Search

In this paper, the behavior of the Bi-Material Cantilever (B-MaC) response deflection upon fluidic loading was experimentally studied and modeled for bilayer strips. A B-MaC consists of a strip of paper adhered to a strip of tape. When fluid is introduced, the paper expands while the tape does not, which causes the structure to bend due to strain mismatch, similar to the thermal loading of bi-metal thermostats. The main novelty of the paper-based bilayer cantilevers is the mechanical properties of two different types of material layers, a top layer of sensing paper and a bottom layer of actuating tape, to create a structure that can respond to moisture changes. When the sensing layer absorbs moisture, it causes the bilayer cantilever to bend or curl due to the differential swelling between the two layers. The portion of the paper strip that gets wet forms an arc, and as the fluid advances and fully wets the B-MaC, the entire B-MaC assumes the shape of the initial arc. This study showed that paper with higher hygroscopic expansion forms an arc with a smaller radius of curvature, whereas thicker tape with a higher Young’s modulus forms an arc with a larger radius of curvature. The results showed that the theoretical modeling could accurately predict the behavior of the bilayer strips. The significance of paper-based bilayer cantilevers lies in their potential applications in various fields, such as biomedicine, and environmental monitoring. In summary, the novelty and significance of paper-based bilayer cantilevers lie in their unique combination of sensing and actuating capabilities using a low-cost and environmentally friendly material.

The increase in anthropogenic pollution raises serious concerns regarding contamination of water bodies and aquatic species with potential implications on human health. Pharmaceutical compounds are a type of contaminants of emerging concern that are increasingly consumed and, thus, being frequently found in the aquatic environment. In this sense, an electrochemical sensor based on an unmodified and untreated carbon fiber paper (CPS—carbon paper sensor) was simply employed for the analysis of trimethoprim antibiotic in fish samples. First, the analytical conditions were thoroughly optimized in order for the CPS to achieve maximum performance in trimethoprim determination. Therefore, an electrolyte (0.1 M Britton–Robinson buffer) pH of 7 was selected and for square wave voltammetry parameters, optimum values of amplitude, frequency and step potential corresponded to 0.02 V, 50 Hz, and 0.015 V, respectively, whereas the deposition of analyte occurred at +0.7 V for 60 s. In these optimum conditions, the obtained liner range (0.05 to 2 µM), sensitivity (48.8 µA µM−1 cm−2), and LOD (0.065 µM) competes favorably with the commonly used GCE-based sensors or BDD electrodes that employ nanostructuration or are more expensive. The CPS was then applied for trimethoprim determination in fish samples after employing a solid phase extraction procedure based on QuEChERS salts, resulting in recoveries of 105.9 ± 1.8% by the standard addition method.

Low-cost diagnostic tools for point-of-care immunoassays, such as the paper-based enzyme-linked immunoassay (ELISA), have become increasingly important, especially so in the recent COVID-19 pandemic. ELISA is the gold-standard antibody/antigen sensing method. This paper reports an easy-to-fabricate nitrocellulose (NC) paper plate, coupled with a desktop scanner for ELISA, which provides a higher protein immobilization efficiency than the conventional cellulose paper-based ELISA platforms. The experiments were performed using spiked samples for the direct ELISA of rabbit IgG with a limit of detection (LOD) of 1.016 μg/mL, in a measurement range of 10 ng/mL to 1 mg/mL, and for the sandwich ELISA of sperm protein (SP-10) with an LOD of 88.8 ng/mL, in a measurement range of 1 ng/mL to 100 μg/mL. The described fabrication method, based on laser-cutting, is a highly flexible one-step laser micromachining process, which enables the rapid production of low-cost NC paper-based multi-well plates with different sizes for the ELISA measurements.

Selective detection and quantification of biomarkers related to human diseases are essential for preventive healthcare. Surface-enhanced Raman scattering (SERS) spectroscopy is a powerful analytical tool offering high sensitivity. However, the success of this promising analytical tool relies on the ability to effectively fabricate SERS substrate. Herein we have demonstrated a plasmonic paper-based flexible substrate (PPFS) for SERS sensing. In situ growth of silver nanostructures (AgNS) on the paper-based substrate was achieved by using a simple one-step silver mirror reaction (SMR). FESEM and TEM results depicts that the increasing silver ion content influences the morphology (growth of multifacets), as well as size of AgNS. Further, the PPFS substrate was tested with Rhodamine-6G (Rh-6G) dye and an attomole sensitivity with a LOD of 4.54 x 10-18 M was achieved. Further, two biomarkers, lactic acid (LA) and uric acid (UA) were detected on the PPFS substrate, with μM and pM sensitivity, having LOD values of 0.6 x 10-6 and 0.3 x 10-12 M respectively. Above detection levels for UA on PPFS is two orders better than reported values, whereas for LA it is comparable with reported substrates. Finally, UA, LA and their mixtures were tested on PPFS and results compared with commercial substrate. The performance of PPFS were found better in all cases, thus, multifaceted AgNS paper based PPFS offers the potential to be used as a biosensor for detection of various biomarkers from body fluids, responsible for the detection of the critical disease for preventive health care.

A novel, rapid, and facile method for the colorimetric determination of calcium using micro-analytical paper-based devices (μ-PADs) was developed. The proposed analytical method utilizes the color differences developing, after the addition of calcium, on the surface of the devices because of the complexation reaction of calcium with Methylthymol Blue (MTB) at room temperature, in alkaline pH. The devices were manufactured with chromatographic paper, using wax barriers, and the analytical protocol was easily implemented without the need of any experimental apparatus except for a simple imaging device. The user must regulate the pH, add the solutions on the paper, and measure the color intensity of the formed Ca(II)–MTB complex with a flatbed scanner. The experimental conditions for optimum color development, the possible interfering substances, and the reliability of the paper devices in different preserving conditions were optimized, with satisfactory results. The method exhibited acceptable detection limits (2.9 mg L−1) with sufficiently good precision, which varied from 4.2% (intra-day) to 6.4% (inter-day). Saliva samples from healthy volunteers were successfully analyzed, and the calcium levels were calculated in the range of 30.71 to 84.15 mg L−1.

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment.

The total/partial oil change treatment can affect the furfural partitioning in oil-paper-pressboard insulation, resulting in poor accuracy of furfural analysis. Moreover, due to the high cost of total oil change, partial oil change is more practical during transformer operation. This paper investigates the furfural partitioning in the oil-paper-pressboard insulation under partial oil change conditions. First, the initial furfural partitioning equation with non-oil change is proposed based on the obtained furfural content in oil, paper, and pressboard. Then, the modified furfural partitioning model under partial oil change condition is established by introducing a correction factor. Moreover, a preliminary correction scheme for the furfural partitioning model considering the influence of moisture and acid is provided. Finally, furfural content in oil-Kraft paper and oil-thermally upgraded Kraft (TUK) paper insulation are discussed, and results indicate that the proposed modified furfural partitioning model is not suitable for the oil-TUK paper insulation. This work can provide theoretical support for furfural analysis of oil-immersed transformers.

The treatment and disposal of sewage sludge is one of the most important and critical issues of wastewater treatment plants. One option for sludge liquidation is the production of fuel in the form of pellets from mixed sewage and paper mill sludge. This study presents the results of the combustion of pelletized fuels, namely sewage and paper mill sludge, and their 2:1 and 4:1 blends in a fluidized bed combustor. The flue gas was analysed after reaching a steady state at bed temperatures of 700-800 degrees C. Commonly used flue gas cleaning is still necessary, especially for SO2; therefore, it is worth mentioning that the addition of paper mill sludge reduced the mercury concentration in the flue gas to limits acceptable in most EU countries. The analysis of ash after combustion showed that magnesium, potassium, calcium, chromium, copper, zinc, arsenic, and lead remained mostly in the ash after combustion, while all cadmium from all fuels used was transferred into the flue gas together with a substantial part of chlorine and mercury. The pellets containing both sewage and paper mill sludge can be used as an environmentally friendly alternative fuel for fluidised bed combustion. The levelized cost of this alternative fuel is at the same current price level as lignite. Web of Science 15 23 art. no. 8964

The hot pressing parameters and fiber ratio have an important influence on the dielectric properties of aramid insulating paper. In order to deeply explore its influence and the mechanism behind it, aramid insulating papers were made with different hot pressing temperatures and pressures as well as fiber ratios. Its tightness, dielectric constant, and AC breakdown strength were tested, and its microstructure was analyzed by scanning electron microscopy. It was found that with an increase in hot pressing temperature, pressure, and fibrid content, the overall dielectric constant of the insulating paper showed a slight upward trend, while the tightness and AC breakdown strength continued to increase. Hot pressing temperature and pressure have a synergistic effect on the dielectric properties of insulating paper. The effects of these two parameters on the dielectric properties of insulating paper are similar, while the AC breakdown strength is greatly affected by the fiber ratio. In this paper, the influence mechanism by which the microstructure and fiber crystallinity of insulating paper is affected in the hot pressing process is discussed.

The distinct properties and affordances of paper provide benefits that enabled paper to maintain an important role in the digital age. This is so much so, that some pen–paper interaction has been imitated in the digital world with touchscreens and stylus pens. Because digital medium also provides several advantages not available to physical paper, there is a clear benefit to merge the two mediums. Despite the plethora of concepts, prototypes and systems to digitise handwritten information on paper, these systems require specially prepared paper, complex setups and software, which can be used solely in combination with paper, and, most importantly, do not support the concurrent precise interaction with both mediums (paper and touchscreen) using one pen only. In this paper, we present the design, fabrication and evaluation of theHybrid Stylus.TheHybrid Stylusis assembled with the infinity pencil tip (nib) made of graphite and a specially designed shielded tip holder that is attached to an active stylus. The stylus can be used for writing on a physical paper, while it still maintains all the features needed for tablet interaction. Moreover, the stylus also allows simultaneous digitisation of handwritten information on the paper when the paper is placed on the tablet screen. In order to evaluate the concept, we also add a user-friendly manual alignment of paper position on the underlying tablet computer The evaluation demonstrates that the system achieves almost perfect digitisation of strokes (98.6% of strokes were correctly registered with only 1.2% of ghost strokes) whilst maintaining excellent user experience of writing with a pencil on the paper.

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study’s results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022.

A precoding technique based on polar codes and probabilistic shaping is introduced for dirty paper coding. Two variants of the precoding use multi-level shaping and sign-bit shaping in one dimension. The decoder uses multi-stage successive-cancellation list decoding with list-passing across the bit levels. The approach achieves approximately the same frame error rates as polar codes with multi-level shaping over standard additive white Gaussian noise channels at a block length of 256 symbols and with different amplitude shift keying (ASK) constellations.

In this paper, the mechanical properties of nano-silica modified insulating paper under the combined action of mechanical vibration and temperature conditions are studied. Unmodified and nano-silica modified cellulose insulating paper with 2 wt% and 4 wt% were prepared, respectively, and a series of mechanical-thermal synergy experiments were carried out. With the same mechanical stress and temperature, and with the same aging duration of 144 h (6d), the tensile strength of modified insulating paper with 4 wt% nano-silica, increased 0.99 kN/m and 0.55 kN/m, respectively, compared with those of the unmodified and the 2 wt% nano-silica modified insulating paper. The experiments indicate that the nano-silica modification can effectively improve the mechanical properties of insulating paper. In this work, the modified mechanism of nano-silica is analyzed from the interface effect of modified polymer and the quantum effect of the modified polymer interface two aspects. It is shown that the interface formed in the modified insulating paper can transfer the mechanical stress acted on the insulating paper and prevent the cracks formed in the aging process of the test sample from further expansion, while the quantum effect discretizes the electron energy level, which can restrict the motion of the molecular chain segment to some extent. The conclusion can be used for reference to improve the performance of insulating paper.

Cellulosic insulating paper is the essential component of the insulation in power transformers. Under the thermal stress inside the transformer, the cellulosic insulating paper degrades and generates formic acid. Meanwhile, the presence of formic acid further accelerates the aging process of cellulosic insulating paper. This study takes the cellulose molecule composed of D-glucose as the research object. The ReaxFF reactive force field is applied to simulate the high-temperature thermal aging process of cellulosic insulating paper. During pyrolysis process, the number of formic acid molecules presents short-term fluctuations and continuous increases. Though simulation, the main reaction pathways of cellulose pyrolysis to generate formic acid are obtained. In addition, an accelerated thermal aging experiment of oil-paper insulation is designed. The formic acid in the experimental samples is detected by the silanization derivatization method. Through the combination of simulation and experimental results, the feasibility of formic acid as an aging indicator for cellulosic insulating paper is further demonstrated.

Free-standing reduced graphene oxide (rGO) papers were prepared by chemical reduction, thermal reduction and combined chemical-thermal reduction, respectively. Four-point probe and nanoindentation experiments were conducted to investigate the electrical and mechanical properties of rGO papers. The rGO paper prepared by soaking in L-ascorbic acid and thermal annealing in argon at 1000 °C (labeled rGO-AsA-T) showed superior electrical and mechanical properties when compared with rGO papers prepared merely by chemical reduction or thermal reduction. The as-prepared rGO-AsA-T paper exhibited an electrical conductivity of 5.7 × 104 S/m, showing an increase of 90% compared to that in the thermally annealed rGO paper and nearly 40 times that of rGO paper reduced by L-ascorbic acid. It was also found that the rGO-AsA-T paper had the lowest elastic modulus of 288 MPa, showing enhanced flexibility. The nearly free voids in rGO-AsA-T paper proved by scanning electron microscopy (SEM) were due to the capillary action in chemical reduction and were significant in improving the electrical conductivity and flexibility of the paper. The rGO-AsA-T paper with high conductivity and flexibility has a promising application in flexible electronics.

Zika virus (ZIKV), a positive-sense single-stranded RNA virus, has been declared as the cause of a ‘worldwide public health emergency’ by the WHO since the year 2016. In cases of acute infections, it has been found to cause Guillain–Barre syndrome and microcephaly. Considering the tropical occurrence of the infections, and the absence of any proper treatments, accurate and timely diagnosis is the only way to control this infectious disease. Currently, there are many diagnostic methods under investigation by the scientific community, but they have some major limitations, such as high cost, low specificity, and poor sensitivity. To overcome these limitations, we have presented a low-cost, simple-to-operate, and portable diagnosis system for its detection by utilizing silver nanoparticles. silver nanoparticles were synthesized via chemical methods and characterization was confirmed by UV/TEM and XRD. The paper platform was synthesized using a graphene-based conductive ink, methylene blue as the redox indicator, and a portable potentiostat to perform the cyclic voltammetry to ensure true point-of-care availability for patients in remote areas.

A simple, equipment-free, direct fluorometric method, employing paper-based analytical devices (PADs) as sensors, for the selective determination of quinine (QN) is described herein. The suggested analytical method exploits the fluorescence emission of QN without any chemical reaction after the appropriate pH adjustment with nitric acid, at room temperature, on the surface of a paper device with the application of a UV lamp at 365 nm. The devices crafted had a low cost and were manufactured with chromatographic paper and wax barriers, and the analytical protocol followed was extremely easy for the analyst and required no laboratory instrumentation. According to the methodology, the user must place the sample on the detection area of the paper and read with a smartphone the fluorescence emitted by the QN molecules. Many chemical parameters were optimized, and a study of interfering ions present in soft drink samples was carried out. Additionally, the chemical stability of these paper devices was considered in various maintenance conditions with good results. The detection limit calculated as 3.3 S/N was 3.6 mg L−1, and the precision of the method was satisfactory, being from 3.1% (intra-day) to 8.8% (inter-day). Soft drink samples were successfully analyzed and compared with a fluorescence method.

Traces of mercury ions in environmental water can harm humans and animals. Paper-based visual detection methods have been widely developed for the rapid detection of mercury ions; however, existing methods are not sensitive enough to be used in real environments. Here, we developed a novel, simple and effective visual fluorescent sensing paper-based chip for the ultrasensitive detection of mercury ions in environmental water. CdTe-quantum-dots-modified silica nanospheres were firmly absorbed by and anchored to the fiber interspaces on the paper’s surface to effectively avoid the unevenness caused by liquid evaporation. The fluorescence of quantum dots emitted at 525 nm can be selectively and efficiently quenched with mercury ions, and the ultrasensitive visual fluorescence sensing results attained using this principle can be captured using a smartphone camera. This method has a detection limit of 2.83 µg/L and a fast response time (90 s). We successfully achieved the trace spiking detection of seawater (from three regions), lake water, river water and tap water with recoveries in the range of 96.8–105.4% using this method. This method is effective, low-cost, user-friendly and has good prospects for commercial application. Additionally, the work is expected to be utilized in the automated big data collection of large numbers of environmental samples.

Hydrogen sulfide (H2S) is known to participate in bacteria-induced inflammatory response in periodontal diseases. Therefore, it is necessary to quantify H2S produced by oral bacteria for diagnosis and treatment of oral diseases including halitosis and periodontal disease. In this study, we introduce a paper-based colorimetric assay for detecting bacterial H2S utilizing silver/Nafion/polyvinylpyrrolidone membrane and a 96-well microplate. This H2S-sensing paper showed a good sensitivity (8.27 blue channel intensity/μM H2S, R2 = 0.9996), which was higher than that of lead acetate paper (6.05 blue channel intensity/μM H2S, R2 = 0.9959). We analyzed the difference in H2S concentration released from four kinds of oral bacteria (Eikenella corrodens, Streptococcus sobrinus, Streptococcus mutans, and Lactobacillus casei). Finally, the H2S level in Eikenella corrodens while varying the concentration of cysteine and treatment time was quantified. This paper-based colorimetric assay can be utilized as a simple and effective tool for in vitro screening of H2S-producing ability of many bacteria as well as salivary H2S analysis.

The outbreak of new viral strains promotes advances in universal diagnostic techniques for detecting infectious diseases with unknown viral sequence. Long double-stranded RNA (dsRNA), a hallmark of infections, serves as a virus marker for prompt detection of viruses with unknown genomes. Here, we report on-chip paper electrophoresis for ultrafast screening of infectious diseases. Negatively charged RNAs pass through the micro and nanoscale pores of cellulose in order of size under an external electric field applied to the paper microfluidic channel. Quantitative separation of long dsRNA mimicking poly I:C was analyzed from 1.67 to 33 ng·μL−1, which is close to the viral dsRNA concentration in infected cells. This paper-based capillary electrophoresis chip (paper CE chip) can provide a new diagnostic platform for ultrafast viral disease detection at the point-of-care (POC) level.

Sandwich-structured nanocomposites have the potential to improve the mechanical and electrical properties of materials simultaneously. Nanofibrillated cellulose (NFC) modified paper sheet (denominated as N) and softwood paper sheet (denominated as P) are used to prepare insulating paper. Different kinds of insulating paper with the structures of PPP, NNN, NPN and PNP are prepared. Tensile strength, DC conductivity, dielectric response, space charge and breakdown strength are measured. The activation energies of prepared materials are calculated through DC conductivity at 30, 50, 70, and 90 °C. The mechanism for sandwich structure regulating the mechanical and breakdown properties of insulating paper is discussed. Oil impregnated N/P/N paper has a remarkable improvement on tensile strength, conductivity, and DC breakdown strength, which provides a promising scheme to obtain the insulating paper with outstanding tensile and breakdown strength.

Cancer is a major cause of mortality and morbidity worldwide. Detection and quantification of cancer biomarkers plays a critical role in cancer early diagnosis, screening, and treatment. Clinicians, particularly in developing countries, deal with high costs and limited resources for diagnostic systems. Using low-cost substrates to develop sensor devices could be very helpful. The interest in paper-based sensors with colorimetric detection increased exponentially in the last decade as they meet the criteria for point-of-care (PoC) devices. Cellulose and different nanomaterials have been used as substrate and colorimetric probes, respectively, for these types of devices in their different designs as spot tests, lateral-flow assays, dipsticks, and microfluidic paper-based devices (μPADs), offering low-cost and disposable devices. However, the main challenge with these devices is their low sensitivity and lack of efficiency in performing quantitative measurements. This review includes an overview of the use of paper for the development of sensing devices focusing on colorimetric detection and their application to cancer biomarkers. We highlight recent works reporting the use of paper in the development of colorimetric sensors for cancer biomarkers, such as proteins, nucleic acids, and others. Finally, we discuss the main advantages of these types of devices and highlight their major pitfalls., This research was funded by Portuguese Foundation for Science and Technology (FCT), under the scope of the strategic funding of UIDB/04469/2020 unit and through Mariana Carneiro PhD grant reference SFRH/BD/131959/2017.

The salivary glands are closely associated with stress conditions and the neuroendocrine system. The concentrations of these salivary biomarkers fluctuate with a person’s disease status. Until now, salivary diagnostics have been promising; however, the analytical tools for detecting salivary biomarkers have remained burdensome due to the lack of user-friendly and cost-effective equipment. In this study, we used a microfluidic starch-coated paper-based chip to isolate ɑ-amylase from human saliva. The concentration of ɑ-amylase on the head and tail sections of the paper-based chip was compared in the presence or absence of starch. We found that ɑ-amylase was highly concentrated only in the head section of the starch-coated paper-based chip through Western blotting (WB) and enzyme-linked immunosorbent assay (ELISA). We expect our designed paper-based chip will aid in α-amylase detection technologies using saliva and small amounts of other biofluids including blood, tears, pancreatic juice, and urine.

In this work, we report the manufacturing and experimental analysis of low-cost and eco-friendly paper-based gas sensors for food smart packaging. The hygroscopic properties of paper help detecting the presence of water-soluble gases in an environment provided with relative humidity (RH) above a given threshold (RH > 75%) and discovering the presence of gaseous-markers of the food-spoilage process, like ammonia. Carbon interdigitated electrodes were printed by Aerosol Jet Printing and sintered by Flash Lamp Annealing on chromatographic paper, obtaining a mean resistance value of (231 +/- 20) kOhm; and (249 +/- 28) kOhm; for the left and the right electrode, respectively. After being tested at different RH values (75, 80, 90, 100%), and once stabilized, they were tested with different ammonia concentrations (3, 6, 9, and 12 ppm). A proportional resistance decrease was evidenced in increasing ammonia concentration. Considering the baseline at a constant value of RH=75%, the sensors showed a resistance variation of 12% in presence of the lowest concentration of 3 ppm. Three different temperatures were considered during the tests, 5 degC, 15 degC, and 25 degC, evidencing no primary influence of this parameter. Ethanol and acetone were investigated as representatives of interfering compounds such as alcohols and ketones that may be developed during food spoilage. Good selectivity was observed both by studying these compounds individually and together with ammonia. Experimental results showed that 48 ppm of acetone induced a resistance change lower than 3 ppm of ammonia, while 240 ppm of ethanol induced a resistance change comparable to 12 ppm of ammonia.

The development of industry and of the Internet of Things (IoTs) have brought energy issues and huge challenges to the environment. The emergence of triboelectric nanogenerators (TENGs) has attracted wide attention due to their advantages, such as self-powering, lightweight, and facile fabrication. Similarly to paper and other fiber-based materials, which are biocompatible, biodegradable, environmentally friendly, and are everywhere in daily life, paper-based TENGs (P-TENGs) have shown great potential for various energy harvesting and interactive applications. Here, a detailed summary of P-TENGs with two-dimensional patterns and three-dimensional structures is reported. P-TENGs have the potential to be used in many practical applications, including self-powered sensing devices, human–machine interaction, electrochemistry, and highly efficient energy harvesting devices. This leads to a simple yet effective way for the next generation of energy devices and paper electronics.

The objective of the research carried out in this paper highlights the critical sustainability parameter of reusability of waste materials in the construction sector of India. This paper followed firstly the intense literature survey to identify the waste materials for the replacement in the concrete mix, hereafter Paper Pulp (P.P) and Crusher Dust (C.D) indicates the similar nature like cement and sand respectively. Secondly, an assumed proportion of replacement of P.P by 2.5%, 5%,7.5%,10%, and 12.5% by cement, and 10%, 20%, and 30% replacement of C.D by sand is adopted in M20 mix design by volume method. Thirdly, the casting of 48 sample cubes size of 150 mm × 150 mm × 150 mm is performed for Average Compressive Strength test, and casting of 48 cylindrical cubes of 150 mm in diameter and 300 mm long for Split Tensile Strength. Fourthly, the results are carried out for 7th day testing along with 28th day testing for both tests along with slump variation of different samples. It is observed after the experimental analysis that the elite results compared to normal M20 mix are exhibited when the replacement variation of P.P is 5% along with 10% variation of C.D for both Average Compressive Strength and Split Tensile test. In addition to it, the highest slump is obtained for replacement variation of 12.5% P.P and 10%C.D.

The paper describes the development of an electrochemical sensor to be used for the determination of synthetic food colorants such as Sunset Yellow FCF (SY) and Tartrazine (TZ). The sensor is a carbon paper (CP) electrode, manufactured by using hot lamination technology and volume modified with fine-grained graphite powder (GrP). The sensor (GrP/CP) was characterized by scanning electron microscopy, energy dispersive spectrometry, electrochemical impedance analysis, cyclic, linear sweep and differential pulse voltammetry. The mechanism of SY and TZ electrochemical oxidation on GrP/CP was studied. The developed sensor has good electron transfer characteristics and low electron resistance, high sensitivity and selectivity. Applying the differential pulse mode, linear dynamic ranges of 0.005–1.0 μM and 0.02–7.5 μM with limits of detection of 0.78 nM and 8.2 nM for SY and TZ, respectively, were obtained. The sensor was used to detect SY and TZ in non-alcoholic and alcoholic drinks. The results obtained from drink analysis prove good reproducibility (RSD ≤ 0.072) and accuracy (recovery 96–104%).

Fluid control on a paper channel is necessary for analysis with multiple reagents, such as enzyme-linked immunosorbent assay (ELISA) in microfluidic paper-based analytical devices (µPADs). In this study, a thermo-responsive valve was fabricated by polymerizing N-isopropylacrylamide on a PVDF porous membrane by plasma-induced graft polymerization. The polymerized membrane was observed by scanning electron microscopy (SEM), and it was confirmed that more pores were closed at temperatures below 32 °C and more pores were opened at temperatures above 32 °C. Valve permeability tests confirmed that the proposed polymerized membrane was impermeable to water and proteins at temperatures below 32 °C and permeable to water at temperatures above 32 °C. The valve could also be reversibly and repeatedly opened and closed by changing the temperature near 32 °C. These results suggest that plasma-induced graft polymerization may be used to produce thermo-responsive valves that can be opened and closed without subsequent loss of performance. These results indicate that the thermo-responsive valve fabricated by plasma-induced graft polymerization could potentially be applied to ELISA with µPADs.

A current challenge regarding microfluidic paper-based analytical devices (µPAD) for blood plasma separation (BPS) and electrochemical immunodetection of protein biomarkers is how to achieve a µPAD that yields enough plasma to retain the biomarker for affinity biosensing in a functionalized electrode system. This paper describes the development of a BPS µPAD to detect and quantify the S100B biomarker from peripheral whole blood. The device uses NaCl functionalized VF2 filter paper as a sample collection pad, an MF1 filter paper for plasma retention, and an optimized microfluidic channel geometry. An inverted light microscope, scanning electron microscope (SEM), and image processing software were used for visualizing BPS efficiency. A design of experiments (DOE) assessed the device’s efficacy using an S100B ELISA Kit to measure clinically relevant S100B concentrations in plasma. The BPS device obtained 50 μL of plasma from 300 μL of whole blood after 3.5 min. The statistical correlation of S100B concentrations obtained using plasma from standard centrifugation and the BPS device was 0.98. The BPS device provides a simple manufacturing protocol, short fabrication time, and is capable of S100B detection using ELISA, making one step towards the integration of technologies aimed at low-cost POC testing of clinically relevant biomarkers.

In recent years, the wide application of deep neural network models has brought serious risks of intellectual property rights infringement. Embedding a watermark in a network model is an effective solution to protect intellectual property rights. Although researchers have proposed schemes to add watermarks to models, they cannot prevent attackers from adding and overwriting original information, and embedding rates cannot be quantified. Therefore, aiming at these problems, this paper designs a high embedding rate and tamper-proof watermarking scheme. We employ wet paper coding (WPC), in which important parameters are regarded as wet blocks and the remaining unimportant parameters are regarded as dry blocks in the model. To obtain the important parameters more easily, we propose an optimized probabilistic selection strategy (OPSS). OPSS defines the unimportant-level function and sets the importance threshold to select the important parameter positions and to ensure that the original function is not affected after the model parameters are changed. We regard important parameters as an unmodifiable part, and only modify the part that includes the unimportant parameters. We selected the MNIST, CIFAR-10, and ImageNet datasets to test the performance of the model after adding a watermark and to analyze the fidelity, robustness, embedding rate, and comparison schemes of the model. Our experiment shows that the proposed scheme has high fidelity and strong robustness along with a high embedding rate and the ability to prevent malicious tampering.

Laser-induced graphene (LIG) is a foam-like porous material consisting of few-layer graphene obtained by laser irradiation of a wide range of carbon-containing substrates. Among these, the ability to synthesize LIG from paper and other cellulose-related materials is particularly exciting, as it opens the door to a wide assortment of potential applications in the form of low-cost, flexible, and biodegradable devices. Here, the synthesis of this material, dubbed paper-LIG, on different types of filter papers and xylan biopolymer is discussed. In particular, we report the formation of paper-LIG by single-step irradiation, providing an improvement over the conventional multiple lasing approach and giving an explanation of the conditions that allow this simplified synthesis. All the relevant process parameters are covered, assessing their effect on the resulting electrical properties, structure, and morphology. Additionally, we demonstrate the application of LIG obtained from xylan, an abundant and often underutilized biopolymer, for temperature sensing. These results provide a better understanding of the conditions required for the synthesis of highly conductive LIG from paper and related materials, paving the way for its application, with reduced cost and low environmental impact, in fields ranging from biomonitoring to consumer electronics. published

Nano devices are used for energy generation, storing, and harvesting. Among other metal oxides, ZnO shows high performance in piezoelectric energy generation. In this work, the analysis of the parameter dependency of the amount of energy generated for a piezoelectric material on a paper flexible substrate is done. The load is applied in the shape of lines and alphabets. It is found that the displacement is directly proportional to the generated energy. The role of surface area in producing energy and the distribution of pressure with respect to material strength are added.

Given the recent events worldwide due to viral diseases that affect human health, automatic monitoring systems are one of the strong points of research that has gained strength, where the detection of biohazardous waste of a sanitary nature is highlighted related to viral diseases stands out. It is essential in this field to generate developments aimed at saving lives, where robotic systems can operate as assistants in various fields. In this work an artificial intelligence algorithm based on two stages is presented, one is the recognition of paper debris using a ResNet-50, chosen for its object localization capacity, and the other is a fuzzy inference system for the generation of alarm states due to biological risk by such debris, where fuzzy logic helps to establish a model for a non-predictive system as the one exposed. A biohazard detection algorithm for paper waste is described, oriented to operate on an assistive robot in a residential environment. The training parameters of the network, which achieve 100% accuracy with confidence levels between 82% for very small waste and 100% in direct view, are presented. Timing cycles are established for validation of the exposure time of the waste, where through the fuzzy system, risk alarms are generated, which allows establishing a system with an average reliability of 98%.

In this paper, the paper cups were used as the research objects, and the machine vision detection technology was combined with different image processing techniques to investigate a non-contact optical automatic detection system to identify the defects of the manufactured paper cups. The combined ring light was used as the light source, an infrared (IR) LED matrix panel was used to provide the IR light to constantly highlight the outer edges of the detected objects, and a multi-grid pixel array was used as the image sensor. The image processing techniques, including the Gaussian filter, Sobel operator, Binarization process, and connected component, were used to enhance the inspection and recognition of the defects existing in the produced paper cups. There were three different detection processes for paper cups, which were divided into internal, external, and bottom image acquisition processes. The present study demonstrated that all the detection processes could clearly detect the surface defect features of the manufactured paper cups, such as dirt, burrs, holes, and uneven thickness. Our study also revealed that the average time for the investigated Automatic Optical Detection to detect the defects on the paper cups was only 0.3 s.