Search

The pollution on insulators is composed of various chemical components, which threaten the stability of external insulation. However, the existing insulation designs have not taken this issue into consideration. This work aimed to study the influence of pollution chemical components on flashover performance of insulators with various materials. Flashover tests of porcelain, glass and silicone rubber insulators polluted by eight types of common contaminants were conducted. Based on the test data, the influence of chemical components and their solubility on equivalent salt deposit density (ESDD) and insulator flashover performance were analysed; and the electrical properties of different types of insulators were compared. Results show that the ESDD contribution rate changes with chemical components. The dissolution characteristic has a significant influence on the measurement of ESDD; slightly soluble contaminants need to be considered separately. The corresponding insulator flashover gradient for ions can be summarised as Cl^−

Currently, it is founded that under unidirectional wind and certain landform, composite insulators are always fan-shaped non-uniformly polluted. In this paper, artificial pollution tests on three types of composite insulators with different shed configurations and under various fan-shaped non-uniform pollution conditions were carried out. Then the flashover performances of composite insulators, porcelain insulators and glass insulators were compared. Results indicate that there is a big difference between ac flashover performance of composite insulators under non-uninform pollution and uninform pollution. The flashover voltage of composite insulator is largely influenced by salt deposit density (SDD), the ratio of SDD of windward side to leeward side (W/L), the occupation ratio of leeward side k and the shed configurations. The relationship between SDD and U(50) still meets negative power function when composite insulator is fan-shaped non-uninform polluted. There is a reduction of 17.8–27.6% in the flashover strength when the ratio W/L of SDD decreases from 1/1 to 1/15. The shed configurations of composite insulators have great effects on the flashover performance. Composite insulators always have better withstand property compared to glass and porcelain insulators under either uniform pollution or fan-shaped non-uniform pollution.

Under dc electric field, pollution may be more easily deposited around insulator string caps and pins, distributing non-uniformly on its inner and outer parts, and presenting ring-like shape. dc Flashover tests of 7-unit XHP-160 insulator string were carried out. During the tests, the ring-shaped non-uniform pollution was simulated using solid-layer method by changing the ratio I/O of inner-to-outer surface salt deposit density (SDD) and radius (r) of the heavily polluted area (the inner part). On the basis of the test data, the effects of ring-shaped non-uniform pollution on dc flashover characteristics were studied. Then, the relative variation trend of flashover voltage, surface pollution layer resistance, and leakage current were discussed. Research results show that the ratio I/O affects the dc flashover performance of the insulator string. The flashover voltage increases with the increase of I/O. With the increase of the radius r, the flashover voltage will increase at first and then decrease. Under ring-shaped non-uniform pollution, surface pollution layer resistance of insulator will increase, which results in lower leakage current and higher flashover voltage. The results will be of certain value in providing references for outdoor insulation selection.

In the current study, a multi-arc predicting model for DC critical flashover voltage of iced and pre-contaminated long insulator strings under low atmospheric pressure is developed. The model is composed of a series of different polarity surface arcs, icicle-icicle air gap arcs, and residual layer resistance. The calculation method of the residual resistance of the ice layer under DC multi-arc condition is established. To validate the model, 7-unit and 15-unit insulator strings were tested in a multi-function artificial climate chamber under the coexistent conditions of low air pressure, pollution, and icing. The test results showed that the values calculated by the model satisfactorily agreed with those experimentally measured, with the errors within the range of 10%, validating the rationality of the model.

The possibility of insulator flashover would be higher with the increase in icing degree. Therefore, the method of monitoring the icing weight of the insulator is of vital importance. In this study, the estimation method of icing weight on composite insulator in rime icing was proposed. By quite a few experiments under different rime icing conditions, results showed good agreement between estimated value and measured icing weight. Therefore, the estimation method of icing weight proposed by this study was effective and may be used for predicting icing weight. Based on the estimation method, this study discusses the effect of key structural parameters of composite insulator under different rime conditions on icing weight. In order to better apply the composite insulator to electric transmission line in icing area, several suggestions on design optimisation of structural parameters are proposed. [ABSTRACT FROM AUTHOR]

DC flashover performance of ice-covered composite insulators with a parallel air gap (CI/PAG) is an important technical consideration when such insulators are used to isolate ground wires for the purpose of DC ice-melting. Tests on tension and suspension types of CI/PAG were thus carried out in the artificial climate chamber to investigate their DC icing flashover performance. The influences of parallel air gap, ice thickness, pollution severity and air pressure on DC negative 50% flashover voltage (U50%) of CI/PAG were investigated. Test results show that the parallel air gap affected both the discharge path and U50%. With increasing ice thickness, U50% declined by up to 52%; this effect was more evident when the breakdown occurred in the air gap. The pollution severity affected U50% only when the flashover happened along insulator surface. With a decrease of atmospheric pressure, U50% decreased. U50% and the ratio of air pressure were in a power function relationship with a positive characteristic exponent which was relevant to the discharge path. [ABSTRACT FROM AUTHOR]

The pollution flashover performance of insulators is generally tested by the steam fog method. However, environmental temperature in tests differs greatly, so the dispensability of test results is high. Moreover, the influence of fog‐water conductivity has not been taken into account. Compared with the steam fog method, the cold‐fog method simulating natural fog is more consistent with the actual operating conditions of transmission line insulators. This deals with the influence of salt deposit density (SDD) and fog‐water conductivity on pollution flashover performance. The influence of the two factors is determined by analysing the results of laboratory experiments where polluted insulators were tested by using the cold‐fog method. The results show that the 50% AC pollution flashover voltage (U50) decreases as SDD and fog‐water conductivity increase. The correction coefficient (K) indicating the influence of fog‐water conductivity on U50 can be expressed as an exponential function, where the factors are 0.0476, 0.0587 and 0.0567 for samples A, B and C, respectively. [ABSTRACT FROM AUTHOR]

In the current study, a multi-arc predicting model for DC critical flashover voltage of iced and pre-contaminated long insulator strings under low atmospheric pressure is developed. The model is composed of a series of different polarity surface arcs, icicle-icicle air gap arcs, and residual layer resistance. The calculation method of the residual resistance of the ice layer under DC multi-arc condition is established. To validate the model, 7-unit and 15-unit insulator strings were tested in a multi-function artificial climate chamber under the coexistent conditions of low air pressure, pollution, and icing. The test results showed that the values calculated by the model satisfactorily agreed with those experimentally measured, with the errors within the range of 10%, validating the rationality of the model. [ABSTRACT FROM AUTHOR]

The external insulation of electric equipments will be affected by the atmospheric conditions in the high altitude regions. However, a few investigations at the high altitude sites of 3000 m and above have been conducted. This paper reports on the laboratory tests of artificially polluted cap-and-pin porcelain insulators performed at the high altitudes of 2800 m to 4500 m. The test results and analysis show that the pollution flashover voltages in high altitude regions are affected not only by the pollution grades but also by the atmospheric parameters. The exponent characterizing the influence of equivalent salt deposit density is 0.26 to 0.29 and the one characterizing the influence of nonsoluble deposit density is 0.09 to 0.15. The ac pollution flashover voltage Uf will decrease with the decrease of air pressure P and increase with the decrease of ambient temperature t. Uf is a power function of the ration of air pressure P/Po and also is a power function of the ambient temperature coefficient (1 + 0.02(t - 20)). The average exponent characterizing the influence of air pressure is about 0.56 and the exponent characterizing the influence of ambient temperature is about 0.21 for the three types of insulators in the paper. [ABSTRACT FROM AUTHOR]

This paper explores the influence of air pressure, temperature and humidity on the switching impulse (SI) flashover performance of different types of clean and dry insulators at different high altitude sites of 2820 m to 5050 m along the Qinghai-Tibet Railway, the highest elevation railway in the world. Seven types of insulators are used in the flashover tests: one is a composite insulator, two are glass insulators and four are porcelain insulators. At the test sites, the ambient temperature varies between 6.7 °C to 28.5 °C and the absolute humidity is between 4.11 g/m³ to 9.69 g/m³. The test results show that the 50% switching impulse flashover voltage of different types of insulators at high altitude sites is independent of the materials and sheds of insulators but has a multi-factor non-linear relation with the shortest arc distance, the dry air pressure, the absolute humidity and the ambient temperature. The relative flashover voltage decreased with the ambient temperature is dependent on the voltage polarity, with 0.152% to 0.165% 1°C for negative SI and 0.099% to 0.108% 1°C for positive SI at the ambient temperature of from 6.7 °C to 28.5 °C. The relative flashover voltage increased with the absolute humidity and is dependent on the air pressure. The higher the altitude is, the more the influence is of the absolute humidity on the flashover voltage of insulators. [ABSTRACT FROM AUTHOR]

Based on the artificial pollution tests, the effects of pollution and high altitude on the flashover performance of short samples of five kinds of UHV/EHV dc composite long rod insulators are analyzed. The exponent characterizing the influence of salt deposit density on the flashover voltage is related with the profile and the material of the insulator shed. The values of the samples' exponents vary between 0.24 and 0.30, which are smaller than those of porcelain or glass cap-and-pin insulators, namely, the influence of the pollution on the composite long rod insulators is less, relatively. Thus, the composite insulators have certain advantages in severe pollution regions. The best ratio of the leakage distance to the arcing distance is about 3.35. The exponent characterizing the influence of air pressure on the flashover voltage is related with the profile and the material of the insulator shed and the pollution severity, the values of the samples' exponents vary between 0.6 and 0.8, which are larger than those of porcelain or glass cap-and-pin insulators. Therefore, the dc composite insulator used in high altitude regions should have enough arcing distance. Based on the test results, if insulator sample Type E is selected for the ±800 kV UHV dc transmission lines, the basic arcing distance should be no less than 8.16 m and the basic leakage distance no less than 30.2 m. [ABSTRACT FROM AUTHOR]