Search

Renewable energy sources (RES) are not limited by geologically accumulated reserves. Their use and consumption will not lead to the inevitable depletion of the Earth's reserves, and they do not pollute the environment. The main motive for the accelerated development of renewable energy in Europe, the United States and many other countries is concern for energy independence and environmental safety. Thus, the EU has adopted a program to achieve the contribution of renewable energy sources to the energy balance by 2020 up to 20%, and by 2040 – up to 40%. Renewable energy is characterized by versatility and diversity. In the list of tasks arising in the implementation of renewable energy (RE) projects (except technological and technical), there are issues of assessing the possibility and efficiency of using RES for energy supply to the regions. At the same time, it should be borne in mind that often the user is interested in comprehensive assessments for various types of energy sources. In specific regions, the most effective can be either the use of hybrid power plants, or the creation of thermal power plants using various types of renewable energy. In connection with the complexity of this problem, as well as the geographic “regionality” of renewable energy, the topic of this article becomes possible and relevant. A heat and power plant is proposed for supplying: electricity, hot water, hot air and heating, in which, together with a wind power generator, a double-circuit solar installation, a heat pump, electricity and heat accumulators are used. This installation allows to reduce the cost of heat energy by reducing material consumption and costs of equipment used, to save fossil fuel; produce electricity and supply the surplus to the state power grid; reduce heat load and environmental pollution., Поновлювані джерела енергії (ПДЕ) не обмежені геологічно накопиченими запасами. Їх використання і споживання не призведе до неминучого вичерпання запасів Землі, і вони не забруднюють навколишнє середовище. Основним мотивом прискореного розвитку відновлюваної енергетики в Європі, США і багатьох інших країнах є турбота про енергетичну незалежність і екологічну безпеку. Так, в странах ЄС прийнято програму досягнення вкладу ПДЕ в енергетичний баланс до 2020 року до 20%, а до 2040 р – до 40%. Відновлювана енергетика характеризується багатогранністю, різноманітністю. У переліку завдань, що виникають при реалізації проектів відновлюваної енергетики (ВЕ) (крім технологічних і технічних), залишаються питання оцінки можливості та ефективності використання ПДЕ для енергозабезпечення регіонів. Одночасно слід враховувати, що найчастіше користувача цікавлять комплексні оцінки з різних видів джерел енергії. У конкретних регіонах найбільш ефективним може стати або використання гібридних енергоустановок, або створення теплоенергетичних установок на різних типах відновлюваної енергії. У зв'язку з комплексністю даної проблеми, а також географічною «регіональністю» відновлюваної енергетики, стає можливим і актуальним тема цієї статті. Пропонується теплоенергетична установка для постачання: електроенергією, гарячою водою, гарячим повітрям і опаленням, в якій спільно з вітроелектрогенератором, двухконтурною сонячною установкою, використовується тепловий насос, акумулятори електроенергії і теплоти. Ця установка дозволяє зменшити собівартість теплової енергії за рахунок зниження матеріаломісткості і витрат на обладнання, економити органічне паливо; виробляти електроенергію і надлишок її віддавати в державну електромережу; зменшити теплове навантаження і забруднення навколишнього середовища.

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

The aim was to improve single-photon emission computed tomography (SPECT) quality for sparsely acquired 111In projections by adding deep learning generated synthetic intermediate projections (SIPs). Method: The recently constructed deep convolutional network for generating synthetic intermediate projections (CUSIP) was used for improving 20 sparsely acquired 111In-octreotide SPECTs. Reconstruction was performed with 120 (120P) or 30 (30P) projections, or 120 projections with 90 SIPs generated from 30 projections (30–120SIP). The SPECT reconstructions were performed with attenuation, scatter and collimator response corrections. Postfiltered 30P reconstructed SPECT was also analyzed. Image quality were quantitatively evaluated with root-mean-square error, peak signal-to-noise ratio and structural similarity index metrics. Result: The 30–120SIP reconstructed SPECT had statistically significant improved image quality parameters compared to 30P reconstructed SPECT with and without post filtering. The images visual appearance was similar to slightly filtered 120P SPECTs. Thereby, substantial acquisition time reduction with SIPs seems possible without image quality degradation.

Background We examined whether a context and process-sensitive ‘intelligent' checklist increases compliance with best practice compared with a paper checklist during intensive care ward rounds. Methods We conducted a single-centre prospective before-and-after mixed-method trial in a 35 bed medical and surgical ICU. Daily ICU ward rounds were observed during two periods of 8 weeks. We compared paper checklists (control) with a dynamic (digital) clinical checklist (DCC, intervention). The primary outcome was compliance with best clinical practice, measured as the percentages of checked items and unchecked critical items. Secondary outcomes included ICU stay and the usability of digital checklists. Data are presented as median (interquartile range). Results Clinical characteristics and severity of critical illness were similar during both control and intervention periods of study. A total of 36 clinicians visited 197 patients during 352 ward rounds using the paper checklist, compared with 211 patients during 366 ward rounds using the DCC. Per ICU round, a median of 100% of items (94.4–100.0) were completed by DCC, compared with 75.1% (66.7–86.4) by paper checklist (P=0.03). No critical items remained unchecked by the DCC, compared with 15.4% (8.3–27.3) by the paper checklist (P=0.01). The DCC was associated with reduced ICU stay (1 day [1–3]), compared with the paper checklist (2 days [1–4]; P=0.05). Usability of the DCC was judged by clinicians to require further improvement. Conclusions A digital checklist improved compliance with best clinical practice, compared with a paper checklist, during ward rounds on a mixed ICU. Clinical trial registration NCT 03599856.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly-m-phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

Detecting vascular endothelial growth factor C (VEGF-C), a kind of tumor biomarker, is of significant clinical importance in evaluating the prognosis of patients with cancer. However, laboratory analyses are usually not suitable for point-of-care testing because they are expensive and time consuming. In response to these challenges, we fabricated an origami paper-based microfluidic electrochemical device. To improve the specificity of VEGF-C detection, nanocomposites, synthesized by new methylene blue (NMB), amino-functional single-walled carbon nanotubes (NH2-SWCNTs), and gold nanoparticles (AuNPs), were used to modify the surface of working electrodes. Results of electrochemical detection showed that the immunosensor had excellent linearity, ranging from 0.01 to 100 ng mL−1 (R2 = 0.988), and the limit of detection was 10 pg mL−1. To confirm the high specificity of the device under real-world conditions, we evaluated the device using clinical serum samples from our hospital. The results demonstrated that the device had an excellent performance and could provide a platform for real-time detection of cancers., Sun, Wang et al. report an origami paper-based immunosensor for the electrochemical detection of the VEGF-C biomarker in blood serum. The immunosensor is made by modifying the surface of working electrodes with new methylene blue, amino-functional single-walled carbon nanotubes, and gold nanoparticles and demonstrates excellent performance with a limit of detection in the range of picograms per milliliter.

The dating of organic findings is a fundamental task for many scientific fields. Radiocarbon dating is currently the most commonly used method. For wood, dendrochronology is another state‐of‐the‐art method. Both methods suffer from systematic restrictions, leading to samples that have not yet been able to be dated. Molecular changes over time are reported for many materials under different preservation conditions. Many of them are intrinsically monotonous. These monotonous molecular decay (MD) patterns can be understood as clocks that start at the time when a given molecule was formed. Factors that influence these clocks include input material composition and preservation conditions. Different wood species, degrees of pyrolysis, and pretreatments lead to different prediction models. Preservation conditions might change the speed of a given clock and lead to different prediction models. Currently published models for predicting the age of wood, paper, and parchment depend on infrared spectroscopy. In contrast to radiocarbon dating, dating via MD does not comprise a single methodology. Some clocks may deliver less precise results than the others. Ultimately, developing a completely different, new dating strategy‐such as MD dating–will help to bring to light a treasure trove of information hidden in the darkness of organic findings., This review focuses on molecular changes over time. Having been discussed since the 1960s, the variety of molecular clocks includes the change in amino acids in the primary structure of a protein over time. Molecular decay (MD) has a mainly monotonous function, a prerequisite to serving as such a clock. In addition, such clocks need a defined starting point and a defined decay function. In contrast to the decay of alpha and beta emitters, MD is influenced by several environmental factors indicated by preservation conditions. The MD method has the potential to be used for different organic materials and different scientific fields.

This paper summarizes the dose to the eye lens of workers of Memorial Sloan Kettering Cancer Center, a high-volume US oncologic and associated diseases facility. The doses presented in this report were collected from personal dosemeter readings using optically stimulated luminescence badges to estimate Hp(3). Doses were collected for 5950 clinical and research workers between January 2012 and December 2017. The median eye lens dose for all monitored workers was 0.23 mSv y−1. Workers performing, or supporting, fluoroscopy procedures received the highest unprotected eye lens dose of all workers with a median eye dose of 10 mSv. The use of leaded glasses by this group reduced the actual doses to the lens. Nurses and technicians involved in positron emission tomography injections received median eye lens dose of 1.2 mSv.

Laser wakefield accelerators commonly produce on-axis, low-divergence, high-energy electron beams. However, a high charge, annular shaped beam can be trapped outside the bubble and accelerated to high energies. Here we present a parametric study on the production of low-energy-spread, ultra-relativistic electron ring beams in a two-stage gas cell. Ring-shaped beams with energies higher than 750 MeV are observed simultaneously with on axis, continuously injected electrons. Often multiple ring shaped beams with different energies are produced and parametric studies to control the generation and properties of these structures were conducted. Particle tracking and particle-in-cell simulations are used to determine properties of these beams and investigate how they are formed and trapped outside the bubble by the wake produced by on-axis injected electrons. These unusual femtosecond duration, high-charge, high-energy, ring electron beams may find use in beam driven plasma wakefield accelerators and radiation sources.

Active control of chirality in the terahertz frequency range is of great importance in many scientific areas, which include research into fundamental optical phenomena, investigation of novel materials, spectroscopy, imaging, wireless communications and chemistry. The lack of efficient, integrated and fast-reconfigurable polarization modulators has hindered, so far, the full exploitation of applications in all the aforementioned fields. Metamaterials are artificial resonant elements possessing unique remarkable properties such as high efficiency and miniaturization capability. The interplay of metallic metamaterial arrays with electrostatically tunable monolayer graphene has been demonstrated to be a valid approach for the realization of a novel class of THz devices. In this work, the realization of active chiral graphene/metamaterial modulator is presented. The versatility of this experimental approach allowed the device integration with broadband sources such as terahertz time domain spectrometers as well as with quantum cascade lasers. A continuous rotation of the polarization plane > 30° has been reported with a reconfiguration speed > 5 MHz. These results pave the way to the integration of fast terahertz polarization modulators in all the applications where these devices are in great demand.

As enzymes in the outer membrane of the mitochondrion, monoamine oxidases (MAOs) can catalyze the oxidative deamination of monoamines in the human body. According to different substrates, MAOs can be divided into MAO-A and MAO-B. The imbalance of the MAO-A is associated with neurological degeneration, while excess MAO-B activity is closely connected with Parkinson's disease (PD) and Alzheimer's disease (AD); therefore, detection of MAOs is of great significance for the diagnosis and treatment of these diseases. This work reports the multiplexed detection of MAO-A and MAO-B using paper-based devices based on chemiluminescence (CL). The detection limits were 5.01 pg/mL for MAO-A and 8.50 pg/mL for MAO-B in human serum. In addition, we used paper-based devices to detect MAOs in human cells and tissue samples and found that the results of paper-based detection and Western blotting (WB) showed the same trend. While only one antibody can be incubated on the same membrane by WB, multiple antibodies incubated on the same paper enabled simultaneous detection of MAO-A and MAO-B by paper-based devices. The paper-based assay could be used for preliminary early screening of clinical samples for MAOs and can be extended as an alternative to WB for multiplexed detection of various proteins in disease cell or tissue samples.

Trapped-flux magnets comprising stacked superconducting tape constitute a promising development to increase the power density of electrical machines, whilst at the same time keeping the complexity required in their construction in manageable levels that allow their use in applications such as aircraft propulsion. However, the conditions in which superconducting stacks operate inside an electrical motor differ quite significantly from the materials characterization experiments commonly developed to model their behaviour. This work presents the results of studying the applicability of these devices as magnetic flux source in the rotor of synchronous machines considering the influence of whole magnetic circuit. Several aspects are assessed, such as flux harmonics, magnetization, losses and demagnetization. Analytical expressions, which provide limited accuracy but allow fast calculations, are used for this purpose. The results illustrate the different trade-offs that arise during the design of a synchronous electric motor using trapped-flux magnets.

Weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction using microwave distillation followed by gas chromatography-mass spectrometry was successfully developed to determine the essential oil components in lavender. The magnetic ionic liquid 1-octyl-3-methylimidazolium tetrachloroferrate was successfully synthesized and used as the optimal extraction solvent. An aliquot of 9 μL of magnetic ionic liquid could be stably suspended on the weighing paper for long time extraction. The increase of the extractant volume resulted in a significantly enhanced in extracting efficiency of the weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction than traditional headspace single-drop microextraction method. In this experiment, the optimal conditions were 1-octyl-3-methylimidazolium tetrachloroferrate as the extraction solvent, extraction time of 12 min, microwave power of 600 W, cyclohexane as back-extractant and sample amount of 30 mg. The developed method was successfully applied to analyze 16 lavender samples from three different harvest years. A total of 39 compounds in lavender were identified and the principal component analysis provided a clear separation between those lavender samples harvested in different years. The results indicated that the proposed weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction is a novel, fast, simple and sensitive microextration technique for the determination of the essential oil components in lavender.

OBJECTIVE: This waiting-list randomized controlled trial examined the effectiveness of a self-management mHealth app in improving fatigue and quality of life (QoL) in cancer patients and survivors.METHODS: Persons with cancer-related fatigue (CRF) were recruited across four English speaking countries, via social media, and randomized into intervention (n = 519) and control (n = 280) groups. Whereas the intervention group received immediate access to the Untire app, the control group received access only after 12-weeks. Primary outcomes fatigue severity and interference, and secondary outcome QoL were assessed at baseline, 4, 8, and 12-weeks. We ran generalized linear mixed models for all outcomes to determine the effects of app access (yes/no), over 12-weeks, following the intention-to-treat principle.RESULTS: Compared with the control group, the intervention group showed significantly larger improvements in fatigue severity (d = 0.40), fatigue interference (d = 0.35), and overall QoL on average (d = 0.32) (P's 56). Effects did not depend on education and cancer status. Reliable change analyses indicated that significantly more people showed full recovery for fatigue in the intervention vs the control group (P's = .02).CONCLUSIONS: The Untire app can be an effective mHealth solution for cancer patients and survivors with moderate to severe CRF.

A laminated paper-based analytical device (LPAD) for histidine detection was fabricated from a chromatography filtration paper and laminate films. Histidine recognition was effected by histidyl-tRNA synthetase (HisRS), and its detection was signaled colorimetrically based on the molybdenum blue reaction. The analytical conditions and detectable concentration range of histidine were examined. The method provided selective quantification from 1 to 100 μM histidine. LPAD fabrication is considerably simple, involving only the craft-cutting of the chromatography filtration paper and laminate film, and is cost-effective.

A sonication of graphite in polysaccharide (pullulan, chitosan and alginate) is one of the viable methods for the preparation of few-layer graphene. However, the effect of these adsorbed polysaccharides on the electrical performance of the produced graphene so far is not yet clear. In order to investigate the present effect of pullulan, chitosan and alginate on the electrical characteristic of resulted graphene, we have produced few-layer graphene using bath sonication of graphite in pullulan, chitosan and alginate medium for the application as electrical conductive ink in strain-sensitive. Data from the TEM reveals the appearance of folded few-layer graphene flakes after sonication for 150 min while the XPS data shows that the chitosan-based graphene possesses the highest carbon-oxygen ratio of 7.2 as compared to that of the pullulan and alginate-based graphene. By subjecting the produced graphene as the ink for paper-based strain sensor, we have discovered that the chitosan-graphene has the best resistivity value (1.66 × 10-3 Ω⋅cm) and demonstrate the highest sensitivity towards strain (GF: 18.6). This result interestingly implies the potential of the reported chitosan-based conductive ink as a strain-sensitive material for future food packaging.

Significance: Two-photon microscopy has become the standard platform for deep-tissue fluorescence imaging. However, the use of point scanning in conventional two-photon microscopy limits the speed of volumetric image acquisition. Aim: To obtain fast and deep volumetric images, we combine two-photon light sheet fluorescence microscopy (2p-LSFM) and axicon imaging that yields an extended depth of field (DOF) in 2p-LSFM. Approach: Axicon imaging is achieved by imposing an axicon lens in the detection part of LSFM. Results: The DOF with axicon imaging is extended more than 20-fold over that of a conventional imaging lens, liberating the synchronized scanning in LSFM. We captured images of dynamic beating hearts and red blood cells in zebrafish larvae at volume acquisition rates up to 30 Hz. Conclusions: We demonstrate the fast three-dimensional imaging capability of 2p-LSFM with axicon imaging by recording the rapid dynamics of physiological processes.

Today, ethyl alcohol is widely used in many industries. Ethanol production processes from any organic matter often involve rectification, which is an energy-intensive process. The constant increase in the cost of energy leads to a significant growth of the cost of production. Reducing the unit energy consumption can solve a range of important issues: first, that of decreasing production cost, and secondly, that of nationwide dependence on external energy suppliers. A detailed analysis of the thermal energy potential of technological flows aimed at solving the problem of reducing energy consumption inspires the development of more energy-efficient solutions for organizing this processes. The search for alternative solutions demonstrates that one of the methods of reducing the unit energy consumption for ethanol production, in particular one that does not require a total restructuring of the production lines, is the method of integration of processes based on pinch analysis. The extraction of these technological flows was carried out on the basis of the regulatory documentation of the hardware-technological scheme of the centralized ethyl alcohol head fraction distillation plant and the energy audit report of that plant, which was carried out at one of the alcohol enterprises of Ukraine. A distillation and a purification column were selected from the centralized ethyl alcohol distillation plant for thermal integration of the existing process. The thermal and material balances of the ethyl alcohol head fraction distillation plant columns were calculated. To maximize the energy potential of the heat flows, the principles of pinch design were applied and a grid diagram of heat exchanger networks was designed. To maximize the recovery of thermal energy, the difference ΔTmin was set to - 3ºC. This led to the need to use energy-efficient heat exchange equipment. A significant reduction in the use of external utilities (by 48% for cold utilitie and by 38% for hot utilitie) for selected heat flows and a short payback period for the project (approximately three months) makes this solution viable., На сьогодні етиловий спирт є речовиною, використання якої поширено у багатьох галузях промисловості. Технологія виробництва етанолу з будь-якої органічної сировини найчастіше включає ректифікацію, яка є енергоємним процесом. Висока ціна енергоносіїв і постійне її зростання призводять до суттєвого збільшення вартості продукції. Зменшення питомих витрат енергії на одиницю продукції може вирішити комплекс питань: по-перше, зменшити собівартість продукції, по-друге, в масштабах держави, полегшити енергозалежність від зовнішніх постачальників енергії. Детальний аналіз енергетичного потенціалу технологічних потоків з метою вирішення задачі зменшення енерговитрат надихає на розробку більш енергоефективних рішень організації цього процесу. Пошук альтернативних рішень демонструє, що одним з методів зменшення питомих витрат енергії на виробництво етанолу, зокрема таким, що не потребує тотальної реконструкції виробництва, є метод інтеграції процесів, що базується на пінч-аналізі. Екстракція даних технологічних потоків була здійснена на основі регламентної документації апаратурно-технологічної схеми установки централізованої розгонки ГФЕС (головної фракції етилового спирту) та звіту з енергоаудиту даної установки, який був здійснений на одному з спиртових підприємств України. Для теплової інтеграції існуючого процесу, було обрано дві колони установки централізованої розгінки етилового спирту :бражну та епюраційну. Були розраховані тепловий та матеріальний баланси цих колон установки ГФЕС. Для максимальної реалізації енергетичного потенціалу технологічних потоків, були використані принципи пінч-проектування та спроектовано сіткову діаграму. Для максимізації рекуперації теплової енергії було задано ΔТmin - 3ºС. Це призвело до необхідності використання енергоефективного теплообмінного обладнання. Суттєве зменшення використання зовнішніх утиліт (холодних на 48% та гарячих – на 38%) для обраних технологічних потоків та невеликий термін окупності проекту (близько трьох місяців) робить доцільним використання такого роду рішення проблеми.

We describe a laser-plasma platform for photon-photon collision experiments to measure fundamental quantum electrodynamic processes such as the linear Breit-Wheeler process with real photons. The platform has been developed using the Gemini laser facility at the Rutherford Appleton Laboratory. A laser wakefield accelerator and a bremsstrahlung convertor are used to generate a collimated beam of photons with energies of hundreds of MeV, that collide with keV x-ray photons generated by a laser heated plasma target. To detect the pairs generated by the photon-photon collisions, a magnetic transport system has been developed which directs the pairs onto scintillation-based and hybrid silicon pixel single particle detectors. We present commissioning results from an experimental campaign using this laser-plasma platform for photon-photon physics, demonstrating successful generation of both photon sources, characterisation of the magnetic transport system and calibration of the single particle detectors, and discuss the feasibility of this platform for the observation of the Breit-Wheeler process. The design of the platform will also serve as the basis for the investigation of strong-field quantum electrodynamic processes such as the nonlinear Breit-Wheeler and the Trident process, or eventually, photon-photon scattering. We describe a laser–plasma platform for photon–photon collision experiments to measure fundamental quantum electrodynamic processes. As an example we describe using this platform to attempt to observe the linear Breit–Wheeler process. The platform has been developed using the Gemini laser facility at the Rutherford Appleton Laboratory. A laser Wakefield accelerator and a bremsstrahlung convertor are used to generate a collimated beam of photons with energies of hundreds of MeV, that collide with keV x-ray photons generated by a laser heated plasma target. To detect the pairs generated by the photon–photon collisions, a magnetic transport system has been developed which directs the pairs onto scintillation-based and hybrid silicon pixel single particle detectors (SPDs). We present commissioning results from an experimental campaign using this laser–plasma platform for photon–photon physics, demonstrating successful generation of both photon sources, characterisation of the magnetic transport system and calibration of the SPDs, and discuss the feasibility of this platform for the observation of the Breit–Wheeler process. The design of the platform will also serve as the basis for the investigation of strong-field quantum electrodynamic processes such as the nonlinear Breit–Wheeler and the Trident process, or eventually, photon–photon scattering.

Significance: High-speed three-dimensional (3D) super-resolution microscopy is a unique tool to investigate various biological phenomena; yet the technology is not broadly adopted due to its high cost and complex system design. Aim: We present a compact, low-cost, and high-speed 3D structured illumination microscopy (SIM) based on a digital micromirror device and binary holography to visualize fast biological events with super-resolution. Approach: The 3D SIM uses a digital micromirror device to generate three laser foci with individually controllable positions, phases, and amplitudes via binary holography at the back aperture of objective lens to form optimal 3D structured patterns. Fifteen raw images are sequentially recorded and processed by the 3D SIM algorithm to reconstruct a super-resolved image. Results: Super-resolution 3D imaging at a speed of 26.7 frames per second is achieved with a lateral and axial resolution of 155 and 487 nm, which corresponds to a 1.65- and 1.63-times resolution enhancement, respectively, comparing with standard deconvolution microscopy. Conclusions: The 3D SIM realizes fast super-resolution imaging with optimal 3D structured illumination, which may find important applications in biophotonics.

Significance: The Cherenkov emission spectrum overlaps with that of ambient room light sources. Choice of room lighting devices dramatically affects the efficient detection of Cherenkov emission during patient treatment. Aim: To determine optimal room light sources allowing Cherenkov emission imaging in normally lit radiotherapy treatment delivery rooms. Approach: A variety of commercial light sources and long-pass (LP) filters were surveyed for spectral band separation from the red to near-infrared Cherenkov light emitted by tissue. Their effects on signal-to-noise ratio (SNR), Cherenkov to background signal ratio, and image artifacts were quantified by imaging irradiated tissue equivalent phantoms with an intensified time-gated CMOS camera. Results: Because Cherenkov emission from tissue lies largely in the near-infrared spectrum, a controlled choice of ambient light that avoids this spectral band is ideal, along with a camera that is maximally sensitive to it. An RGB LED light source produced the best SNR out of all sources that mimic room light temperature. A 675-nm LP filter on the camera input further reduced ambient light detected (optical density > 3), achieving maximal SNR for Cherenkov emission near 40. Reduction of the room light signal reduced artifacts from specular reflection on the tissue surface and also minimized spurious Cherenkov signals from non-tissue features such as bolus. Conclusions: LP filtering during image acquisition for near-infrared light in tandem with narrow band LED illuminated rooms improves image quality, trading off the loss of red wavelengths for better removal of room light in the image. This spectral filtering is also critically important to remove specular reflection in the images and allow for imaging of Cherenkov emission through clear bolus. Beyond time-gated external beam therapy systems, the spectral separation methods can be utilized for background removal for continuous treatment delivery methods including proton pencil beam scanning systems and brachytherapy.

Relativistic quantum systems exhibit unique features not present at lower energies, such as the existence of both particles and antiparticles, and restrictions placed on the system dynamics due to the light cone. In order to understand what impact these relativistic phenomena have on the performance of quantum thermal machines we analyze a quantum Otto engine with a working medium of a relativistic particle in an oscillator potential evolving under Dirac or Klein-Gordon dynamics. We examine both the low-temperature, non-relativistic and high-temperature, relativistic limits of the dynamics and find that the relativistic engine operates with higher work output, but an effectively reduced compression ratio, leading to significantly smaller efficiency than its non-relativistic counterpart. Using the framework of endoreversible thermodynamics we determine the efficiency at maximum power of the relativistic engine, and find it to be equivalent to the Curzon-Ahlborn efficiency., 22 pages, 8 figures

Significance: Complementary absorption and fluorescence contrast could prove useful for a wide range of biomedical applications. However, current absorption-based photoacoustic microscopy systems require the ultrasound transducers to physically touch the samples, thereby increasing contamination and limiting strong optical focusing in reflection mode. Aim: We sought to develop an all-optical system for imaging cells and tissues using the three combined imaging modalities: photoacoustic remote sensing (PARS), epifluorescence, and confocal laser scanning microscopy (CLSM). Approach: A PARS subsystem with ultraviolet excitation was used to obtain label-free absorption-contrast images of nucleic acids in ex vivo tissue samples. Co-integrated epifluorescence and CLSM subsystems were used to verify the 2D and 3D nuclei distribution. Results: Complementary absorption and fluorescence contrast were demonstrated in phantom imaging experiments and subsequent cell and tissue imaging experiments. Lateral and axial resolution of ultraviolet-PARS (UV-PARS) is shown to be 0.39 and 1.6 μm, respectively, with 266-nm light. CLSM lateral and axial resolution was measured as 0.97 and 2.0 μm, respectively. This resolution is sufficient to image individual cell layers with fine optical sectioning. UV-PARS images of cell nuclei are validated in thick tissue using CLSM. Conclusions: Multimodal absorption and fluorescence contrast are obtained with a non-contact all-optical microscopy system for the first time and utilized to obtain images of cells and tissues with subcellular resolution.

Significance: The highest absorption peaks of the main components of bone are in the mid-infrared region, making Er:YAG and CO2 lasers the most efficient lasers for cutting bone. Yet, studies of deep bone ablation in minimally invasive settings are very limited, as finding suitable materials for coupling high-power laser light with low attenuation beyond 2 μm is not trivial. Aim: The first aim of this study was to compare the performance of different optical fibers in terms of transmitting Er:YAG laser light with a 2.94-μm wavelength at high pulse energy close to 1 J. The second aim was to achieve deep bone ablation using the best-performing fiber, as determined by our experiments. Approach: In our study, various optical fibers with low attenuation (λ=2.94 μm) were used to couple the Er:YAG laser. The fibers were made of germanium oxide, sapphire, zirconium fluoride, and hollow-core silica, respectively. We compared the fibers in terms of transmission efficiency, resistance to high Er:YAG laser energy, and bending flexibility. The best-performing fiber was used to achieve deep bone ablation in a minimally invasive setting. To do this, we adapted the optimal settings for free-space deep bone ablation with an Er:YAG laser found in a previous study. Results: Three of the fibers endured energy per pulse as high as 820 mJ at a repetition rate of 10 Hz. The best-performing fiber, made of germanium oxide, provided higher transmission efficiency and greater bending flexibility than the other fibers. With an output energy of 370 mJ per pulse at 10 Hz repetition rate, we reached a cutting depth of 6.82±0.99 mm in sheep bone. Histology image analysis was performed on the bone tissue adjacent to the laser ablation crater; the images did not show any structural damage. Conclusions: The findings suggest that our prototype could be used in future generations of endoscopic devices for minimally invasive laserosteotomy.

Significance: Artificial skin (AS) is widely used in dermatology, pharmacology, and toxicology, and has great potential in transplant medicine, burn wound care, and chronic wound treatment. There is a great demand for high-quality AS product and a non-invasive detection method is highly desirable. Aim: To quantify the constructure parameters (i.e., thickness and surface roughness) of AS samples in the culture cycle and explore the growth regularities using optical coherent tomography (OCT). Approach: An adaptive interface detection algorithm is developed to recognize surface points in each A-scan, offering a rapid method to calculate parameters without constructing OCT B-scan pictures and further achieving realizing real-time quantification of AS thickness and surface roughness. Experiments on standard roughness plates and H&E-staining microscopy were performed as a verification. Results: As applied on the whole cycle of AS culture, our method’s results show that during the air–liquid culture, the surface roughness of the skin first decreases and then exhibits an increase, which implies coincidence with the degree of keratinization under a microscope. And normal and typical abnormal samples can be differentiated by thickness and roughness parameters during the culture cycle. Conclusions: The adaptive interface detection algorithm is suitable for high-sensitivity, fast detection, and quantification of the interface with layered characteristic tissues, and can be used for non-destructive detection of the growth regularity of AS sample thickness and roughness during the culture cycle.

Microfluidic paper-based analytical devices (μPADs) allow user-friendly and portable chemical determinations, although they provide limited applicability due to insufficient sensitivity. Several approaches have been proposed to address poor sensitivity in μPADs, but they frequently require bulky equipment for power and/or read-outs. Universal serial buses (USB) are an attractive alternative to less portable power sources and are currently available in many common electronic devices. Here, USB-powered μPADs (USB μPADs) are proposed as a fusion of both technologies to improve performance without adding instrumental complexity. Two ITP USB μPADs were developed, both powered by a 5 V potential provided through standard USB ports. The first device was fabricated using the origami approach. Its operation was analyzed experimentally and numerically, yielding a two-order-of-magnitude sample focusing in 15 min. The second ITP USB μPAD is a novel design, which was numerically prototyped with the aim of handling larger sample volumes. The reservoirs were moved away from the ITP channel and capillary action was used to drive the sample and electrolytes to the separation zone, predicting 25-fold sample focusing in 10 min. USB μPADs are expected to be adopted by minimally-trained personnel in sensitive areas like resource-limited settings, the point-of-care and in emergencies. Fil: Schaumburg, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina Fil: Kler, Pablo Alejandro. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; Argentina Fil: Carrell, Cody S.. State University of Colorado - Fort Collins; Estados Unidos Fil: Berli, Claudio Luis Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina Fil: Henry, Charles S.. State University of Colorado - Fort Collins; Estados Unidos

Paper-based microfluidic device was designed with wax-printing to combine potentiometric, fluorimetric and colorimetric detection zones. This newly developed trimodal paper chip has been used for on-site determination of ketamine hydrochloride (KET) as a date rape drug in beverages. The device employed polyaniline nano-dispersion as conducting polymer in ion sensing paper electrodes designed to fit USB plug connector. Carbon dots-gold nanoparticles and cobalt thiocyanate were used in fluorescence and color detection zones, respectively. Cellular phone's camera facilitated the on-site fluorimetric and color detection. The implemented trimodal detection system exhibited specificity for KET detection in the presence of several other beverage interferences i.e., biogenic amines. This innovative sensor brings together analytical figures of merit for effective KET detection in single aliquot of spiked beverages. The proposed paper-based chip also fulfils WHO criteria for point-of-care devices posing the proposed trimodal paper device as an active part for rapid, on-site drug diagnostics and to be applied further for other similar drugs.

Protein biomarkers often exist as degradation fragments in biological samples, and affinity agents derived using a purified protein may not recognize them, limiting their value for clinical diagnosis. Herein, we present a method to overcome this issue, by selecting aptamers against a degraded form of the toxin B protein, which is a marker for diagnosing toxigenic Clostridium difficile infections. This approach has led to isolation of a DNA aptamer that recognizes degraded toxin B, fresh toxin B, and toxin B spiked into human stool samples. DNA aptamers selected using intact recombinant toxin B failed to recognize degraded toxin B, which is the form present in stored stool samples. Using this new aptamer, we produced a simple paper-based analytical device for colorimetric detection of toxin B in stool samples, or in the NAP1 strain of Clostridium difficile. The combined aptamer-selection and paper-sensing strategy can expand the practical utility of DNA aptamers in clinical diagnosis.

This paper aims to determine the levels of exposure to neutron and photon radiation among the personnel engaged in cyclotron operation and the personnel engaged in the production of radiopharmaceuticals, with the use of the environmental radiation monitoring system (RMS) installed in the positron emission tomography laboratory. The annual exposures of employees operating the cyclotron measured with the use of the RMS system are: 1.39 ± 0.16 mSv in case of photon radiation and 2.61 ± 0.14 mSv in case of neutron radiation. In the case of employees in the radiopharmaceuticals’ production zone, the annual exposures measured by means of the RMS system are 0.15 ± 0.03 mSv in case of photon radiation and 0.11 ± 0.01 mSv in case of neutron radiation. The exposure levels among the personnel engaged in cyclotron operation and the personnel engaged in the production of radiopharmaceuticals are below the permissible radiation dose limits.

Objective: Meaning-centered group psychotherapy for cancer survivors (MCGP-CS) is an effective intervention to improve personal meaning, psychological well-being, and depressive symptoms until 6 months after the intervention. In this study, the long-term effects of MCGP-CS (i.e., at 1- and 2-year follow-up) on meaning, psychological well-being and posttraumatic growth were assessed, in comparison to supportive group psychotherapy (SGP) and care as usual (CAU). Methods: Cancer survivors (n = 170) were randomized into MCGP-CS, SGP, or CAU. Assessments were scheduled at baseline, 1 week, 3 months, 6 months, 1 year, and 2 years postintervention. Outcome measures were the Personal Meaning Profile, Ryff's Scales of Psychological Well-Being (SPWB), the Posttraumatic Growth Inventory, and their subscales. Linear mixed models (LMM) were used and results were both reported on an intention-to-treat (ITT) basis, as well as for intervention completers only. Results: LMM and post hoc analyses with Bonferroni correction revealed that MCGP-CS participants reported more improvement on positive relations (subscale of SPWB) than CAU participants of 2-year postintervention (ITT analysis, Cohen's d =.82). Completers also reported more personal growth (subscale of SPWB) after MCGP-CS than after SGP 1-year postintervention (Cohen's d =.94). No long-term effects were found on the other outcome measures. Conclusions: In the 2 years after MCGP-CS, the short-term significant effects on personal meaning and most positive effects related to psychological well-being faded. However, MCGP-CS had a long-term positive effect on positive relations with others and on survivors' sense of personal growth. Trial registration: Netherlands Trial Register: NTR3571.

Bruises are often difficult to detect on victims of violence, potentially impacting investigation and prosecution. The purpose of our randomized controlled trial was to measure the effectiveness of an alternate light source (ALS) within visible and long ultraviolet spectrums at improving bruise detection compared to white light over time. We also examined the effects of skin color, age, gender, localized fat, and injury mechanism on bruise detection. Participants included 157 healthy adults with balanced sampling across six skin color categories. Bruises were created under the controlled application of a paintball pellet and dropped weight to one upper and lower arm, respectively. Using a crossover design, both bruises were examined 21 times over 4 weeks. Ten different wavelength (350–535 nm) and filter (yellow, orange, red) combinations were used. Multilevel models were used to analyze 2903 examinations on both upper and lower arms. Results in multivariable models showed after controlling for other covariates 415 and 450 nm using a yellow filter had greater odds of detecting evidence of bruising than white light (Upper Arm: 415 nm: OR = 5.34, 95% CI: 4.35–6.56; 450 nm: OR = 4.08, 95% CI: 3.36–4.96). Under either light source, being female and having more localized fat had increased odds of detecting bruises created by the dropped weight (female: OR = 2.96, 95% CI: 2.37–3.70; fat: OR = 1.21, 95% CI: 1.09–1.34). Our results support ALS as an appropriate tool to enhance concurrent physical assessment of bruises in the presence of known history of injury. Future development and evaluation of clinical practice guidelines for ALS application are needed.

East Coast fever is caused by Theileria parva, and poses serious concerns for dairy farmers owing to massive economic losses. In the current study, we compared three methods (DNA extraction kits, FTA-NaOH and FTA-TENT) of DNA extraction to identify the most economical and reliable method. A survey for T. parva prevalence was conducted in dairy cattle in Mbarara, Uganda. Cytochrome C oxidase subunit I (COI) and T. parva-p104 genes were amplified to compare the methods. FTA-NaOH-based polymerase chain reaction (PCR) yielded the best detection rate for both COI gene and p104 gene. Prevalence of T. parva was 45.0% and 83.3% at animal and farm-level, respectively. FTA-NaOH based-PCR is simple, highly sensitive and cost-effective tool for T. parva diagnosis in resource constrained settings.

Here, we present a new diacetoxy-functionalized UiO-66 metal-organic framework (MOF) for the trace level detection of hydrazine in water. The MOF material (1) was solvothermally prepared by the reaction between ZrOCl2·8H2O and 2,5-diacetoxy-1,4-benzenedicarboxylic acid (H2BDC-(OCOCH3)2). The desolvated material (1') showed a highly selective fluorescent turn-on signal towards hydrazine in water, which can be visualized by the naked eye under a UV lamp. Within 1 min of hydrazine addition, there was 14-fold fluorescence enhancement. The probe can detect hydrazine up to the nanomolar level (detection limit = 78.8 nM) in water. This detection limit is the lowest among MOF-based fluorescent probes for hydrazine. The material was also utilized for the sensing of hydrazine in paper strips and environmental water samples. Hydrazine-selective deprotection of ester groups anchored with the ligand is the principal reason behind the switch-on nature of sensing.

A bio-inspired cellulose paper–poly(amidoxime) composite hydrogel is explored via UV-polymerization. This hydrogel has a highly efficient uranium capture capacity of up to 6.21 mg g−1 for WU/Wdry gel and 12.9 mg g−1 for WU/Wpoly(amidoxime) in seawater for 6 weeks, due to its enhanced hydrophilicity, good hydraulic/ionic conductivity and broad-spectrum antibacterial performance.

This work reports the development of a rapid, simple and inexpensive colorimetric paper-based assay for the detection of the severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper device was prepared with lamination for easy sample handling and coated with the recombinant SARS-CoV-2 nucleocapsid antigen. This assay employed a colorimetric reaction, which is followed by horseradish peroxidase (HRP) conjugated detecting antibody in the presence of the 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The colorimetric readout was evaluated and quantified for specificity and sensitivity. The characterization of this assay includes determining the linear regression curve, the limit of detection (LOD), the repeatability, and testing complex biological samples. We found that the LOD of the assay was 9.00 ng μL-1 (0.112 IU mL-1). The relative standard deviation was approximately 10% for a sample number of n = 3. We believe that our proof-of-concept assay has the potential to be developed for clinical screening of the SARS-CoV-2 humanized antibody as a tool to confirm infected active cases or to confirm SARS-CoV-2 immune cases during the process of vaccine development.

The first part of paper deals with the base information about diagnostics of power transformers. In this part are presented differently insulating methods, for example method of recovery voltage method, method of polarization and depolarization currents and chromatographic analysis.The second part of paper deals use of method of frequency domain spectroscopy for oil power transformers. This method is used in analysis insulating condition of power transformer with system of oil-paper. It was found, that the results of these tests are highly impacted by the operating temperature during the experimental measurement. Moisture and conductivity between insulating paper and oil in an insulating system are highly dependent from temperature.In the other part, the paper presents experimental results of the frequency diagnostic measurement for a real single-phase traction transformer 110/27 kV at different operating temperatures and states (with oil and without).Finally in the last part, the paper presents comparing frequency insulating measurements among several the same single-phase transformers 110/27 kV.

Despite the green energy generation with low cost compared to conventional fuel cells, microbial fuel cells (MFCs) still suffer with anode related constraints including laborious pretreatment and modification process of conventional electrodes, limited bacterial loading capacity, and inferior extracellular electron transfer efficiency. Accordingly, this investigation explores the waste tissue paper derived three dimensional (3D) carbon aerogel (CA) integrated with cerium dioxide (CeO2) nanotubes decorated nitrogen-doped reduced graphene oxide nanosheets (NRGO) as a competent anode to address these technical complements. The direct growth of NRGO and CeO2 over CA in the form of freestanding and binder-free NRGO/CeO2(1:2)/CA alleviates the significant constrains of conventional anode fabrication. The 3D hierarchical architectures of CA with open porous structure provide easy access of bacteria, thus increases the bacterial colonies per unit volume. Furthermore, the hydrogen bonding between the interfacial oxygen atoms of CeO2 and lysine residues of the cytochrome c in bacteria yields excellent extracellular electron transfer efficiency. The electrostatic interaction between the NRGO and bacteria cells improves the bacterial adhesion and biofilm formation, leading to the compact biofilm formation for the improved direct electron transference. With the profits of above, the MFC with NRGO/CeO2(1:2)/CA demonstrates a maximum power output and good lifespan performances. The present exploration facts thus access advanced avenues to converting waste matters of tissue paper, human urine, and wastewater into profitable constituents for the development of efficient and durable power producing systems.

Salmon fish farmers face remarkable problems in fish rearing and handling due to the spread of disease by infectious pancreatic necrosis virus (IPNV). Therefore, we developed a straightforward and sensitive technique to detect IPNV-based on recombinant human apoferritin heavy chain (hAFN-H) protein nanoparticles. In this study, the 24 subunits of the hAFN-H were genetically modified to express 6×His-tag and protein-G at their C-terminal site using Escherichia coli. We thus achieved a two-step signal amplifying strategy that utilizes a recombinant hAFN-H nanoprobe having a protein-G-binding site that targets the Fc region of monoclonal antibodies and a 6×His-tag that actively interacts with the functionalized Ni-NTA derivatives. In this study, we report a considerable advancement in magnetic bead-based detection systems that use Ni-NTA-Atto 550, reliably exhibiting detection limits of 1.02 TCID50/mL (50% tissue culture infective dose). Additionally, we propose a lateral flow chip-based detection method that uses the hAFN-H surface functionalized with 5 nm of the Ni-NTA-nanogold complex as a nanoprobe; the limit of detection towards IPNV was 0.88 TCID50/mL. The detection of IPNV by this recombinant hAFN-H nanoprobe was linear to virus titers in the range of 101-103 TCID50/mL.

Chemiluminescence (CL) immunoassays for simultaneous detection of early acute myocardial infarction (AMI) biomarkers, including copeptin, heart-type fatty acid binding protein (h-FABP), and cardiac troponin I (cTnI), were developed by using Co2+/N-(aminobutyl)-N-(ethylisoluminol) (ABEI) functionalized magnetic carbon composite (Co2+-ABEI-Fe3O4@void@C) as an interface and a three-dimensional microfluidic paper-based device (3D μPAD) as a detection system. For CL immunoassays, Co2+-ABEI-Fe3O4@void@C was assembled with chitosan (CS) and gold nanoparticle-conjugated antibody (Au-Ab) sequentially to form the sensing platform (Co2+-ABEI-Fe3O4@void@C-CS/Au-Ab). In the presence of antigen (Ag), Ag was captured by the sensing interface to form an immunocomplex, leading to an increase in CL intensity due to the catalysis of -COO- existing in Ag. A 3D μPAD with three detection zones for simultaneous detection of copeptin, h-FABP, and cTnI was designed and fabricated to obtain time-resolved CL signals. Three kinds of immunocomplexes formed with copeptin, h-FABP, and cTnI were added to three detection zones of 3D μPAD, respectively. After injecting H2O2, three time-resolved CL signals were generated in one CL detection run by virtue of time-delayed transport of H2O2 to different detection zones. The three time-resolved CL signals were used for the simultaneous determination of copeptin, h-FABP, and cTnI. The detection limit of copeptin, h-FABP, and cTnI was 0.40 pg/mL, 0.32 pg/mL, and 0.50 pg/mL, respectively, which is at least 1 order of magnitude lower than most of the reported immunoassays. The immunoassays could be directly used for the detection of copeptin, h-FABP, and cTnI in human serum samples. The proposed immunoassays are simple, fast, sensitive, and selective, and are of great application potential in early diagnosis and treatment of AMI.

Purpose To study respiratory effects of exposure to soft paper dust exposure, a relationship that is rarely studied. Methods Soft tissue paper mill workers at a Swedish paper mill were investigated using a questionnaire and lung function and atopy screening. Spirometry without bronchodilation was performed with a dry wedge spirometer, and forced vital capacity (FVC) and forced expiratory volume in 1 s (FEV1) were obtained and expressed as percent predicted. Exposure to soft paper dust was assessed from historical stationary and personal measurements of total dust, in addition to historical information about the work, department, and production. The impact of high exposure to soft paper dust (> 5 mg/m3) vs. lower exposure ≤ 5 mg/m3, as well as cumulative exposure, was analyzed using multiple linear regression models. Multivariate models were adjusted for smoking, atopy, gender, and body mass index. Results One hundred ninety-eight current workers (124 male and 74 female) were included. There were significant associations between both cumulative exposure and years of high exposure to soft paper dust and impaired lung function. Each year of high exposure to soft paper dust was associated with a 0.87% decrease in FEV1 [95% confidence interval (CI) − 1.39 to − 0.35] and decreased FVC (− 0.54%, 95% CI − 1.00 to − 0.08) compared to the lower exposed workers. Conclusions The present study shows that occupational exposure to soft paper dust (years exceeding 5 mg/m3 total dust) is associated with lung function impairment and increased prevalence of obstructive lung function impairment.

A newly modified paper-based enzyme-linked immunosorbent assay (P-ELISA) was established by immobilizing more proteins on the paper surface through an atom transfer radical polymerization (ATRP) reaction. In addition, introducing graphene oxide (GO) sheets, Au nanoparticles (AuNps) and two primary antibodies (Ab1s) led to signal amplification and cost reduction. Electronic supplementary material The online version of this article (10.1186/s13065-019-0622-7) contains supplementary material, which is available to authorized users.

In most cases, three-dimensional paper-based microfluidic analytical devices (3D-μPADs) were fabricated manually by stacking or folding methods. For the first time, digital light processing stereolithography (DLP-SLA) 3D printing technology was adopted to automatically make 3D-μPADs. In the fabrication process, a printing pause was set between two layers to allow paper to be placed in the resin tank. The resin on the fresh paper spontaneously bonded to the former cured paper layer during curing, thus realizing the automatic bonding and alignment between different layers of paper and avoiding the human participation and errors as in stacking and folding methods. There was a gap between two vertical aligned flow paths, therefore the liquid did not flow spontaneously from the upper layer to the lower layer. Most of the fluid flow in 3D-μPADs was spontaneous or manually activated, which was not conducive to complex assays that require different regents to be delivered sequentially. Herein, we used an electric field or airflow to trigger the fluid flow and demonstrated the flow controllability by a proof-of-concept colorimetric assay. The limits of detection of glucose and albumin were 0.8 mM and 3.5 μM, respectively, which were sufficient for clinical requirements. Given the characteristic of flow controllability, we believe that the proposed 3D-μPADs have great potential to make paper-based complex assays automated and programmable.

Despite substantial advances in sensing technologies, the development, preparation, and use of self-testing devices is still confined to specialist laboratories and users. Decentralized analytical devices will enormously impact daily lives, enabling people to analyze diverse clinical, environmental, and food samples, evaluate them and make predictions to improve quality of life, particularly in remote, resource-scarce areas. In recent years, paper-based analytical tools have attracted a great deal of attention; the well-known properties of paper, such as abundance, affordability, lightness, and biodegradability, combined with features of printed electrochemical sensors, have enabled the development of sustainable devices that drive (bio)sensors beyond the state of the art. Their blindness toward colored/turbid matrices (i.e., blood, soil), their portability, and the capacity of paper to autonomously filter/purge/react with target species make such devices powerful in establishing point-of-need tools for use by non-specialists. This protocol describes the preparation of a voltammetric phosphate sensor and an amperometric nerve agent biosensor; both platforms produce quantitative measurements with currents in the range of microamperes. These printed strips comprise three electrodes (graphite for working and counter electrodes and silver/silver chloride (Ag/AgCl) for the reference electrode) and nanomodifiers (carbon black and Prussian blue) to improve their performance and specificity. Depending on analytical need, different types of paper (filter, office) and configurations (1D, 2D, 3D) can be adopted. The protocol, based on the use of cost-effective manufacturing techniques such as drop casting (to chemically modify the substrate surface) and wax/screen printing (for creating the channels and electrodes), can be completed in

A paper-based electrochemical immunosensor was developed for the detection of cancer antigen 125 (CA125) by screen-printing technique. The reduced graphene oxide/thionine/gold nanoparticles (rGO/Thi/AuNPs) nanocomposites were compounded and coated onto the working electrode of immunosensor for CA125 antibody (anti-CA125) immobilization and detection signal amplification. The detection principle was based on the fact that the immunocomplex formed by specify binding of CA125 antibody and antigen could reduce the current response of thionine, which was proportional to the corresponding concentration of CA125 antigen. The immunoassay results showed that the linear range of CA125 was from 0.1 U mL-1 to 200 U mL-1 with the limit of detection (LOD) of 0.01 U mL-1 at signal to noise of 3. Quality control serum samples measured by our proposed immunosensor showed acceptable agreement with traditional ELISA method with the relative error less than 8.05%. The immunosensor exhibited good electrochemical performance with high reproducibility, reliability, stability and accuracy. The proposed immunosensor could be used for the determination of CA125 and had the potential for point-of-care testing (POCT) of other tumor marker.

Significance: Quantitative stiffness information can be a powerful aid for tumor or fibrosis diagnosis. Currently, very promising elastography approaches developed for non-contact biomedical imaging are based on transient shear-waves imaging. Transient elastography offers quantitative stiffness information by tracking the propagation of a wave front. The most common method used to compute stiffness from the acquired propagation movie is based on shear-wave time-of-flight calculations. Aim: We introduce an approach to transient shear-wave elastography with spatially coherent sources, able to yield full-field quantitative stiffness maps with reduced artifacts compared to typical artifacts observed in time-of-flight. Approach: A noise-correlation algorithm developed for passive elastography is adapted to spatially coherent narrow or any band sources. This noise-correlation-inspired (NCi) method is employed in parallel with a classic time-of-flight approach. Testing is done on simulation images, experimental validation is conducted with a digital holography setup on controlled homogeneous samples, and full-field quantitative stiffness maps are presented for heterogeneous samples and ex-vivo biological tissues. Results: The NCi approach is first validated on simulations images. Stiffness images processed by the NCi approach on simulated inclusions display significantly less artifacts than with a time-of-flight reconstruction. The adaptability of the NCi algorithm to narrow or any band shear-wave sources was tested successfully. Experimental testing on homogeneous samples demonstrates similar values for both the time-of-flight and the NCi approach. Soft inclusions in agarose sample could be resolved using the NCi method and feasibility on ex-vivo biological tissues is presented. Conclusions: The presented NCi approach was successful in computing quantitative full-field stiffness maps with narrow and broadband source signals on simulation and experimental images from a digital holography setup. Results in heterogeneous media show that the NCi approach could provide stiffness maps with less artifacts than with time-of-flight, demonstrating that a NCi algorithm is a promising approach for shear-wave transient elastography with spatially coherent sources.

Significance: Spatial frequency domain imaging (SFDI) is a wide-field imaging technique that provides quantitative maps of tissue optical properties. We describe a compact SFDI imager that employs a multispectral compound-eye camera. This design enables simultaneous image acquisition at multiple wavelengths. Such a device has potential for application for quantitative evaluation of superficial tissues by nonspecialists in low-resource settings. Aim: The aim of this work was to develop a compact SFDI imager for widefield imaging of in-vivo tissue optical properties and verify its ability to measure optical properties of tissue-simulating phantoms and in a preclinical model of burn wounds. Approach: This compound-eye imager was constructed using a CMOS sensor subdivided into multiple regions, each having a bandpass filter and objective lens. The ability of the instrument to image optical properties was compared with (1) a commercial SFDI imager and (2) a laboratory-based system. Initial validation of ability to accurately characterize optical properties was performed using a tissue-simulating optical phantom. It was then applied to an established murine model of thermal contact burn severity. In-vivo measurements of the optical properties of rat skin were performed before and after the application of burns. Histology was used to verify burn severity. Results: Measurements of the tissue-simulating phantom optical properties made using the compound-eye imager agree with measurements made using the two comparison SFDI devices. For the murine burn model, the burns showed a decrease in the reduced scattering coefficient at all measurement wavelengths compared with preburn measurements at the same locations. This is consistent with previously reported changes in scattering that occur in full-thickness burns. Conclusion: We demonstrate the potential for SFDI to be translated into compact form factor using a compound-eye camera that is capable of obtaining multiple wavelengths channels simultaneously.

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis.

Significance: Gas in scattering media absorption spectroscopy (GASMAS) enables noninvasive gas sensing in the body. It is developing as a tool for diagnosis and monitoring of respiratory conditions in neonates. Phantom models with relevant features to the clinical translation of GASMAS technology are necessary to understand technical challenges and potential applications of this technique. State-of-the-art phantoms designed for this purpose have focused on the optical properties and anthropomorphic geometry of the thorax, contributing to the source–detector placement, design, and optimization. Lung phantom mimicking the alveolar anatomy has not been included in the existent models due to the inherent complexity of the tissue. We present a simplified model that recreates inflated alveoli embedded in lung phantom. Aim: The goal of this study was to build a lung model with air-filled structures mimicking inflated alveoli surrounded by optical phantom with accurate optical properties (μa = 0.50 cm − 1 and μs′=5.4 cm−1) and physiological parameters [37°C and 100% relative humidity (RH)], and to control the air volume within the phantom to demonstrate the feasibility of GASMAS in sensing changes in pulmonary air volume. Approach: The lung model was built using a capillary structure with analogous size to alveolar units. Part of the capillaries were filled with liquid lung optical phantom to recreate scattering and absorption, whereas empty capillaries mimicked air filled alveoli. The capillary array was placed inside a custom-made chamber that maintained pulmonary temperature and RH. The geometry of the chamber permitted the placement of the laser head and detector of a GASMAS bench top system (MicroLab Dual O2 / H2O), to test the changes in volume of the lung model in transmittance geometry. Results: The lung tissue model with air volume range from 6.89 × 10 − 7 m3 to 1.80 × 10 − 3 m3 was built. Two measurement sets, with 10 different capillary configurations each, were arranged to increase or decrease progressively (in steps of 3.93 × 10 − 8 m3) the air volume in the lung model. The respective GASMAS data acquisition was performed for both data sets. The maximum absorption signal was obtained for configurations with the highest number of air-filled capillaries and decreased progressively when the air spaces were replaced by capillaries filled with liquid optical phantom. Further studies are necessary to define the minimum and maximum volume of air that can be measured with GASMAS-based devices for different source–detector geometries. Conclusions: The optical properties and the structure of tissue from the respiratory zone have been modeled using a simplified capillary array immersed in a controlled environment chamber at pulmonary temperature and RH. The feasibility of measuring volume changes with GASMAS technique has been proven, stating a new possible application of GASMAS technology in respiratory treatment and diagnostics.

Significance: Morphological collagen signatures are important for tissue function, particularly in the tumor microenvironment. A single algorithmic framework with quantitative, multiscale morphological collagen feature extraction may further the use of collagen signatures in understanding fundamental tumor progression. Aim: A modification of the 2D wavelet transform modulus maxima (WTMM) anisotropy method was applied to both digitally simulated collagen fibers and second-harmonic-generation imaged collagen fibers of mouse skin to calculate a multiscale anisotropy factor to detect collagen fiber organization. Approach: The modified 2D WTMM anisotropy method was initially validated on synthetic calibration images to establish the robustness and sensitivity of the multiscale fiber organization tool. Upon validation, the algorithm was applied to collagen fiber organization in normal wild-type skin, melanoma stimulated skin, and integrin α10KO skin. Results: Normal wild-type skin collagen fibers have an increased anisotropy factor at all sizes scales. Interestingly, the multiscale anisotropy differences highlight important dissimilarities between collagen fiber organization in normal wild-type skin, melanoma stimulated, and integrin α10KO skin. At small scales (∼2 to 3 μm), the integrin α10KO skin was vastly different than normal skin (p-value ∼ 10 − 8), whereas the melanoma stimulated skin was vastly different than normal at large scales (∼30 to 40 μm, p-value ∼ 10 − 15). Conclusions: This objective computational collagen fiber organization algorithm is sensitive to collagen fiber organization across multiple scales for effective exploration of collagen morphological alterations associated with melanoma and the lack of α10 integrin binding.

Significance: Spectral-domain optical coherence tomography (SD-OCT) offers depth-resolved imaging of optical scattering contrast but is limited in sensitivity to optical absorption. Dual-modality imaging combined with the noncontact absorption contrast of photoacoustic remote sensing (PARS) microscopy can augment SD-OCT applications with specific molecular and functional contrasts in an all-optical, fiber-based platform. Aim: To develop a fiber-based multimodal PARS and SD-OCT imaging system, which efficiently uses a common 1050-nm light source for SD-OCT and PARS interrogation. Approach: PARS microscopy has predominantly utilized a 1310-nm interrogation light source to date. Hence, a recent dual-modality PARS and 1050-nm SD-OCT imaging system required three distinct wavelengths including a 532-nm PARS excitation, necessitating a free-space optical architecture with discrete subsystems. Here, we validate the first use of a 1050-nm interrogation wavelength for PARS. This enables the transition to fiber-based interferometry as is standard in modern SD-OCT systems, though infeasible with inclusion of an additional 1310-nm wavelength. PARS interrogation functionality is integrated using a broadband optical circulator. Results: Dual-modality imaging is demonstrated in carbon fiber phantoms and a mouse ear in vivo. SD-OCT provided a 4.5-μm lateral resolution, 8.8-μm axial resolution in air, and >101 dB of sensitivity, and PARS contributed 532-nm optical absorption contrast with a 47-dB SNR, and lateral and axial resolutions of 2.4 and 35 μm, respectively. Total interrogation power was reduced from 90% to 58% of the ANSI limit compared to a previous three-wavelength approach. Conclusions: Adapting PARS to use the 1050-nm SD-OCT light source for interrogation enabled implementation of a fiber-based dual-modality system configuration, with image quality maintained. This will facilitate development of potential applications demanding handheld, catheter-based, or endoscopic form factors.