Search

This cross-sectional study aimed to classify the radiographical characteristics of impacted maxillary canines that were surgically exposed following orthodontic traction and to find out which factor is most closely related to traction duration. This study enrolled 74 patients with 87 maxillary canines. Cone-beam computed tomography images, panoramic radiographs, and medical records were analyzed. Cystic-appearing lesion and resorption of adjacent roots were observed in 26.4% and 23.0% of cases, respectively. Impacted maxillary canines were mostly distributed in the lateral incisor area. The mean (± standard deviation) traction duration for the 47 teeth that met the study criteria was 13.9 (± 8.9) months. Impacted maxillary canines treated with surgical exposure and orthodontic traction showed increasing possibilities of palatal impaction and resorption of the adjacent root as they were located mesially (p r = 0.519, p

The computer-aided design/computer-aided manufacturing (CAD/CAM) virtual orthodontic system produces customized brackets, indirect bonding jigs, and archwires based on a three-dimensional virtual setup. In surgical cases, this system helps to visualize the final occlusion during diagnosis and to efficiently plan individualized presurgical orthodontic treatments. A 20-year-old female patient with a skeletal Class III malocclusion, maxillary protrusion, and lip protrusion was successfully treated with orthognathic surgery and orthodontic treatment with maxillary first premolar extractions. The CAD/CAM system was applied for efficient treatment, with a total active treatment time of 16 months. In this case report, the applicability of the CAD/CAM virtual orthodontic system for orthognathic surgery cases is demonstrated. Suggestions are also made to overcome the limitations and to maximize the advantages of this system during orthodontic treatment of patients undergoing orthognathic surgery.

Introduction. Studies on the pharyngeal airway space (PAS) changes using three-dimensional computed tomography (CT) have shed more light on patients with Class III than Class II malocclusion. This paper focuses on analyzing the long-term changes in the PAS and evaluating the postoperative association between these PAS and skeletal changes in patients with skeletal Class II malocclusion who have undergone orthognathic surgery. Methods. The records of 21 patients with skeletal Class II malocclusion who had undergone orthognathic surgery were included. The anatomical modifications in both jaws, changes in volume, sectional area (SA), minimum sectional area (MSA), and anterior-posterior (AP) and transverse (TV) width in the airway at one month before surgery ( T 0 ), and one month ( T 1 ) and one year ( T 2 ) after surgery were analyzed using CT images. The association between the skeletal and airway changes was evaluated between T 0 , T 1 , and T 2 . Results. After surgery, the ANS, A point, and PNS demonstrated significant posterior and superior movement. The B point and the pogonion exhibited substantial anterior and superior movement. The total and inferior oropharyngeal volumes (vol 3, vol 4) notably increased, while the nasopharyngeal volume (vol 1) decreased. The anterior-posterior movement at the ANS and PNS after surgery was significantly associated with the total volume, vol 2, vol 3, SA 1, MSA, and TV width 1, while substantial association with the total volume was found at the pogonion. Conclusion. Thus, an ideal treatment plan can be formulated for patients with skeletal Class II malocclusion by considering the postoperative PAS changes.

Compliance with a mandibular advancement device is important for the optimal treatment of obstructive sleep apnea. Recent advances in information and communication technology-based monitoring and intervention for chronic diseases have enabled continuous monitoring and personalized management. Self-evaluation and self-regulation through objective monitoring and feedback may improve compliance. The aim of this study was to evaluate the effects of information and communication technology-based remote monitoring and feedback services, using a smartphone application, on the objective compliance with a mandibular advancement device in patients with obstructive sleep apnea. Forty individuals who were diagnosed with obstructive sleep apnea by polysomnography were randomly assigned to groups A and B. During an initial 6-week evaluation period, the mandibular advancement device-wearing time was monitored with the smartphone application in group B, but not in group A. The two groups then switched the monitoring procedures during the second 6-week period (the smartphone application was then used by group B, but not by group A). If no input data were indicated on the cloud server of the smartphone application during the monitored period, push notifications were provided twice daily. Objective compliance, monitored by a micro-recorder within the mandibular advancement device, was noted and compared based on whether the monitoring service was provided. The number of mandibular advancement device-wearing days was significantly higher in the monitored period than in the unmonitored period. The mandibular advancement device-wearing time did not differ significantly between the two groups. In conclusion, information and communication technology-based remote monitoring and feedback services demonstrated a potential to increase the objective measures of compliance with mandibular advancement devices.

The positional accuracy of bracket placement planned through tooth setup vs actual placement was evaluated by means of conventional thermoplastic indirect bonding trays and customized 3D-printed indirect bonding trays.A total of 280 bracket positions placed on the crowns of 10 dental plaster models were evaluated. The manual setup method and a thermoplastic indirect bonding tray were used for the manual group. For the CAD/CAM group, the bracket was positioned using a digital setup and a corresponding 3D-printed tray. The positional accuracy of the bracket placement on the duplicated gypsum model using the trays was evaluated by means of 3D software. Six errors of bracket position (height, depth, mesiodistal, torque, rotation, and tip errors), including linear and angular errors, were measured. Differences in variables were compared across subgroups using the independent t test or the Mann-Whitney U test.Only the height error differed significantly (P0.05) between groups (manual: 0.2 mm; CAD/CAM: 0.12 mm). For both incisors and molars, the manual group showed significantly greater height errors than the CAD/CAM group (P0.05). The analysis of variance of the position error to the whole bracket showed statistically significant differences between tooth positions, linear measurements, and angular measurements (P0.05).A 3D-printed indirect bonding tray showed accuracy similar to that of conventional methods for bracket placement, with slightly greater bracket height accuracy. Further studies should strive to improve accuracy in terms of tooth positions.

In this study, we aimed to evaluate and compare the bracket positioning accuracy of the indirect bonding (IDB) transfer tray fabricated in-clinic using the tray printing (TP) and marker-model printing methods (MP).The TP group was further divided into 2 groups (single-tray printing [STP] and multiple-tray printing [MTP]) depending on the presence of a tray split created using the 3-dimensional (3D) software. Five duplicated plaster models were used for each of the 3 experimental groups, and a total of 180 artificial teeth, except the second molar, were evaluated in the experiment. The dental model was scanned using a model scanner (E3; 3Shape Dental Systems, Copenhagen, Denmark). Virtual brackets were placed on facial axis points, and the IDB trays were designed and fabricated using a 3D printer (VIDA; EnvisionTEC, Mich). The accuracy of bracket positioning was evaluated by comparing the planned bracket positions and the actual bracket positions using 3D analysis on inspection software. The main effects and first-order interaction effects were analyzed together by analysis for the analysis of variance.The mean distance and height errors were significantly lower in the STP group than those in the MP and MTP groups (P 0.05). The mean distance error was 0.06 mm in the STP group and 0.09 mm in the MP and MTP groups. The mean height error was 0.10 mm in the STP group and 0.15 mm and 0.18 mm in MP and MTP groups, respectively. However, no significant differences were observed in the angular errors among the 3 groups.The in-office-fabricated IDB system with computer-aided design and 3D printer is clinically applicable after considering the linear and angular errors. We recommend IDB trays fabricated using the STP method owing to the lower frequency of bracket positioning errors and ease of fabrication.

To elucidate genetic factors affecting orthodontic treatment duration, we employed targeted next-generation sequencing on DNA from the saliva of 117 patients undergoing orthodontic treatment after premolar extraction. The clinical characteristics of patients were summarized, and the association of clinical variables with treatment duration was assessed. Patients whose treatment duration deviated from the average were classified into an extreme long group or an extreme short group. We identified single nucleotide polymorphisms (SNPs) significantly enriched in the two groups via targeted sequencing. Nine SNPs (six genes) were significantly enriched in both groups. In the extreme long group, the frequency of the CC genotypes of WNT3A, SPP1 (rs4754, rs9138), and TNFSF11, the TT genotype of SPP1 (rs1126616), as well as the GG genotype of SFRP2 was significantly higher than in the short group. In the extreme short group, the TC genotype of SPP1, the AA genotype of P2RX7, the CT genotype of TNFSF11, and the AG genotype of TNFRSF11A tended to exhibit higher frequency than in the long group. Taken together, we identified genetic polymorphisms related to treatment duration in Korean orthodontic patients undergoing premolar extraction. Accurate prediction of the treatment period through further research will be of great aid to patients as well as orthodontists.

Objectives To date, the clinical stability of dual-thread orthodontic miniscrews has not been studied. This study aimed to compare the primary stability and long-term clinical success rate of dual-thread and cylindrical orthodontic miniscrews and to examine the association between various clinical factors and the success rate of miniscrews. Materials and Methods A total of 145 cylindrical and 135 dual-thread miniscrews were inserted in the maxillary and mandibular buccal alveolar areas of 142 patients. The torque and Periotest (Siemens, Bensheim, Germany) values were recorded during insertion and removal. The effect of clinical variables such as sex, age, screw design, jaw, side of placement, root proximity, and site of placement on the success rate was examined using logistic regression analysis. Results There was no statistically significant difference (P = .595) in the overall clinical success rate between the two designs, with an overall success rate of 82.1% and 84.4% for the cylindrical and dual-thread miniscrews, respectively. Age and screw-root proximity were significantly associated with failure (P < .05). Conclusions The dual-thread miniscrews did not show superior long-term stability and clinical success rate as compared with the cylindrical miniscrews. The results of this study suggest that patient age and screw-root proximity influence the clinical success rate of miniscrews.

Objective Maxillary anterior segmental distraction osteogenesis (MASDO) for cleft and palate patients is the alternative treatment option to correct malocclusion with maxillary arch deficiency and severe crowding. After MASDO, prosthetic considerations are crucial for patients with cleft lip and palate because it is related to facial esthetics and occlusal function. The objectives of this study were to investigate the final restoration type for created alveolar space by MASDO. Methods Thirteen patients with cleft lip and palate who underwent MASDO and orthodontic treatment from the years 2000 to 2010 in Yonsei University were examined. Final restorations are classified as dental implants, conventional prosthesis, and orthodontic space closure. The relationship between the distracted areas and final restoration type was investigated. The authors evaluated lateral cephalograms obtained at predistraction osteogenesis (pre-DO; T1), postdistraction osteogenesis (post-DO; T2), and debond (T3), and measured changes from T1 to T2 and from T2 to T3. Results There was no significant difference of final restoration percentage of dental implants, conventional prosthesis, and space closure with orthodontic treatment. However, dental implants and conventional prostheses were applied more frequently in the posterior area and in the anterior area, respectively. The relapse rate was observed as 36.7% and 22.4% in the values of N-A distance and ANB angulation in T2-T3 stage. Conclusion The MASDO site should be decided, based on final restoration goal. Among the created alveolar spaces, implants were applied mainly to the posterior site and the conventional prostheses were mostly restored to the anterior site. For space closure by orthodontic approach, the area could be both anterior or posterior.

ObjectiveThe purpose of this study was to evaluate the effects of miniscrew insertion angle and vertical facial type on the interradicular miniscrew-root distance available for molar distalization.Materials and methodsCone-beam computed tomography images of 60 adults with skeletal Class I occlusion exhibiting hyperdivergent (n = 20), normodivergent (n = 20), and hypodivergent (n = 20) facial types were used. Placement of a 6-mm long, 1.5-mm diameter, tapered miniscrew was simulated at a site 4 mm apical to the cementoenamel junction, with insertion angles of 0°, 30°, 45°, and 60° relative to the transverse occlusal plane. The shortest linear distance between the miniscrew and anterior root at four interradicular sites was measured: maxillary second premolar and first molar (Mx 5-6), maxillary first and second molars (Mx 6-7), mandibular second premolar and first molar (Mn 5-6), and mandibular first and second molars (Mn 6-7).ResultsMiniscrew-root distance significantly increased as the insertion angle increased from 0° to 60°. In the mandible, the distances significantly differed among vertical facial types, increasing in the following order: hyperdivergent, normodivergent, and hypodivergent. The minimum mean distance was found in the Mx 6-7 (30°; 0.86±0.35 mm), and the maximum mean distance was found in the Mn 5-6 (60°; 2.64±0.56 mm). The rates of miniscrews located buccally outside the root distalization path were up to 70% and 55% when the miniscrews were placed at 60° insertion angles in the Mx 5-6 and Mn 5-6 regions, respectively.ConclusionsMiniscrew-root distance increased significantly with the increased insertion angle, and the amount of increase was affected by the miniscrew placement site and vertical facial type. To ensure adequate distalization of the posterior segment, the miniscrew should be inserted at an angle in the interradicular area between the second premolar and first molar.

The aim of this study was to investigate the level of satisfaction for orthodontic treatment among adult patients. In addition, the influencing host factors were monitored for their associations with satisfaction.A questionnaire was designed to measure the level of satisfaction in 10 items; overall satisfaction, tooth alignment, facial appearance, eating and chewing, confident smile and self-image, retention state, treatment duration, treatment costs, intention to recommend, and relief of previous concerns, using a 5-point Likert scale. Total satisfaction was calculated by averaging the Likert scores from the 10 items. The survey was conducted, and the results from 298 adults were evaluated.For the overall satisfaction item, 45.0% were very satisfied, and 39.9% were satisfied, resulting in a satisfaction ratio of 84.9%. Total satisfaction score was 3.9. The level of satisfaction for tooth alignment and confident smile and self-image were significantly higher than facial appearance and eating and chewing (P 0.001). Patients aged 50 and above were more satisfied than the younger ones, and men were more satisfied than women (P 0.05).Overall, adult patients were highly satisfied with orthodontic treatment. Age, sex, motivation, expected concern, and discomfort influenced the level of satisfaction.

Summary Assessing changes in patient's psychological health and oral health-related quality of life (OHRQoL) over time during orthodontic treatment may help clinicians to treat patients more carefully. To evaluate changes in mental health, self-reported masticatory ability and OHRQoL during orthodontic treatment in adults, this prospective study included 66 adults (30 men, 36 women; mean age, 24·2 ± 5·2 years). Each patient completed the Korean versions of the State–Trait Anxiety Inventory, Zung Self-Rating Depression Scale, Rosenberg self-esteem scale, key subjective food intake ability (KFIA) test for five key foods and Oral Health Impact Profile-14 (OHIP-14K) at baseline (T0), 12 months after treatment initiation (T1) and debonding (T2). All variables changed with time. Self-esteem and the total OHIP-14K score significantly decreased and increased, respectively, at T1, with a particular increase in the psychological and social disabilities scores. There were no significant differences in any questionnaire scores before and after treatment. The total OHIP-14K score was positively correlated with trait anxiety and depression, and negatively correlated with self-esteem and KFIA at T0, regardless of the treatment duration. Older patients showed a significant increase in the total OHIP-14K score at T1 and T2. OHRQoL worsened with an increase in the treatment duration. Our results suggest that OHRQoL temporarily deteriorates, with the development of psychological and social disabilities, during orthodontic treatment. This is related to the baseline age, psychological health and self-reported masticatory function. However, patients recover once the treatment is complete.

Purpose Few studies have evaluated the relapse pattern of intraoral vertical ramus osteotomy (IVRO) for the correction of mandibular prognathism with a high angle. The aim of this study was to measure the association between vertical facial types (high and normal mandibular plane angle) and relapse after IVRO for the management of mandibular prognathism. Materials and Methods The retrospective cohort study sample (skeletal Class III patients) was divided into 2 groups according to the angle of the sella-nasion plane relative to the mandibular plane (SN-MP) at the initial examination. Lateral cephalograms were analyzed for the predictor (facial type) and outcome (cephalometric changes over time) variables before surgery, 7 days after surgery, and 12 months after surgery. The 2 groups were matched for sample size (n = 20 in each). Data were analyzed using repeated-measures analysis of variance with Bonferroni correction. Results The normal-angle group (group N, SN-MP from 27° to 37°) and high-angle group (group H, SN-MP >37°) were not significantly different in terms of gender and age at the initial examination. Seven days after surgery, the mandibles in group H moved 2.5 mm more superiorly than those in group N (P = .013); consequently, the amount of overbite correction in group H was approximately 2 mm greater than that in group N (P = .002). Nevertheless, 12 months after surgery, there was no statistically significant difference in relapse of the maxilla and mandible between the 2 groups. In the 2 groups, the mandible moved approximately 0.7 mm superiorly during retention. Conclusions These findings suggest that IVRO is a clinically acceptable and stable treatment modality for mandibular prognathism with a high angle.

The aim of this study was to evaluate differences in the maxillary sinus floor levels between adults with an anterior open bite and those without.This retrospective study included 30 subjects: 15 adults with an anterior open bite (mean age, 21.5 ± 4.3 years) and 15 control subjects with normal occlusion (mean age, 21.7 ± 3.1 years). Cone-beam computed tomography and lateral cephalograms were analyzed before treatment.The open-bite group exhibited a significantly greater maxillary posterior alveolar height (P 0.05). The craniocaudal heights of the maxillary sinus in the region between the first and second molars and between the second premolar and first molar were significantly greater in the open bite group (40.5 and 39.0 mm, respectively) than in the control group (36.7 and 34.7 mm, respectively; P 0.05 for both). The basal bone heights in the regions between the first and second molars, the second premolar and first molar, and the first and second premolars were significantly smaller in the open-bite group than in the control group (P 0.001 for all).Vertical pneumatization of the maxillary sinus floor in the region between the first and second molars and between the second premolar and first molar is greater in adults with an anterior open bite than in those without, whereas basal bone height in the maxillary posterior region is lower in the open-bite patients.

When considering camouflage orthodontic treatment for Class III malocclusion with skeletal facial asymmetry, it is crucial to preserve the favorable compensated posterior occlusion. Once the inclination of the compensated occlusion is changed during orthodontic treatment, unstable occlusion, such as crossbite or scissor bite may occur. A 23-year-old female patient had anterior spacing with Class III malocclusion and a mandibular asymmetry. A nonsurgical approach was adopted. The treatment objectives were to establish a Class I molar relationship with compensated inclination of the posterior dentition and to correct the midline deviation. To achieve these goals, the computer-aided design/computer-aided manufacturing (CAD/CAM) orthodontic system plus customized brackets was applied, and miniscrews were used to distalize the left mandibular dentition for midline correction. The results suggested that the CAD/CAM-based customized brackets can be efficiently used in camouflage treatment to achieve a correct final occlusion.

Introduction We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. Methods Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. Results Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. Conclusions The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Reduced food intake ability can restrict an individual's choice of foods and might have a significant impact on the individual's quality of life and mental health. The aim of this study was to evaluate the correlations between self-reported masticatory ability and oral health-related quality of life (OHRQOL) and psychological health. The study included 72 (26 men, 46 women) adults with a mean age of 26·4 ± 8·6 years. Each participant completed the key subjective food intake ability (KFIA) test for five key foods, the Korean version of the Oral Health Impact Profile-14 (OHIP-14K) and three questionnaires for measuring anxiety, depression and self-esteem. The participants were distributed into two groups by sex (a mean age of 23·9 ± 5·2 for men and 27·9 ± 9·8 for women) and by the median KFIA score. There were no significant differences in any of the variables according to sex. Thirty-two participants (12 men, 20 women) in the lower KFIA group had a higher total OHIP-14K (P < 0·001) and depression level (P < 0·05) than the 40 participants (14 men, 26 women) in the higher KFIA group. As the KFIA decreased, OHRQOL worsened (P < 0·001) and depression increased (P < 0·05). Participants with lower KFIA scores were more than 4·3 times as likely as to have a poor OHRQOL than the reference group (odds ratio, 4·348; 95% confidence interval, 1·554-12·170, P < 0·01). Lower subjective food intake ability is associated with a poor oral health-related quality of life and higher depression level.

Objective: To evaluate the stability of nonsurgical miniscrew-assisted rapid maxillary expansion (MARME) in young adults with a transverse maxillary deficiency. Materials and Methods: From a total of 69 adult patients who underwent MARME followed by orthodontic treatment with a straight-wire appliance, 20 patients (mean age, 20.9 ± 2.9 years) with follow-up records (mean, 30.2 ± 13.2 months) after debonding were selected. Posteroanterior cephalometric records and dental casts were obtained at the initial examination (T0), immediately after MARME removal (T1), immediately after debonding (T2), and at posttreatment follow-up (T3). Results: Suture separation was observed in 86.96% of subjects (60/69). An increase in the maxillary width (J-J; 1.92 mm) accounted for 43.34% of the total expansion with regard to the intermolar width (IMW) increase (4.43 mm; P < .001) at T2. The amounts of J-J and IMW posttreatment changes were −0.07 mm (P > .05) and −0.42 mm (P = .01), respectively, during retention. The postexpansion change in middle alveolus width increased with age (P < .05). The postexpansion change of interpremolar width (IPMW) was positively correlated with the amount of IPMW expansion (P < .05) but not with IMW. The changes of the clinical crown heights in the maxillary canines, first premolars, and first molars were not significant at each time point. Conclusions: Nonsurgical MARME can be a clinically acceptable and stable treatment modality for young adults with a transverse maxillary deficiency.

The authors hypothesized that an audiovisual slide presentation that provided treatment information regarding the removal of an impacted mandibular third molar could improve patient knowledge of postoperative complications and decrease anxiety in young adults before and after surgery. A group that received an audiovisual description was compared with a group that received the conventional written description of the procedure.This randomized clinical trial included young adult patients who required surgical removal of an impacted mandibular third molar and fulfilled the predetermined criteria. The predictor variable was the presentation of an audiovisual slideshow. The audiovisual informed group provided informed consent after viewing an audiovisual slideshow. The control group provided informed consent after reading a written description of the procedure. The outcome variables were the State-Trait Anxiety Inventory, the Dental Anxiety Scale, a self-reported anxiety questionnaire, completed immediately before and 1 week after surgery, and a postoperative questionnaire about the level of understanding of potential postoperative complications. The data were analyzed with χ(2) tests, independent t tests, Mann-Whitney U tests, and Spearman rank correlation coefficients.Fifty-one patients fulfilled the inclusion criteria. The audiovisual informed group was comprised of 20 men and 5 women; the written informed group was comprised of 21 men and 5 women. The audiovisual informed group remembered significantly more information than the control group about a potential allergic reaction to local anesthesia or medication and potential trismus (P.05). The audiovisual informed group had lower self-reported anxiety scores than the control group 1 week after surgery (P .05).These results suggested that informing patients of the treatment with an audiovisual slide presentation could improve patient knowledge about postoperative complications and aid in alleviating anxiety after the surgical removal of an impacted mandibular third molar.

The aim of this work was to analyse the stability of vertical height reduction genioplasty using biodegradable material, as well as to determine vertical changes of hard and soft tissues during this procedure. Forty patients underwent vertical height reduction genioplasty using two types of biodegradable fixation (Biosorb FX® or OSTEOTRANS-MX®), combined with mandibular setback surgery. We assessed lateral cephalographs over time (pre-operation; immediately post-operation; 3 months, 6 months and 12 months post-operation). We found a mean vertical difference of 0.22mm (standard deviation (SD)=0.49mm) at the menton point immediately post-operation, compared with 12 months post-operation. And there was no statistical significance(P>0.05). The chin hard tissue remained stable from the immediate post-operation period to 1 year post-operation, and the chin soft tissue remained stable from 3 months to 1 year post-operation. The regression equation describing the replacement of hard tissue with soft tissue change, between pre-operation and 12 months post-operation is y=0.590x+0.885 (R2=0.300, P

Based on three-dimensional scanning and computer-aided design and computer-aided manufacturing (CAD/CAM) techniques, customized bracket systems are increasingly used. However, data remain limited regarding customized bracket design, characteristics, and stability. This study was undertaken to evaluate the design, bond strength, and residual adhesives of four different CAD/CAM customized brackets that were attached to human tooth specimens by indirect bonding. Thirty extracted human upper premolars were divided into five groups: Group 1, preadjusted self-ligating labial metal bracket; Group 2, lingual self-ligating metal injection molding customized bracket; Group 3, gold-casted lingual customized bracket; Group 4, labial self-ligating milled customized bracket; Group 5, labial customized resin base bracket. Except in Group 1, premolar specimens were scanned via model scanner, and the images were sent to each manufacturing company to fabricate customized brackets and transfer trays/jigs. Debonding force (DF; N) was measured by Instron universal testing machine and shear bond strength (SBS; MPa) was calculated via dividing DF by bonding area. Adhesive remnants were analyzed via stereo microscopic images. Group 2 (196.90±82.75 N) exhibited significantly higher DF than Group 1 (62.77±12.65 N); other groups exhibited similar DFs, compared with Group 1. No customized bracket groups exhibited significant differences in SBS, relative to Group 1 (6.73±1.36 MPa). However, SBS in Group 5 (11.46±7.22 MPa) was significantly higher than in Group 3 (3.58±2.14 MPa). Group 3 had significantly lower ARI scores than other groups (P

Introduction The aim of this work was to compare the skeletal and dental outcomes of 1- versus 2-phase treatment in Class II subjects with difficult-to-treat high-angle severe Class II malocclusions. Methods The sample of 120 cases was collected from the private offices of 3 experienced clinicians. The following selection criteria were used: (1) ANB ≥6°, (2) SN-GoGn ≥37° or mandibular plane to Frankfort horizontal plane ≥30°; and (3) overjet ≥6 mm. Patients were classified into either the early or the late treatment group according to dental age (early Tx: ≥5 primary teeth; late Tx: otherwise). Thirty-four angular, linear, and proportional measurements were determined for each patient. Statistical significance was assessed with the use of a 2-tailed t test, analysis of covariance test, and chi-square test. Results The results showed that early 2-phase treatment for severe Class II high-angle patients offered no skeletal anteroposterior advantages over late 1-phase treatment. Severe high-angle Class II patients also showed similar dental anteroposterior outcomes with the use of both approaches. Vertically there was a higher frequency of increased mandibular plane angles and extrusion of upper incisors and lower molars in the late treatment group. Conclusions Early 2-phase treatment for severe Class II high-angle patients offered no skeletal or dental advantage over late 1-phase treatment.

Objective. We investigated the suitability of intraoral-scan models for measuring tooth dimensions and the amount of crowding in patients with severe tooth crowding. Materials and Methods. Fifty-eight patients who had undergone intraoral scans for diagnosis were included. Cast models were divided into two groups depending on the amount of crowding, as determined by initial caliper-based measurements (mild crowding [MC] group: 4.5 mm). Twenty maxillary models and 20 mandibular models were used in this study. For the three types of models (i.e., IS digital model, C cast model, and CS digital model), the reproducibility and the precision of linear measurements were evaluated. Results. We found that linear measurements made using digital calipers on a plaster model and on the relevant software were reproducible. There was no significant difference in most linear measurements between digital models and the C model. There were differences in the amount of crowding (p<.05), although these were not clinically significant. There was no relationship between the precision of crowding in the three types of models and the severity of crowding. Conclusions. Digital models can be used for measuring crowding in both mild and severe crowding cases. However, crowding measured by digital models tends to be lesser than that measured by cast models, and this should be considered during clinical application.

Objective. The aim of this study was to evaluate the morphological characteristics of the palatal rugae in Korean subjects to determine whether the palatal rugae can be used as an appropriate reference area for three-dimensional digital model superimpositions. Materials and Methods. In total, 343 patients (110 men, 233 women; mean age, 25.6±8.2 years) who had a digital model taken at their initial visit were included, and the numbers and types of right and left palatal rugae were investigated according to the primary, secondary, and fragmentary rugae. Finally, the differences in the positions of the third primary ruga were investigated according to the presence of additional rugae posterior to the third primary ruga. Results. The number of primary palatal rugae ranged from one to six, with 43.5% of the subjects having three primary rugae and 36.1% having four primary rugae; there were no significant differences between sexes. Except for the fragment rugae, the numbers of primary and secondary rugae were not significantly different between the left and right sides. The third primary ruga was located more significantly anteriorly when there was an additional ruga posterior to the third primary ruga (P < 0.001). Conclusions. The numbers of the palatal rugae vary greatly among individuals, and this affects the anteroposterior position of the third primary ruga. When the third primary ruga is located anteriorly, care should be taken when using it as a reference area for superimposition with a digital model before and after orthodontic treatment.

To obtain the balance and harmony of the soft tissue facial profile in orthodontic treatment, it is necessary to identify the characteristics of overlying soft tissues according to the horizontal and vertical skeletal patterns. The aim of this study was to evaluate the perioral soft tissue characteristics of skeletal Class II Division 1 subjects (group II) with various vertical patterns compared with skeletal Class I subjects (group I).Lateral cephalograms of 99 Korean adults (44 women, 45 men; mean age, 23.4 years) were divided into 4 groups based on horizontal and vertical skeletal pattern (SN-MP angle): group I, 22 subjects; group II-low angle (27°), 14 subjects; group II-normal angle (27°-36°), 33 subjects; and group II-high angle (37°), 30 subjects. The correlations and multiple linear regression tests were used to determine the skeletal and dental variables influencing soft tissue characteristics.Group II-high angle showed significantly greater values than did group II-low angle for basic lower lip thickness and lower lip length. The perioral soft tissue measurements of group II were correlated with the inclination and anteroposterior position of the maxillary and mandibular incisors along with facial depth (N-Go) and facial length (S-Gn). Upper lip strain of group II was not influenced by any skeletal variables but only by the inclination and anteroposterior position of the maxillary incisors.Clinicians need to evaluate lip strain and lip thickness based on the skeletal pattern as well as dental inclination to obtain balance in the perioral muscle activity.

This study evaluates the effect of recombinant human bone morphogenetic protein-2 (rhBMP-2) on the quality and quantity of regenerated bone when injected into distracted alveolar bone.Sixteen adult beagle dogs were assigned to either the control or rhBMP-2 group. After distraction was completed, an rhBMP-2 dose of 330 μg in 0.33 mL was injected slowly into the distracted alveolar crest of the mesial, middle, and distal parts of the alveolar bone in the experimental group. Histologic and microcomputed tomography analyses of regenerated bone were done after 2 and 6 weeks of consolidation.After 6 weeks of consolidation, the vertical defect height in the middle of the regenerated bone was significantly lower in the rhBMP-2 group (2.2 mm) than in the control group (3.4 mm) (P0.05). Additionally, the width of the regenerated bone was significantly greater in the rhBMP-2 group (4.3 mm) than in the control group (2.8 mm) (P0.05). The bone density and volume of regenerated bone in the rhBMP-2 group were greater than in the control group after 6 weeks of consolidation (P0.001).Injection of rhBMP-2 into regenerated bone after a distraction osteogenesis procedure significantly increased bone volume in the dentoalveolar distraction site and improved both the width and height of the alveolar ridge and increased the bone density.

Objective Premaxillary distraction osteogenesis was introduced using intraoral devices to correct maxillary hypoplasia and lengthen the alveolar bone horizontally in a patient with unilateral cleft lip and palate. Methods For premaxillary distraction osteogenesis, Le Fort I osteotomy was performed. Vertical osteotomy lines were located distally of the upper right canine and left first premolar to separate the anterior segment of the maxilla. After a 7-day latency period, distraction was allowed to continue for 20 days at a rate of 0.5 mm/d, followed by a 3-month consolidation period. After consolidation, orthodontic treatment and bilateral intraoral vertical ramus osteotomy were performed for the mandibular setback. The implant and prosthodontic treatments were applied to the alveolar ridge area created by the distraction osteogenesis. Results The A-point moved 8.0 mm forward during the distraction osteogenesis period, and the recurrence rate was 25% after the retention period. The transverse dimension of the upper arch was expanded during orthodontic treatment. The quality of the alveolar bone created by distraction osteogenesis was acceptable for the prosthodontic implant. Conclusions Premaxillary distraction osteogenesis and arch expansion is an effective treatment strategy, improving function, aesthetics, and stability for cleft patients with multiple missing teeth.

The aim of this study was to assess the association between malocclusion and oral health-related quality of life in young adults without orthodontic treatment, controlling for sociodemographic factors and common oral diseases.The sample consisted of 429 Korean patients (328 men, 101 women) 18 to 32 years of age. They completed the Korean version of the oral health impact profile-14 questionnaire and had a clinical examination, including an assessment with the index of orthodontic treatment need-dental health component. We collected sociodemographic information (age, sex, and education level) and evaluated other common oral diseases (decayed, missing, and filled teeth; periodontal health status; temporomandibular disorder; and oral soft tissue diseases).Multiple logistic regression analysis showed that patients requiring extensive orthodontic treatment were more than 2.7 times as likely to have poor oral health-related quality of life as the corresponding "no treatment needed" reference group (odds ratio, 2.74; 95% confidence interval, 1.60-4.59; P0.001). Severe malocclusion is significantly associated with functional limitations, physical pain, and social disability in young adults.Malocclusion is a key factor associated with poor quality of life caused by limited oral function, pain, and social disability in young adults.

We evaluated whether the biological activity of the surface of titanium, when stored in an aqueous solution after ultraviolet (UV) treatment, is comparable to that of the surface immediately after UV treatment. We subjected Grade IV titanium discs with machined surfaces to UV radiation for 15 min and then tested them immediately and after storage for 28 days, with and without distilled H2O (dH2O). We evaluated the surface characteristics using surface profiling, contact angle analysis, X-ray photoelectron spectroscopy, and in terms of the surface zeta-potential. We determined the level of biological activity by analysing albumin adsorption, MC3T3-E1 and human mesenchymal cell adhesion and cytoskeleton development, as well as the production of intracellular reactive oxygen species between groups. The surface characteristics produced by the UV irradiation were maintained in dH2O for 28 days. We found that titanium stored in dH2O for 28 days after UV treatment exhibited enhanced protein adsorption, cell attachment, and cytoskeleton development. Titanium stored in dH2O for 28 days after UV irradiation exhibited a lower level of oxidative stress, comparable to that of the titanium immediately after UV treatment. UV treatment combined with wet storage can be used as a means of overcoming the biological aging of titanium.

The aim of this study was to compare the virtual and manual tooth setups with digital and plaster models in extraction cases by measuring various occlusal parameters and applying the American Board of Orthodontics objective grading system.Linear intra-arch and interarch dimensions (arch width and length, perimeter, overjet, and overbite), angular variables (tip, torque, and rotation), and American Board of Orthodontics objective grading system scores obtained from a digital virtual setup model were compared with those from a plaster model setup.The digital virtual setup model resulted in smaller arch perimeters than did the plaster setup model by 2.20 mm in the maxillary arch (P 0.01) and 1.30 mm in the mandibular arch (P 0.05). The digital virtual setup also exhibited significantly lower values for overbite and overjet (P 0.01). The digital virtual setup had tendencies toward mesial angulation of the anterior teeth, labial inclination of the maxillary anterior teeth (P 0.05), and distal in-rotation of the mandibular teeth (P 0.05). The resulting American Board of Orthodontics objective grading system evaluation showed that larger deductions for overjet, occlusal contact, and total score (P 0.01) were required for the digital than for the manual setup model.Digital and manual setups lead to similar measurements for intra-arch and interarch occlusal variables. However, because of the possibility of collision on proximal and occlusal contact, delicate adjustments in proximal and occlusal contacts are required.

Objective: To compare soft and hard tissue responses based on the degree of maxillary incisor retraction using maximum anchorage in patients with Class II division 1 malocclusion. Materials and Methods: This retrospective study sample was divided into moderate retraction ( Results: There were 2.3 mm and 3.0 mm of upper and lower lip retraction, respectively, in the moderate group; and 4.0 mm and 5.3 mm, respectively, in the maximum group. In the moderate group, the upper lip was most influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.94). The lower lip was most influenced by posterior movement of B-point (β = 0.84) and the cervical point of the mandibular incisor (β = 0.83). Prediction was difficult in the maximum group; no variable showed a significant influence on upper lip changes. The lower lip was highly influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.50), but this correlation was weak in the maximum group. Conclusions: Posterior movement of the cervical point of the anterior teeth is necessary for increased lip retraction. However, periodic evaluation of the lip profile is needed during maximum retraction of the anterior teeth because of limitations in predicting soft tissue responses.

Introduction Several methods are available to enhance the precision of miniscrew placement. The use of surgical guides based on cone-beam computed tomography is indicated especially in patients with risky or difficult anatomic situations. The purpose of this study was to evaluate the accuracy of miniscrew placement by using surgical guides developed with computer-aided design and manufacturing techniques. Methods Miniscrews were placed in cadaver maxillae using stereolithographic computer-aided design and manufacturing techniques with assistance from surgical guides (surgical guide group, n = 25) or periapical x-rays (control group, n = 20). Insertion sites were selected using a 3-dimensional surgical planning program by fusing maxillary digital model images and cone-beam computed tomography images. Deviations between actual and planned placements were measured as 3-dimensional angular deviations and distance (coronal and apical) deviations. Results In the surgical guide group, the angular deviation was a median of 3.14° (range, 1.02°-10.9°), and the mesiodistal deviations in the coronal and apical areas were medians of 0.29 mm (range, 0.03-0.73 mm) and 0.21 mm (range, 0.03-0.97 mm), respectively. The deviations differed significantly between operators in the control group, but not in the surgical guide group. In the surgical guide group, there was no root damage from miniscrew placement, and 84% of the miniscrews were placed without contacting adjacent anatomic structures. In the control group, 50% of the miniscrews were placed between the roots ( P Conclusions Surgical guide accuracy was improved when digital model imaging was used. Miniscrews were placed more accurately when using surgical guides than when using a direct method.

Nongrowing adult patients with skeletal open bite have been considered among the most difficult to treat. This case report describes the surgical-orthodontic treatment of a blind 20-year-old woman who presented with skeletal class II malocclusion with vertical maxillary excess, anterior open bite, and transverse maxillary deficiency.After the transverse maxillary deficiency was corrected with miniscrew-assisted rapid palatal expansion, Le Fort I osteotomy with anterior segmental osteotomy and bilateral sagittal split ramus osteotomy with advancement genioplasty were used to correct the vertical maxillary excess and the anterior open bite. The patient's facial appearance was markedly improved, and she achieved a functional and stable occlusion after these treatments.This case report demonstrates the efficiency of miniscrew-assisted rapid palatal expansion for a patient with transverse maxillary deficiency and the benefit of a team approach using effective orthodontic mechanics in orthognathic surgery to correct a severe dentofacial deformity.

The aim of this retrospective cohort study was to investigate the factors contributing to mandibular relapse after intraoral vertical ramus osteotomy (IVRO) while controlling for possible confounders. Forty-seven patients who underwent bimaxillary surgery were divided into three groups according to the direction of horizontal mandibular relapse: a stable group (group S), a posterior relapse group (group P), and an anterior relapse group (group A). Lateral cephalograms were analysed 1 month before and at 7 days and 12 months after surgery. One month before surgery, the pogonion in group A was positioned about 13 mm more anteriorly than in group P (P

In nongrowing patients with skeletal Class II malocclusion, premolar extraction or maxillary molar distalization can be used as camouflage treatment. Orthodontic miniscrew implants are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient's cooperation. This article reports on maxillary molar distalization by using miniscrew implants to correct a Class II problem. The main considerations of molar distalization treatment with miniscrew implants are discussed.

Introduction: The purposes of this study were to evaluate the location, nature, and occurrence of incidental findings in maxillofacial structures on 3-dimensional cone-beam volumetric scans done for dental diagnostic purposes and to look for associations between these findings and symptoms in orthodontic patients. Methods: Images from 500 consecutive maxillofacial 3-dimensional scans were examined. The patient sample consisted of 252 orthodontic patients, 172 implant patients, 33 endodontic patients, 34 temporomandibular joint (TMJ) disorder patients, and 10 others. Results: The overall rate of incidental findings was 24.6% (123 patients of 500). The highest rate of incidental findings was in the airway area (18.2%), followed by TMJ findings (3.4%), endodontic findings (1.8%), and others (1.2%). In the orthodontic group, the incidences were airway findings, 21.4%; TMJ findings, 5.6%; and endodontic lesions, 2.3%. Only 22% of the airway findings, such as mucosal thickness, polyps, and retention cysts, were correlated with clinical signs and symptoms. Conclusions: For clinical diagnosis, the data should be interpreted with a full history of clinical signs and symptoms, and with detailed communications with radiological colleagues and other specialists to comprehensively evaluate possible underlying diseases.

Purpose Few studies have evaluated the outcomes of intraoral vertical ramus osteotomy (IVRO) for the correction of skeletal Class III malocclusion with an anterior open bite and the potential for postoperative relapse. Therefore, this study evaluated the stability of outcomes of IVRO for mandibular prognathism with and without an anterior open bite. Material and Methods This retrospective cohort study included consecutive patients with skeletal Class III malocclusion with (AOB group) and without (NAOB group) an anterior open bite who underwent IVRO at Yonsei Dental Hospital (Seoul, Korea). Lateral cephalograms were analyzed for predictor (open bite, yes or no) and outcome (horizontal and vertical relapse in the mandible) variables before and 7 days, 1 year, and 2 years after surgery. Other variables included the patients' demographic characteristics. Data were analyzed using independent t tests, repeated measures analysis of variance, Pearson correlation coefficients, and multiple linear regression analysis. Results The 2 groups (n = 15 each) were matched for baseline demographic characteristics. During the 2-year postoperative period, anterior and superior mandibular movements were observed in the NAOB group, whereas posterior and superior movements were observed in the AOB group. However, there were no meaningful intergroup differences in horizontal and vertical relapses of the mandible at all time points, although the amount of postoperative inferior relapse increased with a decrease in the amount of initial overbite. Conclusions IVRO for the correction of skeletal Class III malocclusion resulted in good postoperative stability over time, regardless of the presence of a preoperative open bite, although the amount of postoperative inferior relapse showed a weak negative correlation with the initial overbite. Thus, IVRO can be a clinically acceptable treatment for skeletal Class III malocclusion with an anterior open bite.

The aim of this study was to evaluate the effect of malocclusion severity on oral health-related quality of life and food intake ability in adult patients, controlling for sex, age, and the type of dental clinic visited.The sample consisted of 472 Korean patients (156 male, 316 female) with a mean age of 21.1 (SD, 8.6) years in a dental hospital and a private clinic. The correlations between the Korean version of the Oral Health Impact Profile-14 (OHIP-14K), subjective food intake ability (FIA) for 5 key foods, and Index of Orthodontic Treatment Need-Dental Health Component (IOTN-DHC) were investigated.The mean IOTN-DHC and OHIP-14K scores were significantly higher for the dental hospital patients than for the private clinic patients (IOTN-DHC, P 0.001; OHIP-14K, P 0.05). Malocclusion severity was significantly higher in male than in female subjects (P 0.001). Older patients perceived their oral health-related quality of life more negatively than did the teens (P 0.001). As the severity of the malocclusion increased, oral health-related quality of life and masticatory function worsened (OHIP-14K, P 0.001; FIA, P 0.05).As the severity of the malocclusion and the age of the patients increased, oral health-related quality of life and masticatory function relatively deteriorated. This finding provides evidence that severe malocclusions are associated with lower quality of life and less masticatory efficiency in older patients.

Objectives: To evaluate the initial stability of dual-thread miniscrews by analyzing the strain at the bone-implant interface and insertion torque during implantation in artificial bone models with different cortical bone thicknesses. Materials and methods: Insertion torque, and strain, measured with a five-element strain gauge in 1.0, 1.5, and 2.0-mm artificial cortical bone, during insertion of single- (OAS-T1507) and dual-thread (MPlant-U3) type self-drilling miniscrews were assessed. Results: Both dual- and single-thread miniscrews showed greater than 7790 μstrain for all cortical bone thicknesses, and dual-thread miniscrews reached up to 19580 μstrain in 2.00mm cortical bone. The strain of dual-thread miniscrews increased with increasing cortical bone thicknesses of 1.0–2.0mm. For single-thread miniscrews, the maximum insertion torque was relatively constant, but maximum insertion torque increased significantly in dual-thread groups with increasing cortical bone thicknesses ( P < 0.0001). The maximum insertion torque with all cortical bone thicknesses was significantly lower with single- than dual-thread types ( P < 0.0001). Conclusions: Self-drilling dual-thread miniscrews provide better initial mechanical stability, but may cause strain over the physiological bone remodelling limit at the bone-implant interface in thick cortical bone layers.

Orthodontic miniscrews have shifted the paradigm of anchorage in orthodontics and tooth movements that were once difficult have become easier with the aid of miniscrews. Miniscrew failure rates have been reported to be between 10 and 15 per cent (Miyawaki et al. , 2003; Motoyoshi et al. , 2006; Tseng et al. , 2006) and contributing factors associated with success rate include bone quality, patient age, interradicular space, anatomical location, screw diameter and length, screw design, operator skill, among others. In particular, the initial stability of miniscrews is used as a predictor of success (Motoyoshi et al. , 2010). Initial stability also allows for new bone formation at the bone–implant interface (Motoyoshi et al. , 2006) and is essential in preventing miniscrew mobility within the physiologic limits of bone remodelling because failure can occur if there is mobility during treatment (Ivanoff et al. , 1997; Motoyoshi et al. , 2010). The factors impacting initial stability of a miniscrew can be divided into two main areas: the screw and the host, and for the former, diameter and length (Ivanoff et al. , 1997) are reported to play an important role. The quantity and quality of the bone where the screw is placed and cortical bone thickness (CBT) can affect the initial stability of a screw (Cha et al. , 2010a). Measuring insertion torque (Motoyoshi et al. , 2006) and Periotest values (PTVs) (Cha et al. , 2010c) are efficient ways to evaluate the initial stability of different designs of miniscrews. In order to estimate the miniscrew’s stability after insertion, a number of investigators carried out histomorphometric analysis and measured the removal torque As reported by Lim et al. (2008a), an increase in screw diameter can effectively increase the initial stability of a miniscrew. However, increasing …

Masticatory muscles are closely involved in mastication, pronunciation, and swallowing, and it is therefore important to study the specific functions and dynamics of the mandibular and masticatory muscles. However, the shortness of muscle fibers and the diversity of movement directions make it difficult to study and simplify the dynamics of mastication. The purpose of this study was to use 3-dimensional (3D) simulation to observe the functions and movements of each of the masticatory muscles and the mandible while chewing. To simulate the masticatory movement, computed tomographic images were taken from a single Korean volunteer (30-year-old man), and skull image data were reconstructed in 3D (Mimics; Materialise, Leuven, Belgium). The 3D-reconstructed masticatory muscles were then attached to the 3D skull model. The masticatory movements were animated using Maya (Autodesk, San Rafael, CA) based on the mandibular motion path. During unilateral chewing, the mandible was found to move laterally toward the functional side by contracting the contralateral lateral pterygoid and ipsilateral temporalis muscles. During the initial mouth opening, only hinge movement was observed at the temporomandibular joint. During this period, the entire mandible rotated approximately 13 degrees toward the bicondylar horizontal plane. Continued movement of the mandible to full mouth opening occurred simultaneously with sliding and hinge movements, and the mandible rotated approximately 17 degrees toward the center of the mandibular ramus. The described approach can yield data for use in face animation and other simulation systems and for elucidating the functional components related to contraction and relaxation of muscles during mastication.

Objective: To investigate the three-dimensional structural features of three types of mechanically retentive ceramic bracket bases. Materials and Methods: One type of stainless steel (MicroArch, Tomy, Tokyo, Japan) and three types of ceramic maxillary right central incisor brackets—Crystaline MB (Tomy), INVU (TP Orthodontics, La Porte, Ind), and Inspire Ice (Ormco, Glendora, Calif)—were tested to compare and quantitatively analyze differences in the surface features of each ceramic bracket base using scanning electron microscopy (SEM), a three-dimensional (3D) optical surface profiler, and microcomputed tomography (micro-CT). One-way analysis of variance was used to find differences in bracket base surface roughness values and surface areas between groups according to base designs. Tukey's honestly significant differences tests were used for post hoc comparisons. Results: SEM revealed that each bracket exhibited a unique surface texture (MicroArch, double mesh; Crystaline MB, irregular; INVU, single mesh; Inspire Ice, bead ball). With a 3D optical surface profiler, the stainless steel bracket showed significantly higher surface roughness values. Crystaline MB had significantly higher surface roughness values than Inspire Ice. Micro-CT demonstrated that stainless steel brackets showed significantly higher whole and unit bracket base surface areas. Among ceramic brackets, INVU showed significantly higher whole bracket base surface area, and Crystaline MB showed a significantly higher unit bracket base surface area than Inspire Ice. Conclusion: Irregular bracket surface features showed the highest surface roughness values and unit bracket base surface area among ceramic brackets, which contributes to increased mechanically retentive bracket bonding strength.

OBJECTIVE Maxillary anterior segmental distraction osteogenesis (DO) has been the alternative treatment option for patients with midfacial retrusion. To investigate a potentially more effective maxillary anterior segmental DO, a newly designed intraoral alveolar distractor was applied. The objectives of this study were to investigate the skeletal and dental effects of maxillary anterior segmental DO and the relapse pattern. METHODS The study was carried out for 8 patients with unilateral cleft lip and palate (mean age, 16 years 7 months). Four patients were treated with an intraoral appliance (IA), and the remaining with a rigid external distractor (RED). Dental and skeletal measurements were obtained for both groups. These measurements were compared for different time points including pre-DO (T1), post-DO (T2), postconsolidation (T3), and 1-year follow-up (T4). RESULTS Horizontal change of A point was significantly larger after distraction period (T2) in the RED group (mean, 11.0 mm; median, 10.1 mm) than in the IA group (mean, 6.6 mm; median, 7.4 mm) (P < 0.05). Relapse of A point was observed in both RED (mean, -2.3 mm; median, -2.3 mm) and IA groups (mean, -2.6 mm; median, -1.5 mm) at T4. The vertical position of the anterior nasal spine was found to have moved downward in the RED group (mean, 5.5 mm; median, 4.9 mm) but upward in the IA group (mean, -2.5 mm; median, -2.7 mm) after distraction, showing a significant difference between groups (P < 0.05). Axis of upper incisor increased at T2 in the IA group (mean, 10.4 degrees; median, 11.3 degrees), but decreased in the RED group (mean, -10.2 degrees; median, -9.0 degrees) (P < 0.05). It recovered in the RED group at T4. CONCLUSIONS Maxillary anterior segmental DO is effective for the treatment of patients with cleft lip and palate. The alveolar space is regained, and the facial profile is improved without velopharyngeal problems. Superior results are obtained using the RED appliance for maxillary anterior segmental DO relative to the use of the intraoral distractor appliance.

Distraction osteogenesis is widely applied to correct oral and maxillofacial deformities, and intermittent distraction protocols have been used in various clinical applications. There are many challenges for continuous distraction of the jaw bone such as when using hydraulic motors and motor-driven plates. The size of the motor is critical to the ability to miniaturize the complete distractor system, and the importance of size makes it difficult to extrapolate the results of animal models to the clinical situation. This study developed a microactuator-generated distractor (MAGD) for continuous jaw bone distraction. The MAGD system consists of control software based on Microsoft Windows and a Squiggle piezoelectric motor. The system allows various intermittent and continuous distraction protocols to be simply selected using the control software. The maximum force of the laboratory-scale MAGD is 3 N, and the device is ready for adoption in small-animal distraction models such as the rat and mouse. The MAGD needs further refinement before it can be applied to humans, but a fully implanted MAGD system will reduce soft-tissue complications resulting from exposure of the extraoral component. Moreover, the MAGD will support the patient's social activities and require only minimal cooperation from the patient.

The purpose of this article is to review the characteristics of craniofacial morphology in children of short stature and the effects of human growth hormone (HGH) therapy on the craniofacial complex. Changes in body height, facial growth, and dental maturity of a 9-year-old girl who received HGH therapy during orthodontic treatment were observed. Orthodontists need to understand the skeletal characteristics of the craniofacial complex of short-stature patients before beginning orthodontic treatment and consider how the differences between chronologic and skeletal ages affect the timing and method of orthodontic treatment. If short-stature children are undergoing HGH therapy, its cranioskeletal effect should be considered; if possible, it is better to delay orthodontic treatment until HGH is finished. However, if orthodontic treatment is performed, the following should be considered: (1) HGH therapy affects the growth of the mandible more than the growth of the maxilla, (2) the amount and pattern of growth during HGH administration are unpredictable, and (3) HGH therapy rarely affects dental maturity.