Search

This study investigated the degradation of anthraquinone reactive dye C.I. Reactive Blue 19 (RB-19) with initial concentration of 100mg L(-1) in aqueous solution by ozone oxidation. The results of UV/VIS and FTIR spectra showed that the anthraquinone structures, nitrogen linkages and amino groups of RB-19 were destroyed under direct ozone reaction. The identification by LC-MS and GC-MS analyses indicated that some organic acids (e.g., phthalic acids) and 1,3-indanone could be the primary degradation products, respectively. The Microtox toxicity of the ozonated RB-19 solution initially increased but subsequently decreased when ozonation time increased. This detoxification accompanied biodegradability enhancement revealed by BOD/COD ratio increasing from 0.15 to 0.33 after 10min of ozonation.

The biotransformation of octylphenol polyethoxylate surfactant (Triton X-100) and bacterial communities in soil microcosms was investigated. The soil microcosms were designed to simulate real sites of bioremediation. The soil used in this study was contaminated with pesticides and alkylphenol polyethoxylate surfactants over a long period of time. The nitrogen source, (NH4)2SO4 and the mineral salt basal solution were added to the microcosm and the water content was adjusted to 50% with distilled water. The microcosms were aerated using an aeration system with an air flow rate of 0.3 l min(-1). The exogenous bacterial strain Pseudomonas sp. SH4 was added to the microcosms to increase the rate of biotransformation of the Triton X-100. The number of microorganisms and the theoretical extent of formation of carbon dioxide were estimated to evaluate the biotransformation of Triton X-100 in the microcosms. The analytical results revealed that the exogenous bacteria could increase the rate of transformation of Triton X-100 by approximately 50%. Aeration of the microcosm increased the biotransformation of Triton X-100 by 45%. Bacterial count of 6.8x10(10) MPN g(-1) of soil was achieved in the M5 microcosm. Analysis of the bacterial community by 16S rDNA sequences revealed that Pseudomonas sp. SH4 could dominate all the microcosms to which it was added as an exogenous bacteria. The quantity of the indigenous bacterial strains Stenotrophomonas maltophilia, Stenotrophomonas sp. and clone 4-70 were also enhanced in the microcosms by the aeration, and the addition of carbon and nitrogen source.

Co-metabolic degradation of trichloroethylene (TCE) by Pseudomonas putida F1 was investigated in a novel bioreactor with a fibrous bed. A pseudo-first-order rate constant for TCE degradation was 1.4 h−1 for 2.4 to 100 mg TCE l−1. Competitive inhibition of toluene on TCE removal could be prevented in this bioreactor. 90% TCE was removed over 4 h when 95 mg toluene l−1 was presented simultaneously.

A novel fibrous-bed trickling filter was developed to remove toluene present in contaminated air. Pure culture of Pseudomonas putida F1 was attached on fibrous-bed and utilized toluene as the carbon source. Experimental results indicated the removal efficiency decreased with the increase of inlet concentration. In general, the removal efficiency of toluene was greater than 90% when the inlet loading capacity was below 70 g m-3h-3. The elimination capacity increased with increasing inlet loading capacity, but the increased rate decreased gradually. When the inlet loading capacity increased to 300 g m-3h-1, the elimination capacity could approach to 130 g m-3h-1. The first order kinetics model was useful to describe the removal of toluene in this filter and an excellent linear relationship was found between the apparent first order parameter and inlet concentration (ranging from 1.2 g m-3 to 3.5 g m-3). Also, the performance of fibrous-bed trickling filter was relatively stable during the four-month period of continuous operation. Slight clogging phenomena of filters were observed only under high loading capacity.

The sole ozone used in cooling water treatment has raised some critical questions concerned with what happens chemically, that may describe why it can control corrosion, scale and microorganism. The pilot cooling tower (PCT) test presented the effects of ozone as a sole cooling water treatment. Except the higher pH and alkalinity in the PCT test, proper residual ozone concentration produced an oxidative film (protective film) on the metal surface of carbon steel, brass and type 316 stainless steel, the corrosion rate may also be decreased. Ozone was still unpredictable for scale control except for the existence of organic matter. The excellent control of fouling was also attained, that could be determined by the presence of ozone. The strong biocide properties of ozone resulted in excellent biological control. A mechanism is proposed to explain the results.

This study found that MCB photolysis, attacked by ·OH radicals, yielded 2-chlorophenol (2CP), 4-chlorophenol (4CP), 3-chlorocatechol (3-CC), chlorohydroquinone (CHQ), and 4-chlorocatechol (4-CC) as the aromatic intermediates. Oxalic acid was also found as ring opened intermediate. Experimental results showed that hydroxylation occurred prior to the dechlorination preceding ring cleavage. The illumination times for complete dechlorination and ring cleavage of the MCB were 20 minutes and 40 minutes, respectively. After ring cleavage, other reactions were needed to mineralize the organic acids into carbon dioxide and water.

In this study, marble sludge, sewage sludge, drinking water treatment plant sludge, and basic oxygen furnace sludge were used as replacements for limestone, sand, clay, and iron slag, respectively, as the raw materials for the production of cement in order to produce eco-cement. It was found that it is feasible to use marble sludge to replace up to 50% of the limestone and also that other materials can serve as total replacements for the raw materials typically used in the production of cement. The major components of Portland cement were all found in eco-cement clinkers. The eco-cement was confirmed to produce calcium hydroxide and calcium silicate hydrates during the hydration process, increasing densification with the curing age. The compressive strength (S(c)) and microstructural evaluations conducted at 28 d revealed the usefulness of eco-cement. It was observed that the S(c) data correlated linearly with the pore volume (P) data at 28 d. The proposed model equation could be represented as S(c)=178-461P (correlation coefficient, R(2)=0.96). Two parameters, the large capillary pore volume and the medium capillary pore volume, were evaluated using multiple regression analysis.

The decolorization and transformation of the anthraquinone dye, Reactive Blue 19 (RB-19), by ozonation with a semi-batch reactor were investigated. The effects of different operating parameters, such as the initial RB-19 concentrations, ozone feed rates and initial pH, on the performance of color, dye and total organic carbon (TOC) removal were also evaluated based on their pseudo-first-order rate constants and removal efficiencies. The experimental results indicated that the removal of color and the dye itself was more rapid and complete than that of TOC in all the ozonation tests. However, increasing the initial RB-19 concentration had a significant effect on decreasing the rate constant of RB-19 reduction. In addition, increasing the ozone feed rate had positive effects on the color, dye and TOC removal, particularly on the TOC diminution. The rate constant and efficiency of color removal were highest at initial acidic pH conditions, but the dye and TOC removal were more effective at initial basic pH values, possibly due to the more powerful and non-selective hydroxyl radical oxidation.

The reaction sequence for the photocatalytic degradation of monochlorobenzene (MCB) in UV/TiO 2 process, including substrate adsorption, degradation, and mineralization, was studied. The theoretical maximum quantity of MCB that could be adsorbed onto TiO 2 surface in aqueous phase was 0.18 ± 0.04 μmol m −2 of TiO 2 . In accordance with the upper limit of the relative surface coverage of MCB molecules to surface hydroxyls of TiO 2 was around 2.2%, the water molecules as the major adjacent species near TiO 2 surface would compete with MCB molecules. Increasing the initial substrate concentration to an appropriate value or enhancing the affinity between the MCB and the TiO 2 surface by adjusting the solution pH would promote the photocatalytic degradation. Experimental results revealed that the neutral medium was beneficial for the degradation of MCB. In comparison, the mineralization was most improved at acidic condition. Generally, 90% of the total organic carbon (TOC) was mineralized after 240 min illumination time in the examined pH range except solution pH 11. The suppressed mineralization of MCB at solution pH 11 was ascribed to the lack of adsorption. A simplified 2-step consecutive kinetic model was used to simulate the mineralization.

This study examined the factors that influence the reductive dechlorination of trichloroethylene (TCE) when direct current is externally supplied to a laboratory scale iron wall. Experimental results indicated that an anode electrode was placed in contact with the iron filling near the inlet of the column, and then a cathode was located on the top of the column. Excellent TCE degradation efficiency was displayed. The surface of the iron particles was acid-washed by H+, owing to water oxidation around the anode, and large quantities of Fe2+ were produced as a reductant which enhanced the TCE degradation, due to iron corrosion caused by the supply of external electrons. The cathode should be placed in sand fill atop the iron filling in order to avoid the formation of iron (hydr) oxide precipitates on the surface of the iron particles when the pH increases as a result of the release of OH+ around the cathode. Due to more H+ being released, which benefited the acid-washing of the iron filling, the TCE removal efficiency increased from 32% to 100% when the electric potential increased to 60V. However, black precipitates of iron (hydr) oxide were observed coated on the iron surface, causing the blocking of pores in the iron wall with the increase in the electric potential application. The efficiency of TCE degradation was almost equal regardless of groundwater velocity when direct current was applied to the iron wall. Based on observations of TCE degradation during long-term operations, the TCE removal efficiency in the effluent reached 100% after seven days of operation and maintained this high level after 25 days of operation. Thus, iron wall by electroremediation displayed excellent potential for development in long-term operations.

The growth properties and biodegradation mechanism of a Gram-negative bacterium, Pseudomonas nitroreducens TX1 that was able to grow on branched octylphenol polyethoxylates (OPEO(n), average n=9.5) as the sole carbon source over a wide concentration range (1-100,000 mgl(-1)) were studied. Analysis of growth factors indicated the highest specific growth rate (micro) of 0.53 h(-1) was obtained at an initial concentration of 5,000 mgl(-1) OPEO(n). An optimal C/N ratio of 12 was obtained for (NH(4))(2)SO(4) as the nitrogen source in a cultivated medium at pH 7. The kinetic analysis demonstrated that bacterial growth and OPEO(n) degradation followed the Monod equation and were based on a substrate concentration inhibition model and pseudo-first-order reaction, respectively. The substrate inhibition coefficient was over 18,000 mgl(-1) and this indicates that the strain has an ability to sustain growth at high concentrations of OPEO(n) and use it as the sole carbon source under such a stress condition. Furthermore, LC-MS analysis showed that the biodegradation mechanism of dodecyl octaethoxylate (AEO8) by P. nitroreducens TX1 was the sequential cleavage of the ethoxylate chain.

Octylphenol polyethoxylate (OPEO(n)) surfactants are used in numerous commercial and industrial products. Large amounts of such surfactants and their various residual biodegradation by-products are ultimately released into the environment. OPEO(n) biodegradation was performed in this study using pure cultures of Pseudomonas species and strains under different environmental conditions. Environmental factors including the pH, nitrogen sources, and growth kinetics of the cells were investigated. The intermediates of Triton X-100 biotransformation were detected by high performance liquid chromatography-mass spectrophotograph (HPLC-MS). We found the highest specific growth rate (mu) was 0.56 h(-1) and this was achieved by strain E with an initial concentration of Triton X-100 of 5000 mg L(-1). A pH level of 7 was most favorable for cell growth for all five strains. The highest specific growth rate was achieved using (NH(4))(2)SO(4) as the sole nitrogen source for strain E. Strain A showed an enhancement of growth when between 0.2 and 1.4 mg L(-1) of H(2)O(2) was added. Detection of intermediates was possible after four days of transformation and the octylphenol triethoxylate (OPEO(3)) peak was predominant, while the high molecular weight peaks had all disappeared. The kinetic analysis demonstrated that the greatest maximum specific growth rate (mu(max)) and the greatest saturation constant (K(s)) of 0.83 h(-1) and 5.24 mg L(-1), respectively, were obtained for strain E in 5000 mg L(-1) Triton X-100. The higher K(i) revealed that strain A was resistant to higher Triton X-100 concentrations.