capacity and immunomodulatory capabilities. Substantial research has elucidated mechanisms by which extracellular cues regulate hMSC fate decisions, but considerably less work has addressed how material properties can be leveraged to maintain undifferentiated stem cells. Here, we show that synthetic culture substrates designed to exhibit moderate cell-repellency promote high stemness and low oxidative stress—two indicators of naïve, healthy stem cells—in commercial and patient-derived hMSCs. Furthermore, the material-mediated effect on cell behavior can be tuned by altering the molar percentage (mol %) and/or chain length of poly(ethylene glycol) (PEG), the repellant block linked to hydrophobic poly(ε-caprolactone) (PCL) in the copolymer backbone. Nano- and angstrom-scale characterization of the cell-material interface reveals that PEG interrupts the adhesive PCL domains in a chain-length-dependent manner; this prevents hMSCs from forming mature focal adhesions and subsequently promotes cell–cell adhesions that require connexin-43. This study is the first to demonstrate that intrinsic properties of synthetic materials can be tuned to regulate the stemness and redox capacity of hMSCs and provides new insight for designing highly scalable, programmable culture platforms for clinical translation.

The blood-brain barrier (BBB) plays a critical role in brain homeostasis at the cellular and global level. Mimicking the selective permeability and transport properties of the BBB to specific molecules and cells remains a significant challenge towards the development of a physiologically relevant in vitro BBB model. In this study, we developed electrospun poly (e-caprolactone) (PCL) and polyethylene glycol (PEG) copolymer membranes that supported different cellular components of the neurovascular unit including human-derived endothelial cells, pericytes and astrocytes. Comparative analyses of thickness, morphology, biocompatibility and permeability of membranes were also conducted. We found that collagen coated 4%PEG-96%PCL membranes supported the growth of a confluent and tight endothelium confirmed by transendothelial electrical resistance measurements (TEER). Based on fabrication process and reported results, we finally discuss the adoption of these electrospun fiber membranes for in vitro and on-a-chip human BBB models.

Remarkable achievements have been made in the clinical application of mechanical circulatory support and cardiac transplantation for patients with end-stage heart failure. Despite the successes, complications associated with these therapies continue to drive cardiac regenerative research utilizing stem cell based therapies. Multiple stem cell lineages hold clinical promise for cardiac regeneration—mostly through cellular differentiation, cellular fusion, and paracrine signaling mechanisms. Bone marrow-derived endothelial progenitor cells are among the most intriguing and controversial cell types currently being investigated. Formidable barriers exist, however, in finding the ideal cardiac regenerative stem cell, such as identifying specific lineage markers, optimizing in vitro cellular expansion and improving methods of stem cell delivery. Hybrid approaches of cardiac regeneration using stem cell therapies in conjunction with immunomodulation after cardiac transplantation or with mechanical circulatory support produce cutting edge stem cell technologies. This review summarizes the current knowledge and therapeutic applications of stem cells in patients with end-stage heart failure, including stem cell therapy after implantation of mechanical circulatory support and cardiac transplantation. J. Cell. Biochem. 115: 1217–1224, 2014. © 2014 Wiley Periodicals, Inc.

Inserting a graft into vessels with different diameters frequently causes severe damage to the host vessels. Poor flow patency is an unresolved issue in grafts, particularly those with diameters less than 6 mm, because of vessel occlusion caused by disturbed blood flow following fast clotting. Herein, successful patency in the deployment of an ≈2 mm diameter graft into a porcine vessel is reported. A new library of property-tunable shape-memory polymers that prevent vessel damage by expanding the graft diameter circumferentially upon implantation is presented. The polymers undergo seven consecutive cycles of strain energy-preserved shape programming. Moreover, the new graft tube, which features a diffuser shape, minimizes disturbed flow formation and prevents thrombosis because its surface is coated with nitric-oxide-releasing peptides. Improved patency in a porcine vessel for 18 d is demonstrated while occlusive vascular remodeling occurs. These insights will help advance vascular graft design.

Circulating monocytes undergo spontaneous apoptosis when there is no activation stimulus, which is critical to population control for proper host response to implants. As activation and apoptosis of monocytes/macrophages are regulated by cell-cell and cell-matrix interactions, their regulatory mechanism was investigated in this study using polyethylene glycol (PEG)-containing polyurethane films in which PEG-rich and polyester-rich domains were phase separated. Human blood monocyte-derived macrophages (HBMs) preferentially adhered to PEG domains (cell-matrix interaction) due to the low molecular weight (600 g mol⁻¹), resulting in increased HBM density (cell-cell interaction). As both cell-cell and cell-matrix interactions were promoted, HBM apoptosis increased, while their activation as measured by phagocytosis, intracellular reactive oxygen species (ROS) level and matrix metalloproteinase-9 production decreased compared to PEG-free films. When cell seeding density and cell-adhesive gelatin coating on silicone films were controlled, a cooperative role of cell-matrix (adhesion) and cell-cell (density) interactions in inducing HBM apoptosis was observed. Expression of the macrophage adhesion molecule CD11b caused apoptosis in this context, which was mediated by tissue necrosis factor-α signaling but down-regulated by the ROS inhibitor diphenylene iodonium and the anti-inflammatory peptide Ac-SDKP, suggesting a new concept for the design of biomaterials that allows for cell adhesion without excessive inflammatory activation.

Background Mechanical properties and cyto-compatibility of a composite scaffold which possessed negative (−) Poisson’s ratio (NPR) was investigated for effective load transfer from auxetic scaffold to cell. Methods Organic/inorganic composite scaffolds were prepared by mixing hydroxyapatite (HA) to poly(lactide-co-glycolide) (PLGA). To induce NPR in composite scaffold, 3-directional volumetric compression was applied during the scaffold fabrication at adequate temperature(60°C). The pore size of scaffold ranged between 355–400 μm. Results Poisson’s ratios of NPR scaffolds and control scaffolds were −0.07 and 0.16 at 10 % strain. For stable physical stimulating to loaded cells, ceramic/polymer composite scaffold was prepared by incorporating HA in PLGA to increase mechanical strength. Compressive strength of the HA/PLGA composite scaffold (15 wt. % HA to PLGA) was about 21.7 % higher than that of PLGA-only scaffold. The recovery rates of the NPR composite scaffold after applying compression in the dry and wet states were 90 % and 60 %, respectively. Also the composite scaffold was shown to have better hydrophilicity (61.9°) compared to the PLGA-only scaffolds (65.3°). Cell proliferation of osteoblast-like cell line (MG-63) in the composite scaffold was 20 % higher than in PLGA-only scaffold at static compressive stimulation. For dynamic compressive stimulation (15 min cyclic interval), cell proliferation in the composite scaffold was 2 times higher than that of in PLGA-only scaffold. In conclusion, NPR composite (HA/PLGA) scaffold was effective in isotropic compressive load delivery for osteogenic cell proliferation. Conclusion This composite scaffold with stimulation can be used as tissue engineered scaffold and dynamic cell culture system for bone tissue regeneration.

Background Auxetic scaffolds (experimental) was fabricated by using poly(D, L-lactic-co-glycolic acid), 50:50, (PLGA) for effective bone cell proliferation with mechanical stimulation. Methods Negative Poisson’s ratio in scaffold, 3-directional volumetric compression was applied during the scaffold fabrication at adequate temperature (60 °C). The pore size of scaffold ranged between 355 and 400 μm. Results The porous morphology of the prepared auxetic scaffolds had shown partially concave and dent shapes in SEM image as expected. The lowest Poisson’s ratios of experimental group was −0.07 at 60 °C/10 min. Compressive strength of experimental group was shown about 3.12 times higher than control group (conventional scaffold) in dry state at 25 °C. The compressive strengths of both groups were tended to be decreased dramatically in wet state compared to in dry state. However, compressive strengths of experimental group were higher 3.08 times and 1.88 times in EtOH/PBS (25 °C) and EtOH/PBS/DMEM (37 °C) than control group in wet state, respectively. Degradation rate of the scaffolds showed about 16 % weight loss in 5 weeks. In cell attachment test, experimental group showed 1.46 times higher cell proliferation than control group at 1-day with compressive stimulation. In 3-day culture, the experimental group showed 1.32 times higher than control group. However, there was no significant difference in cell proliferation in 5-day cultivation. Conclusion Overall, negative Poisson’s ratio scaffolds with static mechanical stimulation could affect the cell proliferation at initial cultivation time.

Veins used as grafts in heart bypass or as access points in hemodialysis exhibit high failure rates, thereby causing significant morbidity and mortality for patients. Interventional or revisional surgeries required to correct these failures have been met with limited success and exorbitant costs, particularly for the US Centers for Medicare & Medicaid Services. Vein stenosis or occlusion leading to failure is primarily the result of neointimal hyperplasia. Systemic therapies have achieved little long-term success, indicating the need for more localized, sustained, biomaterial-based solutions. Numerous studies have demonstrated the ability of external stents to reduce neointimal hyperplasia. However, successful results from animal models have failed to translate to the clinic thus far, and no external stent is currently approved for use in the US to prevent vein graft or hemodialysis access failures. This review discusses current progress in the field, design considerations, and future perspectives for biomaterial-based external stents. More comparative studies iteratively modulating biomaterial and biomaterial-drug approaches are critical in addressing mechanistic knowledge gaps associated with external stent application to the arteriovenous environment. Addressing these gaps will ultimately lead to more viable solutions that prevent vein graft and hemodialysis access failures.

Recently, the application of nanostructured materials in the field of tissue engineering has garnered attention to mediate treatment and regeneration of bone defects. In this study, poly(l-lactic acid) (PLLA)/gelatin (PG) fibrous scaffolds are fabricated and β-cyclodextrin (βCD) grafted nano-hydroxyapatite (HAp) is coated onto the fibrous scaffold surface via an interaction between βCD and adamantane. Simvastatin (SIM), which is known to promote osteoblast viability and differentiation, is loaded into the remaining βCD. The specimen morphologies are characterized by scanning electron microscopy. The release profile of SIM from the drug loaded scaffold is also evaluated. In vitro proliferation and osteogenic differentiation of human adipose derived stem cells on SIM/HAp coated PG composite scaffolds is characterized by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red S staining), and real time Polymerase chain reaction (PCR). The scaffolds are then implanted into rabbit calvarial defects and analyzed by microcomputed tomography for bone formation after four and eight weeks. These results demonstrate that SIM loaded PLLA/gelatin/HAp-(βCD) scaffolds promote significantly higher ALP activity, mineralization, osteogenic gene expression, and bone regeneration than control scaffolds. This suggests the potential application of this material toward bone tissue engineering.

An estimated 16 million people in the United States have coronary artery disease (CAD), and approximately 325,000 people die annually from cardiac arrest. About two-thirds of unexpected cardiac deaths occur without prior recognition of cardiac disease. A vast majority of these deaths are attributable to the rupture of 'vulnerable atherosclerotic plaques'. Clinically, plaque vulnerability is typically assessed through imaging techniques, and ruptured plaques leading to acute myocardial infarction are treated through angioplasty or stenting. Despite significant advances, it is clear that current imaging methods are insufficiently capable for elucidating plaque composition--which is a key determinant of vulnerability. Further, the exciting improvement in the treatment of CAD afforded by stenting procedures has been buffered by significant undesirable host-implant effects, including restenosis and late thrombosis. Nanotechnology has led to some potential solutions to these problems by yielding constructs that interface with plaque cellular components at an unprecedented size scale. By leveraging the innate ability of macrophages to phagocytose nanoparticles, contrast agents can now be targeted to plaque inflammatory activity. Improvements in nano-patterning procedures have now led to increased ability to regenerate tissue isotropy directly on stents, enabling gradual regeneration of normal, physiologic vascular structures. Advancements in immunoassay technologies promise lower costs for biomarker measurements, and in the near future, may enable the addition of routine blood testing to the clinician's toolbox--decreasing the costs of atherosclerosis-related medical care. These are merely three examples among many stories of how nanotechnology continues to promise advances in the diagnosis and treatment of vulnerable atherosclerotic plaques.

Stem cells are a promising cell source for regenerative medicine due to their differentiation and self-renewal capacities. In the field of regenerative medicine and tissue engineering, a variety of biomedical technologies have been tested to improve proangiogenic activities of stem cells. However, their therapeutic effect is found to be limited in the clinic because of cell loss, senescence, and insufficient therapeutic activities. To address this type of issue, advanced techniques for biomaterial synthesis and fabrication have been approached to mimic proangiogenic microenvironment and to direct proangiogenic activities. This review highlights the types of polymers and design strategies that have been studied to promote proangiogenic activities of stem cells. In particular, scaffolds, hydrogels, and surface topographies, as well as insight into their underlying mechanisms to improve proangiogenic activities are the focuses. The strategy to promote angiogenic activities of hMSCs by controlling substrate repellency is introduced, and the future direction is proposed.

Because of their potential to regenerate tissues and organs, stem cells garner extensive interest worldwide for treating a wide range of degenerative diseases. In numerous efforts, a variety of stem cell formats have been considered for therapeutic purposes to combat such pathologies, one being vascular-related diseases. In particular, the prevalence of peripheral artery disease (PAD) has steadily increased with the growth of the aging population in many first-world countries. Considering this disturbing trend as well as the obesity epidemic and the ballooning population growth in third-world nations, the burden of PAD is expected to increase worldwide to alarming levels in the coming decades. The advent of stem cell treatments could stymie this burden by alleviating the complications and improving upon the less-than-satisfactory outcomes from current standard-of-care surgical/pharmacological interventions for PAD. This chapter reviews the relevant, cutting-edge clinical and animal model research efforts in the field and explores the remaining questions as they pertain to convergence technologies that may provide the potential for stem cells to reverse PAD-induced tissue damage. Harnessing and translating this potential to create more viable and efficacious PAD treatments should be of paramount global and public health concern.

Induced pluripotent stem cells (iPSCs) from patients’ somatic tissues provide a viable source to create autologous cardiomyocytes (CMs) for potential cardiac-related cell therapies. However, a gap between the generation of iPSC-derived cardiomyocytes (iPSC-CMs) and the successful intra-cardiac engraftment of the cells to restore heart function remains to be bridged. Clinical data reporting engraftment of cells within human heart tissue has not been without its challenges, with significant cell loss from the site of delivery due to the physical stress of the cardiac cycle and the hostile inflammatory response within the infarct zone.[1–3] Hydrogels have been proven to support the survival of multiple cell types and have served as a platform for cell transplantation.[4, 5] Yet the use of tissue-adhesive, temperature-sensitive hydrogels to deliver iPSC-derived cardiomyocytes to infarcted heart remains to be explored. Therefore, we developed a polymer hydrogel to encapsulate, deliver, and integrate iPSC-CMs into infarcted myocardium to restore heart function. A temperature-sensitive biodegradable copolymer (polyethylene glycol-co-poly-e-caprolactone (PEG-PCL)) was synthesized [6] and conjugated with a collagen-binding peptide (SYIRIADTNIT). [7] The polymer was soluble in aqueous solutions at room temperature and underwent solution-to-gel transition at 37°C (Fig. 1 a,b).[6] As the peptide-modified polymer had a strong affinity to collagen I in vitro (Fig. 1c), it was expected that it would significantly increase the binding of the hydrogel to an infarcted heart, thus immobilizing iPSC-CMs within the damaged myocardium. Functional, beating cardiomyocytes were derived from patient fibroblast-derived iPSCs using a “Matrigel sandwich” method.[8] Cardiac differentiation was confirmed by fluorescence-activated cell sorting (FACS) and by immunostaining with known cardiac markers cardiac troponin T (cTNT), ryanodine receptor 2 (RYR) and α-actinin (Fig. 1f). The iPSC-CMs encapsulated in the polymer hydrogel at 37°C for two weeks maintained their viability (Fig. 1g) and cardiac phenotype, as evidenced by strong expression of troponin T and Nkx2.5 (Fig. 1h); thus, PEG-PCL does not appear to have obvious toxic effects on iPSC-CMs. Fig. 1 PEG-PCL copolymer was (a) dissolved in PBS at RT and (b) gelled at 37°C within 5 min (Sol-gel transition). Collagen-binding study was performed by adding peptide-modified polymer to collagen-coated surface at 37°C, and unbound polymer ... Engraftment of iPSC-CMs into infarcted myocardium using the peptide-modified hydrogel and its impact on infarcted heart function and structure were assessed with a rat myocardial infarction (MI) model. All animal surgery and animal care were approved by the Institutional Animal Care and Use Committee (IACUC) at Vanderbilt University (protocol: M/12/074). The left anterior descending (LAD) coronary artery of nude rats was ligated to induce MI. At 30 minutes post-MI, iPSC-CMs alone, or modified copolymer solution with or without iPSC-CMs (2–4 million/rat) were injected around the infarct border zone. A negative control group received the LAD ligation and phosphate-buffered saline (PBS) injection without cells or copolymer. At two weeks post-injection, heart dimensions and functional output were assessed by echocardiography. All groups had ventricular dilation and reduced fractional shortening (FS) (Fig. 2). However, rats treated with iPSC-CM-encapsulated copolymer demonstrated significantly less decline in FS (Δ= −6.37±0.49%) compared to other groups (Δ= −12.77±2.04%, −11.44±2.04% and −12.65±1.53% for PBS control, iPSC-CM only, and polymer only groups, respectively (Fig. 2a). p=0.016 vs. PBS, p=0.021 vs. iPSC-CM only, and p=0.005 vs. polymer only). Overall, the iPSC-CM plus polymer group demonstrated 50.1%, 28.2% and 49.6% improvement in LV systolic function over PBS, iPSC-CM only and polymer only groups (Fig. 2b). Moreover, rats treated with iPSC-CM plus polymer demonstrated a trend toward less LV enlargement (Δ= 15.07±3.24%) compared to other groups (Δ=24.44±3.99%, 25.02±2.03% and 23.17±4.51% for PBS control, iPSC-CM only, and polymer only groups, respectively; Fig. 2c) although this reached statistical significance only in comparison to the iPSC-CM group (p=0.032). Overall, iPSC-CM plus polymer group demonstrated 38.3%, 39.8% and 35.0% less LV enlargement over PBS, iPSC-CM only and polymer only groups, suggesting that iPSC-CM encapsulated in polymer curtailed adverse ventricular remodeling better than other treatment modalities. Fig. 2 The effects of hydrogel-encapsulated iPSC-CMs on left ventricle function and remodeling. (a–c) Echocardiography was performed before the ligation of rat LAD coronary arteries (baseline) and again 2 weeks post-delivery (n=5 rats per group). (a, ... Histological examination of the hearts was performed, and the LV anterior free wall thickness was measured using ImageJ and averaged from 3 randomly selected regions in each rat heart. Result demonstrated that, in addition to LV chamber enlargement, the LAD ligation resulted in dramatic thinning and significant fibrosis of the LV anterior free wall at two weeks in control groups (Fig. 2e). In contrast, heart injected with polymer-encapsulated iPSC-CMs had smaller LV chamber, thicker LV free wall and less fibrosis (Fig. 2e). Overall, hearts in the iPSC-CM plus polymer group were significantly thicker than all other groups; the average LV anterior wall thickness of cell plus polymer group was 2.46±0.06mm, compared with 0.48±0.07, 0.35±0.05 and 0.39±0.02mm in PBS, cell only and polymer only groups, respectively (Fig. 2d, p

Significant progress has been made in nanomedicine, primarily in the form of nanoparticles, for theranostic applications to various diseases. A variety of materials, both organic and inorganic, have been used to develop nanoparticles with promise to achieve improved efficacy in medical applications as well as reduced systemic side effects compared to current standard of care medical practices. In particular, this article highlights the recent development and application of nanoparticles for diagnosing and treating nephropathologies.

In regions of the circulation where vessels are straight and unbranched, blood flow is laminar and unidirectional. In contrast, at sites of curvature, branch points, and regions distal to stenoses, blood flow becomes disturbed. Atherosclerosis preferentially develops in these regions of disturbed blood flow. Current therapies for atherosclerosis are systemic and may not sufficiently target these atheroprone regions. In this study, we sought to leverage the alterations on the luminal surface of endothelial cells caused by this atheroprone flow for nanocarrier targeting. In vivo phage display was used to discover unique peptides that selectively bind to atheroprone regions in the mouse partial carotid artery ligation model. The peptide GSPREYTSYMPH (PREY) was found to bind 4.5-fold more avidly to the region of disturbed flow and was used to form targeted liposomes. When administered intravenously, PREY-targeted liposomes preferentially accumulated in endothelial cells in the partially occluded carotid artery and other areas of disturbed flow. Proteomic analysis and immunoblotting indicated that fibronectin and Filamin-A were preferentially bound by PREY nanocarriers in vessels with disturbed flow. In additional experiments, PREY nanocarriers were used therapeutically to deliver the nitric oxide synthase cofactor tetrahydrobiopterin (BH4), which we have previously shown to be deficient in regions of disturbed flow. This intervention increased vascular BH4 and reduced vascular superoxide in the partially ligated artery in wild-type mice and reduced plaque burden in the partially ligated left carotid artery of fat fed atheroprone mice (ApoE(-/-)). Targeting atheroprone sites of the circulation with functionalized nanocarriers provides a promising approach for prevention of early atherosclerotic lesion formation.