Search

MicroRNAs (miRNAs) have emerged as promising biomarkers for acute myocardial infarction (AMI). There is an urgent imperative to develop analytical methodologies capable of intelligently discerning multiple circulating miRNAs. Here, we present a dual miRNA detection platform for AMI using DNA logic gates coupled with an electrochemiluminescence (ECL) response. The platform integrates DNA truncated square pyramids as capture probes on gold-deposited electrodes, enabling precise quantification of miRNA associated with AMI. The cyclic enzymatic signal amplification principle of strand displacement amplification enhances the miRNA detection sensitivity. AND and OR logic gates have been successfully constructed, enabling intelligent identification of miRNAs in AMI. Calibration curves show strong linear correlations between ECL intensity and target miRNA concentration (10 fM to 10 nM), with excellent stability in consecutive measurements. When applied to clinical serum samples, the biosensor exhibits consistent performance, underscoring its reliability for clinical diagnostics. This innovative approach not only demonstrates DNA nanotechnology's potential in biosensing but also offers a promising solution for improving AMI diagnosis and prognosis through precise miRNA biomarker detection.

In this work, SiO 2 /CNTs photonic crystal beads were constructed by doping CNTs into SiO 2 photonic crystals, which have an angle-independent responsive structural color and can be used as bipolar electrodes due to their good electrical conductivity. In addition, the bipolar electrode-electrochemiluminescence (BPE-ECL) experiments and finite element simulation prove that the low driving voltage can trigger the bipolar electrode electrochemical reactions by confinement effect. Inspired by this, it is the first to combine the SiO 2 /CNTs structural color coding scheme with low-drive voltage induced wireless BPE-ECL imaging based on the confinement effect of microchannels to achieve simultaneous immune detection of ovarian cancer biomarkers (CA125, CEA, AFP). The detection limits of successfully constructed high-throughput BPE-ECL biosensor for AFP, CEA, and CA125 are 0.72 ng/mL, 0.95 ng/mL, and 1.03 U/mL, respectively, and have good stability and specificity, which expands the application of electrochemiluminescence and lays a foundation for the development of electrochemiluminescence coding technology.

Uranium is a nuclear fuel but also a hazardous contaminant due to its radioactivity and chemical toxicity. To prevent and mitigate its potential threat, the accurate monitoring of ultratrace uranium (orders of magnitude of pg g -1 ) in practical environmental samples has become an important scientific problem. To meet this challenge, we developed an efficient electrochemiluminescence (ECL) UO 2 2+ detection device by a novel dual-enhancement mechanism. In detail, poly[(9,9-dioctylfuor-enyl-2,7-diyl)- alt -co-(1,4-benzo-{2,1,3}-thiadiazole)] polymer dots (Pdots) are modified by the UO 2 2+ DNA aptamer, and rhodamine B (RhB) is combined with dsDNA to quench the ECL signal via a resonance energy transfer (RET) process. UO 2 2+ can cut off the DNA aptamer to release RhB, which generates an ECL enhancement process, and then, UO 2 2+ continuously combines with the DNA chain, inducing another ECL enhancement by the RET process from UO 2 2+ to Pdots. This device achieves an ultralow detection limit (12 pg L -1 ) and a wide linear range (113 pg L -1 -11.3 mg L -1 ), which can successfully give accurate determination results to the ultratrace uranium in biosamples (<1 pg g -1 ) to monitor the uranium simulation of fish. This work presents an efficient strategy for ultratrace uranium determination in the environment, highlighting its significance in public health and environmental fields.

Achieving sensitive detection and accurate identification of cancer cells is vital for diagnosing and treating the disease. Here, we developed a logic signal amplification system using DNA tetrahedron-mediated three-dimensional (3D) DNA nanonetworks for sensitive electrochemiluminescence (ECL) detection and subtype identification of cancer cells. Specially designed hairpins were integrated into DNA tetrahedral nanostructures (DTNs) to perform a catalytic hairpin assembly (CHA) reaction in the presence of target microRNA, forming hyperbranched 3D nanonetworks. Benefiting from the "spatial confinement effect," the DNA tetrahedron-mediated catalytic hairpin assembly (DTCHA) reaction displayed significantly faster kinetics and greater cycle conversion efficiency than traditional CHA. The resulting 3D nanonetworks could load a large amount of Ru(phen) 3 2+ , significantly enhancing its ECL signal, and exhibit detection limits for both miR-21 and miR-141 at the femtomolar level. The biosensor based on modular logic gates facilitated the distinction and quantification of cancer cells and normal cells based on miR-21 levels, combined with miR-141 levels, to further identify different subtypes of breast cancer cells. Overall, this study provides potential applications in miRNA-related clinical diagnostics.

A label-free and fast approach for positive electrochemiluminescence (ECL) imaging of single cells by bipolar nanoelectrode array is proposed. The reduction of oxygen at a platinized gold nanoelectrode array in a closed bipolar electrochemical system is coupled with an oxidative ECL process at the anodic side. For elevating the ECL imaging contrast of single cells, a driving voltage of -2.0 V is applied to in situ generate oxygen confined beneath cells that is subsequently used for ECL imaging at 1.1 V. High oxygen concentration in the confined space resulting from steric hindrance generates prominent oxygen reduction current at the cathodic side and higher ECL intensity at the anodic side, allowing positive ECL imaging of the cells adhesion region with excellent contrast. Cell morphology and adhesion strength can be successfully imaged with high image acquisition rate. This approach opens a new avenue for label-free imaging of single cells., (© 2021 Wiley-VCH GmbH.)

With reduced background and high sensitivity, photoelectrochemistry (PEC) may be applied as an intracellular nanotool and open a new technological direction of single-cell study. Nevertheless, the present palette of single-cell tools lacks such a PEC-oriented solution. Here a dual-functional photocathodic single-cell nanotool capable of direct electroosmotic intracellular drug delivery and evaluation of oxidative stress is devised by engineering a target-specific organic molecule/NiO/Ni film at the tip of a nanopipette. Specifically, the organic molecule probe serves simultaneously as the biorecognition element and sensitizer to synergize with p-type NiO. Upon intracellular delivery at picoliter level, the oxidative stress effect will cause structural change of the organic probe, switching its optical absorption and altering the cathodic response. This work has revealed the potential of PEC single-cell nanotool and extended the boundary of current single-cell electroanalysis., (© 2021 Wiley-VCH GmbH.)

New tools for single-cell interrogation enable deeper understanding of cellular heterogeneity and associated cellular behaviors and functions. Information of RNA expression in single cell could contribute to our knowledge of the genetic regulatory circuits and molecular mechanism of disease development. Although significant progresses have been made for intracellular RNA analysis, existing methods have a trade-off between operational complexity and practical feasibility. We address this challenge by combining the ionic current rectification property of nanopipette reactor with duplex-specific nuclease-assisted hybridization chain reaction for signal amplification to realize a simple and practical intracellular nanosensor with minimal invasiveness, which enables single-cell collection and electrochemical detection of intracellular RNA with cell-context preservation. Systematic studies on differentiation of oncogenic miR-10b expression levels in non-malignant breast cells, metastatic breast cancer cells as well as non-metastatic breast cancer cells were then realized by this nanotool accompanied by assessment of different drugs effects. This work has unveiled the ability of electrochemistry to probe intracellular RNA and opened new opportunities to study the gene expression and heterogeneous complexity under physiological conditions down to single-cell level., (© 2020 Wiley-VCH GmbH.)

This work developed a sensitive electrochemiluminescence (ECL) biosensor based on a cyclometalated iridium(III) complex ((bt) 2 Irbza), which was synthesized for the first time. Annihilation, reductive-oxidative, and oxidative-reductive ECL behaviors of (bt) 2 Irbza were investigated, respectively. The oxidative-reductive ECL intensity was the strongest compared with the other two, which showed 16.7 times relative ECL efficiency compared with commercial [Ru(bpy) 3 ] 2+ under the same experimental conditions. Therefore, an ECL biosensing system with (bt) 2 Irbza as the anodic luminophore was established for miRNA detection based on a closed bipolar electrode (BPE). Combined with both steric hindrance and catalytic effects induced by hemin/G-quadruplex in the cathodic reservoir of BPE that changed the Faraday current of the cathode and thus mediated the ECL intensity of (bt) 2 Irbza in the anode of BPE, the ECL sensor stated an ultrahigh sensitivity for microRNA (miRNA-122) analysis with a detection limit of 82 aM.

Engineered nanopipette tools have recently emerged as a powerful approach for electrochemical nanosensing, which has major implications in both fundamental biological research and biomedical applications. Herein, we describe a generic method of target-triggered assembly of aptamers in a nanopipette for nanosensing, which is exemplified by sensitive and rapid electrochemical single-cell analysis of adenosine triphosphate (ATP), a ubiquitous energy source in life and important signaling molecules in many physiological processes. Specifically, a layer of thiolated aptamers is immobilized onto a Au-coated interior wall of a nanopipette tip. With backfilled pairing aptamers, the engineered nanopipette is then used for probing intracellular ATP via the ATP-dependent linkage of the split aptamers. Due to the higher surface charge density from the aptamer assembly, the nanosensor would exhibit an enhanced rectification signal. Besides, this ATP-responsive nanopipette tool possesses excellent selectivity and stability as well as high recyclability. This work provides a practical single-cell nanosensor capable of intracellular ATP analysis. More generally, integrated with other split recognition elements, the proposed mechanism could serve as a viable basis for addressing many other important biological species.

Low-toxicity gold nanoclusters-decorated Ag@SiO 2 (Au NCs-Ag@SiO 2 ) nanocomposites modified plasmonic photoelectrodes were first fabricated to improve the photoelectric properties of Au NCs and practical application in biological detection. Through adjusting distance between Au NCs and plasmonic silver nanoparticles (Ag NPs), the photocurrent intensity of Au NCs enhanced by 3.8 times attributed to strong competition between enhancement functions of hot electron transfer, local electric field, light scattering effects, and quenching functions of nonradiative energy transfer. Further comparison between experimental results and theoretical simulations were conducted to gain a deeper understanding toward the photoelectric enhancement mechanism. Moreover, Au NCs-Ag@SiO 2 nanocomposites was successfully applied to the construction of photoelectrochemical (PEC) biosensors for sensitively detecting alkaline phosphatase activity. This proposed PEC biosensor showed a wide linear range from 0.04 to 400 U·L -1 , and a low detection limit of 0.022 U·L -1 .

Here, we proposed a novel local surface plasmon resonance (LSPR) enhanced ECL strategy based on the metallic inverse opals and Ru(bpy) 3 2+ -doped silica nanoparticles (RuSi NPs). Gold inverse opals (GIOs), as a plasmonic array, could interact with the ECL of RuSi NPs and excite the electromagnetic (EM) field at the gold surface. The triggered EM field could enhance the ECL emission of RuSi NPs. We compared the electrochemical and ECL performances of RuSi NPs modified on the gold electrodes with different surface morphologies and found that the ECL emission of RuSi NPs patterned at the inner surface of GIOs exhibited the highest intensity. The finite-difference time-domain (FDTD) simulations indicated that the EM field was related to the surface morphology of the metallic nanostructure, and the highest EM field was observed at the inner surface of the GIOs. Because of the superior ECL performances, the inner surfaces of GIOs were developed for nucleic acid detection with a detection limit of 3.3 fM (S/N = 3), which shows great promise for bioanalysis.

Ratiometric electrochemiluminescence (ECL) assays have been widely applied in biosensing because of eliminated outside interferences and improved reliability in detection. In order to construct ratiometric ECL biosensors with high sensitivity and reliability, it is critical to find two signal emitters with suitable applied potentials or emission wavelengths. This review aims to discuss recent advances and trends of ratiometric ECL biosensors in terms of ECL materials and corresponding ratiometric sensing approaches. We focus on four types of ratiometric ECL biosensors based on particular ECL materials and ratiometric sensing strategies.

This paper describes a bidirectional electrochemiluminescence (ECL) biosensor for the detection of microRNA-141 (miRNA-141) with aM level detection limit and two-segment 8 orders of magnitude linear range. Hemin/G-quadruplex DNAzyme was assembled on carbon nitride nanosheets and Au nanoparticles modified electrode. The ECL of carbon nitride nanosheets could be enhanced by the right amount of H 2 O 2 (no more than 10 mM) and then inhibited by excessive H 2 O 2 when 0.1 M K 2 S 2 O 8 acted as coreactant. In the presence of excessive H 2 O 2 (20 mM), a recovery of ECL intensity was obtained due to the catalytic reduction of H 2 O 2 caused by hemin/G-quadruplex DNAzyme at lower target concentrations, and then an ECL decrease occurred mainly by biocatalytic precipitation (BCP)-induced charge transfer resistance on the electrode surface at higher target concentrations. Therefore, based on the change of the ECL intensity caused by the catalytic reduction of H 2 O 2 and BCP, a highly sensitive bidirectional miRNA sensor with ultralow detection limit of 7.9 aM and wide linear range from 10 -17 to 10 -9 M was obtained. This work could attract more attention on the study of multiple mechanisms and also provides a more sensitive and precise method for the analysis of nucleic acids.

This Letter reports a novel synthetic methodology for the fabrication of three-dimensional (3D) nanostructured CdS@carbon fiber (CF) networks and the validation of its feasibility for applications as a general platform for photoelectrochemical (PEC) bioanalysis. Specifically, 3D architectures are currently attracting increasing attention in various fields due to their intriguing properties, while CdS has been most widely utilized for PEC bioanalysis applications because of its narrow band gap, proper conduction band, and stable photocurrent generation. Using CdS as a representative material, this work realized the innovative synthesis of 3D CdS@CF networks via a simple solvothermal process. Exemplified by the sandwich immunoassay of fatty-acid-binding protein (FABP), the as-fabricated 3D CdS@CF networks exhibited superior properties, and the assay demonstrated good performance in terms of sensitivity and selectivity. This work features a novel fabrication of 3D CdS@CF networks that can serve as a general platform for PEC bioanalysis. The methodology reported here is expected to inspire new interest for the fabrication of other 3D nanostructured Cd-chalcogenide (S, Se, Te)@CF networks for wide applications in biomolecular detection and beyond.

In this study, we proposed a dual-wavelength electrochemiluminescence resonance energy transfer (ECL-RET) ratiometric sensor combined with duplex-specific nuclease (DSN)-assisted target recycling amplification to detect microRNAs (miRNAs). Due to the perfect overlapping of spectra, the gold-nanoparticle-luminol-layered-double-hydroxides (Au NP-luminol-LDH) nanocomposite and gold nanoclusters (Au NCs) exhibited excellent ECL-RET effect with high efficiency. The Au NP-luminol-LDH donor exhibits a strong and stable ECL emission at the wavelength peak of 440 nm, while the Au NC acceptor has an emission peak at 620 nm. Upon the introduction of DSN and target miRNAs, the specific DNA-RNA binding and nuclease cleaving could trigger the detachment of capture Au NCs-DNA from the surface of Au NP-luminol-LDH, resulting in an increased ECL signal of Au NP-luminol-LDH and a decreased fluorescence signal of Au NCs. By measuring the ratio of optical signals at 440 and 620 nm, the designed sensor provided a quantitative readout proportional to the target miRNAs concentration in the range of 10 aM to 100 pM with a lower detection limit (LOD) of 9.4 aM.

In this study, we have developed a programmable electrochemiluminescence (ECL) system based on multi-segmented CdS-Au nanorod arrays with a sequential and highly tunable structure. The nanorod arrays were synthesized by an electrodeposition method using anodic aluminum oxide (AAO) as the template in which the Au and CdS segments were alternately electrodeposited. Compared to pure CdS nanorod arrays, multi-segmented CdS-Au nanorod arrays have showed a better ECL performance, which can be attributed to two factors: the favorable electron transfer and the surface plasma resonance (SPR) effect of the Au segment. On the one hand, we demonstrated that the Au segment can increase the charge transfer rate of CdS, which is beneficial for the ECL process because the generation of the radical state needs to accept electrons and then generate the radical state. On the other hand, the SPR of Au plasmon-induced local electromagnetic field enhancement can increase the radiative decay rate of CdS which makes the ECL process more efficient and lead to a higher ECL intensity. And also, an ECL sensor with multi-segmented CdS-Au nanorod arrays was constructed to detect prostate protein antigen (PSA). This study provides some basis for designing high-performance ECL emission materials and the construction of biosensors.

Highly stable circulating microRNAs (miRNAs) are currently recognized as a novel potential biomarker for clinical cancer diagnosis in the early stage. However, limited by its low concentration, high sequence similarity, as well as the numerous interferences in body fluids, detection of miRNA in whole blood with sufficient selectivity and sensitivity is still challenging. Herein, we reported the integration of entropy-driven toehold-mediated DNA strand displacement (ETSD) reaction with magnetic beads (MB) toward the energy-transfer-based photoelectrochemical (PEC) detection of the prostate carcinoma (PCa) biomarker miRNA-141 in a real blood sample. In this protocol, the ETSD reaction was divided into two steps, and cooperated with magnetic separation, target extraction and amplification could be realized in a single test and ultrasensitive detection of miRNA-141 could be achieved in undiluted whole blood sample. This work proposed a new solution for sensitive biomolecular detection in a complex biological milieu and exhibited great promise for future clinical cancer diagnosis.

Organic bioelectronics have shown promising applications for various sensing purposes due to their significant advantages in term of high flexibility, portability, easy fabrication, and biocompatibility. Here, a new type of organic device, organic photo-electrochemical transistor (OPECT), is reported, which is the combination of an organic electrochemical transistor and a photo-electrochemical gate electrode modified with CdS quantum dots (QDs). Thanks to the inherent amplification function of the transistor, the OPECT-based biosensor exhibits much higher sensitivity than that of a traditional biosensor. The sensing mechanism of the OPECT is attributed to the charge transfer between the photosensitive semiconductor CdS QDs and the gate electrode. In an OPECT-based DNA sensor, target DNA is labeled with Au nanoparticles (NPs) and captured on the gate electrode, which can influence the charge transfer on the gate caused by the exciton-plasmon interactions between CdS QDs and Au NPs. Consequently, a highly sensitive and selective DNA sensor with a detection limit of around 1 × 10 -15 m is realized. It is expected that OPECTs can be developed as a high-performance platform for numerous biological detections in the future., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This paper describes an electrochemiluminescence resonance energy transfer (ECL-RET) system using Ru(bpy) 3 2+ -doped silica nanoparticles (RuSi NPs) as the ECL donor and hollow Au nanocages as the ECL acceptor. Tetrahedron DNA (TD) was used to construct the biosensing interface and control the distance (4.8 nm) between the ECL donor-acceptor pairs. The surface plasmon resonance (SPR) nanostructures, Au nanocages were assembled via the hairpin based sandwich assay. Due to the well overlap between the plasmon absorption spectrum of Au nanocages (628 nm) and the ECL emission spectrum of RuSi NPs (620 nm), high efficient energy transfer could occur. Subsequent cyclic DNA amplification further increased the binding amount of Au nanocages. Since the ECL inhibition is closely related with the binding amount of Au nanocages, a general "signal-off" ECL bioassay could thus be tailored with high sensitivity. At the optimized conditions, this ECL-RET system performed well with great stability and repeatability for nucleic acid detection in the range from 1.0 fM to 10 pM. This work manifested the great promise of hollow Au nanocages for an ECL-RET biosensor that to the best of our knowledge has not been reported. We believe that it could inspire more interest in the design and development of numerous other SPR nanostructures for advanced ECL-RET biosensors.

In this study, on the basis of hierarchical CuInS 2 -based heterostructure, a novel cathodic photoelectrochemical (PEC) enzymatic bioanalysis of the sarcosine detection was reported. Specifically, heterostructured CuInS 2 /NiO/ITO photocathode was prepared and sarcosine oxidases (SOx) were integrated for the construction of the enzymatic biosensor. In the bioanalysis, the O 2 -dependent suppression of the cathodic photocurrent can be observed due to the competition between the as-fabricated O 2 -sensitive photocathode and the SOx-catalytic event toward O 2 reduction. Based on the sarcosine-controlled O 2 concentration, a novel photocathodic enzymatic biosensor could be realized for the sensitive and specific sarcosine detection. This work manifested the great potential of CuInS 2 -based heterostructure as a novel platform for future PEC bioanalytical development and also a PEC method for sarcosine detection, which could be easily extended to numerous other enzymatic systems and to our knowledge has not been reported. This work is expected to stimulate more interest in the design and implementation of numerous CuInS 2 -based heterostructured photocathodic enzymatic sensing., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This work reports the synthesis, characterization, and application of bifunctional semiconducting CuO nanotubes (NTs) electrode for innovative synergized cathodic photoelectrochemical (PEC) enzymatic bioanalysis. Specifically, CuO NTs electrode was fabricated by surface oxidation of the copper foil in an alkaline aqueous solution with (NH 4 ) 2 S 2 O 8 and then annealed in air at 200 °C. After the subsequent coupling with the model enzyme of xanthine oxidase (XOD), the resulted photocathodic enzyme biosensor exhibited good analytical performance of rapid response, high stability, and good sensitivity. Especially, due to the unique catalytic property of CuO toward H 2 O 2 , a novel enzymatic cascade design between biological catalyst (XOD as natural enzyme) and biomimetic catalyst (CuO as the peroxidase mimetics) was constructed, and the dual-catalyst system with special synergy effect could achieve the cathodic PEC guanine bioanalysis with enhanced efficiency. In the determination, the cathodic photocurrent was found to be proportional to the guanine concentration, which was different from the commonly observed O 2 -dependent suppression of the photocurrent. In all, such a bifunctional CuO NTs-based PEC bioassay format has not been reported. The success of this work can offer great chances for further development and implementation of novel CuO-based PEC bioanalytical systems. More importantly, the strategy proposed here could contribute to the development of an original prototype for general PEC enzymatic bioanalysis.

In this work, we developed a visual ECL ratiometry on a closed bipolar electrode (BPE) for the detection of prostate specific antigen (PSA), prostate cancer biomarker. High efficient CdTe QDs was synthesized which emitted visualized red light at BPE cathode. Integrating with the anodic ECL emitters, luminol, visual emission of red-blue ratiometric ECL was achieved in BPE array chips. As a sensing probe, Au NRs nanocomposite was assembled on the surface of the cathode and acted as both the quencher of the CdTe QDs ECL and the promoter of the luminol ECL. After incubated with PSA, the Au NRs nanocomposite was peeled off from the electrode surface due to the specific recognition between PSA and aptamer. Consequently, the cathode ECL partly recovered and the anode ECL turned off. By measuring the ratio of visual ECL intensity at two poles of BPE, sensitive detection of PSA was achieved with a linear range from 1.0ng/mL to 1.0μg/mL and detection limit of 0.5ng/mL (S/N=3). This strategy combining the BPE-ECL and visual ratiometry provided an accurate and intrinsic way for the sensing of PSA and showed good perspective in the clinical diagnosis., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this study, semiconducting organic polymer dots (Pdots) and inorganic quantum dots (Qdots) were first utilized to construct the organic-inorganic nanodots heterojunction for the photoelectrochemical (PEC) bioanalysis application. Specifically, n-type CdS Qdots, p-type CdTe Qdots, and tetraphenylporphyrin (TPP)-doped poly[(9,9-dioctylfluorenyl-2,7-diyl)- co-(1,4-benzo-{2,1',3}-thiadazole)] (PFBT) Pdots were fabricated, and their energy levels, that is, their valence band (VB)/conduction band (CB) or lowest unoccupied molecular orbital (LUMO)/highest occupied molecular orbital (HOMO) values, were also determined. Then, these nanodots were integrated to construct four types of p-n and p-p organic-inorganic nanodots heterojunctions, that is, CdS Qdots/TPP-doped PFBT Pdots, TPP-doped PFBT Pdots/CdS Qdots, CdTe Qdots/TPP-doped PFBT Pdots, and TPP-doped PFBT Pdots/CdTe Qdots, on the transparent glass electrode. Upon light irradiation, four heterojunctions exhibited different PEC behaviors with some having prominent photocurrent enhancement. With the model molecule l-cysteine (l-cys) as target, the proposed PEC sensor exhibited good performances. In brief, this work presents the first semiconducting organic-inorganic nanodots heterojunction for PEC bioanalysis application, which could be easily used as a general platform for future PEC bioanalysis building. Besides, it is expected to inspire more interest in the design, development, and implementation of various organic-inorganic heterojunctions for advanced PEC bioanalysis in the future.

Herein we report the strategy of liposome-mediated Cu 2+ -induced exciton trapping upon CdS quantum dots (QDs) for amplified photoelectrochemical (PEC) bioanalysis application. Specifically, the Cu nanoclusters (NCs)-encapsulated liposomes were first fabricated and then processed with antibodies bound to their external surfaces. After the sandwich immunocomplexing, the confined liposomal labels were subjected to sequential lysis treatments for the release of Cu NCs and numerous Cu 2+ ions, which were then directed to interact with the CdS QDs electrode. The interaction of Cu 2+ ions with CdS QDs could generate Cu x S and form the trapping sites to block the photocurrent generation. Since the photocurrent inhibition is closely related with the Cu NCs-loaded liposomal labels, a novel and general "signal-off" PEC immunoassay could thus be tailored with high sensitivity. Meanwhile, a complementary "signal-on" fluorescent detection could be accomplished by measuring the fluorescence intensity originated from the Cu NCs. This work features the first use of Cu NCs in PEC bioanalysis and also the first NCs-loaded liposomal PEC bioanalysis. More importantly, by using other specific ions/reagents-semiconductors interactions, this protocol could serve as a common basis for the general development of a new class of liposome-mediated PEC bioanalysis.

Nanochannels have brought new opportunities for biosensor development. Herein, we present the novel concept of a nanochannels photoelectrochemical (PEC) biosensor based on the integration of a unique Cu x O-nanopyramid-islands (NPIs) photocathode, an anodic aluminum oxide (AAO) membrane, and alkaline phosphatase (ALP) catalytic chemistry. The Cu x O-NPIs photocathode possesses good performance, and further assembly with AAO yields a designed architecture composed of vertically aligned, highly ordered nanoarrays on top of the Cu x O-NPIs film. After biocatalytic precipitation (BCP) was stimulated within the channels, the biosensor was used for the successful detection of ALP activity. This study has not only provided a novel paradigm for an unconventional nanochannels PEC biosensor, which can be used for general bioanalytical purposes, but also indicated that the new concept of nanochannel-semiconductor heterostructures is a step toward innovative biomedical applications.

Photoelectrochemical (PEC) bioanalysis is a newly developed methodology that provides an exquisite route for innovative biomolecular detection. Quantum dots (QDs) are semiconductor nanocrystals with unique photophysical properties that have attracted tremendous attentions among the analytical community. QDs-based PEC bioanalysis comprises an important research hotspot in the field of PEC bioanalysis due to its combined advantages and potentials. Currently, it has ignited increasing interests as demonstrated by increased research papers. This review aims to cover the most recent advances in this field. With the discussion of recent examples of QDs-PEC bioanalysis from the literatures, special emphasis will be placed on work reporting on fundamental advances in the signaling strategies of QDs-based PEC bioanalysis from 2013 to now. Future prospects in this field are also discussed., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This work reports the first preparation and characterization of a hybrid PbS quantum dot (QD)/nanoporous NiO film nanostructure as well as its application for novel self-powered cathodic photoelectrochemical (PEC) sensing. Specifically, we synthesized the thioglycolic acid-capped PbS QDs and then assembled them onto the hydrothermally fabricated three-dimensional (3D) NiO nanostructured films on the transparent indium tin oxide-coated glass substrates, followed by the subsequent conjugation with the glucose oxidase as a model biocatalyst. Favorable alignment existed between the NiO and PbS QDs, and the as-obtained p-type heterostructure was characterized by various techniques and found to have good PEC activities. In the self-powered PEC biosensing of glucose, the system exhibited high sensitivity toward the presence of dissolved oxygen in the electrolyte, and thereby, a novel PEC enzymatic sensor was developed. With a PbS QD/3D NiO nanofilm, this work manifested the great promise of a heterostructure photocathode for a self-powered PEC biosensor that to the best of our knowledge has not been reported. We believe that it could inspire more interest in the design and development of numerous other p-type heterostructures for advanced self-powered PEC biosensors.

We have developed sensitive photoelectrochemical (PEC) detection of cysteine using the gold nanoparticles (Au NPs) equipped perovskite Bi 4 NbO 8 Cl heterostructure. The Bi 4 NbO 8 Cl was prepared by a solid-state reaction, and the Au NPs/Bi 4 NbO 8 Cl electrode was made through the electrostatic layer-by-layer self-assembly technique. The Au NPs/Bi 4 NbO 8 Cl electrode provided much enhanced photocurrent with a great increase compared to the bare Bi 4 NbO 8 Cl electrode and allowed for the plasmon-enhanced PEC detection of cysteine with good performance. It demonstrated rapid response, high stability, wide linear detection range and certain selectivity, implying its great promise in its application. Therefore, the Au NPs/Bi 4 NbO 8 Cl heterostructure has provided a promising platform for the development of PEC bioanalysis. More generally, these findings offered an insight into the exploitation of perovskite materials for PEC bioanalytical purposes.

Sensitive photoelectrochemical (PEC) bioanalysis usually relies on enzyme-assisted signal amplification. This work describes the first proof-of-concept study for liposome-based PEC bioanalysis. Specifically, unilamellar liposomes were prepared and then utilized to carry the enediol-ligands and antibodies within their internal cavities and upon their external surfaces, respectively. On the other hand, the 96-well plate was used for accommodating the sandwich immunocomplexing, and then the confined liposomes were directed to release the encapsulated enediol-ligands into an individual well. The subsequent in situ sensitization of the TiO 2 nanoparticles (NPs) electrode was then used to transduce the recognition events. This facile strategy allows for sensitive immunoassay without the involvement of laborious electrode fabrication and enzymatic amplification. Importantly, the protocol can be extended as a general PEC method for numerous other targets of interest. We believe this work could offer a new perspective for the rational implementation of various liposome complexes for novel PEC bioanalysis.

Enzymatic biosensors have been valuable bioanalytical devices for analysis of diverse targets in disease diagnosis, biological and biomedical research, etc. Photoelectrochemical (PEC) bioanalysis is a recently emerged method that promptly becoming a subject of new research interests due to its attractive potential for future bioanalysis with high sensitivity and specificity. PEC enzymatic biosensors integrate the inherent sensitivities of PEC bioanalysis and the selectivity of enzymes and thus share their both advantages. Currently, PEC enzymatic biosensors have become a hot topic of significant research and the recent impetus has grown rapidly as demonstrated by increased research papers. Given the pace of advances in this area, this review will make a thorough discussion and survey on the fundamentals, sensing strategies, applications and the state of the art in PEC enzymatic biosensors, followed by future prospects based on our own opinions. We hope this work could provide an accessible introduction to PEC enzymatic biosensors for any scientist., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This work reports the use of compositionally heterogeneous asymmetric Ag@Au core-satellite nanoassembly functionalized with DNA sequence as unique signaling nanoprobes for the realization of new energy-transfer-based photoelectrochemical (PEC) immunoassay of prostate- specific antigen (PSA). Specifically, the Ag@Au asymmetric core-satellite nanoassemblies (Ag@Au ACS) were fabricated on a two-dimensional glass substrate by a modified controlled assembly technique, and then functionalized with DNA sequences containing PSA aptamers as signaling nanoprobes. Then, the sandwich complexing between the PSA, its antibodies, and the signaling nanoprobes was performed on a CdS QDs modified indium tin oxide (ITO) electrode. The single stranded DNA can server as a facile mediator that place the Ag@Au ACS in proximity of CdS QDs, stimulating the interparticle exciton-plasmon interactions between Ag@Au ACS and CdS QDs and thus quenching the excitonic states in the latter. Since the damping effect is closely related to the target concentration, a novel energy-transfer-based PEC bioanalysis could be achieved for the sensitive and specific PSA assay. The developed biosensor displayed a linear range from 1.0×10 -11 gmL -1 to 1.0×10 -7 gmL -1 and the detection limit was experimentally found to be of 0.3×10 -13 gmL -1 . This strategy used the Ag@Au ACS-DNA signaling nanoprobes and overcame the deficiency of short operating distance of the energy transfer process for feasible PEC immunoassay. More significantly, it provided a way to couple the plasmonic properties of the Ag NPs and Au NPs in a single PEC bioanalytical system. We expected this work could inspire more interests and further investigations on the advanced engineering of the core-satellite or other judiciously designed nanostructures for new PEC bioanalytical uses with novel properties., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Different from the most extensively used inorganic quantum dots (Qdots) for the current state-of-the-art photoelectrochemical (PEC) bioanalysis, this work reports the first demonstration of polymer dots (Pdots) for novel PEC bioanalysis. The semiconducting Pdots were prepared via the reprecipitation method and then immobilized onto the transparent indium tin oxide glass electrode for PEC biodetection of the model molecule l-cysteine. The experimental results revealed that the as-fabricated Pdots exhibited excellent and interesting PEC activity and good analytical performance of rapid response, high stability, wide linear range, and excellent selectivity. In particular, the PEC sensor could easily discriminate l-cysteine from reduced l-glutathione (l-GSH). This work manifested the great promise of Pdots in the field of PEC bioanalysis, and it is believed that our work could inspire the development of numerous functional Pdots with unique properties for innovative PEC bioanalytical purposes in the future.

Herein the influence of ultrasmall Ag nanoclusters (Ag NCs) against CdS quantum dots (QDs) in a photoelectrochemical (PEC) nanosystem was exploited for the first time, based on which a novel PEC bioanalysis was successfully developed via the efficient quenching effect of Ag NCs against the CdS QDs. In a model system, DNA assay was achieved by using molecular beacon (MB) probes anchored on a CdS QDs modified electrode, and the MB probes contain two segments that can hybridize with both target DNA sequence and the label of DNA encapsulated Ag NCs. After the MB probe was unfolded by the target DNA sequence, the labels of oligonucleotide encapsulated Ag NCs would be brought in close proximity to the CdS QDs electrode surface, and efficient photocurrent quenching of QDs could be resulted from an energy transfer process that originated from NCs. Thus, by monitoring the attenuation in the photocurrent signal, an elegant and sensitive PEC DNA bioanalysis could be accomplished. The developed biosensor displayed a linear range from 1.0pM to 10nM and the detection limit was experimentally found to be of 0.3pM. This work presents a feasible signaling principle that could act as a common basis for general PEC bioanalysis development., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Herein, on the basis of the alkaline phosphate (ALP) induced reaction, a simultaneous photoelectrochemical (PEC) and visualized immunoassay has been established for the detection of β-human chorionic gonadotrophin (β-HCG). Specifically, in the proposed system, ALP stimulated the oxidative hydrolyzing transformation of 5-bromo-4-chloro-3-indoyl phosphate (BCIP) to an indigo precipitation, generating an insulating layer that impeded the interfacial mass and electron transfer and thus the photocurrent production. Meanwhile, a visualized detection could be performed according to the change of color intensity. Upon proper experimental conditions, the protocol possessed a detection range of 0.5-1000IU/L with a detection limit of (0.20±0.011)IU/L toward β-HCG. With high sensitivity and specificity, this work presents the first general protocol for simultaneous PEC and visualized detection, which could be easily extended to addressing numerous other targets., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Photoelectrochemical (PEC) bioanalysis is a newly developed technique for innovative biomolecular detection. Quantum dots (QDs) with unique photophysical properties are key components in realization of various exquisite PEC bioanalyses. Particularly, significant progress has been made in the QD-based PEC bioanalysis. In this work, we briefly summarize the most recent and important developments in the use of traditional and newly emerging QDs for novel PEC bioanalytical applications. The future prospects in this dynamic field are also highlighted.

We report a bipolar electrode (BPE) sensing platform for the temporal detection of cancer cells. Combining the advantages of anodic dissolution and electrochemiluminescence (ECL), this strategy shows an ultralow detection limit down to 5 cells/cm(2). At the anode working as the reporting pole, Au NPs were assembled through DNA double strand, which served as both catalyzer for the ECL reaction of luminol/H2O2 and seeds for the chemical reduction of Ag, the anodic dissolution probe. The duration of Ag layer dissolution was positively correlated with the amount of Ag but negatively related to the controlled potential and the conductivity of the circuit. Therefore, it was possible to amplify a slight conductivity change through tuning the other two factors. As the formation of Ag@Au completely quenched the ECL emission of luminol, the ECL emission recovery reflected the extent of anodic dissolution. Through monitoring the ECL recovery time before and after the incubation of cells on the cathode, a few number of cells could be quantified due to slight difference of the conductivity. This method shows several merits. First, the combination of anodic dissolution and ECL significantly increases the detection sensitivity of BPE device. In addition, this strategy broadens the application of BPE for the ultrasensitive monitoring of cancer cells, which was applied to investigate the capture efficiencies of antibodies and aptamers toward MCF-7 and A549.

In this work, we present a novel energy-transfer (ET)-based photoelectrochemical (PEC) probing of DNA-protein interactions, which associates intimately with many important intracellular processes in transcriptional regulatory networks. Specifically, Au nanoparticles (NPs) were confined onto the CdS quantum dots (QDs) functionalized PEC surface by the formation of duplex DNA, the subsequent binding of the TATA binding protein (TBP) and the resulting distortion of the Au NPs capped DNA sequence could adjust the interparticle distance and thereby modulate the PEC performance of CdS QDs through the ET process between the CdS QDs and Au NPs. Using the duplex DNA sequence as a rigid spacer, the relationship between the photocurrent quenching effect and the spacing distance was also studied and some experimental conditions were optimized, on the basis of which a novel ET-based PEC TBP biosensor was realized with high sensitivity and selectivity.

In this Letter, on the basis of the CdS quantum dots functionalized TiO2 nanotubes electrode, we proposed a simultaneous photoelectrochemical (PEC) immunoassay of dual cardiac markers using specific enzyme tags of alkaline phosphatase (ALP) and acetylcholine esterase (AChE). ALP and AChE were integrated into the PEC system through the sandwich immunobinding and could specifically catalyze the hydrolysis of ascorbic acid 2-phosphate (AAP) or the acetylthiocholine (ATC) to in situ generate ascorbic acid (AA) or thiocholine (TC) for sacrificial electron donating. These two enzymes were thus used to differentiate the signals of two cardiac targets in connection with the sandwich immunorecognition and PEC responses to the corresponding electron donors. This strategy demonstrates a proof of principle for the successful integration of dual enzyme tags with PEC immunoassay that can potentially provide a general format for multiplexed PEC bioanalysis.

Here, a dual-wavelength ratiometric electrochemiluminescence (ECL) approach is reported based on resonance energy transfer (RET) from graphite-like carbon nitride nanosheet (g-C3N4 NS) to Ru(bpy)3(2+) for sensitive detection of microRNA (miRNA). In this approach, Au nanoparticles (Au NPs) functionalized g-C3N4 NS nanohybrid (Au-g-C3N4 NH) coated on glassy carbon electrode (GCE) could exhibit strong and stable ECL emissions with emission peak centered at 460 nm. The ECL emission at such wavelength matched well with the absorption peak of Ru(bpy)3(2+) as well as impeccably stimulating the emission of Ru(bpy)3(2+) at the wavelength of 620 nm, producing ECL-RET with high efficiency. Thus, based on the ECL signals quenching at 460 nm and increasing at 620 nm, a dual-wavelength ratiometric ECL-RET system was achieved. This system was then utilized for determination of target miRNA. With the attachment of thiol-modified molecular beacon on Au-g-C3N4 NH, target miRNA hybridized with the molecular beacon to form a DNA-RNA duplex. The obtained DNA-RNA duplex could be cleaved by duplex-specific nuclease to release target miRNA which would take part in the next cycle for further hybridization. Finally, the introducing of Ru(bpy)3(2+) was through the probe DNA-Ru(bpy)3(2+) complementary with the rest single-strand DNA on electrode. By measuring the ratio of ECL(460 nm)/ECL(620 nm), we could accurately quantify the concentration of miRNA-21 in a wide range from 1.0 fM to 1.0 nM. This work provides an important reference for the study of dual-wavelength ECL ratiometry and also exhibits potential capability in the detection of nucleic acids.

In this work, oligonucleotide-encapusulated silver nanoclusters were applied in the electrochemiluminescence (ECL) system of CdS nanocrystals (NCs)/ K2S2O8 based on dual ECL quenching effects. We found that the ECL emission of CdS NCs matched well with the absorption band of oligonucleotide encapsulated Ag nanoclusters, which could act as the energy acceptor of CdS NCs ECL so as to lead to an effective ECL resonance energy transfer (RET). On the other hand, the Ag nanoclusters could also catalyze electrochemical reduction of K2S2O8, resulting in increased consumption of ECL coreactant near the working electrode and decreased ECL intensity from CdS NCs. On the basis of the dual ECL quenching effects, a sensitive ECL biosensor for detection of microRNA was successfully achieved with a wide linear range from 10 fM to 100 pM.

In this Feature, electrochemiluminescent (ECL) and photoelectrochemical (PEC) properties and mechanisms of semiconductor quantum dots (QDs) are reviewed, with emphasis on their specific fundamentals and concise comparison on their similarities and differences. With recent illustrative examples of bioanalytical applications, the main signaling strategies for QDs-based ECL and PEC bioanalysis are then highlighted. The future prospects in this field are also discussed.

Here we have developed a sensitive cancer cell amplified detection method which combined Au NPs enhanced electrochemiluminescence (ECL) of CdS nanocrystals (NCs) film, with isothermal circular amplification reaction of polymerase. In DNA circular amplification detection system, hairpin DNA beacon/Au NPs composite modified CdS NCs film was used as an ECL emitter. Messenger DNA is hybridized with the aptamer modified on magnetic beads (MBs) to form MB-Au bioconjugates. In the presence of HL-60 cell, the aptamer would conjugate with the glycoprotein at cell surface and messenger DNA sequence would be released. The released messenger DNA sequence was then introduced into the cycle amplification system to trigger circular polymerizations. This assay allows us to determine the released messenger DNA equivalent to 10 cells and exhibits a significant specificity for HL-60 cells., (Copyright © 2015 Elsevier B.V. All rights reserved.)

We present a novel photoelectrochemical (PEC) biosensing platform by taking advantage of the phenomenon that hemin intercalated in G-quadruplex "switched-on" the cathode photocurrent of p-type PbS quantum dots (QDs). Photoinduced electron transfer between PbS QDs and G-quadruplex/hemin(III) complexes with the subsequent catalytic oxygen reduction by the reduced G-quadruplex/hemin(II) led to an obvious enhancement in the cathodic photocurrent of the PbS QDs. For the detection process, in the presence of hemin, the specific recognition of the targets with the sensing sequence would trigger the formation of a stable G-quadruplex/hemin complex, which will result in reduced charge recombination and hence amplified photocurrent intensity of the PbS QDs. By using different target sequences, the developed system made possible a novel, label-free "switch-on" PEC aptasensor toward versatile biomolecular targets such as DNA and thrombin. Especially, with ambient oxygen to regenerate G-quadruplex/hemin(II) to G-quadruplex/hemin(III), this substrate-free strategy not only promoted the photoelectric effect and thus the enhanced sensitivity of the system, but also avoided the addition of supplementary substrates of G-quadruplex/hemin such as H2O2 and organic substances.

The evolution of photoelectrochemical (PEC) bioanalysis has resulted in substantial progress in its analytical performance and biodetection applications. The aim of this review is to provide a panoramic snapshot of the state of the art in this dynamically developing field, with special emphasis on PEC DNA analysis, immunoassay, enzymatic biosensing and cell-related detection. The future prospects in this area are also evaluated and discussed. This work will serve as a useful source to inform the interested audience of the latest developments and applications in the field of PEC bioanalysis.

In this work, we report a simple and novel electrochemical multiplexed immunosensor on a flexible polydimethylsiloxane (PDMS) slice deposited with 8 × 8 nano-Au film electrodes for simultaneous detection of prostate specific antigen (PSA), prostate specific membrane antigen (PSMA), and interleukin-6 (IL-6). Primary antibodies linked with magnetic beads (Ab1-MBs) were modified on the nano-Au film electrodes via magnetic force. In the presence of corresponding antigen, horse radish peroxidase-secondary antibody-conjugated gold nanorods (HRP-Ab2-gold NRs) were brought into the surface of electrodes, generating obvious electrochemical signals of H2O2 reduction reactions. Based on this, the designed immunosensor provide good performance in sensitivity and specificity during the detection of above three biomarkers for prostate cancer. The electrochemical multiplexed immunosensor was verified for selective and accurate detection of complex samples in human serum. Data suggested that the reported multiplexed immunosensing strategy holds great promise for applications in clinical assay and diseases diagnosis.

This work demonstrates an aptasensor for ultrasensitive electrochemiluminescence (ECL) detection of thrombin based on an "off-on-off" approach. The system is composed of an Eu(3+)-doped CdS nanocrystals (CdS:Eu NCs) film on glassy carbon electrode (GCE) as ECL emitter. Then gold nanoparticles (AuNPs) labeled hairpin-DNA probe (ssDNA1) containing thrombin-binding aptamer (TBA) sequence was linked on the NCs film, which led to ECL quenching (off) as a result of Förster-resonance energy transfer (FRET) between the CdS:Eu NC film and the proximal AuNPs. Upon the occurrence of hybridization with its complementary DNA (ssDNA2), an ECL enhancement (on) occurred owing to the interactions of the excited CdS:Eu NCs with ECL-induced surface plasmon resonance (SPR) in AuNPs at large separation. Thrombin could induce ssDNA1 forming a G-quadruplex and cause the AuNPs to be close to CdS:Eu NCs film again, which resulted in an enhanced ECL quenching (off). This "off-on-off" system showed a maximum 7.4-fold change of ECL intensity due to the configuration transformation of ssDNA1 and provides great sensitivity for detection of thrombin in a wide detection range from 50 aM to 1 pM., (Copyright © 2014 Elsevier B.V. All rights reserved.)