Search

Marine oil dispersants typically contain blends of surfactants dissolved in solvents. When introduced to the crude oil-seawater interface, dispersants facilitate the breakup of crude oil into droplets that can disperse in the water column. Recently, questions about the environmental persistence and toxicity of commercial dispersants have led to the development of "greener" dispersants consisting solely of food-grade surfactants such as l-α-phosphatidylcholine (lecithin, L) and polyoxyethylenated sorbitan monooleate (Tween 80, T). Individually, neither L nor T is effective at dispersing crude oil, but mixtures of the two (LT blends) work synergistically to ensure effective dispersion. The reasons for this synergy remain unexplained. More broadly, an unresolved challenge is to be able to predict whether a given surfactant (or a blend) can serve as an effective dispersant. Herein, we investigate whether the LT dispersant effectiveness can be correlated with thermodynamic phase behavior in model systems. Specifically, we study ternary "DOW" systems comprising LT dispersant (D) + a model oil (hexadecane, O) + synthetic seawater (W), with the D formulation being systematically varied (across 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 L:T weight ratios). We find that the most effective LT dispersants (60:40 and 80:20 L:T) induce broad Winsor III microemulsion regions in the DOW phase diagrams (Winsor III implies that the microemulsion coexists with aqueous and oil phases). This correlation is generally consistent with expectations from hydrophilic-lipophilic deviation (HLD) calculations, but specific exceptions are seen. This study then outlines a protocol that allows the phase behavior to be observed on short time scales (ca. hours) and provides a set of guidelines to interpret the results. The complementary use of HLD calculations and the outlined fast protocol are expected to be used as a predictive model for effective dispersant blends, providing a tool to guide the efficient formulation of future marine oil dispersants.

“Smart” fluids displaying large changes in their rheological properties in response to external stimuli have been of great interest in recent years. For example, “smart” wormlike micelles (WLMs) that respond to pH can be readily formulated by combining a cationic surfactant such as cetyltrimethylammonium bromide (CTAB) with an aromatic compound such as 1,2-dihydroxybenzene (DHB). Here, we show that a pH-responsive aqueous formulation as mentioned above can be simultaneously made responsive to ultraviolet (UV) light by incorporating a photoacid generator (PAG) into the system. A commercially available PAG, diphenyliodonium-2-carboxylate, is used here. Upon exposure to UV light, this PAG irreversibly photolyzes into iodobenzene (IB) and benzoic acid (BA), with the formation of BA, leading to a drop in pH. WLMs formed by mixtures of CTAB, DHB, and the PAG are systematically characterized before and after UV irradiation. As the PAG photolyzes, an increase in the viscosity of WLMs occurs by a factor of 1000. We show that the ratio of the zero-shear viscosity η0 (after UV/before UV) depends on the initial pH of the sample. The UV-induced increase in η0 can be attributed to the growth of WLMs in solution, which in turn is influenced by both the ionization state of DHB and the presence of IB and BA.

Hydrogels of biopolymers such as agar and gelatin are widely used in many applications, and in many cases, the gels are loaded with nanoparticles. The polymer chains in these gels are cross-linked by physical bonds into three-dimensional networks, with the mesh size of these networks typically being 10-100 nm. One class of "soft" nanoparticles are liposomes, which have an aqueous core surrounded by a lipid bilayer. Solutes encapsulated in the liposomal core can be delivered externally over time. In this paper, we create liposomes with diameters ∼150 nm from an unsaturated phospholipid (lecithin) and embed them in agar gels (the aqueous phase also contains 0-50% of glycerol, which is an active ingredient in cosmetic products). Upon placing this gel in quiescent water, we find that the liposomes release out of the gel into the water over a period of 1-3 days, even though the gel remains intact.

Wormlike micelles (WLMs) are polymer-like chains formed by surfactant self-assembly in water. Recently, we have shown that WLMs can also be self-assembled in polar organic liquids like glycerol using a cationic surfactant and an aromatic salt. In this work, we focus on the dynamic rheology of the WLMs in glycerol and demonstrate that their rheology is very different from that of WLMs in water. Aqueous WLMs that are entangled into transient networks exhibit the rheology of a perfect Maxwell fluid having a single relaxation time tR-thereby, their elastic modulus G' and viscous modulus G″ intersect at a crossover frequency ωc = 1/tR. WLMs in glycerol also form entangled networks, but they are not Maxwell fluids; instead, they exhibit a double-crossover of G' and G″ (at ωc1 and ωc2) within the ω-window accessible by rheometry (10-2 to 102 rad/s). The first crossover at ωc1 (∼1 rad/s) corresponds to the terminal relaxation time (i.e., the timescale for chains to disentangle from the transient network and relax by reptation). At the other extreme, at frequencies above ωc2 (which is ∼10 rad/s), the rheology is dominated by the segmental motion of the chains. This "breathing regime" has rarely been accessed via experiments for aqueous WLMs because it falls around 105 rad/s. We believe that glycerol, a solvent that is much more viscous than water, exerts a crucial influence in pushing ωc2 to 1000-fold lower frequencies. On the basis of the rheology, we also hypothesize that WLMs in glycerol are shorter and weakly entangled compared to WLMs in water. Moreover, we suggest that WLMs in glycerol are "unbreakable" chains-i.e., the chains remain mostly intact instead of breaking and re-forming frequently-and this polymer-like behavior explains why the samples are quite unlike Maxwell fluids.

Recent success in extending the electrochemical stability window of aqueous electrolytes to 3.0 V by using 21 mol kg-1 “water-in-salt” (WiS) has raised a high expectation for developing safe aqueous Li-ion batteries. However, the most compatible Li4Ti5O12 anodes still cannot use WiS electrolyte due to the cathodic limit (1.9 V vs. Li/Li+). Herein, a UV-curable hydrophilic polymer is introduced to further extend the cathodic limit of WiS electrolytes and replace the separator. In addition, a localized strongly basic solid polymer electrolyte (SPE) layer is coated on the anode to promote the formation of an LiF-rich SEI. The synthetic impacts of UV-crosslinking and local alkaline SPE on the anodes extend the electrochemical stability window of the solid-state aqueous polymer electrolyte to ∼3.86 V even at a reduced salt concentration of 12 mol kg−1. It enables a separator-free LiMn2O4//Li4Ti5O12 aqueous full cell with a practical capacity ratio (P/N = 1.14) of the cathode and anode to deliver a steady energy density of 151 W h kg−1 at 0.5C with an initial Coulombic efficiency of 90.50% and cycled for over 600 cycles with an average Coulombic efficiency of 99.97%, which has never been reported before for an aqueous LiMn2O4//Li4Ti5O12 full cell. This flexible and long-duration aqueous Li-ion battery with hydrogel WiSE can be widely used as a power source in wearable devices and electrical transportations where both energy density and battery safety are of high priority. An ultra-thick LTO electrode with UV-curable polymer electrolyte as the binder is demonstrated as a solid state battery electrode. And a high-voltage (7.4 V) solid-state bipolar cell is assembled with a solid-state UV-curable polymer as the electrolyte.

The self-assembly of lipids into nanoscale vesicles (liposomes) is routinely accomplished in water. However, reports of similar vesicles in polar organic solvents like glycerol, formamide, and ethylene glycol (EG) are scarce. Here, we demonstrate the formation of nanoscale vesicles in glycerol, formamide, and EG using the common phospholipid lecithin (derived from soy). The samples we study are simple binary mixtures of lecithin and the solvent, with no additional cosurfactants or salt. Lecithin dissolves readily in the solvents and spontaneously gives rise to viscous fluids at low lipid concentrations (∼2-4%), with structures ∼200 nm detected by dynamic light scattering. At higher concentrations (>10%), lecithin forms clear gels that are strongly birefringent at rest. Dynamic rheology confirms the elastic response of gels, with their elastic modulus being ∼20 Pa at ∼10% lipid. Images from cryo-scanning electron microscopy (cryo-SEM) indicate that concentrated samples are "vesicle gels," where multilamellar vesicles (MLVs, also called "onions"), with diameters between 50 and 600 nm, are close-packed across the sample volume. This structure can explain both the elastic rheology as well as the static birefringence of the samples. The discovery of vesicles and vesicle gels in polar solvents widens the scope of systems that can be created by self-assembly. Interestingly, it is much easier to form vesicles in polar solvents than in water, and the former are stable indefinitely, whereas the latter tend to aggregate or coalesce over time. The stability is attributed to refractive index-matching between lipid bilayers and the solvents, i.e., these vesicles are relatively "invisible" and thus experience only weak attractions. The ability to use lipids (which are "green" or eco-friendly molecules derived from renewable natural sources) to thicken and form gels in polar solvents could also prove useful in a variety of areas, including cosmetics, pharmaceuticals, and lubricants.

Amphiphilic biopolymers such as hydrophobically modified chitosan (hmC) have been shown to convert liquid blood into elastic gels. This interesting property could make hmC useful as a hemostatic agent in treating severe bleeding. The mechanism for blood gelling by hmC is believed to involve polymer-cell self-assembly, i.e., insertion of hydrophobic side chains from the polymer into the lipid bilayers of blood cells, thereby creating a network of cells bridged by hmC. Here, we probe the above mechanism by studying dilute mixtures of blood cells and hmC in situ using optical microscopy. Our results show that the presence of hydrophobic side chains on hmC induces significant clustering of blood cells. The extent of clustering is quantified from the images in terms of the area occupied by the 10 largest clusters. Clustering increases as the fraction of hydrophobic side chains increases; conversely, clustering is negligible in the case of the parent chitosan that lacks hydrophobes. Moreover, the longer the hydrophobic side chains, the greater the clustering (i.e., C12 > C10 > C8 > C6). Clustering is negligible at low hmC concentrations but becomes substantial above a certain threshold. Finally, clustering due to hmC can be reversed by adding the supramolecule α-cyclodextrin, which is known to capture hydrophobes in its binding pocket. Overall, the results from this work are broadly consistent with the earlier mechanism, albeit with a few modifications.

Li-S batteries have been considered promising candidates for the next-generation energy storage devices because of their extremely high energy densities and low cost. However, Li dendrite formation/dissolution and shuttle of high-order polysulfides prevent their practical applications. Herein, we demonstrate a highly concentrated electrolyte, 12 M lithium bis(fluorosulfonyl)imide (LiFSI) salt in DME solvent (12 M LiFSI/DME), that can effectively suppress both the Li dendritic growth on the anode and the polysulfide shuttle reactions on the cathode side. The highly concentrated electrolyte along with the robust solid electrolyte interphase (SEI) formed therein play the key role in achieving high coulombic efficiencies for both Li stripping/plating (> 99.2%) and S cathode (> 99.7%). Based on the in-depth understanding of the interactions between electrodes and highly concentrated electrolyte, we designed a novel dilute electrolyte (1 M LiFSI/HFE + DME), which achieves similar electrochemical performances in Li-S batteries as the concentrated electrolytes. These Li-S batteries with the highest CE for Li anode and sulfur cathode maintains a high reversible capacity of 786 mA h/g at 0.1 A/g after 300 cycles, or 644 mA h/g at 300th cycle even at 1 A/g without any detectable shuttle reactions.

Dispersants, used in the mitigation of oil spills, are mixtures of amphiphilic molecules (surfactants) dissolved in a solvent. The recent large-scale use of dispersants has raised environmental concerns regarding the safety of these materials. In response to these concerns, our lab has developed a class of eco-friendly dispersants based on blends of the food-grade surfactants, soy lecithin (L) and Tween 80 (T), in a solvent. We have shown that these "L/T dispersants" are very efficient at dispersing crude oil into seawater. The solvent for dispersants is usually selected based on factors like toxicity, volatility, or viscosity of the overall mixture. However, with regard to the dispersion efficiency of crude oil, the solvent is considered to play a negligible role. In this paper, we re-examine the role of solvent in the L/T system and show that it can actually have a significant impact on the dispersion efficiency. That is, the dispersion efficiency can be altered from poor to excellent simply by varying the solvent while keeping the same blend of surfactants. We devise a systematic procedure for selecting the optimal solvents by utilizing Hansen solubility parameters. The optimal solvents are shown to have a high affinity for crude oil and limited hydrophilicity. Our analysis further enables us to identify solvents that combine high dispersion efficiency, good solubility of the L/T surfactants, a low toxicity profile, and a high flash point.

We demonstrate the use of electric fields to rapidly form gels of the biopolymer alginate (Alg) in specific three-dimensional (3-D) shapes and patterns. In our approach, we start with a gel of the biopolymer agarose, which is thermoresponsive and hence can be molded into a specific shape. The agarose mold is then loaded with Ca2+ cations and placed in a beaker containing an Alg solution. The inner surface of the beaker is surrounded by aluminum foil (cathode), and a copper wire (anode) is stuck in the agarose mold. These are connected to a direct current (DC) power source, and when a potential of ∼10 V is applied, an Alg gel is formed in a shape that replicates the mold. Gelation occurs because the Ca2+ ions electrophoretically migrate away from the mold, whereupon they cross-link the Alg chains adjacent to the mold. At low Ca2+ (0.01 wt %), the Alg gel layer grows outward from the mold surface at a steady rate of about 0.8 mm/min, and the gel stops growing when the field is switched off. After a gel of d...

Wormlike micelles (WLMs) are long, flexible cylindrical chains formed by the self-assembly of surfactants in semidilute solutions. Scientists have been fascinated by WLMs because of their similarities to polymers, while at the same time, the viscoelastic properties of WLM solutions have made them useful in a variety of industrial applications. To date, most studies on WLMs have been performed in water (i.e., a highly polar liquid), while there are a few examples of "reverse" WLMs in oils (i.e., highly nonpolar liquids). However, in organic solvents with lower polarity than water such as glycerol, formamide, and ethylene glycol, there have been no reports of WLMs thus far. Here, we show that it is indeed possible to induce a long-tailed cationic surfactant to assemble into WLMs in several of these solvents. To form WLMs, the surfactant is combined with a "binding" salt, i.e., one with a large organic counterion that is capable of binding to the micelles. Examples of such salts include sodium salicylate and sodium tosylate, and we find self-assembly to be maximized when the surfactant and salt concentrations are near-equimolar. Interestingly, the addition of a simple, inorganic salt such as sodium chloride (NaCl) to the same surfactant does not induce WLMs in polar solvents (although it does so in water). Thus, the design rules for WLM formation in polar solvents are distinct from those in water. Aqueous WLMs have been characterized at temperatures from 25 °C and above, but few studies have examined WLMs at much lower (e.g., subzero) temperatures. Here, we have selected a surfactant with a very low Krafft point (i.e., the surfactant does not crystallize out of solution upon cooling due to a cis-unsaturation in its tail) and a low-freezing solvent, viz. a 90/10 mixture of glycerol and ethylene glycol. In these mixtures, we find evidence for WLMs that persist down to temperatures as low as -20 °C. Rheological techniques as well as small-angle neutron scattering (SANS) have been used to characterize the WLMs under these conditions. Much like their aqueous counterparts, WLMs in polar solvents show viscoelastic properties, and accordingly, these fluids could find applications as synthetic lubricants or as improved antifreezing fluids.

When administered intravenously, active targeting of drug nanocarriers (NCs) improves biodistribution and endocytosis. Targeting may also improve oral delivery of NCs to treat gastrointestinal (GI) pathologies or for systemic absoption. However, GI instability of targeting moieties compromises this strategy. We explored whether encapsulation of antibody-coated NCs in microcapsules would protect against gastric degradation, providing NCs release and targeting in intestinal conditions. We used nanoparticles coated with antibodies against intercellular adhesion molecule-1 (anti-ICAM) or non-specific IgG. NCs (~160-nm) were encapsulated in ~180-μm microcapsules with an alginate core, in the absence or presence of a chitosan shell. We found >95% NC encapsulation within microcapsules and

Liposomes are nanoscale containers that are typically synthesized from lipids using a high-shear process such as extrusion or sonication. While liposomes are extensively used in drug delivery, they do suffer from certain problems including limited colloidal stability and short circulation times in the body. As an alternative to liposomes, we explore a class of container structures derived from erythrocytes (red blood cells). The procedure involves emptying the inner contents of these cells (specifically hemoglobin) and resuspending the empty structures in buffer, followed by sonication. The resulting structures are termed nanoerythrosomes (NERs), i.e., they are membrane-covered nanoscale containers, much like liposomes. Cryo-transmission electron microscopy (cryo-TEM) and small-angle neutron scattering (SANS) are employed for the first time to study these NERs. The results reveal that the NERs are discrete spheres (∼110 nm diameter) with a unilamellar membrane of thickness ∼4.5 nm. Remarkably, the biconcave disc-like shape of erythrocytes is also exhibited by the NERs under hypertonic conditions. Moreover, unlike typical liposomes, NERs show excellent colloidal stability in both buffer as well as in serum at room temperature, and are also able to withstand freeze-thaw cycling. We have explored the potential for using NERs as colloidal vehicles for targeted delivery. Much like conventional liposomes, NER membranes can be decorated with fluorescent or other markers, solutes can be encapsulated in the cores of the NERs, and NERs can be targeted to specifically bind to mammalian cells. Our study shows that NERs are a promising and versatile class of nanostructures. NERs that are harvested from a patient's own blood and reconfigured for nanomedicine can potentially offer several benefits including biocompatibility, minimization of immune response, and extended circulation time in the body.

Molecular organogelators convert oils into gels by forming self-assembled fibrous networks. Here, we demonstrate that such gelation can be activated by contacting the oil with an immiscible solvent (water). Our gelator is dibenzylidene sorbitol (DBS), which forms a low-viscosity sol when added to toluene containing a small amount of dimethyl sulfoxide (DMSO). Upon contact with water, DMSO partitions into the water, activating gelation of DBS in the toluene. The gel grows from the oil/water interface and slowly envelops the oil phase. We have exploited this effect for the self-repair of oil leaks from underwater tubes. When a DBS/toluene/DMSO solution flows through the tube, it forms a gel selectively at the leak point, thereby plugging the leak and restoring flow. Our approach is reminiscent of wound-sealing via blood-clotting: there also, inactive gelators in blood are activated at the wound site into a fibrous network, thereby plugging the wound and restoring blood flow.

We report the ability of hydrophobically modified polypeptoids (HMPs), which are amphiphilic pseudopeptidic macromolecules, to connect across lipid bilayers and thus form layered structures on liposomes. The HMPs are obtained by attaching hydrophobic decyl groups at random points along the polypeptoid backbone. Although native polypeptoids (with no hydrophobes) have no effect on liposomal structure, the HMPs remodel the unilamellar liposomes into structures with comparable diameters but with multiple concentric bilayers. The transition from single-bilayer to multiple-bilayer structures is revealed by small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). The spacing between bilayers is found to be relatively uniform at ∼6.7 nm. We suggest that the amphiphilic nature of the HMPs explains the formation of multibilayered liposomes; i.e., the HMPs insert their hydrophobic tails into adjacent bilayers and thereby serve as the connective glue between bilayers. At higher HMP concentrations, the liposomes are entirely disrupted into much smaller micellelike structures through extensive hydrophobe insertion. Interestingly, these small structures can reattach to fresh unilamellar liposomes and self-assemble to form new two-bilayer liposomes. The two-bilayer liposomes in our study are reminiscent of two-bilayer organelles such as the nucleus in eukaryotic cells. The observations have significance in designing new nanoscale drug delivery carriers with multiple drugs on separate lipid bilayers and extending liposome circulation times with entirely biocompatible materials.

The self-assembly of biological surfactants in water is an important topic for study because of its relevance to physiological processes. Two common types of biosurfactants are lecithin (phosphatidylcholine) and bile salts, which are both present in bile and involved in digestion. Previous studies on lecithin-bile salt mixtures have reported the formation of short, rodlike micelles. Here, we show that lecithin-bile salt micelles can be further induced to grow into long, flexible wormlike structures. The formation of long worms and their resultant entanglement into transient networks is reflected in the rheology: the fluids become viscoelastic and exhibit Maxwellian behavior, and their zero-shear viscosity can be up to a 1000-fold higher than that of water. The presence of worms is further confirmed by data from small-angle neutron and X-ray scattering and from cryo-transmission electron microscopy (cryo-TEM). We find that micellar growth peaks at a specific molar ratio (near equimolar) of bile salt:lecithin, which suggests a strong binding interaction between the two species. In addition, micellar growth also requires a sufficient concentration of background electrolyte such as NaCl or sodium citrate that serves to screen the electrostatic repulsion of the amphiphiles and to "salt out" the amphiphiles. We postulate a mechanism based on changes in the molecular geometry caused by bile salts and electrolytes to explain the micellar growth.

We describe a new class of hierarchical containers that are formed via single-step assembly and, at a later time, self-destruct because of their packaged contents. These containers are spherical capsules formed by electrostatic complexation of the anionic biopolymer, gellan gum, with the cationic biopolymer, chitosan. The capsules are termed "motherships" and are engineered to carry a cargo of much smaller containers (e.g., nanoscale liposomes ("babyships")), within their lumen. Additionally, we package an enzyme, chitosanase, in the capsule that is capable of degrading polymeric chitosan into short oligomers. Thereby, we create motherships that self-destruct, liberating their cargo of babyships into the external solution. The time scale for self-destruction can be engineered based on the internal concentration of enzyme. The motherships are stable when stored in a freeze-dried form and can be readily dispersed into water or buffer solutions at a later time, whereupon their "internal clock" for self-destruction is initiated. The above concept could be useful for the triggered release of a variety of payloads including drugs, biological therapeutics, cosmetics, and flavor ingredients.

A series of glucono-appended 1-pyrenesulfonyl derivatives containing α,ω-diaminoalkane spacers (Pn, where n, the number of methylene units separating the amino groups, is 2, 3, 4, 6, 7, and 8) have been prepared. Careful analyses of correlations between the structures of these molecules and their gels have provided important insights into the factors responsible for one-dimensional aggregation of small molecules containing both lipophilic and hydrophilic parts. The gelation behavior has been examined in 30 liquids of diverse structure and polarity, and the properties of their gels and the gelation mechanisms have been investigated using a variety of techniques. Possible reasons are discussed regarding why the Pn are better gelators than the corresponding naphthyl analogues (Nn) which had been investigated previously. P2 and P3 are ambidextrous gelators (i.e., they gelate both water and some organic liquids), and P4-P8 gelate some organic liquids which are protic and aprotic, but not water. In at least one of the liquids examined, P3, P4, P6, P7, and P8 form gels at less than 1 w/v % concentrations, and some of the gels in 1-decanol are thixotropic. Analyses of the gelation abilities using Hansen solubility parameters yield both qualitative and quantitative insights into the role of liquid-gelator interactions. For example, the critical gelation concentrations increase generally with increasing polar and hydrogen bonding interactions between the gelators and their liquid components. As revealed by FT-IR, (1)H NMR, UV-vis, and fluorescence spectra, hydrogen-bonding between glucono units and π-π stacking between pyrenyl groups are important in the formation and maintenance of the gel networks. The results from this study, especially those relating the aggregation modes and liquid properties, offer insights for the design of new surfactant-containing low-molecular-mass gelators with predefined gelating abilities.

A photoresponsive micellar solution is developed as a promising working fluid for district heating/cooling systems (DHCs). It can be reversibly switched between a drag reduction (DR) mode and an efficient heat transfer (EHT) mode by light irradiation. The DR mode is advantageous during fluid transport, and the EHT mode is favored when the fluid passes through heat exchangers. This smart fluid is an aqueous solution of cationic surfactant oleyl bis(2-hydroxyethyl)methyl ammonium chloride (OHAC, 3.4 mM) and the sodium salt of 4-phenylazo benzoic acid (ACA, 2 mM). Initially, ACA is in a trans configuration and the OHAC/ACA solution is viscoelastic and exhibits DR (of up to 80% relative to pure water). At the same time, this solution is not effective for heat transfer. Upon UV irradiation, trans-ACA is converted to cis-ACA, and in turn, the solution is converted to its EHT mode (i.e., it loses its viscoelasticity and DR) but it now has a heat-transfer capability comparable to that of water. Subsequent irradiation with visible light reverts the fluid to its viscoelastic DR mode. The above property changes are connected to photoinduced changes in the nanostructure of the fluid. In the DR mode, the OHAC/trans-ACA molecules assemble into long threadlike micelles that impart viscoelasticity and DR capability to the fluid. Conversely, in the EHT mode the mixture of OHAC and cis-ACA forms much shorter cylindrical micelles that contribute to negligible viscoelasticity and effective heat transfer. These nanostructural changes are confirmed by cryo-transmission electron microscopy (cryo-TEM), and the photoisomerization of trans-ACA and cis-ACA is verified by (1)H NMR.

Methods that allow soft matter to be fabricated with controlled structure and function would be beneficial for applications ranging from flexible electronics to regenerative medicine. Here, the assembly of a multifunctional gelatin matrix is demonstrated by triggering its self-assembly and then enzymatically assembling biological functionality. Triggered self-assembly relies on electrodeposition of the pH-responsive hydrogelator, 9-fluorenylmethoxycarbonyl-phenylalanine (Fmoc-Phe), in response to electrical inputs that generate a localized pH-gradient. Warm solutions of Fmoc-Phe and gelatin are co-deposited and, after cooling to room temperature, a physical gelatin network forms. Enzymatic assembly employs the cofactor-independent enzyme microbial transglutaminase (mTG) to perform two functions: crosslink the gelatin matrix to generate a thermally stable chemical gel and conjugate proteins to the matrix. To conjugate globular proteins to gelatin these proteins are engineered to have short lysine-rich or glutamine-rich fusion tags to provide accessible residues for mTG-catalysis. Viable bacteria can be co-deposited and entrapped within the crosslinked gelatin matrix and can proliferate upon subsequent incubation. These results demonstrate the potential for enlisting biological materials and mechanisms to biofabricate multifunctional soft matter.

Biopolymers such as alginate and pectin are well known for their ability to undergo gelation upon addition of multivalent cations such as calcium (Ca(2+)). Here, we report a simple way to activate such ionic gelation by UV irradiation. Our approach involves combining an insoluble salt of the cation (e.g., calcium carbonate, CaCO(3)) with an aqueous solution of the polymer (e.g., alginate) along with a third component, a photoacid generator (PAG). Upon UV irradiation, the PAG dissociates to release H(+) ions, which react with the CaCO(3) to generate free Ca(2+). In turn, the Ca(2+) ions cross-link the alginate chains into a physical network, thereby resulting in a hydrogel. Dynamic rheological experiments confirm the elastic character of the alginate gel, and the gel modulus is shown to be tunable via the irradiation time as well as the PAG and alginate concentrations. The above approach is easily extended to other biopolymers such as pectin. Using this approach, a photoresponse can be imparted to conventional biopolymers without the need for any chemical modification of the molecules. Photoresponsive alginate gels may be useful in creating biomaterials or tissue mimics. As a step toward potential applications, we demonstrate the ability to photopattern a thin film of alginate gel onto a glass substrate under mild conditions.

We present a microfluidic method to direct the self-assembly of temperature-sensitive liposome-hydrogel hybrid nanoparticles. Our approach yields nanoparticles with structural properties and highly monodisperse size distributions precisely controlled across a broad range relevant to the targeted delivery and controlled release of encapsulated therapeutic agents. We used microfluidic hydrodynamic focusing to control the convective-diffusive mixing of two miscible nanoparticle precursor solutions (a DPPC:cholesterol:DCP phospholipid formulation in isopropanol and a photopolymerizable N-isopropylacrylamide mixture in aqueous buffer) to form nanoscale lipid vesicles with encapsulated hydrogel precursors. These precursor nanoparticles were collected off-chip and were irradiated with ultraviolet (UV) light in bulk to polymerize the nanoparticle interiors into hydrogel cores. Multiangle laser light scattering in conjunction with asymmetric flow field-flow fractionation was used to characterize nanoparticle size distributions, which spanned the approximately 150 to approximately 300 nm diameter range as controlled by microfluidic mixing conditions, with a polydispersity of approximately 3% to approximately 5% (relative standard deviation). Transmission electron microscopy was then used to confirm the spherical shape and core-shell composition of the hybrid nanoparticles. This method may be extended to the directed self-assembly of other similar cross-linked hybrid nanoparticle systems with engineered size/structure-function relationships for practical use in healthcare and life science applications.

Telechelic associating polymers (hydrophilic ethoxylated backbone, hydrophobic n-alkyl end-groups) form viscous solutions in water due to associations between the hydrophobes. The addition of alpha-, beta-, or gamma-cyclodextrin (CD) substantially reduces the solution viscosity because the CD molecules envelop and sequester the hydrophobes in their hydrophobic cavities. The present paper explores the variation in polymer-CD solution viscosity with temperature. We find that, in the case of alpha-CD alone, the solutions show "thermothickening", i.e., the viscosity increases from 25 to ca. 60 degrees C whereupon it reaches a peak value and then drops. In contrast, solutions with beta- and gamma-CD show monotonic drops in viscosity upon heating. At a fixed polymer content, the thermothickening is higher for higher alpha-CD concentrations. We have also studied how surfactants and lipids impact the thermothickening. Addition of single-tailed micelle-forming surfactants causes the viscosity to revert to the more typical decreasing trend with temperature. However, addition of double-tailed lipids to a polymer/alpha-CD solution accentuates the thermothickening behavior. The thermothickening is explained by the propensity of alpha-CDs to unbind from the hydrophobes and form inclusion complexes with the polymer backbone as the temperature is raised.

We describe a new way to impart pH-responsive properties to gels of biopolymers such as gelatin. This approach involves the embedding of pH-sensitive nanosized vesicles within the gel. The vesicles employed here are those of sodium oleate (NaOA), a fatty-acid-based amphiphile with a single C18 tail. In aqueous solution, NaOA undergoes a transition from vesicles at a pH approximately 8 to micelles at a pH higher than approximately 10. Here, we combine NaOA and gelatin at pH 8.3 to create a vesicle-loaded gel and then bring the gel in contact with a pH 10 buffer solution. As the buffer diffuses into the gel, the vesicles within the gel get transformed into micelles. Accordingly, a vesicle-micelle front moves through the gel, and this can be visually identified by the difference in turbidity between the two regions. Vesicle disruption can also be done in a spatially selective manner to create micelle-rich domains within a vesicle-loaded gel. A possible application of the above approach is in the area of pH-dependent controlled release. A vesicle-to-micelle transition releases hydrophilic solutes encapsulated within the vesicles into the bulk gel, and in turn these solutes can rapidly diffuse out of the gel into the external bath. Experiments with calcein dye confirm this concept and show that we can indeed use the pH in the bath to tune the release rate of solutes from vesicle-loaded gels.

Hydrophobically modified alkali-soluble emulsion polymers (HASE) are a class of comblike associative polymers that can impart high viscosities to aqueous solutions. The rheology of HASE solutions can be tuned by the addition of surfactants, such as nonylphenol ethoxylates (NP e), where e is the length of the hydrophilic (ethoxylate) chain. While previous studies have considered individual surfactants, our focus here is on binary surfactant mixtures. We find that equimolar NP4-NP12 mixtures significantly enhance the zero-shear viscosities of HASE solutions as compared to equivalent amounts of NP8, especially at high overall surfactant concentrations. Dynamic rheological measurements suggest that the higher viscosities are due to increases in the lifetime of hydrophobic junctions in the polymer-surfactant network. In contrast to the above results, equimolar NP4-NP8 mixtures are rheologically identical to equivalent solutions of NP6. The differences between the two sets of mixtures are further correlated with cloud point measurements and thereby with the overall hydrophilic-lipophilic balance (HLB) of the surfactant system.

Nanosized gel particles (nanogels) are of interest for a variety of applications, including drug delivery and single-molecule encapsulation. Here, we employ the cores of nanoscale liposomes as reaction vessels to template the assembly of calcium alginate nanogels. For our experiments, a liposome formulation with a high bilayer melting temperature (Tm) is selected, and sodium alginate is encapsulated in the liposomal core. The liposomes are then placed in an aqueous buffer containing calcium chloride, and the temperature is raised up to Tm. This allows permeation of Ca2+ ions through the bilayer and into the core, whereupon these ions gel the encapsulated alginate. Subsequently, the lipid bilayer covering the gelled core is removed by the addition of a detergent. The resulting alginate nanogels have a size distribution consistent with that of the template liposomes (ca. 120-200 nm), as confirmed by transmission electron microscopy and light scattering. Nanogels of different average sizes can be synthesized by varying the template dimensions, and the gel size can be further tuned after synthesis by the addition of monovalent salt to the solution.

The 22-carbon-tailed zwitterionic surfactant erucyl dimethyl amidopropyl betaine (EDAB) forms highly viscoelastic fluids in water at low concentrations and without the need for salt or other additives. Here, semidilute aqueous solutions of EDAB are studied by using a combination of rheological techniques, small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). EDAB samples show interesting rheology as a function of temperature. At low temperatures (approximately 25 degrees C), a 50 mM EDAB sample behaves like an elastic gel with an infinite relaxation time and viscosity. Upon heating to approximately 60 degrees C, however, the sample begins to respond like a viscoelastic solution; that is, the relaxation time and zero-shear viscosity become finite, and the rheology approaches that of a Maxwell fluid. The same pattern of behavior is repeated at higher EDAB concentrations. Cryo-TEM and SANS reveal the presence of giant wormlike micelles in all EDAB samples at room temperature. The results imply that, depending on temperature, EDAB wormlike micelles can exhibit either a gel-like response or the classical viscoelastic ("Maxwellian") response. The unusual gel-like behavior of EDAB micelles at low temperatures is postulated to be the result of very long micellar breaking times, which, in turn, may be due to the long hydrophobic tails of the surfactant.

We demonstrate the unique ability of catanionic vesicles, formed by mixing single-tailed cationic and anionic surfactants, to capture ionic solutes with remarkable efficiency. In an initial study (Wang, X.; Danoff, E. J.; Sinkov, N. A.; Lee, J.-H.; Raghavan, S. R.; English, D. S. Langmuir 2006, 22, 6461) with vesicles formed from cetyl trimethylammonium tosylate (CTAT) and sodium dodecylbenzenesulfonate (SDBS), we showed that CTAT-rich (cationic) vesicles could capture the anionic solute carboxyfluorescein with high efficiency (22%) and that the solute was retained by the vesicles for very long times (t1/2 = 84 days). Here we expand on these findings by investigating the interactions of both anionic and cationic solutes, including the chemotherapeutic agent doxorubicin, with both CTAT-rich and SDBS-rich vesicles. The ability of these vesicles to capture and hold dyes is extremely efficient (20%) when the excess charge of the vesicle bilayer is opposite that of the solute (i.e., for anionic solutes in CTAT-rich vesicles and for cationic solutes in SDBS-rich vesicles). This charge-dependent effect is strong enough to enable the use of vesicles to selectively capture and separate an oppositely charged solute from a mixture of solutes. Our results suggest that catanionic surfactant vesicles could be useful for a variety of separation and drug delivery applications because of their unique properties and long-term stability.

Porous volumetric capture elements in microfluidic sensors are advantageous compared to planar capture surfaces due to higher reaction site density and decreased diffusion lengths that can reduce detection limits and total assay time. However a mismatch in refractive indices between the capture matrix and fluid within the porous interstices results in scattering of incident, reflected, or emitted light, significantly reducing the signal for optical detection. Here we demonstrate that perfusion of an index-matching fluid within a porous matrix minimizes scattering, thus enhancing optical signal by enabling the entire capture element volume to be probed. Signal enhancement is demonstrated for both fluorescence and absorbance detection, using porous polymer monoliths in a silica capillary and packed beds of glass beads within thermoplastic microchannels, respectively. Fluorescence signal was improved by a factor of 3.5× when measuring emission from a fluorescent compound attached directly to the polymer monolith, and up to 2.6× for a rapid 10 min direct immunoassay. When combining index matching with a silver enhancement step, a detection limit of 0.1 ng mL(-1) human IgG and a 5 log dynamic range was achieved. The demonstrated technique provides a simple method for enhancing optical sensitivity for a wide range of assays, enabling the full benefits of porous detection elements in miniaturized analytical systems to be realized.

Vesicles formed from the cationic surfactant, cetyltrimethylammonium tosylate (CTAT) and the anionic surfactant, sodium dodecylbenzenesulfonate (SDBS), were used to sequester the anionic dye carboxyfluorescein. Carboxyfluorescein was efficiently sequestered in CTAT-rich vesicles via two mechanisms: encapsulation in the inner water pool and electrostatic adsorption to the charged bilayer. The apparent encapsulation efficiency (22%) includes both encapsulated and adsorbed fractions. Entrapment of carboxyfluorescein by SDBS-rich vesicles was not observed. Results show the permeability of the catanionic membrane is an order of magnitude lower than that of phosphatidylcholine vesicles and the loading capacity is more than 10 times greater.

Biology employs vesicles to package molecules (e.g., neurotransmitters) for their targeted delivery in response to specific spatiotemporal stimuli. Biology is also capable of employing localized stimuli to exert an additional control on vesicle trafficking; intact vesicles can be restrained (or mobilized) by association with (or release from) a cytoskeletal scaffold. We mimic these capabilities by tethering vesicles to a biopolymer scaffold that can undergo (i) stimuli-responsive network formation (for vesicle restraint) and (ii) enzyme-catalyzed network cleavage (for vesicle mobilization). Specifically, we use the aminopolysaccharide chitosan as our scaffold and graft a small number of hydrophobic moieties onto its backbone. These grafted hydrophobes can insert into the bilayer to tether vesicles to the scaffold. Under acidic conditions, the vesicles are not restrained by the hydrophobically modified chitosan (hm-chitosan) because this scaffold is soluble. Increasing the pH to neutral or basic conditions allows chitosan to form interpolymer associations that yield a strong, insoluble restraining network. Enzymatic hydrolysis of this scaffold by chitosanase cleaves the network and mobilizes intact vesicles. Potentially, this approach will provide a controllable means to store and liberate vesicle-based reagents/therapeutics for microfluidic/medical applications.

Wormlike micellar solutions based on ionic surfactants typically show an exponential decrease in viscosity upon heating. Here, we report the unusual observation of an increasing viscosity with temperature in certain cationic wormlike micellar solutions. The solutions contain a cationic surfactant with an erucyl (C22, mono-unsaturated) tail and an organic salt, sodium hydroxynaphthalene carboxylate (SHNC). When these solutions are heated, their zero-shear viscosity increases over a range of temperatures. In some cases, the viscosity reaches a peak at a certain temperature and then decreases with further heating. The magnitude of the viscosity increase, the onset of this increase, and the peak temperature can all be tuned by varying the SHNC concentration. Small-angle neutron scattering is used to study the origin of this unusual rheological behavior. The data reveal that the contour length of the micelles increases with temperature, in tandem with the rise in viscosity. A possible explanation for the contour length increase, based on a temperature-dependent counterion binding, is discussed.

The effect of adding an associating biopolymer to surfactant vesicles and micelles is studied using rheology and small-angle neutron scattering (SANS). The associating polymer is obtained by randomly tethering hydrophobic alkyl chains to the backbone of the polysaccharide, chitosan. Adding this polymer to surfactant vesicles results in a gel; that is, the sample transforms from a Newtonian liquid to an elastic solid having frequency-independent dynamic shear moduli. SANS shows that the vesicles remain intact within the gel. The results suggest a gel structure in which the vesicles are connected by polymer chains into a three-dimensional network. Vesicle-polymer binding is expected to occur via the insertion of polymer hydrophobes into the vesicle bilayer. Each vesicle thus acts as a multifunctional junction in the network structure. Significantly, gel formation does not occur with the native chitosan that has no hydrophobes. Moreover, adding the hydrophobically modified chitosan to a viscous sample containing wormlike micelles increases the viscosity further but does not give rise to a gel-like response. Thus, the formation of a robust gel network requires both the presence of hydrophobes on the polymer and vesicles in solution.

A simple and effective means for obtaining hollow silica particles of controlled diameter from about 60 to 120 nm is presented. The synthesis utilizes equilibrium vesicles as templates for the directed growth of silica. Two different surfactant systems are used to form the vesicular templates: (a) mixtures of cetyltrimethylammonium bromide (CTAB) and sodium perfluorooctanoate (FC7) and (b) mixtures of cetyltrimethylammonium tosylate (CTAT) and sodium dodecylbenzenesulfonate (SDBS). These templates were chosen because these mixtures of surfactants in water form unilamellar vesicles spontaneously that appear stable in the chemical environment required for silica synthesis. Tetramethoxysilane (TMOS) is added to the vesicular templates as a precursor for silica formation via acid-catalyzed hydrolysis and polycondensation. The morphology of the silica products as observed with transmission electron microscopy (TEM), quasi-elastic light scattering (QLS), and small-angle neutron scattering (SANS) is consistent ...

Self-assembly in mixtures of cationic and anionic surfactants occurs synergistically because of attractive interactions between the oppositely charged headgroups. Here, such effects are exploited to obtain highly viscoelastic fluids at low total surfactant concentration. The systems considered are mixtures of the C18-tailed anionic surfactant, sodium oleate (NaOA), and cationic surfactants from the trimethylammonium bromide family (CnTAB). In particular, mixtures of NaOA and C8TAB show remarkably high viscosities: for 3% surfactant, the zero-shear viscosity η0 peaks at ca. 1800 Pa·s for a weight ratio of 70/30 NaOA/C8TAB. The high viscosities reflect the growth of giant, entangled wormlike micelles in the solutions. Mixtures of NaOA with a shorter-chain analogue (C6TAB) have much lower viscosities, indicating a weak micellar growth and hence a weak attraction between the surfactants. On the other hand, increasing the CnTAB tail length to n = 10 or 12 leads to much stronger interactions between these surf...

The addition of low concentrations of the hydrotropic salt p-toluidine hydrochloride (PTHC) to solutions of the anionic surfactant sodium dodecyl sulfate (SDS) promotes the transition from spherical to rodlike micelles. NMR measurements confirm that the hydrotrope adsorbs at the micelle−water interface, thereby screening electrostatic repulsions between the surfactant headgroups. The sphere-to-rod transition in dilute solutions is followed using quasielastic light scattering, and in the semidilute concentration range dynamic rheology is used to probe the viscoelastic nature of the solutions. The scaling of the zero-shear viscosity and the plateau modulus with surfactant concentration indicates the presence of electrostatic interactions between the micelles.

Cationic surfactants with an erucyl (C22, monounsaturated) tail display unusual phase behavior in aqueous solution as a function of temperature and added salt concentration. Low amounts of salts with binding counterions such as sodium tosylate (NaTos) lead to highly viscoelastic wormlike micellar solutions. With further addition of salt, the viscosity decreases, and the solutions cloud on heating (i.e., exhibit lower consolute phase behavior). The cloud-point temperature and the zero-shear viscosity η0 pass in parallel through minima as a function of NaTos concentration. Cloud-point behavior is seen over a wider range of salt concentrations in the case of sodium salicylate (NaSal), which has an even stronger binding counterion. In the case of a weakly binding salt (NaCl), phase transitions are observed only at much higher salt contents, and the phase behavior is predominantly of the upper consolute type. Light and neutron scattering data show evidence of critical concentration fluctuations near the cloud ...

Synthetic dispersants such as Corexit 9500A were used in large quantities (∼2 million gallons) to disperse the oil spilled in the ocean during the recent Deepwater Horizon event. These dispersant formulations contain a blend of surfactants in a base of organic solvent. Some concerns have been raised regarding the aquatic toxicity and environmental impact of these formulations. In an effort to create a safer dispersant, we have examined the ability of food-grade amphiphiles to disperse (emulsify) crude oil in seawater. Our studies show that an effective emulsifier is obtained by combining two such amphiphiles: lecithin (L), a phospholipid extracted from soybeans, and Tween 80 (T), a surfactant used in many food products including ice cream. Interestingly, we find that L/T blends show a synergistic effect, i.e., their combination is an effective emulsifier, but neither L or T is effective on its own. This synergy is maximized at a 60/40 weight ratio of L/T and is attributed to the following reasons: (i) L and T pack closely at the oil-water interface; (ii) L has a low tendency to desorb, which fortifies the interfacial film; and (iii) the large headgroup of T provides steric repulsions between the oil droplets and prevents their coalescence. A comparison of L/T with Corexit 9500A shows that the former leads to smaller oil droplets that remain stable to coalescence for a much longer time. The smaller size and stability of crude oil droplets are believed to be important to their dispersion and eventual microbial degradation in the ocean. Our findings suggest that L/T blends could potentially be a viable alternative for the dispersion of oil spills.

Cationic surfactants having long (C22) mono-unsaturated tails were studied in aqueous solutions containing salt using steady and dynamic rheology. The surfactant erucyl bis(hydroxyethyl)methylammonium chloride self-assembles into giant wormlike micelles, giving rise to unusually strong viscoelasticity. Under ambient conditions, the viscosity enhancement due to surfactant exceeds a factor of 107. Some samples behave as gel-like solids at low temperatures and revert to the viscoelastic (Maxwellian) response only at higher temperatures. These samples display appreciable viscosities (>10 Pa·s) up to very high temperatures (ca. 90 °C). Salts with counterions that penetrate into the hydrophobic interior of the micelles, such as sodium salicylate, are much more efficient at promoting self-assembly than salts with nonbinding counterions, such as sodium chloride. Changing the surfactant headgroup to the more conventional trimethylammonium group reduces the viscosity at high temperatures.

Dispersions of hydrophilic fumed silica are investigated in a range of polar organic media. The silica forms stable, low-viscosity sols exhibiting shear thickening behavior in a host of liquids, including ethylene glycol and its oligomers and short-chain alcohols, such as n-propanol. In contrast, the silica flocculates into colloidal gels in other liquids, such as glycols with methyl end-caps and longer-chain alcohols. We suggest that there is a causal relationship between the hydrogen-bonding ability of the liquid and the colloidal microstructure observed. In strongly hydrogen-bonding liquids, a solvation layer is envisioned to form on the silica surface through hydrogen bonding between liquid molecules and surface silanol groups (Si−OH). This gives rise to short-range, non-DLVO repulsions (“solvation forces”) which stabilize the silica particles. In contrast, in the case of liquids with limited hydrogen-bonding ability, silanols on adjacent silica particles are envisioned to interact directly by hydroge...

Colloidal interactions between particles dispersed in a liquid can be suitably tailored by modifying the surface chemistry of the particles. In the case of fumed silica particles, the surface can be systematically altered from hydrophilic to hydrophobic by replacing a portion of the original silanol (Si−OH) groups by nonpolar alkyl chains. In this study, we probe the effect of surface modification of fumed silica on their rheology and microstructure in polar media. Variables of interest include the length of the tethered alkyl chain and the extent of surface coverage. For the continuous phase, we examine a range of polyether liquids comprising different architectures and molecular weights. We find that when the alkyl chains are C8 or longer, and are attached at saturation levels, a dense nonpolar surface layer is formed on each silica unit. Such particles experience strong interactions in polar media, leading to the formation of a volume-filling network (gel). We show that these interactions arise as a re...

Hydrophobically modified chitosan (hmC) is a self-assembling polymer that has attracted recent attention for many applications, including as a hemostatic agent. One limitation with chitosan and its derivatives like hmC is that these polymers are soluble in water only under acidic conditions (because the pKa of chitosan is about 6.5), which could be undesirable for biomedical applications. To circumvent this limitation, we have synthesized a derivative of a C12-tailed hmC that is soluble in water at neutral pH. This water-soluble hmC (ws-hmC) is obtained by grafting O-carboxymethyl groups onto some of the primary hydroxyls on hmC. The solubility of ws-hmC at neutral pH is shown to be the result of a net anionic character for the polymer due to ionization of the carboxymethyl groups (in comparison, hmC is cationic). We also demonstrate that ws-hmC retains the self-assembling properties of hmC. Specifically, ws-hmC is able to induce gelation at neutral pH in dispersions of anionic surfactant vesicles as well as polymethylmethacrylate latex nanoparticles. Gelation is attributed to hydrophobic interactions between the hydrophobes on ws-hmC with vesicle bilayers and nanoparticle surfaces. In each case, gelation can be reversed by the addition of α-cyclodextrin, a supramolecule with a hydrophobic cavity that sequesters the hydrophobes on the polymer.

We describe the microfluidic assembly of soft dimer capsules by the fusion of individual capsules with distinct properties. Microscale aqueous droplets bearing the biopolymer chitosan are generated in situ within a chip and, as they travel downsteam, pairs of droplets are made to undergo controlled cross-linking and coalescence (due to a channel expansion) to form stable dimers. These dimers are very much like Janus particles: the size, shape, and functionality of each individual lobe within the dimer can be precisely controlled. Dimers with one lobe much shorter than the other resemble a bowling pin in their overall morphology, while dimers with nearly equal-sized lobes are akin to a snowman. To illustrate the diverse functionalities possible, we have prepared dimers wherein one lobe encapsulates paramagnetic Fe2O3 nanoparticles. The resulting dimers undergo controlled rotation in an external rotating magnetic field, much like a magnetic stir bar. The overall approach described here is simple and versatile: it can be easily adapted in numerous ways to produce soft structures with designed properties.

Drag-reducing (DR) surfactant fluids based on threadlike micelles are known to suffer from poor heat-transfer capabilities. Accordingly, the use of these fluids is limited to recirculating systems in which heat exchange is not important. Here, we show for the first time that light-responsive threadlike micelles can offer a potential solution to the above problem. The fluids studied here are composed of the cationic surfactant Ethoquad O/12 PG (EO12) and the sodium salt of trans-ortho-methoxycinnamic acid (OMCA). Initially, these fluids contain numerous threadlike micelles and, in turn, are strongly viscoelastic and effective at reducing drag (up to 75% DR). Upon exposure to UV light, OMCA is photoisomerized from trans to cis. This causes the micelles to shorten considerably, as confirmed by cryo-transmission electron microscopy (cryo-TEM). Because of the absence of long micelles, the UV-irradiated fluid shows lower viscoelasticity and much lower DR properties; however, its heat-transfer properties are considerably superior to the initial fluid. Thus, our study highlights the potential of switching off the DR (and in turn enhancing heat-transfer) at the inlet of a heat exchanger in a recirculating system. While the fluids studied here are not photoreversible, an extension of the above concept would be to subsequently switch on the DR again at the exit of the heat exchanger, thus ensuring an ideal combination of DR and heat-transfer properties.

The rheology of wormlike micelles ("worms") formed by surfactants in water often follows nonmonotonic trends as functions of composition. For example, a study by Raghavan et al. (Langmuir 2002, 18, 3797) on mixtures of the anionic surfactant sodium oleate (NaOA) and the cationic surfactant octyl trimethylammonium bromide (OTAB) reported a pronounced peak in the zero-shear viscosity eta0 as a function of NaOA/OTAB ratio at a constant surfactant concentration (3 wt %). In this work, we study the origins of rheological changes in the NaOA/OTAB system and the relations between the composition and structural characteristics using cryo-transmission electron microscopy (cryo-TEM). When either surfactant is in large excess, the dominating morphology is that of spherical micelles. As oppositely charged surfactant is added to the mixture, the spheres grow into linear worms and these continue to elongate as the viscosity peak (which occurs at a 70/30 NaOA/OTAB ratio) is approached from either end. At the viscosity peak, the sample shows numerous long worms as well as a small number of branched worms. Taken together, NaOA/OTAB rheology can be primarily understood on the basis of micellar growth, which is explained primarily by packing arguments. While the size of the hydrophobic micellar core continuously decreases as the short amphiphile OTAB is added at the expense of NaOA, screening of charges goes through a maximum, which contributes to the asymmetry of the viscosity curve. With regard to micellar branching, there is no significant difference in the density of branched worms on either side of the viscosity peak. Therefore, it appears that in contrast to the behavior of some surfactant/salt systems, branching does not have a significant influence on the rheology of this mixed catanionic surfactant system. Instead, our data clearly indicate that the origin of the viscosity peak is linked with micellar growth and micellar shortening.

Gel formation by surfactant molecules is argued to be a process similar to micellization rather than crystallization; it is controlled by thermodynamics rather than kinetics. The properties of surfactant-based gels are compared with those of gels with crystalline fibrillar networks, and questions associated with the nature of these gels are raised.