Search

To enable next‐generation high‐power, high‐energy‐density lithium (Li) metal batteries (LMBs), an electrolyte possessing both high Li Coulombic efficiency (CE) at a high rate and good anodic stability on cathodes is critical. Acetonitrile (AN) is a well‐known organic solvent for high anodic stability and high ionic conductivity, yet its application in LMBs is limited due to its poor compatibility with Li metal anodes even at high salt concentration conditions. Here, a highly concentrated AN‐based electrolyte is developed with a vinylene carbonate (VC) additive to suppress Li+ depletion at high current densities. Addition of VC to the AN‐based electrolyte leads to the formation of a polycarbonate‐based solid electrolyte interphase, which minimizes Li corrosion and leads to a very high Li CE of up to 99.2% at a current density of 0.2 mA cm‐2. Using such an electrolyte, fast charging of Li||NMC333 cells is realized at a high current density of 3.6 mA cm‐2, and stable cycling of Li||NMC622 cells with a high cathode loading of 4 mAh cm‐2 is also demonstrated. [ABSTRACT FROM AUTHOR]

Abstract: The instability of lithium (Li) metal anodes due to dendritic growth and low Coulombic efficiency (CE) hinders the practical application of high‐energy‐density Li metal batteries. Here, the systematic studies of improving the stability of Li metal anodes and the electrochemical performance of Li metal batteries through the addition of combinational additives and the optimization of solvent compositions in dual‐salt/carbonate electrolytes are reported. A dendrite‐free and high CE of 98.1% for Li metal anode is achieved. The well‐protected Li metal anode and the excellent cyclability and rate capability of the 4‐V Li metal batteries are obtained. This is attributed to the formation of a robust, denser, more polymeric, and higher ionic conductive surface film on the Li metal anode via the electrochemical reductive decompositions of the electrolyte components and the ring‐opening polymerization of additives and cyclic carbonate solvents. The key findings of this work indicate that the optimization of solvent compositions and the manipulation of additives are facile and effective ways to enhance the performances of Li metal batteries. [ABSTRACT FROM AUTHOR]

High energy and cost-effective lithium sulfur (Li-S) battery technology has been vigorously revisited in recent years due to the urgent need of advanced energy storage technologies for green transportation and large-scale energy storage applications. However, the market penetration of Li-S batteries has been plagued due to the gap in scientific knowledge between the fundamental research and the real application need. Here, a facile and effective approach to integrate commercial carbon nanoparticles into microsized secondary ones for application in high loading sulfur electrodes is proposed The slurry with the integrated particles is easily cast into electrode laminates with practically usable mass loadings. Uniform and crack-free coating with high loading of 2-8 mg cm−2 sulfur are successfully achieved. Based on the obtained thick electrodes, the dependence of areal specific capacity on mass loading, factors influencing electrode performance, and measures used to address the existing issues are studied and discussed. [ABSTRACT FROM AUTHOR]

Due to the limited oxidation stability (<4 V) of ether oxygen in its polymer structure, polyethylene oxide (PEO)‐based polymer electrolytes are not compatible with high‐voltage (>4 V) cathodes, thus hinder further increases in the energy density of lithium (Li) metal batteries (LMBs). Here, a new type of polymer‐in‐"quasi‐ionic liquid" electrolyte is designed, which reduces the electron density on ethereal oxygens in PEO and ether solvent molecules, induces the formation of stable interfacial layers on both surfaces of the LiNi1/3Mn1/3Co1/3O2 (NMC) cathode and the Li metal anode in Li||NMC batteries, and results in a capacity retention of 88.4%, 86.7%, and 79.2% after 300 cycles with a charge cutoff voltage of 4.2, 4.3, and 4.4 V for the LMBs, respectively. Therefore, the use of "quasi‐ionic liquids" is a promising approach to design new polymer electrolytes for high‐voltage and high‐specific‐energy LMBs. [ABSTRACT FROM AUTHOR]

Silicon anodes are regarded as one of the most promising alternatives to graphite for high energy‐density lithium‐ion batteries (LIBs), but their practical applications have been hindered by high volume change, limited cycle life, and safety concerns. In this work, nonflammable localized high‐concentration electrolytes (LHCEs) are developed for Si‐based anodes. The LHCEs enable the Si anodes with significantly enhanced electrochemical performances comparing to conventional carbonate electrolytes with a high content of fluoroethylene carbonate (FEC). The LHCE with only 1.2 wt% FEC can further improve the long‐term cycling stability of Si‐based anodes. When coupled with a LiNi0.3Mn0.3Co0.3O2 cathode, the full cells using this nonflammable LHCE can maintain >90% capacity after 600 cycles at C/2 rate, demonstrating excellent rate capability and cycling stability at elevated temperatures and high loadings. This work casts new insights in electrolyte development from the perspective of in situ Si/electrolyte interphase protection for high energy‐density LIBs with Si anodes. [ABSTRACT FROM AUTHOR]

As electronic devices continue to become smaller, their energy sources (i.e., batteries) also need to be smaller. Typically, energy densities of batteries decrease as the battery size decreases due to the relative increase of parasitic weight such as packaging materials. In addition, the sealing methods in conventional batteries are difficult to apply to microbatteries. In this work, we developed a facile sealing method for microbatteries. The method employs a dual-sealing concept: a first rubber barrier temporally confines the organic electrolytes and a second adhesive barrier forms a hermetic seal with the battery case. With this innovative sealing approach, excellent shelf life and operation life of the batteries have been demonstrated. A minimal amount of packing materials is employed resulting in high energy densities. [ABSTRACT FROM AUTHOR]