Search

The synthesis of hydroxyapatite (HAp) with different shapes and sizes has attracted increasing attention because the applicability of this ceramic material depends on structure-properties relationships (i.e., the dimensions and morphology of HAp crystals determine properties such as the bioactivity and mechanical strength). Although different synthetic routes based on the addition of surfactants, organic modifiers, or dispersants have been proposed to control the growth of HAp crystals, many efforts are being devoted to simplify the whole process using simple parameters such as pH. However, the control of the morphology is still poor and shows low reproducibility. In this work, a new additive-free synthetic route, which is based on the hydrothermal method and the utilization of nonaqueous solvents, is proposed. The influence of the synthesis parameters such as pH, concentration of starting solutions, and the solvent on relevant features such as phase purity, crystallinity, crystallite size, and morphology has been examined using spectroscopic techniques, X-ray diffraction, and scanning electron microscopy. As a consequence, this work presents an easy and robust method based only on the use of organic solvent and the control of the pH that produces pure and crystalline HAp with a controlled shape and size. This method has been used to elucidate some of the key aspects of the crystal growth mechanism and to synthesize HAp crystals with different and well-defined shapes (e.g., belts, rods, flakes needle-like, or polymorph) and sizes, in a reproducible way.

The insertion of an implant in the body of a patient raises the risk of a posterior infection and formation of a biofilm, which can have critical consequences on the patient's health and be associated with a high sanitary cost. While antibacterial agents can be used to prevent the infection, such a strategy is time-limited and causes bacteria resistance. As an alternative to biochemical approaches, we propose here to use light-induced local hyperthermia with plasmonic nanoparticles. This strategy is implemented on surgical meshes, extensively used in the context of hernia repairing, one of the most common general surgeries. Surgical meshes were homogeneously coated with gold nanorods designed to efficiently convert near-infrared light into heat. The modified mesh was exposed to a biofilm of Staphylococcus aureus ( S. aureus) bacteria before being treated with a train of light pulses. We systematically study how the illumination parameters, namely fluence, peak intensity and pulse length, influence the elimination of attached bacteria. Additionally, fluorescence confocal microscopy provides us some insight on the mechanism involved in the degradation of the biofilm. This proof-of-principle study opens a new set of opportunities for the development of novel disinfection approaches combining light and nanotechnology.

Owing to their unique combination of chemical and physical properties, inorganic nanoparticles show a great deal of potential as suitable agents for early diagnostics and less invasive therapies. Yet, their translation to the clinic has been hindered, in part, by the lack of non-invasive methods to quantify their concentration in vivo while also assessing their effect on the tissue physiology. In this work, we demonstrate that diffuse optical techniques, employing near-infrared light, have the potential to address this need in the case of gold nanoparticles which support localized surface plasmons. An orthoxenograft mouse model of clear cell renal cell carcinoma was non-invasively assessed by diffuse reflectance and correlation spectroscopies before and over several days following a single intravenous tail vein injection of polyethylene glycol-coated gold nanorods (AuNRs-PEG). Our platform enables to resolve the kinetics of the AuNR-PEG uptake by the tumor in quantitative agreement with ex vivo inductively coupled plasma mass spectroscopy. Furthermore, it allows for the simultaneous monitoring of local tissue hemodynamics, enabling us to conclude that AuNRs-PEG do not significantly alter the animal physiology. We note that the penetration depth of this current probe was a few millimeters but can readily be extended to centimeters, hence gaining clinical relevance. This study and the methodology presented here complement the nanomedicine toolbox by providing a flexible platform, extendable to other absorbing agents that can potentially be translated to human trials.

Liver fibrosis is a major health problem with multiple associated complications, which, to date, has no effective treatment. Hepatic stellate cells are the main responsible cells for fibrosis formation; upon their activation, excess accumulation of extracellular matrix and collagen deposits occurs. The mitogen platelet-derived growth factor (PDGF) and its receptor β (PDGFRβ) play a major role in hepatic stellate cells activation and are, therefore, promising targets for antifibrotic therapies. Gold nanorods hold great potential for diseased liver treatments, since their passive hepatic accumulation enhances active targeting strategies, hence increasing therapeutic efficiency. In addition, gold nanorods have photothermal properties that, combined with specific cell delivery, can be exploited to induce localized near-infrared light-mediated thermal ablation. Here, we demonstrate that gold nanorods coated with anti-PDGFRβ specifically target activated hepatic stellate cells in vivo. Additionally, gold nanorods-PDGFRβ-mediated photothermal therapy decreases fibrosis, hepatic inflammation, and hepatocyte injury in the experimental model of CCl4-induced liver fibrosis in mice.

Native starch from potatoes and hybrid carrageenans from the red alga Mastocarpus stellatus have been used as gluten-free gelling matrices to obtain functional hydrogels. The enrichment of gelling matrices with antioxidant compounds from natural sources is an increasing market trend. In this context, this work is aimed at the formulation and thermo-rheological characterization of functional hydrogels using potato starch from agro-industrial waste and kappa–iota hybrid carrageenans extracted from the above seaweed, enriched with antioxidant compounds from different agro-industrial products, such as waste coming from the pruning of green tea and two varieties of hops used in the brewing industry. Environmentally friendly technologies such as microwave hydrodiffusion and gravity, microwave-assisted extraction, ultrasounds and autohydrolysis were used for the recovery of antioxidant compounds. The results point out that functional hydrogels based on potato starch and hybrid carrageenans with a wide range of viscoelastic features can be achieved, with the particularity of being suitable for people with celiac disease. The incorporation of selected antioxidant extracts from vegetable by-products involved the drop (about tenfold) of the viscous and elastic properties of the formulated gels. The sequential combination of the above treatments could even further expand the thermo-rheological properties of formulated hydrogels, with potential application in functional foodstuffs and novel gluten-free goods. Xunta de Galicia | Ref. ED431F 2020/01 Ministerio de Ciencia, Innovación y Universidades (España) | Ref. RTI2018-096376-B-I00 Ministerio de Ciencia, Innovación y Universidades (España) | Ref. RYC2018-024454-I

Noble metal nanoparticles (NPs) supporting localized surface plasmon resonances are widely used in the context of biotechnology as optical and absorption contrast agents with great potential applicability to both diagnostics and less invasive therapies. In this framework, it is crucial to have access to simple and reliable microscopy techniques to monitor the NPs that have internalized into cells. While dark field (DF) microscopy takes advantage of the enhanced NP scattering at their plasmon resonance, its use in cells is limited by the large scattering background from the internal cell compartments. Here, we report on a novel two-color dark field microscopy that addresses these limitations by significantly reducing the cell scattering contribution. We first present the technique and demonstrate its enhanced contrast, specificity and reliability for NP detection compared to a standard optical dark field. We then demonstrate its potential suitability in two different settings, namely wide-field parallel screening of circulating cells in microfluidic chips and high-resolution tracking of internalized NPs in cells. These proof of principle experiments show a promising capability of this approach with possible extension to other kinds of targeted systems like bacteria and vesicles.

Nanomedicine has emerged as a promising strategy to address some of the limitations of traditional biomedical sensing, imaging and therapy modalities. Its applicability and efficacy are, in part, hindered by the difficulty in both controllably delivering nanoparticles to specific regions and accurately monitoring them in tissue. Gold nanoparticles are among the most extensively used inorganic nanoparticles which benefit from high biocompatibility, flexible functionalization, strong and tunable resonant absorption, and production scalability. Moreover, their capability to enhance optical fields at their plasmon resonance enables local boosting of non-linear optical processes, which are otherwise very inefficient. In particular, two-photon induced luminescence (TPL) in gold offers high signal specificity for monitoring gold nanoparticles in a biological environment. In this article, we demonstrate that TPL microscopy provides a robust sub-micron-resolution technique able to quantify accumulated gold nanorods (GNRs) both in cells and in tissues. First, the temporal accumulation of GNRs with two different surface chemistries was measured in 786-O cells during the first 24 hours of incubation, and at different nanoparticle concentrations. Subsequently, GNR accumulation in mice, 6 h and 24 hours after tail vein injection, was quantified by TPL microscopy in biopsied tissue from kidney, spleen, liver and clear cell renal cell carcinoma (ccRCC) tumors, in good agreement with inductively coupled mass spectroscopy. Our data suggest that TPL microscopy stands as a powerful tool to understand and quantify the delivery mechanisms of gold nanoparticles, highly relevant to the development of future theranostic medicines.

Owing to their unique chemical and physical properties, colloidal gold nanoparticles have prompted a wide variety of biocompatible nano-agents for cancer imaging, diagnosis and treatment. In this context, biofunctionalized gold nanorods (AuNRs) are promising candidates for light-induced hyperthermia, to cause local and selective damage in malignant tissue. Yet, the efficacy of AuNR-based hyperthermia is highly dependent on several experimental parameters; in particular, the AuNR morphology strongly affects both physical and biological involved processes. In the present work, we systematically study the influence of different structural parameters like the AuNR aspect ratio, length and molecular weight on in vitro cytotoxicity, cellular uptake and heat generation efficiency. Our results enable us to identify the optimum AuNR morphology to be used for in vivo hyperthermia treatment.

Label-free biosensing based on metallic nano-particles supporting localized surface plasmon resonances (LSPR) has recently received growing interest (Anker, J. N., et al. Nat. Mater. 2008, 7, 442-453). Besides its competitive sensitivity (Yonzon, C. R., et al. J. Am. Chem. Soc. 2004, 126, 12669-12676; Svendendahl, M., et al. Nano Lett. 2009, 9, 4428-4433) when compared to the surface plasmon resonance (SPR) approach based on extended metal films, LSPR biosensing features a high-end miniaturization potential and a significant reduction of the interrogation device bulkiness, positioning itself as a promising candidate for point-of-care diagnostic and field applications. Here, we present the first, paralleled LSPR lab-on-a-chip realization that goes well beyond the state-of-the-art, by uniting the latest advances in plasmonics, nanofabrication, microfluidics, and surface chemistry. Our system offers parallel, real-time inspection of 32 sensing sites distributed across 8 independent microfluidic channels with very high reproducibility/repeatability. This enables us to test various sensing strategies for the detection of biomolecules. In particular we demonstrate the fast detection of relevant cancer biomarkers (human alpha-feto-protein and prostate specific antigen) down to concentrations of 500 pg/mL in a complex matrix consisting of 50% human serum.

Objectives Despite their various advantages, such as good esthetic properties, absence of mercury and adhesive bonding to teeth, modern dental composites still have some drawbacks, e.g., a relatively high rate of secondary caries on teeth filled with composite materials. Recent research suggests that microstructured biomaterials surfaces may reduce microbial adhesion to materials due to unfavorable physical material–microbe interactions. The objectives of this study were, therefore, to test the hypotheses that (i) different surface microstructures can be created on composites by a novel straightforward approach potentially suitable for clinical application and (ii) that these surface structures have a statistically significant effect on microbial adhesion properties. Methods Six different dental composites were initially tested for their suitability for microstructuring by polydimethylsiloxane (PDMS) templates. Each composite was light-cured between a glass slide and a microstructured PDMS template. The nano-hybrid composite Grandio Flow was the only tested composite with satisfying structurability, and was therefore used for the bacterial adhesion tests. Composites samples were structured with four different microstructures (flat, cubes, linear trapezoid structures, flat pyramids) and incubated for 4 h in centrifuged saliva. The bacterial adherence was then characterized by colony forming units (CFUs) and scanning electron microscopy (SEM). Results All four microstructures were successfully transferred from the PDMS templates to the composite Grandio Flow. The CFU-test as well as the quantitative analysis of the SEM images showed the lowest bacterial adhesion on the flat composite samples. The highest bacterial adhesion was observed on the composite samples with linear trapezoid structures, followed by flat pyramids and cubes. The microstructure of dental composite surfaces statistically significantly influenced the adhesion of oral bacteria. Significance Modifying the composite surface structure may be a clinically suitable approach to control the microbial adhesion and thus, to reduce the risk of secondary caries at dental composite restorations. Smaller composite surface structures may be useful for accomplishing this.

Single-walled carbon nanotubes (SWCNTs) have been identified as a transporter for anti-cancer drugs, as they are capable of penetrating mammalian cell membranes and allow for a high drug loading due to their nanoscale dimensions and high aspect ratio. In addition, they can assist the targeting of therapeutic agents to the desired site of action by conjugation to antibodies or ligands of cancer cell surface receptors, which increases the effectiveness of the treatment and reduces side effects. In this work, we present a method for the triple functionalisation of oxidised SWCNTs with the anti-cancer drug doxorubicin, a monoclonal antibody, and a fluorescent marker at non-competing binding sites. The proposed methodology allows for the targeted delivery of the anti-cancer drug to cancer cells and the visualisation of the cellular uptake of SWCNTs by confocal microscopy. We show that the complex is efficiently taken up by cancer cells with subsequent intracellular release of doxorubicin, which then translocates to the nucleus while the nanotubes remain in the cytoplasm.

The use of non-viral vectors as delivery systems in gene therapy has been extensively studied recently owing to their advantages over viral vectors. Here, we propose a new gene delivery system based on the use of RNA-wrapped single-walled carbon nanotubes (SWCNTs) complexed with the cationic protein, protamine and the drug chloroquine. Protamine was selected as a cationic protein acting as bridge between negatively charged RNA-wrapped SWCNTs and plasmid DNA. Protamine also contains a nuclear localization signal which enhances the expression of the transfected gene. The drug chloroquine, a lysosomotropic compound which has been reported to increase the transfection efficiency, was attached to RNA-wrapped SWNTs by ionic interactions. The simultaneous delivery of the drug chloroquine with plasmid DNA clearly showed an enhanced gene delivery and expression. The levels of gene expression were quantified using the luciferase reporter gene as model. Optimal conditions for transfection and gene expression were obtained and cytoxicity of the carbon nanotube complexes measured. The optimal complexes were shown to efficiently deliver plasmid DNA for efficient gene expression and may thereby be useful as gene delivery systems for gene therapy.

The surface chemistry of gold nanoparticles (AuNPs) plays a critical role in the self-assembly of thiolated molecules and in retaining the biological function of the conjugated biomolecules. According to the well-established gold–thiol interaction the undefined ionic species on citrate-reduced gold nanoparticle surface can be replaced with a self-assembled monolayer of certain thiolate derivatives and other biomolecules. Understanding the effect of such derivatives in the functionalization of several types of biomolecules, such as PEGs, peptides or nucleic acids, has become a significant challenge. Here, an approach to attach specific biomolecules to the AuNPs (~14 nm) surface is presented together with a study of their effect in the functionalization with other specific derivatives. The effect of biofunctional spacers such as thiolated poly(ethylene glycol) (PEG) chains and a positive peptide, TAT, in dsRNA loading on AuNPs is reported. Based on the obtained data, we hypothesize that loading of oligonucleotides onto the AuNP surface may be controlled by ionic and weak interactions positioning the entry of the oligo through the PEG layer. We demonstrate that there is a synergistic effect of the TAT peptide and PEG chains with specific functional groups on the enhancement of dsRNA loading onto AuNPs.

Aims: Our aim is to explore whether gold nanoparticles (AuNPs) functionalized with a carboxylated polyethylene glycol (PEG) and protamine (AuNP@PEG@Prot) can modulate - enhance or restrain - DNA condensation, altering DNA conformation and inducing structural changes. Understanding how these nanoconjugates modulate DNA structure, size and shape of DNA condensates, and enable control over the resulting 3D structures is of major biological and therapeutic importance. Materials & methods: Citrate-AuNPs were covered with a dense layer of a hetero-functional octa(ethylene glycol) (SH-EG(8)-COOH). Conjugation of protamine to the AuNP@PEG was achieved by taking advantage of the carboxylated surface previously generated on the surface of the NP and the remaining amino groups from the protamine, using carbodiimide and N-hydroxysulfosuccinimide coupling reactions. Results & conclusion: AuNP@PEG@Prot modulates the structure and topology of DNA, not only for condensation, but also for decondensation, via formation of higher quantities of dimers and multimers, when compared with AuNP@PEG and free protamine. Original submitted 16 July 2011; Revised submitted 9 January 2012; Published online 14 May 2012

An in-depth study of a novel functionalization of carbon nanotubes for their application as protein and DNA carriers is presented. First, the optimum conditions for the dispersion of singlewalled carbon nanotubes (SWCNTs) with amphiphilic polypeptides were obtained, and the SWCNT–polypeptide complexes were characterized by different techniques (UV–Vis-NIR, CD, and AFM). Based on the properties of the SWCNT–polypeptide complexes, a model that characterizes the adsorption of natural proteins onto SWCNT was described for the first time. This model predicts the adsorption of natural proteins on SWCNTs based on the protein structure and composition, and therefore, allows the design of methods for the preparation of SWCNT–protein complexes. Besides, the use of cationic-designed amphiphilic polypeptides to disperse SWCNTs is applied for subsequent and efficient binding of DNA to carbon nanotubes by a bilayer approach. Therefore, in this article, we develop procedures for the use of SWCNTs as protein and DNA carriers. The systems were delivered into cells showing that the efficiency of delivery is affected by the charge of the complexes, which has important implications in the use of SWCNT as platforms for protein and DNA binding and subsequent use as delivery systems.

Over the past decade, the capability of double-stranded RNAs to interfere with gene expression has driven new therapeutic approaches. Since small interfering RNA (siRNAs, 21 base pair double-stranded RNA) was shown to be able to elicit RNA interference (RNAi), efforts were directed toward the development of efficient delivery systems to preserve siRNA bioactivity throughout the delivery route, from the administration site to the target cell. Here we provide evidence of RNAi triggering, specifically silencing c-myc protooncogene, via the synthesis of a library of novel multifunctional gold nanoparticles (AuNPs). The efficiency of the AuNPs is demonstrated using a hierarchical approach including three biological systems of increasing complexity: in vitro cultured human cells, in vivo invertebrate (freshwater polyp, Hydra ), and in vivo vertebrate (mouse) models. Our synthetic methodology involved fine-tuning of multiple structural and functional moieties. Selection of the most active functionalities was assisted step-by-step through functional testing that adopted this hierarchical strategy. Merging these chemical and biological approaches led to a safe, nonpathogenic, self-tracking, and universally valid nanocarrier that could be exploited for therapeutic RNAi.

The use of carbon nanotubes as a gene delivery system has been extensively studied in recent years owing to its potential advantages over viral vectors. To achieve this goal, carbon nanotubes have to be functionalized to become compatible with aqueous media and to bind the genetic material. To establish the best conditions for plasmid DNA binding, we compare the dispersion properties of single-, double- and multi-walled carbon nanotubes (SWCNTs, DWCNTs and MWCNTs, respectively) functionalized with a variety of surfactants by non-covalent attachment. The DNA binding properties of the functionalized carbon nanotubes were studied and compared by electrophoresis. Furthermore, a bilayer functionalization method for DNA binding on SWCNTs was developed that utilized RNA-wrapping to solubilize the nanotubes and cationic polymers as a bridge between nanotubes and DNA.

Semipermanently polarized hydroxyapatite, named SP/HAp(w), is obtained by applying a constant dc electric field of 1–10 kV/cm at 300–850 °C to the samples previously sintered in water vapor, while permanently polarized hydroxyapatite, PP/HAp(a), is produced by applying a dc electric field of 3 kV/cm at 1000 °C to the samples sintered in air. SP/HAp(w) has been used for biomedical applications, while PP/HAp(a) has been proved to be a valuable catalyst for N2 and CO2 fixation. In this work, structural differences between SP/HAp(w) and PP/HAp(a) have been ascertained using Raman microscopy, wide-angle X-ray diffraction, scanning electronic microscopy, high-resolution transmission electron microscopy, and grazing incidence X-ray diffraction. Results prove the existence of crystal distortion in the form of amorphous calcium phosphate and ß-tricalcium phosphate (ß-TCP) phases close to the surface because of the atmosphere used in the sintering process. The existence of an amorphous layer in the surface and the phase transition through ß-TCP of SP/HAp(w) are the structural factors responsible for the differences with respect to PP/HAp(a). Moreover, a superstructure has been identified in PP/HAp(a) samples, which could be another structural factor associated with enhanced conductivity, permanent polarization, and catalytic activity of this material