Search

Efficient energy storage from intermittent renewables can rely on the conversion of temporary energy excess by alkaline electrolysis, yielding oxygen and green hydrogen, which can be stored and used on demand. Electrodes made of laser-induced graphene (LIG) materials offer many advantages over the traditional graphene processing routes, due to inherent simplicity and low cost-benefit. Despite poorly studied, LIG electrodes are promising for water splitting when properly doped/modified with metals. However, proper design and processing optimization should be considered. The present study is devoted to the laser processing effects on the LIG electrode performance towards water splitting in alkaline media. Promising guidelines were obtained for hydrogen production, showing high electrochemical activity, while the microstructural degradation can be minimised by selecting suitable laser processing conditions, such as 3.6 W of laser power, 100 mm/s of laser scan rate, 36 mJ/mm of energy density and 2 laser scans. • Laser processing affects the LIG electrode performance during water splitting. • Effects of laser power, scan rate, energy density and laser scans were studied. • Low laser power is an essential processing parameter for the LIG's stability. [ABSTRACT FROM AUTHOR]

Abstract Graphene has emerged as a novel material with enhanced electrical and structural properties that can be used for a multitude of applications from super-capacitors to biosensors. In this context, an ultra-sensitive biosensor was developed using a low-cost, simple and mask-free method based on laser-induced graphene technique for electrodes patterning. The graphene was produced on a polyimide substrate, showing a porous multi-layer structure with a resistivity of 102.4 ± 7.3 Ω/square. The biosensor was designed as a 3-electrode system. Auxiliary and working electrodes were made of graphene by laser patterning and the reference electrode was handmade by casting a silver ink. A molecularly-imprinted polymer (MIP) was produced at the working electrode by direct electropolymerization of eriochrome black T (EBT). As proof-of-concept, the MIP film was tailored for chloramphenicol (CAP), a common contaminant in aquaculture. The resulting device was evaluated by cyclic voltammetry and electrochemical impedance spectroscopy readings against a redox standard probe. The limit of detection (LOD) was 0.62 nM and the linear response ranged from 1 nM to 10 mM. These analytical features were better than those produced by assembling the same biorecognition element on commercial graphene- and carbon-based screen-printed electrodes. Overall, the simplicity and quickness of the laser-induced graphene technique, along with the better analytical features obtained with the graphene-based electrodes, shows the potential to become a commercial approach for on-site sensing. Highlights • Ultra-sensitive graphene-based biosensor developed by a low cost and mask-free method using laser-induced graphene technique. • Detection of chloramphenicol with a LOD of 0.62 nM. • Combination of molecularly-imprinting technology with laser-induced graphene. • Promising approach for future quantitative biosensing. [ABSTRACT FROM AUTHOR]