Search

OBJECTIVES To investigate whether rotational malalignment of tibia, after fracture management with minimally invasive plate osteosynthesis technique (MIPO), leads to impaired results in knee and ankle joint functional scores. DESIGN Prospectively collected data were retrospectively analyzed for this study. SETTING Level III academic trauma center. PATIENTS/PARTICIPANTS Sixty-five consecutive patients who applied between October 2010 and January 2014 with a unilateral distal tibia fracture and had full bone union at their last visit were analyzed. Patients were excluded if they had a pathologic fracture, Gustilo-Anderson type II or III open fracture, additional ligamentous trauma, were pregnant, or had any deformity. A total of 27 patients were accepted into the study. INTERVENTION All patients were treated with a MIPO technique after a mean of 2.8 days. The fibular fracture, when present, was fixed first. MAIN OUTCOME MEASUREMENTS The main outcome of this study was the relation between tibial malrotation after a MIPO procedure, and Lower Extremity Functional Scale, American Orthopedic Foot and Ankle Society, KOOS scores, and range of motions of adjacent joints. RESULTS Fourteen patients (51.8%) had a rotation higher than 10 degrees. The mean malrotation angle was 14.6 degrees. Concomitant fibular fractures were present in 13 patients, which did not seem to have a significant influence on malrotation. There was no significant difference between groups regarding functional scores and range of motions of the knee and ankle joints. CONCLUSIONS Despite high rates of malrotation after tibial metaphyseal-diaphyseal fractures treated with MIPO technique, this finding does not seem to have a significantly negative effect on knee and ankle joint functions. Meticulous intraoperative evaluation, through a range of different techniques, should be performed to avoid malrotation. LEVEL OF EVIDENCE Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Background To evaluate the feasibility and safety of a new minimally-invasive surgical approach–anteromedial minimally-invasive plate osteosynthesis (MIPO)–in the treatment of middle and distal humeral shaft fractures. Methods Fourteen patients with humeral shaft fracture treated with anteromedial MIPO from November 2016 to March 2020 (MIPO Group) were selected as the study subjects. Open reduction and internal fixation (ORIF) were used to treat 14 patients with humeral shaft fractures as the control group (ORIF group). The two groups were fixed with a locking compression plate (LCP) or LCP + multi-directional locking screw system (MDLS). The incision length, intraoperative blood loss, intraoperative fluoroscopy time, operation time, length of hospital stay, fracture healing time, QuickDASH score and Constant score were observed and compared between the two groups. Results Fourteen patients were enrolled in each group. The incision length (7.79 ± 2.39 cm), intraoperative blood loss (96.07 ± 14.96 mL), operative time (110.57 ± 21.90 min), hospital stay (6.29 ± 1.49 days) and fracture healing time (14.94 ± 0.99 weeks) in the MIPO group were all lower than those in the ORIF group, and the difference was statistically significant for each parameter (P P P = 0.078), QuickDASH score (P = 0.074) or Constant score (P = 0.293) between the two groups and no postoperative complications occurred in any of the patients. Conclusion The anteromedial approach MIPO technique has the advantages of less trauma, less bleeding, low risk of nerve injury and high rate of fracture healing. It is one of the most effective methods for the treatment of middle and middle–distal humeral shaft fractures.

The purpose of the study was to compare the stability of the plate osteosyntheses of intra-articular calcaneal fractures using various types of a sustentacular screw insertions. A geometrical model of a calcaneal fracture was created. The fracture was fixed with a plate and screws with a uniform distribution. The individual models differed regarding the position of the sustentacular screw. The screw was inserted using three different variants: Model A: into the tip of sustentaculum tali, Model B: under the sustentaculum tali, and Model C: into the inferior peripherial rim of the sustentacular fragment. In all three variants, the screw was either locked into the plate via threads or unlocked. The model was loaded with force in the vertical direction. The stiffness of individual models was evaluated using the finite element method, which was expressed as the maximum force (Fmax) that the system was able to transmit and by determining the magnitude and distribution of reduced stress (σred) on the individual parts of the model of a fixed calcaneal fracture. The greatest stiffness of the system was observed in the Model B (Fmax = 335.8 N). The least stiffness was observed in Model C (Fmax = 296.3 N). This model also produced the greatest load on bone tissue was observed (σmaxred = 67.5 MPa). The least load on bone tissue was measured in Model B (σmaxred = 53.7 MPa). The load on the plate was similar in all three models (814.0–820.0 MPa). The analyses suggest that in a plate osteosynthesis of a calcaneal fracture, the insertion of a sustentacular screw under the tip of the sustentaculum tali is acceptable in terms of osteosynthesis stability. This sustentacular screw position reduces the risk of the screw penetrating into the talocalcaneal joint.

Introduction Intramedullary nailing (IMN) is currently considered the gold standard in the surgical treatment of tibial shaft fractures in adult patients. In this case-control comparative study, we aimed to compare the efficacy of minimally invasive plate osteosynthesis (MIPO) and IMN in treating tibial shaft fractures. Materials and methods The clinical and radiological outcomes, such as a modified trauma scale, operation time, fracture healing, rate of re-operation, and complications such as malunion, nonunion, shortening, and infection were assessed between IMN and MIPO for the treatment of tibial shaft fractures. Results Seventy-three skeletally mature patients who underwent IMN (group I) or MIPO (group M) for a closed extra-articular tibial shaft fracture (AO/OTA type 42) from June 2010 to May 2016 were retrospectively reviewed. The mean age was 51.16 (18~79) years, and the mean follow-up period was 22 (12~50) months. Bony union was achieved in all cases but one for each group - group I (35 cases) and group M (36 cases) (p > 0.05). Mean callus formation was observed in 12 (8 – 16) weeks in both groups (p > 0.05). There was no significant difference in operative time, hospital stay, bone healing, and the rate of complications among the two groups (p > 0.05). There was also no postoperative difference in functional evaluation between the two methods (p > 0.05). Conclusions No discrepancy was found in radiological and clinical outcomes between IMN and MIPO for tibial shaft fractures. It can be concluded that both IMN and MIPO are equally effective treatment modalities for tibial shaft fractures.

Costochondral separation is a rare phenomenon following blunt thoracic trauma that can also be associated with secondary injuries. We present a case with complete costochondral separation of the right second rib with concomitant mediastinal compression. Definitive treatment was provided through video-assisted thoracoscopic surgical plate osteosynthesis.

Background Clavicle nonunions often result after nonoperative treatment for the acute fracture. Those that require >1 surgical procedure in order for a nonunion to heal are termed recalcitrant. The aims of the present study were to (1) determine healing rates of clavicle nonunions after plate osteosynthesis using either a conventional or locked plate, (2) compare iliac crest bone graft vs. bone morphogenetic protein on nonunion healing, and (3) identify risk factors for the development of a recalcitrant nonunion. Methods We performed a retrospective analysis of a prospectively collected database of 78 clavicle nonunions treated with open reduction and plate fixation with or without graft augmentation by a single surgeon over 25 years. Seventy-one patients over the age of 18 with at least 12 months of follow-up comprised the study group. We analyzed healing rates after the index clavicle nonunion surgery comparing plate type and graft technique as well as identifying risk factors for developing a recalcitrant nonunion. Results A total of 62 patients (87.3%) healed after their index nonunion surgery at our institution. Three patients (4.2%) required additional surgery but healed, and 6 patients (8.5%) remain un-united; these 9 patients (12.7%) were defined as recalcitrant. There was no statistically significant difference in healing rates between plate type (P = .633) or type of bone graft (P = .157). There were no identifiable risk factors for the development of a recalcitrant nonunion. Conclusions Plate fixation of clavicle nonunions remains a successful method of treatment. The type of plate or the method of bone graft did not produce different results. There were no demographic, patient, or injury characteristics associated with the development of a recalcitrant nonunion.

Since its conception in 1989, minimally invasive plate osteosynthesis (MIPO) has gained widespread popularity. It has been studied in over forty countries with most of the publications originating from Asia, Europe and North America. This review aims to describe the scientific path of MIPO from the very beginning to where it stands in current day times; study the pattern and contributing factors influencing its global spread. Finally, the up to date evidence is discussed with regard to several anatomical regions in which MIPO is mostly used. In the meantime, MIPO treads steadily towards accomplishing the same or better outcomes for more and more indications with the goal to leave a smaller surgical footprint to allow for undisturbed bone healing.

Purpose Fragility fractures of the pelvis (FFP) are common in older patients. We evaluated the clinical outcome of using a minimally invasive posterior locked compression plate (MIPLCP) as therapeutic alternative. Methods 53 Patients with insufficiency fractures of the posterior pelvic ring were treated with MIPLCP when suffering from persistent pain and immobility under conservative treatment. After initial X-ray, CT-scans of the pelvis were performed. In some cases an MRI was also performed to detect occult fractures. Postoperatively patients underwent conventional X-ray controls. Data were retrospectively analyzed for surgical and radiation time, complication rate, clinical outcome and compared to the literature. Results Patients (average age 79.1 years) underwent surgery with operation time of 52.3 min (SD 13.9), intra-operative X-ray time of 9.42 s (SD 9.6), mean dose length product of 70.1 mGycm (SD 57.9) and a mean hospital stay of 21.2 days (SD 7.7). 13% patients (n = 7) showed surgery-related complications, such as wound infection, prolonged wound secretion, irritation of the sacral root or clinically inapparent screw malpositioning. 17% (n = 9) showed postoperative complications (one patient died due to pneumonia 24 days after surgery, eight patients developed urinal tract infections). 42 patients managed to return to previous living situation. 34 were followed-up after a mean period of 31.5 (6–90) months and pain level at post-hospital examination of 2.4 (VAS) with an IOWA Pelvic Score of 85.6 (55–99). Conclusion We showed that MIPLCP osteosynthesis is a safe surgical alternative in patients with FFP 3 and FFP 4. This treatment is another way of maintaining a high level of stability in the osteoporotic pelvic ring with a relatively low complication rate, low radiation and moderate operation time and a good functional outcome.

Surgical treatment of mid-shaft clavicle fractures via anatomical plates in adult athletes is documented to be safe and effective. Functional and cosmetic outcomes in adolescent contact sports athletes have not been well documented. Adolescent athletes (age 11-19) surgically treated for mid-shaft clavicle fractures between 1 May 2011 and 30 October 2017 were included in this study. Twenty-one adolescent athletes with a mean follow-up of 44 months were reviewed. Retrospective chart reviews were performed. Functional and cosmetic outcomes, return to sports time/rate were analyzed using Nottingham Clavicle Scores and a 'Custom Questionnaire'. Return of function and healing, evidenced on radiographs, was achieved in all 21 patients. All patients returned back to competitive sports. The mean time to return back to training was 45.9 ± 16 (24-76) days. Sixteen (76.1%) of the patients reported Nottingham Clavicle Scores with a mean score of 91.7 (85-98). In the Custom Questionnaire, 16 patients who participated in the phone interview were satisfied with the cosmetic outcomes. The most common complaint was implant prominence and irritation in 6 (40%) patients, subsequently requiring implant removal in 3 (18.8%). Surgical fixation of mid-shaft clavicle fractures can lead to excellent union and cosmetic outcomes and a rapid return to sports in adolescent contact sport athletes. However, one should consider the outcomes of implant-related complaints and the possibility of implant removal surgery in the future.

Objectives This study aims to compare intramedullary nailing (IMN) and minimally invasive plate osteosynthesis (MIPO) treatment methods in Arbeitsgemeinschaft fur Osteosynthesefragen (AO) 42A1 & 42B1 selected tibial shaft fractures. Patients and methods Fifty-one patients (31 males, 20 females; mean age 43.5±14.2 years; range, 18 to 81 years) operated for AO 42A1 or AO 42B1 tibial shaft fractures between January 2006 and January 2012 were retrospectively evaluated. Twenty-three of these patients were treated with MIPO and 28 with IMN. Patients were compared in terms of union time, return to work, infection, malunion, hospital stay, and sixth month and two-year Lower Extremity Functional Scale (LEFS) values. Results There was no difference between the MIPO and IMN groups in terms of demographic data, etiology, and fracture patterns. The mean follow-up time was 37.8±8.8 months in MIPO group and 35.9±8.7 months in IMN group. Union time (p=0.575), return to work (p=0.155), infection (p=0.643), malunion (p=0.471), and hospital stay (p=0.538) were all similar between groups. Although the LEFS value was higher in IMN group in sixth month (p=0.026), the two-year LEFS value was similar between groups (p=0.085). Conclusion Results of the study showed that both treatment methods are similar regarding clinical and functional outcomes. According to these results, MIPO can be recommended as an alternative to IMN in tibial shaft fractures formed as spiral oblique and spiral wedge.

Distal tibia fractures have been managed conservatively as well surgically. A large number of implants have been used for surgical management of these fractures. No treatment method or implant has been proven to be superior to others. In this prospective comparative study, the complications and outcome of distal tibia fractures managed with intramedullary nails and minimally invasive plate osteosynthesis has been compared. Further, the role of fibula fixation in these fractures has been evaluated. One hundred and fifty-four patients of distal tibia fractures with concomitant fibula fractures were randomized into 4 treatment groups based on predetermined inclusion criteria. Functional outcome in these groups was compared based on AOFAS score at 1 year. Intra-operative, post-operative parameters as well as radiological alignment, complications and the need for reoperation were also compared in these groups. The functional outcome in all four treatment groups was similar. The duration of surgery and radiation exposure was higher with minimally invasive plate osteosynthesis. There was no improvement in outcome with plating of fibula. However, fixation of fibula improved the rotational alignment in distal tibia fractures. Although there is no difference in outcome of distal tibia fractures with either nailing or minimally invasive plating, nailing is recommended for closed displaced extraarticular fractures. Fixation of fibula should not be done routinely but should be reserved only for a few specific fracture patterns.

Background Because of poor soft-tissue coverage at the proximal ulna and prominent posteriorly positioned implants, hardware removal remains the most common reason for revision surgery of olecranon fractures that were operatively treated using plate osteosynthesis. We hypothesized that low-profile double-plate osteosynthesis would reduce the number of soft tissue–related hardware removals compared with single posterior plating whereas the functional results would be comparable. Methods This study retrospectively included patients who were treated with low-profile double-plate osteosynthesis or a posterior 2.7-/3.5-mm locking compression plate (LCP) for isolated olecranon fractures from 3 study centers. In addition to the implant removal rate, functional outcome measures (range of motion; Mayo Elbow Performance Score; Disabilities of the Arm, Shoulder and Hand score) were statistically compared. Results The study included 79 patients, with a mean follow-up period of 36 months (range, 24-77 months). Of these patients, 37 were treated with low-profile double-plate osteosynthesis and 42, with a 2.7-/3.5-mm LCP. The mean age was 57 years (range, 18-93 years). Range of motion after treatment with low-profile double-plate osteosynthesis and a 2.7-/3.5-mm LCP measured 129° (range, 80°-155°) and 139° (range, 100°-155°), respectively. The Mayo Elbow Performance Scores were 95 (range, 65-100) and 99 (range, 85-100), respectively (P = .028), and the Disabilities of the Arm, Shoulder and Hand scores were 5.0 (range, 0-49) and 4.6 (range, 0-28), respectively (P = .673). Hardware was removed in 32% and 50% of patients after treatment with double-plate osteosynthesis and a 2.7-/3.5-mm LCP, respectively (P = .11). Hardware removal owing to soft-tissue irritation was noted in 27% of patients after double-plate osteosynthesis and 38% after LCP treatment (P = .30). Discussion Low-profile double-plate osteosynthesis for treating olecranon fractures resulted in good clinical outcomes. However, the rate of hardware removal was not significantly reduced, and the functional results were comparable to those of common single–posterior plate osteosynthesis.

The aim of the present study was to examine the biomechanical stability of the mandibular angle fractures (MAF) fixated with standard titanium miniplates in polyurethane models with different gonial angles (GA). Three custom molds were prepared for 3-dimensional printed mandibles with low, normal and high GA. Twenty polyurethane replicas were cast per group and standard MAFs were created on each sample. Fractures were stabilized with 1 4-hole standard titanium miniplate inserted over the superior alveolar border. Half of the samples were subjected to molar loading and the other half to the incisal loading up until 150 N force magnitude. The load-displacement curves and the horizontal moment arms were recorded and analyzed. The samples with high GA demonstrated greater displacement than those with normal and low GA during molar loading (P < 0.05 for both). After correcting for the effects of the moment arm, the incisal loading also resulted in higher mean displacement in the high GA group than the others (P < 0.05 for both) and the normal GA samples showed higher displacement after 100 N level compared to those in low GA (P < 0.05). Within the limits of this in vitro study, it can be concluded that the MAFs of the polyurethane mandibles with high GA fixated with 1 standard monocortical plate are more likely to demonstrate higher displacement values under the effects of the molar and incisal loadings than do the mandibles with normal and low GA.

Introduction The necessity for reduction and fixation of posterior malleolus fractures remains under debate. Therefore, we assessed the functional outcome and quality after plate osteosynthesis of the posterior malleolus, identified the main drivers of outcome and aimed to determine which patient and fracture type are eligible for plate osteosynthesis of the posterior malleolus. Materials and methods A prospective patient cohort of 50 patients with an ankle fracture including the posterior malleolus underwent plate osteosynthesis via a posterior approach, and was compared to a retrospective patient cohort of 85 consecutive patients who did not. Twenty-five demographic, operative and postoperative characteristics were assessed. Outcome was recorded using questionnaires: AOFAS, EQ-5D, EQ-5D-VAS, EQ-5D-TTO, sensory nerve‐associated complications, and flexion deficit of the hallux. Results Direct reduction and plate osteosynthesis of posterior malleolus fractures was inferior to non-operative treatment. Subanalysis of trimalleolar fractures revealed that the outcome of plate osteosynthesis was equal. Both fracture type and plate osteosynthesis were independent drivers of the outcome; Haraguchi type 3 posterior malleolus fractures were associated with the best functional outcome and quality of life scores. Comorbidity, age, postoperative complications and reintervention largely determined the outcome. Up to 30% of the patients reported (temporarily) flexion deficit of the hallux and 38% numbness at the lateral side of the foot. Conclusions There is no indication for routine plate osteosynthesis of all posterior malleolus fractures. Careful patient selection, less invasive surgery and modified postoperative rehabilitation seem mandatory to improve the outcome and prevent adverse effects.

BACKGROUND Up to date there is no intramedullary, biodegradable osteosynthesis commercially available to treat non-comminuted midshaft fractures of small hollow bones applying not only a stable osteosynthesis but an additional axial compression to the fracture site. OBJECTIVE AND METHODS Therefore we (1) designed different implant profiles and simulated the inner tension/volume using CAD. (2) Thereafter we manufactured a prototype with the best volume/tension-ratio using 70:30 poly-(L-lactide-co-D, L-lactide) (PLLA/PDLLA) and poly-e-caprolactone (PCL) by injection moulding. Both materials are resorbable, licensed for medical use and show a slow degradation over at least one year. (3) The implants were tested in a universal testing machine (Zwick/RoellZ010) using a 3-point-bending-setup. (4) We compared the implants with different types of commercially available Ti6Al4V 6-hole 2, 3 mm-plates including interlocking systems (Leibinger Set, Stryker) (each group n= 6) using a 4-point-bending-test-setup with artificial metacarpal bones (Sawbones®). RESULTS The 3-point-bending-test-results showed that mean failure-force of PCL-tubes was 57.94 ± 4.28 N whereas the PLLA/PDLLA-tubes had an approximately four-fold higher value of 227.24 ± 1.87 N (p< 0.001). Additionally, the 4-point-bending-test-results showed that the maximum load of PLLA/PDLLA tubes (61.97 ± 3.58 N) was significantly higher than the strongest 6-hole metacarpal plate (22.81 ± 0.76 N) (p< 0.001). CONCLUSION The study showed that the new type of biodegradable, intramedullary tension-osteosynthesis made of PLLA/PDLLA is even more stable than common plate osteosynthesis in a small-hallow-bone-model. Further in vivo investigation should be performed to evaluate the surgical technique and long-term healing process of the bone and biodegradation process of the implant.

Treatment of ulnar diaphyseal fractures can range broadly from nonoperative with immobilization to surgical intervention with a variety of implants or approaches. At a Level 1 trauma center, a series of ulnar shaft fractures have been treated using a percutaneous plating technique that is base beneath the extensor carpi ulnaris. This technique description illustrates relevant anatomy, important patient and injury characteristics, implant considerations, and potential outcomes and complications. The described treatment option provides an effective way of spanning comminuted fracture patterns without disrupting the surrounding biology while providing stable fixation. An associated patient series is included which enumerates associated injuries and describes limited follow-up. In the multiply injured trauma patient, such a fixation method also had potential benefits for their overall care and rehabilitation.

Purpose of this study was to analyse the medium term follow-up of minimally invasive plate osteosynthesis (MIPO) for proximal humeral fractures in terms of postoperative shoulder function, radiological outcome and complications.76 consecutive patients with unstable proximal humeral fractures were treated using locking plate with a minimally invasive antero-lateral approach in two surgical centers. Constant score and radiographic evaluation of 74 patients were available at mean follow up of 5 years (minimum 4 years).Mean Constant score was 74 (range to 28-100). Results were comparable in the two centers. Younger patients registered significantly higher scores (p 0.05). 20 patients (27%) developed complications. Subacromial impingement occurred in 16,2% of cases for varus malreduction (6,7%) and for too proximal plate positioning (9,5%). Primary screws perforation (2,7%), secondary perforation due to cut-out (1,4%), avascular necrosis (AVN) of humeral head (1,4%), partial resorption of greater tuberosity (2,7%), secondary displacement of the greater tuberosity (2,7%) and stiffness (2,7%) were observed.Even at a medium term follow-up, MIPO for proximal humeral fractures ensured good and reproducible results for most common pattern of fractures. Major complications were lower respect to open procedures, because of soft tissue, deltoid muscle and circumflex vessels sparing.

Background Surgical treatment of extra-articular distal-third diaphyseal humeral fractures is controversial in terms of surgical approach and position of implant. The aim of this study is to evaluate the clinical and radiological outcomes of a modified application of the proximal humeral internal locking system (PHILOS) plate in extra-articular distal-third diaphyseal humeral fractures. Materials and methods A total of 23 patients with extra-articular distal humerus fractures were treated using either open plating or the minimally invasive plate osteosynthesis (MIPO) technique with upside down application of the PHILOS plate. Fracture configuration, number of screws in the distal fragment, and time to union were analysed. Elbow range of motion, Mayo Elbow Performance Score (MEPS), and complications were evaluated at the final follow-up. Results Fracture union was obtained in all patients at a mean postoperative time of 20.8 ± 2.9 weeks. The mean shortest and longest cortical lengths were 50.7 ± 14.0 mm and 85.2 ± 12.4 mm, respectively. The average number of screws in the distal humeral fragment was 5.6 ± 0.7. No statistically significant correlation was observed between the shortest cortical length and number of screws in the distal fragment (p = 0.224) or between the longest cortical length and the number of screws in the distal humeral fragment (p = 0.956). The average MEPS was 97.6 (range, 75–100). No postoperative complications that required reoperation were occured. Conclusion A modified anterior application of the PHILOS plate in extra-articular distal-third diaphyseal humeral fracture showed satisfactory outcomes, so it is an alternative when considering the ability to increase plate-screw density with locking screw fixation in a distal humeral fragment. Level of evidence Therapeutic level IV, case series.

With the increasing number of total knee arthroplasties (TKAs) being performed, the incidence of periprosthetic fractures adjacent to a TKA is rising. Minimally invasive plate osteosynthesis (MIPO) has proven to be successful for the biological fixation of many fractures. Advances in surgical instrumentation and techniques made MIPO possible for more complex fractures. Periprosthetic fractures are always complicated by problems of soft tissue incisions, scarring, and, of course, the arthroplasty components. MIPO techniques may be particularly suited to these injuries and may make the surgical repair of these fractures safer and more reliable. In this review, case examples are used to define the indications, preoperative planning, implant selection, complications, limitations, and challenges of MIPO for the treatment of periprosthetic fractures about the knee. When considering MIPO for any fracture, we recommend prioritizing an acceptable reduction with biological fixation and resorting to mini-open or open approach when necessary to achieve it. Awareness of the learning curve of the surgical technique, advances in implant designs, the tips and tricks involved, and the limitations of the MIPO is of paramount importance from the orthopaedic surgeon's perspective.

Background Cement augmentation has been suggested to increase the stability of screw anchoring in osteoporotic humeral fractures. Initial results are promising but may be jeopardized by cement leakage into the joint and difficult implant removal. Absorbable cement might have advantages in this regard, but it is unclear if the primary stability of both techniques is equivalent to each other. Therefore, this study aimed to compare its primary stability with that of non-absorbable cement augmentation. Methods Nineteen cadaveric humeri with two-part fracture models were treated with locking plate osteosynthesis and cement augmentation using either absorbable calcium phosphate cement (group 1) or polymethylmethacrylate (group 2). Fracture movement, stiffness, failure mode, and ultimate load under cyclic compressive loading were examined and compared between the groups. Findings The absolute and relative stiffness values in group 1 were significantly smaller than those in group 2 after 50 cycles (group 1: 114 ± 38 N/mm and 94 ± 8% vs. group 2: 188 ± 71 N/mm and 106 ± 9%; p50 = 0.022), 2000 cycles (group 1: 97 ± 34 N/mm and 81 ± 15% vs. group 2: 153 ± 47 N/mm and 88 ± 15%; p2000 = 0.028), and 5000 cycles (group 1: 98 ± 40 N/mm and 81 ± 22% vs. group 2: 158 ± 40 N/mm and 92 ± 16%; p5000 = 0.028). The failure load was not statistically significantly different between the groups. Interpretation Although the PMAA group showed higher values for absolute and relative stiffness, no statistically significant difference was found in the primary stability between absorbable and non-absorbable cement augmentation supporting plate osteosynthesis in proximal humeral fractures. In view of the potential advantages of bio-absorbable cement during the healing process, its use should be considered for the augmentation and stabilization of osteoporotic fractures.

Introduction: Posterior tibial plateau fractures (PTPF) have a high impact on functional outcome and the optimal treatment strategy is not well established. The goal of this study was to assess the relationship between trauma mechanism, fracture morphology and functional outcome in a large multicenter cohort and define possible strategies to improve the outcome. Methods: An international retrospective cohort study was conducted in five level-1 trauma centers. All consecutive operatively treated PTPF were evaluated. Preoperative imaging was reviewed to determine the trauma mechanism. Patient reported outcome was scored using the Knee injury and Osteoarthritis Outcome Score (KOOS). Results: A total of 145 tibial plateau fractures with posterior involvement were selected with a median follow-up of 32.2 months (IQR 24.1-43.2). Nine patients (6%) sustained an isolated posterior fracture. Seventy-two patients (49%) sustained a two-column fracture and three-column fractures were diagnosed in 64 (44%) patients. Varus trauma was associated with poorer outcome on the 'symptoms' (p = 0.004) and 'pain' subscales (p = 0.039). Delayed-staged surgery was associated with worse outcome scores for all subscales except 'pain'. In total, 27 patients (18%) were treated with posterior plate osteosynthesis without any significant difference in outcome. Conclusions: Fracture morphology, varus trauma mechanism and delayed-staged surgery (i.e. extensive soft-tissue injury) were identified as important prognostic factors on postoperative outcome in PTPF. In order to assess possible improvement of outcome, future studies with routine preoperative MRI to assess associated ligamentous injury in tibial plateau fractures (especially for varus trauma) are needed. (c) 2021 Elsevier B.V. All rights reserved.

Background Limited reports have examined the outcomes and complications of minimally invasive plate osteosynthesis (MIPO) with a locking plate (LP) in metastatic humeral fractures. Therefore, this study aimed to evaluate the effectiveness of MIPO in the treatment of metastatic humeral fractures. Methods Patients who underwent MIPO for metastatic humeral fractures were included in this study. Data on patient demographics, new Katagiri score, operative time, amount of blood loss, bone union rate, range of motion (ROM) of the shoulder and elbow, and perioperative complications were obtained. Results Twelve patients (seven men and five women) with 14 fractures were included in this study. The median operative time was 92.6 ± 28.9 min (range, 57–175 min) and the median amount of intraoperative blood loss was 106.1 ± 109.5 g (range, 10–330 g). No patient required surgery-related transfusion. The median duration of acquisition of active elbow ROM of>100° and active shoulder flexion of >90° were 8.9 ± 6.6 days (range, 1–30 days) and 17.5 ± 13.0 days (range, 6–47 days), respectively. The mean follow-up period was 10.0 ± 9.0 months (range, 1–33 months). There were no complications, and no patient required any further surgery for the affected humerus until death. Conclusion MIPO using an LP provided acceptable functional outcomes in advanced-stage cancer patients with metastatic humeral fractures during their limited lifetime.

Three part and four-part fractures of the proximal humerus offer challenges in reduction and plate fixation, with considerable debate about use of Deltoid splitting (DS) and Delto-pectoral (DP) approaches, especially when they involving the greater tuberosity. We prospectively compared the results using DS approach and DP approach in these cases, with special focus on functional outcomes, complications, and ease of tuberosity reduction. 84 patients with three- and four-part proximal humerus fracture were alternately allocated the DP approach or DS approach for proximal humerus locking plate fixation. The outcome analysis was done by evaluating relative Constant score and ease of surgical reduction of greater tuberosity; radiological malunion was evaluated using Beredjiklian classification and complications were noted. At mean follow-up of 23 months (19–48 months), the mean ‘relative Constant score was 74.27 ± 8.19 in the DP group and 73.26 ± 8.02 in the DS group and the difference was statistically insignificant (p = 0.988). There was no significant difference with respect to shoulder ROM, abductor strength, radiological malunion or complications. However, the mean surgical time was significantly less (p value = 0.042) in DS group (65 ± 5 min) in comparison to DP group (92 ± 4.3 min); significantly less difficulties were documented by the surgeon in reducing the greater tuberosity in DS group(p value = 0.02). Although surgical time was reduced and greater tuberosity reduction was easier in DS group, the other outcomes were similar; either surgical approach can be used based, and can be based on the experience and comfort level of the surgeon.

Background Different stand-alone cerclage configurations and their optimal twisting techniques have been investigated over the years. This study tests for the stabilizing effect of different supplemental cerclage materials in combination with locked plating of distal tibia fractures. Methods Locking plate fixation of a distal tibial spiral fracture was tested as stand-alone and with supplemental cerclage materials (one cable, two cables, wire, fiber tape). Construct stiffness and fracture gap movements were investigated under quasi-static and dynamic loads and compared to the stand-alone locking plate. Results With each of the tested cerclages, stiffness was significantly higher than for a solitary plate osteosynthesis. Most reduction in fracture gap movement was achieved by cable cerclages, followed by double-looped wire and double-looped fiber tape cerclages. Under dynamic loading an additional cable cerclage reduces excessive gap movement. Conclusion Compared to solitary plate osteosynthesis all supplemental cerclage materials were generally superior with reduced fracture gap movements whereas cable cerclages showing the greatest stabilizing effect.

Background: Several approaches to plate fixation of the proximal phalanx have been proposed, such as the dorsal extensor splitting approach and the lateral or dorso-lateral extensor sparing approach, which aims to minimise invasiveness to promote native extensor tendon glide. This study aimed to meta-analyse the outcomes of these two approaches. Methods: A systematic review of electronic databases was undertaken, and the outcomes of comparative studies meta-analysed. Results: Three studies were included for meta-analysis. Total active motion (TAM) was significantly greater in the extensor sparing group compared to the extensor splitting (Mean difference 8.52 degrees, 95%CI 0.8–16.36, p = 0.03). Conclusions: This study demonstrates that there is preliminary evidence favouring the use of extensor sparing approaches when fixing proximal phalanxes – however, this result requires validation with randomised controlled trials.

There is no uniform approach to the management of lateral clavicle fractures. Recent studies have investigated additive coracoclavicular (CC) augmentation as a treatment option; however, it is unclear whether it is superior to conventional locking plate osteosynthesis. We carried out a retrospective analysis of 40 patients with lateral clavicle fracture (Neer type IIb) who were treated between 2014 and 2017 with either a hybrid locking plate osteosynthesis/additive arthroscopy-assisted CC augmentation (HP) procedure or a locking plate osteosynthesis only (PO) approach to determine which strategy was more effective. At follow-up, subjective shoulder value, age- and sex-adjusted Constant-Murley score, Taft (TF) score, American Shoulder and Elbow score, Nottingham clavicle score, and Visual Analogue Scale score were compared between patient groups. A radiologic evaluation was also conducted. A total of 14/17 patients (83%; 9 male/5 female, mean age: 43 ± 15 years) were followed up in the PO group. The mean follow-up time was 29 ± 12.4 months. In the HP group, 17/23 patients (74%; 9 male/8 female, mean age: 43 ± 17 years) were followed up, with a mean follow-up time of 18 ± 7.1 months. There were no significant differences in clinical parameters between the HP and PO groups; notably, the shoulder girdle-specific TF score was comparable in the 2 groups (HP: 11.3 ± 1.1 points and PO: 10.9 ± 0.9 points). In the HP group, additional pathologies were identified and arthroscopically treated in 35% of cases. Radiologic examination revealed a significant difference between pre- and postoperative CC distance in the HP group (P = 0.001). Additive CC augmentation in combination with locking plate osteosynthesis seems to improve the vertical stability and reduces the revision rate in patients with a lateral clavicle fracture. Furthermore, an arthroscopy-assisted procedure allows for an intraoperative detection and single-step treatment of accompanying intraarticular pathologies.

Objective To report the results of patients with short oblique diaphyseal tibia fractures treated with minimally invasive plate osteosynthesis (MIPO). The secondary aim was to understand the effect of fracture location (midshaft or distal 1/3) on outcomes. Methods Twenty-eight patients with short oblique (>30°) tibial shaft fractures (AO/OTA 42A2) treated with plate and MIPO technique between 2015 and 2019 were retrospectively assessed. Age, gender, follow-up time, fracture type (open or closed), operation time, postoperative infection rate, union time, ankle joint range of motion, and complications were analyzed. Patients’ radiographs at a minimum 1-year follow-up were evaluated for malunion, nonunion, and implant-related complications. Results Mean age and follow-up time were 47.0 ± 15.7 years and 18.3 ± 12.1 months, respectively. Mean bone union time was 3.66 ± 1.04 months in middle 1/3 diaphysis and 4.23 ± 1.48 months in distal 1/3 tibia fractures. Seven (25%) patients developed superficial infections. Mean union time, malunion rate, coronal and sagittal angulation, operation length, and infection rate were similar between the groups. Conclusion MIPO is an effective method for treatment of short oblique diaphyseal tibia fractures, and results in few complications. Both distal and midshaft fractures have similar union and malunion rates.

Management of posterior tibial plateau fractures has gained much interest over the past few years. Fracture morphology, trauma mechanism, and soft-tissue injury have been identified as the key factors determining the treatment strategy and outcome. We provide a rationale for the operative management of posterior tibial plateau fractures by discussing the interplay between fracture morphology, trauma mechanism, and soft-tissue injury. The trauma mechanism has proven to be an important tool, not only to understand fracture morphology, but also to assess concomitant soft-tissue (i.e. ligamentous) injury. Subsequently, soft-tissue injury might play a role in future classification and diagnostic work-up of tibial plateau fractures, particularly in fractures with posterior involvement. Plate osteosynthesis using a posterior approach is safe and should be considered routinely in coronal fractures of the posterior tibial plateau, as illustrated.

Comminuted extraarticular metaphyseal and diaphyseal fractures of the distal humerus frequently require operative fixation through a posterior approach. Most of the previously described approaches to the posterior humerus are dependent on large and extensile approaches. This video demonstrates open reduction and internal fixation of a comminuted metaphyseal distal humerus fracture through a minimally invasive posterior approach.

Transgluteal approach for anatomical reduction of femoral neck fractures (extra-intraarticular) in children under preservation of the blood supply of the femoral head.Femoral neck fractures AO 31-M/2.1 I‑III; 31-M/3.1 I‑III; 31-M/3.2 I‑III.None.Preparation of a muscular flap including the proximal insertion of the vastus lateralis muscle and approximately one third of the gluteus medius muscle. Elevation of the gluteus minimus muscle from the hip capsule without completely detaching it from its insertion. Exposure of the anterolateral hip capsule and capsulotomy followed by controlled reduction of the fracture fragments without compromising the retinacular vessels.Touch-down weightbearing for 4-6 weeks (age dependent). To protect the healing of the abductors, active abduction or passive adduction prohibited for 4-6 weeks. Consolidation radiographs 4-6 weeks postoperatively.Excellent results in 29 patients subsequently treated in the last 10 years by the transgluteal approach. No cases of avascular necrosis of the femoral head by this procedure.OPERATIONSZIEL: Die Hüftkopfzirkulation schonende, anatomische Reposition und sichere Stabilisierung von Schenkelhalsfrakturen im Kindesalter über einen transglutealen Zugang.Intra-extraartikuläre proximale Femurfrakturen (Schenkelhalsfrakturen) AO 31-M/2.1 I‑III; 31-M/3.1 I‑III; 31-M/3.2 I‑III.Keine.Präparation eines Muskellappens durch Ablösen des proximalen M. vastus lateralis inklusive des anterolateralen Anteils des M. glutaeus medius vom proximalen Femur respektive Trochanter major. Ablösen des glutaeus minimus von der Gelenkkapsel und Weghalten nach dorsal, ohne die Insertion des Muskels vollständig abzulösen. Die anterolaterale Gelenkkapsel kann nun vollständig exponiert werden. Arthrotomie der Gelenkkapsel und Darstellen des Schenkelhalses. Unter Sicht nun vorsichtige, kontrollierte Reposition der Fraktur unter Schutz der retinakulären Gefäße.Mobilisation an Gehstöcken. Abstellen des Fußes erlaubt. Zur vollständigen Anheilung der Hüftabduktoren sollte eine aktive Abduktion sowie passive Adduktion für 4 bis 6 Wochen (je nach Alter des Patienten) vermieden werden.In der eigenen Klink zeigten sich in den letzten 10 Jahren exzellente Ergebnisse bei 29 Patienten nach Behandlung von kindlichen Schenkelhalsfrakturen mit diesem Operationszugang. Eine operationsbedingte Femurkopfnekrose trat nicht auf.

Backgroud Controversy exists about the optimal treatment of midshaft clavicle fractures in the presence of significant displacement, comminution, or shortening of the fracture in adolescents. The purpose of this study was to compare the clinical and radiological outcomes of 4 different treatments for midshaft clavicle fractures in adolescents: conservative treatment with a figure-of-8 (FO8) brace, open reduction and internal fixation with a plate (OPL), minimally invasive plate osteosynthesis (MIPO), and intramedullary nail fixation with a threaded Steinmann pin (TSP). Methods A total of 94 teenagers with midshaft clavicle fractures were divided into the FO8, OPL, MIPO, and TSP groups (n = 24, 33, 16, and 21, respectively). We analyzed clinical and radiological outcomes and complications in each group and compared the results among the groups. Results All groups showed satisfactory clinical and radiological outcomes, but each group showed different results for the assessment items. The Constant-Murley scores were higher in the operated groups than in the FO8 group. Recovery of joint motion was faster in the operated groups. The TSP group had the highest cosmetic satisfaction with respect to the satisfaction score and measured scar length. Fracture union was achieved in all patients. At the final follow-up, the bone length was closer to normal in the OPL and TSP groups than in the FO8 and MIPO groups, and angulation was less in the OPL and TSP groups than in the MIPO and FO8 groups. The TSP and MIPO groups obtained faster bone healing than the OPL and FO8 groups. In the operated groups, 9 patients had metal-induced irritating symptoms; 1, supraclavicular nerve injury symptoms; and 4, refractures after plate removal. Conclusions The nonoperatively treated group had no iatrogenic complications. The operated groups complained of various disadvantages induced by surgery; however, these groups achieved faster functional recovery and slightly better radiological and functional results than the nonoperative group.

Introduction The aim of this study was to perform MIPO of the distal tibia from a dorsomedial and dorsolateral approach and to evaluate their feasibility and risk of injury to adjacent anatomical structures. Material & Methods A total of 18 extremities from 9 adult human cadavers was included in the study. In each cadaver, one lower leg underwent application of a 12-hole 3.5 LCP metaphyseal plate from the medial and the further one from the lateral approach. For the medial approach, a 4 cm skin incision was performed at the tibial border of the Achilles tendon, starting from 1 cm proximal to its insertion point at the calcaneal tuberosity. Entrance was gained between the medial border of the flexor hallucis longus tendon and the medial neurovascular bundle. Regarding the lateral approach, the skin was incised over a length of about 4 cm at the lateral border of the Achilles tendon, approximately 1 cm proximal to its insertion point. Entrance was gained between the Achilles tendon and the peroneus brevis muscle. The plates were inserted in direct bone contact in a proximal direction and the proximal and distal ends were fixed. During dissection, the proximal and distal holes beneath the crossing points of the neurovascular bundle and the plate were noted. The distal and proximal intersection points of the neurovascular bundle and the plate were measured with reference to the distal border of the plate. Results Concerning the medial approach, the neurovascular bundle was on median located between the 6th and 11th plate holes starting from distal. The bundle intersected the plate distally at a mean height of 65.8 mm and proximally at 156.8 mm on average. For the lateral approach, the neurovascular bundle was situated between the 6th and the 12th plate hole from distal. It crossed the plate distally at a mean of 61.0 mm and proximal at a mean height of 153.9 mm. In none of the cases, lacerations of the neurovascular bundle were observed. Conclusion In conclusion, MIPO from the dorsomedial and dorsolateral approach are both safe procedures as indicated by our study.

BACKGROUND The less invasive stabilization systems for the distal femur and proximal lateral tibia have been developed to simplify the surgical technique of minimally invasive plate osteosynthesis (MIPO). MIPO, however, has simply been introduced into clavicular midshaft fixation without the aid of insertion guide though the procedure for midshaft clavicular fractures was found to produce satisfactory clinical and radiologic outcomes without serious complications. The purpose of this study was to determine the outcome of MIPO of clavicular midshaft fractures using an insertion guide. METHODS A total of 15 patients with clavicular midshaft fractures treated by MIPO using insertion guide between September 2016 and September 2018 were included. We assessed bony union, shoulder function by the Constant score, and complications at a mean follow-up of 15.4 months (ranged from 12 to 24 months). RESULTS The mean surgical time 55.9±9.4 min (ranged from 50 to 70 min) and the fluoroscopic time was 146.5±29.0 s (ranged from 110 to 190 s). In all patients, the bony union was achieved at 8.8±1.0 weeks (ranged from 8 to 10 weeks) with no delayed unions or nonunions. The average Constant score was 99.1±1.2 (ranged from 96 to 100) at follow-up. Postoperative complications including infections, screw pull-out, hardware prominence, and neurovascular injury were not observed, however, one patient complained of mild plate discomfort. CONCLUSION MIPO using insertion guide is believed to be an acceptable and effective choice in the operative treatment of clavicular midshaft fractures.

Dislocated pelvic fractures which require surgical repair are usually operated on via open surgery. Approach-related morbidity is reported with a frequency of up to 30%. The aim of this anatomical study was to prove the feasibility of endoscopic visualisation of the relevant anatomical structures in pelvic surgery and to perform completely endoscopic plate osteosynthesis of the acetabulum with available standard laparoscopic instruments.In four human cadavers, we established an endoscopic preparation of the complete pelvic ring, from the symphysis to the iliosacral joint, including the quadrilateral plate and the sciatic nerve, and performed endoscopic plate osteosynthesis along the iliopectineal line.The endoscopic preparation of the complete pelvic ring and the quadrilateral plate was demonstrated step-by-step, followed by completely endoscopic plate osteosynthesis along the pelvic brim. Endoscopic, radiographic, and schematic pictures are used to illustrate the technique.The completely endoscopic preparation of the pelvic brim and the quadrilateral plate is feasible with available standard laparoscopic instruments. Moreover, plate osteosynthesis could be performed endoscopically. Further research on reduction techniques is necessary when planning to implement this technique into a clinical scenario.Dislozierte Frakturen des Beckens werden üblicherweise über offene chirurgische Zugänge osteosynthetisch versorgt. Die zugangsbedingte Morbidität beträgt dabei nach Literaturangaben bis zu 30%. Ziel dieser anatomischen Studie war die Machbarkeit einer endoskopischen Visualisierung der in der Beckenchirurgie wichtigen anatomischen Strukturen sowie die Durchführung einer komplett endoskopischen Plattenosteosynthese des Azetabulums mit vorhandenem laparoskopischen Standardinstrumentarium.An 4 anatomischen Ganzkörperpräparaten erfolgte die endoskopische Präparation des gesamten Beckenringes von der Symphyse bis zum Iliosakralgelenk. Dabei konnte die gesamte quadrilaterale Fläche bis hin zur Spina ischiadica mit dem N. ischiadicus dargestellt werden. Anschließend erfolgte eine komplett endoskopische Plattenosteosynthese entlang der Linea iliopectinea.Die endoskopische Präparation des Beckenringes und der quadrilateralen Fläche wird Schritt für Schritt dargestellt, gefolgt von einer komplett endoskopischen Osteosynthese entlang der Linea iliopectinea. Endoskopische, radiografische sowie schematische Darstellungen illustrieren die Technik.Die komplett endoskopische Präparation des Beckenringes und der quadrilateralen Fläche inkl. Plattenosteosynthese ist mit dem vorhandenen Standardinstrumentarium möglich. Bevor eine Implementierung in die klinische Versorgung erfolgen kann, müssen allerdings insbesondere Fragen zu Repositionsmöglichkeiten weiter untersucht werden.

Osteosynthesis has evolved theoretically and practically throughout its evolution. Similar to trends in other surgical fields, surgical techniques in fracture fixation, such as minimally invasive plate osteosynthesis (MIPO), have moved from large dissections to more tissue sparing methods. These plating techniques have been developed for a variety of bones, but more universal clinical adoption will rely upon improved clinical outcomes. The current review will describe minimally invasive techniques, evaluate their rationale, and summarize evidence for their efficacy.

To evaluate the methods and the outcomes of Gustilo type III open distal tibial and tibial shaft fractures with severe anterior and medial soft-tissue injuries, treated with posterolateral minimally invasive plate osteosynthesis (MIPO) technique. From May 2015 to May 2016, 10 patients with Gustilo type III open distal tibial and tibial shaft fractures with severe anterior and medial soft-tissue injuries (Gustilo–Anderson classification IIIA, 6; IIIB, 4) were treated with staged protocol using posterolateral minimally invasive plate osteosynthesis (MIPO) technique. The initial wound lavage, debridement, and application of a spanning external fixator were performed within 24 h and the mean interval from injury to definitive surgical treatment was 12.8 (range 4–21) days. An additional bone graft was performed in two patients when definitive internal fixation was performed. All patients were followed to union. Postoperative radiographs, postoperative complications, bone union, ankle joint motion, and limb functional outcome information of AOFAS ankle–hindfoot score were recorded. The mean follow-up period was 17.8 (range 12–26) months. The mean interval to bony union was 25.8 (range 20–40) weeks. Bone union was achieved in all cases. There were no complications, such as incision breakdown, deep infection, or impingement of the flexor hallucis longus tendon. The average AOFAS score was 90 (range 83–96). In ten patients, two patients had a superficial wound infection and another one patient showed a 6° varus deformity. Staged treatment using MIPO technique through a posterolateral approach is a reasonable and safe treatment option for open distal tibial and tibial shaft fractures, especially Gustilo type III with severe anterior and medial soft-tissue injuries. However, it should have a higher level of research evidence in more patients to confirm the safety of the clinical application of this technique.

Background: For minimally invasive percutaneous plate osteosynthesis (MIPPO) techniques applied to fractures of the lateral malleolus, there is no external guide for inserting the plate, determining the incision, and inserting the screws as used for fractures in other regions. With MIPPO, fluoroscopy exposure is unavoidable. The MIPPO technique is advantageous for patients; however, the unavoidable problem with this method for the surgical team is repeated exposure to fluoroscopy. To expose the surgical team to least radiation, we used a novel technique with an equal-sized plate as an external guide. We present the results of patients treated with this technique. Methods: Patients with isolated lateral malleolar fracture who underwent MIPPO using an equal-sized anatomical lateral malleolar plate as an external guide were retrospectively investigated. VAS scores on postoperative day 1 and AOFAS scores at final evaluation were noted. Results: Twenty-six patients were included in the study. Mean ± SD follow-up was 42.46 ± 14.11 months. Mean ± SD VAS score on postoperative day 1 was 3.76 ± 2.58. On final evaluation, prominent implant was identified in two patients, with mean ± SD AOFAS score of 98.00 ± 2.17. No other complications were observed. Conclusions: Using an equal-sized plate as external guide may ensure less use of fluoroscopy while determining the incisions. Until an external guide is produced commercially for minimally invasive fixation of lateral malleolar fractures, this method ensures determination of incisions and insertion of screws without requiring the use of fluoroscopy and may be reliably used for minimally invasive surgery.

Background Performance skills of a surgeon for a specific surgical technique range from 1 (novice) to 5 (expert). Mentoring can bring the surgeon to level 3. Simple experience rarely allows achievement of level 5, in contrast to deliberate practice, in which performance skills are improved by setting learning goals based on feedback about the trainee's previous performance. Hypothesis When learning a technique for the internal fixation of distal radius fractures, the level of performance skills achieved is higher with deliberate practice than with mentoring or simple experience. Material and methods Four surgeons each performed minimally invasive plate osteosynthesis (MIPO) of 15 distal radius fractures. The procedures were recorded by an HD camera. The first five fractures (step 1) were treated after mentoring, the next 5 fractures after reading an article and viewing a reference video (step 2), and the last 5 fractures after viewing and commenting 20 short videos highlighting possible errors (step 3). Each recording of the procedures performed by the surgeons was scored using the Objective Structured Assessment of Technical Skills (OSATS, 10 items on basic skills [B] and 10 on MIPO-specific skills [S]). Results For the basic skills, the mean OSATS scores (on 50) were 31 for step 1, 31 for step 2, and 43 for step 3. For the specific skills, the mean OSATS scores (on 50) were 25 for step 1, 29 for step 2, and 48 for step 3. For overall skills (B + S), the mean OSATS score (on 100) was 56 for step 1, 60 for step 2, and 91 for step 3. Discussion Our study confirms that the deliberate practice teaching method is more efficient in improving surgeon skills than simple experience. Deliberate practice consists of four essential steps: (i) setting a well-defined goal; (ii) being motivated to improve one's performance; (iii) receiving immediate feedback; and (iv) having multiple opportunities to repeat and gradually perfect one's performance. Our main hypothesis was verified, since the results of learning a MIPO technique, as assessed using the OSATS scale, were significantly better with a video-assisted deliberate practice technique than with mentoring or simple experience. Conclusion Video-assisted deliberate practice deserves to be widely used in order to optimise learning curves and to improve risk management in surgery. Level of evidence III.

Displaced acetabular fractures usually require open surgical approaches. Aim of this cadaver study was to evaluate a laparoscopic approach to prepare the anterior acetabular column and the quadrilateral plate in analogy to the laparoscopic pelvic lymphadenectomy. The laparoscopic preparation and anatomy is presented and illustrated step by step in a human cadaver followed by a modular plate osteosynthesis of the anterior column involving the quadrilateral plate is performed via a minimally invasive approach using standard laparoscopic instruments. In conclusion we could demonstrate that the laparoscopic preperitoneal preparation of the acetabulum according to the laparoscopic pelvic lymphadenectomy provides more free range for the surgical instruments compared to a previously described total extraperitoneal approach. The development of specific reduction tools and implants is under investigation. Until then, at least the laparoscopic preparation could be introduced in the clinical setting in the near future. Type of study Technical note – Cadaver study.

Background. The ideal treatment of distal tibial extra articular fractures remains controversial. Minimally invasive percutaneous plate osteosynthesis and intramedullary nailing are the two most commonly used methods. We did a prospective randomized controlled study to assess the functional outcome of distal tibial extra articular tibial fractures by comparing these treatment methods. Materials and methods. Sixty patients with distal tibial extra articular fractures were randomly assigned to an IMN (intramedullary nailing) group and a MIPPO (minimally invasive percutaneous plate osteosynthesis) group. All patients were followed up for a period of one year. At final follow-up, clinical and radiological outcome was assessed by foot function index. Malunion, infection, implant removal, time to union and secondary interventions were compared between the two groups. The comparison of continuous variables was performed by using the Student t-test or Mann-Whitney U test in accordance with normality testing. A value of p less than 0.05 was considered statistically significant. Results. All patients were followed up for a period of one year. Time to callus formation was equal in both groups. There was no non-union in our series. Malunion was more common in the nailing group. The foot function index was similar in both groups. Conclusion. MIPPO and intramedullary nailing are effective treatment options in the management of distal tibial extra particular fractures, with comparable functional outcomes.

Background Currently Minimally Invasive Plate Osteosynthesis (MIPO) technique for tibial shaft fracture management has gained wide attention. However, an increased intracompartmental pressure after the plate insertion may result in postoperative acute compartment syndrome. We reported the difference of immediate effect of percutaneous plate insertion using 2 approaches of MIPO technique on anterior compartment pressure of the legs. Materials and methods Eight soft cadaveric legs (one female and three males) without previous history of skeletal trauma or surgery were infused with normal saline to create the sustained intracompartmental pressure of 20 mm Hg in all four compartments. The Synthes® 4.5 mm 11-hole Narrow Locking Compression Plate was inserted via anteromedial and anterolateral approach. Anterior compartment pressure was measured by portable digital monitoring device through side-port needle (Stryker® Intracompartmental Monitoring Device) before and after plate insertion for each approach. Results By using anteromedial approach, a mean of anterior compartment pressure was increased by 0.375 mm Hg after plate insertion (5 of 8 legs had no change in pressure and the remaining 3 resulted in 1 mm Hg pressure elevation). For anterolateral plate insertion, all of the 8 legs had an elevation of anterior compartment pressure with a mean of 3.5 mm Hg (ranged from 2 to 6 mm Hg). Conclusions When both approaches were compared to each other, the anterolateral plate insertion resulted in higher intracompartmental pressure elevation of the anterior compartment than the anteromedial approach. Surgeon should be more aware of acute compartment syndrome when considering the anterolateral approach in treating close tibial fracture. However, in patients with suspected acute compartment syndrome, close observation and continuous monitoring of the intracompartmental pressure is still imperative for all healthcare provider.

Background The study purpose is to evaluate the working length, proximal screw density, and diaphyseal fixation mode and the correlation to fracture union after locking plate osteosynthesis of distal femoral fractures using bridge-plating technique. Methods A four-year retrospective review was performed to identify patients undergoing operative fixation of distal femur fractures with a distal femoral locking plate using bridge-plating technique for the metadiaphyseal region. Primary variables included fracture union, secondary surgery for union, plate working length, and diaphyseal screw technique and configuration. Multiple secondary variables including plate metallurgy and coronal plane fracture alignment were also collected. Results Ninety-six patients with distal femur fractures with a mean age 60 years met inclusion criteria. None of the clinical parameters were statistically significant indicators of union. Likewise, none of the following surgical technique parameters were associated with fracture union: plate metallurgy, the mean working length, screw density and number of proximal screws and screw cortices. However, diaphyseal screw technique did show statistical significance. Hybrid technique had a statistically significant higher chance of union when compared to locking (p = 0.02). All proximal locking screw constructs were 2.9 times more likely to lead to nonunion. Conclusions Plating constructs with all locking screws used in the diaphysis when bridge-plating distal femur locking plates were 2.9 times more likely to incur a nonunion. However, other factors associated with more flexible fixation constructs such as increased working length, decreased proximal screw number, and decreased proximal screw density were not significantly associated with union in this study.

Background Implant breakage after the fixation of traumatic fractures is rare; however, when it occurs, it is debilitating for the patients and a challenge for surgeons. The purpose of this study was to analyze and identify the independent risk factors for implant breakage of traumatic fractures treated with plate osteosynthesis. Methods We reviewed the medical records of patients with a fracture to any part of their four extremities, clavicle, hand or foot, who underwent surgical plate osteosynthesis from January 2005 to January 2015, and who sustained a subsequent implant breakage. Kaplan–Meier univariate and multivariate Cox regressions were performed to identify independent associations of potential risk factors for implant breakage in this cohort. Results We identified 168 patients who underwent plate osteosynthesis surgery and had subsequent internal fixator breakage. The mean patient age was 40.63 ± 16.71 years (range, 3 to 78 years), with 72.0% (121) males and 28.0% (47) females. The average time between surgery and implant breakage was 12.85 ± 12.42 months (range, 1 to 60 months). In the final regression model, we show that inserting screws close to the fracture line is an independent predictive risk factor for implant breakage (HR, 2.165, 95%CI, 1.227 to 3.822; P = 0.008). Conclusions We found that inserting screws close to the fracture line is related to an increased risk of internal fixator breakage in patients treated with plate osteosynthesis after fracture. Plates with additional holes likely lead to an increased risk of implant breakage, presumably because surgeons cannot resist inserting extra screws into the holes adjacent to the fracture line, which reduces the stiffness of the plate. We have addressed this problem by designing a plate without holes adjacent to the fracture line.

This study aims to introduce a self-designed clavicle reductor and to test the effectivity of a alternative minimally invasive plate osteosynthesis technique (MIPO) for displaced midshaft clavicular fractures (DMCFs) with the application of our self-designed clavicle reductor. From October 2012 to February 2013, 27 male patients who suffered with unilateral displaced midshaft clavicular fracture (DMCFs) were included into our study. Patients were treated by minimally invasive plate osteosynthesis (MIPO) technique with the application of our self-designed clavicle reductor and followed up regularly. Constant-Murley score was employed to test the functional outcomes at one year’s follow up. The average follow-up time for the 27 patients was 15.8 months (range, 13–18 months). The average age of all patients was 32.6 (range, 21 to 48). According to OTC system, 12 cases were simple fractures (15-B1), ten cases were wedge fractures (15-B2) and five cases were comminuted fractures (15-B3). With the application of the clavicle reductor, minimally invasive plate osteosynthesis technique can be performed without any barrier in all of the 27 cases. Operative duration was 48.1 minutes (range, 35–65 minutes) and average fluoroscopy time was 12.8 seconds (range, from 7 to 22 seconds). All of the 27 cases healed from four to six months post-operatively. The average Constant-Murley-score of the 27 patients was 92.7 ± 5.88 (range, 80 to 100). No complications were noted. The self-designed clavicle reductor can effectively pave the way for the application of MIPO technique in the treatment of DMCFs. MIPO technique with locking reconstruction plate is a feasible and worthwhile alternative for displaced midshaft clavicular fractures (DMCFs).

Objectives: The aim of the present study was to evaluate results, including clinical and radiological outcomes and number of complications, following minimally invasive plate osteosynthesis (MIPO) of proximal humerus fractures, using the PHILOS® proximal humerus internal locking system (Synthes Holding AG, Solothurn, Switzerland). Methods: Retrospectively evaluated were 31 patients treated with MIPO (12 male, 19 female; average age: 58.4 years). Four patients had 2-part fractures, 14 patients had 3-part fractures, and 13 patients had 4-part fractures, according to Neer classification. Healing, complications, and head-shaft angle (HSA) were radiographically evaluated. Clinical outcomes were assessed at 1-year follow-up with Constant score. Results: Average Constant scores for fractured and normal shoulders were 73.2 ± 10.9 and 84.8 ± 5.1, respectively. Varus progression, fracture type, and age had no significant effect on functional outcome. Average postoperative and follow-up HSA's were 130.80 ± 7.70 and 128.80 ± 10.00, respectively. Significant varus progression was observed during follow-up (p = 0.01). Varus progression was more prominent in patients with postoperative HSA

This study evaluated the optimal anatomical locking plate position using three-dimensional printed models of the clavicle. Three-dimensional models of the fractured clavicle were reproduced from seventeen patients who underwent minimally invasive plate osteosynthesis (MIPO) procedures. The fracture location—the percentage of the distal fragment length compared to the entire clavicle—ranged from 30–44%. We evaluated four commercially available plate systems for position and fitting with the bone. After reducing the fracture on each three-dimensional model, we determined the optimal plate and its position. The anatomical plate fitted well when positioned in the middle of the clavicle for a fracture location ranging from 40 to 60%. When the fracture location was 30–40%, the anatomical plate fit well onto the bone model only in 36% of clavicles; otherwise, the reversed position of the anatomical plate or the lateral plate fit well. The anatomical plate was found to be unsuitable when the fracture location was less than 30%; in this case, the lateral plate was the best fit. Fitting the anatomical plate in MIPO for clavicle fractures depends on the fracture location. This can help surgeons determine the optimal plate for clavicle MIPO.

Aim The aim of this study was to describe a new, closed, arthroscopically-assisted reduction of posterolateral tibial plateau fractures with minimally invasive plate osteosynthesis using a plate pre-contoured over a 3D-model based on a CT-scan of the injured tibial plateau and positioned by using a minimal anterolateral approach. Methods A five to six centimeter long curvilinear incision was made over the Gerdy's tubercle. After subcutaneous dissection, the fascia was incised, the ileo-tibial band was split, and the dissection was extended posteriorly. The knee was flexed to 90° and the space between the fibular collateral ligament and the posterolateral plateau rim (para-FCL space) was created. A variable-angle locking compression plate contoured on a 3D-model was inserted flush to the tibial plateau rim. Two cortical screws were placed to ensure support under the area of depression as far posteriorly as possible. Two additional screws were implanted, and a cortical screw was used for the most anterior screw hole. The custom pre-contoured plate based on a person-specific 3D-model, associated with arthroscopy reduction, provides a supporting and containing effect to the posterolateral periarticular fragments and allows a minimally invasive plate osteosynthesis fixation to be performed. This guarantees a proper reduction and fixation without the described limitations and risks associated with the classic approaches. Conclusions This approach should be considered to treat fractures of the posterolateral plateau, isolated or associated with medial tibial plateau fractures, as it could improve the outcome in terms of lower associated risks, better reduction and fixation, and faster and improved patient recovery.

Sternal fracture is a common complication of chest trauma but has a low incidence. Various treatments have been developed to reconstruct sternal fractures. Among these approaches, analgesia, corset fixation, and open reduction with plate internal fixation have been suggested. The use of newly developed minimally invasive plate osteosynthesis is a feasible method. In this study, we report a case involving a 54-year-old man with a sternal fracture accompanied by bilateral pleural effusion and a small amount of right-sided pneumothorax. The patient was treated with minimally invasive plate osteosynthesis. The operation was successful and the postoperative recovery was good. No pneumothorax or complications such as chest pain, paresthesia, or wound infection were observed at the 1-year follow-up visit. Additionally, the bilateral pleural effusion had been completely absorbed. The incision in the lower chest was aesthetic and minimally traumatic. This case describes a novel method for internal fixation of sternal fractures.

Inter-implant fractures are associated with reduced quality of life and increased 1-year mortality. For that reason, we propose, instead of treating, a novel, preventative surgical approach that involves splinting the inter-implant femoral shaft interval. In patients with a previous femoral implant in whom a second surgery for new material implantation was necessary (including knee or hip arthroplasty, plate or femoral nailing), an overlapping technique using the minimally invasive plate osteosynthesis technique was performed during the second surgery. Nine patients were included, all females with median (range) age of 78 (55–88) years. No surgery-related complications or mortality occurred. Two patients suffered fractures from a casual fall postoperatively with no implant failure or hospital admission required. In conclusion, instead of treating such fractures after they occur, we propose an effective, safe and reproducible preventative surgical approach, not previously reported, which involves internal femoral splinting, a plate and the minimally invasive plate osteosynthesis technique.