Search

This study demonstrates the potential of copper nanotechnology for the topical treatment of burn injuries and opens new horizons in oncological dermatology.

Erionite is a non-asbestos fibrous zeolite classified by the International Agency for Research on Cancer (IARC) as a Group 1 carcinogen and is considered today similar to or even more carcinogenic than the six regulated asbestos minerals. Exposure to fibrous erionite has been unequivocally linked to cases of malignant mesothelioma (MM) and this killer fibre is assumed to be directly responsible for more than 50% of all deaths in the population of the villages of Karain and Tuzköy in central Anatolia (Turkey). Erionite usually occurs in bundles of thin fibres and very rarely as single acicular or needle-like fibres. For this reason, a crystal structure of this fibre has not been attempted to date although an accurate characterization of its crystal structure is of paramount importance for our understanding of the toxicity and carcinogenicity. In this work, we report on a combined approach of microscopic (SEM, TEM, electron diffraction), spectroscopic (micro-Raman) and chemical techniques with synchrotron nano-single-crystal diffraction that allowed us to obtain the first reliable ab initio crystal structure of this killer zeolite. The refined structure showed regular T—O distances (in the range 1.61–1.65 Å) and extra-framework content in line with the chemical formula (K2.63Ca1.57Mg0.76Na0.13Ba0.01)[Si28.62Al7.35]O72·28.3H2O. The synchrotron nano-diffraction data combined with three-dimensional electron diffraction (3DED) allowed us to unequivocally rule out the presence of offretite. These results are of paramount importance for understanding the mechanisms by which erionite induces toxic damage and for confirming the physical similarities with asbestos fibres.

The true molecular conformation and the crystal structure of benzo[e]dinaphtho[2,3-a;1′,2′,3′,4′-ghi]fluoranthene, 7,14-diphenylnaphtho[1,2,3,4-cde]bisanthene and 7,16-diphenylnaphtho[1,2,3,4-cde]helianthrene were determined ab initio by 3D electron diffraction. All three molecules are remarkable polycyclic aromatic hydrocarbons. The molecular conformation of two of these compounds could not be determined via classical spectroscopic methods due to the large size of the molecule and the occurrence of multiple and reciprocally connected aromatic rings. The molecular structure of the third molecule was previously considered provisional. These compounds were isolated as by-products in the synthesis of similar products and were at the same time nanocrystalline and available only in very limited amounts. 3D electron diffraction data, taken from submicrometric single crystals, allowed for direct ab initio structure solution and the unbiased determination of the internal molecular conformation. Detailed synthetic routes and spectroscopic analyses are also discussed. Based on many-body perturbation theory simulations, benzo[e]dinaphtho[2,3-a;1′,2′,3′,4′-ghi]fluoranthene may be a promising candidate for triplet–triplet annihilation and 7,14-diphenylnaphtho[1,2,3,4-cde]bisanthene may be a promising candidate for intermolecular singlet fission in the solid state.

The crystal structure of linagliptin hemihydrate hemiethanolate was solved by direct methods and refined by least-squares on the basis of 3D electron diffraction data. Linagliptin is one of the lar...

The elusive structure of the mineral kaliophilite has been determined by 3D electron diffraction and refined using single-crystal X-ray data. Despite its simple formula, ideally KAlSiO4, the structure of this mineral remained a mystery for over a century as a result of pseudo-symmetry and twinning, which reduce the coherent crystalline domain size to a few hundreds of nanometres., Kaliophilite is a feldspathoid mineral found in two Italian magmatic provinces and represents one of the 12 known phases with composition close to KAlSiO4. Despite its apparently simple formula, the structure of this mineral revealed extremely complex and resisted structure solution for more than a century. Samples from the Vesuvius–Monte Somma and Alban Hills volcanic areas were analyzed through a multi-technique approach, and finally the crystal structure of kaliophilite was solved using 3D electron diffraction and refined against X-ray diffraction data of a twinned crystal. Results were also ascertained by the Rietveld method using synchrotron powder intensities. It was found that kaliophilite crystallizes in space group P3 with unit-cell parameters a = 27.0597 (16), c = 8.5587 (6) Å, V = 5427.3 (7) Å3 and Z = 54. The kaliophilite framework is a variant of the tridymite topology, with alternating SiO4 and AlO4 tetrahedra forming sheets of six-membered rings (63 nets), which are connected along [001] by sharing the apical oxygen atoms. Considering the up (U) and down (D) orientations of the linking vertex, kaliophilite is the first framework that contains three different ring topologies: nine (1-3-5) (UDUDUD) rings, six (1-2-3) (UUUDDD) rings and twelve (1-2-4) (UUDUDD) rings. This results in a relatively open (19.9 tetrahedra nm−3) channel system with multiple connections between the double six-ring cavities. Such a framework requires a surprisingly large unit cell, 27 times larger than the cell of kalsilite, the simplest phase with the same composition. The occurrence of some Na for K substitution (3–10%) may be related to the characteristic structural features of kaliophilite. Micro-twinning, pseudo-symmetries and anisotropic hkl-dependent peak broadening were also detected, and they may account for the elusive character of the kaliophilite crystal structure.

Cowlesite, ideally Ca6Al12Si18O60·36H2O, is to date the only natural zeolite whose structure could not be determined by X-ray methods. In this paper, we present the ab initio structure determination of this mineral obtained by three-dimensional (3D) electron diffraction data collected from single-crystal domains of a few hundreds of nanometers. The structure of cowlesite consists of an alternation of rigid zeolitic layers and low-density interlayers supported by water and cations. This makes cowlesite the only two-dimensional (2D) zeolite known in nature. When cowlesite gets in contact with a transmission electron microscope vacuum, a phase transition to a conventional 3D zeolite framework occurs in few seconds. The original cowlesite structure could be preserved only by adopting a cryo-plunging sample preparation protocol usually employed for macromolecular samples. Such a protocol allows the investigation by 3D electron diffraction of very hydrated and very beam-sensitive inorganic materials, which were previously considered intractable by transmission electron microscopy crystallographic methods., The mineral cowlesite, solved by cryo-plunging three-dimensional electron diffraction, shows a unique structure with weakly bonded two-dimensional zeolitic layers. It transforms into a fully connected framework upon dehydration at about 120 °C.

We report the rst co-crystals of TCNQ and TCNB based on orthocetamol, a regioisomer of paracetamol. Through a simple solution growth process, co-crystals were produced containing orthocetamol as electron donors, with co-formers of either 7,7,8,8-tetracyanoquinodimethane (TCNQ) or 1,2,4,5-tetracyanobenzene (TCNB), as electron acceptors. Due to sub-micron crystalline domains, 3D electron di raction was employed for structure solution in both systems. This revealed that both systems crystallise in a 1:1 stoichiometry, in which orthocetamol forms a backbone allowing for linking of acceptor molecules in a mixed-stack con guration. Orthocetamol-TCNQ adopts an non-centrosymmetric Pc symmetry, and orthocetamol-TCNB a centrosymmetric P-1 symmetry. UV-Vis and FT-IR were employed to probe the ability of these co-crystals to create CT systems, revealing a low degree of charge transfer. Still, the possibility to use orthocetamol backbone as structural sca old paves the way for an entirely new class of CT materials.

Colloidal chemistry grants access to a wealth of materials through simple and mild reactions. However, even few elements can combine in a variety of stoichiometries and structures, potentially resulting in impurities or even wrong products. Similar issues have been long addressed in organic chemistry by using reaction-directing groups, that are added to a substrate to promote a specific product and are later removed. Inspired by such approach, we demonstrate the use of CsPbCl3 perovskite nanocrystals to drive the phase-selective synthesis of two yet unexplored lead sulfochlorides: Pb3S2Cl2 and Pb4S3Cl2. When homogeneously nucleated in solution, lead sulfochlorides form Pb3S2Cl2 nanocrystals. Conversely, the presence of CsPbCl3 triggers the formation of Pb4S3Cl2/CsPbCl3 epitaxial heterostructures. The phase selectivity is guaranteed by the continuity of the cationic subnetwork across the interface, a condition not met in a hypothetical Pb3S2Cl2/CsPbCl3 heterostructure. The perovskite domain is then etched, delivering phase-pure Pb4S3Cl2 nanocrystals that could not be synthesized directly.

Orthocetamol is a regioisomer of the well-known pain medication paracetamol and a promising analgesic and an anti-arthritic medicament itself. However, orthocetamol cannot be grown as single crystals suitable for X-ray diffraction, so its crystal structure has remained a mystery for more than a century. We report here the ab-initio structure determination of orthocetamol obtained by 3D electron diffraction, combining a low dose acquisition method and a dedicated single electron detector for recording the diffracted intensities. The structure is monoclinic, with a pseudo-tetragonal cell that favors multiple twinning on a scale of a few tens of nanometers. The successful application of 3D electron diffraction to orthocetamol introduces a new gold standard of total structure solution in all cases where X-ray diffraction and electron microscope imaging methods fail.

Stepwise nanobeam precession-assisted electron diffraction allows the structure determination of macromolecular nanocrystals, while limiting radiation damage. A new monoclinic polymorph of lysozyme was revealed and analyzed., Recent advances in 3D electron diffraction have allowed the structure determination of several model proteins from submicrometric crystals, the unit-cell parameters and structures of which could be immediately validated by known models previously obtained by X-ray crystallography. Here, the first new protein structure determined by 3D electron diffraction data is presented: a previously unobserved polymorph of hen egg-white lysozyme. This form, with unit-cell parameters a = 31.9, b = 54.4, c = 71.8 Å, β = 98.8°, grows as needle-shaped submicrometric crystals simply by vapor diffusion starting from previously reported crystallization conditions. Remarkably, the data were collected using a low-dose stepwise experimental setup consisting of a precession-assisted nanobeam of ∼150 nm, which has never previously been applied for solving protein structures. The crystal structure was additionally validated using X-ray synchrotron-radiation sources by both powder diffraction and single-crystal micro-diffraction. 3D electron diffraction can be used for the structural characterization of submicrometric macromolecular crystals and is able to identify novel protein polymorphs that are hardly visible in conventional X-ray diffraction experiments. Additionally, the analysis, which was performed on both nanocrystals and microcrystals from the same crystallization drop, suggests that an integrated view from 3D electron diffraction and X-ray microfocus diffraction can be applied to obtain insights into the molecular dynamics during protein crystal growth.

We report the effect of pressure on a membrane made of dense electrospun NASICON-like Li1.3Al0.3Ti1.7(PO4)3 (LATP). The properties and performance of the pressed LATP nanofibers were investigated and compared with those of pristine LATP nanofibers. While the applied pressure affects the purity and homogeneity of LATP, it is beneficial for ionic transport across the solid electrolyte. The presence of impurity phases as well as the decrease of porosity results in a two order of magnitude higher ionic conductivity at room temperature (3 × 10−5 S cm−1) which is promising to replace bulk NASICON materials in energy storage devices.

In the past few years, many exciting papers reported results based on crystal structure determination by electron diffraction. The aim of this review is to provide general and practical information to structural chemists interested in stepping into this emerging field. We discuss technical characteristics of electron microscopes for research units that would like to acquire their own instrumentation, as well as those practical aspects that appear different between X-ray and electron crystallography. We also include a discussion about applications where electron crystallography provides information that is different, and possibly complementary, with respect to what is available from X-ray crystallography.

The pharmaceutical metaxalone (MTX) was obtained as a conglomerate Form A-R/S, via a newly reported crystallization method exploiting volatile deep eutectic solvents. Homochiral crystals of Form A-S, could previously be obtained only by crystallization from enantiopure MTX, synthesized from enantiopure starting materials, and never from a racemic solution of MTX. Homochiral crystals of Form A-R were obtained here concomitantly for the first time. Powder X-ray diffraction and chiral high performance liquid chromatography were used to infer that the structure of the crystals obtained were a conglomerate relating to the known Form A-S. However, this pathway results in exclusively micron-sized needles, below typical structural solution size, and so 3D electron diffraction, combining low-dose continuous acquisition and a dedicated single-electron detector was used for ab-initio structural solution of Form A-R/S. Crystallization via volatile deep eutectic solvents allowed the structural landscape of metaxalone to be further explored, adding a point to its phase diagram. This example highlights the possibility for symbiotic relationships between structural solution via electron diffraction and crystallisation pathways which do not result in crystals of a suitable size and quality for single-crystal X-ray diffraction.

Metastable polymorphs typically display higher solubility than their thermodynamically stable counterparts, whilst having dissimilar mechanical and biopharmaceutical properties. It is unsurprising then, that generic and innovator companies alike pursue isolation and characterisation of these materials. Here we report the determination of the crystal structure of the metastable form II of loratadine using a combination of low-resolution 3D electron diffraction data and density functional theory. Importantly, electron diffraction was able to establish that the crystallites were phase pure i.e. no other polymorphic forms were identified throughout the sample. 3D data collected at room temperature circumvented potential phase changes, conveniently preserving the metastable polymorph during structural elucidation. The limited resolution of the electron diffraction data (>1 A), combined with the complexity of configurational disorder and possible beam-induced amorphization, meant that the structure could not be obtained by ab initio direct methods. This is a recurrent situation for nanocrystalline pharmaceutical crystals. Instead, two possible starting models arose from simulated annealing based on diffraction data alone. Density functional theory energy minimisation followed, determining the correct model, with an independent validation of the experimental structural solution, comparing favourably to single-crystal X-ray diffraction studies. Our results reveal a promising protocol enabling the exploitation of electron diffraction data with limited resolution obtained from beam sensitive organic materials. The method is widely extendable to a number of pharmaceutical compounds that are not amenable for the growth of large single crystals required by X-ray diffraction, and for which efficient structure determination is required.

This article analyzes the use of supercritical CO2 green technology in the reactive crystallization processes involved in the formation of a bioMOF that contains curcumin and ZnII metal centers. A new phase with a [Zn(curcumin)]n composition, termed sc-CCMOF-1, is presented. The developed scCO2 protocol allows high yields of the small-sized crystalline material, which was characterized by the use of the recently developed electron diffraction tomography method applied to the resolution of submicrometric crystals. A remarkable 3D macrostructure with a complex morphology was obtained. To analyze the crystallization mechanism, multiple identical runs were performed under similar experimental conditions to study in each time period the crystal growth progress ex situ by X-ray diffraction and scanning electron microscopy. These experiments indicated that the process to achieve the sc-CCMOF-1 in a crystalline form involves the formation of amorphous or semicrystalline metastable phases that derived into hierarc...

Crystallography of nanocrystalline materials has witnessed a true revolution in the past 10 years, thanks to the introduction of protocols for 3D acquisition and analysis of electron diffraction data. This method provides single-crystal data of structure solution and refinement quality, allowing the atomic structure determination of those materials that remained hitherto unknown because of their limited crystallinity. Several experimental protocols exist, which share the common idea of sampling a sequence of diffraction patterns while the crystal is tilted around a noncrystallographic axis, namely, the goniometer axis of the transmission electron microscope sample stage. This Outlook reviews most important 3D electron diffraction applications for different kinds of samples and problematics, related with both materials and life sciences. Structure refinement including dynamical scattering is also briefly discussed., 3D electron diffraction allows the atomic structure determination of inorganic, organic, and macromolecular materials that remained hitherto unknown because of their limited crystal size.

Analytical characterization and evaluation of performance of zeolite catalysts are normally done under the assumption of a homogeneous batch. However, it is known that in the same batch particles of the zeolite ZSM-5 can be very different one from another, regarding their aluminum content and catalytic performance. Here, we quantify the extent of this heterogeneity within a singular synthesis batch of nanocrystalline ZSM-5, through the analysis of single crystalline individua. We found that the overall aluminum content was distributed unequally between two kinds of crystal populations. Cornered crystals contained three times more aluminum than round-shaped crystals. This observation connects morphological differences to the chemical composition of each zeolite crystal for the first time. This finding could provide a means for performance optimization in zeolite synthesis., Microporous and Mesoporous Materials, 294, ISSN:1387-1811, ISSN:1873-3093

In this work a new ultrafast data collection strategy for electron diffraction tomography is presented that allows reducing data acquisition time by one order of magnitude. This methodology minimizes the radiation damage of beam-sensitive materials, such as microporous materials. This method, combined with the precession of the electron beam, provides high quality data enabling the determination of very complex structures. Most importantly, the implementation of this new electron diffraction methodology is easily affordable in any modern electron microscope. As a proof of concept, we have solved a new highly complex zeolitic structure named ITQ-58, with a very low symmetry (triclinic) and a large unit cell volume (1874.6 Å), containing 16 silicon and 32 oxygen atoms in its asymmetric unit, which would be very difficult to solve with the state of the art techniques., The authors gratefully acknowledge financial support of European Research Council (ERC-2014-AdG ref 671093 “MATching zeolite SYNthesis with CATalytic activity”), Spanish Government (MAT2015-71842-P (MINECO/FEDER), MAT2012-38567-C02-01 and Severo Ochoa SEV-2012-0267), and Generalitat Valenciana (Project Prometeo). E.M. was also supported by the Italian project FIR2013 Exploring the Nanoworld.

A highly porous member of isoreticular MFU-4-type frameworks, [Zn(5)Cl(4)(BTDD)(3)] (MFU-4l(arge)) (H(2)-BTDD=bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin), has been synthesized using ZnCl(2) and H(2)-BTDD in N,N-dimethylformamide as a solvent. MFU-4l represents the first example of MFU-4-type frameworks featuring large pore apertures of 9.1 Å. Here, MFU-4l serves as a reference compound to evaluate the origin of unique and specific gas-sorption properties of MFU-4, reported previously. The latter framework features narrow-sized pores of 2.5 Å that allow passage of sufficiently small molecules only (such as hydrogen or water), whereas molecules with larger kinetic diameters (e.g., argon or nitrogen) are excluded from uptake. The crystal structure of MFU-4l has been solved ab initio by direct methods from 3D electron-diffraction data acquired from a single nanosized crystal through automated electron diffraction tomography (ADT) in combination with electron-beam precession. Independently, it has been solved using powder X-ray diffraction. Thermogravimetric analysis (TGA) and variable-temperature X-ray powder diffraction (XRPD) experiments carried out on MFU-4l indicate that it is stable up to 500 °C (N(2) atmosphere) and up to 350 °C in air. The framework adsorbs 4 wt % hydrogen at 20 bar and 77 K, which is twice the amount compared to MFU-4. The isosteric heat of adsorption starts for low surface coverage at 5 kJ mol(-1) and decreases to 3.5 kJ mol(-1) at higher H(2) uptake. In contrast, MFU-4 possesses a nearly constant isosteric heat of adsorption of ca. 7 kJ mol(-1) over a wide range of surface coverage. Moreover, MFU-4 exhibits a H(2) desorption maximum at 71 K, which is the highest temperature ever measured for hydrogen physisorbed on metal-organic frameworks (MOFs).

A novel crystalline boron oxynitride (BON) phase has been synthesized under static pressures exceeding 15 GPa and temperatures above 1900 °C, from molar mixtures of B2O3 and h-BN. The structure and composition of the synthesized product were studied using high-resolution transmission electron microscopy, electron diffraction, automated diffraction tomography, energy dispersive X-ray spectroscopy and electron energy-loss spectroscopy (EELS). BON shows a hexagonal cell (R3m, Z = 3) with lattice parameters a = 2.55(5) A and c = 6.37(13) A, and a crystal structure closely related to the cubic sphalerite type. The EELS quantification yielded 42 at % B, 35 at % N, and 23 at % O (B:N:O ≈ 6:4:3). Electronic structure calculations in the framework of Density Functional Theory have been performed to assess the stabilities and properties of selected models with the composition B6N4O3. These models contain ordered structural vacancies and are superstructures of the sphalerite structure. The calculated bulk moduli of ...

Layered double hydroxides (LDHs) are versatile materials used for intercalating bioactive molecules in the fields of pharmaceuticals, nutraceuticals and cosmetics, with the purpose of protecting them from degradation, enhancing their water solubility to increase bioavailability and improving their pharmacokinetic properties and formulation stability. Moreover, LDHs are used in various technological applications to improve stability and processability. The crystal chemistry of hydrotalcite-like compounds was investigated by X-ray powder diffraction (XRPD), automated electron diffraction tomography (ADT) and thermogravimetric analysis (TGA)-GC-MS to shed light on the mechanisms involved in ion exchange and absorption of contaminants, mainly carbonate anions. For the first time, ADT allowed a structural model of LDH_NO3 to be obtained from experiment, shedding light on the conformation of nitrate inside LDH and on the loss of crystallinity due to the layer morphology. The ADT analysis of a hybrid LDH sample (LDH_EUS) clearly revealed an increase in defectivity in this material. XRPD demonstrated that the presence of carbonate can influence the intercalation of organic molecules into LDH, since CO3 -contaminated samples tend to adopt d spacings that are approximate multiples of the d spacing of LDH_CO3 . TGA-GC-MS allowed intercalated and surface- adsorbed organic molecules to be distinguished and quantified, the presence and amount of carbonate to be confirmed, especially at low concentrations (

Alkali metal tantalates are of interest for applications in photocatalysis as well as in high temperature resistance or capacitor dielectric materials. We have synthesized nanosized Ta2O5 rods and MTaO3 cubes (M = Na, K, Rb) hydrothermally and demonstrate the pH dependence of the synthesis of tantalum oxide and tantalate nanoparticles. The morphologies of the nanoparticles range from particle agglomerates in acidic reaction media over rods at neutral pH to tantalate cubes in basic reaction media. Whereas there is no apparent influence of the base cation on the particle morphology, there is a pronounced effect on the particle composition. At high base concentrations cubic tantalate particles with a pyrochlore structure were formed. The pyrochlore structure allows a complete ion exchange through the tunnels in the structure by replacing the alkali metal ions by H+ while retaining the particle morphology. The as-synthesized particles show promising photocatalytic properties.

In this paper the reliability of structure solution of nano-crystalline porous compounds with preferred orientation based on automated electron diffraction tomography (ADT) is discussed. It will be shown that the limitations of the data acquisition geometry can be overcome by completing the missing diffraction data with additional diffraction information. Apart from different ways of sample preparation, data merging with either additional ADT data sets or intensities derived from X-ray powder diffraction comprise an effective way to improve the accuracy of the structure solution.

Herein, we investigate human single hydroxyapatite crystals (enamel and dentine) by convergent-beam electron diffraction (CBED) and automated electron-diffraction tomography (ADT). The CBED pattern shows the absence of the mirror plane perpendicular to the c axis leading to the P63 space group instead of the P63 /m space group considered for larger-scale crystals, this is confirmed by ADT. This experimental evidence is of prime importance for understanding the morphogenesis and the architectural organization of calcified tissues.

A new layered borosilicate has been synthesized in the presence of cesium and sodium cations and its structure has been solved by a combination of automated diffraction tomography (ADT) and X-ray powder diffraction (XRPD). MZ-35 has a composition NaCs 2 [BSi 7 O 16 (OH) 2 ](OH) 2 ·4H 2 O and features space group P-4m2. The unusually small unit cell ( a 7.3081 A, c 10.7520 A) is shared by two random-stacked configurations of the structure: a network of connected pentasil units related to the layer of RUB-18 and a bidimensional checkerboard of intersecting ladders of 4-membered rings. The two configurations are related by the simple face-sharing inversion of a hydroxyl-bearing tetrahedron.

Closed WS2 nanoboxes were formed by topotactic sulfidization of a WO3/WO3·⅓H2O intergrowth precursor. Automated diffraction tomography was used to elucidate the growth mechanism of these unconventional hollow structures. By partial conversion and structural analysis of the products, each of them representing a snapshot of the reaction at a given point in time, the overall reaction can be broken down into a cascade of individual steps and each of them identified with a basic mechanism. During the initial step of sulfidization WO3·⅓H2O transforms into hexagonal WO3 whose surface allows for the epitaxial induction of WS2. The initially formed platelets of WS2 exhibit a preferred orientation with respect to the nanorod surface. In the final step individual layers of WS2 coalesce to form closed shells. In essence, a cascade of several topotactic reactions leads to epitactic induction and formation of closed rectangular hollow boxes made up from hexagonal layers.

Au–MnO heteroparticles were immobilized on the surface of TiO2 nanowires and tagged subsequently with a fluorescent ligand. The immobilization of the Au@MnO heteroparticles was achieved by functionalizing the TiO2 nanowire support with a polymer containing catechol anchor groups for binding to the metal oxide surface and amine groups for conjugation to the Au domains of the Au@MnO heteroparticles. The Au domain of the resulting TiO2@Au–MnO nanocomposite could be functionalized selectively with a thiol-tagged 24 mer oligomer containing Texas red (SH-ODN-TXS red), whereas a green dye (NBD–Cl) could be anchored selectively to the TiO2 “support” using the free amine groups of the polymeric ligand. The binding of the NBD and the Texas red fluorophors was monitored by confocal microscopy and the functionalization of the metal oxide nanoparticles was monitored by UV-Vis spectroscopy. All composite products were characterized by transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDX), confocal laser scanning microscopy (CLSM) and UV-Vis spectroscopy.

tion that is fundamental for understanding material properties. Still, a number of compounds have eluded such kinds of analysis because they are nanocrystalline, highly disordered, with strong pseudosymmetries or available only in small amounts in polyphasic or polymorphic systems. These materials are crystallographically intractable with conventional Xray or synchrotron radiation diffraction techniques. Single nanoparticles can be visualized by high-resolution transmission electron microscopy (HR-TEM) up to sub�ngstrom resolution, [2] but obtaining 3D information is still a difficult task, especially for highly beam-sensitive materials and crystal structures with long cell parameters. Electron diffraction (ED) delivers higher resolved data with a significant lower electron dose on the sample, but is biased by a substantial number of missing reflections and the occurrence of dynamic scattering that affects reflection intensities. [3] Therefore, ED is mainly used in combination with Xray powder diffraction and high-resolution electron microscopy. [4]

The oxonitridophosphate SrP(3)N(5)O has been synthesized by heating a multicomponent reactant mixture that consisted of phosphoryl triamide OP(NH(2))(3), thiophosphoryl triamide SP(NH(2))(3), SrS, and NH(4)Cl enclosed in evacuated and sealed silica-glass ampoules up to 750 °C. The compound was obtained as nanocrystalline powder with needle-shaped crystallites. The crystal structure was solved ab initio on the basis of electron diffraction data by means of automated electron diffraction tomography (ADT) and verified by Rietveld refinement with X-ray powder diffraction data. SrP(3)N(5)O crystallizes in the orthorhombic space group Pnma (no. 62) with unit-cell data of a=18.331(2), b=8.086(1), c=13.851(1) A and Z=16. The compound is a highly condensed layer phosphate with a degree of condensation κ=½. The corrugated layers (∞)(2){(P(3)N(5)O)(2-)} consist of linked, triangular columns built up from P(O,N)(4) tetrahedra with 3-rings and triply binding nitrogen atoms. The Sr(2+) ions are located between the layers and exhibit six-, eight-, and ninefold coordination. FTIR and solid-state NMR spectra of SrP(3)N(5)O are discussed as well.

Tungsten oxide nanobrushes were synthesized using a solvothermal approach that lead to self-branching in the presence of citric acid and hexadecylamine as surfactants. Our synthetic approach yielded branched nanorods of tungsten oxide in a single synthetic step. Based on our results, we propose a phenomenological pathway for the formation, branching, and assembly of these tungsten oxide brushes. The formation of tungsten oxide brushes proceeds by thermal decomposition of ammonium tungstate in the presence of citric acid and hexadecylamine. The pale blue powder obtained after solvothermal reaction was analyzed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The field emission (FE) properties of the tungsten oxide nanostructures which can be tailored by their aspect ratio and the hierarchical nanostructures follow a Fowler–Nordheim behavior.

Repeated precipitation of colloidal semiconductor quantum dots (QD) from a good solvent by adding a poor solvent leads to an increasing number of QD oligomers after redispersion in the good solvent. By using density gradient ultracentrifugation we have been able to separate QD monomer, dimer, and trimer fractions from higher oligomers in such solutions. In the corresponding fractions QD dimers and trimers have been enriched up to 90% and 64%, respectively. Besides directly coupled oligomers, QD dimers and trimers were also assembled by linkage with a rigid terrylene diimide dye (TDI) and separated again by ultracentrifugation. High-resolution transmission electron micrographs show that the interparticle distances are clearly larger than those for directly coupled dots proving that the QDs indeed are cross-linked by the dye. Moreover, energy transfer from the QDs to the TDI "bridge" has been observed. Individual oligomers (directly coupled or dye-linked) can be readily deposited on a substrate and studied simultaneously by scanning force and optical microscopy. Our simple and effective scheme is applicable to a wide range of ligand stabilized colloidal nanoparticles and opens the way to a detailed study of electronic coupling in, e.g., QD molecules.

Automated electron Diffraction Tomography (ADT) comprises an upcoming method for “ab intio” structure analysis of nano crystals. ADT allows fine sampling of the reciprocal space by sequential collection of electron diffraction patterns while tilting a nano crystal in fixed tilt steps around an arbitrary axis. Electron diffraction is collected in nano diffraction mode (NED) with a semi-parallel beam with a diameter down to 50 nm. For crystal tracking micro-probe STEM imaging is used. Full automation of the acquisition procedure allowed optimisation of the electron dose distribution and therefore analysis of highly beam sensitive samples. Cell parameters, space group and reflection intensities can be determined directly within a reconstructed 3d diffraction volume using a dedicated software package (ADT3D). Intensity data sets extracted from such a volume usually show a high coverage and significantly reduced dynamical effects due to “off-zone” acquisition. The use of this data for “ab initio” structure solution by direct methods implemented in standard programs for X-ray crystallography is demonstrated. (© 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Engineering materials with specific physical properties have recently focused on the effect of nanoscopic inhomogeneities at the 10 nm scale. Such features are expected to scatter medium- and long-wavelength phonons thereby lowering the thermal conductivity of the system. Low thermal conductivity is a prerequisite for effective thermoelectric materials, and the challenge is to limit the transport of heat by phonons, without simultaneously decreasing charge transport. A solution-phase technique was devised for synthesis of thermoelectric "Zn(4)Sb(3)" nanocrystals as a precursor for phase segregation into ZnSb and a new Zn-Sb intermetallic phase, Zn(1+delta)Sb, in a peritectoid reaction. Our approach uses activated metal nanoparticles as precursors for the synthesis of this intermetallic compound. The small particle size of the reactants ensures minimum diffusion paths, low activation barriers, and low reaction temperatures, thereby eliminating solid-solid diffusion as the rate-limiting step in conventional bulk-scale solid-state synthesis. Both phases were identified and structurally characterized by automated electron diffraction tomography combined with precession electron diffraction. An ab initio structure solution based on electron diffraction data revealed two different phases. The new pseudo-hexagonal phase, Zn(1+delta)Sb, was identified and classified within the structural diversity of the Zn-Sb phase diagram.

In the last decade the importance of transmission electron microscopic studies has become increasingly important with respect to the characterization of organic materials, ranging from small organic molecules to polymers and biological macromolecules. This review will focus on the use of transmission electron microscope to perform electron crystallography experiments, detailing the approaches in acquiring electron crystallographic data. The traditional selected area approach and the recently developed method of automated diffraction tomography (ADT) will be discussed with special attention paid to the handling of electron beam sensitive organic materials.

Metal and metal oxide nanocrystals have sparked great interest due to their excellent catalytic, magnetic, and electronic properties. Particularly, the integration of metallic nanocrystals and one-dimensional (1D) electronically conducting carbons to form metal-carbon hybrids can lead to enhanced physical and chemical properties or even the creation of new properties with respect to single component materials. However, direct access to thermally stable and structurally ordered 1D metal-carbon hybrids remains a primary challenge. We report an in situ fabrication of Co(3)O(4) or Pt nanocrystals incorporated into 1D nanoporous carbons (NPCs) via an organometallic precursor-controlled thermolysis approach. The AB(2)-type (one diene and two dienophile) 3,4-bis(4-dodecynylphenyl)-substituted cyclopentadienone and its relevant cobalt or platinum complex are first impregnated into the nanochannels of AAO (anodic alumina oxide) membranes. The intermolecular Diels-Alder reaction of these precursor molecules affords the formation of cobalt or platinum functionalized polyphenylene skeletons. Subsequent thermolysis transforms the polyphenylene backbones into 1D nanoporous carbonaceous frameworks, while the metallic moieties are reduced into Co or Pt nanocrystals, respectively. After removal of the AAO template, 1D NPCs/Co(3)O(4) or NPCs/Pt are obtained, for which structural characterizations reveal that high-quality Co(3)O(4) or Pt nanocrystals are distributed homogeneously within carbon frameworks. These unique 1D metal-carbon hybrids exhibit a promising potential in electrochemical energy storage. NPCs/Co(3)O(4) is evaluated as an electrode material in a supercapacitor, for which Co(3)O(4) nanocrystals contribute an exceptionally high gravimetric capacitance value of 1066 F g(-1). NPCs/Pt is applied as an electrocatalyst showing excellent catalytic efficiency toward methanol oxidation in comparison to commercial E-TEK (Pt/C) catalyst.

A chemically specific and facile method for growth of ZnO nanorods on WS2 nanotubes (NT-WS2) is reported. The modification strategy is based on the chalcophilic affinity of Zn, which serves as an anchor to immobilize ZnO colloids onto the WS2 nanotubes. The surface bound ZnO colloids have been used as a seed to grow ZnO nanorods on WS2 nanotubes. The immobilization of ZnO colloids was monitored by UV−vis spectroscopy and photoluminescence spectroscopy whereas the growth of ZnO nanorods was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

International audience; The synthesis and the structure of IM-17, a new germanosilicate with a novel zeolitic topology, prepared hydrothermally with decamethonium as the organic structure directing agent, are reported. The structure of calcined and partially rehydrated IM-17 of chemical formula per unit cell |(H2O)14.4|[Si136.50Ge39.50O352] was solved ab initio using electron diffraction ADT data in the acentric Amm2 (setting Cm2m) space group and refined by the Rietveld method. This new zeolite framework type contains a 3D pore system made of intersecting 12, 10 and 8-ring channels.