Search

DC flashover performance of ice-covered composite insulators with a parallel air gap (CI/PAG) is an important technical consideration when such insulators are used to isolate ground wires for the purpose of DC ice-melting. Tests on tension and suspension types of CI/PAG were thus carried out in the artificial climate chamber to investigate their DC icing flashover performance. The influences of parallel air gap, ice thickness, pollution severity and air pressure on DC negative 50% flashover voltage (U50%) of CI/PAG were investigated. Test results show that the parallel air gap affected both the discharge path and U50%. With increasing ice thickness, U50% declined by up to 52%; this effect was more evident when the breakdown occurred in the air gap. The pollution severity affected U50% only when the flashover happened along insulator surface. With a decrease of atmospheric pressure, U50% decreased. U50% and the ratio of air pressure were in a power function relationship with a positive characteristic exponent which was relevant to the discharge path.

In this study, icing flashover performance tests of typical DC porcelain, glass, and composite insulators are systematically carried out in a multifunction artificial climate chamber. The DC icing flashover voltages of seven typical insulators under various conditions of icing thickness, pollution severity before icing, string length, and atmospheric pressure are obtained. The relationships between icing thickness, salt deposit density as well as atmospheric pressure and the 50% icing flashover voltage are analyzed, and the formulas are obtained by regression method. In addition, the DC icing flashover voltage correction method of typical porcelain, glass, and composite insulator in the coexisting condition of high altitude, contamination, and icing is proposed.

In the current study, a multi-arc predicting model for DC critical flashover voltage of iced and pre-contaminated long insulator strings under low atmospheric pressure is developed. The model is composed of a series of different polarity surface arcs, icicle-icicle air gap arcs, and residual layer resistance. The calculation method of the residual resistance of the ice layer under DC multi-arc condition is established. To validate the model, 7-unit and 15-unit insulator strings were tested in a multi-function artificial climate chamber under the coexistent conditions of low air pressure, pollution, and icing. The test results showed that the values calculated by the model satisfactorily agreed with those experimentally measured, with the errors within the range of 10%, validating the rationality of the model.

In this study, icing flashover performance tests of typical DC porcelain, glass, and composite insulators are systematically carried out in a multifunction artificial climate chamber. The DC icing flashover voltages of seven typical insulators under various conditions of icing thickness, pollution severity before icing, string length, and atmospheric pressure are obtained. The relationships between icing thickness, salt deposit density as well as atmospheric pressure and the 50% icing flashover voltage are analyzed, and the formulas are obtained by regression method. In addition, the DC icing flashover voltage correction method of typical porcelain, glass, and composite insulator in the coexisting condition of high altitude, contamination, and icing is proposed. [ABSTRACT FROM AUTHOR]

In the current study, a multi-arc predicting model for DC critical flashover voltage of iced and pre-contaminated long insulator strings under low atmospheric pressure is developed. The model is composed of a series of different polarity surface arcs, icicle-icicle air gap arcs, and residual layer resistance. The calculation method of the residual resistance of the ice layer under DC multi-arc condition is established. To validate the model, 7-unit and 15-unit insulator strings were tested in a multi-function artificial climate chamber under the coexistent conditions of low air pressure, pollution, and icing. The test results showed that the values calculated by the model satisfactorily agreed with those experimentally measured, with the errors within the range of 10%, validating the rationality of the model. [ABSTRACT FROM AUTHOR]

The electrical performance of outdoor insulators decreases under low air pressure conditions. The ac pollution flashover performance of various types of insulators are investigated in the multifunction artificial climate chamber in the State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University. The field investigation of the ac pollution flashover voltage performance are carried out at three different high altitudes including Wangkun station (altitude of 4484 m), Nachitai station (altitude of 3575 m) along the Qingzang railway and Geermu urban (altitude of 2820 m). The test results indicate that the characteristic exponent n describing the influence degree of air pressure on pollution flashover voltage, which has influence on the pollution flashover voltage of insulators, is variable, and the value of n is related to the pollution, insulator type etc. Under ac voltage, n is 0.45-0.85. The composite insulators are superior in external insulation selection in high altitude and heavy polluted areas. The relative error between the field test results and laboratory test results is less than 8 %, so the research results obtained in the laboratory can be applied to engineering design. [ABSTRACT FROM AUTHOR]

A method is introduced for testing insulators under icing conditions. The method is based on and developed from those described in the standard of IEC60-1, IEC 60507 and IEEE Task Force on Insulator Icing Test Methods, which give instructions to test insulators under pollution. Then, the paper explores the effects of various factors, including ice thickness, pollution severity on the surface of insulators before ice accretion, atmospheric pressure, and shed profiles, on the flashover performance of short samples of two different types of silicone rubber (SIR) composite long rod insulators intended for ultra high voltage (UHV) ac transmission lines. The experiments were carried out in the multi-function artificial climate chamber in the High Voltage and Insulation Technological Laboratory of Chongqing University, China. The experimental results reveal the regularity of the effects of ice thickness, pollution severity and atmospheric pressure on the average flashover voltage of two types of composite insulators. Those can provide reference for the outdoor insulation design for UHV ac transmission lines. [ABSTRACT FROM AUTHOR]