Search

In this article, we explore different device and standard cell architectures for scaling the Germanium fin field-effect transistor (FinFET) and nanosheet (NS) at the sub-5-nm node. It is demonstrated that the Germanium device provides approximately 70% improvement in drive current and $3.4\times $ less device resistance. The main concern for Germanium devices remains the high leakage current due to the gate-induced drain leakage, which limits their usage to high-speed applications. Overall, Germanium devices require fewer boosters than silicon to scale beyond the 5-nm node. Contact resistivity is found to be a critical knob for Germanium and it can be relaxed to 3e $- 9\,\,\Omega $ -cm2 to meet the power and performance targets for the sub-5-nm node. Moving to the NS helps in relaxing this constraint further.

© 2018 IEEE. Carbon Nanotube Field-Effect Transistors (CNFETs) are highly promising to improve the energy efficiency of digital logic circuits. Here, we quantify the Very-Large-Scale Integrated (VLSI) circuit-level energy efficiency of CNFETs versus advanced technology options (ATOs) currently under consideration [e.g., silicon-germanium (SiGe) channels and progressing from today's FinFETs to gate-all-around nanowires/nanosheets]. We use industry-practice physical designs of digital VLSI processor cores in future technology nodes with millions of transistors (including effects from parasitics and interconnect wires) and technology parameters extracted from experimental data. Our analysis shows that CNFETs are projected to offer 9× energy-delay product (EDP) benefit (∼3× faster while simultaneously consuming ∼3× less energy) compared to Si/SiGe FinFET. The ATOs provide

In this paper, lateral gate-all-around nano-sheet transistors (NSH-FETs) are explored from intrinsic performance to dc and ring oscillator (RO) benchmark compared with FinFETs and nanowire transistors (NW-FETs) for sub-7-nm node. The band structure calculated technology computer aided design results show comparable intrinsic performance to FinFETs at same channel cross section. On top of that, dc and RO are evaluated by taking into account electrostatics, parasitic components, and layout configurations. The NSH-FETs show an advantage in drive current with the NSH width but their RO performance is limited by the device capacitance. The multiple narrow NSH-FET shows ~5% higher drive current compared to the NW-FET at similar subthreshold swing, allowing heavier capacitive loaded circuit. In addition, NSH-FETs can provide the device design freedom from aggressive fin pitch scaling.

Negative Bias Temperature Instability (NBTI) is one of the major time-dependent degradation mechanisms that impact the reliability of advanced deeply scaled CMOS technologies. NBTI can cause workload-dependent shifts on a transistor's threshold voltage ( V TH ), and performance during its lifetime. This study presents a comparison of the NBTI aging on adder architectures and ring oscillators in the downscaling technology nodes. The first part of the study focuses on the NBTI-induced performance degradation of 32-bit adders (one of the most fundamental block of a processor's arithmetic logic unit) from the points of architectural topology and workload dependency in the planar technologies (i.e. commercial 28 , 45 , 65 nm nodes), while the second part investigates the energy-delay product degradation of ring oscillators beyond the planar nodes (i.e. research-grade 14 , 10 , 7 nm FinFET technology nodes for several FET channel materials, e.g. Si, SiGe, Ge, InGaAs). Results show the tight coupling between the NBTI aging and the architectural topology, run-time workload, and technology choice.

The continued physical feature size scaling of CMOS transistors is experiencing asperities due to several factors (physical, technological, and economical), and it is expected to reach its boundary in the coming years. Sequential-3D (S3D) integration has been perceived as a promising alternative to continue the benefits offered by semiconductor scaling. This paper addresses the different variants of S3D integration and potential challenges to achieve a realizable solution. We analyze and quantify the benefits observed due to sequential scaling at a die level.

This paper presents a pseudo-2-D surface potential model for the double-gate tunnel field-effect transistor (DG-TFET). Analytical expressions are derived for the 2-D potential, electric field, and generation rate, and used to numerically extract the tunneling current. The model predicts the device characteristics for a large range of parameters and allows gaining insight on the device physics. The depletion regions induced inside the source and drain are included in the solution, and we show that these regions become critical when scaling the device length. The fringing field effect from the gates on these regions is also included. The validity of the model is tested for devices scaled to 10-nm length with SiO2 and high-? dielectrics by comparison to 2-D finite-element simulations.

Suspended gate field-effect transistors (SG-FETs) with switching gates are interesting as digital logic switches because of their high I on/I off current ratio and their infinite subthreshold slope. However, the limits of scalability of the SG-FETs are still unclear. This paper investigates two effects that could limit scaling: the dielectric charging and the dielectric roughness. To do so, a surface-potential-based model for suspended gate transistors with a mechanically switching gate is presented and validated using experimental data. Devices fabricated in a standard complimentary metal-oxide-semiconductor process are used for the model assessment. The model reproduces the effect of a fixed charge and the effect of a nonideal contact of the gate after pull-in. We show that, at the device dimensions required to follow the International Technology Roadmap for Semiconductors, these effects will be critical.

In this paper, we first outline the impact of Bias Temperature Instability (BTI) on the transistor threshold voltage as a function of time and the gate oxide field. Subsequently, the correlation between time-zero and time-dependent variability is described. A combined distribution encompassing both contributions with their relative weights is derived. Finally, circuit-level insights on the BTI impact are given based on case study simulations of Ring Oscillators (ROs) at commercial-grade 28nm planar and research-grade 14, 10, 7nm FinFET technology nodes for several FET channel materials (e.g. Si, SiGe, Ge, InGaAs).

As CMOS technology goes into the nanoscale regime, the impact of layout on the device performance becomes increasingly important. In this paper, we propose a physics-based analytical model for Layout Dependent Effects (LDE) due to shallow trench isolation (STI) stress in 28 nm technology using “gate-last” process (Replacement Gate — RMG). The impact of active size and active width are considered and the model links between stress and device parameters such as the mobility and threshold voltage. The model is validated with experimental data. In addition, we investigate the impact of embedded Silicon-Germanium source/drain (eSiGe S/D) stressors in PMOS. Stronger mobility degradation is predicted for small width devices once eSiGe S/D is used. It results in a larger drop of normalized current (μA/μm) (−16%) once compared to transistors without eSiGe (−7%).

Standard-cell design and characterization are presented for 7-nm CMOS platform technology targeting low-power and high-performance applications with the tightest contacted poly pitch of 42 nm and a metallization pitch of 32 nm in the FinFET technology. Two standard-cell architectures for 7 nm, a 9-track library and a 7.5-track library have been designed, introducing an extra middle-of-line layer to enable an efficient layout of the 7.5-track cells. The 7.5-track cells are on average smaller than the 9-track cells. With the strict design constraints imposed by self-aligned quadruple patterning and self-aligned double patterning, careful design and technology co-optimization is performed.