Search

With the goal of developing a quencher-free probe composed of an artificial nucleic acid, the fluorescent nucleobase analogue 5-(perylenylethynyl)uracil ( Pe U), which was incorporated into totally artificial serinol nucleic acid (SNA) as a substitute for thymine, has been synthesized. In the context of a 12-mer duplex with RNA, these fluorophores reduce duplex stability slightly compared with that of an SNA without Pe U modification; thus suggesting that structural distortion is not induced by the modification. If two Pe Us were incorporated at separate positions in an SNA, the fluorescent emission at λ≈490 nm was clearly enhanced upon hybridization with complementary RNA. A quencher-free SNA linear probe containing three Pe Us, each separated by six nucleobases, has been designed. Detection of target RNA with high sensitivity and discrimination of a single-base mismatch has also been demonstrated., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Cellular functions are regulated by the up- and down-regulation and localization of RNA molecules. Therefore, many RNA detection methods have been developed to analyze RNA levels and localization. Molecular beacon (MB) is one of the major methods for quantitative RNA detection and analysis of RNA localization. Most oligonucleotide-based probes, including MB, are designed to target a long flexible region on the target RNA molecule, e.g., a single-stranded region. Recently, analyses of tRNA localization and levels became important, as it has been shown that environmental stresses and chemical reagents induce nuclear accumulation of tRNA and tRNA degradation in mammalian cells. However, tRNA is highly structured and does not harbor any long flexible regions. Hence, only a few methods are currently available for detecting tRNA. In the present study, we attempted to detect elongator tRNAMet (eMet) and initiator tRNAMet (iMet) by using an in-stem molecular beacon (ISMB), characterized by more effective quenching and significantly higher sensitivity than those of conventional MB. We found that ISMB1 targeted a 5'- region that includes the D arm of tRNA and that it detected eMet and iMet transcripts as well as mature eMet with high sensitivity. Moreover, the analysis revealed that the formation of the ISMB/tRNA transcript complex required more time than the formation of an ISMB/unstructured short RNA complex. These results suggest that ISMB-based tRNA detection can be a useful tool for various biological and medical studies., Competing Interests: The authors have declared that no competing interests exist.

Molecular beacons composed of the artificial serinol nucleic acid (SNA) have demonstrated utility as novel fluorescence probes for visualization of RNA in fixed cells using both conventional fluorescence in situ hybridization (FISH) and wash-free FISH protocols. The SNA molecular beacons have higher affinity for target RNA and greater sensitivity than molecular beacons composed of DNA. Here we describe facile synthesis of the SNA using a conventional DNA synthesizer and protocols for purification by PAGE and HPLC as well as methods for use of the SNA molecular beacon in FISH.

Efficient strand invasion by a linear probe to fluorescently label double-stranded DNA has been implemented by employing a probe and unmodified PNA. As a fluorophore, we utilized ethynylperylene. Multiple ethynylperylene residues were incorporated into the DNA probe via a d-threoninol scaffold. The ethynylperylene did not significantly disrupt hybridization with complementary DNA. The linear probe self-quenched in the absence of target DNA and did not hybridize with PNA. A gel-shift assay revealed that linear probe and PNA combination invaded the central region of double-stranded DNA upon heat-shock treatment to form a double duplex. To further suppress the background emission and increase the stability of the probe/DNA duplex, a probe containing anthraquinones as well as ethynylperylene was synthesized. This probe and PNA invader pair detected an internal sequence in a double-stranded DNA with high sensitivity when heat shock treatment was used. The probe and PNA pair was able to invade at the terminus of a long double-stranded DNA at 40°C at 100mM NaCl concentration., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

An artificial nucleic acid based on acyclic serinol building blocks and termed "serinol nucleic acid" (SNA) was used to construct a fluorescent probe for RNA visualization in cells. The molecular beacon (MB) composed of only SNA with a fluorophore at one terminus and a quencher at the other was resistant to enzymatic digestion, due to its unnatural acyclic scaffold. The SNA-MB could detect its complementary RNA with extremely high sensitivity; the signal-to-background (S/B) ratio was as high as 930 when perylene and anthraquinone were used as the fluorophore and quencher pair. A high S/B ratio was also achieved with SNA-MB tethering the conventional Cy3 fluorophore, and this probe enabled selective visualization of target mRNA in fixed cells. Thus, SNA-MB has potential for use as a biological tool capable of visualizing RNA in living cells., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We herein describe a novel in-stem molecular beacon (ISMB) containing multiple Cy3-quencher pairs on d-threoninol scaffolds in the stem region. The designed Cy3 derivative was not significantly quenched by the adjacent nucleobases, self-quenching of the fluorophore was minimal, and the fluorophore did not severely destabilize the duplex. Using newly designed Cy3, we synthesized ISMBs containing two Cy3 moieties. The signal to background ratio of the ISMB containing two Cy3 moieties was above 100, whereas that with one Cy3 was 30. A Cy3-derivative containing ISMB used in a fluorescence in situ hybridization (FISH) detected endogenous β-actin mRNA in fixed cells without need for washing procedures., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Here, we investigated spectroscopic behaviors of tetramethylrhodamine (TMR) homo- and hetero-dimers within DNA duplex. In order to shield the chromophores from natural base pairs, we used cyclohexyl base pairs as 'insulators'; these pairs were inserted between the chromophores and nucleobases. When a single TMR moiety was sandwiched between cyclohexyl base pairs, the emission intensity increased by fivefold relative to a TMR between natural base pairs, because electron transfer from nucleobases was suppressed. Next, we inserted two TMRs between the cyclohexyl base pairs and found that they facilitated H-dimer formation of TMR; a distinct hypsochromic shift was induced only when cyclohexyl base pairs were inserted. We further examined quenching behavior of a TMR paired with a quencher dye between cyclohexyl base pairs. Interestingly, fluorescence from TMR was quenched by nitro methyl red more efficiently in the presence of cyclohexyl base pairs than in their absence. This suggests that neighboring natural base pairs disturbed electron or hole transfer between the fluorophore and the quencher. The cyclohexyl base pairs shielded the chromophore pair from the natural base pairs and allowed intrinsic electron transfer., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Although distance dependence of Förster resonance energy transfer (FRET) is well-studied and FRET has been extensively applied as "molecular ruler", only limited examples of orientation-dependent FRET have been reported. To create a robust FRET system that precisely reflects the orientation between donor and acceptor, donor and acceptor fluorophores were introduced into a DNA via a D-threoninol scaffold. Strong stacking interactions among intercalated dyes and natural base-pairs suppress free movement of the dyes, clamping them in the duplex in a fixed orientation. Pyrene and perylene were used as donor and acceptor, respectively, and both the distance and orientation between these dyes were systematically controlled by varying the number of intervening AT pairs from 1 to 21 (corresponding to two turns of helix). FRET efficiency determined from static fluorescence measurement did not decrease linearly with the number (n) of inserted AT pairs but dropped significantly every 5 base pairs (i.e., n = 8, 13, and 18), corresponding to a half-turn of the B-type helix. This clearly demonstrates that FRET efficiency reflects the orientation between pyrene and perylene. We also measured time-resolved fluorescence spectroscopy with a streak camera and successfully observed the time-course of the energy transfer directly. As expected, the FRET efficiencies determined from the lifetime of pyrene emission were in good agreement with static measurements. Theoretical calculation of FRET efficiency assuming that the DNA duplex is a rigid cylinder with B-type geometry coincided with the experimental results. We believe that our method of using d-threoninol will contribute to further development of FRET-based measurement techniques.

Asymmetric dye clusters with a single fluorophore (Cy3) and multiple quenchers (4'-methylthioazobenzene-4-carboxylate, methyl red, and 4'-dimethylamino-2-nitroazobenzene-4-carboxylate) were prepared. The dye and one-to-five quenchers were tethered through D-threoninol to opposite strands of a DNA duplex. NMR analysis revealed that the clusters with a single fluorophore and two quenchers formed a sandwich-like structure (antiparallel H-aggregates). The melting temperatures of all the heteroclusters were almost the same, although structural distortion should become larger, as the number of quenchers increased. An asymmetric heterocluster of a single fluorophore and two quenchers showed larger excitonic interaction (i.e., hypochromicity of Cy3), than did a single Cy3 and a single quencher. Due to the larger exciton coupling between the dyes, the 1:2 heterocluster suppressed the background emission more efficiently than the 1:1 cluster. However, more quenchers did not enhance quenching efficiency due to the saturation of exciton coupling with two quenchers. Finally, this asymmetric 1:2 heterocluster was introduced into the stem region of a molecular beacon (MB; also known as an in-stem MB) targeting the fusion site in the L6 BCR-ABL fusion gene. With this MB design, the signal/background ratio was as high as 68 due to efficient suppression of background emission resulting from the maximized excitonic interaction., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Organization of supramolecular assemblies of chromophores with precisely-controlled orientation and sequence remains challenging. Nucleic acids with complementary base sequences spontaneously form double-helical structures. Therefore, covalent attachment of chromophores to DNA or RNA can be used to control assembly and orientation of chromophores. In this perspective, we first review our recent work on the assemblies of fluorophores (pyrene and perylene) by using natural base pairs. The interaction between dyes can be strictly controlled by means of cluster and interstrand wedge motifs. We then discuss novel artificial base pairs that can suppress the interaction between fluorophores and nucleobases. We incorporated a cyclohexane moiety into DNA, and showed that these artificial base pairs suppressed the electron-hole transfer between fluorophores and nucleobases and enhanced the quantum yields of fluorophores. These base pairs can potentially be used to accumulate fluorophores inside DNA duplexes without decreasing quantum yields.

By using perylene and pyrene as fluorophores, we have designed various fluorophore assemblies that mimic inorganic quantum dots in showing a high emission intensity, a large Stokes' shift, and a modulated emission maximum. For this purpose, we utilized two kinds of duplex motifs with D-threoninols as scaffolds: cluster and interstrand-wedged motifs. In the cluster motif, fluorophores are introduced into both strands to produce tentative pseudo-"base-pairs", in which the dyes strongly interact with each other and form dimers, trimers, or hexamers. In the interstrand-wedged motif, a base-pair is inserted between the fluorophores to suppress their direct interaction. These two motifs were applied to accumulate dyes within a DNA duplex, depending on their emission properties. Since pyrene exhibits strong excimer emission, the emission at 500 nm of a pyrene cluster motif strongly increased as the number of accumulated dyes increased, whereas the interstrand-wedged motif quenched pyrene monomer emission. In contrast, assembled perylenes, which are mostly quenched by dimerization, showed intense monomer emission in the interstrand-wedged motif, whereas perylene cluster motifs strongly suppressed perylene emission. These two motifs were then applied to the heteroassembly of pyrenes and perylenes. Both a large Stokes' shift and a modulation of the emission maximum, which are also characteristics of inorganic quantum dots, were successfully realized using fluorescent resonance energy transfer (FRET) and exciplex formation. These fluorophore assemblies thus obtained could be enzymatically ligated to longer DNA, demonstrating that this technique has the potential to be a versatile labeling agent for biomolecules.

Brooker's merocyanine (BM), which changes its emission and absorption maxima upon protonation, was introduced into oligodeoxyribonucleotide (ODN) via d-threoninol by postsynthetic modification on a CPG (controlled-pore glass) support. The pK(a) of BM in the modified ODN increased from 9.5 to 10.1 upon hybridization. As a result, absorption maxima shifted from 492 to 432 nm at pH 10.0 by the presence of its complementary strand. This spectral shift was sufficiently large so that DNA hybridization could easily be discriminated even by the naked eye; the color of the solution changed from orange to yellow upon hybridization. In addition, the fluorescence emission was strongly quenched upon hybridization, demonstrating that this probe can also detect the target DNA by the fluorescence change. Ratiometric detection of hybridization was also possible by simultaneous excitation of both protonated and deprotonated BMs. Furthermore, we could also modulate its pK(a) by the antiparallel stacking of two BM molecules in the duplex; the pK(a) of BM decreased from 10.1 to 9.7 by the stacking of two BMs in an antiparallel manner. Thus, control of the microenvironment around the BM molecule allowed modulation of its pK(a), which is applicable to the sequence-specific recognition of target DNA.

Pyrene (donor) and perylene (acceptor) were assembled in a DNA duplex to increase the apparent Stokes' shift of perylene. Multiple donors were introduced in the vicinity of acceptors via D-threoninol and natural base pairs were inserted between donors and acceptors in order to suppress undesired interactions between them. When two pyrene moieties were located in proximity to one perylene with one base pair inserted between them, efficient FRET occurred within the duplex. Thus, strong emission at 495 nm was observed from perylene when excited at 345 nm where pyrene has its absorption. The apparent Stokes' shift became as large as 115 nm with a high FRET efficiency (Phi>1). However, the introduction of more than two pyrenes did not enhance the fluorescence intensity of perylene, due to the short Förster radius (R(0)) of the donor pyrene.

Novel dye aggregates ("comb-type" aggregates) was prepared by hybridizing modified oligodeoxyribo-nucleotides (ODNs), in which dyes were introduced consecutively. From NMR structural analysis, dye molecules were intercalated between base pairs and stacked in anti-parallel manner. When ODNs containing three Methyl Red moieties were hybridized, strong exciton coupling was observed. In addition, thermal stability of duplex was substantially enhanced due to the intermolecular stacking.

Modified oligodeoxyribonucleotides (ODNs) involving two perylene moieties are synthesized. By using this ODN, one-base deletion can easily be distinguished with high sensitivity. In addition, emission color of the solution greatly changed so that the detection was possible even by naked eyes.

Abstract: The optical behavior of an organized dye assembly is different from that of the isolated dye; this difference is explained using molecular exciton theory. The theory predicts that mutual orientation, the number of dyes in the cluster, and combinations of different dyes should display given characteristic spectroscopic behaviors due to coherent interactions. Comparison of theoretical predictions with experimental results has been limited so far. One of the reasons is the absence of a rigid and well-organized system that can control the orientation and size of the dye assembly. Recently, the DNA duplex has been used to assemble chromophores in a programmed manner. Use of DNA allows organized dye assembly with a given size and particular orientation. In this review, we evaluate the spectroscopic behavior of the H-type aggregate based on molecular exciton theory and compare it with actual dye assembly with DNA duplex. Furthermore, we demonstrate the importance of coherent interactions on the observed optical properties of dyes assembled in a DNA duplex. [Copyright &y& Elsevier]